diff options
Diffstat (limited to 'nuttx/configs/hymini-stm32v/src/up_nsh.c')
-rw-r--r-- | nuttx/configs/hymini-stm32v/src/up_nsh.c | 182 |
1 files changed, 182 insertions, 0 deletions
diff --git a/nuttx/configs/hymini-stm32v/src/up_nsh.c b/nuttx/configs/hymini-stm32v/src/up_nsh.c new file mode 100644 index 000000000..d7c4605ac --- /dev/null +++ b/nuttx/configs/hymini-stm32v/src/up_nsh.c @@ -0,0 +1,182 @@ +/**************************************************************************** + * config/hymini-stm32v/src/up_nsh.c + * arch/arm/src/board/up_nsh.c + * + * Copyright (C) 2009, 2011 Gregory Nutt. All rights reserved. + * Author: Gregory Nutt <gnutt@nuttx.org> + * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions + * are met: + * + * 1. Redistributions of source code must retain the above copyright + * notice, this list of conditions and the following disclaimer. + * 2. Redistributions in binary form must reproduce the above copyright + * notice, this list of conditions and the following disclaimer in + * the documentation and/or other materials provided with the + * distribution. + * 3. Neither the name NuttX nor the names of its contributors may be + * used to endorse or promote products derived from this software + * without specific prior written permission. + * + * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS + * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT + * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS + * FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE + * COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, + * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, + * BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS + * OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED + * AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT + * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN + * ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE + * POSSIBILITY OF SUCH DAMAGE. + * + ****************************************************************************/ + +/**************************************************************************** + * Included Files + ****************************************************************************/ + +#include <nuttx/config.h> + +#include <stdbool.h> +#include <stdio.h> +#include <debug.h> +#include <errno.h> + +#ifdef CONFIG_STM32_SPI1 +# include <nuttx/spi.h> +# include <nuttx/mtd.h> +#endif + +#ifdef CONFIG_STM32_SDIO +# include <nuttx/sdio.h> +# include <nuttx/mmcsd.h> +#endif + +#include "stm32_internal.h" +#include "hymini_stm32v-internal.h" + +/**************************************************************************** + * Pre-Processor Definitions + ****************************************************************************/ + +/* Configuration ************************************************************/ + +/* For now, don't build in any SPI1 support -- NSH is not using it */ + +#undef CONFIG_STM32_SPI1 + + +/* PORT and SLOT number probably depend on the board configuration */ + +#ifdef CONFIG_ARCH_BOARD_HYMINI_STM32V +# define CONFIG_NSH_HAVEUSBDEV 1 +# define CONFIG_NSH_HAVEMMCSD 1 +# if defined(CONFIG_NSH_MMCSDSLOTNO) && CONFIG_NSH_MMCSDSLOTNO != 0 +# error "Only one MMC/SD slot" +# undef CONFIG_NSH_MMCSDSLOTNO +# endif +# ifndef CONFIG_NSH_MMCSDSLOTNO +# define CONFIG_NSH_MMCSDSLOTNO 0 +# endif +#else + /* Add configuration for new STM32 boards here */ +# error "Unrecognized STM32 board" +# undef CONFIG_NSH_HAVEUSBDEV +# undef CONFIG_NSH_HAVEMMCSD +#endif + +/* Can't support USB features if USB is not enabled */ + +#ifndef CONFIG_USBDEV +# undef CONFIG_NSH_HAVEUSBDEV +#endif + +/* Can't support MMC/SD features if mountpoints are disabled or if SDIO support + * is not enabled. + */ + +#if defined(CONFIG_DISABLE_MOUNTPOINT) || !defined(CONFIG_STM32_SDIO) +# undef CONFIG_NSH_HAVEMMCSD +#endif + +#ifndef CONFIG_NSH_MMCSDMINOR +# define CONFIG_NSH_MMCSDMINOR 0 +#endif + +/* Debug ********************************************************************/ + +#ifdef CONFIG_CPP_HAVE_VARARGS +# ifdef CONFIG_DEBUG +# define message(...) lib_lowprintf(__VA_ARGS__) +# else +# define message(...) printf(__VA_ARGS__) +# endif +#else +# ifdef CONFIG_DEBUG +# define message lib_lowprintf +# else +# define message printf +# endif +#endif + +/**************************************************************************** + * Public Functions + ****************************************************************************/ + +/**************************************************************************** + * Name: nsh_archinitialize + * + * Description: + * Perform architecture specific initialization + * + ****************************************************************************/ + +int nsh_archinitialize(void) +{ +#ifdef CONFIG_NSH_HAVEMMCSD + FAR struct sdio_dev_s *sdio; + int ret; + + /* Card detect */ + bool cd_status; +#endif + + /* Mount the SDIO-based MMC/SD block driver */ + +#ifdef CONFIG_NSH_HAVEMMCSD + /* First, get an instance of the SDIO interface */ + + message("nsh_archinitialize: Initializing SDIO slot %d\n", + CONFIG_NSH_MMCSDSLOTNO); + sdio = sdio_initialize(CONFIG_NSH_MMCSDSLOTNO); + if (!sdio) + { + message("nsh_archinitialize: Failed to initialize SDIO slot %d\n", + CONFIG_NSH_MMCSDSLOTNO); + return -ENODEV; + } + + /* Now bind the SDIO interface to the MMC/SD driver */ + + message("nsh_archinitialize: Bind SDIO to the MMC/SD driver, minor=%d\n", + CONFIG_NSH_MMCSDMINOR); + ret = mmcsd_slotinitialize(CONFIG_NSH_MMCSDMINOR, sdio); + if (ret != OK) + { + message("nsh_archinitialize: Failed to bind SDIO to the MMC/SD driver: %d\n", ret); + return ret; + } + message("nsh_archinitialize: Successfully bound SDIO to the MMC/SD driver\n"); + + /* Use SD card detect pin to check if a card is inserted */ + + cd_status = !stm32_gpioread(GPIO_SD_CD); + message("Card detect : %hhu", cd_status); + + sdio_mediachange(sdio, cd_status); +#endif + return OK; +} |