diff options
Diffstat (limited to 'nuttx/configs/README.txt')
| -rw-r--r-- | nuttx/configs/README.txt | 20 |
1 files changed, 20 insertions, 0 deletions
diff --git a/nuttx/configs/README.txt b/nuttx/configs/README.txt index b7d20065a..a4c9c9f8b 100644 --- a/nuttx/configs/README.txt +++ b/nuttx/configs/README.txt @@ -546,6 +546,26 @@ defconfig -- This is a configuration file similar to the Linux - All pixel writes must be aligned to byte boundaries. The latter limitation effectively reduces the 128x96 disply to 64x96. + Nokia 6100 Configuration Settings: + + CONFIG_NOKIA6100_SPIMODE - Controls the SPI mode + CONFIG_NOKIA6100_FREQUENCY - Define to use a different bus frequency + CONFIG_NOKIA6100_NINTERFACES - Specifies the number of physical Nokia + 6100 devices that will be supported. + CONFIG_NOKIA6100_BPP - Device supports 8, 12, and 16 bits per pixel. + CONFIG_NOKIA6100_S1D15G10 - Selects the Epson S1D15G10 display controller + CONFIG_NOKIA6100_PCF8833 - Selects the Phillips PCF8833 display controller + CONFIG_NOKIA6100_BLINIT - Initial backlight setting + + Required LCD driver settings: + CONFIG_LCD_NOKIA6100 - Enable Nokia 6100 support + CONFIG_LCD_MAXCONTRAST - must be 63 with the Epson controller and 127 with + the Phillips controller. + CONFIG_LCD_MAXPOWER - Maximum value of backlight setting. The backlight + control is managed outside of the 6100 driver so this value has no + meaning to the driver. Board-specific logic may place restrictions on + this value. + ENC28J60 Ethernet Driver Configuration Settings: CONFIG_NET_ENC28J60 - Enabled ENC28J60 support CONFIG_ENC28J60_SPIMODE - Controls the SPI mode |