diff options
Diffstat (limited to 'nuttx/arch')
-rw-r--r-- | nuttx/arch/avr/include/at90usb/irq.h | 2 | ||||
-rw-r--r-- | nuttx/arch/avr/include/avr/irq.h | 44 | ||||
-rw-r--r-- | nuttx/arch/avr/include/avr/types.h | 14 | ||||
-rw-r--r-- | nuttx/arch/avr/src/at90usb/Make.defs | 12 | ||||
-rwxr-xr-x | nuttx/arch/avr/src/at90usb/at90usb_exceptions.S | 125 | ||||
-rwxr-xr-x | nuttx/arch/avr/src/at90usb/at90usb_head.S | 4 | ||||
-rw-r--r-- | nuttx/arch/avr/src/atmega/Make.defs | 12 | ||||
-rwxr-xr-x | nuttx/arch/avr/src/atmega/atmega_exceptions.S | 118 | ||||
-rwxr-xr-x | nuttx/arch/avr/src/atmega/atmega_head.S | 2 | ||||
-rwxr-xr-x | nuttx/arch/avr/src/avr/excptmacros.h | 524 | ||||
-rw-r--r-- | nuttx/arch/avr/src/avr/up_copystate.c | 86 | ||||
-rwxr-xr-x | nuttx/arch/avr/src/avr/up_switchcontext.S | 134 | ||||
-rw-r--r-- | nuttx/arch/avr/src/avr32/up_copystate.c | 1 | ||||
-rwxr-xr-x | nuttx/arch/avr/src/avr32/up_exceptions.S | 2 |
14 files changed, 1050 insertions, 30 deletions
diff --git a/nuttx/arch/avr/include/at90usb/irq.h b/nuttx/arch/avr/include/at90usb/irq.h index c2f9db4e6..8e6412125 100644 --- a/nuttx/arch/avr/include/at90usb/irq.h +++ b/nuttx/arch/avr/include/at90usb/irq.h @@ -63,7 +63,7 @@ #define AT90USB_IRQ_INT5 5 /* 0x000c External Interrupt Request 5 */ #define AT90USB_IRQ_INT6 6 /* 0x000e External Interrupt Request 6 */ #define AT90USB_IRQ_INT7 7 /* 0x0010 External Interrupt Request 7 */ -#define AT90USB_IRQ_PCINT0 8 /* 0x0012 PCINT0 Pin Change Interrupt Request 0 */ +#define AT90USB_IRQ_PCINT0 8 /* 0x0012 Pin Change Interrupt Request 0 */ #define AT90USB_IRQ_USBGEN 9 /* 0x0014 USB General USB General Interrupt request */ #define AT90USB_IRQ_USBEP 10 /* 0x0016 USB Endpoint/Pipe USB ENdpoint/Pipe Interrupt request */ #define AT90USB_IRQ_WDT 11 /* 0x0018 Watchdog Time-out Interrupt */ diff --git a/nuttx/arch/avr/include/avr/irq.h b/nuttx/arch/avr/include/avr/irq.h index 07b875a0a..b387be671 100644 --- a/nuttx/arch/avr/include/avr/irq.h +++ b/nuttx/arch/avr/include/avr/irq.h @@ -52,12 +52,46 @@ ****************************************************************************/ /* Register state save array indices */ - -#define REG_Rx 0 /* Just a placeholder */ -/* Size of the register state save array (in bytes?) */ - -#define XCPTCONTEXT_REGS 1 +#define REG_SPH 0 /* Stack pointer on exception entry */ +#define REG_SPL 1 +#define REG_R27 2 /* r26-r27 */ +#define REG_R26 3 +#define REG_R31 4 /* r18-r31 */ +#define REG_R30 5 +#define REG_R29 6 +#define REG_R28 7 +#define REG_R25 8 /* r25 */ +#define REG_R23 9 /* r2-r23 */ +#define REG_R22 10 +#define REG_R21 11 +#define REG_R20 12 +#define REG_R19 13 +#define REG_R18 14 +#define REG_R17 15 +#define REG_R16 16 +#define REG_R15 17 +#define REG_R14 18 +#define REG_R13 19 +#define REG_R12 20 +#define REG_R11 21 +#define REG_R10 22 +#define REG_R9 23 +#define REG_R8 24 +#define REG_R7 25 +#define REG_R6 26 +#define REG_R5 27 +#define REG_R4 28 +#define REG_R3 29 +#define REG_R2 30 +#define REG_R1 31 /* r1 - the "zero" register */ +#define REG_SREG 32 /* Status register */ +#define REG_R0 33 /* r0 */ +#define REG_R24 34 /* r24 */ + +/* Size of the register state save array (in bytes) */ + +#define XCPTCONTEXT_REGS 35 /**************************************************************************** * Public Types diff --git a/nuttx/arch/avr/include/avr/types.h b/nuttx/arch/avr/include/avr/types.h index 2e30414c4..0ff769576 100644 --- a/nuttx/arch/avr/include/avr/types.h +++ b/nuttx/arch/avr/include/avr/types.h @@ -63,20 +63,20 @@ * files */ -typedef signed char _int8_t; +typedef signed char _int8_t; /* char is 8-bits */ typedef unsigned char _uint8_t; -typedef signed short _int16_t; -typedef unsigned short _uint16_t; +typedef signed int _int16_t; /* int is 16-bits */ +typedef unsigned int _uint16_t; -typedef signed int _int32_t; -typedef unsigned int _uint32_t; +typedef signed long _int32_t; /* long is 32-bits */ +typedef unsigned long _uint32_t; -typedef signed long long _int64_t; +typedef signed long long _int64_t; /* long long is 64-bits */ typedef unsigned long long _uint64_t; #define __INT64_DEFINED -/* A pointer is 4 bytes */ +/* A pointer is 2 bytes */ typedef signed int _intptr_t; typedef unsigned int _uintptr_t; diff --git a/nuttx/arch/avr/src/at90usb/Make.defs b/nuttx/arch/avr/src/at90usb/Make.defs index bc91ceb66..a206f4f6f 100644 --- a/nuttx/arch/avr/src/at90usb/Make.defs +++ b/nuttx/arch/avr/src/at90usb/Make.defs @@ -39,15 +39,15 @@ HEAD_ASRC = at90usb_head.S # Common AVR files -CMN_ASRCS = -CMN_CSRCS = up_allocateheap.c up_createstack.c up_exit.c up_idle.c \ - up_initialize.c up_interruptcontext.c up_lowputs.c up_mdelay.c \ - up_modifyreg8.c up_modifyreg16.c up_modifyreg32.c up_puts.c \ - up_releasestack.c up_udelay.c up_usestack.c +CMN_ASRCS = up_switchcontext.S +CMN_CSRCS = up_allocateheap.c up_copystate.c up_createstack.c up_exit.c \ + up_idle.c up_initialize.c up_interruptcontext.c up_lowputs.c \ + up_mdelay.c up_modifyreg8.c up_modifyreg16.c up_modifyreg32.c \ + up_puts.c up_releasestack.c up_udelay.c up_usestack.c # Required aT90USB files -CHIP_ASRCS = +CHIP_ASRCS = at90usb_exceptions.S CHIP_CSRCS = # Configuration-dependent aT90USB files diff --git a/nuttx/arch/avr/src/at90usb/at90usb_exceptions.S b/nuttx/arch/avr/src/at90usb/at90usb_exceptions.S new file mode 100755 index 000000000..748fd5efc --- /dev/null +++ b/nuttx/arch/avr/src/at90usb/at90usb_exceptions.S @@ -0,0 +1,125 @@ +/********************************************************************************************
+ * arch/avr/src/at90usb/at90usb_exceptions.S
+ *
+ * Copyright (C) 2011 Gregory Nutt. All rights reserved.
+ * Author: Gregory Nutt <spudmonkey@racsa.co.cr>
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions
+ * are met:
+ *
+ * 1. Redistributions of source code must retain the above copyright
+ * notice, this list of conditions and the following disclaimer.
+ * 2. Redistributions in binary form must reproduce the above copyright
+ * notice, this list of conditions and the following disclaimer in
+ * the documentation and/or other materials provided with the
+ * distribution.
+ * 3. Neither the name NuttX nor the names of its contributors may be
+ * used to endorse or promote products derived from this software
+ * without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
+ * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
+ * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
+ * FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE
+ * COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
+ * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING,
+ * BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS
+ * OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED
+ * AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
+ * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
+ * ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
+ * POSSIBILITY OF SUCH DAMAGE.
+ *
+ ********************************************************************************************/
+
+/********************************************************************************************
+ * Included Files
+ ********************************************************************************************/
+
+#include <nuttx/config.h>
+
+#include <arch/irq.h>
+
+#include "excptmacros.h"
+
+/********************************************************************************************
+ * Pre-processor Definitions
+ ********************************************************************************************/
+
+/********************************************************************************************
+ * External Symbols
+ ********************************************************************************************/
+
+ .file "at90usb_exceptions.S"
+ .global up_doirq
+
+/********************************************************************************************
+ * Macros
+ ********************************************************************************************/
+
+/********************************************************************************************
+ * Exception Vector Handlers
+ ********************************************************************************************/
+
+ .section .handlers, "ax", @progbits
+
+ HANDLER at90usb_int0, ATMEGA_IRQ_INT0, excpt_common /* External interrupt request 0 */
+ HANDLER at90usb_int1, ATMEGA_IRQ_INT1, excpt_common /* External interrupt request 1 */
+ HANDLER at90usb_int2, ATMEGA_IRQ_INT2, excpt_common /* External interrupt request 2 */
+ HANDLER at90usb_int3, ATMEGA_IRQ_INT3, excpt_common /* External interrupt request 3 */
+ HANDLER at90usb_int4, ATMEGA_IRQ_INT4, excpt_common /* External interrupt request 4 */
+ HANDLER at90usb_int5, ATMEGA_IRQ_INT5, excpt_common /* External interrupt request 5 */
+ HANDLER at90usb_int6, ATMEGA_IRQ_INT6, excpt_common /* External interrupt request 6 */
+ HANDLER at90usb_int7, ATMEGA_IRQ_INT7, excpt_common /* External interrupt request 7 */
+ HANDLER at90usb_pcint0, AT90USB_IRQ_PCINT0, excpt_common /* Pin Change Interrupt Request 0 */
+ HANDLER at90usb_usbgen, AT90USB_IRQ_USBGEN, excpt_common /* USB General USB General Interrupt request */
+ HANDLER at90usb_usbep, AT90USB_IRQ_USBEP, excpt_common /* USB Endpoint/Pipe USB ENdpoint/Pipe Interrupt request */
+ HANDLER at90usb_wdt, AT90USB_IRQ_WDT, excpt_common /* Watchdog Time-out Interrupt */
+ HANDLER at90usb_t2compa, AT90USB_IRQ_T2COMPA, excpt_common /* TIMER2 COMPA Timer/Counter2 Compare Match A */
+ HANDLER at90usb_t2compb, AT90USB_IRQ_T2COMPB, excpt_common /* TIMER2 COMPA Timer/Counter2 Compare Match B */
+ HANDLER at90usb_t2ovf, ATMEGA_IRQ_T2OVF, excpt_common /* TIMER2 OVF timer/counter2 overflow */
+ HANDLER at90usb_t1capt, ATMEGA_IRQ_T1CAPT, excpt_common /* TIMER1 CAPT timer/counter1 capture event */
+ HANDLER at90usb_t1compa, ATMEGA_IRQ_T1COMPA, excpt_common /* TIMER1 COMPA timer/counter1 compare match A */
+ HANDLER at90usb_t1compb, ATMEGA_IRQ_T1COMPB, excpt_common /* TIMER1 COMPB timer/counter1 compare match B */
+ HANDLER at90usb_t1compc, ATMEGA_IRQ_T1COMPC, excpt_common /* TIMER1 COMPC timer/counter1 compare match C */
+ HANDLER at90usb_t1ovf, ATMEGA_IRQ_T1OVF, excpt_common /* TIMER1 OVF timer/counter1 overflow */
+ HANDLER at90usb_t0compa, AT90USB_IRQ_T0COMPA, excpt_common /* TIMER0 COMPA Timer/Counter0 Compare Match A */
+ HANDLER at90usb_t0compb, AT90USB_IRQ_T0COMPB, excpt_common /* TIMER0 COMPB Timer/Counter0 Compare Match B */
+ HANDLER at90usb_t0ovf, ATMEGA_IRQ_T0OVF, excpt_common /* TIMER0 OVF timer/counter0 overflow */
+ HANDLER at90usb_spi, ATMEGA_IRQ_SPI, excpt_common /* STC SPI serial transfer complete */
+ HANDLER at90usb_u1rx, ATMEGA_IRQ_U1RX, excpt_common /* USART1 RX complete */
+ HANDLER at90usb_u1dre, ATMEGA_IRQ_U1DRE, excpt_common /* USART1 data register empty */
+ HANDLER at90usb_u1tx, ATMEGA_IRQ_U1TX, excpt_common /* USART1 TX complete */
+ HANDLER at90usb_anacomp, ATMEGA_IRQ_ANACOMP, excpt_common /* ANALOG COMP analog comparator */
+ HANDLER at90usb_adc, ATMEGA_IRQ_ADC, excpt_common /* ADC conversion complete */
+ HANDLER at90usb_ee, ATMEGA_IRQ_EE, excpt_common /* EEPROM ready */
+ HANDLER at90usb_t3capt, ATMEGA_IRQ_T3CAPT, excpt_common /* TIMER3 CAPT timer/counter3 capture event */
+ HANDLER at90usb_t3compa, ATMEGA_IRQ_T3COMPA, excpt_common /* TIMER3 COMPA timer/counter3 compare match a */
+ HANDLER at90usb_t3compb, ATMEGA_IRQ_T3COMPB, excpt_common /* TIMER3 COMPB timer/counter3 compare match b */
+ HANDLER at90usb_t3compc, ATMEGA_IRQ_T3COMPC, excpt_common /* TIMER3 COMPC timer/counter3 compare match c */
+ HANDLER at90usb_t3ovf, ATMEGA_IRQ_T3OVF, excpt_common /* TIMER3 OVF timer/counter3 overflow */
+ HANDLER at90usb_twi, ATMEGA_IRQ_TWI, excpt_common /* TWI two-wire serial interface */
+ HANDLER at90usb_spmrdy, ATMEGA_IRQ_SPMRDY, excpt_common /* Store program memory ready */
+
+/* Common exception handling logic. */
+
+excpt_common:
+#warning "Missing Logic"
+
+/****************************************************************************************************
+ * Name: up_interruptstack
+ ****************************************************************************************************/
+
+#if CONFIG_ARCH_INTERRUPTSTACK > 0
+ .bss
+ .align 4
+ .globl up_interruptstack
+ .type up_interruptstack, object
+up_interruptstack:
+ .skip CONFIG_ARCH_INTERRUPTSTACK
+.Lintstackbase:
+ .size up_interruptstack, .-up_interruptstack
+#endif
+ .end
+
diff --git a/nuttx/arch/avr/src/at90usb/at90usb_head.S b/nuttx/arch/avr/src/at90usb/at90usb_head.S index 7a1d71e9f..16d4abcc1 100755 --- a/nuttx/arch/avr/src/at90usb/at90usb_head.S +++ b/nuttx/arch/avr/src/at90usb/at90usb_head.S @@ -38,7 +38,7 @@ ****************************************************************************/
#include <nuttx/config.h>
-#define __AVR_ATmega128__
+
#include <avr/io.h>
#include <avr/sfr_defs.h>
@@ -83,7 +83,7 @@ .global at90usb_int5 /* External interrupt request 5 */
.global at90usb_int6 /* External interrupt request 6 */
.global at90usb_int7 /* External interrupt request 7 */
- .global at90usb_pcint0 /* PCINT0 Pin Change Interrupt Request 0 */
+ .global at90usb_pcint0 /* Pin Change Interrupt Request 0 */
.global at90usb_usbgen /* USB General USB General Interrupt request */
.global at90usb_usbep /* USB Endpoint/Pipe USB ENdpoint/Pipe Interrupt request */
.global at90usb_wdt /* Watchdog Time-out Interrupt */
diff --git a/nuttx/arch/avr/src/atmega/Make.defs b/nuttx/arch/avr/src/atmega/Make.defs index fd01dfdb5..3699543dd 100644 --- a/nuttx/arch/avr/src/atmega/Make.defs +++ b/nuttx/arch/avr/src/atmega/Make.defs @@ -39,15 +39,15 @@ HEAD_ASRC = atmega_head.S # Common AVR files -CMN_ASRCS = -CMN_CSRCS = up_allocateheap.c up_createstack.c up_exit.c up_idle.c \ - up_initialize.c up_interruptcontext.c up_lowputs.c up_mdelay.c \ - up_modifyreg8.c up_modifyreg16.c up_modifyreg32.c up_puts.c \ - up_releasestack.c up_udelay.c up_usestack.c +CMN_ASRCS = up_switchcontext.S +CMN_CSRCS = up_allocateheap.c up_copystate.c up_createstack.c up_exit.c \ + up_idle.c up_initialize.c up_interruptcontext.c up_lowputs.c \ + up_mdelay.c up_modifyreg8.c up_modifyreg16.c up_modifyreg32.c \ + up_puts.c up_releasestack.c up_udelay.c up_usestack.c # Required ATMEGA files -CHIP_ASRCS = +CHIP_ASRCS = atmega_exceptions.S CHIP_CSRCS = # Configuration-dependent ATMEGA files diff --git a/nuttx/arch/avr/src/atmega/atmega_exceptions.S b/nuttx/arch/avr/src/atmega/atmega_exceptions.S new file mode 100755 index 000000000..522eddbed --- /dev/null +++ b/nuttx/arch/avr/src/atmega/atmega_exceptions.S @@ -0,0 +1,118 @@ +/********************************************************************************************
+ * arch/avr/src/atmega/atmega_exceptions.S
+ *
+ * Copyright (C) 2011 Gregory Nutt. All rights reserved.
+ * Author: Gregory Nutt <spudmonkey@racsa.co.cr>
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions
+ * are met:
+ *
+ * 1. Redistributions of source code must retain the above copyright
+ * notice, this list of conditions and the following disclaimer.
+ * 2. Redistributions in binary form must reproduce the above copyright
+ * notice, this list of conditions and the following disclaimer in
+ * the documentation and/or other materials provided with the
+ * distribution.
+ * 3. Neither the name NuttX nor the names of its contributors may be
+ * used to endorse or promote products derived from this software
+ * without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
+ * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
+ * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
+ * FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE
+ * COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
+ * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING,
+ * BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS
+ * OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED
+ * AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
+ * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
+ * ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
+ * POSSIBILITY OF SUCH DAMAGE.
+ *
+ ********************************************************************************************/
+
+/********************************************************************************************
+ * Included Files
+ ********************************************************************************************/
+
+#include <nuttx/config.h>
+
+#include <arch/irq.h>
+
+#include "excptmacros.h"
+
+/********************************************************************************************
+ * External Symbols
+ ********************************************************************************************/
+
+ .file "atmega_exceptions.S"
+ .global up_doirq
+
+/********************************************************************************************
+ * Macros
+ ********************************************************************************************/
+
+/********************************************************************************************
+ * Exception Vector Handlers
+ ********************************************************************************************/
+
+ .section .handlers, "ax", @progbits
+
+ HANDLER atmega_int0, ATMEGA_IRQ_INT0, excpt_common /* External interrupt request 0 */
+ HANDLER atmega_int1, ATMEGA_IRQ_INT1, excpt_common /* External interrupt request 1 */
+ HANDLER atmega_int2, ATMEGA_IRQ_INT2, excpt_common /* External interrupt request 2 */
+ HANDLER atmega_int3, ATMEGA_IRQ_INT3, excpt_common /* External interrupt request 3 */
+ HANDLER atmega_int4, ATMEGA_IRQ_INT4, excpt_common /* External interrupt request 4 */
+ HANDLER atmega_int5, ATMEGA_IRQ_INT5, excpt_common /* External interrupt request 5 */
+ HANDLER atmega_int6, ATMEGA_IRQ_INT6, excpt_common /* External interrupt request 6 */
+ HANDLER atmega_int7, ATMEGA_IRQ_INT7, excpt_common /* External interrupt request 7 */
+ HANDLER atmega_t2comp, ATMEGA_IRQ_T2COMP, excpt_common /* TIMER2 COMP timer/counter2 compare match */
+ HANDLER atmega_t2ovf, ATMEGA_IRQ_T2OVF, excpt_common /* TIMER2 OVF timer/counter2 overflow */
+ HANDLER atmega_t1capt, ATMEGA_IRQ_T1CAPT, excpt_common /* TIMER1 CAPT timer/counter1 capture event */
+ HANDLER atmega_t1compa, ATMEGA_IRQ_T1COMPA, excpt_common /* TIMER1 COMPA timer/counter1 compare match a */
+ HANDLER atmega_t1compb, ATMEGA_IRQ_T1COMPB, excpt_common /* TIMER1 COMPB timer/counter1 compare match b */
+ HANDLER atmega_t1ovf, ATMEGA_IRQ_T1OVF, excpt_common /* TIMER1 OVF timer/counter1 overflow */
+ HANDLER atmega_t0comp, ATMEGA_IRQ_T0COMP, excpt_common /* TIMER0 COMP timer/counter0 compare match */
+ HANDLER atmega_t0ovf, ATMEGA_IRQ_T0OVF, excpt_common /* TIMER0 OVF timer/counter0 overflow */
+ HANDLER atmega_spi, ATMEGA_IRQ_SPI, excpt_common /* STC SPI serial transfer complete */
+ HANDLER atmega_u0rx, ATMEGA_IRQ_U0RX, excpt_common /* USART0 RX complete */
+ HANDLER atmega_u0dre, ATMEGA_IRQ_U0DRE, excpt_common /* USART0 data register empty */
+ HANDLER atmega_u0tx, ATMEGA_IRQ_U0TX, excpt_common /* USART0 TX complete */
+ HANDLER atmega_adc, ATMEGA_IRQ_ADC, excpt_common /* ADC conversion complete */
+ HANDLER atmega_ee, ATMEGA_IRQ_EE, excpt_common /* EEPROM ready */
+ HANDLER atmega_anacomp, ATMEGA_IRQ_ANACOMP, excpt_common /* ANALOG COMP analog comparator */
+ HANDLER atmega_t1compc, ATMEGA_IRQ_T1COMPC, excpt_common /* TIMER1 COMPC timer/countre1 compare match c */
+ HANDLER atmega_t3capt, ATMEGA_IRQ_T3CAPT, excpt_common /* TIMER3 CAPT timer/counter3 capture event */
+ HANDLER atmega_t3compa, ATMEGA_IRQ_T3COMPA, excpt_common /* TIMER3 COMPA timer/counter3 compare match a */
+ HANDLER atmega_t3compb, ATMEGA_IRQ_T3COMPB, excpt_common /* TIMER3 COMPB timer/counter3 compare match b */
+ HANDLER atmega_t3compc, ATMEGA_IRQ_T3COMPC, excpt_common /* TIMER3 COMPC timer/counter3 compare match c */
+ HANDLER atmega_t3ovf, ATMEGA_IRQ_T3OVF, excpt_common /* TIMER3 OVF timer/counter3 overflow */
+ HANDLER atmega_u1rx, ATMEGA_IRQ_U1RX, excpt_common /* USART1 RX complete */
+ HANDLER atmega_u1dre, ATMEGA_IRQ_U1DRE, excpt_common /* USART1 data register empty */
+ HANDLER atmega_u1tx, ATMEGA_IRQ_U1TX, excpt_common /* USART1 TX complete */
+ HANDLER atmega_twi, ATMEGA_IRQ_TWI, excpt_common /* TWI two-wire serial interface */
+ HANDLER atmega_spmrdy, ATMEGA_IRQ_SPMRDY, excpt_common /* Store program memory ready */
+
+/* Common exception handling logic. */
+
+excpt_common:
+#warning "Missing Logic"
+
+/****************************************************************************************************
+ * Name: up_interruptstack
+ ****************************************************************************************************/
+
+#if CONFIG_ARCH_INTERRUPTSTACK > 0
+ .bss
+ .align 4
+ .globl up_interruptstack
+ .type up_interruptstack, object
+up_interruptstack:
+ .skip CONFIG_ARCH_INTERRUPTSTACK
+.Lintstackbase:
+ .size up_interruptstack, .-up_interruptstack
+#endif
+ .end
+
diff --git a/nuttx/arch/avr/src/atmega/atmega_head.S b/nuttx/arch/avr/src/atmega/atmega_head.S index cd3c194dc..aff46a39e 100755 --- a/nuttx/arch/avr/src/atmega/atmega_head.S +++ b/nuttx/arch/avr/src/atmega/atmega_head.S @@ -38,7 +38,7 @@ ****************************************************************************/
#include <nuttx/config.h>
-#define __AVR_ATmega128__
+
#include <avr/io.h>
#include <avr/sfr_defs.h>
diff --git a/nuttx/arch/avr/src/avr/excptmacros.h b/nuttx/arch/avr/src/avr/excptmacros.h new file mode 100755 index 000000000..b4408f288 --- /dev/null +++ b/nuttx/arch/avr/src/avr/excptmacros.h @@ -0,0 +1,524 @@ +/********************************************************************************************
+ * arch/avr/src/avr/excptmacros.h
+ *
+ * Copyright (C) 2011 Gregory Nutt. All rights reserved.
+ * Author: Gregory Nutt <spudmonkey@racsa.co.cr>
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions
+ * are met:
+ *
+ * 1. Redistributions of source code must retain the above copyright
+ * notice, this list of conditions and the following disclaimer.
+ * 2. Redistributions in binary form must reproduce the above copyright
+ * notice, this list of conditions and the following disclaimer in
+ * the documentation and/or other materials provided with the
+ * distribution.
+ * 3. Neither the name NuttX nor the names of its contributors may be
+ * used to endorse or promote products derived from this software
+ * without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
+ * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
+ * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
+ * FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE
+ * COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
+ * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING,
+ * BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS
+ * OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED
+ * AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
+ * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
+ * ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
+ * POSSIBILITY OF SUCH DAMAGE.
+ *
+ ********************************************************************************************/
+
+#ifndef __ARCH_AVR_SRC_AVR_EXCPTMACROS_H
+#define __ARCH_AVR_SRC_AVR_EXCPTMACROS_H
+
+/********************************************************************************************
+ * Included Files
+ ********************************************************************************************/
+
+#include <nuttx/config.h>
+
+#ifdef __ASSEMBLY__
+
+#include <arch/irq.h>
+
+#include <avr/io.h>
+#include <avr/sfr_defs.h>
+
+/********************************************************************************************
+ * Pre-Processor Definitions
+ ********************************************************************************************/
+
+/********************************************************************************************
+ * Pre-processor Definitions
+ ********************************************************************************************/
+
+#ifndef __SREG__
+# define __SREG__ 0x3f
+#endif
+
+#ifndef __SP_H__
+# define __SP_H__ 0x3e
+#endif
+
+#ifndef __SP_L__
+# define __SP_L__ 0x3d
+#endif
+
+#ifndef __tmp_reg__
+# define __tmp_reg__ r0
+#endif
+
+#ifndef __zero_reg__
+# define __zero_reg__ r1
+#endif
+
+/********************************************************************************************
+ * Global Symbols
+ ********************************************************************************************/
+
+#if CONFIG_ARCH_INTERRUPTSTACK > 3
+ .global g_intstackbase
+ .global g_nestlevel
+#endif
+
+/********************************************************************************************
+ * Assembly Language Macros
+ ********************************************************************************************/
+
+/********************************************************************************************
+ * General Exception Handling Example:
+ *
+ * HANDLER IRQ_X, my_exception
+ * ...
+ * my_exception:
+ * EXCPT_PROLOGUE - Save registers on stack, enable nested interrupts
+ * in r22, __SP_L__ - Pass register save structure as the parameter 2
+ * in r23, __SP_H__ - (Careful, push post-decrements)
+ * USE_INTSTACK rx, ry, rz - Switch to the interrupt stack
+ * call handler - Handle the exception IN=old regs OUT=new regs
+ * RESTORE_STACK rx, ry - Undo the operations of USE_STACK
+ *
+ * EXCPT_EPILOGUE - Return to the context returned by handler()
+ *
+ ********************************************************************************************/
+/****************************************************************************
+ * Macros
+ ****************************************************************************/
+
+/********************************************************************************************
+ * Name: HANDLER
+ *
+ * Description:
+ * This macro provides the exception entry logic. It simply saves one register on the
+ * stack (r24) and passes the IRQ number to to common logic (see EXCPT_PROLOGUE).
+ *
+ * On Entry:
+ * sp - Points to the top of the stack
+ * Only the stack is available for storage
+ *
+ * At completion:
+ * Stack pointer is incremented by one, the saved r24 is on the stack, r24 now contains the
+ * IRQ number
+ *
+ ********************************************************************************************/
+
+ .macro HANDLER, label, irqno, common
+\label:
+ push r24
+ ldi r24, \irqno
+ rjmp \common
+ .endm
+
+/********************************************************************************************
+ * Name: EXCPT_PROLOGUE
+ *
+ * Description:
+ * Provides the common "prologue" logic that should appear at the beginning of the exception
+ * handler.
+ *
+ * On Entry:
+ * r0 - has already been pushed onto the stack and now holds the IRQ number
+ * sp - Points to the top of the stack
+ * Only the stack is available for storage
+ *
+ * At completion:
+ * Register state is saved on the stack; All registers are available for usage except sp.
+ *
+ ********************************************************************************************/
+
+ .macro EXCPT_PROLOGUE
+ /* Save R1 - The zero register (but might not be zero) */
+
+ push r1
+
+ /* Save the status register on the stack */
+
+ in r1, __SREG__ /* Save the status register */
+ cli /* Disable interrupts */
+ push r1
+
+ /* R1 must be zero for our purposes */
+
+ clr r1
+
+ /* Save r2-r17 - Call-saved, "static" registers */
+
+ push r2
+ push r3
+ push r4
+ push r5
+ push r6
+ push r7
+ push r8
+ push r9
+ push r10
+ push r11
+ push r12
+ push r13
+ push r14
+ push r15
+ push r16
+ push r17
+
+ /* Save r18-r27 - Call-used, "volatile" registers (r24 was saved by
+ * HANDLER, r26-r27 saved later, out of sequence)
+ */
+
+ push r18
+ push r19
+ push r20
+ push r21
+ push r22
+ push r23
+ push r25
+
+ /* Save r28-r29 - Call-saved, "static" registers */
+
+ push r28
+ push r29
+
+ /* Save r30-r31 - Call-used, "volatile" registers */
+
+ push r30
+ push r31
+
+ /* Now save r26-r27 */
+
+ push r26
+ push r27
+
+ /* Finally, save the stack pointer. BUT we want the value of the stack pointer as
+ * it was on entry into this macro. We'll have to subtract to get that value.
+ */
+
+ in r24, __SP_L__
+ in r25, __SP_H__
+ adiw r24, XCPTCONTEXT_REGS
+
+ push r24
+ push r25
+ .endm
+
+/********************************************************************************************
+ * Name: EXCPT_EPILOGUE
+ *
+ * Description:
+ * Provides the "epilogue" logic that should appear at the end of every exception handler.
+ *
+ * On input:
+ * sp points to the address of the register save area (just as left by EXCPT_PROLOGUE).
+ * All registers are available for use.
+ * Interrupts are disabled.
+ *
+ * On completion:
+ * All registers restored
+ *
+ ********************************************************************************************/
+
+ .macro EXCPT_EPILOGUE, regs
+
+ /* We don't need to restore the stack pointer */
+
+ pop r27
+ pop r26
+
+ /* Restore r26-r27 */
+
+ pop r27
+ pop r26
+
+ /* Restore r30-r31 - Call-used, "volatile" registers */
+
+ pop r31
+ pop r30
+
+ /* Restore r28-r29 - Call-saved, "static" registers */
+
+ pop r29
+ pop r28
+
+ /* Restore r18-r27 - Call-used, "volatile" registers (r26-r27 already
+ * restored, r24 will be restored later)
+ */
+
+ pop r25
+ pop r23
+ pop r22
+ pop r21
+ pop r20
+ pop r19
+ pop r18
+
+ /* Restore r2-r17 - Call-saved, "static" registers */
+
+ pop r17
+ pop r16
+ pop r15
+ pop r14
+ pop r13
+ pop r12
+ pop r11
+ pop r10
+ pop r9
+ pop r8
+ pop r7
+ pop r6
+ pop r5
+ pop r4
+ pop r3
+ pop r2
+
+ /* Restore r1 - the "zero" register (that may not be zero) */
+
+ pop r1
+
+ /* Restore the status register (probably enabling interrupts) */
+
+ pop r0 /* Restore the status register */
+ out __SREG__, r0
+
+ /* Finally, restore r0 and r24 - the scratch and IRQ number registers */
+
+ pop r0
+ pop r24
+ .endm
+
+/********************************************************************************************
+ * Name: USER_SAVE
+ *
+ * Description:
+ * Similar to EXPCT_PROLOGUE except that (1) this saves values into a register save
+ * data structure instead of on the stack, (2) the pointer is in r26;r27, and (3)
+ * Call-used registers are not saved.
+ *
+ * On Entry:
+ * X [r26:r27] - Points to the register save structure.
+ * Interrupts are disabled.
+ *
+ * At completion:
+ * Register state is saved on the stack; All registers are available for usage except sp.
+ *
+ ********************************************************************************************/
+
+ .macro USER_SAVE
+
+ /* Save the current stack pointer. */
+
+ in r24, __SP_L__
+ st x+, r24
+ in r25, __SP_H__
+ st x+, r24
+
+ /* Skip over r26-r27 and r30-r31 - Call-used, "volatile" registers */
+
+ adiw r26, 4 /* Four registers: r26-r27 and r30-r31*/
+
+ /* Save r28-r29 - Call-saved, "static" registers */
+
+ st x+, r29
+ st x+, r28
+
+ /* Skip over r18-r27 - Call-used, "volatile" registers (r26-r27 have been skipped) */
+
+ adiw r26, 8 /* Eight registers: r18-r25 */
+
+ /* Save r2-r17 - Call-saved, "static" registers */
+
+ st x+, r17
+ st x+, r16
+ st x+, r15
+ st x+, r14
+ st x+, r13
+ st x+, r12
+ st x+, r11
+ st x+, r10
+ st x+, r9
+ st x+, r8
+ st x+, r7
+ st x+, r6
+ st x+, r5
+ st x+, r4
+ st x+, r3
+ st x+, r2
+
+ /* Set r1 to zero - Function calls must return with r1=0 */
+
+ clr r1
+ st x+, r1
+
+ /* Save the status register (probably not necessary since interrupts are disabled) */
+
+ in r0, __SREG__
+ st x+, r0
+
+ /* Skip R0 and r24 - These are scratch register and Call-used, "volatile" registers */
+ .endm
+
+/********************************************************************************************
+ * Name: TCB_RESTORE
+ *
+ * Description:
+ * Functionally equivalent to EXCPT_EPILOGUE excetp that register save area is not on the
+ * stack but is held in a data structure.
+ *
+ * On input:
+ * X [r26:r27] points to the data structure.
+ * All registers are available for use.
+ * Interrupts are disabled.
+ *
+ * On completion:
+ * All registers restored
+ *
+ ********************************************************************************************/
+
+ .macro TCB_RESTORE, regs
+
+ /* Fetch the new stack pointer and the saved values of X [r26:r27]. Save X on the new
+ * stack where we can recover it later.
+ */
+
+ ld r24, x+ /* Fetch stack pointer (post-incrementing) */
+ out __SP_L__, r24
+ ld r25, x+
+ out __SP_H__, r25
+ ld r25, x+ /* Fetch r26-r27 and save to the new stack */
+ ld r24, x+
+ push r24
+ push r25
+
+ /* Restore r30-r31 - Call-used, "volatile" registers */
+
+ ld r31, x+
+ ld r30, x+
+
+ /* Restore r28-r29 - Call-saved, "static" registers */
+
+ ld r29, x+
+ ld r28, x+
+
+ /* Restore r18-r27 - Call-used, "volatile" registers (r26-r27 have been
+ * moved and r24 will be restore later)
+ */
+
+ ld r25, x+
+ ld r23, x+
+ ld r22, x+
+ ld r21, x+
+ ld r20, x+
+ ld r19, x+
+ ld r18, x+
+
+ /* Restore r2-r17 - Call-saved, "static" registers */
+
+ ld r17, x+
+ ld r16, x+
+ ld r15, x+
+ ld r14, x+
+ ld r13, x+
+ ld r12, x+
+ ld r11, x+
+ ld r10, x+
+ ld r9, x+
+ ld r8, x+
+ ld r7, x+
+ ld r6, x+
+ ld r5, x+
+ ld r4, x+
+ ld r3, x+
+ ld r2, x+
+
+ /* Restore r1 - The "scratch" register */
+
+ ld r1, x+
+
+ /* Restore the status register (probably enabling interrupts) */
+
+ ld r0, x+
+ out __SREG__, r0
+
+ /* Restore r0 and r241 - The scratch and IRQ number registers */
+
+ ld r0, x+
+ ld r24, x+
+
+ /* Finally, recover X [r26-r27] from the the new stack */
+
+ pop r27
+ pop r26
+ .endm
+
+/********************************************************************************************
+ * Name: USE_INTSTACK
+ *
+ * Description:
+ * Switch to the interrupt stack (if enabled in the configuration) and if the nesting level
+ * is equal to 0. Increment the nesting level in any event.
+ *
+ * On Entry:
+ * sp - Current value of the user stack pointer
+ * tmp1, tmp2, and tmp3 are registers that can be used temporarily.
+ * All interrupts should still be disabled.
+ *
+ * At completion:
+ * If the nesting level is 0, then (1) the user stack pointer is saved at the base of the
+ * interrupt stack and sp points to the interrupt stack.
+ * The values of tmp1, tmp2, tmp3, and sp have been altered
+ *
+ ********************************************************************************************/
+
+ .macro USE_INTSTACK, tmp1, tmp2, tmp3
+#if CONFIG_ARCH_INTERRUPTSTACK > 0
+# warning "Not implemented"
+#endif
+ .endm
+
+/********************************************************************************************
+ * Name: RESTORE_STACK
+ *
+ * Description:
+ * Restore the user stack. Not really.. actually only decrements the nesting level. We
+ * always get the new stack pointer for the register save array.
+ *
+ * On Entry:
+ * tmp1 and tmp2 are registers that can be used temporarily.
+ * All interrupts must be disabled.
+ *
+ * At completion:
+ * Current nesting level is decremented
+ * The values of tmp1 and tmp2 have been altered
+ *
+ ********************************************************************************************/
+
+ .macro RESTORE_STACK, tmp1, tmp2
+#if CONFIG_ARCH_INTERRUPTSTACK > 0
+# warning "Not implemented"
+#endif
+ .endm
+
+#endif /* __ASSEMBLY__ */
+#endif /* __ARCH_AVR_SRC_AVR_EXCPTMACROS_H */
diff --git a/nuttx/arch/avr/src/avr/up_copystate.c b/nuttx/arch/avr/src/avr/up_copystate.c new file mode 100644 index 000000000..5423202f2 --- /dev/null +++ b/nuttx/arch/avr/src/avr/up_copystate.c @@ -0,0 +1,86 @@ +/**************************************************************************** + * arch/avr/src/avr/up_copystate.c + * + * Copyright (C) 2011 Gregory Nutt. All rights reserved. + * Author: Gregory Nutt <spudmonkey@racsa.co.cr> + * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions + * are met: + * + * 1. Redistributions of source code must retain the above copyright + * notice, this list of conditions and the following disclaimer. + * 2. Redistributions in binary form must reproduce the above copyright + * notice, this list of conditions and the following disclaimer in + * the documentation and/or other materials provided with the + * distribution. + * 3. Neither the name NuttX nor the names of its contributors may be + * used to endorse or promote products derived from this software + * without specific prior written permission. + * + * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS + * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT + * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS + * FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE + * COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, + * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, + * BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS + * OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED + * AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT + * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN + * ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE + * POSSIBILITY OF SUCH DAMAGE. + * + ****************************************************************************/ + +/**************************************************************************** + * Included Files + ****************************************************************************/ + +#include <nuttx/config.h> + +#include <stdint.h> +#include <arch/irq.h> + +#include "up_internal.h" + +/**************************************************************************** + * Pre-processor Definitions + ****************************************************************************/ + +/**************************************************************************** + * Private Data + ****************************************************************************/ + +/**************************************************************************** + * Private Functions + ****************************************************************************/ + +/**************************************************************************** + * Public Functions + ****************************************************************************/ + +/**************************************************************************** + * Name: up_copystate + ****************************************************************************/ + +/* Really just a memcpy */ + +void up_copystate(uint8_t *dest, uint8_t *src) +{ + int i; + + /* The state is copied from the stack to the TCB, but only a reference is + * passed to get the state from the TCB. So the following check avoids + * copying the TCB save area onto itself: + */ + + if (src != dest) + { + for (i = 0; i < XCPTCONTEXT_REGS; i++) + { + *dest++ = *src++; + } + } +} + diff --git a/nuttx/arch/avr/src/avr/up_switchcontext.S b/nuttx/arch/avr/src/avr/up_switchcontext.S new file mode 100755 index 000000000..b31173456 --- /dev/null +++ b/nuttx/arch/avr/src/avr/up_switchcontext.S @@ -0,0 +1,134 @@ +/************************************************************************************ + * arch/avr/src/avr/up_switchcontext.S + * + * Copyright (C) 2011 Gregory Nutt. All rights reserved. + * Author: Gregory Nutt <spudmonkey@racsa.co.cr> + * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions + * are met: + * + * 1. Redistributions of source code must retain the above copyright + * notice, this list of conditions and the following disclaimer. + * 2. Redistributions in binary form must reproduce the above copyright + * notice, this list of conditions and the following disclaimer in + * the documentation and/or other materials provided with the + * distribution. + * 3. Neither the name NuttX nor the names of its contributors may be + * used to endorse or promote products derived from this software + * without specific prior written permission. + * + * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS + * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT + * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS + * FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE + * COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, + * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, + * BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS + * OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED + * AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT + * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN + * ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE + * POSSIBILITY OF SUCH DAMAGE. + * + ************************************************************************************/ + +/************************************************************************************ + * Included Files + ************************************************************************************/ + +#include <nuttx/config.h> + +#include "excptmacros.h" + +/************************************************************************************ + * Pre-processor Definitions + ************************************************************************************/ + +/************************************************************************************ + * Global Symbols + ************************************************************************************/ + + .file "up_switchcontext.S" + +/************************************************************************************ + * Macros + ************************************************************************************/ + +/************************************************************************************ + * Public Functions + ************************************************************************************/ + +/************************************************************************************ + * Name: up_switchcontext + * + * Description: + * Save the current thread context and restore the specified context. The full + * C function prototype is: + * + * void up_switchcontext(uint8_t *saveregs, uint8_t *restoreregs); + * + * On Entry: + * r24-r25: savregs + * r22-r23: restoreregs + * + * Return: + * up_switchcontext forces a context switch to the task "canned" in restoreregs. + * It does not 'return' in the normal sense, rather, it will context switch back + * to the function point. When it does 'return,' it is because the blocked + * task hat was "pickeled" in the saveregs "can" is again ready to run and has + * execution priority. + * + * Assumptions: + * global interrupts disabled by the caller. + * + ************************************************************************************/ + + .text + .globl up_switchcontext + .func up_switchcontext +up_switchcontext: + /* Use X ]r26:r27] to reference the save structure. (X is Call-used) */ + + movw r26, r24 + + /* Save the context to saveregs */ + + USER_SAVE + + /* Then fall through to do the full context restore with r24-r5 = restoreregs */ + + movw r24, r22 + .endfunc + +/**************************************************************************** + * Name: up_fullcontextrestore + * + * Descripion: + * Restore the full-running context of a thread. + * + * Input Parameters: + * r24-r25 = A pointer to the register save area of the thread to be restored. + * + * C Prototype: + * void up_fullcontextrestore(uint8_t *regs); + * + * Assumptions: + * Interrupts are disabled. + * + ****************************************************************************/ + + .text + .global up_fullcontextrestore + .func up_fullcontextrestore +up_fullcontextrestore: + /* Use X ]r26:r27] to reference the restore structure. */ + + movw r26, r24 + + /* Restore the context from the TCB saved registers */ + + TCB_RESTORE + .endfunc + .end + diff --git a/nuttx/arch/avr/src/avr32/up_copystate.c b/nuttx/arch/avr/src/avr32/up_copystate.c index ef8d5f3cb..e3e4da054 100644 --- a/nuttx/arch/avr/src/avr32/up_copystate.c +++ b/nuttx/arch/avr/src/avr32/up_copystate.c @@ -41,7 +41,6 @@ #include <stdint.h> -#include "os_internal.h" #include "up_internal.h" /**************************************************************************** diff --git a/nuttx/arch/avr/src/avr32/up_exceptions.S b/nuttx/arch/avr/src/avr32/up_exceptions.S index 4a7ade6fd..e104a2370 100755 --- a/nuttx/arch/avr/src/avr32/up_exceptions.S +++ b/nuttx/arch/avr/src/avr32/up_exceptions.S @@ -1,5 +1,5 @@ /****************************************************************************
- * arch/avr32/src/avr32/up_exceptions.S
+ * arch/avr/src/avr32/up_exceptions.S
*
* Copyright (C) 2010 Gregory Nutt. All rights reserved.
* Author: Gregory Nutt <spudmonkey@racsa.co.cr>
|