diff options
Diffstat (limited to 'nuttx/configs/olimex-lpc1766stk/README.txt')
-rwxr-xr-x | nuttx/configs/olimex-lpc1766stk/README.txt | 26 |
1 files changed, 26 insertions, 0 deletions
diff --git a/nuttx/configs/olimex-lpc1766stk/README.txt b/nuttx/configs/olimex-lpc1766stk/README.txt index 85d1f1018..685401cbe 100755 --- a/nuttx/configs/olimex-lpc1766stk/README.txt +++ b/nuttx/configs/olimex-lpc1766stk/README.txt @@ -806,6 +806,32 @@ Where <subdir> is one of the following: Ethernet data link layer. The Ethernet driver is disabled; SLIP IP
packets are exchanged on UART1; UART0 is still the serial console.
+ 1. Configure and build the slip-httpd configuration.
+ 2. Connect to a Linux box (assuming /dev/ttyS0)
+ 3. Reset on the target side / attach SLIP on the Linux side:
+
+ $ slattach -p slip -s 57600 /dev/ttyS0 &
+
+ This should create an interface with a name like sl0. Add -d to
+ get debug output. In the naming, slN, the N corresponds to the
+ tty device number as in /dev/ttySN.
+
+ 4. After turning over the line to the SLIP driver, you must configure
+ the network interface. Again, you do this using the standard
+ ifconfig and route commands. Assume that we have connected to a
+ host PC with address 192.168.0.101 from your target with address
+ 10.0.0.2. On the Linux PC you would execute the following as root:
+
+ $ ifconfig sl0 192.168.0.101 pointopoint 10.0.0.2 up -OR?-
+ $ ifconfig sl0 10.0.0.2 pointopoint 192.168.0.101 up
+ $ route add 10.0.0.2 dev sl0
+
+ Assuming the SLIP is attached to device sl0.
+
+ [ NOTE: As of this writing, I actually have not yet successfully ]
+ [ configured SLIP on Linux. The above are really just my working notes. ]
+ [ I suspect that I may have the IP address backward for one thing. ]
+
thttpd:
This builds the THTTPD web server example using the THTTPD and
the examples/thttpd application.
|