diff options
Diffstat (limited to 'nuttx/configs/sama5d3x-ek/README.txt')
-rw-r--r-- | nuttx/configs/sama5d3x-ek/README.txt | 60 |
1 files changed, 0 insertions, 60 deletions
diff --git a/nuttx/configs/sama5d3x-ek/README.txt b/nuttx/configs/sama5d3x-ek/README.txt index 42894e1e2..8a5435aec 100644 --- a/nuttx/configs/sama5d3x-ek/README.txt +++ b/nuttx/configs/sama5d3x-ek/README.txt @@ -2675,10 +2675,6 @@ Configurations UnitTest. It integrates support for both the SAMA5 LCDC and the SAMA5 ADC touchscreen controller and provides a more advance graphics demo. It provides an interactive windowing experience. - ostest: This is another configuration that is only useful for bring-up. - It executes an exhaustive OS test to verify a correct port of NuttX - to the SAMA5D3-EK. Since it now passes that test, the configuration - has little further use other than for reference. ov2640: A test of the SAMA5 ISI using an OV2640 camera. There may be issues with some of these configurations. See the details @@ -3069,62 +3065,6 @@ Configurations Bottom line: Not ready for prime time. - ostest: - - This configuration directory, performs a simple OS test using - examples/ostest. - - NOTES: - - 1. This configuration uses the default USART1 serial console. That - is easily changed by reconfiguring to (1) enable a different - serial peripheral, and (2) selecting that serial peripheral as - the console device. - - 2. By default, this configuration is set up to build on Windows - under either a Cygwin or MSYS environment using a recent, Windows- - native, generic ARM EABI GCC toolchain (such as the CodeSourcery - toolchain). Both the build environment and the toolchain - selection can easily be changed by reconfiguring: - - CONFIG_HOST_WINDOWS=y : Windows operating system - CONFIG_WINDOWS_CYGWIN=y : POSIX environment under windows - CONFIG_ARMV7A_TOOLCHAIN_CODESOURCERYW=y : CodeSourcery for Windows - - If you are running on Linux, make *certain* that you have - CONFIG_HOST_LINUX=y *before* the first make or you will create a - corrupt configuration that may not be easy to recover from. See - the warning in the section "Information Common to All Configurations" - for further information. - - 3. This configuration executes out of CS0 NOR flash and can only - be loaded via SAM-BA. These are the relevant configuration options - the define the NOR FLASH configuration: - - CONFIG_SAMA5_BOOT_CS0FLASH=y : Boot from FLASH on CS0 - CONFIG_BOOT_RUNFROMFLASH=y : Run in place on FLASH (vs copying to RAM) - - CONFIG_SAMA5_EBICS0=y : Enable CS0 external memory - CONFIG_SAMA5_EBICS0_SIZE=134217728 : Memory size is 128KB - CONFIG_SAMA5_EBICS0_NOR=y : Memory type is NOR FLASH - - CONFIG_FLASH_START=0x10000000 : Physical FLASH start address - CONFIG_FLASH_VSTART=0x10000000 : Virtual FLASH start address - CONFIG_FLASH_SIZE=134217728 : FLASH size (again) - - CONFIG_RAM_START=0x00300400 : Data stored after page table - CONFIG_RAM_VSTART=0x00300400 - CONFIG_RAM_SIZE=114688 : Available size of 128KB - 16KB for page table - - NOTE: In order to boot in this configuration, you need to close the - BMS jumper. - - 4. Data resides in ISRAM, but can be moved to SDRAM as described above - under "SDRAM Data Configuration." - - STATUS: - See the To-Do list below - ov2640: A test of the SAMA5 ISI using an OV2640 camera. |