diff options
Diffstat (limited to 'nuttx/configs/stm3240g-eval/include')
| -rwxr-xr-x | nuttx/configs/stm3240g-eval/include/board.h | 79 |
1 files changed, 69 insertions, 10 deletions
diff --git a/nuttx/configs/stm3240g-eval/include/board.h b/nuttx/configs/stm3240g-eval/include/board.h index 6ad4736d7..f5a1ed2d5 100755 --- a/nuttx/configs/stm3240g-eval/include/board.h +++ b/nuttx/configs/stm3240g-eval/include/board.h @@ -2,7 +2,7 @@ * configs/stm3240g-eval/include/board.h * include/arch/board/board.h * - * Copyright (C) 2009 Gregory Nutt. All rights reserved. + * Copyright (C) 2011-12 Gregory Nutt. All rights reserved. * Author: Gregory Nutt <gnutt@nuttx.org> * * Redistribution and use in source and binary forms, with or without @@ -307,20 +307,79 @@ /* PWM * * The STM3240G-Eval has no real on-board PWM devices, but the board can be - * configured to output a pulse train using TIM4 CH2. This pin is used by FSMC is - * but is also connected to the Motor Control Connector (CN5) just for this - * purpose: + * configured to output a pulse train using the following: * - * PD13 FSMC_A18 / MC_TIM4_CH2OUT pin 33 (EnB) + * If FSMC is not used: + * TIM4 CH2OUT: PD13 FSMC_A18 / MC_TIM4_CH2OUT + * Daughterboard Extension Connector, CN3, pin 32 + * Motor Control Connector CN15, pin 33 -- not available unless you bridge SB14. * - * FSMC must be disabled in this case! PD13 is available at: + * TIM1 CH1OUT: PE9 FSMC_D6 + * Daughterboard Extension Connector, CN2, pin 24 * - * Daughterboard Extension Connector, CN3, pin 32 - available - * TFT LCD Connector, CN19, pin 17 -- not available without removing the LCD. - * Motor Control Connector CN15, pin 33 -- not available unless you bridge SB14. + * TIM1_CH2OUT: PE11 FSMC_D8 + * Daughterboard Extension Connector, CN2, pin 26 + * + * TIM1_CH3OUT: PE13 FSMC_D10 + * Daughterboard Extension Connector, CN2, pin 28 + * + * TIM1_CH4OUT: PE14 FSMC_D11 + * Daughterboard Extension Connector, CN2, pin 29 + * + * If OTG FS is not used + * + * TIM1_CH3OUT: PA10 OTG_FS_ID + * Daughterboard Extension Connector, CN3, pin 14 + * + * TIM1_CH4OUT: PA11 OTG_FS_DM + * Daughterboard Extension Connector, CN3, pin 11 + * + * If DMCI is not used + * + * TIM8 CH1OUT: PI5 DCMI_VSYNC & MC + * Daughterboard Extension Connector, CN4, pin 4 + * + * TIM8_CH2OUT: PI6 DCMI_D6 & MC + * Daughterboard Extension Connector, CN4, pin 3 + * + * TIM8_CH3OUT: PI7 DCMI_D7 & MC + * Daughterboard Extension Connector, CN4, pin 2 + * + * If SDIO is not used + * + * TIM8_CH3OUT: PC8 MicroSDCard_D0 & MC + * Daughterboard Extension Connector, CN3, pin 18 + * + * TIM8_CH4OUT: PC9 MicroSDCard_D1 & I2S_CKIN (JP16) + * Daughterboard Extension Connector, CN3, pin 15 + * + * Others + * + * TIM8 CH1OUT: PC6 I2S_MCK & Smartcard_IO (JP21 open) */ -#define GPIO_TIM4_CH2OUT GPIO_TIM4_CH2OUT_2 +#if !defined(CONFIG_STM32_FSMC) +# define GPIO_TIM4_CH2OUT GPIO_TIM4_CH2OUT_2 +# define GPIO_TIM1_CH1OUT GPIO_TIM1_CH1OUT_2 +# define GPIO_TIM1_CH2OUT GPIO_TIM1_CH2OUT_2 +# define GPIO_TIM1_CH3OUT GPIO_TIM1_CH3OUT_2 +# define GPIO_TIM1_CH4OUT GPIO_TIM1_CH4OUT_2 +#elif !defined(CONFIG_STM32_OTGFS) +# define GPIO_TIM1_CH3OUT GPIO_TIM1_CH3OUT_1 +# define GPIO_TIM1_CH4OUT GPIO_TIM1_CH4OUT_1 +#endif + +#if !defined(CONFIG_STM32_DCMI) +# define GPIO_TIM8_CH1OUT GPIO_TIM8_CH1OUT_2 +# define GPIO_TIM8_CH2OUT GPIO_TIM8_CH2OUT_2 +# define GPIO_TIM8_CH3OUT GPIO_TIM8_CH3OUT_2 +#else +# define GPIO_TIM8_CH1OUT GPIO_TIM8_CH1OUT_1 +# if !defined(CONFIG_STM32_SDIO) +# define GPIO_TIM8_CH3OUT GPIO_TIM8_CH3OUT_1 +# define GPIO_TIM8_CH4OUT GPIO_TIM8_CH4OUT_1 +# endif +#endif /* CAN * |