diff options
Diffstat (limited to 'nuttx/configs/README.txt')
-rw-r--r-- | nuttx/configs/README.txt | 15 |
1 files changed, 9 insertions, 6 deletions
diff --git a/nuttx/configs/README.txt b/nuttx/configs/README.txt index 66111d791..8f0e02ea2 100644 --- a/nuttx/configs/README.txt +++ b/nuttx/configs/README.txt @@ -423,14 +423,17 @@ defconfig -- This is a configuration file similar to the Linux CONFIG_PAGING_M25PX - Use the m25px.c FLASH driver. If this is selected, then the MTD interface to the M25Px device will be used to support paging. - CONFIG_PAGING_M25PX_BINOFFSET - If CONFIG_PAGING_M25PX is defined then - CONFIG_PAGING_M25PX_BINOFFSET will be used to specify the offset + CONFIG_PAGING_AT45DB - Use the at45db.c FLASH driver. If this is selected, + then the MTD interface to the Atmel AT45DB device will be used to support + paging. + CONFIG_PAGING_BINOFFSET - If CONFIG_PAGING_M25PX or is CONFIG_PAGING_AT45DB + defined then CONFIG_PAGING_BINOFFSET will be used to specify the offset in bytes into the FLASH device where the NuttX binary image is located. Default: 0 - CONFIG_PAGING_M25PX_SPIPORT - If CONFIG_PAGING_M25PX is defined and - the device has multiple SPI busses (ports), then this configuration - should be set to indicate which SPI port the M25Px device is connected. - Default: 0 + CONFIG_PAGING_SPIPORT - If CONFIG_PAGING_M25PX CONFIG_PAGING_AT45DB is + defined and the device has multiple SPI busses (ports), then this + configuration should be set to indicate which SPI port the device is + connected. Default: 0 The following can be used to disable categories of APIs supported by the OS. If the compiler supports weak functions, then it |