diff options
Diffstat (limited to 'nuttx/configs/ea3131')
31 files changed, 1065 insertions, 1064 deletions
diff --git a/nuttx/configs/ea3131/README.txt b/nuttx/configs/ea3131/README.txt index db6fc0b8d..4b8a8705e 100755 --- a/nuttx/configs/ea3131/README.txt +++ b/nuttx/configs/ea3131/README.txt @@ -43,12 +43,12 @@ GNU Toolchain Options add one of the following configuration options to your .config (or defconfig) file: - CONFIG_LPC313X_CODESOURCERYW=y : CodeSourcery under Windows - CONFIG_LPC313X_CODESOURCERYL=y : CodeSourcery under Linux - CONFIG_LPC313X_DEVKITARM=y : devkitARM under Windows - CONFIG_LPC313X_BUILDROOT=y : NuttX buildroot under Linux or Cygwin (default) + CONFIG_LPC31XX_CODESOURCERYW=y : CodeSourcery under Windows + CONFIG_LPC31XX_CODESOURCERYL=y : CodeSourcery under Linux + CONFIG_LPC31XX_DEVKITARM=y : devkitARM under Windows + CONFIG_LPC31XX_BUILDROOT=y : NuttX buildroot under Linux or Cygwin (default) - If you are not using CONFIG_LPC313X_BUILDROOT, then you may also have to modify + If you are not using CONFIG_LPC31XX_BUILDROOT, then you may also have to modify the PATH in the setenv.h file if your make cannot find the tools. NOTE: the CodeSourcery (for Windows), devkitARM, and Raisonance toolchains are @@ -117,13 +117,13 @@ IDEs 2) Start the NuttX build at least one time from the Cygwin command line before trying to create your project. This is necessary to create certain auto-generated files and directories that will be needed. - 3) Set up include pathes: You will need include/, arch/arm/src/lpc313x, + 3) Set up include pathes: You will need include/, arch/arm/src/lpc31xx, arch/arm/src/common, arch/arm/src/cortexm3, and sched/. 4) All assembly files need to have the definition option -D __ASSEMBLY__ on the command line. Startup files will probably cause you some headaches. The NuttX startup file - is arch/arm/src/lpc313x/lpc313x_vectors.S. With RIDE, I have to build NuttX + is arch/arm/src/lpc31xx/lpc31_vectors.S. With RIDE, I have to build NuttX one time from the Cygwin command line in order to obtain the pre-built startup object needed by RIDE. @@ -426,7 +426,7 @@ On-Demand Paging NOTE: See the TODO list in the top-level directory: - "arch/arm/src/lpc313x/lpc313x_spi.c may or may not be functional. It was + "arch/arm/src/lpc31xx/lpc31_spi.c may or may not be functional. It was reported to be working, but I was unable to get it working with the Atmel at45dbxx serial FLASH driver." @@ -549,27 +549,27 @@ ARM/EA3131-specific Configuration Options Individual subsystems can be enabled: - CONFIG_LPC313X_MCI, CONFIG_LPC313X_SPI, CONFIG_LPC313X_UART + CONFIG_LPC31XX_MCI, CONFIG_LPC31XX_SPI, CONFIG_LPC31XX_UART External memory available on the board (see also CONFIG_MM_REGIONS) - CONFIG_LPC313X_EXTSRAM0 - Select if external SRAM0 is present - CONFIG_LPC313X_EXTSRAM0HEAP - Select if external SRAM0 should be + CONFIG_LPC31XX_EXTSRAM0 - Select if external SRAM0 is present + CONFIG_LPC31XX_EXTSRAM0HEAP - Select if external SRAM0 should be configured as part of the NuttX heap. - CONFIG_LPC313X_EXTSRAM0SIZE - Size (in bytes) of the installed + CONFIG_LPC31XX_EXTSRAM0SIZE - Size (in bytes) of the installed external SRAM0 memory - CONFIG_LPC313X_EXTSRAM1 - Select if external SRAM1 is present - CONFIG_LPC313X_EXTSRAM1HEAP - Select if external SRAM1 should be + CONFIG_LPC31XX_EXTSRAM1 - Select if external SRAM1 is present + CONFIG_LPC31XX_EXTSRAM1HEAP - Select if external SRAM1 should be configured as part of the NuttX heap. - CONFIG_LPC313X_EXTSRAM1SIZE - Size (in bytes) of the installed + CONFIG_LPC31XX_EXTSRAM1SIZE - Size (in bytes) of the installed external SRAM1 memory - CONFIG_LPC313X_EXTSDRAM - Select if external SDRAM is present - CONFIG_LPC313X_EXTSDRAMHEAP - Select if external SDRAM should be + CONFIG_LPC31XX_EXTSDRAM - Select if external SDRAM is present + CONFIG_LPC31XX_EXTSDRAMHEAP - Select if external SDRAM should be configured as part of the NuttX heap. - CONFIG_LPC313X_EXTSDRAMSIZE - Size (in bytes) of the installed + CONFIG_LPC31XX_EXTSDRAMSIZE - Size (in bytes) of the installed external SDRAM memory - CONFIG_LPC313X_EXTNAND - Select if external NAND is present - CONFIG_LPC313X_EXTSDRAMSIZE - Size (in bytes) of the installed + CONFIG_LPC31XX_EXTNAND - Select if external NAND is present + CONFIG_LPC31XX_EXTSDRAMSIZE - Size (in bytes) of the installed external NAND memory LPC313X specific device driver settings diff --git a/nuttx/configs/ea3131/include/board.h b/nuttx/configs/ea3131/include/board.h index 464099107..7e0a01b6a 100755 --- a/nuttx/configs/ea3131/include/board.h +++ b/nuttx/configs/ea3131/include/board.h @@ -44,7 +44,7 @@ #include <nuttx/config.h> #ifndef __ASSEMBLY__ # include <stdint.h> -# include "lpc313x_cgudrvr.h" +# include "lpc31_cgudrvr.h" #endif /************************************************************************************ @@ -131,16 +131,16 @@ extern "C" { * Public Function Prototypes ************************************************************************************/ /************************************************************************************ - * Name: lpc313x_boardinitialize + * Name: lpc31_boardinitialize * * Description: - * All LPC313X architectures must provide the following entry point. This entry + * All LPC31XX architectures must provide the following entry point. This entry * point is called early in the intitialization -- after all memory has been * configured and mapped but before any devices have been initialized. * ************************************************************************************/ -EXTERN void lpc313x_boardinitialize(void); +EXTERN void lpc31_boardinitialize(void); /************************************************************************************ * Button support. diff --git a/nuttx/configs/ea3131/include/board_memorymap.h b/nuttx/configs/ea3131/include/board_memorymap.h index 576228aad..2604865c1 100755 --- a/nuttx/configs/ea3131/include/board_memorymap.h +++ b/nuttx/configs/ea3131/include/board_memorymap.h @@ -2,7 +2,7 @@ * configs/ea3131/include/board_memorymap.h * include/arch/board/board_memorymap.h * - * Copyright (C) 2009-2010 Gregory Nutt. All rights reserved. + * Copyright (C) 2009-2011 Gregory Nutt. All rights reserved. * Author: Gregory Nutt <spudmonkey@racsa.co.cr> * * Redistribution and use in source and binary forms, with or without @@ -38,7 +38,7 @@ #define __ARCH_BOARD_BOARD_MEMORYMAP_H /* This file should never be included directly, but only indirectly via - * lpc313x_memorymap.h. + * lpc31_memorymap.h. */ /************************************************************************************ @@ -51,44 +51,44 @@ * Definitions ************************************************************************************/ -/* If the LPC313x ROM page table is selected, then the board-logic is required +/* If the LPC31xx ROM page table is selected, then the board-logic is required * to provide: * * PGTABLE_BASE_PADDR - The physical address of the page table in ROM, * PGTABLE_BASE_VADDR - The mapped address of the page table in ROM, and - * Mappings for each of the PSECTIONS in lpc313x_memorymap.h + * Mappings for each of the PSECTIONS in lpc31_memorymap.h */ #ifdef CONFIG_ARCH_ROMPGTABLE - /* The LPC313x ROM page table uses a 1-1 physical to virtual memory mapping */ + /* The LPC31xx ROM page table uses a 1-1 physical to virtual memory mapping */ -# define LPC313X_SHADOWSPACE_VSECTION 0x00000000 /* 0x00000000-0x00000fff: Shadow Area 4Kb */ -# define LPC313X_INTSRAM_VSECTION 0x11028000 /* Internal SRAM 96Kb-192Kb */ -# define LPC313X_INTSRAM0_VADDR 0x11028000 /* 0x11028000-0x1103ffff: Internal SRAM 0 96Kb */ -# define LPC313X_INTSRAM1_VADDR 0x11040000 /* 0x11040000-0x11057fff: Internal SRAM 1 96Kb */ -# define LPC313X_INTSROM0_VSECTION 0x12000000 /* 0x12000000-0x1201ffff: Internal SROM 0 128Kb */ -# define LPC313X_APB01_VSECTION 0x13000000 /* 0x13000000-0x1300bfff: APB0 32Kb APB1 16Kb*/ -# define LPC313X_APB0_VADDR 0x13000000 /* 0x13000000-0x13007fff: APB0 32Kb */ -# define LPC313X_APB1_VADDR 0x13008000 /* 0x13008000-0x1300bfff: APB1 16Kb */ -# define LPC313X_APB2_VSECTION 0x15000000 /* 0x15000000-0x15003fff: APB2 16Kb */ -# define LPC313X_APB3_VSECTION 0x16000000 /* 0x16000000-0x160003ff: APB3 1Kb */ -# define LPC313X_APB4MPMC_VSECTION 0x17000000 /* 8Kb */ -# define LPC313X_APB4_VADDR 0x17000000 /* 0x17000000-0x17000fff: APB4 4Kb */ -# define LPC313X_MPMC_VADDR 0x17008000 /* 0x17008000-0x17008fff: MPMC cfg 4Kb */ -# define LPC313X_MCI_VSECTION 0x18000000 /* 0x18000000 0x180003ff: MCI/SD/SDIO 1Kb */ -# define LPC313X_USBOTG_VSECTION 0x19000000 /* 0x19000000-0x19000fff: USB OTG 4Kb */ -# define LPC313X_EXTSRAM_VSECTION 0x20020000 /* 64-128Kb */ -# define LPC313X_EXTSRAM0_VADDR 0x20000000 /* 0x20000000-0x2001ffff: External SRAM 0 64-128Kb */ -# define LPC313X_EXTSRAM1_VADDR 0x20020000 /* 0x20020000-0x2003ffff: External SRAM 1 64-128Kb */ -# define LPC313X_EXTSDRAM0_VSECTION 0x30000000 /* 0x30000000-0x37ffffff: External SDRAM 0 128Mb */ -# define LPC313X_INTC_VSECTION 0x60000000 /* 0x60000000-0x60000fff: Interrupt controller 4Kb */ -# define LPC313X_NAND_VSECTION 0x70000000 /* 0x70000000-0x700007ff: NANDFLASH Ctrl 2Kb */ +# define LPC31_SHADOWSPACE_VSECTION 0x00000000 /* 0x00000000-0x00000fff: Shadow Area 4Kb */ +# define LPC31_INTSRAM_VSECTION 0x11028000 /* Internal SRAM 96Kb-192Kb */ +# define LPC31_INTSRAM0_VADDR 0x11028000 /* 0x11028000-0x1103ffff: Internal SRAM 0 96Kb */ +# define LPC31_INTSRAM1_VADDR 0x11040000 /* 0x11040000-0x11057fff: Internal SRAM 1 96Kb */ +# define LPC31_INTSROM0_VSECTION 0x12000000 /* 0x12000000-0x1201ffff: Internal SROM 0 128Kb */ +# define LPC31_APB01_VSECTION 0x13000000 /* 0x13000000-0x1300bfff: APB0 32Kb APB1 16Kb*/ +# define LPC31_APB0_VADDR 0x13000000 /* 0x13000000-0x13007fff: APB0 32Kb */ +# define LPC31_APB1_VADDR 0x13008000 /* 0x13008000-0x1300bfff: APB1 16Kb */ +# define LPC31_APB2_VSECTION 0x15000000 /* 0x15000000-0x15003fff: APB2 16Kb */ +# define LPC31_APB3_VSECTION 0x16000000 /* 0x16000000-0x160003ff: APB3 1Kb */ +# define LPC31_APB4MPMC_VSECTION 0x17000000 /* 8Kb */ +# define LPC31_APB4_VADDR 0x17000000 /* 0x17000000-0x17000fff: APB4 4Kb */ +# define LPC31_MPMC_VADDR 0x17008000 /* 0x17008000-0x17008fff: MPMC cfg 4Kb */ +# define LPC31_MCI_VSECTION 0x18000000 /* 0x18000000 0x180003ff: MCI/SD/SDIO 1Kb */ +# define LPC31_USBOTG_VSECTION 0x19000000 /* 0x19000000-0x19000fff: USB OTG 4Kb */ +# define LPC31_EXTSRAM_VSECTION 0x20020000 /* 64-128Kb */ +# define LPC31_EXTSRAM0_VADDR 0x20000000 /* 0x20000000-0x2001ffff: External SRAM 0 64-128Kb */ +# define LPC31_EXTSRAM1_VADDR 0x20020000 /* 0x20020000-0x2003ffff: External SRAM 1 64-128Kb */ +# define LPC31_EXTSDRAM0_VSECTION 0x30000000 /* 0x30000000-0x37ffffff: External SDRAM 0 128Mb */ +# define LPC31_INTC_VSECTION 0x60000000 /* 0x60000000-0x60000fff: Interrupt controller 4Kb */ +# define LPC31_NAND_VSECTION 0x70000000 /* 0x70000000-0x700007ff: NANDFLASH Ctrl 2Kb */ /* Define the address of the page table within the ROM */ -# define ROMPGTABLE_OFFSET 0x0001c000 /* Offset of the ROM page table in ROM */ -# define PGTABLE_BASE_PADDR (LPC313X_INTSROM0_PSECTION+ROMPGTABLE_OFFSET) -# define PGTABLE_BASE_VADDR (LPC313X_INTSROM0_VSECTION+ROMPGTABLE_OFFSET) +# define ROMPGTABLE_OFFSET 0x0001c000 /* Offset of the ROM page table in ROM */ +# define PGTABLE_BASE_PADDR (LPC31_INTSROM0_PSECTION+ROMPGTABLE_OFFSET) +# define PGTABLE_BASE_VADDR (LPC31_INTSROM0_VSECTION+ROMPGTABLE_OFFSET) #endif /************************************************************************************ diff --git a/nuttx/configs/ea3131/locked/mklocked.sh b/nuttx/configs/ea3131/locked/mklocked.sh index 8457ab818..ac99f4438 100755 --- a/nuttx/configs/ea3131/locked/mklocked.sh +++ b/nuttx/configs/ea3131/locked/mklocked.sh @@ -117,7 +117,7 @@ echo "EXTERN(up_vectoraddrexcptn)" >>ld-locked.inc echo "EXTERN(up_timerinit)" >>ld-locked.inc -answer=$(checkconfig CONFIG_LPC313X_UART) +answer=$(checkconfig CONFIG_LPC31XX_UART) if [ $answer = y ]; then echo "EXTERN(up_earlyserialinit)" >>ld-locked.inc fi diff --git a/nuttx/configs/ea3131/nsh/Make.defs b/nuttx/configs/ea3131/nsh/Make.defs index 162397f8b..247cb6ebd 100755 --- a/nuttx/configs/ea3131/nsh/Make.defs +++ b/nuttx/configs/ea3131/nsh/Make.defs @@ -37,23 +37,23 @@ include ${TOPDIR}/.config # Setup for the selected toolchain -ifeq ($(CONFIG_LPC313X_CODESOURCERYW),y) +ifeq ($(CONFIG_LPC31XX_CODESOURCERYW),y) # CodeSourcery under Windows CROSSDEV = arm-none-eabi- WINTOOL = y MAXOPTIMIZATION = -O2 endif -ifeq ($(CONFIG_LPC313X_CODESOURCERYL),y) +ifeq ($(CONFIG_LPC31XX_CODESOURCERYL),y) # CodeSourcery under Linux CROSSDEV = arm-none-eabi- MAXOPTIMIZATION = -O2 endif -ifeq ($(CONFIG_LPC313X_DEVKITARM),y) +ifeq ($(CONFIG_LPC31XX_DEVKITARM),y) # devkitARM under Windows CROSSDEV = arm-eabi- WINTOOL = y endif -ifeq ($(CONFIG_LPC313X_BUILDROOT),y) +ifeq ($(CONFIG_LPC31XX_BUILDROOT),y) # NuttX buildroot under Linux or Cygwin CROSSDEV = arm-elf- MAXOPTIMIZATION = -Os @@ -121,7 +121,7 @@ OBJEXT = .o LIBEXT = .a EXEEXT = -ifneq ($(CONFIG_LPC313X_BUILDROOT),y) +ifneq ($(CONFIG_LPC31XX_BUILDROOT),y) LDFLAGS += -nostartfiles -nodefaultlibs endif ifeq ($(CONFIG_DEBUG_SYMBOLS),y) diff --git a/nuttx/configs/ea3131/nsh/defconfig b/nuttx/configs/ea3131/nsh/defconfig index 29da6335d..0c7193079 100755 --- a/nuttx/configs/ea3131/nsh/defconfig +++ b/nuttx/configs/ea3131/nsh/defconfig @@ -50,13 +50,13 @@ # CONFIG_ENDIAN_BIG - define if big endian (default is little endian) # CONFIG_BOARD_LOOPSPERMSEC - for delay loops # CONFIG_DRAM_SIZE - For most ARM9 architectures, this describes the -# size of installed DRAM. For the LPC313X, it is used only to +# size of installed DRAM. For the LPC31XX, it is used only to # deterimine how to map the executable regions. It is SDRAM size # only if you are executing out of the external SDRAM; or it could # be NOR FLASH size, external SRAM size, or internal SRAM size. # CONFIG_DRAM_START - The start address of DRAM (physical) # CONFIG_DRAM_VSTART - The startaddress of DRAM (virtual) -# CONFIG_ARCH_IRQPRIO - The LPC313x supports interrupt prioritization +# CONFIG_ARCH_IRQPRIO - The LPC31xx supports interrupt prioritization # CONFIG_ARCH_INTERRUPTSTACK - This architecture supports an interrupt # stack. If defined, this symbol is the size of the interrupt # stack in bytes. If not defined, the user task stacks will be @@ -76,7 +76,7 @@ CONFIG_ARCH=arm CONFIG_ARCH_ARM=y CONFIG_ARCH_ARM926EJS=y -CONFIG_ARCH_CHIP=lpc313x +CONFIG_ARCH_CHIP=lpc31xx CONFIG_ARCH_CHIP_LPC3131=y CONFIG_ARCH_BOARD=ea3131 CONFIG_ARCH_BOARD_EA3131=y @@ -108,54 +108,54 @@ CONFIG_ARCH_ROMPGTABLE=y # Identify toolchain and linker options # -CONFIG_LPC313X_CODESOURCERYW=n -CONFIG_LPC313X_CODESOURCERYL=n -CONFIG_LPC313X_DEVKITARM=n -CONFIG_LPC313X_BUILDROOT=y +CONFIG_LPC31XX_CODESOURCERYW=n +CONFIG_LPC31XX_CODESOURCERYL=n +CONFIG_LPC31XX_DEVKITARM=n +CONFIG_LPC31XX_BUILDROOT=y # # Individual subsystems can be enabled: # -CONFIG_LPC313X_MCI=n -CONFIG_LPC313X_SPI=n -CONFIG_LPC313X_UART=y +CONFIG_LPC31XX_MCI=n +CONFIG_LPC31XX_SPI=n +CONFIG_LPC31XX_UART=y # # Exernal memory available on the board (see also CONFIG_MM_REGIONS) # -# CONFIG_LPC313X_EXTSRAM0 - Select if external SRAM0 is present -# CONFIG_LPC313X_EXTSRAM0HEAP - Select if external SRAM0 should be +# CONFIG_LPC31XX_EXTSRAM0 - Select if external SRAM0 is present +# CONFIG_LPC31XX_EXTSRAM0HEAP - Select if external SRAM0 should be # configured as part of the NuttX heap. -# CONFIG_LPC313X_EXTSRAM0SIZE - Size (in bytes) of the installed +# CONFIG_LPC31XX_EXTSRAM0SIZE - Size (in bytes) of the installed # external SRAM0 memory -# CONFIG_LPC313X_EXTSRAM1 - Select if external SRAM1 is present -# CONFIG_LPC313X_EXTSRAM1HEAP - Select if external SRAM1 should be +# CONFIG_LPC31XX_EXTSRAM1 - Select if external SRAM1 is present +# CONFIG_LPC31XX_EXTSRAM1HEAP - Select if external SRAM1 should be # configured as part of the NuttX heap. -# CONFIG_LPC313X_EXTSRAM1SIZE - Size (in bytes) of the installed +# CONFIG_LPC31XX_EXTSRAM1SIZE - Size (in bytes) of the installed # external SRAM1 memory -# CONFIG_LPC313X_EXTSDRAM - Select if external SDRAM is present -# CONFIG_LPC313X_EXTSDRAMHEAP - Select if external SDRAM should be +# CONFIG_LPC31XX_EXTSDRAM - Select if external SDRAM is present +# CONFIG_LPC31XX_EXTSDRAMHEAP - Select if external SDRAM should be # configured as part of the NuttX heap. -# CONFIG_LPC313X_EXTSDRAMSIZE - Size (in bytes) of the installed +# CONFIG_LPC31XX_EXTSDRAMSIZE - Size (in bytes) of the installed # external SDRAM memory -# CONFIG_LPC313X_EXTNAND - Select if external NAND is present -# CONFIG_LPC313X_EXTSDRAMSIZE - Size (in bytes) of the installed +# CONFIG_LPC31XX_EXTNAND - Select if external NAND is present +# CONFIG_LPC31XX_EXTSDRAMSIZE - Size (in bytes) of the installed # external NAND memory # -CONFIG_LPC313X_EXTSRAM0=n -CONFIG_LPC313X_EXTSRAM0HEAP=n -CONFIG_LPC313X_EXTSRAM0SIZE=(128*1024) -CONFIG_LPC313X_EXTSRAM1=n -CONFIG_LPC313X_EXTSRAM1HEAP=n -CONFIG_LPC313X_EXTSRAM1SIZE=(128*1024) -CONFIG_LPC313X_EXTSDRAM=n -CONFIG_LPC313X_EXTSDRAMHEAP=n -CONFIG_LPC313X_EXTSDRAMSIZE=(64*1024*1024) -CONFIG_LPC313X_EXTNAND=n -CONFIG_LPC313X_EXTNANDSIZE=(64*1024*1024) +CONFIG_LPC31XX_EXTSRAM0=n +CONFIG_LPC31XX_EXTSRAM0HEAP=n +CONFIG_LPC31XX_EXTSRAM0SIZE=(128*1024) +CONFIG_LPC31XX_EXTSRAM1=n +CONFIG_LPC31XX_EXTSRAM1HEAP=n +CONFIG_LPC31XX_EXTSRAM1SIZE=(128*1024) +CONFIG_LPC31XX_EXTSDRAM=n +CONFIG_LPC31XX_EXTSDRAMHEAP=n +CONFIG_LPC31XX_EXTSDRAMSIZE=(64*1024*1024) +CONFIG_LPC31XX_EXTNAND=n +CONFIG_LPC31XX_EXTNANDSIZE=(64*1024*1024) # -# LPC313X specific device driver settings +# LPC31XX specific device driver settings # # CONFIG_UART_SERIAL_CONSOLE - selects the UART for the # console and ttys0 @@ -535,20 +535,20 @@ CONFIG_USBDEV_TRACE=n CONFIG_USBDEV_TRACE_NRECORDS=128 # -# LPC313X USB Configuration +# LPC31XX USB Configuration # -# CONFIG_LPC313X_GIO_USBATTACH +# CONFIG_LPC31XX_GIO_USBATTACH # GIO that detects USB attach/detach events -# CONFIG_LPC313X_GIO_USBDPPULLUP +# CONFIG_LPC31XX_GIO_USBDPPULLUP # GIO # CONFIG_DMA320_USBDEV_DMA -# Enable LPC313X-specific DMA support +# Enable LPC31XX-specific DMA support # -CONFIG_LPC313X_GIO_USBATTACH=6 -CONFIG_LPC313X_GIO_USBDPPULLUP=17 -CONFIG_LPC313X_VENDORID=0xd320 -CONFIG_LPC313X_PRODUCTID=0x3211 -CONFIG_LPC313X_USBDEV_DMA=n +CONFIG_LPC31XX_GIO_USBATTACH=6 +CONFIG_LPC31XX_GIO_USBDPPULLUP=17 +CONFIG_LPC31XX_VENDORID=0xd320 +CONFIG_LPC31XX_PRODUCTID=0x3211 +CONFIG_LPC31XX_USBDEV_DMA=n # # USB Serial Device Configuration diff --git a/nuttx/configs/ea3131/nsh/ld.script b/nuttx/configs/ea3131/nsh/ld.script index 1d57baed0..8c3b2db45 100755 --- a/nuttx/configs/ea3131/nsh/ld.script +++ b/nuttx/configs/ea3131/nsh/ld.script @@ -34,7 +34,7 @@ ****************************************************************************/ /* The LPC3131 has 192Kb of ISRAM beginning at virtual address 0x1102:8000. - * LPC313x boot ROM expects the boot image be compiled with entry point at + * LPC31xx boot ROM expects the boot image be compiled with entry point at * 0x1102:9000. A 128b header will appear at this address (applied by * lpc313xImgCreator) and the executable code must begin at 0x1102:9080. */ diff --git a/nuttx/configs/ea3131/ostest/Make.defs b/nuttx/configs/ea3131/ostest/Make.defs index 25cb28b70..fd72ded9d 100755 --- a/nuttx/configs/ea3131/ostest/Make.defs +++ b/nuttx/configs/ea3131/ostest/Make.defs @@ -37,23 +37,23 @@ include ${TOPDIR}/.config # Setup for the selected toolchain -ifeq ($(CONFIG_LPC313X_CODESOURCERYW),y) +ifeq ($(CONFIG_LPC31XX_CODESOURCERYW),y) # CodeSourcery under Windows CROSSDEV = arm-none-eabi- WINTOOL = y MAXOPTIMIZATION = -O2 endif -ifeq ($(CONFIG_LPC313X_CODESOURCERYL),y) +ifeq ($(CONFIG_LPC31XX_CODESOURCERYL),y) # CodeSourcery under Linux CROSSDEV = arm-none-eabi- MAXOPTIMIZATION = -O2 endif -ifeq ($(CONFIG_LPC313X_DEVKITARM),y) +ifeq ($(CONFIG_LPC31XX_DEVKITARM),y) # devkitARM under Windows CROSSDEV = arm-eabi- WINTOOL = y endif -ifeq ($(CONFIG_LPC313X_BUILDROOT),y) +ifeq ($(CONFIG_LPC31XX_BUILDROOT),y) # NuttX buildroot under Linux or Cygwin CROSSDEV = arm-elf- MAXOPTIMIZATION = -Os @@ -121,7 +121,7 @@ OBJEXT = .o LIBEXT = .a EXEEXT = -ifneq ($(CONFIG_LPC313X_BUILDROOT),y) +ifneq ($(CONFIG_LPC31XX_BUILDROOT),y) LDFLAGS += -nostartfiles -nodefaultlibs endif ifeq ($(CONFIG_DEBUG_SYMBOLS),y) diff --git a/nuttx/configs/ea3131/ostest/defconfig b/nuttx/configs/ea3131/ostest/defconfig index f085980ba..0027aa242 100755 --- a/nuttx/configs/ea3131/ostest/defconfig +++ b/nuttx/configs/ea3131/ostest/defconfig @@ -50,13 +50,13 @@ # CONFIG_ENDIAN_BIG - define if big endian (default is little endian) # CONFIG_BOARD_LOOPSPERMSEC - for delay loops # CONFIG_DRAM_SIZE - For most ARM9 architectures, this describes the -# size of installed DRAM. For the LPC313X, it is used only to +# size of installed DRAM. For the LPC31XX, it is used only to # deterimine how to map the executable regions. It is SDRAM size # only if you are executing out of the external SDRAM; or it could # be NOR FLASH size, external SRAM size, or internal SRAM size. # CONFIG_DRAM_START - The start address of DRAM (physical) # CONFIG_DRAM_VSTART - The startaddress of DRAM (virtual) -# CONFIG_ARCH_IRQPRIO - The LPC313x supports interrupt prioritization +# CONFIG_ARCH_IRQPRIO - The LPC31xx supports interrupt prioritization # CONFIG_ARCH_INTERRUPTSTACK - This architecture supports an interrupt # stack. If defined, this symbol is the size of the interrupt # stack in bytes. If not defined, the user task stacks will be @@ -76,7 +76,7 @@ CONFIG_ARCH=arm CONFIG_ARCH_ARM=y CONFIG_ARCH_ARM926EJS=y -CONFIG_ARCH_CHIP=lpc313x +CONFIG_ARCH_CHIP=lpc31xx CONFIG_ARCH_CHIP_LPC3131=y CONFIG_ARCH_BOARD=ea3131 CONFIG_ARCH_BOARD_EA3131=y @@ -108,54 +108,54 @@ CONFIG_ARCH_ROMPGTABLE=y # Identify toolchain and linker options # -CONFIG_LPC313X_CODESOURCERYW=n -CONFIG_LPC313X_CODESOURCERYL=n -CONFIG_LPC313X_DEVKITARM=n -CONFIG_LPC313X_BUILDROOT=y +CONFIG_LPC31XX_CODESOURCERYW=n +CONFIG_LPC31XX_CODESOURCERYL=n +CONFIG_LPC31XX_DEVKITARM=n +CONFIG_LPC31XX_BUILDROOT=y # # Individual subsystems can be enabled: # -CONFIG_LPC313X_MCI=n -CONFIG_LPC313X_SPI=n -CONFIG_LPC313X_UART=y +CONFIG_LPC31XX_MCI=n +CONFIG_LPC31XX_SPI=n +CONFIG_LPC31XX_UART=y # # Exernal memory available on the board (see also CONFIG_MM_REGIONS) # -# CONFIG_LPC313X_EXTSRAM0 - Select if external SRAM0 is present -# CONFIG_LPC313X_EXTSRAM0HEAP - Select if external SRAM0 should be +# CONFIG_LPC31XX_EXTSRAM0 - Select if external SRAM0 is present +# CONFIG_LPC31XX_EXTSRAM0HEAP - Select if external SRAM0 should be # configured as part of the NuttX heap. -# CONFIG_LPC313X_EXTSRAM0SIZE - Size (in bytes) of the installed +# CONFIG_LPC31XX_EXTSRAM0SIZE - Size (in bytes) of the installed # external SRAM0 memory -# CONFIG_LPC313X_EXTSRAM1 - Select if external SRAM1 is present -# CONFIG_LPC313X_EXTSRAM1HEAP - Select if external SRAM1 should be +# CONFIG_LPC31XX_EXTSRAM1 - Select if external SRAM1 is present +# CONFIG_LPC31XX_EXTSRAM1HEAP - Select if external SRAM1 should be # configured as part of the NuttX heap. -# CONFIG_LPC313X_EXTSRAM1SIZE - Size (in bytes) of the installed +# CONFIG_LPC31XX_EXTSRAM1SIZE - Size (in bytes) of the installed # external SRAM1 memory -# CONFIG_LPC313X_EXTSDRAM - Select if external SDRAM is present -# CONFIG_LPC313X_EXTSDRAMHEAP - Select if external SDRAM should be +# CONFIG_LPC31XX_EXTSDRAM - Select if external SDRAM is present +# CONFIG_LPC31XX_EXTSDRAMHEAP - Select if external SDRAM should be # configured as part of the NuttX heap. -# CONFIG_LPC313X_EXTSDRAMSIZE - Size (in bytes) of the installed +# CONFIG_LPC31XX_EXTSDRAMSIZE - Size (in bytes) of the installed # external SDRAM memory -# CONFIG_LPC313X_EXTNAND - Select if external NAND is present -# CONFIG_LPC313X_EXTSDRAMSIZE - Size (in bytes) of the installed +# CONFIG_LPC31XX_EXTNAND - Select if external NAND is present +# CONFIG_LPC31XX_EXTSDRAMSIZE - Size (in bytes) of the installed # external NAND memory # -CONFIG_LPC313X_EXTSRAM0=n -CONFIG_LPC313X_EXTSRAM0HEAP=n -CONFIG_LPC313X_EXTSRAM0SIZE=(128*1024) -CONFIG_LPC313X_EXTSRAM1=n -CONFIG_LPC313X_EXTSRAM1HEAP=n -CONFIG_LPC313X_EXTSRAM1SIZE=(128*1024) -CONFIG_LPC313X_EXTSDRAM=n -CONFIG_LPC313X_EXTSDRAMHEAP=n -CONFIG_LPC313X_EXTSDRAMSIZE=(64*1024*1024) -CONFIG_LPC313X_EXTNAND=n -CONFIG_LPC313X_EXTNANDSIZE=(64*1024*1024) +CONFIG_LPC31XX_EXTSRAM0=n +CONFIG_LPC31XX_EXTSRAM0HEAP=n +CONFIG_LPC31XX_EXTSRAM0SIZE=(128*1024) +CONFIG_LPC31XX_EXTSRAM1=n +CONFIG_LPC31XX_EXTSRAM1HEAP=n +CONFIG_LPC31XX_EXTSRAM1SIZE=(128*1024) +CONFIG_LPC31XX_EXTSDRAM=n +CONFIG_LPC31XX_EXTSDRAMHEAP=n +CONFIG_LPC31XX_EXTSDRAMSIZE=(64*1024*1024) +CONFIG_LPC31XX_EXTNAND=n +CONFIG_LPC31XX_EXTNANDSIZE=(64*1024*1024) # -# LPC313X specific device driver settings +# LPC31XX specific device driver settings # # CONFIG_UART_SERIAL_CONSOLE - selects the UART for the # console and ttys0 @@ -535,20 +535,20 @@ CONFIG_USBDEV_TRACE=n CONFIG_USBDEV_TRACE_NRECORDS=128 # -# LPC313X USB Configuration +# LPC31XX USB Configuration # -# CONFIG_LPC313X_GIO_USBATTACH +# CONFIG_LPC31XX_GIO_USBATTACH # GIO that detects USB attach/detach events -# CONFIG_LPC313X_GIO_USBDPPULLUP +# CONFIG_LPC31XX_GIO_USBDPPULLUP # GIO # CONFIG_DMA320_USBDEV_DMA -# Enable LPC313X-specific DMA support +# Enable LPC31XX-specific DMA support # -CONFIG_LPC313X_GIO_USBATTACH=6 -CONFIG_LPC313X_GIO_USBDPPULLUP=17 -CONFIG_LPC313X_VENDORID=0xd320 -CONFIG_LPC313X_PRODUCTID=0x3211 -CONFIG_LPC313X_USBDEV_DMA=n +CONFIG_LPC31XX_GIO_USBATTACH=6 +CONFIG_LPC31XX_GIO_USBDPPULLUP=17 +CONFIG_LPC31XX_VENDORID=0xd320 +CONFIG_LPC31XX_PRODUCTID=0x3211 +CONFIG_LPC31XX_USBDEV_DMA=n # # USB Serial Device Configuration diff --git a/nuttx/configs/ea3131/ostest/ld.script b/nuttx/configs/ea3131/ostest/ld.script index 1e1f0ff39..531e64ce9 100755 --- a/nuttx/configs/ea3131/ostest/ld.script +++ b/nuttx/configs/ea3131/ostest/ld.script @@ -34,7 +34,7 @@ ****************************************************************************/ /* The LPC3131 has 192Kb of ISRAM beginning at virtual address 0x1102:8000. - * LPC313x boot ROM expects the boot image be compiled with entry point at + * LPC31xx boot ROM expects the boot image be compiled with entry point at * 0x1102:9000. A 128b header will appear at this address (applied by * lpc313xImgCreator) and the executable code must begin at 0x1102:9080. */ diff --git a/nuttx/configs/ea3131/pgnsh/Make.defs b/nuttx/configs/ea3131/pgnsh/Make.defs index f19d54bbd..81edc73fa 100755 --- a/nuttx/configs/ea3131/pgnsh/Make.defs +++ b/nuttx/configs/ea3131/pgnsh/Make.defs @@ -37,23 +37,23 @@ include ${TOPDIR}/.config # Setup for the selected toolchain -ifeq ($(CONFIG_LPC313X_CODESOURCERYW),y) +ifeq ($(CONFIG_LPC31XX_CODESOURCERYW),y) # CodeSourcery under Windows CROSSDEV = arm-none-eabi- WINTOOL = y MAXOPTIMIZATION = -O2 endif -ifeq ($(CONFIG_LPC313X_CODESOURCERYL),y) +ifeq ($(CONFIG_LPC31XX_CODESOURCERYL),y) # CodeSourcery under Linux CROSSDEV = arm-none-eabi- MAXOPTIMIZATION = -O2 endif -ifeq ($(CONFIG_LPC313X_DEVKITARM),y) +ifeq ($(CONFIG_LPC31XX_DEVKITARM),y) # devkitARM under Windows CROSSDEV = arm-eabi- WINTOOL = y endif -ifeq ($(CONFIG_LPC313X_BUILDROOT),y) +ifeq ($(CONFIG_LPC31XX_BUILDROOT),y) # NuttX buildroot under Linux or Cygwin CROSSDEV = arm-elf- MAXOPTIMIZATION = -Os @@ -121,7 +121,7 @@ OBJEXT = .o LIBEXT = .a EXEEXT = -ifneq ($(CONFIG_LPC313X_BUILDROOT),y) +ifneq ($(CONFIG_LPC31XX_BUILDROOT),y) LDFLAGS += -nostartfiles -nodefaultlibs endif ifeq ($(CONFIG_DEBUG_SYMBOLS),y) diff --git a/nuttx/configs/ea3131/pgnsh/defconfig b/nuttx/configs/ea3131/pgnsh/defconfig index e24897d24..252a64c09 100755 --- a/nuttx/configs/ea3131/pgnsh/defconfig +++ b/nuttx/configs/ea3131/pgnsh/defconfig @@ -50,13 +50,13 @@ # CONFIG_ENDIAN_BIG - define if big endian (default is little endian) # CONFIG_BOARD_LOOPSPERMSEC - for delay loops # CONFIG_DRAM_SIZE - For most ARM9 architectures, this describes the -# size of installed DRAM. For the LPC313X, it is used only to +# size of installed DRAM. For the LPC31XX, it is used only to # deterimine how to map the executable regions. It is SDRAM size # only if you are executing out of the external SDRAM; or it could # be NOR FLASH size, external SRAM size, or internal SRAM size. # CONFIG_DRAM_START - The start address of DRAM (physical) # CONFIG_DRAM_VSTART - The startaddress of DRAM (virtual) -# CONFIG_ARCH_IRQPRIO - The LPC313x supports interrupt prioritization +# CONFIG_ARCH_IRQPRIO - The LPC31xx supports interrupt prioritization # CONFIG_ARCH_INTERRUPTSTACK - This architecture supports an interrupt # stack. If defined, this symbol is the size of the interrupt # stack in bytes. If not defined, the user task stacks will be @@ -76,7 +76,7 @@ CONFIG_ARCH=arm CONFIG_ARCH_ARM=y CONFIG_ARCH_ARM926EJS=y -CONFIG_ARCH_CHIP=lpc313x +CONFIG_ARCH_CHIP=lpc31xx CONFIG_ARCH_CHIP_LPC3131=y CONFIG_ARCH_BOARD=ea3131 CONFIG_ARCH_BOARD_EA3131=y @@ -108,54 +108,54 @@ CONFIG_ARCH_ROMPGTABLE=n # Identify toolchain and linker options # -CONFIG_LPC313X_CODESOURCERYW=n -CONFIG_LPC313X_CODESOURCERYL=n -CONFIG_LPC313X_DEVKITARM=n -CONFIG_LPC313X_BUILDROOT=y +CONFIG_LPC31XX_CODESOURCERYW=n +CONFIG_LPC31XX_CODESOURCERYL=n +CONFIG_LPC31XX_DEVKITARM=n +CONFIG_LPC31XX_BUILDROOT=y # # Individual subsystems can be enabled: # -CONFIG_LPC313X_MCI=n -CONFIG_LPC313X_SPI=y -CONFIG_LPC313X_UART=y +CONFIG_LPC31XX_MCI=n +CONFIG_LPC31XX_SPI=y +CONFIG_LPC31XX_UART=y # # Exernal memory available on the board (see also CONFIG_MM_REGIONS) # -# CONFIG_LPC313X_EXTSRAM0 - Select if external SRAM0 is present -# CONFIG_LPC313X_EXTSRAM0HEAP - Select if external SRAM0 should be +# CONFIG_LPC31XX_EXTSRAM0 - Select if external SRAM0 is present +# CONFIG_LPC31XX_EXTSRAM0HEAP - Select if external SRAM0 should be # configured as part of the NuttX heap. -# CONFIG_LPC313X_EXTSRAM0SIZE - Size (in bytes) of the installed +# CONFIG_LPC31XX_EXTSRAM0SIZE - Size (in bytes) of the installed # external SRAM0 memory -# CONFIG_LPC313X_EXTSRAM1 - Select if external SRAM1 is present -# CONFIG_LPC313X_EXTSRAM1HEAP - Select if external SRAM1 should be +# CONFIG_LPC31XX_EXTSRAM1 - Select if external SRAM1 is present +# CONFIG_LPC31XX_EXTSRAM1HEAP - Select if external SRAM1 should be # configured as part of the NuttX heap. -# CONFIG_LPC313X_EXTSRAM1SIZE - Size (in bytes) of the installed +# CONFIG_LPC31XX_EXTSRAM1SIZE - Size (in bytes) of the installed # external SRAM1 memory -# CONFIG_LPC313X_EXTSDRAM - Select if external SDRAM is present -# CONFIG_LPC313X_EXTSDRAMHEAP - Select if external SDRAM should be +# CONFIG_LPC31XX_EXTSDRAM - Select if external SDRAM is present +# CONFIG_LPC31XX_EXTSDRAMHEAP - Select if external SDRAM should be # configured as part of the NuttX heap. -# CONFIG_LPC313X_EXTSDRAMSIZE - Size (in bytes) of the installed +# CONFIG_LPC31XX_EXTSDRAMSIZE - Size (in bytes) of the installed # external SDRAM memory -# CONFIG_LPC313X_EXTNAND - Select if external NAND is present -# CONFIG_LPC313X_EXTSDRAMSIZE - Size (in bytes) of the installed +# CONFIG_LPC31XX_EXTNAND - Select if external NAND is present +# CONFIG_LPC31XX_EXTSDRAMSIZE - Size (in bytes) of the installed # external NAND memory # -CONFIG_LPC313X_EXTSRAM0=n -CONFIG_LPC313X_EXTSRAM0HEAP=n -CONFIG_LPC313X_EXTSRAM0SIZE=(128*1024) -CONFIG_LPC313X_EXTSRAM1=n -CONFIG_LPC313X_EXTSRAM1HEAP=n -CONFIG_LPC313X_EXTSRAM1SIZE=(128*1024) -CONFIG_LPC313X_EXTSDRAM=n -CONFIG_LPC313X_EXTSDRAMHEAP=n -CONFIG_LPC313X_EXTSDRAMSIZE=(64*1024*1024) -CONFIG_LPC313X_EXTNAND=n -CONFIG_LPC313X_EXTNANDSIZE=(64*1024*1024) +CONFIG_LPC31XX_EXTSRAM0=n +CONFIG_LPC31XX_EXTSRAM0HEAP=n +CONFIG_LPC31XX_EXTSRAM0SIZE=(128*1024) +CONFIG_LPC31XX_EXTSRAM1=n +CONFIG_LPC31XX_EXTSRAM1HEAP=n +CONFIG_LPC31XX_EXTSRAM1SIZE=(128*1024) +CONFIG_LPC31XX_EXTSDRAM=n +CONFIG_LPC31XX_EXTSDRAMHEAP=n +CONFIG_LPC31XX_EXTSDRAMSIZE=(64*1024*1024) +CONFIG_LPC31XX_EXTNAND=n +CONFIG_LPC31XX_EXTNANDSIZE=(64*1024*1024) # -# LPC313X specific device driver settings +# LPC31XX specific device driver settings # # CONFIG_UART_SERIAL_CONSOLE - selects the UART for the # console and ttys0 @@ -681,20 +681,20 @@ CONFIG_USBDEV_TRACE=n CONFIG_USBDEV_TRACE_NRECORDS=128 # -# LPC313X USB Configuration +# LPC31XX USB Configuration # -# CONFIG_LPC313X_GIO_USBATTACH +# CONFIG_LPC31XX_GIO_USBATTACH # GIO that detects USB attach/detach events -# CONFIG_LPC313X_GIO_USBDPPULLUP +# CONFIG_LPC31XX_GIO_USBDPPULLUP # GIO # CONFIG_DMA320_USBDEV_DMA -# Enable LPC313X-specific DMA support +# Enable LPC31XX-specific DMA support # -CONFIG_LPC313X_GIO_USBATTACH=6 -CONFIG_LPC313X_GIO_USBDPPULLUP=17 -CONFIG_LPC313X_VENDORID=0xd320 -CONFIG_LPC313X_PRODUCTID=0x3211 -CONFIG_LPC313X_USBDEV_DMA=n +CONFIG_LPC31XX_GIO_USBATTACH=6 +CONFIG_LPC31XX_GIO_USBDPPULLUP=17 +CONFIG_LPC31XX_VENDORID=0xd320 +CONFIG_LPC31XX_PRODUCTID=0x3211 +CONFIG_LPC31XX_USBDEV_DMA=n # # USB Serial Device Configuration diff --git a/nuttx/configs/ea3131/pgnsh/ld.script b/nuttx/configs/ea3131/pgnsh/ld.script index eb77ecaff..c4c597567 100755 --- a/nuttx/configs/ea3131/pgnsh/ld.script +++ b/nuttx/configs/ea3131/pgnsh/ld.script @@ -34,7 +34,7 @@ ****************************************************************************/ /* The LPC3131 has 192Kb of ISRAM beginning at virtual address 0x1102:8000. - * LPC313x boot ROM expects the boot image be compiled with entry point at + * LPC31xx boot ROM expects the boot image be compiled with entry point at * 0x1102:9000. A 128b header will appear at this address (applied by * lpc313xImgCreator) and the executable code must begin at 0x1102:9080. * diff --git a/nuttx/configs/ea3131/src/Makefile b/nuttx/configs/ea3131/src/Makefile index c97c4fecf..6e62138d6 100755 --- a/nuttx/configs/ea3131/src/Makefile +++ b/nuttx/configs/ea3131/src/Makefile @@ -44,13 +44,13 @@ CSRCS = up_boot.c up_clkinit.c ifeq ($(CONFIG_ARCH_BUTTONS),y) CSRCS += up_buttons.c endif -ifeq ($(CONFIG_LPC313X_EXTSDRAM),y) +ifeq ($(CONFIG_LPC31XX_EXTSDRAM),y) CSRCS += up_mem.c endif ifeq ($(CONFIG_ARCH_LEDS),y) CSRCS += up_leds.c endif -ifeq ($(CONFIG_LPC313X_SPI),y) +ifeq ($(CONFIG_LPC31XX_SPI),y) CSRCS += up_spi.c endif ifeq ($(CONFIG_NSH_ARCHINIT),y) diff --git a/nuttx/configs/ea3131/src/ea3131_internal.h b/nuttx/configs/ea3131/src/ea3131_internal.h index 0f28ea1cc..ca2a5b570 100755 --- a/nuttx/configs/ea3131/src/ea3131_internal.h +++ b/nuttx/configs/ea3131/src/ea3131_internal.h @@ -1,127 +1,127 @@ -/************************************************************************************
- * configs/ea3131/src/ea3131_internal.h
- * arch/arm/src/board/ea3131_internal.n
- *
- * Copyright (C) 2009-2010 Gregory Nutt. All rights reserved.
- * Author: Gregory Nutt <spudmonkey@racsa.co.cr>
- *
- * Redistribution and use in source and binary forms, with or without
- * modification, are permitted provided that the following conditions
- * are met:
- *
- * 1. Redistributions of source code must retain the above copyright
- * notice, this list of conditions and the following disclaimer.
- * 2. Redistributions in binary form must reproduce the above copyright
- * notice, this list of conditions and the following disclaimer in
- * the documentation and/or other materials provided with the
- * distribution.
- * 3. Neither the name NuttX nor the names of its contributors may be
- * used to endorse or promote products derived from this software
- * without specific prior written permission.
- *
- * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
- * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
- * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
- * FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE
- * COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
- * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING,
- * BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS
- * OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED
- * AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
- * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
- * ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
- * POSSIBILITY OF SUCH DAMAGE.
- *
- ************************************************************************************/
-
-#ifndef __CONFIGS_EA3131_SRC_EA3131_INTERNAL_H
-#define __CONFIGS_EA3131_SRC_EA3131_INTERNAL_H
-
-/************************************************************************************
- * Included Files
- ************************************************************************************/
-
-#include <nuttx/config.h>
-#include <nuttx/compiler.h>
-#include <stdint.h>
-
-#include "lpc313x_ioconfig.h"
-
-/************************************************************************************
- * Definitions
- ************************************************************************************/
-
-/* EA3131L GPIOs ********************************************************************/
-
-/* LEDs -- interface through an I2C GPIO expander */
-
-/* BUTTONS -- NOTE that some have EXTI interrupts configured */
-
-/* SPI Chip Selects */
-/* SPI NOR flash is the only device on SPI. SPI_CS_OUT0 is its chip select */
-
-#define SPINOR_CS IOCONFIG_SPI_CSOUT0
-
-/* USB Soft Connect Pullup -- NONE */
-
-/************************************************************************************
- * Public Types
- ************************************************************************************/
-
-/************************************************************************************
- * Public data
- ************************************************************************************/
-
-#ifndef __ASSEMBLY__
-
-/************************************************************************************
- * Public Functions
- ************************************************************************************/
-
-/************************************************************************************
- * Name: lpc313x_meminitialize
- *
- * Description:
- * Initialize external memory resources (sram, sdram, nand, nor, etc.)
- *
- ************************************************************************************/
-
-#ifdef CONFIG_LPC313X_EXTSDRAM
-extern void lpc313x_meminitialize(void);
-#endif
-
-/************************************************************************************
- * Name: lpc313x_spiinitialize
- *
- * Description:
- * Called to configure SPI chip select GPIO pins for the EA3131 board.
- *
- ************************************************************************************/
-
-extern void weak_function lpc313x_spiinitialize(void);
-
-/************************************************************************************
- * Name: lpc313x_usbinitialize
- *
- * Description:
- * Called to setup USB-related GPIO pins for the EA3131 board.
- *
- ************************************************************************************/
-
-extern void weak_function lpc313x_usbinitialize(void);
-
-/************************************************************************************
- * Name: lpc313x_pginitialize
- *
- * Description:
- * Set up mass storage device to support on demand paging.
- *
- ************************************************************************************/
-
-#ifdef CONFIG_PAGING
-extern void weak_function lpc313x_pginitialize(void);
-#endif
-
-#endif /* __ASSEMBLY__ */
-#endif /* __CONFIGS_EA3131_SRC_EA3131_INTERNAL_H */
-
+/************************************************************************************ + * configs/ea3131/src/ea3131_internal.h + * arch/arm/src/board/ea3131_internal.n + * + * Copyright (C) 2009-2010 Gregory Nutt. All rights reserved. + * Author: Gregory Nutt <spudmonkey@racsa.co.cr> + * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions + * are met: + * + * 1. Redistributions of source code must retain the above copyright + * notice, this list of conditions and the following disclaimer. + * 2. Redistributions in binary form must reproduce the above copyright + * notice, this list of conditions and the following disclaimer in + * the documentation and/or other materials provided with the + * distribution. + * 3. Neither the name NuttX nor the names of its contributors may be + * used to endorse or promote products derived from this software + * without specific prior written permission. + * + * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS + * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT + * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS + * FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE + * COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, + * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, + * BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS + * OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED + * AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT + * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN + * ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE + * POSSIBILITY OF SUCH DAMAGE. + * + ************************************************************************************/ + +#ifndef __CONFIGS_EA3131_SRC_EA3131_INTERNAL_H +#define __CONFIGS_EA3131_SRC_EA3131_INTERNAL_H + +/************************************************************************************ + * Included Files + ************************************************************************************/ + +#include <nuttx/config.h> +#include <nuttx/compiler.h> +#include <stdint.h> + +#include "lpc31_ioconfig.h" + +/************************************************************************************ + * Definitions + ************************************************************************************/ + +/* EA3131L GPIOs ********************************************************************/ + +/* LEDs -- interface through an I2C GPIO expander */ + +/* BUTTONS -- NOTE that some have EXTI interrupts configured */ + +/* SPI Chip Selects */ +/* SPI NOR flash is the only device on SPI. SPI_CS_OUT0 is its chip select */ + +#define SPINOR_CS IOCONFIG_SPI_CSOUT0 + +/* USB Soft Connect Pullup -- NONE */ + +/************************************************************************************ + * Public Types + ************************************************************************************/ + +/************************************************************************************ + * Public data + ************************************************************************************/ + +#ifndef __ASSEMBLY__ + +/************************************************************************************ + * Public Functions + ************************************************************************************/ + +/************************************************************************************ + * Name: lpc31_meminitialize + * + * Description: + * Initialize external memory resources (sram, sdram, nand, nor, etc.) + * + ************************************************************************************/ + +#ifdef CONFIG_LPC31XX_EXTSDRAM +extern void lpc31_meminitialize(void); +#endif + +/************************************************************************************ + * Name: lpc31_spiinitialize + * + * Description: + * Called to configure SPI chip select GPIO pins for the EA3131 board. + * + ************************************************************************************/ + +extern void weak_function lpc31_spiinitialize(void); + +/************************************************************************************ + * Name: lpc31_usbinitialize + * + * Description: + * Called to setup USB-related GPIO pins for the EA3131 board. + * + ************************************************************************************/ + +extern void weak_function lpc31_usbinitialize(void); + +/************************************************************************************ + * Name: lpc31_pginitialize + * + * Description: + * Set up mass storage device to support on demand paging. + * + ************************************************************************************/ + +#ifdef CONFIG_PAGING +extern void weak_function lpc31_pginitialize(void); +#endif + +#endif /* __ASSEMBLY__ */ +#endif /* __CONFIGS_EA3131_SRC_EA3131_INTERNAL_H */ + diff --git a/nuttx/configs/ea3131/src/up_boot.c b/nuttx/configs/ea3131/src/up_boot.c index 59ed9e778..94c4d8a9c 100755 --- a/nuttx/configs/ea3131/src/up_boot.c +++ b/nuttx/configs/ea3131/src/up_boot.c @@ -1,119 +1,119 @@ -/************************************************************************************
- * configs/ea3131/src/up_boot.c
- * arch/arm/src/board/up_boot.c
- *
- * Copyright (C) 2009 Gregory Nutt. All rights reserved.
- * Author: Gregory Nutt <spudmonkey@racsa.co.cr>
- *
- * Redistribution and use in source and binary forms, with or without
- * modification, are permitted provided that the following conditions
- * are met:
- *
- * 1. Redistributions of source code must retain the above copyright
- * notice, this list of conditions and the following disclaimer.
- * 2. Redistributions in binary form must reproduce the above copyright
- * notice, this list of conditions and the following disclaimer in
- * the documentation and/or other materials provided with the
- * distribution.
- * 3. Neither the name NuttX nor the names of its contributors may be
- * used to endorse or promote products derived from this software
- * without specific prior written permission.
- *
- * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
- * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
- * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
- * FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE
- * COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
- * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING,
- * BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS
- * OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED
- * AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
- * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
- * ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
- * POSSIBILITY OF SUCH DAMAGE.
- *
- ************************************************************************************/
-
-/************************************************************************************
- * Included Files
- ************************************************************************************/
-
-#include <nuttx/config.h>
-
-#include <debug.h>
-
-#include <arch/board/board.h>
-
-#include "up_arch.h"
-#include "up_internal.h"
-#include "lpc313x_internal.h"
-#include "ea3131_internal.h"
-
-/************************************************************************************
- * Definitions
- ************************************************************************************/
-
-/************************************************************************************
- * Private Functions
- ************************************************************************************/
-
-/************************************************************************************
- * Public Functions
- ************************************************************************************/
-
-/************************************************************************************
- * Name: lpc313x_boardinitialize
- *
- * Description:
- * All LPC313X architectures must provide the following entry point. This entry
- * point is called early in the intitialization -- after all memory has been
- * configured and mapped but before any devices have been initialized.
- *
- ************************************************************************************/
-
-void lpc313x_boardinitialize(void)
-{
- /* Initialize configured, external memory resources */
-
-#ifdef CONFIG_LPC313X_EXTSDRAM
- lpc313x_meminitialize();
-#endif
-
- /* Configure SPI chip selects if 1) SPI is not disabled, and 2) the weak function
- * lpc313x_spiinitialize() has been brought into the link.
- */
-
-#if defined(CONFIG_LPC313X_SPI)
- if (lpc313x_spiinitialize)
- {
- lpc313x_spiinitialize();
- }
-#endif
-
- /* Initialize USB is 1) USBDEV is selected, 2) the USB controller is not
- * disabled, and 3) the weak function lpc313x_usbinitialize() has been brought
- * into the build.
- */
-
-#if defined(CONFIG_USBDEV) && defined(CONFIG_LPC313X_USB)
- if (lpc313x_usbinitialize)
- {
- lpc313x_usbinitialize();
- }
-#endif
-
- /* Configure on-board LEDs if LED support has been selected. */
-
-#ifdef CONFIG_ARCH_LEDS
- up_ledinit();
-#endif
-
- /* Set up mass storage device to support on demand paging */
-
-#if defined(CONFIG_PAGING)
- if (lpc313x_pginitialize)
- {
- lpc313x_pginitialize();
- }
-#endif
-}
+/************************************************************************************ + * configs/ea3131/src/up_boot.c + * arch/arm/src/board/up_boot.c + * + * Copyright (C) 2009 Gregory Nutt. All rights reserved. + * Author: Gregory Nutt <spudmonkey@racsa.co.cr> + * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions + * are met: + * + * 1. Redistributions of source code must retain the above copyright + * notice, this list of conditions and the following disclaimer. + * 2. Redistributions in binary form must reproduce the above copyright + * notice, this list of conditions and the following disclaimer in + * the documentation and/or other materials provided with the + * distribution. + * 3. Neither the name NuttX nor the names of its contributors may be + * used to endorse or promote products derived from this software + * without specific prior written permission. + * + * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS + * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT + * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS + * FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE + * COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, + * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, + * BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS + * OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED + * AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT + * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN + * ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE + * POSSIBILITY OF SUCH DAMAGE. + * + ************************************************************************************/ + +/************************************************************************************ + * Included Files + ************************************************************************************/ + +#include <nuttx/config.h> + +#include <debug.h> + +#include <arch/board/board.h> + +#include "up_arch.h" +#include "up_internal.h" +#include "lpc31_internal.h" +#include "ea3131_internal.h" + +/************************************************************************************ + * Definitions + ************************************************************************************/ + +/************************************************************************************ + * Private Functions + ************************************************************************************/ + +/************************************************************************************ + * Public Functions + ************************************************************************************/ + +/************************************************************************************ + * Name: lpc31_boardinitialize + * + * Description: + * All LPC31XX architectures must provide the following entry point. This entry + * point is called early in the intitialization -- after all memory has been + * configured and mapped but before any devices have been initialized. + * + ************************************************************************************/ + +void lpc31_boardinitialize(void) +{ + /* Initialize configured, external memory resources */ + +#ifdef CONFIG_LPC31XX_EXTSDRAM + lpc31_meminitialize(); +#endif + + /* Configure SPI chip selects if 1) SPI is not disabled, and 2) the weak function + * lpc31_spiinitialize() has been brought into the link. + */ + +#if defined(CONFIG_LPC31XX_SPI) + if (lpc31_spiinitialize) + { + lpc31_spiinitialize(); + } +#endif + + /* Initialize USB is 1) USBDEV is selected, 2) the USB controller is not + * disabled, and 3) the weak function lpc31_usbinitialize() has been brought + * into the build. + */ + +#if defined(CONFIG_USBDEV) && defined(CONFIG_LPC31XX_USB) + if (lpc31_usbinitialize) + { + lpc31_usbinitialize(); + } +#endif + + /* Configure on-board LEDs if LED support has been selected. */ + +#ifdef CONFIG_ARCH_LEDS + up_ledinit(); +#endif + + /* Set up mass storage device to support on demand paging */ + +#if defined(CONFIG_PAGING) + if (lpc31_pginitialize) + { + lpc31_pginitialize(); + } +#endif +} diff --git a/nuttx/configs/ea3131/src/up_clkinit.c b/nuttx/configs/ea3131/src/up_clkinit.c index 8277e633b..a0eba9c75 100755 --- a/nuttx/configs/ea3131/src/up_clkinit.c +++ b/nuttx/configs/ea3131/src/up_clkinit.c @@ -44,8 +44,8 @@ #include <nuttx/config.h> -#include "lpc313x_cgu.h" -#include "lpc313x_cgudrvr.h" +#include "lpc31_cgu.h" +#include "lpc31_cgudrvr.h" /**************************************************************************** * Definitions @@ -284,7 +284,7 @@ * 11 - DOMAIN_SYSCLKO FFAST - - */ -const struct lpc313x_clkinit_s g_boardclks = +const struct lpc31_clkinit_s g_boardclks = { /* Domain 0 (DOMAINID_SYS), Clocks 0 - 29, Fraction dividers 0-6 */ diff --git a/nuttx/configs/ea3131/src/up_fillpage.c b/nuttx/configs/ea3131/src/up_fillpage.c index 2d3412bef..531675aa0 100755 --- a/nuttx/configs/ea3131/src/up_fillpage.c +++ b/nuttx/configs/ea3131/src/up_fillpage.c @@ -58,7 +58,7 @@ # include <sys/mount.h> # include <nuttx/sdio.h> # include <nuttx/mmcsd.h> -# include "lpc313x_internal.h" +# include "lpc31_internal.h" # endif #endif @@ -85,8 +85,8 @@ # undef CONFIG_PAGING_SDSLOT # endif #else - /* Add configuration for new LPC313X boards here */ -# error "Unrecognized LPC313X board" + /* Add configuration for new LPC31XX boards here */ +# error "Unrecognized LPC31XX board" # undef CONFIG_PAGING_SDSLOT # undef HAVE_SD # undef HAVE_SPINOR @@ -122,7 +122,7 @@ * is not enabled. */ -# if defined(CONFIG_DISABLE_MOUNTPOINT) || !defined(CONFIG_LPC313X_MCI) +# if defined(CONFIG_DISABLE_MOUNTPOINT) || !defined(CONFIG_LPC31XX_MCI) # ifdef CONFIG_PAGING_SDSLOT # error "Mountpoints and/or MCI disabled" # endif @@ -152,7 +152,7 @@ /* Verify that SPI support is enabld */ -#ifndef CONFIG_LPC313X_SPI +#ifndef CONFIG_LPC31XX_SPI # error "SPI support is not enabled" #endif @@ -219,7 +219,7 @@ static struct pg_source_s g_pgsrc; ****************************************************************************/ /**************************************************************************** - * Name: lpc313x_initsrc() + * Name: lpc31_initsrc() * * Description: * Initialize the source device that will support paging. @@ -230,7 +230,7 @@ static struct pg_source_s g_pgsrc; ****************************************************************************/ #if defined(CONFIG_PAGING_BINPATH) -static inline void lpc313x_initsrc(void) +static inline void lpc31_initsrc(void) { #ifdef CONFIG_PAGING_SDSLOT FAR struct sdio_dev_s *sdio; @@ -287,7 +287,7 @@ static inline void lpc313x_initsrc(void) } #elif defined(CONFIG_PAGING_M25PX) || defined(CONFIG_PAGING_AT45DB) -static inline void lpc313x_initsrc(void) +static inline void lpc31_initsrc(void) { FAR struct spi_dev_s *spi; #ifdef CONFIG_DEBUG @@ -339,7 +339,7 @@ static inline void lpc313x_initsrc(void) } #else -# define lpc313x_initsrc() +# define lpc31_initsrc() #endif /**************************************************************************** @@ -425,7 +425,7 @@ int up_fillpage(FAR _TCB *tcb, FAR void *vpage) /* Perform initialization of the paging source device (if necessary) */ - lpc313x_initsrc(); + lpc31_initsrc(); /* Create an offset into the binary image that corresponds to the * virtual address. File offset 0 corresponds to PG_LOCKED_VBASE. @@ -448,7 +448,7 @@ int up_fillpage(FAR _TCB *tcb, FAR void *vpage) /* Perform initialization of the paging source device (if necessary) */ - lpc313x_initsrc(); + lpc31_initsrc(); /* Create an offset into the binary image that corresponds to the * virtual address. File offset 0 corresponds to PG_LOCKED_VBASE. @@ -493,21 +493,21 @@ int up_fillpage(FAR _TCB *tcb, FAR void *vpage, up_pgcallback_t pg_callback) #endif /* CONFIG_PAGING_BLOCKINGFILL */ /************************************************************************************ - * Name: lpc313x_pginitialize + * Name: lpc31_pginitialize * * Description: * Set up mass storage device to support on demand paging. * ************************************************************************************/ -void weak_function lpc313x_pginitialize(void) +void weak_function lpc31_pginitialize(void) { /* This initialization does nothing in this example setup. But this function is * where you might, for example: * * - Initialize and configure a mass storage device to support on-demand paging. * This might be, perhaps an SD card or NAND memory. An SPI FLASH would probably - * already have been configured by lpc313x_spiinitialize(void); + * already have been configured by lpc31_spiinitialize(void); * - Set up resources to support up_fillpage() operation. For example, perhaps the * the text image is stored in a named binary file. In this case, the virtual * text addresses might map to offsets into that file. diff --git a/nuttx/configs/ea3131/src/up_leds.c b/nuttx/configs/ea3131/src/up_leds.c index 43a9847db..a0bec01b0 100755 --- a/nuttx/configs/ea3131/src/up_leds.c +++ b/nuttx/configs/ea3131/src/up_leds.c @@ -49,7 +49,7 @@ #include "chip.h" #include "up_arch.h" #include "up_internal.h" -#include "lpc313x_internal.h" +#include "lpc31_internal.h" /**************************************************************************** * Definitions diff --git a/nuttx/configs/ea3131/src/up_mem.c b/nuttx/configs/ea3131/src/up_mem.c index 956e3ee75..1559468ac 100755 --- a/nuttx/configs/ea3131/src/up_mem.c +++ b/nuttx/configs/ea3131/src/up_mem.c @@ -54,12 +54,12 @@ #include "chip.h" #include "up_arch.h" -#include "lpc313x_syscreg.h" -#include "lpc313x_cgudrvr.h" -#include "lpc313x_mpmc.h" +#include "lpc31_syscreg.h" +#include "lpc31_cgudrvr.h" +#include "lpc31_mpmc.h" #include "ea3131_internal.h" -#ifdef CONFIG_LPC313X_EXTSDRAM +#ifdef CONFIG_LPC31XX_EXTSDRAM /**************************************************************************** * Pre-processor Definitions @@ -103,7 +103,7 @@ ****************************************************************************/ /**************************************************************************** - * Name: lpc313x_sdraminitialize + * Name: lpc31_sdraminitialize * * Description: * Configure SDRAM on the EA3131 board @@ -155,7 +155,7 @@ * ****************************************************************************/ -static void lpc313x_sdraminitialize(void) +static void lpc31_sdraminitialize(void) { uint32_t tmp; uint32_t regval; @@ -164,10 +164,10 @@ static void lpc313x_sdraminitialize(void) * replaced with an apriori value. */ -#ifdef CONFIG_LPC313X_SDRAMHCLK -# define HCLK CONFIG_LPC313X_SDRAMHCLK +#ifdef CONFIG_LPC31XX_SDRAMHCLK +# define HCLK CONFIG_LPC31XX_SDRAMHCLK #else - uint32_t hclk = lpc313x_clkfreq(CLKID_MPMCCFGCLK2, DOMAINID_SYS); + uint32_t hclk = lpc31_clkfreq(CLKID_MPMCCFGCLK2, DOMAINID_SYS); # define HCLK hclk #endif @@ -175,7 +175,7 @@ static void lpc313x_sdraminitialize(void) #if 0 uint32_t hclk2 = hclk; - if (((getreg32(LPC313X_MPMC_CONFIG) & MPMC_CONFIG_CLK)) != 0) + if (((getreg32(LPC31_MPMC_CONFIG) & MPMC_CONFIG_CLK)) != 0) { hclk2 >>= 1; } @@ -187,45 +187,45 @@ static void lpc313x_sdraminitialize(void) /* Set command delay startergy */ - putreg32(MPMC_DYNREADCONFIG_CMDDEL, LPC313X_MPMC_DYNREADCONFIG); + putreg32(MPMC_DYNREADCONFIG_CMDDEL, LPC31_MPMC_DYNREADCONFIG); /* Configure device config register nSDCE0 for proper width SDRAM */ putreg32((MPMC_DYNCONFIG0_MDSDRAM|MPMC_DYNCONFIG_HP16_32MX16), - LPC313X_MPMC_DYNCONFIG0); + LPC31_MPMC_DYNCONFIG0); putreg32((MPMC_DYNRASCAS0_RAS2CLK|MPMC_DYNRASCAS0_CAS2CLK), - LPC313X_MPMC_DYNRASCAS0); + LPC31_MPMC_DYNRASCAS0); /* Min 20ns program 1 so that at least 2 HCLKs are used */ putreg32(NS2HCLKS(EA3131_SDRAM_TRP, HCLK2, MPMC_DYNTRP_MASK), - LPC313X_MPMC_DYNTRP); + LPC31_MPMC_DYNTRP); putreg32(NS2HCLKS(EA3131_SDRAM_TRAS, HCLK2, MPMC_DYNTRAS_MASK), - LPC313X_MPMC_DYNTRAS); + LPC31_MPMC_DYNTRAS); putreg32(NS2HCLKS(EA3131_SDRAM_TREX, HCLK2, MPMC_DYNTSREX_MASK), - LPC313X_MPMC_DYNTSREX); + LPC31_MPMC_DYNTSREX); putreg32(EA3131_SDRAM_TARP, - LPC313X_MPMC_DYNTAPR); + LPC31_MPMC_DYNTAPR); putreg32(NS2HCLKS(EA3131_SDRAM_TDAL, HCLK2, MPMC_DYNTDAL_MASK), - LPC313X_MPMC_DYNTDAL); + LPC31_MPMC_DYNTDAL); putreg32(NS2HCLKS(EA3131_SDRAM_TWR, HCLK2, MPMC_DYNTWR_MASK), - LPC313X_MPMC_DYNTWR); + LPC31_MPMC_DYNTWR); putreg32(NS2HCLKS(EA3131_SDRAM_TRC, HCLK2, MPMC_DYNTRC_MASK), - LPC313X_MPMC_DYNTRC); + LPC31_MPMC_DYNTRC); putreg32(NS2HCLKS(EA3131_SDRAM_TRFC, HCLK2, MPMC_DYNTRFC_MASK), - LPC313X_MPMC_DYNTRFC); + LPC31_MPMC_DYNTRFC); putreg32(NS2HCLKS(EA3131_SDRAM_TXSR, HCLK2, MPMC_DYNTXSR_MASK), - LPC313X_MPMC_DYNTXSR); + LPC31_MPMC_DYNTXSR); putreg32(NS2HCLKS(EA3131_SDRAM_TRRD, HCLK2, MPMC_DYNTRRD_MASK), - LPC313X_MPMC_DYNTRRD); + LPC31_MPMC_DYNTRRD); putreg32(NS2HCLKS(EA3131_SDRAM_TMRD, HCLK2, MPMC_DYNTMRD_MASK), - LPC313X_MPMC_DYNTMRD); + LPC31_MPMC_DYNTMRD); up_udelay(100); /* Issue continuous NOP commands */ putreg32((MPMC_DYNCONTROL_CE|MPMC_DYNCONTROL_CS|MPMC_DYNCONTROL_INOP), - LPC313X_MPMC_DYNCONTROL); + LPC31_MPMC_DYNCONTROL); /* Load ~200us delay value to timer1 */ @@ -234,14 +234,14 @@ static void lpc313x_sdraminitialize(void) /* Issue a "pre-charge all" command */ putreg32((MPMC_DYNCONTROL_CE|MPMC_DYNCONTROL_CS|MPMC_DYNCONTROL_IPALL), - LPC313X_MPMC_DYNCONTROL); + LPC31_MPMC_DYNCONTROL); /* Minimum refresh pulse interval (tRFC) for MT48LC32M16A2=80nsec, * 100nsec provides more than adequate interval. */ putreg32(NS2HCLKS(EA3131_SDRAM_REFRESH, HCLK, MPMC_DYNREFRESH_TIMER_MASK), - LPC313X_MPMC_DYNREFRESH); + LPC31_MPMC_DYNREFRESH); /* Load ~250us delay value to timer1 */ @@ -253,12 +253,12 @@ static void lpc313x_sdraminitialize(void) */ putreg32(NS2HCLKS(EA3131_SDRAM_OPERREFRESH, HCLK, MPMC_DYNREFRESH_TIMER_MASK), - LPC313X_MPMC_DYNREFRESH); + LPC31_MPMC_DYNREFRESH); /* Select mode register update mode */ putreg32((MPMC_DYNCONTROL_CE|MPMC_DYNCONTROL_CS|MPMC_DYNCONTROL_IMODE), - LPC313X_MPMC_DYNCONTROL); + LPC31_MPMC_DYNCONTROL); /* Program the SDRAM internal mode registers on bank nSDCE0 and reconfigure * the SDRAM chips. Bus speeds up to 90MHz requires use of a CAS latency = 2. @@ -266,26 +266,26 @@ static void lpc313x_sdraminitialize(void) * 16bit mode */ - tmp = getreg32(LPC313X_EXTSDRAM0_VSECTION | (0x23 << 13)); + tmp = getreg32(LPC31_EXTSDRAM0_VSECTION | (0x23 << 13)); putreg32((MPMC_DYNCONFIG0_MDSDRAM|MPMC_DYNCONFIG_HP16_32MX16), - LPC313X_MPMC_DYNCONFIG0); + LPC31_MPMC_DYNCONFIG0); putreg32((MPMC_DYNRASCAS0_RAS2CLK|MPMC_DYNRASCAS0_CAS2CLK), - LPC313X_MPMC_DYNRASCAS0); + LPC31_MPMC_DYNRASCAS0); /* Select normal operating mode */ putreg32((MPMC_DYNCONTROL_CE|MPMC_DYNCONTROL_CS|MPMC_DYNCONTROL_INORMAL), - LPC313X_MPMC_DYNCONTROL); + LPC31_MPMC_DYNCONTROL); /* Enable buffers */ - regval = getreg32(LPC313X_MPMC_DYNCONFIG0); + regval = getreg32(LPC31_MPMC_DYNCONFIG0); regval |= MPMC_DYNCONFIG0_B; - putreg32(regval, LPC313X_MPMC_DYNCONFIG0); + putreg32(regval, LPC31_MPMC_DYNCONFIG0); putreg32((MPMC_DYNCONTROL_INORMAL|MPMC_DYNCONTROL_CS), - LPC313X_MPMC_DYNCONTROL); + LPC31_MPMC_DYNCONTROL); } /**************************************************************************** @@ -293,14 +293,14 @@ static void lpc313x_sdraminitialize(void) ****************************************************************************/ /**************************************************************************** - * Name: lpc313x_meminitialize + * Name: lpc31_meminitialize * * Description: * Initialize external memory resources (sram, sdram, nand, nor, etc.) * ****************************************************************************/ -void lpc313x_meminitialize(void) +void lpc31_meminitialize(void) { /* Configure the LCD pins in external bus interface (EBI/MPMC) memory mode. * @@ -326,34 +326,34 @@ void lpc313x_meminitialize(void) * LCD_DB_15 -> EBI_A_15 */ - putreg32(SYSCREG_MUX_LCDEBISEL_EBIMPMC, LPC313X_SYSCREG_MUX_LCDEBISEL); + putreg32(SYSCREG_MUX_LCDEBISEL_EBIMPMC, LPC31_SYSCREG_MUX_LCDEBISEL); /* Enable EBI clock */ - lpc313x_enableclock(CLKID_EBICLK); + lpc31_enableclock(CLKID_EBICLK); /* Enable MPMC controller clocks */ - lpc313x_enableclock(CLKID_MPMCCFGCLK); - lpc313x_enableclock(CLKID_MPMCCFGCLK2); - lpc313x_enableclock(CLKID_MPMCCFGCLK3); + lpc31_enableclock(CLKID_MPMCCFGCLK); + lpc31_enableclock(CLKID_MPMCCFGCLK2); + lpc31_enableclock(CLKID_MPMCCFGCLK3); /* Enable the external memory controller */ - putreg32(MPMC_CONTROL_E, LPC313X_MPMC_CONTROL); + putreg32(MPMC_CONTROL_E, LPC31_MPMC_CONTROL); /* Force HCLK to MPMC_CLK to 1:1 ratio, little-endian mode */ - putreg32(0, LPC313X_MPMC_CONFIG); + putreg32(0, LPC31_MPMC_CONFIG); /* Set MPMC delay based on trace lengths between SDRAM and the chip * and on the delay strategy used for SDRAM. */ - putreg32(EA3131_MPMC_DELAY, LPC313X_SYSCREG_MPMC_DELAYMODES); + putreg32(EA3131_MPMC_DELAY, LPC31_SYSCREG_MPMC_DELAYMODES); /* Configure Micron MT48LC32M16A2 SDRAM on the EA3131 board */ - lpc313x_sdraminitialize(); + lpc31_sdraminitialize(); } -#endif /* CONFIG_LPC313X_EXTSDRAM */ +#endif /* CONFIG_LPC31XX_EXTSDRAM */ diff --git a/nuttx/configs/ea3131/src/up_nsh.c b/nuttx/configs/ea3131/src/up_nsh.c index c0848c9f1..c8dbf017b 100755 --- a/nuttx/configs/ea3131/src/up_nsh.c +++ b/nuttx/configs/ea3131/src/up_nsh.c @@ -45,12 +45,12 @@ #include <debug.h> #include <errno.h> -#ifdef CONFIG_LPC313X_MCI +#ifdef CONFIG_LPC31XX_MCI # include <nuttx/sdio.h> # include <nuttx/mmcsd.h> #endif -#include "lpc313x_internal.h" +#include "lpc31_internal.h" /**************************************************************************** * Pre-Processor Definitions @@ -71,8 +71,9 @@ # define CONFIG_NSH_MMCSDSLOTNO 0 # endif #else - /* Add configuration for new LPC313X boards here */ -# error "Unrecognized LPC313X board" + /* Add configuration for new LPC31XX boards here */ + +# error "Unrecognized LPC31XX board" # undef CONFIG_NSH_HAVEUSBDEV # undef CONFIG_NSH_HAVEMMCSD #endif @@ -87,7 +88,7 @@ * is not enabled. */ -#if defined(CONFIG_DISABLE_MOUNTPOINT) || !defined(CONFIG_LPC313X_MCI) +#if defined(CONFIG_DISABLE_MOUNTPOINT) || !defined(CONFIG_LPC31XX_MCI) # undef CONFIG_NSH_HAVEMMCSD #endif diff --git a/nuttx/configs/ea3131/src/up_spi.c b/nuttx/configs/ea3131/src/up_spi.c index c2df60a48..7755e55b4 100755 --- a/nuttx/configs/ea3131/src/up_spi.c +++ b/nuttx/configs/ea3131/src/up_spi.c @@ -2,7 +2,7 @@ * configs/ea3131/src/up_spi.c * arch/arm/src/board/up_spi.c * - * Copyright (C) 2009-2010 Gregory Nutt. All rights reserved. + * Copyright (C) 2009-2011 Gregory Nutt. All rights reserved. * Author: Gregory Nutt <spudmonkey@racsa.co.cr> * * Redistribution and use in source and binary forms, with or without @@ -49,12 +49,12 @@ #include "up_arch.h" #include "chip.h" -#include "lpc313x_internal.h" +#include "lpc31_internal.h" #include "ea3131_internal.h" -#ifdef CONFIG_LPC313X_SPI -#if 0 /* At present, EA3131 specific logic is hard-coded in the file lpc313x_spi.c - * in arch/arm/src/lpc313x */ +#ifdef CONFIG_LPC31XX_SPI +#if 0 /* At present, EA3131 specific logic is hard-coded in the file lpc31_spi.c + * in arch/arm/src/lpc31xx */ /************************************************************************************ * Definitions @@ -87,14 +87,14 @@ ************************************************************************************/ /************************************************************************************ - * Name: lpc313x_spiinitialize + * Name: lpc31_spiinitialize * * Description: * Called to configure SPI chip select GPIO pins for the EA3131 board. * ************************************************************************************/ -void weak_function lpc313x_spiinitialize(void) +void weak_function lpc31_spiinitialize(void) { /* NOTE: Clocking for SPI has already been provided. Pin configuration is performed * on-the-fly, so no additional setup is required. @@ -102,19 +102,19 @@ void weak_function lpc313x_spiinitialize(void) } /************************************************************************************ - * Name: lpc313x_spiselect and lpc313x_spistatus + * Name: lpc31_spiselect and lpc31_spistatus * * Description: - * The external functions, lpc313x_spiselect and lpc313x_spistatus must be + * The external functions, lpc31_spiselect and lpc31_spistatus must be * provided by board-specific logic. They are implementations of the select * and status methods of the SPI interface defined by struct spi_ops_s (see * include/nuttx/spi.h). All other methods (including up_spiinitialize()) - * are provided by common LPC313X logic. To use this common SPI logic on your + * are provided by common LPC31XX logic. To use this common SPI logic on your * board: * - * 1. Provide logic in lpc313x_boardinitialize() to configure SPI chip select + * 1. Provide logic in lpc31_boardinitialize() to configure SPI chip select * pins. - * 2. Provide lpc313x_spiselect() and lpc313x_spistatus() functions in your + * 2. Provide lpc31_spiselect() and lpc31_spistatus() functions in your * board-specific logic. These functions will perform chip selection and * status operations using GPIOs in the way your board is configured. * 3. Add a calls to up_spiinitialize() in your low level application @@ -126,17 +126,17 @@ void weak_function lpc313x_spiinitialize(void) * ************************************************************************************/ -void lpc313x_spiselect(FAR struct spi_dev_s *dev, enum spi_dev_e devid, bool selected) +void lpc31_spiselect(FAR struct spi_dev_s *dev, enum spi_dev_e devid, bool selected) { spidbg("devid: %d CS: %s\n", (int)devid, selected ? "assert" : "de-assert"); #warning "Missing logic" } -uint8_t lpc313x_spistatus(FAR struct spi_dev_s *dev, enum spi_dev_e devid) +uint8_t lpc31_spistatus(FAR struct spi_dev_s *dev, enum spi_dev_e devid) { return SPI_STATUS_PRESENT; } #endif /* 0 */ -#endif /* CONFIG_LPC313X_SPI */ +#endif /* CONFIG_LPC31XX_SPI */ diff --git a/nuttx/configs/ea3131/tools/armusbocd.cfg b/nuttx/configs/ea3131/tools/armusbocd.cfg index de17e8b0e..733e3768c 100755 --- a/nuttx/configs/ea3131/tools/armusbocd.cfg +++ b/nuttx/configs/ea3131/tools/armusbocd.cfg @@ -1,34 +1,34 @@ -#daemon configuration
-telnet_port 4444
-gdb_port 3333
-
-#interface
-interface ft2232
-ft2232_device_desc "Olimex OpenOCD JTAG A"
-ft2232_layout "olimex-jtag"
-ft2232_vid_pid 0x15BA 0x0003
-jtag_speed 2
-
-#use combined on interfaces or targets that can't set TRST/SRST separately
-reset_config trst_and_srst separate
-
-#jtag scan chain
-#format L IRC IRCM IDCODE (Length, IR Capture, IR Capture Mask, IDCODE)
-jtag_device 4 0x1 0xf 0xe
-
-#target configuration
-daemon_startup reset
-
-#target <type> <startup mode>
-#target arm9ejs <reset mode> <chainpos> <endianness> <variant>
-target arm926ejs little run_and_halt 0 arm926ejs
-run_and_halt_time 0 30
-
-#target_script 0 reset oocd_flash2138.script
-working_area 0 0x1102800 0x60000 nobackup
-
-#flash configuration
-#flash bank lpc2000 0x0 0x40000 0 0 0 lpc2000_v2 12000 calc_checksum
-
-# For more information about the configuration files, take a look at:
-# http://openfacts.berlios.de/index-en.phtml?title=Open+On-Chip+Debugger
+#daemon configuration +telnet_port 4444 +gdb_port 3333 + +#interface +interface ft2232 +ft2232_device_desc "Olimex OpenOCD JTAG A" +ft2232_layout "olimex-jtag" +ft2232_vid_pid 0x15BA 0x0003 +jtag_speed 2 + +#use combined on interfaces or targets that can't set TRST/SRST separately +reset_config trst_and_srst separate + +#jtag scan chain +#format L IRC IRCM IDCODE (Length, IR Capture, IR Capture Mask, IDCODE) +jtag_device 4 0x1 0xf 0xe + +#target configuration +daemon_startup reset + +#target <type> <startup mode> +#target arm9ejs <reset mode> <chainpos> <endianness> <variant> +target arm926ejs little run_and_halt 0 arm926ejs +run_and_halt_time 0 30 + +#target_script 0 reset oocd_flash2138.script +working_area 0 0x1102800 0x60000 nobackup + +#flash configuration +#flash bank lpc2000 0x0 0x40000 0 0 0 lpc2000_v2 12000 calc_checksum + +# For more information about the configuration files, take a look at: +# http://openfacts.berlios.de/index-en.phtml?title=Open+On-Chip+Debugger diff --git a/nuttx/configs/ea3131/tools/lpchdr.c b/nuttx/configs/ea3131/tools/lpchdr.c index 99b820bb0..9325c8813 100755 --- a/nuttx/configs/ea3131/tools/lpchdr.c +++ b/nuttx/configs/ea3131/tools/lpchdr.c @@ -1,297 +1,297 @@ -/************************************************************************************
- * configs/ea3131/tools/lpchdr.c
- *
- * Copyright (C) 2010 Gregory Nutt. All rights reserved.
- * Author: Gregory Nutt <spudmonkey@racsa.co.cr>
- *
- * Redistribution and use in source and binary forms, with or without
- * modification, are permitted provided that the following conditions
- * are met:
- *
- * 1. Redistributions of source code must retain the above copyright
- * notice, this list of conditions and the following disclaimer.
- * 2. Redistributions in binary form must reproduce the above copyright
- * notice, this list of conditions and the following disclaimer in
- * the documentation and/or other materials provided with the
- * distribution.
- * 3. Neither the name NuttX nor the names of its contributors may be
- * used to endorse or promote products derived from this software
- * without specific prior written permission.
- *
- * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
- * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
- * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
- * FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE
- * COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
- * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING,
- * BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS
- * OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED
- * AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
- * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
- * ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
- * POSSIBILITY OF SUCH DAMAGE.
- *
- ************************************************************************************/
-
-/************************************************************************************
- * Included Files
- ************************************************************************************/
-
-#include <sys/types.h>
-#include <sys/stat.h>
-#include <stdio.h>
-#include <stdlib.h>
-#include <unistd.h>
-#include <stdint.h>
-#include <string.h>
-#include <fcntl.h>
-#include <errno.h>
-#include "lpchdr.h"
-
-/************************************************************************************
- * Pre-processor Definitions
- ************************************************************************************/
-
-#define IO_BUF_SIZE 1024
-#define HDR_SIZE 0x80
-#define HDR_CRC_SIZE 0x6c
-
-/************************************************************************************
- * Private Data
- ************************************************************************************/
-
-static const char *g_infile;
-static const char *g_outfile;
-
-/************************************************************************************
- * Private Functions
- ************************************************************************************/
-
-static void show_usage(const char *progname, int exitcode)
-{
- fprintf(stderr, "%s -o <outfile> <infile>\n", progname);
- exit(exitcode);
-}
-
-static void parse_args(int argc, char **argv)
-{
- int ch;
-
- while ((ch = getopt(argc, argv, ":o:")) >= 0)
- {
- switch (ch)
- {
- case 'o':
- g_outfile = optarg;
- break;
-
- case ':':
- fprintf(stderr, "Missing option argumen\n");
- show_usage(argv[0], 1);
-
- case '?':
- default:
- fprintf(stderr, "Unrecognized option\n");
- show_usage(argv[0], 1);
- }
- }
-
- if (optind >= argc)
- {
- fprintf(stderr, "Missing binary input file name\n");
- show_usage(argv[0], 1);
- }
-
- g_infile = argv[optind];
- optind++;
-
- if (optind < argc)
- {
- fprintf(stderr, "Garbage at the end of the command line\n");
- show_usage(argv[0], 1);
- }
-}
-
-static inline uint32_t infilecrc32(int infd, size_t len, size_t padlen)
-{
- off_t offset;
- uint8_t buffer[IO_BUF_SIZE];
- ssize_t nbytes;
- size_t bytesread;
- uint32_t crc;
-
- offset = lseek(infd, 0, SEEK_SET);
- if (offset == (off_t)-1)
- {
- fprintf(stderr, "lseek failed: %s\n", strerror(errno));
- exit(4);
- }
-
- crc = 0;
- for (bytesread = 0; bytesread < len; bytesread += nbytes)
- {
- nbytes = read(infd, buffer, IO_BUF_SIZE);
- if (nbytes < 0)
- {
- fprintf(stderr, "read failed: %s\n", strerror(errno));
- exit(4);
- }
- else if (nbytes == 0)
- {
- fprintf(stderr, "Unexpected end-of-file: %s\n", strerror(errno));
- exit(4);
- }
- else
- {
- crc = crc32part(buffer, nbytes, crc);
- }
- }
-
- /* Add the zero-padding at the end of the binary in the CRC */
-
- memset(buffer, 0, IO_BUF_SIZE);
- return crc32part(buffer, padlen, crc);
-}
-
-static inline void writefile(int infd, int outfd, size_t len, size_t padlen)
-{
- off_t offset;
- uint8_t buffer[IO_BUF_SIZE];
- ssize_t nbytesread;
- ssize_t nbyteswritten;
- size_t totalread;
-
- offset = lseek(infd, 0, SEEK_SET);
- if (offset == (off_t)-1)
- {
- fprintf(stderr, "lseek failed: %s\n", strerror(errno));
- exit(4);
- }
-
- for (totalread = 0; totalread < len; totalread += nbytesread)
- {
- nbytesread = read(infd, buffer, IO_BUF_SIZE);
- if (nbytesread < 0)
- {
- fprintf(stderr, "read failed: %s\n", strerror(errno));
- exit(4);
- }
- else if (nbytesread == 0)
- {
- fprintf(stderr, "Unexpected end-of-file: %s\n", strerror(errno));
- exit(4);
- }
- else
- {
- nbyteswritten = write(outfd, buffer, nbytesread);
- if (nbyteswritten < 0)
- {
- fprintf(stderr, "write failed: %s\n", strerror(errno));
- exit(4);
- }
- else if (nbyteswritten != nbytesread)
- {
- fprintf(stderr, "Short writes not handled\n");
- exit(4);
- }
- }
- }
-
- /* Write the zero-padding at the end of the binary */
-
- memset(buffer, 0, IO_BUF_SIZE);
- nbyteswritten = write(outfd, buffer, padlen);
- if (nbyteswritten < 0)
- {
- fprintf(stderr, "write failed: %s\n", strerror(errno));
- exit(4);
- }
- else if (nbyteswritten != padlen)
- {
- fprintf(stderr, "Short writes not handled\n");
- exit(4);
- }
-}
-
-/************************************************************************************
- * Public Functions
- ************************************************************************************/
-
-int main(int argc, char **argv, char **envp)
-{
- struct lpc313x_header_s g_hdr;
- struct stat buf;
- ssize_t nbytes;
- size_t padlen;
- int infd;
- int outfd;
- int ret;
-
- /* Parse arguments */
-
- parse_args(argc, argv);
-
- /* Open files */
-
- infd = open(g_infile, O_RDONLY);
- if (infd < 0)
- {
- fprintf(stderr, "Failed to open %s for reading: %s\n", g_infile, strerror(errno));
- exit(2);
- }
-
- outfd = open(g_outfile, O_WRONLY|O_CREAT|O_TRUNC, 0644);
- if (outfd < 0)
- {
- fprintf(stderr, "Failed to open %s for writing: %s\n", g_outfile, strerror(errno));
- exit(2);
- }
-
- /* Get the size of the binary file */
-
- ret = fstat(infd, &buf);
- if (ret < 0)
- {
- fprintf(stderr, "stat of %s failed: %s\n", g_infile, strerror(errno));
- exit(3);
- }
-
- /* Initialize the header */
-
- memset(&g_hdr, 0, sizeof(struct lpc313x_header_s));
- g_hdr.vector = 0xea00001e; /* b 0x11029080 */
- g_hdr.magic = 0x41676d69;
-#if 1 /* CRC doesn't seem to be functional */
- g_hdr.imageType = 0x0000000a;
-#else
- g_hdr.imageType = 0x0000000b;
-#endif
- g_hdr.imageLength = (buf.st_size + sizeof(struct lpc313x_header_s) + 511) & ~0x1ff;
-
- /* This is how much we must pad at the end of the binary image. */
-
- padlen = g_hdr.imageLength - buf.st_size;
-
- /* Calculate CRCs */
-
- g_hdr.execution_crc32 = infilecrc32(infd, buf.st_size, padlen);
- g_hdr.header_crc32 = crc32((const uint8_t*)&g_hdr, HDR_CRC_SIZE);
-
- /* Write the header */
-
- nbytes = write(outfd, &g_hdr, HDR_SIZE);
- if (nbytes != 0x80)
- {
- fprintf(stderr, "write of header to of %s failed: %s\n", g_outfile, strerror(errno));
- exit(4);
- }
-
- /* Copy the input file to the output */
-
- writefile(infd, outfd, buf.st_size, padlen);
- close(infd);
- close(outfd);
- return 0;
-}
-
-
+/************************************************************************************ + * configs/ea3131/tools/lpchdr.c + * + * Copyright (C) 2010-2011 Gregory Nutt. All rights reserved. + * Author: Gregory Nutt <spudmonkey@racsa.co.cr> + * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions + * are met: + * + * 1. Redistributions of source code must retain the above copyright + * notice, this list of conditions and the following disclaimer. + * 2. Redistributions in binary form must reproduce the above copyright + * notice, this list of conditions and the following disclaimer in + * the documentation and/or other materials provided with the + * distribution. + * 3. Neither the name NuttX nor the names of its contributors may be + * used to endorse or promote products derived from this software + * without specific prior written permission. + * + * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS + * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT + * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS + * FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE + * COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, + * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, + * BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS + * OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED + * AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT + * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN + * ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE + * POSSIBILITY OF SUCH DAMAGE. + * + ************************************************************************************/ + +/************************************************************************************ + * Included Files + ************************************************************************************/ + +#include <sys/types.h> +#include <sys/stat.h> +#include <stdio.h> +#include <stdlib.h> +#include <unistd.h> +#include <stdint.h> +#include <string.h> +#include <fcntl.h> +#include <errno.h> +#include "lpchdr.h" + +/************************************************************************************ + * Pre-processor Definitions + ************************************************************************************/ + +#define IO_BUF_SIZE 1024 +#define HDR_SIZE 0x80 +#define HDR_CRC_SIZE 0x6c + +/************************************************************************************ + * Private Data + ************************************************************************************/ + +static const char *g_infile; +static const char *g_outfile; + +/************************************************************************************ + * Private Functions + ************************************************************************************/ + +static void show_usage(const char *progname, int exitcode) +{ + fprintf(stderr, "%s -o <outfile> <infile>\n", progname); + exit(exitcode); +} + +static void parse_args(int argc, char **argv) +{ + int ch; + + while ((ch = getopt(argc, argv, ":o:")) >= 0) + { + switch (ch) + { + case 'o': + g_outfile = optarg; + break; + + case ':': + fprintf(stderr, "Missing option argumen\n"); + show_usage(argv[0], 1); + + case '?': + default: + fprintf(stderr, "Unrecognized option\n"); + show_usage(argv[0], 1); + } + } + + if (optind >= argc) + { + fprintf(stderr, "Missing binary input file name\n"); + show_usage(argv[0], 1); + } + + g_infile = argv[optind]; + optind++; + + if (optind < argc) + { + fprintf(stderr, "Garbage at the end of the command line\n"); + show_usage(argv[0], 1); + } +} + +static inline uint32_t infilecrc32(int infd, size_t len, size_t padlen) +{ + off_t offset; + uint8_t buffer[IO_BUF_SIZE]; + ssize_t nbytes; + size_t bytesread; + uint32_t crc; + + offset = lseek(infd, 0, SEEK_SET); + if (offset == (off_t)-1) + { + fprintf(stderr, "lseek failed: %s\n", strerror(errno)); + exit(4); + } + + crc = 0; + for (bytesread = 0; bytesread < len; bytesread += nbytes) + { + nbytes = read(infd, buffer, IO_BUF_SIZE); + if (nbytes < 0) + { + fprintf(stderr, "read failed: %s\n", strerror(errno)); + exit(4); + } + else if (nbytes == 0) + { + fprintf(stderr, "Unexpected end-of-file: %s\n", strerror(errno)); + exit(4); + } + else + { + crc = crc32part(buffer, nbytes, crc); + } + } + + /* Add the zero-padding at the end of the binary in the CRC */ + + memset(buffer, 0, IO_BUF_SIZE); + return crc32part(buffer, padlen, crc); +} + +static inline void writefile(int infd, int outfd, size_t len, size_t padlen) +{ + off_t offset; + uint8_t buffer[IO_BUF_SIZE]; + ssize_t nbytesread; + ssize_t nbyteswritten; + size_t totalread; + + offset = lseek(infd, 0, SEEK_SET); + if (offset == (off_t)-1) + { + fprintf(stderr, "lseek failed: %s\n", strerror(errno)); + exit(4); + } + + for (totalread = 0; totalread < len; totalread += nbytesread) + { + nbytesread = read(infd, buffer, IO_BUF_SIZE); + if (nbytesread < 0) + { + fprintf(stderr, "read failed: %s\n", strerror(errno)); + exit(4); + } + else if (nbytesread == 0) + { + fprintf(stderr, "Unexpected end-of-file: %s\n", strerror(errno)); + exit(4); + } + else + { + nbyteswritten = write(outfd, buffer, nbytesread); + if (nbyteswritten < 0) + { + fprintf(stderr, "write failed: %s\n", strerror(errno)); + exit(4); + } + else if (nbyteswritten != nbytesread) + { + fprintf(stderr, "Short writes not handled\n"); + exit(4); + } + } + } + + /* Write the zero-padding at the end of the binary */ + + memset(buffer, 0, IO_BUF_SIZE); + nbyteswritten = write(outfd, buffer, padlen); + if (nbyteswritten < 0) + { + fprintf(stderr, "write failed: %s\n", strerror(errno)); + exit(4); + } + else if (nbyteswritten != padlen) + { + fprintf(stderr, "Short writes not handled\n"); + exit(4); + } +} + +/************************************************************************************ + * Public Functions + ************************************************************************************/ + +int main(int argc, char **argv, char **envp) +{ + struct lpc31_header_s g_hdr; + struct stat buf; + ssize_t nbytes; + size_t padlen; + int infd; + int outfd; + int ret; + + /* Parse arguments */ + + parse_args(argc, argv); + + /* Open files */ + + infd = open(g_infile, O_RDONLY); + if (infd < 0) + { + fprintf(stderr, "Failed to open %s for reading: %s\n", g_infile, strerror(errno)); + exit(2); + } + + outfd = open(g_outfile, O_WRONLY|O_CREAT|O_TRUNC, 0644); + if (outfd < 0) + { + fprintf(stderr, "Failed to open %s for writing: %s\n", g_outfile, strerror(errno)); + exit(2); + } + + /* Get the size of the binary file */ + + ret = fstat(infd, &buf); + if (ret < 0) + { + fprintf(stderr, "stat of %s failed: %s\n", g_infile, strerror(errno)); + exit(3); + } + + /* Initialize the header */ + + memset(&g_hdr, 0, sizeof(struct lpc31_header_s)); + g_hdr.vector = 0xea00001e; /* b 0x11029080 */ + g_hdr.magic = 0x41676d69; +#if 1 /* CRC doesn't seem to be functional */ + g_hdr.imageType = 0x0000000a; +#else + g_hdr.imageType = 0x0000000b; +#endif + g_hdr.imageLength = (buf.st_size + sizeof(struct lpc31_header_s) + 511) & ~0x1ff; + + /* This is how much we must pad at the end of the binary image. */ + + padlen = g_hdr.imageLength - buf.st_size; + + /* Calculate CRCs */ + + g_hdr.execution_crc32 = infilecrc32(infd, buf.st_size, padlen); + g_hdr.header_crc32 = crc32((const uint8_t*)&g_hdr, HDR_CRC_SIZE); + + /* Write the header */ + + nbytes = write(outfd, &g_hdr, HDR_SIZE); + if (nbytes != 0x80) + { + fprintf(stderr, "write of header to of %s failed: %s\n", g_outfile, strerror(errno)); + exit(4); + } + + /* Copy the input file to the output */ + + writefile(infd, outfd, buf.st_size, padlen); + close(infd); + close(outfd); + return 0; +} + + diff --git a/nuttx/configs/ea3131/tools/lpchdr.h b/nuttx/configs/ea3131/tools/lpchdr.h index 036dc8728..46cc91076 100755 --- a/nuttx/configs/ea3131/tools/lpchdr.h +++ b/nuttx/configs/ea3131/tools/lpchdr.h @@ -1,105 +1,105 @@ -/************************************************************************************
- * configs/ea3131/tools/lpchdr.h
- *
- * Copyright (C) 2010 Gregory Nutt. All rights reserved.
- * Author: Gregory Nutt <spudmonkey@racsa.co.cr>
- *
- * Redistribution and use in source and binary forms, with or without
- * modification, are permitted provided that the following conditions
- * are met:
- *
- * 1. Redistributions of source code must retain the above copyright
- * notice, this list of conditions and the following disclaimer.
- * 2. Redistributions in binary form must reproduce the above copyright
- * notice, this list of conditions and the following disclaimer in
- * the documentation and/or other materials provided with the
- * distribution.
- * 3. Neither the name NuttX nor the names of its contributors may be
- * used to endorse or promote products derived from this software
- * without specific prior written permission.
- *
- * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
- * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
- * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
- * FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE
- * COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
- * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING,
- * BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS
- * OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED
- * AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
- * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
- * ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
- * POSSIBILITY OF SUCH DAMAGE.
- *
- ************************************************************************************/
-
-#ifndef __CONFIGS_EA3131_TOOLS_BINFMT_H
-#define __CONFIGS_EA3131_TOOLS_BINFMT_H
-
-/************************************************************************************
- * Included Files
- ************************************************************************************/
-
-#include <stdint.h>
-
-/************************************************************************************
- * Definitions
- ************************************************************************************/
-
-/************************************************************************************
- * Public Types
- ************************************************************************************/
-
-struct lpc313x_header_s
-{
- /* OFFS DESCRIPTION */
- uint32_t vector; /* 0x00 Valid ARM instruction. Usually this will be
- * a branch instruction to entry point of the
- * image. */
- uint32_t magic; /* 0x04 This field is used by boot ROM to detect a
- * valid image header. This field should always
- * be set to 0x41676d69. */
- uint32_t execution_crc32; /* 0x08 CRC32 value of execution part of the image. If
- * the ‘image_type’ is set to ‘0xA’, this field
- * is ignored by boot ROM. */
- uint32_t Reserved0[4]; /* 0x0c-0x18: Should be zero. */
- uint32_t imageType; /* 0x1c Specifies whether CRC check should be done
- * on the image or not:
- * 0xA – No CRC check required.
- * 0xB – Do CRC32 check on both header and
- * execution part of the image. */
- uint32_t imageLength; /* 0x20 Total image length including header rounded
- * up to the nearest 512 byte boundary. In C
- * language the field can be computed as:
- * imageLength = (Actual length + 511) & ~0x1FF; */
- uint32_t releaseID; /* 0x24 Release or version number of the image. Note,
- * this field is not used by boot ROM but is
- * provided to track the image versions. */
- uint32_t buildTime; /* 0x28 Time (expressed in EPOC time format) at which
- * image is built. Note, this field is not used
- * by boot ROM but is provided to track the image
- * versions. */
- uint32_t sbzBootParameter; /* 0x2c hould be zero. */
- uint32_t cust_reserved[15]; /* 0x30-0x68: Reserved for customer use (60 bytes) */
- uint32_t header_crc32; /* 0x6c CRC32 value of the header (bytes 0x00 to 0x6C
- * of the image). If the ‘image_type’ is set
- * to ‘0xA’, this field is ignored by boot ROM. */
- uint32_t Reserved1[4]; /* 0x70-0x7c: Should be zero. */
- /* 0x80 Start of program code (128Kb max). The final
- * image has to be padded to the nearest 512
- * byte boundary */
-};
-
-/************************************************************************************
- * Public data
- ************************************************************************************/
-
-/************************************************************************************
- * Public Functions
- ************************************************************************************/
-
-extern uint32_t crc32part(const uint8_t *src, size_t len, uint32_t crc32val);
-extern uint32_t crc32(const uint8_t *src, size_t len);
-
-#endif /* __CONFIGS_EA3131_TOOLS_BINFMT_H */
-
+/************************************************************************************ + * configs/ea3131/tools/lpchdr.h + * + * Copyright (C) 2010 Gregory Nutt. All rights reserved. + * Author: Gregory Nutt <spudmonkey@racsa.co.cr> + * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions + * are met: + * + * 1. Redistributions of source code must retain the above copyright + * notice, this list of conditions and the following disclaimer. + * 2. Redistributions in binary form must reproduce the above copyright + * notice, this list of conditions and the following disclaimer in + * the documentation and/or other materials provided with the + * distribution. + * 3. Neither the name NuttX nor the names of its contributors may be + * used to endorse or promote products derived from this software + * without specific prior written permission. + * + * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS + * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT + * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS + * FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE + * COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, + * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, + * BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS + * OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED + * AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT + * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN + * ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE + * POSSIBILITY OF SUCH DAMAGE. + * + ************************************************************************************/ + +#ifndef __CONFIGS_EA3131_TOOLS_LPCHDR_H +#define __CONFIGS_EA3131_TOOLS_LPCHDR_H + +/************************************************************************************ + * Included Files + ************************************************************************************/ + +#include <stdint.h> + +/************************************************************************************ + * Definitions + ************************************************************************************/ + +/************************************************************************************ + * Public Types + ************************************************************************************/ + +struct lpc31_header_s +{ + /* OFFS DESCRIPTION */ + uint32_t vector; /* 0x00 Valid ARM instruction. Usually this will be + * a branch instruction to entry point of the + * image. */ + uint32_t magic; /* 0x04 This field is used by boot ROM to detect a + * valid image header. This field should always + * be set to 0x41676d69. */ + uint32_t execution_crc32; /* 0x08 CRC32 value of execution part of the image. If + * the ‘image_type’ is set to ‘0xA’, this field + * is ignored by boot ROM. */ + uint32_t Reserved0[4]; /* 0x0c-0x18: Should be zero. */ + uint32_t imageType; /* 0x1c Specifies whether CRC check should be done + * on the image or not: + * 0xA – No CRC check required. + * 0xB – Do CRC32 check on both header and + * execution part of the image. */ + uint32_t imageLength; /* 0x20 Total image length including header rounded + * up to the nearest 512 byte boundary. In C + * language the field can be computed as: + * imageLength = (Actual length + 511) & ~0x1FF; */ + uint32_t releaseID; /* 0x24 Release or version number of the image. Note, + * this field is not used by boot ROM but is + * provided to track the image versions. */ + uint32_t buildTime; /* 0x28 Time (expressed in EPOC time format) at which + * image is built. Note, this field is not used + * by boot ROM but is provided to track the image + * versions. */ + uint32_t sbzBootParameter; /* 0x2c hould be zero. */ + uint32_t cust_reserved[15]; /* 0x30-0x68: Reserved for customer use (60 bytes) */ + uint32_t header_crc32; /* 0x6c CRC32 value of the header (bytes 0x00 to 0x6C + * of the image). If the ‘image_type’ is set + * to ‘0xA’, this field is ignored by boot ROM. */ + uint32_t Reserved1[4]; /* 0x70-0x7c: Should be zero. */ + /* 0x80 Start of program code (128Kb max). The final + * image has to be padded to the nearest 512 + * byte boundary */ +}; + +/************************************************************************************ + * Public data + ************************************************************************************/ + +/************************************************************************************ + * Public Functions + ************************************************************************************/ + +extern uint32_t crc32part(const uint8_t *src, size_t len, uint32_t crc32val); +extern uint32_t crc32(const uint8_t *src, size_t len); + +#endif /* __CONFIGS_EA3131_TOOLS_LPCHDR_H */ + diff --git a/nuttx/configs/ea3131/usbserial/Make.defs b/nuttx/configs/ea3131/usbserial/Make.defs index 377c417c8..b1e236df8 100755 --- a/nuttx/configs/ea3131/usbserial/Make.defs +++ b/nuttx/configs/ea3131/usbserial/Make.defs @@ -37,23 +37,23 @@ include ${TOPDIR}/.config # Setup for the selected toolchain -ifeq ($(CONFIG_LPC313X_CODESOURCERYW),y) +ifeq ($(CONFIG_LPC31XX_CODESOURCERYW),y) # CodeSourcery under Windows CROSSDEV = arm-none-eabi- WINTOOL = y MAXOPTIMIZATION = -O2 endif -ifeq ($(CONFIG_LPC313X_CODESOURCERYL),y) +ifeq ($(CONFIG_LPC31XX_CODESOURCERYL),y) # CodeSourcery under Linux CROSSDEV = arm-none-eabi- MAXOPTIMIZATION = -O2 endif -ifeq ($(CONFIG_LPC313X_DEVKITARM),y) +ifeq ($(CONFIG_LPC31XX_DEVKITARM),y) # devkitARM under Windows CROSSDEV = arm-eabi- WINTOOL = y endif -ifeq ($(CONFIG_LPC313X_BUILDROOT),y) +ifeq ($(CONFIG_LPC31XX_BUILDROOT),y) # NuttX buildroot under Linux or Cygwin CROSSDEV = arm-elf- MAXOPTIMIZATION = -Os @@ -121,7 +121,7 @@ OBJEXT = .o LIBEXT = .a EXEEXT = -ifneq ($(CONFIG_LPC313X_BUILDROOT),y) +ifneq ($(CONFIG_LPC31XX_BUILDROOT),y) LDFLAGS += -nostartfiles -nodefaultlibs endif ifeq ($(CONFIG_DEBUG_SYMBOLS),y) diff --git a/nuttx/configs/ea3131/usbserial/defconfig b/nuttx/configs/ea3131/usbserial/defconfig index 29c169cfd..d06212649 100755 --- a/nuttx/configs/ea3131/usbserial/defconfig +++ b/nuttx/configs/ea3131/usbserial/defconfig @@ -50,13 +50,13 @@ # CONFIG_ENDIAN_BIG - define if big endian (default is little endian) # CONFIG_BOARD_LOOPSPERMSEC - for delay loops # CONFIG_DRAM_SIZE - For most ARM9 architectures, this describes the -# size of installed DRAM. For the LPC313X, it is used only to +# size of installed DRAM. For the LPC31XX, it is used only to # deterimine how to map the executable regions. It is SDRAM size # only if you are executing out of the external SDRAM; or it could # be NOR FLASH size, external SRAM size, or internal SRAM size. # CONFIG_DRAM_START - The start address of DRAM (physical) # CONFIG_DRAM_VSTART - The startaddress of DRAM (virtual) -# CONFIG_ARCH_IRQPRIO - The LPC313x supports interrupt prioritization +# CONFIG_ARCH_IRQPRIO - The LPC31xx supports interrupt prioritization # CONFIG_ARCH_INTERRUPTSTACK - This architecture supports an interrupt # stack. If defined, this symbol is the size of the interrupt # stack in bytes. If not defined, the user task stacks will be @@ -76,7 +76,7 @@ CONFIG_ARCH=arm CONFIG_ARCH_ARM=y CONFIG_ARCH_ARM926EJS=y -CONFIG_ARCH_CHIP=lpc313x +CONFIG_ARCH_CHIP=lpc31xx CONFIG_ARCH_CHIP_LPC3131=y CONFIG_ARCH_BOARD=ea3131 CONFIG_ARCH_BOARD_EA3131=y @@ -108,54 +108,54 @@ CONFIG_ARCH_ROMPGTABLE=y # Identify toolchain and linker options # -CONFIG_LPC313X_CODESOURCERYW=n -CONFIG_LPC313X_CODESOURCERYL=y -CONFIG_LPC313X_DEVKITARM=n -CONFIG_LPC313X_BUILDROOT=n +CONFIG_LPC31XX_CODESOURCERYW=n +CONFIG_LPC31XX_CODESOURCERYL=y +CONFIG_LPC31XX_DEVKITARM=n +CONFIG_LPC31XX_BUILDROOT=n # # Individual subsystems can be enabled: # -CONFIG_LPC313X_MCI=n -CONFIG_LPC313X_SPI=n -CONFIG_LPC313X_UART=y +CONFIG_LPC31XX_MCI=n +CONFIG_LPC31XX_SPI=n +CONFIG_LPC31XX_UART=y # # Exernal memory available on the board (see also CONFIG_MM_REGIONS) # -# CONFIG_LPC313X_EXTSRAM0 - Select if external SRAM0 is present -# CONFIG_LPC313X_EXTSRAM0HEAP - Select if external SRAM0 should be +# CONFIG_LPC31XX_EXTSRAM0 - Select if external SRAM0 is present +# CONFIG_LPC31XX_EXTSRAM0HEAP - Select if external SRAM0 should be # configured as part of the NuttX heap. -# CONFIG_LPC313X_EXTSRAM0SIZE - Size (in bytes) of the installed +# CONFIG_LPC31XX_EXTSRAM0SIZE - Size (in bytes) of the installed # external SRAM0 memory -# CONFIG_LPC313X_EXTSRAM1 - Select if external SRAM1 is present -# CONFIG_LPC313X_EXTSRAM1HEAP - Select if external SRAM1 should be +# CONFIG_LPC31XX_EXTSRAM1 - Select if external SRAM1 is present +# CONFIG_LPC31XX_EXTSRAM1HEAP - Select if external SRAM1 should be # configured as part of the NuttX heap. -# CONFIG_LPC313X_EXTSRAM1SIZE - Size (in bytes) of the installed +# CONFIG_LPC31XX_EXTSRAM1SIZE - Size (in bytes) of the installed # external SRAM1 memory -# CONFIG_LPC313X_EXTSDRAM - Select if external SDRAM is present -# CONFIG_LPC313X_EXTSDRAMHEAP - Select if external SDRAM should be +# CONFIG_LPC31XX_EXTSDRAM - Select if external SDRAM is present +# CONFIG_LPC31XX_EXTSDRAMHEAP - Select if external SDRAM should be # configured as part of the NuttX heap. -# CONFIG_LPC313X_EXTSDRAMSIZE - Size (in bytes) of the installed +# CONFIG_LPC31XX_EXTSDRAMSIZE - Size (in bytes) of the installed # external SDRAM memory -# CONFIG_LPC313X_EXTNAND - Select if external NAND is present -# CONFIG_LPC313X_EXTSDRAMSIZE - Size (in bytes) of the installed +# CONFIG_LPC31XX_EXTNAND - Select if external NAND is present +# CONFIG_LPC31XX_EXTSDRAMSIZE - Size (in bytes) of the installed # external NAND memory # -CONFIG_LPC313X_EXTSRAM0=n -CONFIG_LPC313X_EXTSRAM0HEAP=n -CONFIG_LPC313X_EXTSRAM0SIZE=(128*1024) -CONFIG_LPC313X_EXTSRAM1=n -CONFIG_LPC313X_EXTSRAM1HEAP=n -CONFIG_LPC313X_EXTSRAM1SIZE=(128*1024) -CONFIG_LPC313X_EXTSDRAM=n -CONFIG_LPC313X_EXTSDRAMHEAP=n -CONFIG_LPC313X_EXTSDRAMSIZE=(64*1024*1024) -CONFIG_LPC313X_EXTNAND=n -CONFIG_LPC313X_EXTNANDSIZE=(64*1024*1024) +CONFIG_LPC31XX_EXTSRAM0=n +CONFIG_LPC31XX_EXTSRAM0HEAP=n +CONFIG_LPC31XX_EXTSRAM0SIZE=(128*1024) +CONFIG_LPC31XX_EXTSRAM1=n +CONFIG_LPC31XX_EXTSRAM1HEAP=n +CONFIG_LPC31XX_EXTSRAM1SIZE=(128*1024) +CONFIG_LPC31XX_EXTSDRAM=n +CONFIG_LPC31XX_EXTSDRAMHEAP=n +CONFIG_LPC31XX_EXTSDRAMSIZE=(64*1024*1024) +CONFIG_LPC31XX_EXTNAND=n +CONFIG_LPC31XX_EXTNANDSIZE=(64*1024*1024) # -# LPC313X specific device driver settings +# LPC31XX specific device driver settings # # CONFIG_UART_SERIAL_CONSOLE - selects the UART for the # console and ttys0 @@ -538,20 +538,20 @@ CONFIG_USBDEV_TRACE=y CONFIG_USBDEV_TRACE_NRECORDS=128 # -# LPC313X USB Configuration +# LPC31XX USB Configuration # -# CONFIG_LPC313X_GIO_USBATTACH +# CONFIG_LPC31XX_GIO_USBATTACH # GIO that detects USB attach/detach events -# CONFIG_LPC313X_GIO_USBDPPULLUP +# CONFIG_LPC31XX_GIO_USBDPPULLUP # GIO # CONFIG_DMA320_USBDEV_DMA -# Enable LPC313X-specific DMA support +# Enable LPC31XX-specific DMA support # -CONFIG_LPC313X_GIO_USBATTACH=6 -CONFIG_LPC313X_GIO_USBDPPULLUP=17 -CONFIG_LPC313X_VENDORID=0xd320 -CONFIG_LPC313X_PRODUCTID=0x3211 -CONFIG_LPC313X_USBDEV_DMA=n +CONFIG_LPC31XX_GIO_USBATTACH=6 +CONFIG_LPC31XX_GIO_USBDPPULLUP=17 +CONFIG_LPC31XX_VENDORID=0xd320 +CONFIG_LPC31XX_PRODUCTID=0x3211 +CONFIG_LPC31XX_USBDEV_DMA=n # # USB Serial Device Configuration diff --git a/nuttx/configs/ea3131/usbserial/ld.script b/nuttx/configs/ea3131/usbserial/ld.script index 1bdc7d9fc..380051e28 100755 --- a/nuttx/configs/ea3131/usbserial/ld.script +++ b/nuttx/configs/ea3131/usbserial/ld.script @@ -34,7 +34,7 @@ ****************************************************************************/ /* The LPC3131 has 192Kb of ISRAM beginning at virtual address 0x1102:8000. - * LPC313x boot ROM expects the boot image be compiled with entry point at + * LPC31xx boot ROM expects the boot image be compiled with entry point at * 0x1102:9000. A 128b header will appear at this address (applied by * lpc313xImgCreator) and the executable code must begin at 0x1102:9080. */ diff --git a/nuttx/configs/ea3131/usbstorage/Make.defs b/nuttx/configs/ea3131/usbstorage/Make.defs index 21506cbed..6838c9d69 100755 --- a/nuttx/configs/ea3131/usbstorage/Make.defs +++ b/nuttx/configs/ea3131/usbstorage/Make.defs @@ -37,23 +37,23 @@ include ${TOPDIR}/.config # Setup for the selected toolchain -ifeq ($(CONFIG_LPC313X_CODESOURCERYW),y) +ifeq ($(CONFIG_LPC31XX_CODESOURCERYW),y) # CodeSourcery under Windows CROSSDEV = arm-none-eabi- WINTOOL = y MAXOPTIMIZATION = -O2 endif -ifeq ($(CONFIG_LPC313X_CODESOURCERYL),y) +ifeq ($(CONFIG_LPC31XX_CODESOURCERYL),y) # CodeSourcery under Linux CROSSDEV = arm-none-eabi- MAXOPTIMIZATION = -O2 endif -ifeq ($(CONFIG_LPC313X_DEVKITARM),y) +ifeq ($(CONFIG_LPC31XX_DEVKITARM),y) # devkitARM under Windows CROSSDEV = arm-eabi- WINTOOL = y endif -ifeq ($(CONFIG_LPC313X_BUILDROOT),y) +ifeq ($(CONFIG_LPC31XX_BUILDROOT),y) # NuttX buildroot under Linux or Cygwin CROSSDEV = arm-elf- MAXOPTIMIZATION = -Os @@ -121,7 +121,7 @@ OBJEXT = .o LIBEXT = .a EXEEXT = -ifneq ($(CONFIG_LPC313X_BUILDROOT),y) +ifneq ($(CONFIG_LPC31XX_BUILDROOT),y) LDFLAGS += -nostartfiles -nodefaultlibs endif ifeq ($(CONFIG_DEBUG_SYMBOLS),y) diff --git a/nuttx/configs/ea3131/usbstorage/defconfig b/nuttx/configs/ea3131/usbstorage/defconfig index df2cb7464..5dc459316 100755 --- a/nuttx/configs/ea3131/usbstorage/defconfig +++ b/nuttx/configs/ea3131/usbstorage/defconfig @@ -50,13 +50,13 @@ # CONFIG_ENDIAN_BIG - define if big endian (default is little endian) # CONFIG_BOARD_LOOPSPERMSEC - for delay loops # CONFIG_DRAM_SIZE - For most ARM9 architectures, this describes the -# size of installed DRAM. For the LPC313X, it is used only to +# size of installed DRAM. For the LPC31XX, it is used only to # deterimine how to map the executable regions. It is SDRAM size # only if you are executing out of the external SDRAM; or it could # be NOR FLASH size, external SRAM size, or internal SRAM size. # CONFIG_DRAM_START - The start address of DRAM (physical) # CONFIG_DRAM_VSTART - The startaddress of DRAM (virtual) -# CONFIG_ARCH_IRQPRIO - The LPC313x supports interrupt prioritization +# CONFIG_ARCH_IRQPRIO - The LPC31xx supports interrupt prioritization # CONFIG_ARCH_INTERRUPTSTACK - This architecture supports an interrupt # stack. If defined, this symbol is the size of the interrupt # stack in bytes. If not defined, the user task stacks will be @@ -76,7 +76,7 @@ CONFIG_ARCH=arm CONFIG_ARCH_ARM=y CONFIG_ARCH_ARM926EJS=y -CONFIG_ARCH_CHIP=lpc313x +CONFIG_ARCH_CHIP=lpc31xx CONFIG_ARCH_CHIP_LPC3131=y CONFIG_ARCH_BOARD=ea3131 CONFIG_ARCH_BOARD_EA3131=y @@ -108,54 +108,54 @@ CONFIG_ARCH_ROMPGTABLE=y # Identify toolchain and linker options # -CONFIG_LPC313X_CODESOURCERYW=n -CONFIG_LPC313X_CODESOURCERYL=y -CONFIG_LPC313X_DEVKITARM=n -CONFIG_LPC313X_BUILDROOT=n +CONFIG_LPC31XX_CODESOURCERYW=n +CONFIG_LPC31XX_CODESOURCERYL=y +CONFIG_LPC31XX_DEVKITARM=n +CONFIG_LPC31XX_BUILDROOT=n # # Individual subsystems can be enabled: # -CONFIG_LPC313X_MCI=n -CONFIG_LPC313X_SPI=n -CONFIG_LPC313X_UART=y +CONFIG_LPC31XX_MCI=n +CONFIG_LPC31XX_SPI=n +CONFIG_LPC31XX_UART=y # # Exernal memory available on the board (see also CONFIG_MM_REGIONS) # -# CONFIG_LPC313X_EXTSRAM0 - Select if external SRAM0 is present -# CONFIG_LPC313X_EXTSRAM0HEAP - Select if external SRAM0 should be +# CONFIG_LPC31XX_EXTSRAM0 - Select if external SRAM0 is present +# CONFIG_LPC31XX_EXTSRAM0HEAP - Select if external SRAM0 should be # configured as part of the NuttX heap. -# CONFIG_LPC313X_EXTSRAM0SIZE - Size (in bytes) of the installed +# CONFIG_LPC31XX_EXTSRAM0SIZE - Size (in bytes) of the installed # external SRAM0 memory -# CONFIG_LPC313X_EXTSRAM1 - Select if external SRAM1 is present -# CONFIG_LPC313X_EXTSRAM1HEAP - Select if external SRAM1 should be +# CONFIG_LPC31XX_EXTSRAM1 - Select if external SRAM1 is present +# CONFIG_LPC31XX_EXTSRAM1HEAP - Select if external SRAM1 should be # configured as part of the NuttX heap. -# CONFIG_LPC313X_EXTSRAM1SIZE - Size (in bytes) of the installed +# CONFIG_LPC31XX_EXTSRAM1SIZE - Size (in bytes) of the installed # external SRAM1 memory -# CONFIG_LPC313X_EXTSDRAM - Select if external SDRAM is present -# CONFIG_LPC313X_EXTSDRAMHEAP - Select if external SDRAM should be +# CONFIG_LPC31XX_EXTSDRAM - Select if external SDRAM is present +# CONFIG_LPC31XX_EXTSDRAMHEAP - Select if external SDRAM should be # configured as part of the NuttX heap. -# CONFIG_LPC313X_EXTSDRAMSIZE - Size (in bytes) of the installed +# CONFIG_LPC31XX_EXTSDRAMSIZE - Size (in bytes) of the installed # external SDRAM memory -# CONFIG_LPC313X_EXTNAND - Select if external NAND is present -# CONFIG_LPC313X_EXTSDRAMSIZE - Size (in bytes) of the installed +# CONFIG_LPC31XX_EXTNAND - Select if external NAND is present +# CONFIG_LPC31XX_EXTSDRAMSIZE - Size (in bytes) of the installed # external NAND memory # -CONFIG_LPC313X_EXTSRAM0=n -CONFIG_LPC313X_EXTSRAM0HEAP=n -CONFIG_LPC313X_EXTSRAM0SIZE=(128*1024) -CONFIG_LPC313X_EXTSRAM1=n -CONFIG_LPC313X_EXTSRAM1HEAP=n -CONFIG_LPC313X_EXTSRAM1SIZE=(128*1024) -CONFIG_LPC313X_EXTSDRAM=n -CONFIG_LPC313X_EXTSDRAMHEAP=n -CONFIG_LPC313X_EXTSDRAMSIZE=(64*1024*1024) -CONFIG_LPC313X_EXTNAND=n -CONFIG_LPC313X_EXTNANDSIZE=(64*1024*1024) +CONFIG_LPC31XX_EXTSRAM0=n +CONFIG_LPC31XX_EXTSRAM0HEAP=n +CONFIG_LPC31XX_EXTSRAM0SIZE=(128*1024) +CONFIG_LPC31XX_EXTSRAM1=n +CONFIG_LPC31XX_EXTSRAM1HEAP=n +CONFIG_LPC31XX_EXTSRAM1SIZE=(128*1024) +CONFIG_LPC31XX_EXTSDRAM=n +CONFIG_LPC31XX_EXTSDRAMHEAP=n +CONFIG_LPC31XX_EXTSDRAMSIZE=(64*1024*1024) +CONFIG_LPC31XX_EXTNAND=n +CONFIG_LPC31XX_EXTNANDSIZE=(64*1024*1024) # -# LPC313X specific device driver settings +# LPC31XX specific device driver settings # # CONFIG_UART_SERIAL_CONSOLE - selects the UART for the # console and ttys0 @@ -538,20 +538,20 @@ CONFIG_USBDEV_TRACE=n CONFIG_USBDEV_TRACE_NRECORDS=128 # -# LPC313X USB Configuration +# LPC31XX USB Configuration # -# CONFIG_LPC313X_GIO_USBATTACH +# CONFIG_LPC31XX_GIO_USBATTACH # GIO that detects USB attach/detach events -# CONFIG_LPC313X_GIO_USBDPPULLUP +# CONFIG_LPC31XX_GIO_USBDPPULLUP # GIO # CONFIG_DMA320_USBDEV_DMA -# Enable LPC313X-specific DMA support +# Enable LPC31XX-specific DMA support # -CONFIG_LPC313X_GIO_USBATTACH=6 -CONFIG_LPC313X_GIO_USBDPPULLUP=17 -CONFIG_LPC313X_VENDORID=0xd320 -CONFIG_LPC313X_PRODUCTID=0x3211 -CONFIG_LPC313X_USBDEV_DMA=n +CONFIG_LPC31XX_GIO_USBATTACH=6 +CONFIG_LPC31XX_GIO_USBDPPULLUP=17 +CONFIG_LPC31XX_VENDORID=0xd320 +CONFIG_LPC31XX_PRODUCTID=0x3211 +CONFIG_LPC31XX_USBDEV_DMA=n # # USB Serial Device Configuration diff --git a/nuttx/configs/ea3131/usbstorage/ld.script b/nuttx/configs/ea3131/usbstorage/ld.script index c6ba1c293..9828e5c97 100755 --- a/nuttx/configs/ea3131/usbstorage/ld.script +++ b/nuttx/configs/ea3131/usbstorage/ld.script @@ -34,7 +34,7 @@ ****************************************************************************/ /* The LPC3131 has 192Kb of ISRAM beginning at virtual address 0x1102:8000. - * LPC313x boot ROM expects the boot image be compiled with entry point at + * LPC31xx boot ROM expects the boot image be compiled with entry point at * 0x1102:9000. A 128b header will appear at this address (applied by * lpc313xImgCreator) and the executable code must begin at 0x1102:9080. */ |