diff options
Diffstat (limited to 'nuttx/configs/lpc4330-xplorer/nsh/defconfig')
| -rw-r--r-- | nuttx/configs/lpc4330-xplorer/nsh/defconfig | 20 |
1 files changed, 20 insertions, 0 deletions
diff --git a/nuttx/configs/lpc4330-xplorer/nsh/defconfig b/nuttx/configs/lpc4330-xplorer/nsh/defconfig index 179256e3d..0fc8d93ad 100644 --- a/nuttx/configs/lpc4330-xplorer/nsh/defconfig +++ b/nuttx/configs/lpc4330-xplorer/nsh/defconfig @@ -776,6 +776,10 @@ CONFIG_FTPD_CMDBUFFERSIZE=2048 # CONFIG_MB_ASCII_ENABLED - Modbus ASCII support # CONFIG_MB_RTU_ENABLED - Modbus RTU support # CONFIG_MB_TCP_ENABLED - Modbus TCP support +# CONFIG_MB_TERMIOS - Serial driver supports termios.h interfaces (tcsetattr, +# tcflush, etc.). If this is not defined, then the terminal settings (baud, +# parity, etc.) are not configurable at runtime; serial streams will not be +# flushed when closed. # CONFIG_MB_ASCII_TIMEOUT_SEC - Character timeout value for Modbus ASCII. The # character timeout value is not fixed for Modbus ASCII and is therefore # a configuration option. It should be set to the maximum expected delay @@ -822,6 +826,7 @@ CONFIG_MODBUS=n CONFIG_MB_ASCII_ENABLED=y CONFIG_MB_RTU_ENABLED=y CONFIG_MB_TCP_ENABLED=n +CONFIG_MB_TERMIOS=n CONFIG_MB_ASCII_TIMEOUT_SEC=1 CONFIG_MB_ASCII_TIMEOUT_WAIT_BEFORE_SEND_MS=0 CONFIG_MB_FUNC_HANDLERS_MAX=16 @@ -1090,6 +1095,21 @@ CONFIG_EXAMPLE_IRQBUTTONS_MAX=0 CONFIG_EXAMPLE_BUTTONS_NAME1="SW2" # +# examples/modbus +# +# CONFIG_EXAMPLES_MODBUS_PORT, Default 0 (for /dev/ttyS0) +# CONFIG_EXAMPLES_MODBUS_BAUD, Default 38400 +# CONFIG_EXAMPLES_MODBUS_PARITY, Default MB_PAR_EVEN +# +# CONFIG_EXAMPLES_MODBUS_REG_INPUT_START, Default 1000 +# CONFIG_EXAMPLES_MODBUS_REG_INPUT_NREGS, Default 4 +# CONFIG_EXAMPLES_MODBUS_REG_HOLDING_START, Default 2000 +# CONFIG_EXAMPLES_MODBUS_REG_HOLDING_NREGS, Default 130 +# +CONFIG_EXAMPLES_MODBUS_PORT=1 +CONFIG_EXAMPLES_MODBUS_BAUD=9600 + +# # Settings for examples/usbserial # # CONFIG_EXAMPLES_USBSERIAL_INONLY |