diff options
Diffstat (limited to 'nuttx/configs/freedom-kl25z/README.txt')
| -rw-r--r-- | nuttx/configs/freedom-kl25z/README.txt | 38 |
1 files changed, 0 insertions, 38 deletions
diff --git a/nuttx/configs/freedom-kl25z/README.txt b/nuttx/configs/freedom-kl25z/README.txt index bf1101e36..b1a9b888e 100644 --- a/nuttx/configs/freedom-kl25z/README.txt +++ b/nuttx/configs/freedom-kl25z/README.txt @@ -298,44 +298,6 @@ instead of configure.sh: Where <subdir> is one of the following: - ostest: - ------ - This configuration directory, performs a simple OS test using - apps/examples/ostest. - - NOTES: - - 1. This configuration uses the mconf-based configuration tool. To - change this configuration using that tool, you should: - - a. Build and install the kconfig-mconf tool. See nuttx/README.txt - and misc/tools/ - - b. Execute 'make menuconfig' in nuttx/ in order to start the - reconfiguration process. - - 2. Default toolchain: - - CONFIG_HOST_WINDOWS=y : Builds under Windows - CONFIG_WINDOWS_CYGWIN=y : Using Cygwin - CONFIG_ARMV6M_TOOLCHAIN_CODESOURCERYW=y : CodeSourcery for Windows - - 3. Serial Console. A serial console is required to see the OS test - output. The serial console is configured on UART0 which is available - on J1: - - ---------------- --------- - UART0 SIGNAL J1 pin - ---------------- --------- - UART0_RX (PTA1) J1, pin 2 - UART0_TX (PTA2) J1, pin 4 - - Ground is available on J2 pin 14. 3.3V is available on J3 and J4. - - It is possible to configure NSH to use a USB serial console instead - of an RS-232 serial console. However, that configuration has not - been impelmented as of this writing. - minnsh: ------ |