diff options
Diffstat (limited to 'nuttx/arch/sh/src/m16c/m16c_serial.c')
-rw-r--r-- | nuttx/arch/sh/src/m16c/m16c_serial.c | 102 |
1 files changed, 51 insertions, 51 deletions
diff --git a/nuttx/arch/sh/src/m16c/m16c_serial.c b/nuttx/arch/sh/src/m16c/m16c_serial.c index 0027d423a..a725d6217 100644 --- a/nuttx/arch/sh/src/m16c/m16c_serial.c +++ b/nuttx/arch/sh/src/m16c/m16c_serial.c @@ -63,7 +63,7 @@ * not have serial ports but supports a console through, say, an LCD. */ -#if !defined(CONFIG_UART0_DISABLE) && !defined(CONFIG_UART1_DISABLE) && !defined(CONFIG_UART2_DISABLE) +#if defined(CONFIG_M16C_UART0) || defined(CONFIG_M16C_UART1) || defined(CONFIG_M16C_UART2) /**************************************************************************** * Definitions @@ -100,24 +100,24 @@ /* Are there any UARTs? */ -#if defined(CONFIG_UART0_DISABLE) && defined(CONFIG_UART1_DISABLE) && defined(CONFIG_UART2_DISABLE) +#if !defined(CONFIG_M16C_UART0) && !defined(CONFIG_M16C_UART1) && !defined(CONFIG_M16C_UART2) # ifdef USE_SERIALDRIVER -# error "Serial driver selected, but UARTs not enabled" +# error "Serial driver selected, but No UARTs is enabled" # undef USE_SERIALDRIVER # endif #endif /* Is there a serial console? */ -#if defined(CONFIG_UART0_SERIAL_CONSOLE) && !defined(CONFIG_UART0_DISABLE) +#if defined(CONFIG_UART0_SERIAL_CONSOLE) && defined(CONFIG_M16C_UART0) # define HAVE_SERIALCONSOLE 1 # undef CONFIG_UART1_SERIAL_CONSOLE # undef CONFIG_UART2_SERIAL_CONSOLE -#elif defined(CONFIG_UART1_SERIAL_CONSOLE) && !defined(CONFIG_UART1_DISABLE) +#elif defined(CONFIG_UART1_SERIAL_CONSOLE) && defined(CONFIG_M16C_UART1) # define HAVE_SERIALCONSOLE 1 # undef CONFIG_UART0_SERIAL_CONSOLE # undef CONFIG_UART2_SERIAL_CONSOLE -#elif defined(CONFIG_UART2_SERIAL_CONSOLE) && !defined(CONFIG_UART2_DISABLE) +#elif defined(CONFIG_UART2_SERIAL_CONSOLE) && defined(CONFIG_M16C_UART2) # define HAVE_SERIALCONSOLE 1 # undef CONFIG_UART0_SERIAL_CONSOLE # undef CONFIG_UART1_SERIAL_CONSOLE @@ -141,18 +141,18 @@ /* Which UART with be tty0/console and which tty1 and tty2? */ -/* CONFIG_UART0_SERIAL_CONSOLE (implies CONFIG_UART0_DISABLE also un-defined) */ +/* CONFIG_UART0_SERIAL_CONSOLE (implies CONFIG_M16C_UART0 also defined) */ #if defined(CONFIG_UART0_SERIAL_CONSOLE) # define CONSOLE_DEV g_uart0port /* UART0 is console */ # define TTYS0_DEV g_uart0port /* UART0 is tty0 */ -# ifndef CONFIG_UART1_DISABLE +# ifdef CONFIG_M16C_UART1 # define TTYS1_DEV g_uart1port /* UART1 is tty1 */ -# ifndef CONFIG_UART2_DISABLE +# ifdef CONFIG_M16C_UART2 # define TTYS2_DEV g_uart2port /* UART2 is tty2 */ # endif # else -# ifndef CONFIG_UART2_DISABLE +# ifdef CONFIG_M16C_UART2 # define TTYS2_DEV g_uart2port /* UART2 is tty1 */ # else # undef TTYS1_DEV /* No tty1 */ @@ -160,18 +160,18 @@ # undef TTYS2_DEV /* No tty2 */ # endif -/* CONFIG_UART1_SERIAL_CONSOLE (implies CONFIG_UART1_DISABLE also un-defined) */ +/* CONFIG_UART1_SERIAL_CONSOLE (implies CONFIG_M16C_UART1 also defined) */ #elif defined(CONFIG_UART1_SERIAL_CONSOLE) # define CONSOLE_DEV g_uart1port /* UART1 is console */ # define TTYS0_DEV g_uart1port /* UART1 is tty0 */ -# ifndef CONFIG_UART0_DISABLE +# ifdef CONFIG_M16C_UART0 # define TTYS1_DEV g_uart0port /* UART0 is tty1 */ -# ifndef CONFIG_UART2_DISABLE +# ifdef CONFIG_M16C_UART2 # define TTYS2_DEV g_uart2port /* UART2 is tty2 */ # endif # else -# ifndef CONFIG_UART2_DISABLE +# ifdef CONFIG_M16C_UART2 # define TTYS2_DEV g_uart2port /* UART2 is tty1 */ # else # undef TTYS1_DEV /* No tty1 */ @@ -179,18 +179,18 @@ # undef TTYS2_DEV /* No tty2 */ # endif -/* CONFIG_UART2_SERIAL_CONSOLE (implies CONFIG_UART2_DISABLE also un-defined) */ +/* CONFIG_UART2_SERIAL_CONSOLE (implies CONFIG_M16C_UART2 also defined) */ #elif defined(CONFIG_UART2_SERIAL_CONSOLE) # define CONSOLE_DEV g_uart2port /* UART2 is console */ # define TTYS0_DEV g_uart2port /* UART2 is tty0 */ -# ifndef CONFIG_UART0_DISABLE +# ifdef CONFIG_M16C_UART0 # define TTYS1_DEV g_uart0port /* UART0 is tty1 */ -# ifndef CONFIG_UART1_DISABLE +# ifdef CONFIG_M16C_UART1 # define TTYS2_DEV g_uart1port /* UART1 is tty2 */ # endif # else -# ifndef CONFIG_UART1_DISABLE +# ifdef CONFIG_M16C_UART1 # define TTYS1_DEV g_uart1port /* UART1 is tty1 */ # else # undef TTYS1_DEV /* No tty1 */ @@ -198,18 +198,18 @@ # undef TTYS2_DEV /* No tty2 */ # endif -/* No console, at least one of CONFIG_UART0/1/2_DISABLE defined */ +/* No console, at least one of CONFIG_M16C_UART0/1/2 defined */ -#elif !defined(CONFIG_UART0_DISABLE) +#elif defined(CONFIG_M16C_UART0) # undef CONSOLE_DEV /* No console */ # define TTYS0_DEV g_uart0port /* UART0 is tty0 */ -# ifndef CONFIG_UART1_DISABLE +# ifdef CONFIG_M16C_UART1 # define TTYS1_DEV g_uart1port /* UART1 is tty1 */ -# ifndef CONFIG_UART2_DISABLE +# ifdef CONFIG_M16C_UART2 # define TTYS2_DEV g_uart2port /* UART2 is tty2 */ # endif # else -# ifndef CONFIG_UART2_DISABLE +# ifdef CONFIG_M16C_UART2 # define TTYS1_DEV g_uart1port /* UART2 is tty1 */ # else # undef TTYS1_DEV /* No tty1 */ @@ -217,17 +217,17 @@ # undef TTYS2_DEV /* No tty2 */ # endif -elif !defined(CONFIG_UART1_DISABLE) +elif defined(CONFIG_M16C_UART1) # undef CONSOLE_DEV /* No console */ # undef TTYS2_DEV /* No tty2 */ # define TTYS0_DEV g_uart1port /* UART1 is tty0 */ -# ifndef CONFIG_UART2_DISABLE +# ifdef CONFIG_M16C_UART2 # define TTYS1_DEV g_uart2port /* UART2 is tty1 */ # else # undef TTYS1_DEV /* No tty1 */ # endif -/* Otherwise, there is no console and only CONFIG_UART2_DISABLE is un-defined */ +/* Otherwise, there is no console and only CONFIG_M16C_UART2 is defined */ #else # undef CONSOLE_DEV /* No console */ @@ -300,22 +300,22 @@ struct uart_ops_s g_uart_ops = /* I/O buffers */ -#ifndef CONFIG_UART0_DISABLE +#ifdef CONFIG_M16C_UART0 static char g_uart0rxbuffer[CONFIG_UART0_RXBUFSIZE]; static char g_uart0txbuffer[CONFIG_UART0_TXBUFSIZE]; #endif -#ifndef CONFIG_UART1_DISABLE +#ifdef CONFIG_M16C_UART1 static char g_uart1rxbuffer[CONFIG_UART1_RXBUFSIZE]; static char g_uart1txbuffer[CONFIG_UART1_TXBUFSIZE]; #endif -#ifndef CONFIG_UART2_DISABLE +#ifdef CONFIG_M16C_UART2 static char g_uart2rxbuffer[CONFIG_UART2_RXBUFSIZE]; static char g_uart2txbuffer[CONFIG_UART2_TXBUFSIZE]; #endif /* This describes the state of the M16C UART0 port. */ -#ifndef CONFIG_UART0_DISABLE +#ifdef CONFIG_M16C_UART0 static struct up_dev_s g_uart0priv = { .baud = CONFIG_UART0_BAUD, @@ -347,7 +347,7 @@ static uart_dev_t g_uart0port = /* This describes the state of the M16C UART1 port. */ -#ifndef CONFIG_UART1_DISABLE +#ifdef CONFIG_M16C_UART1 static struct up_dev_s g_uart1priv = { .baud = CONFIG_UART1_BAUD, @@ -379,7 +379,7 @@ static uart_dev_t g_uart1port = /* This describes the state of the M16C UART2 port. */ -#ifndef CONFIG_UART2_DISABLE +#ifdef CONFIG_M16C_UART2 static struct up_dev_s g_uart2priv = { .baud = CONFIG_UART2_BAUD, @@ -558,7 +558,7 @@ static int up_setup(struct uart_dev_s *dev) /* Set interrupt cause=TX complete and continuous receive mode */ -#ifndef CONFIG_UART0_DISABLE +#ifdef CONFIG_M16C_UART0 if (priv->uartno == 0) { regval = getreg8(M16C_UCON); @@ -567,7 +567,7 @@ static int up_setup(struct uart_dev_s *dev) } else #endif -#ifndef CONFIG_UART1_DISABLE +#ifdef CONFIG_M16C_UART1 if (priv->uartno == 1) { regval = getreg8(M16C_UCON); @@ -576,7 +576,7 @@ static int up_setup(struct uart_dev_s *dev) } else #endif -#ifndef CONFIG_UART2_DISABLE +#ifdef CONFIG_M16C_UART2 if (priv->uartno == 2) { regval = getreg8(M16C_U2C1); @@ -632,7 +632,7 @@ static int up_setup(struct uart_dev_s *dev) /* Set port direction registers for Rx/TX pins */ -#ifndef CONFIG_UART0_DISABLE +#ifdef CONFIG_M16C_UART0 if (priv->uartno == 0) { regval = getreg8(M16C_PD6); @@ -642,7 +642,7 @@ static int up_setup(struct uart_dev_s *dev) } else #endif -#ifndef CONFIG_UART1_DISABLE +#ifdef CONFIG_M16C_UART1 if (priv->uartno == 1) { regval = getreg8(M16C_PD6); @@ -652,7 +652,7 @@ static int up_setup(struct uart_dev_s *dev) } else #endif -#ifndef CONFIG_UART2_DISABLE +#ifdef CONFIG_M16C_UART2 if (priv->uartno == 2) { regval = getreg8(M16C_PD7); @@ -766,21 +766,21 @@ static int up_rcvinterrupt(int irq, void *context) { struct uart_dev_s *dev = NULL; -#ifndef CONFIG_UART0_DISABLE +#ifdef CONFIG_M16C_UART0 if (irq == g_uart0priv.rcvirq) { dev = &g_uart0port; } else #endif -#ifndef CONFIG_UART1_DISABLE +#ifdef CONFIG_M16C_UART1 if (irq == g_uart1priv.rcvirq) { dev = &g_uart1port; } else #endif -#ifndef CONFIG_UART2_DISABLE +#ifdef CONFIG_M16C_UART2 if (irq = g_uart2priv.rcvirq) { dev = &g_uart2port; @@ -845,7 +845,7 @@ static void m16c_rxint(struct up_dev_s *dev, bool enable) /* Pick the SxTIC register and enable interrupt priority */ -#ifndef CONFIG_UART0_DISABLE +#ifdef CONFIG_M16C_UART0 if (dev->uartno == 0) { regaddr = M16C_S0RIC; @@ -853,7 +853,7 @@ static void m16c_rxint(struct up_dev_s *dev, bool enable) } else #endif -#ifndef CONFIG_UART1_DISABLE +#ifdef CONFIG_M16C_UART1 if (dev->uartno == 1) { regaddr = M16C_S1RIC; @@ -861,7 +861,7 @@ static void m16c_rxint(struct up_dev_s *dev, bool enable) } else #endif -#ifndef CONFIG_UART2_DISABLE +#ifdef CONFIG_M16C_UART2 if (dev->uartno == 2) { regaddr = M16C_S2RIC; @@ -932,21 +932,21 @@ static int up_xmtinterrupt(int irq, void *context) { struct uart_dev_s *dev = NULL; -#ifndef CONFIG_UART0_DISABLE +#ifdef CONFIG_M16C_UART0 if (irq == g_uart0priv.xmtirq) { dev = &g_uart0port; } else #endif -#ifndef CONFIG_UART1_DISABLE +#ifdef CONFIG_M16C_UART1 if (irq == g_uart1priv.xmtirq) { dev = &g_uart1port; } else #endif -#ifndef CONFIG_UART2_DISABLE +#ifdef CONFIG_M16C_UART2 if (irq == g_uart2priv.xmtirq) { dev = &g_uart1port; @@ -1000,7 +1000,7 @@ static void m16c_txint(struct up_dev_s *dev, bool enable) /* Pick the SxTIC register and enable interrupt priority */ -#ifndef CONFIG_UART0_DISABLE +#ifdef CONFIG_M16C_UART0 if (dev->uartno == 0) { regaddr = M16C_S0TIC; @@ -1008,7 +1008,7 @@ static void m16c_txint(struct up_dev_s *dev, bool enable) } else #endif -#ifndef CONFIG_UART1_DISABLE +#ifdef CONFIG_M16C_UART1 if (dev->uartno == 1) { regaddr = M16C_S1TIC; @@ -1016,7 +1016,7 @@ static void m16c_txint(struct up_dev_s *dev, bool enable) } else #endif -#ifndef CONFIG_UART2_DISABLE +#ifdef CONFIG_M16C_UART2 if (dev->uartno == 2) { regaddr = M16C_S2TIC; @@ -1202,5 +1202,5 @@ int up_putc(int ch) #endif /* USE_SERIALDRIVER */ #elif defined(CONFIG_UART0_SERIAL_CONSOLE) || defined(CONFIG_UART1_SERIAL_CONSOLE)|| defined(CONFIG_UART2_SERIAL_CONSOLE) # error "A serial console selected, but corresponding UART not enabled" -#endif /* !CONFIG_UART0_DISABLE && !CONFIG_UART1_DISABLE && !CONFIG_UART2_DISABLE */ +#endif /* CONFIG_M16C_UART0 || CONFIG_M16C_UART1 || CONFIG_M16C_UART2 */ |