diff options
Diffstat (limited to 'nuttx/Documentation/NuttX.html')
-rw-r--r-- | nuttx/Documentation/NuttX.html | 88 |
1 files changed, 48 insertions, 40 deletions
diff --git a/nuttx/Documentation/NuttX.html b/nuttx/Documentation/NuttX.html index 473c22122..6957f1efb 100644 --- a/nuttx/Documentation/NuttX.html +++ b/nuttx/Documentation/NuttX.html @@ -1642,16 +1642,18 @@ Refer to the <a href="http://www.freescale.com/webapp/sps/site/prod_summary.jsp?code=KWIKSTIK-K40">Freescale web site</a> for further information about this board. The Kwikstik is used with the FreeScale Tower System (mostly just to provide a simple UART connection) </p> - <p> - <b>STATUS:</b> - The unverified KwikStik K40 first appeared in NuttX-6.8 - As of this writing, the basic port is complete but I accidentally locked my board during the initial bringup. - Further development is stalled unless I learn how to unlock the device (or until I get another K40). - Additional work remaining includes, among other things: (1) complete the basic bring-up, - (2) bring up the NuttShell NSH, (3) develop support for the SDHC-based SD card, - (4) develop support for USB host and device, and (2) develop an LCD driver. - NOTE: Some of these remaining tasks are shared with the K60 work described below. - </p> + <ul> + <p> + <b>STATUS:</b> + The unverified KwikStik K40 first appeared in NuttX-6.8 + As of this writing, the basic port is complete but I accidentally locked my board during the initial bringup. + Further development is stalled unless I learn how to unlock the device (or until I get another K40). + Additional work remaining includes, among other things: (1) complete the basic bring-up, + (2) bring up the NuttShell NSH, (3) develop support for the SDHC-based SD card, + (4) develop support for USB host and device, and (2) develop an LCD driver. + NOTE: Some of these remaining tasks are shared with the K60 work described below. + </p> + </ul> </td> </tr> <tr> @@ -1667,18 +1669,20 @@ Refer to the <a href="http://www.freescale.com/webapp/sps/site/prod_summary.jsp?code=TWR-K60N512-KIT">Freescale web site</a> for further information about this board. The TWR-K60N51 includes with the FreeScale Tower System which provides (among other things) a DBP UART connection. </p> - <p> - <b>STATUS:</b> - As of this writing, the basic port is complete and passes the NuttX OS test. - An additional, validated configuration exists for the NuttShell (NSH, see the - <a href="http://www.nuttx.org/NuttShell.html">NSH User Guide</a>). - This basic TWR-K60N512 first appeared in NuttX-6.8. - Ethernet and SD card (SDHC) drivers also exist: - The SDHC driver is partially integrated in to the NSH configuration but has some outstanding issues; - the Ethernet driver is completely untested. - Additional work remaining includes: (1) integrate the Ethernet and SDHC drivers, and (2) develop support for USB host and device. - NOTE: Most of these remaining tasks (excluding the Ethernet driver) are the same as the pending K40 tasks described above. - </p> + <ul> + <p> + <b>STATUS:</b> + As of this writing, the basic port is complete and passes the NuttX OS test. + An additional, validated configuration exists for the NuttShell (NSH, see the + <a href="http://www.nuttx.org/NuttShell.html">NSH User Guide</a>). + This basic TWR-K60N512 first appeared in NuttX-6.8. + Ethernet and SD card (SDHC) drivers also exist: + The SDHC driver is partially integrated in to the NSH configuration but has some outstanding issues; + the Ethernet driver is completely untested. + Additional work remaining includes: (1) integrate the Ethernet and SDHC drivers, and (2) develop support for USB host and device. + NOTE: Most of these remaining tasks (excluding the Ethernet driver) are the same as the pending K40 tasks described above. + </p> + </ul> </td> </tr> <tr> @@ -1693,18 +1697,20 @@ This port uses the Freescale STMicro STM3240G-EVAL board featuring the STM32F407IGH6 MCU. Refer to the <a href="http://www.st.com/internet/evalboard/product/252216.jsp">STMicro web site</a> for further information about this board. </p> - <p> - <b>STATUS:</b> - As of this writing, the basic port is complete and first appeared in NuttX-6.12. - The port passes the NuttX OS test and includes a validated configuration for the NuttShell (NSH, see the - <a href="http://www.nuttx.org/NuttShell.html">NSH User Guide</a>). - Additional drivers and configurations were added in NuttX 6.13. - Drivers include an Ethernet driver, ADC driver, DAC driver, PWM driver, CAN driver, F4 RTC driver - (most of these are compatible with the F1 family as well). - That release also included F4 DMA support and logic for saving/restoring F4 FPU registers in context switches. - Networking intensions include support for Telnet NSH sessions and new configurations for DHPCD and the networking test (nettest). - A more complete port would include support for SDIO and USB OTG which are not available in NuttX 6.13. - </p> + <ul> + <p> + <b>STATUS:</b> + As of this writing, the basic port is complete and first appeared in NuttX-6.12. + The port passes the NuttX OS test and includes a validated configuration for the NuttShell (NSH, see the + <a href="http://www.nuttx.org/NuttShell.html">NSH User Guide</a>). + Additional drivers and configurations were added in NuttX 6.13. + Drivers include an Ethernet driver, ADC driver, DAC driver, PWM driver, CAN driver, F4 RTC driver + (most of these are compatible with the F1 family as well). + That release also included F4 DMA support and logic for saving/restoring F4 FPU registers in context switches. + Networking intensions include support for Telnet NSH sessions and new configurations for DHPCD and the networking test (nettest). + A more complete port would include support for SDIO and USB OTG which are not available in NuttX 6.13. + </p> + </ul> </td> </tr> <tr> @@ -1720,11 +1726,13 @@ It will used the STMicor STM32F4-Discovery board featuring the STM32F407VGT6 MCU. Refer to the <a href="http://www.st.com/internet/evalboard/product/252419.jsp">STMicro web site</a> for further information about this board. </p> - <p> - <b>STATUS:</b> - This is really a vapor ware, pre-announcement. - I have the hardware and the motivation and I expect to announce the availability of support the STM32F4-Discovery in a later NuttX release. - </p> + <ul> + <p> + <b>STATUS:</b> + This is really a vapor ware, pre-announcement. + I have the hardware and the motivation and I expect to announce the availability of support the STM32F4-Discovery in a later NuttX release. + </p> + </ul> </td> </tr> <tr> @@ -1738,7 +1746,7 @@ <b>Development Environments:</b> 1) Linux with native Linux GNU toolchain, 2) Cygwin with Cygwin GNU Cortex-M3 or 4toolchain, or 3) Cygwin with Windows native GNU Cortex-M3 or M4 toolchain (CodeSourcery or devkitARM). A DIY toolchain for Linux or Cygwin is provided by the NuttX <a href="http://sourceforge.net/projects/nuttx/files/buildroot/">buildroot</a> package. - I use FreeScale's <i>CodeWarrior</i> IDE only to work with the JTAG debugger built into the boards. + I use FreeScale's <i>CodeWarrior</i> IDE only to work with the JTAG debugger built into the Kinetis boards. </p> </td> </tr> |