diff options
Diffstat (limited to 'nuttx/Documentation/NuttX.html')
-rw-r--r-- | nuttx/Documentation/NuttX.html | 8 |
1 files changed, 4 insertions, 4 deletions
diff --git a/nuttx/Documentation/NuttX.html b/nuttx/Documentation/NuttX.html index b7d752cce..f63f673a0 100644 --- a/nuttx/Documentation/NuttX.html +++ b/nuttx/Documentation/NuttX.html @@ -2612,7 +2612,7 @@ nsh> Configurations available include include a verified NuttShell (NSH) configuration (see the <a href="http://www.nuttx.org/Documentation/NuttShell.html">NSH User Guide</a>). The NSH configuration supports the Nucleus2G's microSD slot and additional configurations - are available to exercise the the USB serial and USB mass storage devices. + are available to exercise the USB serial and USB mass storage devices. However, due to some technical reasons, neither the SPI nor the USB device drivers are fully verified. (Although they have since been verfiied on other platforms; this needs to be revisited on the Nucleus2G). </p> @@ -2660,7 +2660,7 @@ nsh> for USB serial deive and USB storage devices examples, and for the USB host HID keyboard driver. Support for the USB host mass storage device can optionally be configured for the NSH example. A driver for the <i>Nokia 6100 LCD</i> and an NX graphics configuration for the Olimex LPC1766-STK have been added. - However, neither the LCD driver nor the NX configuration have been verified as of the the NuttX-5.17 release. + However, neither the LCD driver nor the NX configuration have been verified as of the NuttX-5.17 release. </p> </li> <li> @@ -4219,7 +4219,7 @@ Other memory: so that is it compatible with the SPI drivers of other MCUs (2013-6-16). * configs/sam3u-ek/src/up_touchscreen.c and configs/sam4l-xplained/src/sam_mmcsd.c: - Changed needed because of the above change the the SAM3/4 SPI + Changed needed because of the above change to the SAM3/4 SPI interface (2013-6-16). * drivers/input/ads7843e.c: Remove the wait for the touchscreen busy bit. I don't see the busy bit changing on the SAM3U-EK board. But @@ -4448,7 +4448,7 @@ Other memory: * The sama5d3x-ek/hello now runs correctly (2013-7-28). * configs/sama5d3x-ek/ostest/: This configuration has been modified to run out NOR flash. More work is still needed to reconfigure the - SMC so the the NOR flash can work with the high clock (2013-7-28). + SMC so that the NOR flash can work with the high clock (2013-7-28). * arch/arm/src/sama5/sam_clockconfig.c/h and configs/sama5d3x-ek/src/sam_norflash.c: Add a file structure that will (eventually) support reconfiguration of NOR flash when NuttX |