diff options
Diffstat (limited to 'nuttx/arch/arm/src/stm32/stm32_allocateheap.c')
-rw-r--r-- | nuttx/arch/arm/src/stm32/stm32_allocateheap.c | 133 |
1 files changed, 124 insertions, 9 deletions
diff --git a/nuttx/arch/arm/src/stm32/stm32_allocateheap.c b/nuttx/arch/arm/src/stm32/stm32_allocateheap.c index 6a29fb16c..3eed90dd4 100644 --- a/nuttx/arch/arm/src/stm32/stm32_allocateheap.c +++ b/nuttx/arch/arm/src/stm32/stm32_allocateheap.c @@ -58,7 +58,7 @@ * following definitions must be provided to specify the size and * location of internal(system) SRAM: * - * CONFIG_DRAM_END : End address (+1) of SRAM (F1 family only, the + * SRAM1_END : End address (+1) of SRAM (F1 family only, the * : F4 family uses the a priori end of SRAM) * * The F4 family also contains internal CCM SRAM. This SRAM is different @@ -88,7 +88,7 @@ #endif /* For the STM312F10xxx family, all internal SRAM is in one contiguous block - * starting at g_idle_topstack and extending through CONFIG_DRAM_END (my apologies for + * starting at g_idle_topstack and extending through SRAM1_END (my apologies for * the bad naming). In addition, external FSMC SRAM may be available. */ @@ -96,7 +96,7 @@ /* Set the end of system SRAM */ -# define SRAM1_END CONFIG_DRAM_END +# define SRAM1_END SRAM1_END /* Check if external FSMC SRAM is provided */ @@ -130,7 +130,7 @@ /* Set the end of system SRAM */ -# define SRAM1_END CONFIG_DRAM_END +# define SRAM1_END SRAM1_END /* Set the range of CCM SRAM as well (although we may not use it) */ @@ -365,14 +365,113 @@ * If a protected kernel-space heap is provided, the kernel heap must be * allocated (and protected) by an analogous up_allocate_kheap(). * + * The following memory map is assumed for the flat build: + * + * .data region. Size determined at link time. + * .bss region Size determined at link time. + * IDLE thread stack. Size determined by CONFIG_IDLETHREAD_STACKSIZE. + * Heap. Extends to the end of SRAM. + * + * The following memory map is assumed for the kernel build: + * + * Kernel .data region. Size determined at link time. + * Kernel .bss region Size determined at link time. + * Kernel IDLE thread stack. Size determined by CONFIG_IDLETHREAD_STACKSIZE. + * Padding for alignment + * User .data region. Size determined at link time. + * User .bss region Size determined at link time. + * Kernel heap. Size determined by CONFIG_MM_KERNEL_HEAPSIZE. + * User heap. Extends to the end of SRAM. + * ****************************************************************************/ void up_allocate_heap(FAR void **heap_start, size_t *heap_size) { +#if defined(CONFIG_NUTTX_KERNEL) && defined(CONFIG_MM_KERNEL_HEAP) + /* Get the unaligned size and position of the user-space heap. + * This heap begins after the user-space .bss section at an offset + * of CONFIG_MM_KERNEL_HEAPSIZE (subject to alignment). + */ + + uintptr_t ubase = (uintptr_t)USERSPACE->us_bssend + CONFIG_MM_KERNEL_HEAPSIZE; + size_t usize = SRAM1_END - ubase; + int log2; + + DEBUGASSERT(ubase < (uintptr_t)SRAM1_END); + + /* Adjust that size to account for MPU alignment requirements. + * NOTE that there is an implicit assumption that the SRAM1_END + * is aligned to the MPU requirement. + */ + + log2 = (int)mpu_log2regionfloor(usize); + DEBUGASSERT((SRAM1_END & ((1 << log2) - 1)) == 0); + + usize = (1 << log2); + ubase = SRAM1_END - usize; + + /* Return the user-space heap settings */ + + up_ledon(LED_HEAPALLOCATE); + *heap_start = (FAR void*)ubase; + *heap_size = usize; + + /* Allow user-mode access to the user heap memory */ + + stm32_mpu_uheap((uintptr_t)ubase, usize); +#else + + /* Return the heap settings */ + up_ledon(LED_HEAPALLOCATE); *heap_start = (FAR void*)g_idle_topstack; *heap_size = SRAM1_END - g_idle_topstack; +#endif +} + +/**************************************************************************** + * Name: up_allocate_kheap + * + * Description: + * For the kernel build (CONFIG_NUTTX_KERNEL=y) with both kernel- and + * user-space heaps (CONFIG_MM_KERNEL_HEAP=y), this function allocates + * (and protects) the kernel-space heap. + * + ****************************************************************************/ + +#if defined(CONFIG_NUTTX_KERNEL) && defined(CONFIG_MM_KERNEL_HEAP) +void up_allocate_kheap(FAR void **heap_start, size_t *heap_size) +{ + /* Get the unaligned size and position of the user-space heap. + * This heap begins after the user-space .bss section at an offset + * of CONFIG_MM_KERNEL_HEAPSIZE (subject to alignment). + */ + + uintptr_t ubase = (uintptr_t)USERSPACE->us_bssend + CONFIG_MM_KERNEL_HEAPSIZE; + size_t usize = SRAM1_END - ubase; + int log2; + + DEBUGASSERT(ubase < (uintptr_t)SRAM1_END); + + /* Adjust that size to account for MPU alignment requirements. + * NOTE that there is an implicit assumption that the SRAM1_END + * is aligned to the MPU requirement. + */ + + log2 = (int)mpu_log2regionfloor(usize); + DEBUGASSERT((SRAM1_END & ((1 << log2) - 1)) == 0); + + usize = (1 << log2); + ubase = SRAM1_END - usize; + + /* Return the kernel heap settings (i.e., the part of the heap region + * that was not dedicated to the user heap). + */ + + *heap_start = (FAR void*)USERSPACE->us_bssend; + *heap_size = ubase - (uintptr_t)USERSPACE->us_bssend; } +#endif /**************************************************************************** * Name: up_addregion @@ -386,16 +485,32 @@ void up_allocate_heap(FAR void **heap_start, size_t *heap_size) #if CONFIG_MM_REGIONS > 1 void up_addregion(void) { - /* Add the STM32F20xxx/STM32F40xxx CCM SRAM heap region. */ - #ifndef CONFIG_STM32_CCMEXCLUDE - kmm_addregion((FAR void*)SRAM2_START, SRAM2_END-SRAM2_START); +#if defined(CONFIG_NUTTX_KERNEL) && defined(CONFIG_MM_KERNEL_HEAP) + + /* Allow user-mode access to the STM32F20xxx/STM32F40xxx CCM SRAM heap */ + + stm32_mpu_uheap((uintptr_t)SRAM2_START, SRAM2_END-SRAM2_START); + #endif - /* Add the external FSMC SRAM heap region. */ + /* Add the STM32F20xxx/STM32F40xxx CCM SRAM user heap region. */ + + kumm_addregion((FAR void*)SRAM2_START, SRAM2_END-SRAM2_START); +#endif #ifdef CONFIG_STM32_FSMC_SRAM - kmm_addregion((FAR void*)CONFIG_HEAP2_BASE, CONFIG_HEAP2_SIZE); +#if defined(CONFIG_NUTTX_KERNEL) && defined(CONFIG_MM_KERNEL_HEAP) + + /* Allow user-mode access to the FSMC SRAM user heap memory */ + + stm32_mpu_uheap((uintptr_t)CONFIG_HEAP2_BASE, CONFIG_HEAP2_SIZE); + +#endif + + /* Add the external FSMC SRAM user heap region. */ + + kumm_addregion((FAR void*)CONFIG_HEAP2_BASE, CONFIG_HEAP2_SIZE); #endif } #endif |