diff options
Diffstat (limited to 'nuttx/configs/stm3210e-eval/nsh2/defconfig')
| -rw-r--r-- | nuttx/configs/stm3210e-eval/nsh2/defconfig | 6 |
1 files changed, 1 insertions, 5 deletions
diff --git a/nuttx/configs/stm3210e-eval/nsh2/defconfig b/nuttx/configs/stm3210e-eval/nsh2/defconfig index e7ffc8bc6..51f8fdc70 100644 --- a/nuttx/configs/stm3210e-eval/nsh2/defconfig +++ b/nuttx/configs/stm3210e-eval/nsh2/defconfig @@ -162,7 +162,6 @@ CONFIG_STM32_I2C1=y CONFIG_STM32_I2C2=n CONFIG_STM32_USB=y CONFIG_STM32_CAN1=n -CONFIG_STM32_CAN2=n CONFIG_STM32_BKP=n CONFIG_STM32_PWR=n CONFIG_STM32_DAC=n @@ -264,8 +263,7 @@ CONFIG_STM32_R61580_DISABLE=y # # STM32F10xxx specific CAN device driver settings # -# CONFIG_CAN - Enables CAN support (one or both of CONFIG_STM32_CAN1 or -# CONFIG_STM32_CAN2 must also be defined) +# CONFIG_CAN - Enables CAN support (CONFIG_STM32_CAN1 must also be defined) # CONFIG_CAN_EXTID - Enables support for the 29-bit extended ID. Default # Standard 11-bit IDs. # CONFIG_CAN_FIFOSIZE - The size of the circular buffer of CAN messages. @@ -275,7 +273,6 @@ CONFIG_STM32_R61580_DISABLE=y # CONFIG_CAN_LOOPBACK - A CAN driver may or may not support a loopback # mode for testing. The STM32 CAN driver does support loopback mode. # CONFIG_CAN1_BAUD - CAN1 BAUD rate. Required if CONFIG_STM32_CAN1 is defined. -# CONFIG_CAN2_BAUD - CAN1 BAUD rate. Required if CONFIG_STM32_CAN2 is defined. # CONFIG_CAN_TSEG1 - The number of CAN time quanta in segment 1. Default: 6 # CONFIG_CAN_TSEG2 - the number of CAN time quanta in segment 2. Default: 7 # @@ -286,7 +283,6 @@ CONFIG_CAN_EXTID=y CONFIG_CAN_LOOPBACK=n # ISO-11783 requires the baud to be set to 250K CONFIG_CAN1_BAUD=250000 -CONFIG_CAN2_BAUD=250000 # ISO-11783 requires the sample point to be within 75 to 80% CONFIG_CAN_TSEG1=12 CONFIG_CAN_TSEG2=3 |