diff options
Diffstat (limited to 'nuttx/configs/olimex-strp711')
-rwxr-xr-x | nuttx/configs/olimex-strp711/nettest/defconfig | 4 | ||||
-rw-r--r-- | nuttx/configs/olimex-strp711/src/up_spi.c | 37 |
2 files changed, 36 insertions, 5 deletions
diff --git a/nuttx/configs/olimex-strp711/nettest/defconfig b/nuttx/configs/olimex-strp711/nettest/defconfig index 256f81665..89a638d3e 100755 --- a/nuttx/configs/olimex-strp711/nettest/defconfig +++ b/nuttx/configs/olimex-strp711/nettest/defconfig @@ -432,9 +432,6 @@ CONFIG_FS_ROMFS=n # ENC28J60 configuration # # CONFIG_NET_ENC28J60 - Enabled ENC28J60 support -# CONFIG_ENC28J60_OWNBUS - Set if the ENC28J60 is the only active device on -# the SPI bus. No locking or SPI configuration will be performed. All -# transfers will be performed from the ENC2J60 interrupt handler. # CONFIG_ENC28J60_SPIMODE - Controls the SPI mode # CONFIG_ENC28J60_FREQUENCY - Define to use a different bus frequency # CONFIG_ENC28J60_NINTERFACES - Specifies the number of physical ENC28J60 @@ -442,7 +439,6 @@ CONFIG_FS_ROMFS=n # CONFIG_ENC28J60_STATS - Collect network statistics # CONFOG_ENC28J60_HALFDUPPLEX - Default is full duplex CONFIG_NET_ENC28J60=y -CONFIG_ENC28J60_OWNBUS=n #CONFIG_ENC28J60_SPIMODE CONFIG_ENC28J60_FREQUENCY=20000000 CONFIG_ENC28J60_NINTERFACES=1 diff --git a/nuttx/configs/olimex-strp711/src/up_spi.c b/nuttx/configs/olimex-strp711/src/up_spi.c index c01cbbc87..5ca35b72e 100644 --- a/nuttx/configs/olimex-strp711/src/up_spi.c +++ b/nuttx/configs/olimex-strp711/src/up_spi.c @@ -390,6 +390,9 @@ static inline void spi_drain(FAR struct str71x_spidev_s *priv); /* SPI methods */ +#ifndef CONFIG_SPI_OWNBUS +static int spi_lock(FAR struct spi_dev_s *dev, bool lock); +#endif static void spi_select(FAR struct spi_dev_s *dev, enum spi_dev_e devid, bool selected); static uint32_t spi_setfrequency(FAR struct spi_dev_s *dev, uint32_t frequency); static uint8_t spi_status(FAR struct spi_dev_s *dev, enum spi_dev_e devid); @@ -403,7 +406,9 @@ static void spi_recvblock(FAR struct spi_dev_s *dev, FAR void *buffer, size_t static const struct spi_ops_s g_spiops = { - .lock = 0, /* Not yet implemented */ +#ifndef CONFIG_SPI_OWNBUS + .lock = spi_lock, +#endif .select = spi_select, .setfrequency = spi_setfrequency, .status = spi_status, @@ -527,6 +532,36 @@ static inline void spi_drain(FAR struct str71x_spidev_s *priv) } /**************************************************************************** + * Name: spi_lock + * + * Description: + * On SPI busses where there are multiple devices, it will be necessary to + * lock SPI to have exclusive access to the busses for a sequence of + * transfers. The bus should be locked before the chip is selected. After + * locking the SPI bus, the caller should then also call the setfrequency, + * setbits, and setmode methods to make sure that the SPI is properly + * configured for the device. If the SPI buss is being shared, then it + * may have been left in an incompatible state. + * + * Input Parameters: + * dev - Device-specific state data + * lock - true: Lock spi bus, false: unlock SPI bus + * + * Returned Value: + * None + * + ****************************************************************************/ + +#ifndef CONFIG_SPI_OWNBUS +static int spi_lock(FAR struct spi_dev_s *dev, bool lock) +{ + /* Not implemented */ + + return -ENOSYS; +} +#endif + +/**************************************************************************** * Name: spi_select * * Description: |