diff options
Diffstat (limited to 'nuttx/configs/c5471evm/dhcpconfig')
-rw-r--r-- | nuttx/configs/c5471evm/dhcpconfig | 458 |
1 files changed, 0 insertions, 458 deletions
diff --git a/nuttx/configs/c5471evm/dhcpconfig b/nuttx/configs/c5471evm/dhcpconfig deleted file mode 100644 index fcad5b52a..000000000 --- a/nuttx/configs/c5471evm/dhcpconfig +++ /dev/null @@ -1,458 +0,0 @@ -############################################################################ -# configs/c5471evm/dhcpconfig -# -# Copyright (C) 2007-2010 Gregory Nutt. All rights reserved. -# Author: Gregory Nutt <spudmonkey@racsa.co.cr> -# -# Redistribution and use in source and binary forms, with or without -# modification, are permitted provided that the following conditions -# are met: -# -# 1. Redistributions of source code must retain the above copyright -# notice, this list of conditions and the following disclaimer. -# 2. Redistributions in binary form must reproduce the above copyright -# notice, this list of conditions and the following disclaimer in -# the documentation and/or other materials provided with the -# distribution. -# 3. Neither the name NuttX nor the names of its contributors may be -# used to endorse or promote products derived from this software -# without specific prior written permission. -# -# THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS -# "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT -# LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS -# FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE -# COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, -# INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, -# BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS -# OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED -# AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT -# LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN -# ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE -# POSSIBILITY OF SUCH DAMAGE. -# -############################################################################ -# -# architecture selection -# -# CONFIG_ARCH - identifies the arch subdirectory and, hence, the -# processor architecture. -# CONFIG_ARCH_family - for use in C code. This identifies the -# particular chip family that the architecture is implemented -# in. -# CONFIG_ARCH_architecture - for use in C code. This identifies the -# specific architecture within the chip familyl. -# CONFIG_ARCH_CHIP - Identifies the arch/*/chip subdirectory -# CONFIG_ARCH_CHIP_name - For use in C code -# CONFIG_ARCH_BOARD - identifies the configs subdirectory and, hence, -# the board that supports the particular chip or SoC. -# CONFIG_ARCH_BOARD_name - for use in C code -# CONFIG_BOARD_LOOPSPERMSEC - for delay loops -# CONFIG_ENDIAN_BIG - define if big endian (default is little endian) -# CONFIG_ROM_VECTORS - unique to c5471 -# CONFIG_DRAM_END - the size of installed DRAM. -# Unique to c5471 -# CONFIG_ARCH_LEDS - Use LEDs to show state. Unique to c5471. -# CONFIG_ARCH_INTERRUPTSTACK - This architecture supports an interrupt -# stack. If defined, this symbol is the size of the interrupt -# stack in bytes. If not defined, the user task stacks will be -# used during interrupt handling. -# CONFIG_ARCH_STACKDUMP - Do stack dumps after assertions -# -CONFIG_ARCH=arm -CONFIG_ARCH_ARM=y -CONFIG_ARCH_ARM7TDMI=y -CONFIG_ARCH_CHIP=c5471 -CONFIG_ARCH_CHIP_C5471=y -CONFIG_ARCH_BOARD=c5471evm -CONFIG_ARCH_BOARD_C5471EVM=y -CONFIG_BOARD_LOOPSPERMSEC=1250 -CONFIG_ROM_VECTORS=n -CONFIG_DRAM_END=0x11000000 -CONFIG_ARCH_LEDS=y -CONFIG_ARCH_INTERRUPTSTACK=0 -CONFIG_ARCH_STACKDUMP=y - -# -# C5471 specific device driver settings -# -# CONFIG_SERIAL_IRDA_CONSOLE - selects the IRDA UART for the -# console ant ttys0 (default is the modem UART). -# CONFIG_UART_*_HWFLOWCONTROL - enables hardware flow control -# CONFIG_UART_*_RXBUFSIZE - Characters are buffered as received. -# This specific the size of the receive buffer -# CONFIG_UART_*_TXBUFSIZE - Characters are buffered before -# being sent. This specific the size of the transmit buffer -# CONFIG_UART_*_BAUD - The configure BAUD of the UART. Must be -# CONFIG_UART_*_BITS - The number of bits. Must be either 7 or 8. -# CONFIG_UART_*_PARTIY - 0=no parity, 1=odd parity, 2=even parity -# CONFIG_UART_*_2STOP - Two stop bits -# -CONFIG_SERIAL_IRDA_CONSOLE=n -CONFIG_UART_IRDA_HWFLOWCONTROL=n -CONFIG_UART_MODEM_HWFLOWCONTROL=n -CONFIG_UART_IRDA_RXBUFSIZE=256 -CONFIG_UART_MODEM_RXBUFSIZE=256 -CONFIG_UART_IRDA_TXBUFSIZE=256 -CONFIG_UART_MODEM_TXBUFSIZE=256 -CONFIG_UART_IRDA_BAUD=115200 -CONFIG_UART_MODEM_BAUD=115200 -CONFIG_UART_IRDA_BITS=8 -CONFIG_UART_MODEM_BITS=8 -CONFIG_UART_IRDA_PARITY=0 -CONFIG_UART_MODEM_PARITY=0 -CONFIG_UART_IRDA_2STOP=0 -CONFIG_UART_MODEM_2STOP=0 - -# -# C5471 Ethernet Driver settings -CONFIG_C5471_NET_STATS=n -ETHERNET_PHY_LU3X31T_T64=1 -ETHERNET_PHY_AC101L=2 -CONFIG_C5471_ETHERNET_PHY=ETHERNET_PHY_LU3X31T_T64 -CONFIG_NET_C5471_AUTONEGOTIATION=y -CONFIG_NET_C5471_BASET100=n -CONFIG_NET_C5471_BASET10=n - -# -# General build options -# -# CONFIG_RRLOAD_BINARY - make the rrload binary format used with -# BSPs from www.ridgerun.com using the tools/mkimage.sh script -# CONFIG_INTELHEX_BINARY - make the Intel HEX binary format -# used with many different loaders using the GNU objcopy program -# Should not be selected if you are not using the GNU toolchain. -# CONFIG_RAW_BINARY - make a raw binary format file used with many -# different loaders using the GNU objcopy program. This option -# should not be selected if you are not using the GNU toolchain. -# CONFIG_HAVE_LIBM - toolchain supports libm.a -# -CONFIG_RRLOAD_BINARY=y -CONFIG_INTELHEX_BINARY=n -CONFIG_RAW_BINARY=n -CONFIG_HAVE_LIBM=n - -# -# General OS setup -# -# CONFIG_APP_DIR - Identifies the relative path to the directory -# that builds the application to link with NuttX. -# CONFIG_DEBUG - enables built-in debug options -# CONFIG_DEBUG_VERBOSE - enables verbose debug output -# CONFIG_DEBUG_SYMBOLS - build without optimization and with -# debug symbols (needed for use with a debugger). -# CONFIG_MM_REGIONS - If the architecture includes multiple -# regions of memory to allocate from, this specifies the -# number of memory regions that the memory manager must -# handle and enables the API mm_addregion(start, end); -# CONFIG_ARCH_LOWPUTC - architecture supports low-level, boot -# time console output -# CONFIG_TICKS_PER_MSEC - The default system timer is 100Hz -# or TICKS_PER_MSEC=10. This setting may be defined to -# inform NuttX that the processor hardware is providing -# system timer interrupts at some interrupt interval other -# than 10 msec. -# CONFIG_RR_INTERVAL - The round robin timeslice will be set -# this number of milliseconds; Round robin scheduling can -# be disabled by setting this value to zero. -# CONFIG_SCHED_INSTRUMENTATION - enables instrumentation in -# scheduler to monitor system performance -# CONFIG_TASK_NAME_SIZE - Spcifies that maximum size of a -# task name to save in the TCB. Useful if scheduler -# instrumentation is selected. Set to zero to disable. -# CONFIG_START_YEAR, CONFIG_START_MONTH, CONFIG_START_DAY - -# Used to initialize the internal time logic. -# CONFIG_JULIAN_TIME - Enables Julian time conversions -# CONFIG_DEV_CONSOLE - Set if architecture-specific logic -# provides /dev/console. Enables stdout, stderr, stdin. -# CONFIG_DEV_LOWCONSOLE - Use the simple, low-level serial console -# driver (minimul support) -# CONFIG_MUTEX_TYPES: Set to enable support for recursive and -# errorcheck mutexes. Enables pthread_mutexattr_settype(). -# CONFIG_PRIORITY_INHERITANCE : Set to enable support for priority -# inheritance on mutexes and semaphores. -# CONFIG_SEM_PREALLOCHOLDERS: This setting is only used if priority -# inheritance is enabled. It defines the maximum number of -# different threads (minus one) that can take counts on a -# semaphore with priority inheritance support. This may be -# set to zero if priority inheritance is disabled OR if you -# are only using semaphores as mutexes (only one holder) OR -# if no more than two threads participate using a counting -# semaphore. -# CONFIG_SEM_NNESTPRIO. If priority inheritance is enabled, -# then this setting is the maximum number of higher priority -# threads (minus 1) than can be waiting for another thread -# to release a count on a semaphore. This value may be set -# to zero if no more than one thread is expected to wait for -# a semaphore. -# CONFIG_FDCLONE_DISABLE. Disable cloning of all file descriptors -# by task_create() when a new task is started. If set, all -# files/drivers will appear to be closed in the new task. -# CONFIG_FDCLONE_STDIO. Disable cloning of all but the first -# three file descriptors (stdin, stdout, stderr) by task_create() -# when a new task is started. If set, all files/drivers will -# appear to be closed in the new task except for stdin, stdout, -# and stderr. -# CONFIG_SDCLONE_DISABLE. Disable cloning of all socket -# desciptors by task_create() when a new task is started. If -# set, all sockets will appear to be closed in the new task. -# CONFIG_NXFLAT. Enable support for the NXFLAT binary format. -# This format will support execution of NuttX binaries located -# in a ROMFS filesystem (see examples/nxflat). -# -CONFIG_APP_DIR=examples/uip -CONFIG_DEBUG=n -CONFIG_DEBUG_VERBOSE=n -CONFIG_DEBUG_SYMBOLS=n -CONFIG_MM_REGIONS=1 -CONFIG_ARCH_LOWPUTC=y -CONFIG_RR_INTERVAL=200 -CONFIG_SCHED_INSTRUMENTATION=n -CONFIG_TASK_NAME_SIZE=0 -CONFIG_START_YEAR=2007 -CONFIG_START_MONTH=2 -CONFIG_START_DAY=13 -CONFIG_JULIAN_TIME=n -CONFIG_DEV_CONSOLE=y -CONFIG_DEV_LOWCONSOLE=n -CONFIG_MUTEX_TYPES=n -CONFIG_PRIORITY_INHERITANCE=n -CONFIG_SEM_PREALLOCHOLDERS=0 -CONFIG_SEM_NNESTPRIO=0 -CONFIG_FDCLONE_DISABLE=n -CONFIG_FDCLONE_STDIO=n -CONFIG_SDCLONE_DISABLE=y -CONFIG_NXFLAT=n - -# -# The following can be used to disable categories of -# APIs supported by the OS. If the compiler supports -# weak functions, then it should not be necessary to -# disable functions unless you want to restrict usage -# of those APIs. -# -# There are certain dependency relationships in these -# features. -# -# o mq_notify logic depends on signals to awaken tasks -# waiting for queues to become full or empty. -# o pthread_condtimedwait() depends on signals to wake -# up waiting tasks. -# -CONFIG_DISABLE_CLOCK=n -CONFIG_DISABLE_POSIX_TIMERS=n -CONFIG_DISABLE_PTHREAD=n -CONFIG_DISABLE_SIGNALS=n -CONFIG_DISABLE_MQUEUE=y -CONFIG_DISABLE_MOUNTPOINT=y -CONFIG_DISABLE_ENVIRON=y -CONFIG_DISABLE_POLL=y - -# -# Misc libc settings -# -# CONFIG_NOPRINTF_FIELDWIDTH - sprintf-related logic is a -# little smaller if we do not support fieldwidthes -# -CONFIG_NOPRINTF_FIELDWIDTH=n - -# -# Allow for architecture optimized implementations -# -# The architecture can provide optimized versions of the -# following to improve sysem performance -# -CONFIG_ARCH_MEMCPY=n -CONFIG_ARCH_MEMCMP=n -CONFIG_ARCH_MEMMOVE=n -CONFIG_ARCH_MEMSET=n -CONFIG_ARCH_STRCMP=n -CONFIG_ARCH_STRCPY=n -CONFIG_ARCH_STRNCPY=n -CONFIG_ARCH_STRLEN=n -CONFIG_ARCH_STRNLEN=n -CONFIG_ARCH_BZERO=n -CONFIG_ARCH_KMALLOC=n -CONFIG_ARCH_KZMALLOC=n -CONFIG_ARCH_KFREE=n - -# -# Sizes of configurable things (0 disables) -# -# CONFIG_MAX_TASKS - The maximum number of simultaneously -# active tasks. This value must be a power of two. -# CONFIG_MAX_TASK_ARGS - This controls the maximum number of -# of parameters that a task may receive (i.e., maxmum value -# of 'argc') -# CONFIG_NPTHREAD_KEYS - The number of items of thread- -# specific data that can be retained -# CONFIG_NFILE_DESCRIPTORS - The maximum number of file -# descriptors (one for each open) -# CONFIG_NFILE_STREAMS - The maximum number of streams that -# can be fopen'ed -# CONFIG_NAME_MAX - The maximum size of a file name. -# CONFIG_STDIO_BUFFER_SIZE - Size of the buffer to allocate -# on fopen. (Only if CONFIG_NFILE_STREAMS > 0) -# CONFIG_NUNGET_CHARS - Number of characters that can be -# buffered by ungetc() (Only if CONFIG_NFILE_STREAMS > 0) -# CONFIG_PREALLOC_MQ_MSGS - The number of pre-allocated message -# structures. The system manages a pool of preallocated -# message structures to minimize dynamic allocations -# CONFIG_MQ_MAXMSGSIZE - Message structures are allocated with -# a fixed payload size given by this settin (does not include -# other message structure overhead. -# CONFIG_MAX_WDOGPARMS - Maximum number of parameters that -# can be passed to a watchdog handler -# CONFIG_PREALLOC_WDOGS - The number of pre-allocated watchdog -# structures. The system manages a pool of preallocated -# watchdog structures to minimize dynamic allocations -# CONFIG_PREALLOC_TIMERS - The number of pre-allocated POSIX -# timer structures. The system manages a pool of preallocated -# timer structures to minimize dynamic allocations. Set to -# zero for all dynamic allocations. -# -CONFIG_MAX_TASKS=64 -CONFIG_MAX_TASK_ARGS=4 -CONFIG_NPTHREAD_KEYS=4 -CONFIG_NFILE_DESCRIPTORS=8 -CONFIG_NFILE_STREAMS=8 -CONFIG_NAME_MAX=32 -CONFIG_STDIO_BUFFER_SIZE=1024 -CONFIG_NUNGET_CHARS=2 -CONFIG_PREALLOC_MQ_MSGS=32 -CONFIG_MQ_MAXMSGSIZE=32 -CONFIG_MAX_WDOGPARMS=4 -CONFIG_PREALLOC_WDOGS=8 -CONFIG_PREALLOC_TIMERS=8 - -# -# TCP/IP and UDP support via uIP -# CONFIG_NET - Enable or disable all network features -# CONFIG_NET_IPv6 - Build in support for IPv6 -# CONFIG_NSOCKET_DESCRIPTORS - Maximum number of socket descriptors per task/thread. -# CONFIG_NET_SOCKOPTS - Enable or disable support for socket options -# CONFIG_NET_BUFSIZE - uIP buffer size -# CONFIG_NET_TCP - TCP support on or off -# CONFIG_NET_TCP_CONNS - Maximum number of TCP connections (all tasks) -# CONFIG_NET_TCP_READAHEAD_BUFSIZE - Size of TCP read-ahead buffers -# CONFIG_NET_NTCP_READAHEAD_BUFFERS - Number of TCP read-ahead buffers (may be zero) -# CONFIG_NET_TCPBACKLOG - Incoming connections pend in a backlog until -# accept() is called. The size of the backlog is selected when listen() is called. -# CONFIG_NET_MAX_LISTENPORTS - Maximum number of listening TCP ports (all tasks) -# CONFIG_NET_UDP - UDP support on or off -# CONFIG_NET_UDP_CHECKSUMS - UDP checksums on or off -# CONFIG_NET_UDP_CONNS - The maximum amount of concurrent UDP connections -# CONFIG_NET_ICMP - ICMP ping response support on or off -# CONFIG_NET_ICMP_PING - ICMP ping request support on or off -# CONFIG_NET_PINGADDRCONF - Use "ping" packet for setting IP address -# CONFIG_NET_STATISTICS - uIP statistics on or off -# CONFIG_NET_RECEIVE_WINDOW - The size of the advertised receiver's window -# CONFIG_NET_ARPTAB_SIZE - The size of the ARP table -# CONFIG_NET_BROADCAST - Broadcast support -# CONFIG_NET_FWCACHE_SIZE - number of packets to remember when looking for duplicates -# -CONFIG_NET=y -CONFIG_NET_IPv6=n -CONFIG_NSOCKET_DESCRIPTORS=8 -CONFIG_NET_SOCKOPTS=y -CONFIG_NET_BUFSIZE=420 -CONFIG_NET_TCP=n -CONFIG_NET_TCP_CONNS=0 -CONFIG_NET_NTCP_READAHEAD_BUFFERS=0 -CONFIG_NET_TCPBACKLOG=n -CONFIG_NET_MAX_LISTENPORTS=0 -CONFIG_NET_UDP=y -CONFIG_NET_UDP_CHECKSUMS=y -#CONFIG_NET_UDP_CONNS=10 -CONFIG_NET_ICMP=y -CONFIG_NET_ICMP_PING=n -#CONFIG_NET_PINGADDRCONF=0 -CONFIG_NET_STATISTICS=n -#CONFIG_NET_RECEIVE_WINDOW= -#CONFIG_NET_ARPTAB_SIZE=8 -CONFIG_NET_BROADCAST=y -#CONFIG_NET_FWCACHE_SIZE=2 - -# -# UIP Network Utilities -# CONFIG_NET_DHCP_LIGHT - Reduces size of DHCP -# CONFIG_NET_RESOLV_ENTRIES - Number of resolver entries -CONFIG_NET_DHCP_LIGHT=n -CONFIG_NET_RESOLV_ENTRIES=4 - -# -# Settings for examples/uip -CONFIG_EXAMPLE_UIP_NOMAC=y -CONFIG_EXAMPLE_UIP_IPADDR=(10<<24|0<<16|0<<8|2) -CONFIG_EXAMPLE_UIP_DRIPADDR=(10<<24|0<<16|0<<8|1) -CONFIG_EXAMPLE_UIP_NETMASK=(255<<24|255<<16|255<<8|0) -CONFIG_EXAMPLE_UIP_DHCPC=y - -# -# Settings for examples/nettest -CONFIG_EXAMPLE_NETTEST_SERVER=n -CONFIG_EXAMPLE_NETTEST_PERFORMANCE=n -CONFIG_EXAMPLE_NETTEST_NOMAC=y -CONFIG_EXAMPLE_NETTEST_IPADDR=(10<<24|0<<16|0<<8|2) -CONFIG_EXAMPLE_NETTEST_DRIPADDR=(10<<24|0<<16|0<<8|1) -CONFIG_EXAMPLE_NETTEST_NETMASK=(255<<24|255<<16|255<<8|0) -CONFIG_EXAMPLE_NETTEST_CLIENTIP=(10<<24|0<<16|0<<8|1) - -# -# Settings for examples/nsh -CONFIG_NSH_CONSOLE=y -CONFIG_NSH_TELNET=n -CONFIG_NSH_IOBUFFER_SIZE=512 -CONFIG_NSH_CMD_SIZE=40 -CONFIG_NSH_STACKSIZE=4096 -CONFIG_NSH_DHCPC=n -CONFIG_NSH_NOMAC=n -CONFIG_NSH_IPADDR=(10<<24|0<<16|0<<8|2) -CONFIG_NSH_DRIPADDR=(10<<24|0<<16|0<<8|1) -CONFIG_NSH_NETMASK=(255<<24|255<<16|255<<8|0) - -# -# Settings for examples/wget -# CONFIG_EXAMPLE_WGET_URL - The URL of the file to get -# CONFIG_EXAMPLE_WGET_NOMAC - (May be defined to use software assigned MAC) -# CONFIG_EXAMPLE_WGET_IPADDR - Target IP address -# CONFIG_EXAMPLE_WGET_DRIPADDR - Default router IP addess -# CONFIG_EXAMPLE_WGET_NETMASK - Network mask -CONFIG_EXAMPLE_WGET_URL="http://www.nuttx.org/index.html" -CONFIG_EXAMPLE_WGET_NOMAC=y -CONFIG_EXAMPLE_WGET_IPADDR=(10L<<24|0L<<16|0L<<8|2L) -CONFIG_EXAMPLE_WGET_DRIPADDR=(10L<<24|0L<<16|0L<<8|1L) -CONFIG_EXAMPLE_WGET_NETMASK=(255L<<24|255L<<16|255L<<8|0L) - -# -# Stack and heap information -# -# CONFIG_BOOT_RUNFROMFLASH - Some configurations support XIP -# operation from FLASH but must copy initialized .data sections to RAM. -# CONFIG_BOOT_COPYTORAM - Some configurations boot in FLASH -# but copy themselves entirely into RAM for better performance. -# CONFIG_CUSTOM_STACK - The up_ implementation will handle -# all stack operations outside of the nuttx model. -# CONFIG_STACK_POINTER - The initial stack pointer (arm7tdmi only) -# CONFIG_IDLETHREAD_STACKSIZE - The size of the initial stack. -# This is the thread that (1) performs the inital boot of the system up -# to the point where user_start() is spawned, and (2) there after is the -# IDLE thread that executes only when there is no other thread ready to -# run. -# CONFIG_USERMAIN_STACKSIZE - The size of the stack to allocate -# for the main user thread that begins at the user_start() entry point. -# CONFIG_PTHREAD_STACK_MIN - Minimum pthread stack size -# CONFIG_PTHREAD_STACK_DEFAULT - Default pthread stack size -# CONFIG_HEAP_BASE - The beginning of the heap -# CONFIG_HEAP_SIZE - The size of the heap -# -CONFIG_BOOT_RUNFROMFLASH=n -CONFIG_BOOT_COPYTORAM=n -CONFIG_CUSTOM_STACK=n -CONFIG_STACK_POINTER= -CONFIG_IDLETHREAD_STACKSIZE=4096 -CONFIG_USERMAIN_STACKSIZE=4096 -CONFIG_PTHREAD_STACK_MIN=256 -CONFIG_PTHREAD_STACK_DEFAULT=4096 -CONFIG_HEAP_BASE= -CONFIG_HEAP_SIZE= |