diff options
Diffstat (limited to 'nuttx/configs/open1788/README.txt')
| -rw-r--r-- | nuttx/configs/open1788/README.txt | 6 |
1 files changed, 3 insertions, 3 deletions
diff --git a/nuttx/configs/open1788/README.txt b/nuttx/configs/open1788/README.txt index 1425db718..1f12e4323 100644 --- a/nuttx/configs/open1788/README.txt +++ b/nuttx/configs/open1788/README.txt @@ -230,7 +230,7 @@ Using OpenOCD with the Olimex ARM-USB-OCD Open1788 board. /usr/local/share/openocd/scripts/target/lpc1788.cfg - This is the configuration file for the the LPC1788 target. + This is the configuration file for the LPC1788 target. It just sets up a few parameters then sources lpc17xx.cfg /usr/local/share/openocd/scripts/target/lpc17xx.cfg @@ -373,7 +373,7 @@ CONFIGURATION In the normal case (just 'make'), make will attempt to build both user- and kernel-mode blobs more or less interleaved. This actual works! However, for me it is very confusing so I prefer the above make command: - Make the user-space binaries first (pass1), then make the the kernel-space + Make the user-space binaries first (pass1), then make the kernel-space binaries (pass2) NOTES: @@ -417,7 +417,7 @@ CONFIGURATION System.map - Symbols in the kernel-space ELF file Loading these .elf files with OpenOCD is tricky. It appears to me - that when nuttx_user.elf is loaded, it destroys the the nuttx image + that when nuttx_user.elf is loaded, it destroys the nuttx image in FLASH. But loading the nuttx ELF does not harm the nuttx_user.elf in FLASH. Conclusion: Always load nuttx_user.elf before nuttx. |