diff options
Diffstat (limited to 'nuttx/configs/lm3s6432-s2e')
| -rw-r--r-- | nuttx/configs/lm3s6432-s2e/README.txt | 48 | ||||
| -rw-r--r-- | nuttx/configs/lm3s6432-s2e/include/board.h | 12 | ||||
| -rw-r--r-- | nuttx/configs/lm3s6432-s2e/nsh/defconfig | 52 | ||||
| -rw-r--r-- | nuttx/configs/lm3s6432-s2e/ostest/defconfig | 52 | ||||
| -rw-r--r-- | nuttx/configs/lm3s6432-s2e/src/lm3s6432s2e_internal.h | 4 | ||||
| -rw-r--r-- | nuttx/configs/lm3s6432-s2e/src/up_boot.c | 20 | ||||
| -rw-r--r-- | nuttx/configs/lm3s6432-s2e/src/up_ethernet.c | 8 | ||||
| -rw-r--r-- | nuttx/configs/lm3s6432-s2e/src/up_leds.c | 22 | ||||
| -rw-r--r-- | nuttx/configs/lm3s6432-s2e/src/up_ssi.c | 26 |
9 files changed, 122 insertions, 122 deletions
diff --git a/nuttx/configs/lm3s6432-s2e/README.txt b/nuttx/configs/lm3s6432-s2e/README.txt index 669708c16..29cf80fae 100644 --- a/nuttx/configs/lm3s6432-s2e/README.txt +++ b/nuttx/configs/lm3s6432-s2e/README.txt @@ -97,12 +97,12 @@ GNU Toolchain Options To use a specific toolchain, you simply need to add one of the following configuration options to your .config (or defconfig) file: - CONFIG_LM3S_CODESOURCERYW=y : CodeSourcery under Windows - CONFIG_LM3S_CODESOURCERYL=y : CodeSourcery under Linux or on Mac OS X. - CONFIG_LM3S_DEVKITARM=y : devkitARM under Windows - CONFIG_LM3S_BUILDROOT=y : NuttX buildroot under Linux or Cygwin (default) + CONFIG_LM_CODESOURCERYW=y : CodeSourcery under Windows + CONFIG_LM_CODESOURCERYL=y : CodeSourcery under Linux or on Mac OS X. + CONFIG_LM_DEVKITARM=y : devkitARM under Windows + CONFIG_LM_BUILDROOT=y : NuttX buildroot under Linux or Cygwin (default) - If you are not using CONFIG_LM3S_BUILDROOT, then you may also have to modify + If you are not using CONFIG_LM_BUILDROOT, then you may also have to modify the PATH in the setenv.h file if your make cannot find the tools. NOTE: the CodeSourcery (for Windows) and devkitARM are Windows native toolchains. @@ -346,15 +346,15 @@ Stellaris MDL-S2E Reference Design Configuration Options Additional interrupt support can be disabled if desired to reduce memory footprint - GPIOs C-G are not pinned out on the MDL-S2E board. - CONFIG_LM3S_DISABLE_GPIOA_IRQS=n - CONFIG_LM3S_DISABLE_GPIOB_IRQS=n - CONFIG_LM3S_DISABLE_GPIOC_IRQS=y - CONFIG_LM3S_DISABLE_GPIOD_IRQS=y - CONFIG_LM3S_DISABLE_GPIOE_IRQS=y - CONFIG_LM3S_DISABLE_GPIOF_IRQS=y - CONFIG_LM3S_DISABLE_GPIOG_IRQS=y - CONFIG_LM3S_DISABLE_GPIOH_IRQS=y - CONFIG_LM3S_DISABLE_GPIOJ_IRQS=y + CONFIG_LM_DISABLE_GPIOA_IRQS=n + CONFIG_LM_DISABLE_GPIOB_IRQS=n + CONFIG_LM_DISABLE_GPIOC_IRQS=y + CONFIG_LM_DISABLE_GPIOD_IRQS=y + CONFIG_LM_DISABLE_GPIOE_IRQS=y + CONFIG_LM_DISABLE_GPIOF_IRQS=y + CONFIG_LM_DISABLE_GPIOG_IRQS=y + CONFIG_LM_DISABLE_GPIOH_IRQS=y + CONFIG_LM_DISABLE_GPIOJ_IRQS=y LM3S6432 specific device driver settings @@ -388,18 +388,18 @@ Stellaris MDL-S2E Reference Design Configuration Options value is large, then larger values of this setting may cause Rx FIFO overrun errors. Default: half of the Tx FIFO size (4). - CONFIG_LM3S_ETHERNET - This must be set (along with CONFIG_NET) + CONFIG_LM_ETHERNET - This must be set (along with CONFIG_NET) to build the LM3S Ethernet driver - CONFIG_LM3S_ETHLEDS - Enable to use Ethernet LEDs on the board. - CONFIG_LM3S_BOARDMAC - This should be set in order to use the + CONFIG_LM_ETHLEDS - Enable to use Ethernet LEDs on the board. + CONFIG_LM_BOARDMAC - This should be set in order to use the MAC address configured in the flash USER registers. - CONFIG_LM3S_ETHHDUPLEX - Set to force half duplex operation - CONFIG_LM3S_ETHNOAUTOCRC - Set to suppress auto-CRC generation - CONFIG_LM3S_ETHNOPAD - Set to suppress Tx padding - CONFIG_LM3S_MULTICAST - Set to enable multicast frames - CONFIG_LM3S_PROMISCUOUS - Set to enable promiscuous mode - CONFIG_LM3S_BADCRC - Set to enable bad CRC rejection. - CONFIG_LM3S_DUMPPACKET - Dump each packet received/sent to the console. + CONFIG_LM_ETHHDUPLEX - Set to force half duplex operation + CONFIG_LM_ETHNOAUTOCRC - Set to suppress auto-CRC generation + CONFIG_LM_ETHNOPAD - Set to suppress Tx padding + CONFIG_LM_MULTICAST - Set to enable multicast frames + CONFIG_LM_PROMISCUOUS - Set to enable promiscuous mode + CONFIG_LM_BADCRC - Set to enable bad CRC rejection. + CONFIG_LM_DUMPPACKET - Dump each packet received/sent to the console. Configurations ^^^^^^^^^^^^^^ diff --git a/nuttx/configs/lm3s6432-s2e/include/board.h b/nuttx/configs/lm3s6432-s2e/include/board.h index 06504ec4f..7fdcabf76 100644 --- a/nuttx/configs/lm3s6432-s2e/include/board.h +++ b/nuttx/configs/lm3s6432-s2e/include/board.h @@ -114,7 +114,7 @@ #ifndef __ASSEMBLY__ /************************************************************************************ - * Name: lm3s_boardinitialize + * Name: lm_boardinitialize * * Description: * All LM3S architectures must provide the following entry point. This entry point @@ -123,21 +123,21 @@ * ************************************************************************************/ -extern void lm3s_boardinitialize(void); +extern void lm_boardinitialize(void); /************************************************************************************ - * Name: lm3s_ethernetmac + * Name: lm_ethernetmac * * Description: * For the MDL-S2E Reference Design, the MAC address will be stored in the - * non-volatile USER0 and USER1 registers. If CONFIG_LM3S_BOARDMAC is defined, + * non-volatile USER0 and USER1 registers. If CONFIG_LM_BOARDMAC is defined, * this function will obtain the MAC address from these registers. * ************************************************************************************/ -#ifdef CONFIG_LM3S_BOARDMAC +#ifdef CONFIG_LM_BOARDMAC struct ether_addr; -extern void lm3s_ethernetmac(struct ether_addr *ethaddr); +extern void lm_ethernetmac(struct ether_addr *ethaddr); #endif #endif /* __ASSEMBLY__ */ diff --git a/nuttx/configs/lm3s6432-s2e/nsh/defconfig b/nuttx/configs/lm3s6432-s2e/nsh/defconfig index edd61eacc..a09bc6717 100644 --- a/nuttx/configs/lm3s6432-s2e/nsh/defconfig +++ b/nuttx/configs/lm3s6432-s2e/nsh/defconfig @@ -56,32 +56,32 @@ CONFIG_ARCH_CALIBRATION=n # # Identify toolchain and linker options # -CONFIG_LM3S_CODESOURCERYW=n -CONFIG_LM3S_CODESOURCERYL=y -CONFIG_LM3S_DEVKITARM=n -CONFIG_LM3S_BUILDROOT=n +CONFIG_LM_CODESOURCERYW=n +CONFIG_LM_CODESOURCERYL=y +CONFIG_LM_DEVKITARM=n +CONFIG_LM_BUILDROOT=n # # Disable support for interrupts on GPIOs which do not # exist on the LM3S6432 or are not pinned anywhere useful # on the S2E. # -CONFIG_LM3S_DISABLE_GPIOA_IRQS=n -CONFIG_LM3S_DISABLE_GPIOB_IRQS=n -CONFIG_LM3S_DISABLE_GPIOC_IRQS=y -CONFIG_LM3S_DISABLE_GPIOD_IRQS=y -CONFIG_LM3S_DISABLE_GPIOE_IRQS=y -CONFIG_LM3S_DISABLE_GPIOF_IRQS=y -CONFIG_LM3S_DISABLE_GPIOG_IRQS=y -CONFIG_LM3S_DISABLE_GPIOH_IRQS=y -CONFIG_LM3S_DISABLE_GPIOJ_IRQS=y +CONFIG_LM_DISABLE_GPIOA_IRQS=n +CONFIG_LM_DISABLE_GPIOB_IRQS=n +CONFIG_LM_DISABLE_GPIOC_IRQS=y +CONFIG_LM_DISABLE_GPIOD_IRQS=y +CONFIG_LM_DISABLE_GPIOE_IRQS=y +CONFIG_LM_DISABLE_GPIOF_IRQS=y +CONFIG_LM_DISABLE_GPIOG_IRQS=y +CONFIG_LM_DISABLE_GPIOH_IRQS=y +CONFIG_LM_DISABLE_GPIOJ_IRQS=y # # LM3S6432 specific serial device driver settings # -CONFIG_LM3S_UART0=y -CONFIG_LM3S_UART1=y -CONFIG_LM3S_UART2=n +CONFIG_LM_UART0=y +CONFIG_LM_UART1=y +CONFIG_LM_UART2=n CONFIG_UART0_SERIAL_CONSOLE=n CONFIG_UART1_SERIAL_CONSOLE=y CONFIG_UART2_SERIAL_CONSOLE=n @@ -115,16 +115,16 @@ CONFIG_SSI_POLLWAIT=y # # LM3S6432 specific ethernet device driver settings # -CONFIG_LM3S_ETHERNET=y -CONFIG_LM3S_ETHLEDS=n -CONFIG_LM3S_BOARDMAC=y -CONFIG_LM3S_ETHHDUPLEX=n -CONFIG_LM3S_ETHNOAUTOCRC=n -CONFIG_LM3S_ETHNOPAD=n -CONFIG_LM3S_MULTICAST=n -CONFIG_LM3S_PROMISCUOUS=n -CONFIG_LM3S_BADCRC=n -CONFIG_LM3S_DUMPPACKET=n +CONFIG_LM_ETHERNET=y +CONFIG_LM_ETHLEDS=n +CONFIG_LM_BOARDMAC=y +CONFIG_LM_ETHHDUPLEX=n +CONFIG_LM_ETHNOAUTOCRC=n +CONFIG_LM_ETHNOPAD=n +CONFIG_LM_MULTICAST=n +CONFIG_LM_PROMISCUOUS=n +CONFIG_LM_BADCRC=n +CONFIG_LM_DUMPPACKET=n # # General build options diff --git a/nuttx/configs/lm3s6432-s2e/ostest/defconfig b/nuttx/configs/lm3s6432-s2e/ostest/defconfig index 2d32db81c..9387fd086 100644 --- a/nuttx/configs/lm3s6432-s2e/ostest/defconfig +++ b/nuttx/configs/lm3s6432-s2e/ostest/defconfig @@ -56,32 +56,32 @@ CONFIG_ARCH_CALIBRATION=n # # Identify toolchain and linker options # -CONFIG_LM3S_CODESOURCERYW=n -CONFIG_LM3S_CODESOURCERYL=y -CONFIG_LM3S_DEVKITARM=n -CONFIG_LM3S_BUILDROOT=n +CONFIG_LM_CODESOURCERYW=n +CONFIG_LM_CODESOURCERYL=y +CONFIG_LM_DEVKITARM=n +CONFIG_LM_BUILDROOT=n # # Disable support for interrupts on GPIOs which do not # exist on the LM3S6432 or are not pinned anywhere useful # on the S2E. # -CONFIG_LM3S_DISABLE_GPIOA_IRQS=n -CONFIG_LM3S_DISABLE_GPIOB_IRQS=n -CONFIG_LM3S_DISABLE_GPIOC_IRQS=y -CONFIG_LM3S_DISABLE_GPIOD_IRQS=y -CONFIG_LM3S_DISABLE_GPIOE_IRQS=y -CONFIG_LM3S_DISABLE_GPIOF_IRQS=y -CONFIG_LM3S_DISABLE_GPIOG_IRQS=y -CONFIG_LM3S_DISABLE_GPIOH_IRQS=y -CONFIG_LM3S_DISABLE_GPIOJ_IRQS=y +CONFIG_LM_DISABLE_GPIOA_IRQS=n +CONFIG_LM_DISABLE_GPIOB_IRQS=n +CONFIG_LM_DISABLE_GPIOC_IRQS=y +CONFIG_LM_DISABLE_GPIOD_IRQS=y +CONFIG_LM_DISABLE_GPIOE_IRQS=y +CONFIG_LM_DISABLE_GPIOF_IRQS=y +CONFIG_LM_DISABLE_GPIOG_IRQS=y +CONFIG_LM_DISABLE_GPIOH_IRQS=y +CONFIG_LM_DISABLE_GPIOJ_IRQS=y # # LM3S6432 specific serial device driver settings # -CONFIG_LM3S_UART0=y -CONFIG_LM3S_UART1=y -CONFIG_LM3S_UART2=n +CONFIG_LM_UART0=y +CONFIG_LM_UART1=y +CONFIG_LM_UART2=n CONFIG_UART0_SERIAL_CONSOLE=n CONFIG_UART1_SERIAL_CONSOLE=y CONFIG_UART2_SERIAL_CONSOLE=n @@ -115,16 +115,16 @@ CONFIG_SSI_POLLWAIT=y # # LM3S6432 specific ethernet device driver settings # -CONFIG_LM3S_ETHERNET=n -CONFIG_LM3S_ETHLEDS=n -CONFIG_LM3S_BOARDMAC=y -CONFIG_LM3S_ETHHDUPLEX=n -CONFIG_LM3S_ETHNOAUTOCRC=n -CONFIG_LM3S_ETHNOPAD=n -CONFIG_LM3S_MULTICAST=n -CONFIG_LM3S_PROMISCUOUS=n -CONFIG_LM3S_BADCRC=n -CONFIG_LM3S_DUMPPACKET=n +CONFIG_LM_ETHERNET=n +CONFIG_LM_ETHLEDS=n +CONFIG_LM_BOARDMAC=y +CONFIG_LM_ETHHDUPLEX=n +CONFIG_LM_ETHNOAUTOCRC=n +CONFIG_LM_ETHNOPAD=n +CONFIG_LM_MULTICAST=n +CONFIG_LM_PROMISCUOUS=n +CONFIG_LM_BADCRC=n +CONFIG_LM_DUMPPACKET=n # # General build options diff --git a/nuttx/configs/lm3s6432-s2e/src/lm3s6432s2e_internal.h b/nuttx/configs/lm3s6432-s2e/src/lm3s6432s2e_internal.h index f54403c7a..f95b118ad 100644 --- a/nuttx/configs/lm3s6432-s2e/src/lm3s6432s2e_internal.h +++ b/nuttx/configs/lm3s6432-s2e/src/lm3s6432s2e_internal.h @@ -112,14 +112,14 @@ #ifndef __ASSEMBLY__ /************************************************************************************ - * Name: lm3s_ssiinitialize + * Name: lm_ssiinitialize * * Description: * Called to configure SPI chip select GPIO pins for the MDL-S2E. * ************************************************************************************/ -extern void weak_function lm3s_ssiinitialize(void); +extern void weak_function lm_ssiinitialize(void); #endif /* __ASSEMBLY__ */ #endif /* __CONFIGS_LM3S6432_S2E_SRC_LM3S6432S2E_INTERNAL_H */ diff --git a/nuttx/configs/lm3s6432-s2e/src/up_boot.c b/nuttx/configs/lm3s6432-s2e/src/up_boot.c index 184529638..da900282f 100644 --- a/nuttx/configs/lm3s6432-s2e/src/up_boot.c +++ b/nuttx/configs/lm3s6432-s2e/src/up_boot.c @@ -54,7 +54,7 @@ * Definitions ************************************************************************************/ -#if defined(CONFIG_LM3S_UART1) && !defined(CONFIG_SSI0_DISABLE) +#if defined(CONFIG_LM_UART1) && !defined(CONFIG_SSI0_DISABLE) # error Only one of UART1 and SSI0 can be enabled on this board. #endif @@ -67,7 +67,7 @@ ************************************************************************************/ /************************************************************************************ - * Name: lm3s_boardinitialize + * Name: lm_boardinitialize * * Description: * All LM3S architectures must provide the following entry point. This entry point @@ -75,16 +75,16 @@ * and mapped but before any devices have been initialized. ************************************************************************************/ -void lm3s_boardinitialize(void) +void lm_boardinitialize(void) { /* Configure SPI chip selects if 1) SSI is not disabled, and 2) the weak function - * lm3s_ssiinitialize() has been brought into the link. + * lm_ssiinitialize() has been brought into the link. */ #if !defined(CONFIG_SSI0_DISABLE) - if (lm3s_ssiinitialize) + if (lm_ssiinitialize) { - lm3s_ssiinitialize(); + lm_ssiinitialize(); } #endif @@ -96,8 +96,8 @@ void lm3s_boardinitialize(void) /* Configure serial transciever */ - lm3s_configgpio(XCVR_INV_GPIO); - lm3s_configgpio(XCVR_ENA_GPIO); - lm3s_configgpio(XCVR_ON_GPIO); - lm3s_configgpio(XCVR_OFF_GPIO); + lm_configgpio(XCVR_INV_GPIO); + lm_configgpio(XCVR_ENA_GPIO); + lm_configgpio(XCVR_ON_GPIO); + lm_configgpio(XCVR_OFF_GPIO); } diff --git a/nuttx/configs/lm3s6432-s2e/src/up_ethernet.c b/nuttx/configs/lm3s6432-s2e/src/up_ethernet.c index 09d5040c4..434ffe2c5 100644 --- a/nuttx/configs/lm3s6432-s2e/src/up_ethernet.c +++ b/nuttx/configs/lm3s6432-s2e/src/up_ethernet.c @@ -63,17 +63,17 @@ ************************************************************************************/ /************************************************************************************ - * Name: lm3s_ethernetmac + * Name: lm_ethernetmac * * Description: * For the Ethernet Eval Kits, the MAC address will be stored in the non-volatile - * USER0 and USER1 registers. If CONFIG_LM3S_BOARDMAC is defined, this function + * USER0 and USER1 registers. If CONFIG_LM_BOARDMAC is defined, this function * will obtain the MAC address from these registers. * ************************************************************************************/ -#ifdef CONFIG_LM3S_BOARDMAC -void lm3s_ethernetmac(struct ether_addr *ethaddr) +#ifdef CONFIG_LM_BOARDMAC +void lm_ethernetmac(struct ether_addr *ethaddr) { uint32_t user0; uint32_t user1; diff --git a/nuttx/configs/lm3s6432-s2e/src/up_leds.c b/nuttx/configs/lm3s6432-s2e/src/up_leds.c index 81610db34..e0dd53f28 100644 --- a/nuttx/configs/lm3s6432-s2e/src/up_leds.c +++ b/nuttx/configs/lm3s6432-s2e/src/up_leds.c @@ -72,7 +72,7 @@ /* Dump GPIO registers */ #ifdef LED_DEBUG -# define led_dumpgpio(m) lm3s_dumpgpio(LED_GPIO, m) +# define led_dumpgpio(m) lm_dumpgpio(LED_GPIO, m) #else # define led_dumpgpio(m) #endif @@ -102,10 +102,10 @@ void up_ledinit(void) /* Configure Port F, Bit 2 as an output, initial value=OFF */ - led_dumpgpio("up_ledinit before lm3s_configgpio()"); - lm3s_configgpio(LED0_GPIO); - lm3s_configgpio(LED1_GPIO); - led_dumpgpio("up_ledinit after lm3s_configgpio()"); + led_dumpgpio("up_ledinit before lm_configgpio()"); + lm_configgpio(LED0_GPIO); + lm_configgpio(LED1_GPIO); + led_dumpgpio("up_ledinit after lm_configgpio()"); g_nest = 0; } @@ -129,9 +129,9 @@ void up_ledon(int led) g_nest++; case LED_IRQSENABLED: case LED_STACKCREATED: - led_dumpgpio("up_ledon: before lm3s_gpiowrite()"); - lm3s_gpiowrite(LED1_GPIO, false); - led_dumpgpio("up_ledon: after lm3s_gpiowrite()"); + led_dumpgpio("up_ledon: before lm_gpiowrite()"); + lm_gpiowrite(LED1_GPIO, false); + led_dumpgpio("up_ledon: after lm_gpiowrite()"); break; } } @@ -157,9 +157,9 @@ void up_ledoff(int led) case LED_PANIC: if (--g_nest <= 0) { - led_dumpgpio("up_ledoff: before lm3s_gpiowrite()"); - lm3s_gpiowrite(LED1_GPIO, true); - led_dumpgpio("up_ledoff: after lm3s_gpiowrite()"); + led_dumpgpio("up_ledoff: before lm_gpiowrite()"); + lm_gpiowrite(LED1_GPIO, true); + led_dumpgpio("up_ledoff: after lm_gpiowrite()"); } break; } diff --git a/nuttx/configs/lm3s6432-s2e/src/up_ssi.c b/nuttx/configs/lm3s6432-s2e/src/up_ssi.c index a7844a979..5468e2b4d 100644 --- a/nuttx/configs/lm3s6432-s2e/src/up_ssi.c +++ b/nuttx/configs/lm3s6432-s2e/src/up_ssi.c @@ -79,7 +79,7 @@ /* Dump GPIO registers */ #ifdef SSI_VERBOSE -# define ssi_dumpgpio(m) lm3s_dumpgpio(SDCCS_GPIO, m) +# define ssi_dumpgpio(m) lm_dumpgpio(SDCCS_GPIO, m) #else # define ssi_dumpgpio(m) #endif @@ -93,30 +93,30 @@ ************************************************************************************/ /************************************************************************************ - * Name: lm3s_ssiinitialize + * Name: lm_ssiinitialize * * Description: * Called to configure SPI chip select GPIO pins for the MDL-S2E. * ************************************************************************************/ -void weak_function lm3s_ssiinitialize(void) +void weak_function lm_ssiinitialize(void) { /* Configure the SPI CS GPIO */ - ssi_dumpgpio("lm3s_ssiinitialize() Entry)"); - lm3s_configgpio(SSICS_GPIO); - ssi_dumpgpio("lm3s_ssiinitialize() Exit"); + ssi_dumpgpio("lm_ssiinitialize() Entry)"); + lm_configgpio(SSICS_GPIO); + ssi_dumpgpio("lm_ssiinitialize() Exit"); } /**************************************************************************** - * The external functions, lm3s_spiselect and lm3s_spistatus must be provided + * The external functions, lm_spiselect and lm_spistatus must be provided * by board-specific logic. The are implementations of the select and status * methods SPI interface defined by struct spi_ops_s (see include/nuttx/spi.h). * All othermethods (including up_spiinitialize()) are provided by common * logic. To use this common SPI logic on your board: * - * 1. Provide lm3s_spiselect() and lm3s_spistatus() functions in your + * 1. Provide lm_spiselect() and lm_spistatus() functions in your * board-specific logic. This function will perform chip selection and * status operations using GPIOs in the way your board is configured. * 2. Add a call to up_spiinitialize() in your low level initialization @@ -128,21 +128,21 @@ void weak_function lm3s_ssiinitialize(void) * ****************************************************************************/ -void lm3s_spiselect(FAR struct spi_dev_s *dev, enum spi_dev_e devid, bool selected) +void lm_spiselect(FAR struct spi_dev_s *dev, enum spi_dev_e devid, bool selected) { ssidbg("devid: %d CS: %s\n", (int)devid, selected ? "assert" : "de-assert"); - ssi_dumpgpio("lm3s_spiselect() Entry"); + ssi_dumpgpio("lm_spiselect() Entry"); if (devid == SPIDEV_MMCSD) { /* Assert the CS pin to the card */ - lm3s_gpiowrite(SDCCS_GPIO, !selected); + lm_gpiowrite(SDCCS_GPIO, !selected); } - ssi_dumpgpio("lm3s_spiselect() Exit"); + ssi_dumpgpio("lm_spiselect() Exit"); } -uint8_t lm3s_spistatus(FAR struct spi_dev_s *dev, enum spi_dev_e devid) +uint8_t lm_spistatus(FAR struct spi_dev_s *dev, enum spi_dev_e devid) { ssidbg("Returning SPI_STATUS_PRESENT\n"); return SPI_STATUS_PRESENT; |