diff options
Diffstat (limited to 'nuttx/configs/demo9s12ne64/README.txt')
-rwxr-xr-x | nuttx/configs/demo9s12ne64/README.txt | 27 |
1 files changed, 15 insertions, 12 deletions
diff --git a/nuttx/configs/demo9s12ne64/README.txt b/nuttx/configs/demo9s12ne64/README.txt index b9581b0ed..7afcb06b1 100755 --- a/nuttx/configs/demo9s12ne64/README.txt +++ b/nuttx/configs/demo9s12ne64/README.txt @@ -50,7 +50,7 @@ NuttX buildroot Toolchain building a Cortex-M3 toolchain for Cygwin under Windows. -HC12/DEMO9S12NEC64-specific Configuration Options +HCS12/DEMO9S12NEC64-specific Configuration Options ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^ CONFIG_ARCH - Identifies the arch/ subdirectory. This should @@ -64,7 +64,7 @@ HC12/DEMO9S12NEC64-specific Configuration Options CONFIG_ARCH_architecture - For use in C code: - CONFIG_ARCH_HC12=y + CONFIG_ARCH_HCS12=y CONFIG_ARCH_CHIP - Identifies the arch/*/chip subdirectory @@ -112,31 +112,34 @@ HC12/DEMO9S12NEC64-specific Configuration Options the 100 second delay then adjust CONFIG_ARCH_LOOPSPERMSEC until the delay actually is 100 seconds. - HC12 specific chip initialization + HCS12 specific chip initialization - HC12 specific device driver settings + HCS12 specific device driver settings - CONFIG_UARTn_SERIAL_CONSOLE - selects the UARTn for the + CONFIG_HCS12_SERIALMON - Indicates that the target systems uses + the Freescale serial bootloader. + + CONFIG_SCIO_SERIAL_CONSOLE - selects the SCIO for the console and ttys0 (default is the UART0). - CONFIG_UARTn_RXBUFSIZE - Characters are buffered as received. + CONFIG_SCIO_RXBUFSIZE - Characters are buffered as received. This specific the size of the receive buffer - CONFIG_UARTn_TXBUFSIZE - Characters are buffered before + CONFIG_SCIO_TXBUFSIZE - Characters are buffered before being sent. This specific the size of the transmit buffer - CONFIG_UARTn_BAUD - The configure BAUD of the UART. + CONFIG_SCIO_BAUD - The configure BAUD of the UART. - CONFIG_UARTn_BITS - The number of bits. Must be either 7 or 8. + CONFIG_SCIO_BITS - The number of bits. Must be either 7 or 8. - CONFIG_UARTn_PARTIY - 0=no parity, 1=odd parity, 2=even parity, 3=mark 1, 4=space 0 + CONFIG_SCIO_PARTIY - 0=no parity, 1=odd parity, 2=even parity, 3=mark 1, 4=space 0 - CONFIG_UARTn_2STOP - Two stop bits + CONFIG_SCIO_2STOP - Two stop bits Configurations ^^^^^^^^^^^^^^ -Each Freescale HC12 configuration is maintained in a sudirectory and +Each Freescale HCS12 configuration is maintained in a sudirectory and can be selected as follow: cd tools |