3 files changed, 99 insertions, 100 deletions
diff --git a/nuttx/configs/stm32_tiny/src/up_boot.c b/nuttx/configs/stm32_tiny/src/up_boot.c
index a4f302339..525cae8fa 100644
--- a/nuttx/configs/stm32_tiny/src/up_boot.c
+++ b/nuttx/configs/stm32_tiny/src/up_boot.c
@@ -1,97 +1,96 @@
-/************************************************************************************
- * configs/stm32_tiny/src/up_boot.c
- *
- *   Copyright (C) 2009, 2011, 2013 Gregory Nutt. All rights reserved.
- *   Author: Gregory Nutt <gnutt@nuttx.org>
- *           Laurent Latil <laurent@latil.nom.fr>
- *
- * Redistribution and use in source and binary forms, with or without
- * modification, are permitted provided that the following conditions
- * are met:
- *
- * 1. Redistributions of source code must retain the above copyright
- *    notice, this list of conditions and the following disclaimer.
- * 2. Redistributions in binary form must reproduce the above copyright
- *    notice, this list of conditions and the following disclaimer in
- *    the documentation and/or other materials provided with the
- *    distribution.
- * 3. Neither the name NuttX nor the names of its contributors may be
- *    used to endorse or promote products derived from this software
- *    without specific prior written permission.
- *
- * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
- * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
- * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
- * FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE
- * COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
- * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING,
- * BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS
- * OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED
- * AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
- * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
- * ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
- * POSSIBILITY OF SUCH DAMAGE.
- *
- ************************************************************************************/
-
-/************************************************************************************
- * Included Files
- ************************************************************************************/
-
-#include <nuttx/config.h>
-#include <nuttx/spi.h>
-#include <debug.h>
-
-#include <arch/board/board.h>
-
-#include "up_arch.h"
-#include "stm32_tiny-internal.h"
-
-/************************************************************************************
- * Definitions
- ************************************************************************************/
-
-/************************************************************************************
- * Private Data
- ************************************************************************************/
-
-/************************************************************************************
- * Public Functions
- ************************************************************************************/
-
-/************************************************************************************
- * Name: stm32_boardinitialize
- *
- * Description:
- *   All STM32 architectures must provide the following entry point.  This entry point
- *   is called early in the initialization -- after all memory has been configured
- *   and mapped but before any devices have been initialized.
- *
- ************************************************************************************/
-
-void stm32_boardinitialize(void)
-{
-  /* Configure on-board LEDs if LED support has been selected. */
-
-#ifdef CONFIG_ARCH_LEDS
-  up_ledinit();
-#endif
-
-  /* Configure SPI chip selects if 1) SPI is not disabled, and 2) the weak function
-   * stm32_spiinitialize() has been brought into the link.
-   */
-
-#if defined(CONFIG_STM32_SPI1) || defined(CONFIG_STM32_SPI2)
-  stm32_spiinitialize();
-#endif
-
-   /* Initialize USB is 1) USBDEV is selected, 2) the USB controller is not
-    * disabled, and 3) the weak function stm32_usbinitialize() has been brought
-    * into the build.
-    */
-
-#if defined(CONFIG_USBDEV) && defined(CONFIG_STM32_USB)
-  stm32_usbinitialize();
-#endif
-
-}
+/************************************************************************************
+ * configs/stm32_tiny/src/up_boot.c
+ *
+ *   Copyright (C) 2009, 2011, 2013 Gregory Nutt. All rights reserved.
+ *   Author: Gregory Nutt <gnutt@nuttx.org>
+ *           Laurent Latil <laurent@latil.nom.fr>
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions
+ * are met:
+ *
+ * 1. Redistributions of source code must retain the above copyright
+ *    notice, this list of conditions and the following disclaimer.
+ * 2. Redistributions in binary form must reproduce the above copyright
+ *    notice, this list of conditions and the following disclaimer in
+ *    the documentation and/or other materials provided with the
+ *    distribution.
+ * 3. Neither the name NuttX nor the names of its contributors may be
+ *    used to endorse or promote products derived from this software
+ *    without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
+ * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
+ * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
+ * FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE
+ * COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
+ * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING,
+ * BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS
+ * OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED
+ * AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
+ * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
+ * ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
+ * POSSIBILITY OF SUCH DAMAGE.
+ *
+ ************************************************************************************/
+
+/************************************************************************************
+ * Included Files
+ ************************************************************************************/
+
+#include <nuttx/config.h>
+#include <nuttx/spi/spi.h>
+#include <debug.h>
+
+#include <arch/board/board.h>
+
+#include "up_arch.h"
+#include "stm32_tiny-internal.h"
+
+/************************************************************************************
+ * Definitions
+ ************************************************************************************/
+
+/************************************************************************************
+ * Private Data
+ ************************************************************************************/
+
+/************************************************************************************
+ * Public Functions
+ ************************************************************************************/
+
+/************************************************************************************
+ * Name: stm32_boardinitialize
+ *
+ * Description:
+ *   All STM32 architectures must provide the following entry point.  This entry point
+ *   is called early in the initialization -- after all memory has been configured
+ *   and mapped but before any devices have been initialized.
+ *
+ ************************************************************************************/
+
+void stm32_boardinitialize(void)
+{
+  /* Configure on-board LEDs if LED support has been selected. */
+
+#ifdef CONFIG_ARCH_LEDS
+  up_ledinit();
+#endif
+
+  /* Configure SPI chip selects if 1) SPI is not disabled, and 2) the weak function
+   * stm32_spiinitialize() has been brought into the link.
+   */
+
+#if defined(CONFIG_STM32_SPI1) || defined(CONFIG_STM32_SPI2)
+  stm32_spiinitialize();
+#endif
+
+   /* Initialize USB is 1) USBDEV is selected, 2) the USB controller is not
+    * disabled, and 3) the weak function stm32_usbinitialize() has been brought
+    * into the build.
+    */
+
+#if defined(CONFIG_USBDEV) && defined(CONFIG_STM32_USB)
+  stm32_usbinitialize();
+#endif
+}
diff --git a/nuttx/configs/stm32_tiny/src/up_spi.c b/nuttx/configs/stm32_tiny/src/up_spi.c
index ce41670ae..e79361857 100644
--- a/nuttx/configs/stm32_tiny/src/up_spi.c
+++ b/nuttx/configs/stm32_tiny/src/up_spi.c
@@ -44,7 +44,7 @@
 #include <stdbool.h>
 #include <debug.h>
 
-#include <nuttx/spi.h>
+#include <nuttx/spi/spi.h>
 #include <arch/board/board.h>
 
 #include "up_arch.h"
@@ -117,7 +117,7 @@ void stm32_spiinitialize(void)
  *   The external functions, stm32_spi1/2/3select and stm32_spi1/2/3status must be
  *   provided by board-specific logic.  They are implementations of the select
  *   and status methods of the SPI interface defined by struct spi_ops_s (see
- *   include/nuttx/spi.h). All other methods (including up_spiinitialize())
+ *   include/nuttx/spi/spi.h). All other methods (including up_spiinitialize())
  *   are provided by common STM32 logic.  To use this common SPI logic on your
  *   board:
  *
diff --git a/nuttx/configs/stm32_tiny/src/up_wireless.c b/nuttx/configs/stm32_tiny/src/up_wireless.c
index 7e0c9f5bf..59ec00347 100644
--- a/nuttx/configs/stm32_tiny/src/up_wireless.c
+++ b/nuttx/configs/stm32_tiny/src/up_wireless.c
@@ -44,7 +44,7 @@
 #include <debug.h>
 #include <errno.h>
 
-#include <nuttx/spi.h>
+#include <nuttx/spi/spi.h>
 #include <nuttx/wireless/nrf24l01.h>
 #include <arch/board/board.h>