5 files changed, 62 insertions, 16 deletions
diff --git a/nuttx/configs/README.txt b/nuttx/configs/README.txt
index c1b73b310..6603c9848 100644
--- a/nuttx/configs/README.txt
+++ b/nuttx/configs/README.txt
@@ -139,7 +139,7 @@ defconfig -- This is a configuration file similar to the Linux
 		CONFIG_DRAM_START - The start address of DRAM (physical)
 		CONFIG_DRAM_VSTART - The start address of DRAM (virtual)
 
-	General build options
+	General build options:
 
 		CONFIG_RRLOAD_BINARY - make the rrload binary format used with
 		  BSPs from www.ridgerun.com using the tools/mkimage.sh script.
@@ -157,7 +157,7 @@ defconfig -- This is a configuration file similar to the Linux
 		  COMPILEXX have been defined in the configuratins Make.defs
 		  file.
 
-	General OS setup
+	Building application code:
 
 		CONFIG_APP_DIR - Identifies the directory that builds the
 		  application to link with NuttX. This symbol must be assigned
@@ -201,6 +201,28 @@ defconfig -- This is a configuration file similar to the Linux
 		  example, to include makefile fragments (e.g., .config or Make.defs)
 		  or to set up include file paths.
 
+	Two-pass build options.  If the 2 pass build option is selected, then these
+	options configure the make system build a extra link object. This link object
+	is assumed to be an incremental (relative) link object, but could be a static
+	library (archive) (some modification to this Makefile would be required if
+	CONFIG_PASS1_OBJECT is an archive). Pass 1 1ncremental (relative) link objects
+	should be put into the processor-specific source directory (where other
+	link objects will be created).  If the pass1 obect is an archive, it could
+	go anywhere.
+
+		CONFIG_BUILD_2PASS - Enables the two pass build options.
+
+	When the two pass build option is enabled, the following also apply:
+
+		CONFIG_PASS1_OBJECT - The name of the first pass object.
+		CONFIG_PASS1_BUILDIR - The path, relative to the top NuttX build
+		  directory to directory that contains the Makefile to build the
+		  first pass object.  The Makefile must support the following targets:
+		  - The special target arch/$(CONFIG_ARCH)/src/$(CONFIG_PASS1_OBJECT)
+		  - and the usual depend, clean, and distclean targets.
+
+	General OS setup
+
 		CONFIG_DEBUG - enables built-in debug options
 		CONFIG_DEBUG_VERBOSE - enables verbose debug output
 		CONFIG_DEBUG_SYMBOLS - build without optimization and with
@@ -308,7 +330,8 @@ defconfig -- This is a configuration file similar to the Linux
 		  enable the on-demand paging feature as described in
 		  http://www.nuttx.org/NuttXDemandPaging.html.
 
-    If CONFIG_PAGING is selected, then the following also apply:
+    If CONFIG_PAGING is selected, then you will probabaly need CONFIG_BUILD_2PASS to
+    correctly position the code and the following configuration options also apply:
 
 		CONFIG_PAGING_PAGESIZE - The size of one managed page.  This must
 		  be a value supported by the processor's memory management unit.
diff --git a/nuttx/configs/ea3131/locked/Makefile b/nuttx/configs/ea3131/locked/Makefile
index b4566ae40..26a62a683 100755
--- a/nuttx/configs/ea3131/locked/Makefile
+++ b/nuttx/configs/ea3131/locked/Makefile
@@ -36,10 +36,18 @@
 -include $(TOPDIR)/.config
 -include $(TOPDIR)/Make.defs
 
-# Remove the application library (libapp) from the list of libraries.
+# Board-specific directory, board library, and application library
 
+PASS1_SRCDIR	= arch/$(CONFIG_ARCH)/src
+PASS1_BOARDDIR	= $(PASS1_SRCDIR)/board
+PASS1_LIBBOARD	= $(PASS1_BOARDDIR)/libboard$(LIBEXT)
 PASS1_LIBAPP	= $(CONFIG_APP_DIR)/libapp$(LIBEXT)
+
+# Remove the application library (libapp) from the list of libraries.  Add
+# the boad library (liboard)
+
 PASS1_LINKLIBS	= $(filter-out $(PASS1_LIBAPP),$(LINKLIBS))
+PASS1_LINKLIBS	+= $(PASS1_LIBBOARD)
 
 # Get the paths to the libraries and the links script path in format that
 # is appropriate for the host OS
@@ -58,8 +66,12 @@ PASS1_LDFLAGS	= -r $(PASS1_LDSCRIPT)
 PASS1_LDLIBS	= $(patsubst lib%,-l%,$(basename $(notdir $(PASS1_LINKLIBS))))
 PASS1_LIBGCC	= "${shell $(CC) -print-libgcc-file-name}"
 
+# Targets:
+
 all: locked.r
 
+.PHONY:	depend clean distclean
+
 # Create include-able linker script that specifies all of the symbols to be
 # resolved in the locked.r file.
 
@@ -67,18 +79,26 @@ ld-locked.inc: mklocked.sh $(TOPDIR)/.config
 	@echo "MK:  ld-locked.inc"
 	@./mklocked.sh "$(TOPDIR)"
 
+# Make the board library. This is normally done in arch/arm/src/Makefile.
+# However, we need it earlier here when doing a two-pass build so that libboard.a
+# is available to link against.
+
+$(PASS1_LIBBOARD):
+	@$(MAKE) -C $(TOPDIR)/configs/ea3131/src TOPDIR="$(TOPDIR)" libboard$(LIBEXT)
+
 # Create the locked.r file containing all of the code (except the start-up code)
 # that needs to lie in the locked text region.
 
-locked.r: ld-locked.inc
+locked.r: ld-locked.inc $(PASS1_LIBBOARD)
 	@echo "LD:  locked.r"
 	@$(LD) -o $@ $(PASS1_LDFLAGS) $(PASS1_LIBPATHS) --start-group $(PASS1_LDLIBS) --end-group $(PASS1_LIBGCC) 
-	@echo "NM:  locked.map"
 	@$(NM) $@ > locked.map
 	@fgrep " U " locked.map | grep -v os_start
-	@echo "SZ:"
 	@$(CROSSDEV)size $@
 
+$(PASS1_SRCDIR)/locked.r: locked.r
+	@cp -a locked.r $(TOPDIR)/$(PASS1_SRCDIR)/locked.r
+
 .depend:
 
 depend: .depend
diff --git a/nuttx/configs/ea3131/locked/ld-locked.script b/nuttx/configs/ea3131/locked/ld-locked.script
index f89d8549f..5b5feeb1a 100644
--- a/nuttx/configs/ea3131/locked/ld-locked.script
+++ b/nuttx/configs/ea3131/locked/ld-locked.script
@@ -37,8 +37,7 @@ INCLUDE ld-locked.inc
 OUTPUT_ARCH(arm)
 SECTIONS
 {
-	.locked : {
-		*(.vectors)
-		*(.text .text.*)        
-	}
+	.text.locked : { *(.text .text.*) }
+	.data : { *(.data) } 
+	.bss :  { *(.bss)  *(COMMON) } 
 }
 \ No newline at end of file
diff --git a/nuttx/configs/ea3131/pgnsh/defconfig b/nuttx/configs/ea3131/pgnsh/defconfig
index db542a647..58480f875 100755
--- a/nuttx/configs/ea3131/pgnsh/defconfig
+++ b/nuttx/configs/ea3131/pgnsh/defconfig
@@ -202,8 +202,8 @@ CONFIG_HAVE_LIBM=n
 # Setup for a two-pass build
 #
 CONFIG_BUILD_2PASS=y
-CONFIG_PASS1_DIR=configs/ea3131/locked
-CONFIG_PASS1_LIB=locked.r
+CONFIG_PASS1_BUILDIR=configs/ea3131/locked
+CONFIG_PASS1_OBJECT=locked.r
 
 #
 # General OS setup
diff --git a/nuttx/configs/ea3131/pgnsh/ld.script b/nuttx/configs/ea3131/pgnsh/ld.script
index 0dc768257..131ee62f9 100755
--- a/nuttx/configs/ea3131/pgnsh/ld.script
+++ b/nuttx/configs/ea3131/pgnsh/ld.script
@@ -32,7 +32,7 @@
  * POSSIBILITY OF SUCH DAMAGE.
  *
  ****************************************************************************/
-
+ 
 /* The LPC3131 has 192Kb of ISRAM beginning at virtual address 0x1102:8000.
  * LPC313x boot ROM expects the boot image be compiled with entry point at
  * 0x1102:9000.  A 128b header will appear at this address (applied by
@@ -45,6 +45,10 @@
  * locked - Pages locked in memory.     Start: 0x1102 8000 Size: 36Kb
  * paged  - Pages in nonvolatile store. Start: 0x1103 1000 Size: 384Kb
  * data   - .data/.bss/heap.            Start: 0x1109 1000 Size: 44Kb
+ *
+ * These region sizes must match the size in pages specified for each region
+ * in the NuttX configuration file:  CONFIG_PAGING_NLOCKED, CONFIG_PAGING_NVPAGED,
+ * and CONFIG_PAGING_NDATA.
  */
 
 MEMORY
@@ -61,10 +65,10 @@ SECTIONS
 	.locked : {
 		_slocked = ABSOLUTE(.);
 		*(.vectors)
-		*(.locked)
+		locked.r (.text)
 		_elocked = ABSOLUTE(.);
 	} >locked
-	_eronly = ABSOLUTE(.);		/* See below                    */
+	_eronly = ABSOLUTE(.);
 
 	.paged : {
 		_spaged = ABSOLUTE(.);