diff options
Diffstat (limited to 'nuttx/configs')
-rw-r--r-- | nuttx/configs/vsn/include/board.h | 33 | ||||
-rw-r--r-- | nuttx/configs/vsn/include/power.h | 71 | ||||
-rwxr-xr-x | nuttx/configs/vsn/nsh/defconfig | 45 | ||||
-rw-r--r-- | nuttx/configs/vsn/src/README.txt | 10 | ||||
-rw-r--r-- | nuttx/configs/vsn/src/boot.c | 216 | ||||
-rw-r--r-- | nuttx/configs/vsn/src/leds.c | 18 | ||||
-rw-r--r-- | nuttx/configs/vsn/src/power.c | 48 | ||||
-rw-r--r-- | nuttx/configs/vsn/src/ramtron.c | 7 | ||||
-rw-r--r-- | nuttx/configs/vsn/src/sysclock.c | 13 | ||||
-rw-r--r-- | nuttx/configs/vsn/src/vsn.h | 276 |
10 files changed, 450 insertions, 287 deletions
diff --git a/nuttx/configs/vsn/include/board.h b/nuttx/configs/vsn/include/board.h index f4ad540c7..5c07f075e 100644 --- a/nuttx/configs/vsn/include/board.h +++ b/nuttx/configs/vsn/include/board.h @@ -1,5 +1,5 @@ /************************************************************************************ - * configs/vsn-1.2/include/board.h + * configs/vsn/include/board.h * include/arch/board/board.h * * Copyright (C) 2009 Gregory Nutt. All rights reserved. @@ -183,10 +183,11 @@ extern "C" { #endif /************************************************************************************ - * Public Function Prototypes + * Board Clock Configuration, called immediatelly after boot ************************************************************************************/ - EXTERN void stm32_board_clockconfig(void); +EXTERN void stm32_board_clockconfig(void); + /************************************************************************************ * Name: stm32_boardinitialize @@ -200,15 +201,9 @@ extern "C" { EXTERN void stm32_boardinitialize(void); + /************************************************************************************ - * Button support. - * - * Description: - * up_buttoninit() must be called to initialize button resources. After that, - * up_buttons() may be called to collect the state of all buttons. up_buttons() - * returns an 8-bit bit set with each bit associated with a button. See the - * BUTTON_* and JOYSTICK_* definitions above for the meaning of each bit. - * + * Button support. (TODO: button is not yet supported) ************************************************************************************/ #ifdef CONFIG_ARCH_BUTTONS @@ -216,11 +211,25 @@ EXTERN void up_buttoninit(void); EXTERN uint8_t up_buttons(void); #endif -/* Other peripherals startup routines, all returning OK on success */ + +/************************************************************************************ + * Memories + * - SDcard is tested to work up to 2 GB + * - RAMTRON has size of 128 kB + ************************************************************************************/ + EXTERN int up_sdcard(void); EXTERN int up_ramtron(void); +/************************************************************************************ + * Public Power Supply Contol + ************************************************************************************/ + +void board_power_reboot(void); +void board_power_off(void); + + #undef EXTERN #if defined(__cplusplus) } diff --git a/nuttx/configs/vsn/include/power.h b/nuttx/configs/vsn/include/power.h new file mode 100644 index 000000000..960c40fb1 --- /dev/null +++ b/nuttx/configs/vsn/include/power.h @@ -0,0 +1,71 @@ +/************************************************************************************
+ * configs/vsn/include/power.h
+ * include/arch/board/power.h
+ *
+ * Copyright (C) 2011 Uros Platise. All rights reserved
+ *
+ * Authors: Uros Platise <uros.platise@isotel.eu>
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions
+ * are met:
+ *
+ * 1. Redistributions of source code must retain the above copyright
+ * notice, this list of conditions and the following disclaimer.
+ * 2. Redistributions in binary form must reproduce the above copyright
+ * notice, this list of conditions and the following disclaimer in
+ * the documentation and/or other materials provided with the
+ * distribution.
+ * 3. Neither the name NuttX nor the names of its contributors may be
+ * used to endorse or promote products derived from this software
+ * without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
+ * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
+ * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
+ * FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE
+ * COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
+ * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING,
+ * BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS
+ * OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED
+ * AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
+ * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
+ * ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
+ * POSSIBILITY OF SUCH DAMAGE.
+ *
+ ************************************************************************************/
+
+#ifndef __ARCH_BOARD_POWER_H
+#define __ARCH_BOARD_POWER_H
+
+
+/************************************************************************************
+ * Included Files
+ ************************************************************************************/
+
+#ifndef __ASSEMBLY__
+#undef EXTERN
+#if defined(__cplusplus)
+#define EXTERN extern "C"
+extern "C" {
+#else
+#define EXTERN extern
+#endif
+
+/************************************************************************************
+ * Public Power Supply Contol
+ ************************************************************************************/
+
+void board_power_reboot(void);
+
+/* If this function returns, it means, that it was not possible to power-off the board */
+void board_power_off(void);
+
+
+#undef EXTERN
+#if defined(__cplusplus)
+}
+#endif
+
+#endif /* __ASSEMBLY__ */
+#endif /* __ARCH_BOARD_POWER_H */
diff --git a/nuttx/configs/vsn/nsh/defconfig b/nuttx/configs/vsn/nsh/defconfig index e6503f376..0f9496997 100755 --- a/nuttx/configs/vsn/nsh/defconfig +++ b/nuttx/configs/vsn/nsh/defconfig @@ -819,34 +819,49 @@ CONFIG_HEAP_SIZE= ######################################################################## +# STM32 JTAG Options +# +# Full JTAG Enable (Parallel and Serial) +CONFIG_STM32_JTAG_FULL_ENABLE=n + +# Full but without the JNTRST pin +CONFIG_STM32_JTAG_NOJNTRST_ENABLE=n + +# Serial (SWJ) dual pin only which, can coexist besides the FRAM on SPI3 +CONFIG_STM32_JTAG_SW_ENABLE=n + + +######################################################################## # # Applications to be included within the NuttX binary as described -# under the apps/README.txt +# under the ../apps/README.txt # -# Set this config parameter above to: CONFIG_TASK_NAME_SIZE=16 -# in order to enable argv[0]=<task name> argument. Otherwise argv[0] -# will be noname. +# Set thi config parameter above to: CONFIG_TASK_NAME_SIZE=16 +# In order to enable argv[0]=<task name> argument set the option +# CONFIG_TASK_NAME_SIZE=16 # -# Include builtin NuttX application (disabling this option will -# exclude all of the apps found under the nuttx/apps directory, but -# not the apps found under the ../apps directory unless _APPS_USER=n. +# Include builtin NuttX applications (general option) CONFIG_BUILTIN_APPS_NUTTX=y +# Invoke the following application after NuttX starts +#CONFIG_BUILTIN_APP_START="hello" + # Individual selection of built-in applications: + +# Hello world provide a simple skeleton/demo application CONFIG_BUILTIN_APPS_HELLO=y -# Include user (external) applications located under ../apps directory? -CONFIG_BUILTIN_APPS_USER=y +# Provide poweroff command to switch off the board +CONFIG_BUILTIN_APPS_POWEROFF=y -# Invoke the following application after NuttX starts -# (enter app name, as: hello) -CONFIG_BUILTIN_APP_START= +# Provide JAVA Virtual Machine (the Darjeeling JVM) +CONFIG_BUILTIN_APPS_JVM=n -# CONFIG_EXAMPLES_NSH_BUILTIN_APPS - Support for running the builtin -# apps from command line. See apps/README for more information. +# CONFIG_EXAMPLES_NSH_BUILTIN_APPS - Enable invocation of all builtin +# apps from nsh command line. See apps/README for more information. # CONFIG_EXAMPLES_NSH_BUILTIN_APPS=y -CONFIG_SCHED_WAITPID=y + CONFIG_SCHED_WAITPID=y # ######################################################################## diff --git a/nuttx/configs/vsn/src/README.txt b/nuttx/configs/vsn/src/README.txt index bacf82c17..f08e8fe06 100644 --- a/nuttx/configs/vsn/src/README.txt +++ b/nuttx/configs/vsn/src/README.txt @@ -10,3 +10,13 @@ Execution starts in the following order: - boot, performs initial chip and board initialization - ... - nsh, as central application last. + + + + +JTAG options: +============= + +CONFIG_STM32_JTAG_FULL_ENABLE // Complete parallel and serial +CONFIG_STM32_JTAG_NOJNTRST_ENABLE // no JNTRST pin +CONFIG_STM32_JTAG_SW_ENABLE // serial (dual pin) only (can coexist besides the FRAM on SPI3) diff --git a/nuttx/configs/vsn/src/boot.c b/nuttx/configs/vsn/src/boot.c index 2f959333d..eb4ba9ef5 100644 --- a/nuttx/configs/vsn/src/boot.c +++ b/nuttx/configs/vsn/src/boot.c @@ -1,112 +1,104 @@ -/************************************************************************************
- * configs/vsn/src/boot.c
- * arch/arm/src/board/boot.c
- *
- * Copyright (C) 2009 Gregory Nutt. All rights reserved.
- * Copyright (c) 2011 Uros Platise. All rights reserved.
- *
- * Authors: Gregory Nutt <spudmonkey@racsa.co.cr>
- * Uros Platise <uros.platise@isotel.eu>
- *
- * Redistribution and use in source and binary forms, with or without
- * modification, are permitted provided that the following conditions
- * are met:
- *
- * 1. Redistributions of source code must retain the above copyright
- * notice, this list of conditions and the following disclaimer.
- * 2. Redistributions in binary form must reproduce the above copyright
- * notice, this list of conditions and the following disclaimer in
- * the documentation and/or other materials provided with the
- * distribution.
- * 3. Neither the name NuttX nor the names of its contributors may be
- * used to endorse or promote products derived from this software
- * without specific prior written permission.
- *
- * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
- * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
- * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
- * FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE
- * COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
- * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING,
- * BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS
- * OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED
- * AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
- * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
- * ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
- * POSSIBILITY OF SUCH DAMAGE.
- *
- ************************************************************************************/
-
-/************************************************************************************
- * Included Files
- ************************************************************************************/
-
-#include <nuttx/config.h>
-
-#include <debug.h>
-
-#include <arch/board/board.h>
-
-#include "stm32_gpio.h"
-#include "up_arch.h"
-#include "vsn.h"
-
-/************************************************************************************
- * Definitions
- ************************************************************************************/
-
-/************************************************************************************
- * Private Functions
- ************************************************************************************/
-
-/************************************************************************************
- * Public Functions
- ************************************************************************************/
-
-/************************************************************************************
- * Name: stm32_boardinitialize
- *
- * Description:
- * All STM32 architectures must provide the following entry point. This entry point
- * is called early in the intitialization -- after all memory has been configured
- * and mapped but before any devices have been initialized.
- *
- ************************************************************************************/
-
-void stm32_boardinitialize(void)
-{
-#ifdef CONFIG_STM32_SPI3
-#warning JTAG Port Disabled as SPI3 NVRAM/FRAM support is enabled
-
- uint32_t val = getreg32(STM32_AFIO_MAPR);
- val &= 0x00FFFFFF; // clear undefined readings ...
- val |= AFIO_MAPR_DISAB; // set JTAG-DP and SW-DP Disabled
- putreg32(val, STM32_AFIO_MAPR);
-#endif
-
- // Set Board Voltage to 3.3 V
- board_power_setbootvoltage();
-
- /* Configure SPI chip selects if 1) SPI is not disabled, and 2) the weak function
- * stm32_spiinitialize() has been brought into the link.
- */
-
-#if defined(CONFIG_STM32_SPI1) || defined(CONFIG_STM32_SPI2) || defined(CONFIG_STM32_SPI3)
- if (stm32_spiinitialize) stm32_spiinitialize();
-#endif
-
- /* Initialize USB is 1) USBDEV is selected, 2) the USB controller is not
- * disabled, and 3) the weak function stm32_usbinitialize() has been brought
- * into the build.
- */
-
-#if defined(CONFIG_USBDEV) && defined(CONFIG_STM32_USB)
- if (stm32_usbinitialize) stm32_usbinitialize();
-#endif
-
- /* Configure on-board LEDs if LED support has been selected. */
-
-#ifdef CONFIG_ARCH_LEDS
- up_ledinit();
-#endif
-}
+/************************************************************************************ + * configs/vsn/src/boot.c + * arch/arm/src/board/boot.c + * + * Copyright (C) 2009 Gregory Nutt. All rights reserved. + * Copyright (c) 2011 Uros Platise. All rights reserved. + * + * Authors: Gregory Nutt <spudmonkey@racsa.co.cr> + * Uros Platise <uros.platise@isotel.eu> + * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions + * are met: + * + * 1. Redistributions of source code must retain the above copyright + * notice, this list of conditions and the following disclaimer. + * 2. Redistributions in binary form must reproduce the above copyright + * notice, this list of conditions and the following disclaimer in + * the documentation and/or other materials provided with the + * distribution. + * 3. Neither the name NuttX nor the names of its contributors may be + * used to endorse or promote products derived from this software + * without specific prior written permission. + * + * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS + * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT + * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS + * FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE + * COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, + * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, + * BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS + * OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED + * AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT + * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN + * ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE + * POSSIBILITY OF SUCH DAMAGE. + * + ************************************************************************************/ + +/************************************************************************************ + * Included Files + ************************************************************************************/ + +#include <nuttx/config.h> + +#include <debug.h> + +#include <arch/board/board.h> + +#include "stm32_gpio.h" +#include "up_arch.h" +#include "vsn.h" + +/************************************************************************************ + * Definitions + ************************************************************************************/ + +/************************************************************************************ + * Private Functions + ************************************************************************************/ + +/************************************************************************************ + * Public Functions + ************************************************************************************/ + +/************************************************************************************ + * Name: stm32_boardinitialize + * + * Description: + * All STM32 architectures must provide the following entry point. This entry point + * is called early in the intitialization -- after all memory has been configured + * and mapped but before any devices have been initialized. + * + ************************************************************************************/ + +void stm32_boardinitialize(void) +{ + /* Set start-up board voltage */ + + board_power_init(); + + /* Configure SPI chip selects if 1) SPI is not disabled, and 2) the weak function + * stm32_spiinitialize() has been brought into the link. + */ + +#if defined(CONFIG_STM32_SPI1) || defined(CONFIG_STM32_SPI2) || defined(CONFIG_STM32_SPI3) + if (stm32_spiinitialize) stm32_spiinitialize(); +#endif + + /* Initialize USB is 1) USBDEV is selected, 2) the USB controller is not + * disabled, and 3) the weak function stm32_usbinitialize() has been brought + * into the build. + */ + +#if defined(CONFIG_USBDEV) && defined(CONFIG_STM32_USB) + if (stm32_usbinitialize) stm32_usbinitialize(); +#endif + + /* Configure on-board LEDs if LED support has been selected. */ + +#ifdef CONFIG_ARCH_LEDS + up_ledinit(); +#endif +} diff --git a/nuttx/configs/vsn/src/leds.c b/nuttx/configs/vsn/src/leds.c index ef3c87144..c1cc1c573 100644 --- a/nuttx/configs/vsn/src/leds.c +++ b/nuttx/configs/vsn/src/leds.c @@ -43,13 +43,17 @@ #include <nuttx/config.h> +#include <arch/board/board.h> +#include <arch/stm32/irq.h> + #include <stdint.h> #include <stdbool.h> #include <debug.h> -#include <arch/board/board.h> +#include "up_arch.h" #include "vsn.h" + /**************************************************************************** * Definitions ****************************************************************************/ @@ -72,6 +76,8 @@ /**************************************************************************** * Private Data ****************************************************************************/ + +irqstate_t irqidle_mask; /**************************************************************************** * Private Functions @@ -101,7 +107,10 @@ void up_ledinit(void) void up_ledon(int led) { - if (led==LED_IDLE) stm32_gpiowrite(GPIO_LED, true); + if (led==LED_IDLE) { + irqidle_mask = irqsave(); + stm32_gpiowrite(GPIO_LED, true); + } } /**************************************************************************** @@ -110,7 +119,10 @@ void up_ledon(int led) void up_ledoff(int led) { - if (led==LED_IDLE) stm32_gpiowrite(GPIO_LED, false); + if (led==LED_IDLE) { + stm32_gpiowrite(GPIO_LED, false); + irqrestore(irqidle_mask); + } } #endif /* CONFIG_ARCH_LEDS */ diff --git a/nuttx/configs/vsn/src/power.c b/nuttx/configs/vsn/src/power.c index 2e23ed033..c7c73448a 100644 --- a/nuttx/configs/vsn/src/power.c +++ b/nuttx/configs/vsn/src/power.c @@ -1,6 +1,6 @@ /**************************************************************************** - * config/vsn/src/ramtron.c - * arch/arm/src/board/ramtron.c + * config/vsn/src/power.c + * arch/arm/src/board/power.c * * Copyright (C) 2011 Uros Platise. All rights reserved. * @@ -37,21 +37,57 @@ #include <nuttx/config.h> +#include <arch/board/board.h> +#include <arch/stm32/irq.h> + #include <stdint.h> #include <stdbool.h> #include <debug.h> -#include <arch/board/board.h> +#include "stm32_gpio.h" #include "vsn.h" +#include "up_arch.h" + void board_power_register(void); void board_power_adjust(void); void board_power_status(void); -void board_power_setbootvoltage(void) + + +void board_power_init(void) { stm32_configgpio(GPIO_PVS); + stm32_configgpio(GPIO_PST); + stm32_configgpio(GPIO_XPWR); + stm32_configgpio(GPIO_SCTC); + stm32_configgpio(GPIO_PCLR); +} + + +void board_power_reboot(void) +{ + // low-level board reset (not just MCU reset) + // if external power is present, stimulate power-off as board + // will wake-up immediatelly, if power is not present, set an alarm + // before power off the board. } -void board_power_reboot(void); -void board_power_off(void); + +void board_power_off(void) +{ + // Check if external supply is not present, otherwise return + // notifying that it is not possible to power-off the board + + // \todo + + // stop backgorund processes + irqsave(); + + // switch to internal HSI and get the PD0 and PD1 as GPIO + stm32_board_select_hsi(); + + // trigger shutdown with pull-up resistor (not push-pull!) and wait. + stm32_gpiowrite(GPIO_PCLR, true); + for(;;); +} diff --git a/nuttx/configs/vsn/src/ramtron.c b/nuttx/configs/vsn/src/ramtron.c index 24f43d0ff..01cf93311 100644 --- a/nuttx/configs/vsn/src/ramtron.c +++ b/nuttx/configs/vsn/src/ramtron.c @@ -61,6 +61,11 @@ int up_ramtron(void) int retval; /* Get the SPI port */ + +#if defined(CONFIG_STM32_JTAG_FULL_ENABLE) || defined(CONFIG_STM32_JTAG_NOJNTRST_ENABLE) + message("RAMTRON: Cannot open SPI3 port as JTAG is enabled. Switch to Serial JTAG mode.\n"); + return -ENODEV; +#endif spi = up_spiinitialize(3); if (!spi) @@ -70,7 +75,7 @@ int up_ramtron(void) } message("RAMTRON: Initialized SPI3\n"); - mtd = ramtron_initialize(spi); + mtd = (struct mtd_dev_s *)ramtron_initialize(spi); if (!mtd) { message("RAMTRON: Device not found\n"); diff --git a/nuttx/configs/vsn/src/sysclock.c b/nuttx/configs/vsn/src/sysclock.c index f812dd2c1..79cc80ff2 100644 --- a/nuttx/configs/vsn/src/sysclock.c +++ b/nuttx/configs/vsn/src/sysclock.c @@ -39,6 +39,7 @@ #include <arch/board/board.h> #include "stm32_rcc.h" +#include "stm32_gpio.h" #include "stm32_flash.h" #include "up_internal.h" #include "up_arch.h" @@ -123,6 +124,11 @@ void stm32_board_select_hsi(void) // Wait until the selected source is used as the system clock source while ((getreg32(STM32_RCC_CFGR) & RCC_CFGR_SWS_MASK) != STM32_SYSCLK_SWS); + + // map port PD0 and PD1 on OSC pins + regval = getreg32(STM32_AFIO_MAPR); + regval |= AFIO_MAPR_PD01_REMAP; + putreg32(regval, STM32_AFIO_MAPR); } @@ -140,6 +146,13 @@ void stm32_board_select_hsi(void) */ int stm32_board_select_hse(void) { + uint32_t regval; + + // be sure to release PD0 and PD1 pins from the OSC pins + regval = getreg32(STM32_AFIO_MAPR); + regval &= ~AFIO_MAPR_PD01_REMAP; + putreg32(regval, STM32_AFIO_MAPR); + // if (is cc1101 9 MHz clock output enabled), otherwise return with -1 // I think that clock register provides HSE valid signal to detect that as well. diff --git a/nuttx/configs/vsn/src/vsn.h b/nuttx/configs/vsn/src/vsn.h index c065e1e75..33282c5a1 100644 --- a/nuttx/configs/vsn/src/vsn.h +++ b/nuttx/configs/vsn/src/vsn.h @@ -1,138 +1,138 @@ -/************************************************************************************
- * configs/vsn/src/vsn.h
- * arch/arm/src/board/vsn.n
- *
- * Copyright (C) 2009 Gregory Nutt. All rights reserved.
- * Copyright (c) 2011 Uros Platise. All rights reserved.
- *
- * Authors: Gregory Nutt <spudmonkey@racsa.co.cr>
- * Uros Platise <uros.platise@isotel.eu>
- *
- * Redistribution and use in source and binary forms, with or without
- * modification, are permitted provided that the following conditions
- * are met:
- *
- * 1. Redistributions of source code must retain the above copyright
- * notice, this list of conditions and the following disclaimer.
- * 2. Redistributions in binary form must reproduce the above copyright
- * notice, this list of conditions and the following disclaimer in
- * the documentation and/or other materials provided with the
- * distribution.
- * 3. Neither the name NuttX nor the names of its contributors may be
- * used to endorse or promote products derived from this software
- * without specific prior written permission.
- *
- * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
- * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
- * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
- * FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE
- * COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
- * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING,
- * BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS
- * OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED
- * AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
- * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
- * ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
- * POSSIBILITY OF SUCH DAMAGE.
- *
- ************************************************************************************/
-
-#ifndef __CONFIGS_VSN_1_2_SRC_VSN_INTERNAL_H
-#define __CONFIGS_VSN_1_2_SRC_VSN_INTERNAL_H
-
-/************************************************************************************
- * Included Files
- ************************************************************************************/
-
-#include <arch/board/board.h>
-#include <nuttx/config.h>
-#include <nuttx/compiler.h>
-#include <stdint.h>
-
-/************************************************************************************
- * Definitions
- ************************************************************************************/
-
-/* LED */
-
-#define GPIO_LED (GPIO_OUTPUT|GPIO_CNF_OUTPP|GPIO_MODE_2MHz|GPIO_OUTPUT_CLEAR|GPIO_PORTB|GPIO_PIN2)
-
-/* BUTTON - Note that after a good second button causes hardware reset */
-
-#define GPIO_PUSHBUTTON (GPIO_INPUT|GPIO_CNF_INFLOAT|GPIO_MODE_INPUT|GPIO_PORTC|GPIO_PIN5)
-
-/* Power Management Pins */
-
-#define GPIO_PVS (GPIO_OUTPUT|GPIO_CNF_OUTPP|GPIO_MODE_2MHz|GPIO_OUTPUT_CLEAR|GPIO_PORTC|GPIO_PIN7)
-
-/* FRAM */
-
-#define GPIO_FRAM_CS (GPIO_OUTPUT|GPIO_CNF_OUTPP|GPIO_MODE_50MHz|GPIO_OUTPUT_SET|GPIO_PORTA|GPIO_PIN15)
-
-
-/* Debug ********************************************************************/
-
-#ifdef CONFIG_CPP_HAVE_VARARGS
-# ifdef CONFIG_DEBUG
-# define message(...) lib_lowprintf(__VA_ARGS__)
-# else
-# define message(...) printf(__VA_ARGS__)
-# endif
-#else
-# ifdef CONFIG_DEBUG
-# define message lib_lowprintf
-# else
-# define message printf
-# endif
-#endif
-
-
-/************************************************************************************
- * Public Types
- ************************************************************************************/
-
-/************************************************************************************
- * Public data
- ************************************************************************************/
-
-#ifndef __ASSEMBLY__
-
-/************************************************************************************
- * Public Functions
- ************************************************************************************/
-
-/************************************************************************************
- * Name: stm32_spiinitialize
- *
- * Description:
- * Called to configure SPI chip select GPIO pins for the VSN board.
- *
- ************************************************************************************/
-
-extern void weak_function stm32_spiinitialize(void);
-
-/************************************************************************************
- * Name: stm32_usbinitialize
- *
- * Description:
- * Called to setup USB-related GPIO pins for the VSN board.
- *
- ************************************************************************************/
-
-extern void weak_function stm32_usbinitialize(void);
-
-
-/************************************************************************************
- * Power Module
- *
- * Description:
- * - Provides power related board operations, such as voltage selection,
- * proper reboot sequence, and power-off
- ************************************************************************************/
-
-extern void board_power_setbootvoltage(void); // Default voltage at boot time
-
-
-#endif /* __ASSEMBLY__ */
-#endif /* __CONFIGS_VSN_1_2_SRC_VSN_INTERNAL_H */
-
+/************************************************************************************ + * configs/vsn/src/vsn.h + * arch/arm/src/board/vsn.n + * + * Copyright (C) 2009 Gregory Nutt. All rights reserved. + * Copyright (c) 2011 Uros Platise. All rights reserved. + * + * Authors: Gregory Nutt <spudmonkey@racsa.co.cr> + * Uros Platise <uros.platise@isotel.eu> + * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions + * are met: + * + * 1. Redistributions of source code must retain the above copyright + * notice, this list of conditions and the following disclaimer. + * 2. Redistributions in binary form must reproduce the above copyright + * notice, this list of conditions and the following disclaimer in + * the documentation and/or other materials provided with the + * distribution. + * 3. Neither the name NuttX nor the names of its contributors may be + * used to endorse or promote products derived from this software + * without specific prior written permission. + * + * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS + * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT + * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS + * FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE + * COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, + * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, + * BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS + * OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED + * AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT + * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN + * ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE + * POSSIBILITY OF SUCH DAMAGE. + * + ************************************************************************************/ + +#ifndef __CONFIGS_VSN_1_2_SRC_VSN_INTERNAL_H +#define __CONFIGS_VSN_SRC_VSN_INTERNAL_H + +/************************************************************************************ + * Included Files + ************************************************************************************/ + +#include <arch/board/board.h> +#include <nuttx/config.h> +#include <nuttx/compiler.h> +#include <stdint.h> + +/************************************************************************************ + * Definitions + ************************************************************************************/ + +/* LED */ + +#define GPIO_LED (GPIO_OUTPUT|GPIO_CNF_OUTPP |GPIO_MODE_2MHz |GPIO_PORTB|GPIO_PIN2 |GPIO_OUTPUT_CLEAR) + +/* BUTTON - Note that after a good second button causes hardware reset */ + +#define GPIO_PUSHBUTTON (GPIO_INPUT |GPIO_CNF_INFLOAT |GPIO_MODE_INPUT|GPIO_PORTC|GPIO_PIN5 ) + +/* Power Management Pins */ + +#define GPIO_PVS (GPIO_OUTPUT|GPIO_CNF_OUTPP |GPIO_MODE_2MHz |GPIO_PORTC|GPIO_PIN7 |GPIO_OUTPUT_CLEAR) +#define GPIO_PST (GPIO_INPUT |GPIO_CNF_INPULLDWN|GPIO_MODE_INPUT|GPIO_PORTC|GPIO_PIN13) +#define GPIO_SCTC (GPIO_INPUT |GPIO_CNF_INPULLDWN|GPIO_MODE_INPUT|GPIO_PORTA|GPIO_PIN8 ) +#define GPIO_PCLR (GPIO_INPUT |GPIO_CNF_INPULLDWN|GPIO_MODE_INPUT|GPIO_PORTD|GPIO_PIN1 ) // by default this pin is OSCOUT, requires REMAP +#define GPIO_XPWR (GPIO_INPUT |GPIO_CNF_INFLOAT |GPIO_MODE_INPUT|GPIO_PORTC|GPIO_PIN4 ) + +/* FRAM */ + +#define GPIO_FRAM_CS (GPIO_OUTPUT|GPIO_CNF_OUTPP |GPIO_MODE_50MHz|GPIO_PORTA|GPIO_PIN15|GPIO_OUTPUT_SET) + + +/* Debug ********************************************************************/ + +#ifdef CONFIG_CPP_HAVE_VARARGS +# ifdef CONFIG_DEBUG +# define message(...) lib_lowprintf(__VA_ARGS__) +# else +# define message(...) printf(__VA_ARGS__) +# endif +#else +# ifdef CONFIG_DEBUG +# define message lib_lowprintf +# else +# define message printf +# endif +#endif + + +/************************************************************************************ + * Public Types + ************************************************************************************/ + +/************************************************************************************ + * Public data + ************************************************************************************/ + +#ifndef __ASSEMBLY__ + +/************************************************************************************ + * Public Functions + ************************************************************************************/ + +/************************************************************************************ + * Name: stm32_spiinitialize + * + * Description: + * Called to configure SPI chip select GPIO pins for the VSN board. + * + ************************************************************************************/ + +extern void weak_function stm32_spiinitialize(void); + +/************************************************************************************ + * Name: stm32_usbinitialize + * + * Description: + * Called to setup USB-related GPIO pins for the VSN board. + * + ************************************************************************************/ + +extern void weak_function stm32_usbinitialize(void); + + +/************************************************************************************ + * Init Power Module and set board system voltage + ************************************************************************************/ + +extern void board_power_init(void); + + +#endif /* __ASSEMBLY__ */ +#endif /* __CONFIGS_VSN_SRC_VSN_INTERNAL_H */ + |