diff options
Diffstat (limited to 'nuttx/configs/samv71-xult/README.txt')
| -rw-r--r-- | nuttx/configs/samv71-xult/README.txt | 30 |
1 files changed, 28 insertions, 2 deletions
diff --git a/nuttx/configs/samv71-xult/README.txt b/nuttx/configs/samv71-xult/README.txt index 8886aefc7..5fcb078e8 100644 --- a/nuttx/configs/samv71-xult/README.txt +++ b/nuttx/configs/samv71-xult/README.txt @@ -111,6 +111,18 @@ The BASIC nsh configuration is fully function (as desribed below under sample code and study of the data sheet, but I have not found the key to solving this. + 6. Partial support for the maXTouch Xplained Pro LCD is in place. The + ILI9488-based LCD is working well with a SMC DMA-based interface. Very + nice performance. + + However, the maXTouch touchscreen driver is not working. I tried re- + using the maXTouch driver that was used with the SAMA5D4-EK TM7000 + LCD, but the maXTouch Xplained Pro has a different maXTouch part. + The driver claims that all operations are success, but there are no + interrupts signalling touch event. I assume that the different + maXTouch part is not being configured correctly but there is no + avaiable technical documentation or sample code to debug with. + Serial Console ============== @@ -1134,9 +1146,23 @@ Configuration sub-directories CP2100CP programmable PLL, and 0x57 and 0x5f are the addresses of the AT2 EEPROM. I am not sure what the other address, 0x37, is). + 8. Support for the touchscreen test is enabled (see apps/examples/touchscreen), + however, the maXTouch is not yet working (see STATUS below). + STATUS: - 2015-03-30: Currently contains on a touchscreen test. The touchscreen - does not yet work. + 2015-04-05: Partial support for the maXTouch Xplained Pro LCD is in + place. The ILI9488-based LCD is working well with a SMC DMA-based + interface. Very nice performance. + + However, the maXTouch touchscreen driver is not working. I tried + re-using the maXTouch driver that was used with the SAMA5D4-EK + TM7000 LCD, but the maXTouch Xplained Pro has a different maXTouch + part. The driver claims that all operations are success, but + there are no interrupts signalling touch event. I assume that the + different maXTouch part is not being configured correctly but there + is no available technical documentation or sample code to debug + with. + netnsh: |