diff options
Diffstat (limited to 'nuttx/configs/samv71-xult/README.txt')
-rw-r--r-- | nuttx/configs/samv71-xult/README.txt | 11 |
1 files changed, 8 insertions, 3 deletions
diff --git a/nuttx/configs/samv71-xult/README.txt b/nuttx/configs/samv71-xult/README.txt index 4969f4de2..9f5268471 100644 --- a/nuttx/configs/samv71-xult/README.txt +++ b/nuttx/configs/samv71-xult/README.txt @@ -1309,7 +1309,9 @@ Configuration sub-directories configuration runs with the DCACHE in write back mode, but the SDRAM configuration fails. That is because the SDRAM initialization occurs after the D-Cache is initialized (I have not actually tried - in write back mode, it just seems that there woulc be issues. + in write back mode, it just seems that there woulc be issues. This + could be eliminated by changing the order of some initialization in + sam_start.c. System Type CONFIG_SAMV7_SDRAMC=y @@ -1339,7 +1341,10 @@ Configuration sub-directories STATUS: I suspect that the RAM timing configuration is not perfect. If you run the above RAM test you will see occasional failures after - booting into a certain state. + booting into a certain state. Sometimes it boots and the RAM test + fails 100% of the time. Other times it boots and the RAM test passes + 100% of the time. So it seems like some timing issue in the SRAM + setup. 5. The button test at apps/examples/buttons is included in the configuration. This configuration illustrates (1) use of the buttons @@ -1465,7 +1470,7 @@ Configuration sub-directories CONFIG_ARMV7M_ICACHE=y : Instruction cache is enabled CONFIG_ARMV7M_DCACHE=y : Data cache is enabled - CONFIG_ARMV7M_DCACHE_WRITETHROUGH=n : Write back mode + CONFIG_ARMV7M_DCACHE_WRITETHROUGH=y : Write through mode (see SDRAM discussion above) CONFIG_ARCH_FPU=y : H/W floating point support is enabled CONFIG_ARCH_DPFPU=y : 64-bit H/W floating point support is enabled |