diff options
Diffstat (limited to 'nuttx/configs/README.txt')
-rw-r--r-- | nuttx/configs/README.txt | 20 |
1 files changed, 14 insertions, 6 deletions
diff --git a/nuttx/configs/README.txt b/nuttx/configs/README.txt index a4c9c9f8b..1d0eb0f8e 100644 --- a/nuttx/configs/README.txt +++ b/nuttx/configs/README.txt @@ -430,14 +430,14 @@ defconfig -- This is a configuration file similar to the Linux CONFIG_PAGING_AT45DB - Use the at45db.c FLASH driver. If this is selected, then the MTD interface to the Atmel AT45DB device will be used to support paging. - CONFIG_PAGING_BINOFFSET - If CONFIG_PAGING_M25PX or is CONFIG_PAGING_AT45DB - defined then CONFIG_PAGING_BINOFFSET will be used to specify the offset + CONFIG_PAGING_BINOFFSET - If CONFIG_PAGING_M25PX or is CONFIG_PAGING_AT45DB + defined then CONFIG_PAGING_BINOFFSET will be used to specify the offset in bytes into the FLASH device where the NuttX binary image is located. Default: 0 - CONFIG_PAGING_SPIPORT - If CONFIG_PAGING_M25PX CONFIG_PAGING_AT45DB is - defined and the device has multiple SPI busses (ports), then this - configuration should be set to indicate which SPI port the device is - connected. Default: 0 + CONFIG_PAGING_SPIPORT - If CONFIG_PAGING_M25PX CONFIG_PAGING_AT45DB is + defined and the device has multiple SPI busses (ports), then this + configuration should be set to indicate which SPI port the device is + connected. Default: 0 The following can be used to disable categories of APIs supported by the OS. If the compiler supports weak functions, then it @@ -557,6 +557,14 @@ defconfig -- This is a configuration file similar to the Linux CONFIG_NOKIA6100_PCF8833 - Selects the Phillips PCF8833 display controller CONFIG_NOKIA6100_BLINIT - Initial backlight setting + The following may need to be tuned for your hardware: + CONFIG_NOKIA6100_INVERT - Display inversion, 0 or 1, Default: 1 + CONFIG_NOKIA6100_MY - Display row direction, 0 or 1, Default: 0 + CONFIG_NOKIA6100_MX - Display column direction, 0 or 1, Default: 1 + CONFIG_NOKIA6100_V - Display address direction, 0 or 1, Default: 0 + CONFIG_NOKIA6100_ML - Display scan direction, 0 or 1, Default: 0 + CONFIG_NOKIA6100_RGBORD - Display RGB order, 0 or 1, Default: 0 + Required LCD driver settings: CONFIG_LCD_NOKIA6100 - Enable Nokia 6100 support CONFIG_LCD_MAXCONTRAST - must be 63 with the Epson controller and 127 with |