4 files changed, 67 insertions, 6 deletions
diff --git a/nuttx/configs/ez80f910200kitg/README.txt b/nuttx/configs/ez80f910200kitg/README.txt
index 222a25db1..004f607d4 100644
--- a/nuttx/configs/ez80f910200kitg/README.txt
+++ b/nuttx/configs/ez80f910200kitg/README.txt
@@ -107,8 +107,20 @@ available:
 
         CONFIG_APPS_DIR="..\apps"
 
-      NOTE:  If you need to change the toolchain path used in Make.defs,
-      you will need to use the short 8.3 filenames to avoid spaces.  On
-      my change C:\PROGRA~1\ is C:\PROGRA~2\ is C:\Program Files (x86)\
+      NOTES:
+      
+      a. If you need to change the toolchain path used in Make.defs, you
+         will need to use the short 8.3 filenames to avoid spaces.  On my
+         PC, C:\PROGRA~1\ is is C:\Program Files\ and C:\PROGRA~2\ is
+         C:\Program Files (x86)\
+      b. You can't use setenv.sh in the native Windows environment.  Try
+         scripts/setenv.bat instead.
+      c. At present, the native Windows build fails at the final link stages.
+         The failure is due to problems in arch/z80/src/nuttx/linkcmd that
+         is autogenerated by arch/z80/src/Makefile.zdsii.  The basic program
+         is the spurious spaces and and carrirage returns are generated at
+         the end of the lines after a line continuation (\ ^M).  If these
+         trailing bad characters are manually eliminated, then the build
+         will succeed on the next try.
 
 Check out any README.txt files in these <sub-directory>s.
diff --git a/nuttx/configs/ez80f910200kitg/ostest/defconfig b/nuttx/configs/ez80f910200kitg/ostest/defconfig
index e061e6289..757916281 100644
--- a/nuttx/configs/ez80f910200kitg/ostest/defconfig
+++ b/nuttx/configs/ez80f910200kitg/ostest/defconfig
@@ -232,11 +232,10 @@ CONFIG_MMCSD_SDIO=y
 # CONFIG_SENSORS is not set
 # CONFIG_SERCOMM_CONSOLE is not set
 CONFIG_SERIAL=y
-# CONFIG_LOWLEVEL_CONSOLE is not set
+CONFIG_LOWLEVEL_CONSOLE=y
 # CONFIG_16550_UART is not set
 CONFIG_ARCH_HAVE_UART0=y
 CONFIG_MCU_SERIAL=y
-CONFIG_STANDARD_SERIAL=y
 CONFIG_UART0_SERIAL_CONSOLE=y
 # CONFIG_NO_SERIAL_CONSOLE is not set
 
diff --git a/nuttx/configs/ez80f910200kitg/scripts/setenv.bat b/nuttx/configs/ez80f910200kitg/scripts/setenv.bat
new file mode 100644
index 000000000..3a1b987b4
--- /dev/null
+++ b/nuttx/configs/ez80f910200kitg/scripts/setenv.bat
@@ -0,0 +1,50 @@
+@echo off
+
+rem configs/ez80f810200kitg/scripts/setenv.bat
+rem
+rem   Copyright (C) 2012 Gregory Nutt. All rights reserved.
+rem   Author: Gregory Nutt <gnutt@nuttx.org>
+rem
+rem Redistribution and use in source and binary forms, with or without
+rem modification, are permitted provided that the following conditions
+rem are met:
+rem
+rem 1. Redistributions of source code must retain the above copyright
+rem    notice, this list of conditions and the following disclaimer.
+rem 2. Redistributions in binary form must reproduce the above copyright
+rem    notice, this list of conditions and the following disclaimer in
+rem    the documentation and/or other materials provided with the
+rem    distribution.
+rem 3. Neither the name NuttX nor the names of its contributors may be
+rem    used to endorse or promote products derived from this software
+rem    without specific prior written permission.
+rem
+rem THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
+rem "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
+rem LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
+rem FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE
+rem COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
+rem INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING,
+rem BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS
+rem OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED
+rem AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
+rem LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
+rem ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
+rem POSSIBILITY OF SUCH DAMAGE.
+
+rem This is the location where I installed in the MinGW compiler. With
+rem this configuration, it is recommended that you do NOT install the
+rem MSYS tools; they conflict with the GNUWin32 tools.  See
+rem http://www.mingw.org/ for further info.
+
+set PATH=C:\MinGW\bin;%PATH%
+
+rem This is the location where I installed the ZDS-II toolchain.
+
+set PATH=C:\Program Files (x86)\ZiLOG\ZDSII_eZ80Acclaim!_5.1.1\bin;%PATH%
+
+rem This is the location where I installed the GNUWin32 tools.  See
+rem http://gnuwin32.sourceforge.net/.
+
+set PATH=C:\gnuwin32\bin;%PATH%
+echo %PATH%
diff --git a/nuttx/configs/ez80f910200kitg/ostest/setenv.bat b/nuttx/configs/ez80f910200zco/scripts/setenv.bat
index f461cf1cc..88fc6cbf3 100644
--- a/nuttx/configs/ez80f910200kitg/ostest/setenv.bat
+++ b/nuttx/configs/ez80f910200zco/scripts/setenv.bat
@@ -1,6 +1,6 @@
 @echo off
 
-rem configs/ez80f810200kitg/ostest/setenv.bat
+rem configs/ez80f910200zco/scripts/setenv.bat
 rem
 rem   Copyright (C) 2012 Gregory Nutt. All rights reserved.
 rem   Author: Gregory Nutt <gnutt@nuttx.org>