diff options
Diffstat (limited to 'nuttx/configs/ntosd-dm320/README.txt')
| -rw-r--r-- | nuttx/configs/ntosd-dm320/README.txt | 37 |
1 files changed, 32 insertions, 5 deletions
diff --git a/nuttx/configs/ntosd-dm320/README.txt b/nuttx/configs/ntosd-dm320/README.txt index f6ba08d89..d6911b688 100644 --- a/nuttx/configs/ntosd-dm320/README.txt +++ b/nuttx/configs/ntosd-dm320/README.txt @@ -1,10 +1,25 @@ README ^^^^^^ - This is the README file for the port of NuttX to the Neuros OSD - v1.0 Dev Board. This port has recently been extended to V1.0 - Production board (and that is now the default configuration). - References: +This is the README file for the port of NuttX to the Neuros OSD. + +CONTENTS +^^^^^^^^ + - Dev vs. Production Neuros OSD v1.0 boards + - Development Environment + - GNU Toolchain Options + - IDEs + - NuttX buildroot Toolchain + - ARM/DM320-specific Configuration Options + - Configurations + - Configuration Options + +Dev vs. Production Neuros OSD v1.0 boards +^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^ + + This port supports both the original Neuros OSD v1.0 Dev Board. + This port has recently been extended to V1.0 Production board (and + that is now the default configuration). References: http://www.neurostechnology.com/neuros-developer-community http://wiki.neurostechnology.com/index.php/OSD_1.0_Developer_Home @@ -103,7 +118,19 @@ IDEs NuttX is built using command-line make. It can be used with an IDE, but some effort will be required to create the project (There is a simple RIDE project - in the RIDE subdirectory). Here are a few tip before you start that effort: + in the RIDE subdirectory). + + Makefile Build + -------------- + Under Eclipse, it is pretty easy to set up an "empty makefile project" and + simply use the NuttX makefile to build the system. That is almost for free + under Linux. Under Windows, you will need to set up the "Cygwin GCC" empty + makefile project in order to work with Windows (Google for "Eclipse Cygwin" - + there is a lot of help on the internet). + + Native Build + ------------ + Here are a few tips before you start that effort: 1) Select the toolchain that you will be using in your .config file 2) Start the NuttX build at least one time from the Cygwin command line |