diff options
Diffstat (limited to 'nuttx/configs')
83 files changed, 325 insertions, 285 deletions
diff --git a/nuttx/configs/README.txt b/nuttx/configs/README.txt index 6484a1e19..c1b73b310 100644 --- a/nuttx/configs/README.txt +++ b/nuttx/configs/README.txt @@ -159,8 +159,48 @@ defconfig -- This is a configuration file similar to the Linux General OS setup - CONFIG_EXAMPLE - identifies the subdirectory in examples - that will be used in the build + CONFIG_APP_DIR - Identifies the directory that builds the + application to link with NuttX. This symbol must be assigned + to the path to the application build directory *relative* to + the NuttX top build direcory. As an an example, there are + several example applicatins in the NuttX examples/ sub-directory. + To use one of these example applications, say nsh, you would + set CONFIG_APP_DIR=examples/nsh. If you had an application + directory and the NuttX directory both within another directory + like this: + + build + |-nuttx + | | + | `- Makefile + `-application + | + `- Makefile + + Then you would set CONFIG_APP_DIR=../application. + + The application direction must contain Makefile and this make + file must support the following targets: + + - libapp$(LIBEXT) (usually libapp.a). libapp.a is a static + library ( an archive) that contains all of application object + files. + - clean. Do whatever is appropriate to clean the application + directories for a fresh build. + - distclean. Clean everthing -- auto-generated files, symbolic + links etc. -- so that the directory contents are the same as + the contents in your configuration management system. + This is only done when you change the NuttX configuration. + - depend. Make or update the application build dependencies. + + When this application is invoked it will receive the setting TOPDIR< like: + + $(MAKE) -C $(CONFIG_APP_DIR) TOPDIR="$(TOPDIR)" <target> + + TOPDIR is the full path to the NuttX directory. It can be used, for + example, to include makefile fragments (e.g., .config or Make.defs) + or to set up include file paths. + CONFIG_DEBUG - enables built-in debug options CONFIG_DEBUG_VERBOSE - enables verbose debug output CONFIG_DEBUG_SYMBOLS - build without optimization and with diff --git a/nuttx/configs/c5471evm/defconfig b/nuttx/configs/c5471evm/defconfig index 6078b238f..b2d8eb161 100644 --- a/nuttx/configs/c5471evm/defconfig +++ b/nuttx/configs/c5471evm/defconfig @@ -1,7 +1,7 @@ ############################################################################ # configs/c5471evm/defconfig # -# Copyright (C) 2007-2009 Gregory Nutt. All rights reserved. +# Copyright (C) 2007-2010 Gregory Nutt. All rights reserved. # Author: Gregory Nutt <spudmonkey@racsa.co.cr> # # Redistribution and use in source and binary forms, with or without @@ -135,8 +135,8 @@ CONFIG_HAVE_LIBM=n # # General OS setup # -# CONFIG_EXAMPLE - identifies the subdirectory in examples -# that will be used in the build +# CONFIG_APP_DIR - Identifies the relative path to the directory +# that builds the application to link with NuttX. # CONFIG_DEBUG - enables built-in debug options # CONFIG_DEBUG_VERBOSE - enables verbose debug output # CONFIG_DEBUG_SYMBOLS - build without optimization and with @@ -200,7 +200,7 @@ CONFIG_HAVE_LIBM=n # This format will support execution of NuttX binaries located # in a ROMFS filesystem (see examples/nxflat). # -CONFIG_EXAMPLE=ostest +CONFIG_APP_DIR=examples/ostest CONFIG_DEBUG=n CONFIG_DEBUG_VERBOSE=n CONFIG_DEBUG_SYMBOLS=n diff --git a/nuttx/configs/c5471evm/dhcpconfig b/nuttx/configs/c5471evm/dhcpconfig index 517fb82e9..f57cc2e3e 100644 --- a/nuttx/configs/c5471evm/dhcpconfig +++ b/nuttx/configs/c5471evm/dhcpconfig @@ -1,7 +1,7 @@ ############################################################################ # configs/c5471evm/dhcpconfig # -# Copyright (C) 2007-2009 Gregory Nutt. All rights reserved. +# Copyright (C) 2007-2010 Gregory Nutt. All rights reserved. # Author: Gregory Nutt <spudmonkey@racsa.co.cr> # # Redistribution and use in source and binary forms, with or without @@ -135,8 +135,8 @@ CONFIG_HAVE_LIBM=n # # General OS setup # -# CONFIG_EXAMPLE - identifies the subdirectory in examples -# that will be used in the build +# CONFIG_APP_DIR - Identifies the relative path to the directory +# that builds the application to link with NuttX. # CONFIG_DEBUG - enables built-in debug options # CONFIG_DEBUG_VERBOSE - enables verbose debug output # CONFIG_DEBUG_SYMBOLS - build without optimization and with @@ -200,7 +200,7 @@ CONFIG_HAVE_LIBM=n # This format will support execution of NuttX binaries located # in a ROMFS filesystem (see examples/nxflat). # -CONFIG_EXAMPLE=uip +CONFIG_APP_DIR=examples/uip CONFIG_DEBUG=n CONFIG_DEBUG_VERBOSE=n CONFIG_DEBUG_SYMBOLS=n diff --git a/nuttx/configs/c5471evm/netconfig b/nuttx/configs/c5471evm/netconfig index dacc7d8b8..a96f8fc7e 100644 --- a/nuttx/configs/c5471evm/netconfig +++ b/nuttx/configs/c5471evm/netconfig @@ -1,7 +1,7 @@ ############################################################################ # configs/c5471evm/netconfig # -# Copyright (C) 2007-2009 Gregory Nutt. All rights reserved. +# Copyright (C) 2007-2010 Gregory Nutt. All rights reserved. # Author: Gregory Nutt <spudmonkey@racsa.co.cr> # # Redistribution and use in source and binary forms, with or without @@ -135,8 +135,8 @@ CONFIG_NET_C5471_BASET10=n # # General OS setup # -# CONFIG_EXAMPLE - identifies the subdirectory in examples -# that will be used in the build +# CONFIG_APP_DIR - Identifies the relative path to the directory +# that builds the application to link with NuttX. # CONFIG_DEBUG - enables built-in debug options # CONFIG_DEBUG_VERBOSE - enables verbose debug output # CONFIG_DEBUG_SYMBOLS - build without optimization and with @@ -200,7 +200,7 @@ CONFIG_NET_C5471_BASET10=n # This format will support execution of NuttX binaries located # in a ROMFS filesystem (see examples/nxflat). # -CONFIG_EXAMPLE=nettest +CONFIG_APP_DIR=examples/nettest CONFIG_DEBUG=n CONFIG_DEBUG_VERBOSE=n CONFIG_DEBUG_SYMBOLS=n diff --git a/nuttx/configs/c5471evm/nshconfig b/nuttx/configs/c5471evm/nshconfig index 6bce684ab..e2a924da6 100644 --- a/nuttx/configs/c5471evm/nshconfig +++ b/nuttx/configs/c5471evm/nshconfig @@ -1,7 +1,7 @@ ############################################################################ # configs/c5471evm/nshconfig # -# Copyright (C) 2007-2009 Gregory Nutt. All rights reserved. +# Copyright (C) 2007-2010 Gregory Nutt. All rights reserved. # Author: Gregory Nutt <spudmonkey@racsa.co.cr> # # Redistribution and use in source and binary forms, with or without @@ -135,8 +135,8 @@ CONFIG_HAVE_LIBM=n # # General OS setup # -# CONFIG_EXAMPLE - identifies the subdirectory in examples -# that will be used in the build +# CONFIG_APP_DIR - Identifies the relative path to the directory +# that builds the application to link with NuttX. # CONFIG_DEBUG - enables built-in debug options # CONFIG_DEBUG_VERBOSE - enables verbose debug output # CONFIG_DEBUG_SYMBOLS - build without optimization and with @@ -200,7 +200,7 @@ CONFIG_HAVE_LIBM=n # This format will support execution of NuttX binaries located # in a ROMFS filesystem (see examples/nxflat). # -CONFIG_EXAMPLE=nsh +CONFIG_APP_DIR=examples/nsh CONFIG_DEBUG=n CONFIG_DEBUG_VERBOSE=n CONFIG_DEBUG_SYMBOLS=n diff --git a/nuttx/configs/demo9s12ne64/ostest/defconfig b/nuttx/configs/demo9s12ne64/ostest/defconfig index 9366f5321..630187b06 100755 --- a/nuttx/configs/demo9s12ne64/ostest/defconfig +++ b/nuttx/configs/demo9s12ne64/ostest/defconfig @@ -1,7 +1,7 @@ ############################################################################ # configs/demo9s12ne64/ostest/defconfig # -# Copyright (C) 2009 Gregory Nutt. All rights reserved. +# Copyright (C) 2009-2010 Gregory Nutt. All rights reserved. # Author: Gregory Nutt <spudmonkey@racsa.co.cr> # # Redistribution and use in source and binary forms, with or without @@ -183,8 +183,8 @@ CONFIG_HAVE_LIBM=n # # General OS setup # -# CONFIG_EXAMPLE - identifies the subdirectory in examples -# that will be used in the build +# CONFIG_APP_DIR - Identifies the relative path to the directory +# that builds the application to link with NuttX. # CONFIG_DEBUG - enables built-in debug options # CONFIG_DEBUG_VERBOSE - enables verbose debug output # CONFIG_DEBUG_SYMBOLS - build without optimization and with @@ -272,7 +272,7 @@ CONFIG_HAVE_LIBM=n # CONFIG_SIG_SIGWORK - The signal number that will be used to wake-up # the worker thread. Default: 4 # -CONFIG_EXAMPLE=ostest +CONFIG_APP_DIR=examples/ostest CONFIG_DEBUG=n CONFIG_DEBUG_VERBOSE=n CONFIG_DEBUG_SYMBOLS=n diff --git a/nuttx/configs/ea3131/nsh/defconfig b/nuttx/configs/ea3131/nsh/defconfig index 92b6c2b36..0d2774c21 100755 --- a/nuttx/configs/ea3131/nsh/defconfig +++ b/nuttx/configs/ea3131/nsh/defconfig @@ -201,8 +201,8 @@ CONFIG_HAVE_LIBM=n # # General OS setup # -# CONFIG_EXAMPLE - identifies the subdirectory in examples -# that will be used in the build +# CONFIG_APP_DIR - Identifies the relative path to the directory +# that builds the application to link with NuttX. # CONFIG_DEBUG - enables built-in debug options # CONFIG_DEBUG_VERBOSE - enables verbose debug output # CONFIG_DEBUG_SYMBOLS - build without optimization and with @@ -290,7 +290,7 @@ CONFIG_HAVE_LIBM=n # CONFIG_SIG_SIGWORK - The signal number that will be used to wake-up # the worker thread. Default: 4 # -CONFIG_EXAMPLE=nsh +CONFIG_APP_DIR=examples/nsh CONFIG_DEBUG=n CONFIG_DEBUG_VERBOSE=n CONFIG_DEBUG_SYMBOLS=n diff --git a/nuttx/configs/ea3131/ostest/defconfig b/nuttx/configs/ea3131/ostest/defconfig index f329b8277..922482d4c 100755 --- a/nuttx/configs/ea3131/ostest/defconfig +++ b/nuttx/configs/ea3131/ostest/defconfig @@ -201,8 +201,8 @@ CONFIG_HAVE_LIBM=n # # General OS setup # -# CONFIG_EXAMPLE - identifies the subdirectory in examples -# that will be used in the build +# CONFIG_APP_DIR - Identifies the relative path to the directory +# that builds the application to link with NuttX. # CONFIG_DEBUG - enables built-in debug options # CONFIG_DEBUG_VERBOSE - enables verbose debug output # CONFIG_DEBUG_SYMBOLS - build without optimization and with @@ -290,7 +290,7 @@ CONFIG_HAVE_LIBM=n # CONFIG_SIG_SIGWORK - The signal number that will be used to wake-up # the worker thread. Default: 4 # -CONFIG_EXAMPLE=ostest +CONFIG_APP_DIR=examples/ostest CONFIG_DEBUG=n CONFIG_DEBUG_VERBOSE=n CONFIG_DEBUG_SYMBOLS=n diff --git a/nuttx/configs/ea3131/pgnsh/defconfig b/nuttx/configs/ea3131/pgnsh/defconfig index 756e92e88..db542a647 100755 --- a/nuttx/configs/ea3131/pgnsh/defconfig +++ b/nuttx/configs/ea3131/pgnsh/defconfig @@ -208,8 +208,8 @@ CONFIG_PASS1_LIB=locked.r # # General OS setup # -# CONFIG_EXAMPLE - identifies the subdirectory in examples -# that will be used in the build +# CONFIG_APP_DIR - Identifies the relative path to the directory +# that builds the application to link with NuttX. # CONFIG_DEBUG - enables built-in debug options # CONFIG_DEBUG_VERBOSE - enables verbose debug output # CONFIG_DEBUG_SYMBOLS - build without optimization and with @@ -297,7 +297,7 @@ CONFIG_PASS1_LIB=locked.r # CONFIG_SIG_SIGWORK - The signal number that will be used to wake-up # the worker thread. Default: 4 # -CONFIG_EXAMPLE=nsh +CONFIG_APP_DIR=examples/nsh CONFIG_DEBUG=n CONFIG_DEBUG_VERBOSE=n CONFIG_DEBUG_SYMBOLS=n diff --git a/nuttx/configs/ea3131/src/Makefile b/nuttx/configs/ea3131/src/Makefile index 07443cc87..44b1698f6 100755 --- a/nuttx/configs/ea3131/src/Makefile +++ b/nuttx/configs/ea3131/src/Makefile @@ -47,7 +47,7 @@ endif ifeq ($(CONFIG_PAGING),y) CSRCS += up_fillpage.c endif -ifeq ($(CONFIG_EXAMPLE),usbstorage) +ifeq ($(CONFIG_APP_DIR),examples/usbstorage) CSRCS += up_usbstrg.c endif COBJS = $(CSRCS:.c=$(OBJEXT)) diff --git a/nuttx/configs/ea3131/usbserial/defconfig b/nuttx/configs/ea3131/usbserial/defconfig index 6ef507ba7..b7b652cf5 100755 --- a/nuttx/configs/ea3131/usbserial/defconfig +++ b/nuttx/configs/ea3131/usbserial/defconfig @@ -201,8 +201,8 @@ CONFIG_HAVE_LIBM=n # # General OS setup # -# CONFIG_EXAMPLE - identifies the subdirectory in examples -# that will be used in the build +# CONFIG_APP_DIR - Identifies the relative path to the directory +# that builds the application to link with NuttX. # CONFIG_DEBUG - enables built-in debug options # CONFIG_DEBUG_VERBOSE - enables verbose debug output # CONFIG_DEBUG_SYMBOLS - build without optimization and with @@ -290,7 +290,7 @@ CONFIG_HAVE_LIBM=n # CONFIG_SIG_SIGWORK - The signal number that will be used to wake-up # the worker thread. Default: 4 # -CONFIG_EXAMPLE=usbserial +CONFIG_APP_DIR=examples/usbserial CONFIG_DEBUG=n CONFIG_DEBUG_VERBOSE=n CONFIG_DEBUG_FS=n diff --git a/nuttx/configs/ea3131/usbstorage/defconfig b/nuttx/configs/ea3131/usbstorage/defconfig index 7474122a4..40e82d1e8 100755 --- a/nuttx/configs/ea3131/usbstorage/defconfig +++ b/nuttx/configs/ea3131/usbstorage/defconfig @@ -201,8 +201,8 @@ CONFIG_HAVE_LIBM=n # # General OS setup # -# CONFIG_EXAMPLE - identifies the subdirectory in examples -# that will be used in the build +# CONFIG_APP_DIR - Identifies the relative path to the directory +# that builds the application to link with NuttX. # CONFIG_DEBUG - enables built-in debug options # CONFIG_DEBUG_VERBOSE - enables verbose debug output # CONFIG_DEBUG_SYMBOLS - build without optimization and with @@ -290,7 +290,7 @@ CONFIG_HAVE_LIBM=n # CONFIG_SIG_SIGWORK - The signal number that will be used to wake-up # the worker thread. Default: 4 # -CONFIG_EXAMPLE=usbstorage +CONFIG_APP_DIR=examples/usbstorage CONFIG_DEBUG=n CONFIG_DEBUG_VERBOSE=n CONFIG_DEBUG_FS=n diff --git a/nuttx/configs/eagle100/httpd/defconfig b/nuttx/configs/eagle100/httpd/defconfig index c7b8d7544..7d311cf0c 100644 --- a/nuttx/configs/eagle100/httpd/defconfig +++ b/nuttx/configs/eagle100/httpd/defconfig @@ -204,8 +204,8 @@ CONFIG_HAVE_LIBM=n # # General OS setup # -# CONFIG_EXAMPLE - identifies the subdirectory in examples -# that will be used in the build +# CONFIG_APP_DIR - Identifies the relative path to the directory +# that builds the application to link with NuttX. # CONFIG_DEBUG - enables built-in debug options # CONFIG_DEBUG_VERBOSE - enables verbose debug output # CONFIG_DEBUG_SYMBOLS - build without optimization and with @@ -269,7 +269,7 @@ CONFIG_HAVE_LIBM=n # This format will support execution of NuttX binaries located # in a ROMFS filesystem (see examples/nxflat). # -CONFIG_EXAMPLE=uip +CONFIG_APP_DIR=examples/uip CONFIG_DEBUG=n CONFIG_DEBUG_VERBOSE=n CONFIG_DEBUG_SYMBOLS=n diff --git a/nuttx/configs/eagle100/nettest/defconfig b/nuttx/configs/eagle100/nettest/defconfig index 7dc147618..8f732462d 100644 --- a/nuttx/configs/eagle100/nettest/defconfig +++ b/nuttx/configs/eagle100/nettest/defconfig @@ -204,8 +204,8 @@ CONFIG_HAVE_LIBM=n # # General OS setup # -# CONFIG_EXAMPLE - identifies the subdirectory in examples -# that will be used in the build +# CONFIG_APP_DIR - Identifies the relative path to the directory +# that builds the application to link with NuttX. # CONFIG_DEBUG - enables built-in debug options # CONFIG_DEBUG_VERBOSE - enables verbose debug output # CONFIG_DEBUG_SYMBOLS - build without optimization and with @@ -269,7 +269,7 @@ CONFIG_HAVE_LIBM=n # This format will support execution of NuttX binaries located # in a ROMFS filesystem (see examples/nxflat). # -CONFIG_EXAMPLE=nettest +CONFIG_APP_DIR=examples/nettest CONFIG_DEBUG=y CONFIG_DEBUG_VERBOSE=n CONFIG_DEBUG_SYMBOLS=n diff --git a/nuttx/configs/eagle100/nsh/defconfig b/nuttx/configs/eagle100/nsh/defconfig index 4e4b462ee..a0ff72a87 100644 --- a/nuttx/configs/eagle100/nsh/defconfig +++ b/nuttx/configs/eagle100/nsh/defconfig @@ -204,8 +204,8 @@ CONFIG_HAVE_LIBM=n # # General OS setup # -# CONFIG_EXAMPLE - identifies the subdirectory in examples -# that will be used in the build +# CONFIG_APP_DIR - Identifies the relative path to the directory +# that builds the application to link with NuttX. # CONFIG_DEBUG - enables built-in debug options # CONFIG_DEBUG_VERBOSE - enables verbose debug output # CONFIG_DEBUG_SYMBOLS - build without optimization and with @@ -269,7 +269,7 @@ CONFIG_HAVE_LIBM=n # This format will support execution of NuttX binaries located # in a ROMFS filesystem (see examples/nxflat). # -CONFIG_EXAMPLE=nsh +CONFIG_APP_DIR=examples/nsh CONFIG_DEBUG=n CONFIG_DEBUG_VERBOSE=n CONFIG_DEBUG_SYMBOLS=n diff --git a/nuttx/configs/eagle100/nxflat/defconfig b/nuttx/configs/eagle100/nxflat/defconfig index d18eedd5c..cf880e40e 100644 --- a/nuttx/configs/eagle100/nxflat/defconfig +++ b/nuttx/configs/eagle100/nxflat/defconfig @@ -204,8 +204,8 @@ CONFIG_HAVE_LIBM=n # # General OS setup # -# CONFIG_EXAMPLE - identifies the subdirectory in examples -# that will be used in the build +# CONFIG_APP_DIR - Identifies the relative path to the directory +# that builds the application to link with NuttX. # CONFIG_DEBUG - enables built-in debug options # CONFIG_DEBUG_VERBOSE - enables verbose debug output # CONFIG_DEBUG_SYMBOLS - build without optimization and with @@ -266,7 +266,7 @@ CONFIG_HAVE_LIBM=n # desciptors by task_create() when a new task is started. If # set, all sockets will appear to be closed in the new task. # -CONFIG_EXAMPLE=nxflat +CONFIG_APP_DIR=examples/nxflat CONFIG_DEBUG=n CONFIG_DEBUG_VERBOSE=n CONFIG_DEBUG_SYMBOLS=n diff --git a/nuttx/configs/eagle100/ostest/defconfig b/nuttx/configs/eagle100/ostest/defconfig index 9f3b479ba..82d44a4fa 100644 --- a/nuttx/configs/eagle100/ostest/defconfig +++ b/nuttx/configs/eagle100/ostest/defconfig @@ -204,8 +204,8 @@ CONFIG_HAVE_LIBM=n # # General OS setup # -# CONFIG_EXAMPLE - identifies the subdirectory in examples -# that will be used in the build +# CONFIG_APP_DIR - Identifies the relative path to the directory +# that builds the application to link with NuttX. # CONFIG_DEBUG - enables built-in debug options # CONFIG_DEBUG_VERBOSE - enables verbose debug output # CONFIG_DEBUG_SYMBOLS - build without optimization and with @@ -275,7 +275,7 @@ CONFIG_HAVE_LIBM=n # This format will support execution of NuttX binaries located # in a ROMFS filesystem (see examples/nxflat). # -CONFIG_EXAMPLE=ostest +CONFIG_APP_DIR=examples/ostest CONFIG_DEBUG=n CONFIG_DEBUG_VERBOSE=n CONFIG_DEBUG_SYMBOLS=n diff --git a/nuttx/configs/eagle100/thttpd/defconfig b/nuttx/configs/eagle100/thttpd/defconfig index 6f381e922..81f29fdb6 100644 --- a/nuttx/configs/eagle100/thttpd/defconfig +++ b/nuttx/configs/eagle100/thttpd/defconfig @@ -204,8 +204,8 @@ CONFIG_HAVE_LIBM=n # # General OS setup # -# CONFIG_EXAMPLE - identifies the subdirectory in examples -# that will be used in the build +# CONFIG_APP_DIR - Identifies the relative path to the directory +# that builds the application to link with NuttX. # CONFIG_DEBUG - enables built-in debug options # CONFIG_DEBUG_VERBOSE - enables verbose debug output # CONFIG_DEBUG_SYMBOLS - build without optimization and with @@ -272,7 +272,7 @@ CONFIG_HAVE_LIBM=n # desciptors by task_create() when a new task is started. If # set, all sockets will appear to be closed in the new task. # -CONFIG_EXAMPLE=thttpd +CONFIG_APP_DIR=examples/thttpd CONFIG_DEBUG=n CONFIG_DEBUG_VERBOSE=n CONFIG_DEBUG_SYMBOLS=n diff --git a/nuttx/configs/ez80f910200kitg/ostest/defconfig b/nuttx/configs/ez80f910200kitg/ostest/defconfig index 8509d2f33..ee3ee1c9b 100644 --- a/nuttx/configs/ez80f910200kitg/ostest/defconfig +++ b/nuttx/configs/ez80f910200kitg/ostest/defconfig @@ -1,7 +1,7 @@ ############################################################################ # configs/ez80f910200kitg/ostest/defconfig # -# Copyright (C) 2008, 2009 Gregory Nutt. All rights reserved. +# Copyright (C) 2008-2010 Gregory Nutt. All rights reserved. # Author: Gregory Nutt <spudmonkey@racsa.co.cr> # # Redistribution and use in source and binary forms, with or without @@ -167,8 +167,8 @@ CONFIG_HAVE_LIBM=n # # General OS setup # -# CONFIG_EXAMPLE - identifies the subdirectory in examples -# that will be used in the build +# CONFIG_APP_DIR - Identifies the relative path to the directory +# that builds the application to link with NuttX. # CONFIG_DEBUG - enables built-in debug options # CONFIG_DEBUG_VERBOSE - enables verbose debug output # CONFIG_DEBUG_SYMBOLS - build without optimization and with @@ -234,7 +234,7 @@ CONFIG_HAVE_LIBM=n # desciptors by task_create() when a new task is started. If # set, all sockets will appear to be closed in the new task. # -CONFIG_EXAMPLE=ostest +CONFIG_APP_DIR=examples/ostest CONFIG_DEBUG=y CONFIG_DEBUG_VERBOSE=n CONFIG_DEBUG_SYMBOLS=n diff --git a/nuttx/configs/ez80f910200zco/dhcpd/defconfig b/nuttx/configs/ez80f910200zco/dhcpd/defconfig index fac51a618..b15977b62 100644 --- a/nuttx/configs/ez80f910200zco/dhcpd/defconfig +++ b/nuttx/configs/ez80f910200zco/dhcpd/defconfig @@ -1,7 +1,7 @@ ############################################################################ # configs/ez80f910200zco/dhcpd/defconfig # -# Copyright (C) 2009 Gregory Nutt. All rights reserved. +# Copyright (C) 2009-2010 Gregory Nutt. All rights reserved. # Author: Gregory Nutt <spudmonkey@racsa.co.cr> # # Redistribution and use in source and binary forms, with or without @@ -171,8 +171,8 @@ CONFIG_HAVE_LIBM=n # # General OS setup # -# CONFIG_EXAMPLE - identifies the subdirectory in examples -# that will be used in the build +# CONFIG_APP_DIR - Identifies the relative path to the directory +# that builds the application to link with NuttX. # CONFIG_DEBUG - enables built-in debug options # CONFIG_DEBUG_VERBOSE - enables verbose debug output # CONFIG_DEBUG_NET - enables debug of the network subsystem @@ -239,7 +239,7 @@ CONFIG_HAVE_LIBM=n # desciptors by task_create() when a new task is started. If # set, all sockets will appear to be closed in the new task. # -CONFIG_EXAMPLE=dhcpd +CONFIG_APP_DIR=examples/dhcpd CONFIG_DEBUG=y CONFIG_DEBUG_VERBOSE=n CONFIG_DEBUG_SYMBOLS=n diff --git a/nuttx/configs/ez80f910200zco/httpd/defconfig b/nuttx/configs/ez80f910200zco/httpd/defconfig index ad045d0a2..27840eecb 100644 --- a/nuttx/configs/ez80f910200zco/httpd/defconfig +++ b/nuttx/configs/ez80f910200zco/httpd/defconfig @@ -1,7 +1,7 @@ ############################################################################ # configs/ez80f910200zco/httpd/defconfig # -# Copyright (C) 2009 Gregory Nutt. All rights reserved. +# Copyright (C) 2009-2010 Gregory Nutt. All rights reserved. # Author: Gregory Nutt <spudmonkey@racsa.co.cr> # # Redistribution and use in source and binary forms, with or without @@ -171,8 +171,8 @@ CONFIG_HAVE_LIBM=n # # General OS setup # -# CONFIG_EXAMPLE - identifies the subdirectory in examples -# that will be used in the build +# CONFIG_APP_DIR - Identifies the relative path to the directory +# that builds the application to link with NuttX. # CONFIG_DEBUG - enables built-in debug options # CONFIG_DEBUG_VERBOSE - enables verbose debug output # CONFIG_DEBUG_NET - enables debug of the network subsystem @@ -239,7 +239,7 @@ CONFIG_HAVE_LIBM=n # desciptors by task_create() when a new task is started. If # set, all sockets will appear to be closed in the new task. # -CONFIG_EXAMPLE=uip +CONFIG_APP_DIR=examples/uip CONFIG_DEBUG=y CONFIG_DEBUG_VERBOSE=n CONFIG_DEBUG_SYMBOLS=n diff --git a/nuttx/configs/ez80f910200zco/nettest/defconfig b/nuttx/configs/ez80f910200zco/nettest/defconfig index 9f73102b6..6679e9375 100644 --- a/nuttx/configs/ez80f910200zco/nettest/defconfig +++ b/nuttx/configs/ez80f910200zco/nettest/defconfig @@ -1,7 +1,7 @@ ############################################################################ # configs/ez80f910200zco/nettest/defconfig # -# Copyright (C) 2008, 2009 Gregory Nutt. All rights reserved. +# Copyright (C) 2008-2010 Gregory Nutt. All rights reserved. # Author: Gregory Nutt <spudmonkey@racsa.co.cr> # # Redistribution and use in source and binary forms, with or without @@ -171,8 +171,8 @@ CONFIG_HAVE_LIBM=n # # General OS setup # -# CONFIG_EXAMPLE - identifies the subdirectory in examples -# that will be used in the build +# CONFIG_APP_DIR - Identifies the relative path to the directory +# that builds the application to link with NuttX. # CONFIG_DEBUG - enables built-in debug options # CONFIG_DEBUG_VERBOSE - enables verbose debug output # CONFIG_DEBUG_NET - enables debug of the network subsystem @@ -239,7 +239,7 @@ CONFIG_HAVE_LIBM=n # desciptors by task_create() when a new task is started. If # set, all sockets will appear to be closed in the new task. # -CONFIG_EXAMPLE=nettest +CONFIG_APP_DIR=examples/nettest CONFIG_DEBUG=y CONFIG_DEBUG_VERBOSE=n CONFIG_DEBUG_SYMBOLS=n diff --git a/nuttx/configs/ez80f910200zco/nsh/defconfig b/nuttx/configs/ez80f910200zco/nsh/defconfig index 4606e71ab..91bc884b8 100644 --- a/nuttx/configs/ez80f910200zco/nsh/defconfig +++ b/nuttx/configs/ez80f910200zco/nsh/defconfig @@ -1,7 +1,7 @@ ############################################################################ # configs/ez80f910200zco/nsh/defconfig # -# Copyright (C) 2009 Gregory Nutt. All rights reserved. +# Copyright (C) 2009-2010 Gregory Nutt. All rights reserved. # Author: Gregory Nutt <spudmonkey@racsa.co.cr> # # Redistribution and use in source and binary forms, with or without @@ -171,8 +171,8 @@ CONFIG_HAVE_LIBM=n # # General OS setup # -# CONFIG_EXAMPLE - identifies the subdirectory in examples -# that will be used in the build +# CONFIG_APP_DIR - Identifies the relative path to the directory +# that builds the application to link with NuttX. # CONFIG_DEBUG - enables built-in debug options # CONFIG_DEBUG_VERBOSE - enables verbose debug output # CONFIG_DEBUG_NET - enables debug of the network subsystem @@ -239,7 +239,7 @@ CONFIG_HAVE_LIBM=n # desciptors by task_create() when a new task is started. If # set, all sockets will appear to be closed in the new task. # -CONFIG_EXAMPLE=nsh +CONFIG_APP_DIR=examples/nsh CONFIG_DEBUG=y CONFIG_DEBUG_VERBOSE=n CONFIG_DEBUG_SYMBOLS=n diff --git a/nuttx/configs/ez80f910200zco/ostest/defconfig b/nuttx/configs/ez80f910200zco/ostest/defconfig index 0b5183715..11f079c19 100644 --- a/nuttx/configs/ez80f910200zco/ostest/defconfig +++ b/nuttx/configs/ez80f910200zco/ostest/defconfig @@ -1,7 +1,7 @@ ############################################################################ # configs/ez80f910200zco/ostest/defconfig # -# Copyright (C) 2008, 2009 Gregory Nutt. All rights reserved. +# Copyright (C) 2008-2010 Gregory Nutt. All rights reserved. # Author: Gregory Nutt <spudmonkey@racsa.co.cr> # # Redistribution and use in source and binary forms, with or without @@ -170,8 +170,8 @@ CONFIG_HAVE_LIBM=n # # General OS setup # -# CONFIG_EXAMPLE - identifies the subdirectory in examples -# that will be used in the build +# CONFIG_APP_DIR - Identifies the relative path to the directory +# that builds the application to link with NuttX. # CONFIG_DEBUG - enables built-in debug options # CONFIG_DEBUG_VERBOSE - enables verbose debug output # CONFIG_DEBUG_SYMBOLS - build without optimization and with @@ -237,7 +237,7 @@ CONFIG_HAVE_LIBM=n # desciptors by task_create() when a new task is started. If # set, all sockets will appear to be closed in the new task. # -CONFIG_EXAMPLE=ostest +CONFIG_APP_DIR=examples/ostest CONFIG_DEBUG=y CONFIG_DEBUG_VERBOSE=n CONFIG_DEBUG_SYMBOLS=n diff --git a/nuttx/configs/ez80f910200zco/poll/defconfig b/nuttx/configs/ez80f910200zco/poll/defconfig index 4b06b3f75..899d976b2 100644 --- a/nuttx/configs/ez80f910200zco/poll/defconfig +++ b/nuttx/configs/ez80f910200zco/poll/defconfig @@ -1,7 +1,7 @@ ############################################################################ # configs/ez80f910200zco/poll/defconfig # -# Copyright (C) 2009 Gregory Nutt. All rights reserved. +# Copyright (C) 2009-2010 Gregory Nutt. All rights reserved. # Author: Gregory Nutt <spudmonkey@racsa.co.cr> # # Redistribution and use in source and binary forms, with or without @@ -171,8 +171,8 @@ CONFIG_HAVE_LIBM=n # # General OS setup # -# CONFIG_EXAMPLE - identifies the subdirectory in examples -# that will be used in the build +# CONFIG_APP_DIR - Identifies the relative path to the directory +# that builds the application to link with NuttX. # CONFIG_DEBUG - enables built-in debug options # CONFIG_DEBUG_VERBOSE - enables verbose debug output # CONFIG_DEBUG_SYMBOLS - build without optimization and with @@ -239,7 +239,7 @@ CONFIG_HAVE_LIBM=n # desciptors by task_create() when a new task is started. If # set, all sockets will appear to be closed in the new task. # -CONFIG_EXAMPLE=poll +CONFIG_APP_DIR=examples/poll CONFIG_DEBUG=y CONFIG_DEBUG_VERBOSE=n CONFIG_DEBUG_SYMBOLS=n diff --git a/nuttx/configs/lm3s6965-ek/nsh/defconfig b/nuttx/configs/lm3s6965-ek/nsh/defconfig index 66c0fbed6..412eae239 100755 --- a/nuttx/configs/lm3s6965-ek/nsh/defconfig +++ b/nuttx/configs/lm3s6965-ek/nsh/defconfig @@ -218,8 +218,8 @@ CONFIG_HAVE_LIBM=n # # General OS setup # -# CONFIG_EXAMPLE - identifies the subdirectory in examples -# that will be used in the build +# CONFIG_APP_DIR - Identifies the relative path to the directory +# that builds the application to link with NuttX. # CONFIG_DEBUG - enables built-in debug options # CONFIG_DEBUG_VERBOSE - enables verbose debug output # CONFIG_DEBUG_SYMBOLS - build without optimization and with @@ -289,7 +289,7 @@ CONFIG_HAVE_LIBM=n # This format will support execution of NuttX binaries located # in a ROMFS filesystem (see examples/nxflat). # -CONFIG_EXAMPLE=nsh +CONFIG_APP_DIR=examples/nsh CONFIG_DEBUG=n CONFIG_DEBUG_VERBOSE=n CONFIG_DEBUG_SYMBOLS=n diff --git a/nuttx/configs/lm3s6965-ek/nx/defconfig b/nuttx/configs/lm3s6965-ek/nx/defconfig index 9efda7b07..4fa93a886 100755 --- a/nuttx/configs/lm3s6965-ek/nx/defconfig +++ b/nuttx/configs/lm3s6965-ek/nx/defconfig @@ -218,8 +218,8 @@ CONFIG_HAVE_LIBM=n # # General OS setup # -# CONFIG_EXAMPLE - identifies the subdirectory in examples -# that will be used in the build +# CONFIG_APP_DIR - Identifies the relative path to the directory +# that builds the application to link with NuttX. # CONFIG_DEBUG - enables built-in debug options # CONFIG_DEBUG_VERBOSE - enables verbose debug output # CONFIG_DEBUG_SYMBOLS - build without optimization and with @@ -289,7 +289,7 @@ CONFIG_HAVE_LIBM=n # This format will support execution of NuttX binaries located # in a ROMFS filesystem (see examples/nxflat). # -CONFIG_EXAMPLE=nx +CONFIG_APP_DIR=examples/nx CONFIG_DEBUG=n CONFIG_DEBUG_VERBOSE=n CONFIG_DEBUG_SYMBOLS=n diff --git a/nuttx/configs/lm3s6965-ek/ostest/defconfig b/nuttx/configs/lm3s6965-ek/ostest/defconfig index e1f85c3d0..bd2a3da7b 100755 --- a/nuttx/configs/lm3s6965-ek/ostest/defconfig +++ b/nuttx/configs/lm3s6965-ek/ostest/defconfig @@ -218,8 +218,8 @@ CONFIG_HAVE_LIBM=n # # General OS setup # -# CONFIG_EXAMPLE - identifies the subdirectory in examples -# that will be used in the build +# CONFIG_APP_DIR - Identifies the relative path to the directory +# that builds the application to link with NuttX. # CONFIG_DEBUG - enables built-in debug options # CONFIG_DEBUG_VERBOSE - enables verbose debug output # CONFIG_DEBUG_SYMBOLS - build without optimization and with @@ -289,7 +289,7 @@ CONFIG_HAVE_LIBM=n # This format will support execution of NuttX binaries located # in a ROMFS filesystem (see examples/nxflat). # -CONFIG_EXAMPLE=ostest +CONFIG_APP_DIR=examples/ostest CONFIG_DEBUG=n CONFIG_DEBUG_VERBOSE=n CONFIG_DEBUG_SYMBOLS=n diff --git a/nuttx/configs/m68332evb/defconfig b/nuttx/configs/m68332evb/defconfig index b742c4c02..208d2d49b 100644 --- a/nuttx/configs/m68332evb/defconfig +++ b/nuttx/configs/m68332evb/defconfig @@ -1,7 +1,7 @@ ############################################################################ # configs/m68332evb/defconfig # -# Copyright (C) 2007-2009 Gregory Nutt. All rights reserved. +# Copyright (C) 2007-2010 Gregory Nutt. All rights reserved. # Author: Gregory Nutt <spudmonkey@racsa.co.cr> # # Redistribution and use in source and binary forms, with or without @@ -106,8 +106,8 @@ CONFIG_HAVE_LIBM=n # # General OS setup # -# CONFIG_EXAMPLE - identifies the subdirectory in examples -# that will be used in the build +# CONFIG_APP_DIR - Identifies the relative path to the directory +# that builds the application to link with NuttX. # CONFIG_DEBUG - enables built-in debug options # CONFIG_DEBUG_VERBOSE - enables verbose debug output # CONFIG_DEBUG_SYMBOLS - build without optimization and with @@ -168,7 +168,7 @@ CONFIG_HAVE_LIBM=n # desciptors by task_create() when a new task is started. If # set, all sockets will appear to be closed in the new task. # -CONFIG_EXAMPLE=ostest +CONFIG_APP_DIR=examples/ostest CONFIG_DEBUG=n CONFIG_DEBUG_VERBOSE=n CONFIG_DEBUG_SYMBOLS=n diff --git a/nuttx/configs/mcu123-lpc214x/nsh/defconfig b/nuttx/configs/mcu123-lpc214x/nsh/defconfig index 3125e535d..1d77d5c41 100644 --- a/nuttx/configs/mcu123-lpc214x/nsh/defconfig +++ b/nuttx/configs/mcu123-lpc214x/nsh/defconfig @@ -1,7 +1,7 @@ ############################################################################ # configs/mcu123-lpc214x/nsh/defconfig # -# Copyright (C) 2008-2009 Gregory Nutt. All rights reserved. +# Copyright (C) 2008-2010 Gregory Nutt. All rights reserved. # Author: Gregory Nutt <spudmonkey@racsa.co.cr> # # Redistribution and use in source and binary forms, with or without @@ -139,8 +139,8 @@ CONFIG_HAVE_LIBM=n # # General OS setup # -# CONFIG_EXAMPLE - identifies the subdirectory in examples -# that will be used in the build +# CONFIG_APP_DIR - Identifies the relative path to the directory +# that builds the application to link with NuttX. # CONFIG_DEBUG - enables built-in debug options # CONFIG_DEBUG_VERBOSE - enables verbose debug output # CONFIG_DEBUG_SYMBOLS - build without optimization and with @@ -204,7 +204,7 @@ CONFIG_HAVE_LIBM=n # This format will support execution of NuttX binaries located # in a ROMFS filesystem (see examples/nxflat). # -CONFIG_EXAMPLE=nsh +CONFIG_APP_DIR=examples/nsh CONFIG_DEBUG=n CONFIG_DEBUG_VERBOSE=n CONFIG_DEBUG_SYMBOLS=n diff --git a/nuttx/configs/mcu123-lpc214x/ostest/defconfig b/nuttx/configs/mcu123-lpc214x/ostest/defconfig index 58540313f..b3ce31e81 100644 --- a/nuttx/configs/mcu123-lpc214x/ostest/defconfig +++ b/nuttx/configs/mcu123-lpc214x/ostest/defconfig @@ -1,7 +1,7 @@ ############################################################################ # configs/mcu123-lpc214x/ostest/defconfig # -# Copyright (C) 2007-2009 Gregory Nutt. All rights reserved. +# Copyright (C) 2007-2010 Gregory Nutt. All rights reserved. # Author: Gregory Nutt <spudmonkey@racsa.co.cr> # # Redistribution and use in source and binary forms, with or without @@ -139,8 +139,8 @@ CONFIG_HAVE_LIBM=n # # General OS setup # -# CONFIG_EXAMPLE - identifies the subdirectory in examples -# that will be used in the build +# CONFIG_APP_DIR - Identifies the relative path to the directory +# that builds the application to link with NuttX. # CONFIG_DEBUG - enables built-in debug options # CONFIG_DEBUG_VERBOSE - enables verbose debug output # CONFIG_DEBUG_SYMBOLS - build without optimization and with @@ -204,7 +204,7 @@ CONFIG_HAVE_LIBM=n # This format will support execution of NuttX binaries located # in a ROMFS filesystem (see examples/nxflat). # -CONFIG_EXAMPLE=ostest +CONFIG_APP_DIR=examples/ostest CONFIG_DEBUG=n CONFIG_DEBUG_VERBOSE=n CONFIG_DEBUG_SYMBOLS=n diff --git a/nuttx/configs/mcu123-lpc214x/src/Makefile b/nuttx/configs/mcu123-lpc214x/src/Makefile index aad225d08..431d85fc0 100644 --- a/nuttx/configs/mcu123-lpc214x/src/Makefile +++ b/nuttx/configs/mcu123-lpc214x/src/Makefile @@ -1,7 +1,7 @@ ############################################################################ # configs/mcu123-lpc214x/src/Makefile # -# Copyright (C) 2007-2009 Gregory Nutt. All rights reserved. +# Copyright (C) 2007-2010 Gregory Nutt. All rights reserved. # Author: Gregory Nutt <spudmonkey@racsa.co.cr> # # Redistribution and use in source and binary forms, with or without @@ -51,7 +51,7 @@ CSRCS = up_spi.c up_leds.c ifeq ($(CONFIG_EXAMPLES_NSH_ARCHINIT),y) CSRCS += up_nsh.c endif -ifeq ($(CONFIG_EXAMPLE),usbstorage) +ifeq ($(CONFIG_APP_DIR),examples/usbstorage) CSRCS += up_usbstrg.c endif diff --git a/nuttx/configs/mcu123-lpc214x/usbserial/defconfig b/nuttx/configs/mcu123-lpc214x/usbserial/defconfig index 8eb24b0cc..109fcee6b 100644 --- a/nuttx/configs/mcu123-lpc214x/usbserial/defconfig +++ b/nuttx/configs/mcu123-lpc214x/usbserial/defconfig @@ -1,7 +1,7 @@ ############################################################################ # configs/mcu123-lpc214x/usbserial/defconfig # -# Copyright (C) 2008-2009 Gregory Nutt. All rights reserved. +# Copyright (C) 2008-2010 Gregory Nutt. All rights reserved. # Author: Gregory Nutt <spudmonkey@racsa.co.cr> # # Redistribution and use in source and binary forms, with or without @@ -139,8 +139,8 @@ CONFIG_HAVE_LIBM=n # # General OS setup # -# CONFIG_EXAMPLE - identifies the subdirectory in examples -# that will be used in the build +# CONFIG_APP_DIR - Identifies the relative path to the directory +# that builds the application to link with NuttX. # CONFIG_DEBUG - enables built-in debug options # CONFIG_DEBUG_VERBOSE - enables verbose debug output # CONFIG_DEBUG_SYMBOLS - build without optimization and with @@ -204,7 +204,7 @@ CONFIG_HAVE_LIBM=n # This format will support execution of NuttX binaries located # in a ROMFS filesystem (see examples/nxflat). # -CONFIG_EXAMPLE=usbserial +CONFIG_APP_DIR=examples/usbserial CONFIG_DEBUG=n CONFIG_DEBUG_VERBOSE=n CONFIG_DEBUG_SYMBOLS=n diff --git a/nuttx/configs/mcu123-lpc214x/usbstorage/defconfig b/nuttx/configs/mcu123-lpc214x/usbstorage/defconfig index 1e7525c0e..39dfe7b88 100644 --- a/nuttx/configs/mcu123-lpc214x/usbstorage/defconfig +++ b/nuttx/configs/mcu123-lpc214x/usbstorage/defconfig @@ -1,7 +1,7 @@ ############################################################################ # configs/mcu123-lpc214x/usbstorage/defconfig # -# Copyright (C) 2008-2009 Gregory Nutt. All rights reserved. +# Copyright (C) 2008-2010 Gregory Nutt. All rights reserved. # Author: Gregory Nutt <spudmonkey@racsa.co.cr> # # Redistribution and use in source and binary forms, with or without @@ -139,8 +139,8 @@ CONFIG_HAVE_LIBM=n # # General OS setup # -# CONFIG_EXAMPLE - identifies the subdirectory in examples -# that will be used in the build +# CONFIG_APP_DIR - Identifies the relative path to the directory +# that builds the application to link with NuttX. # CONFIG_DEBUG - enables built-in debug options # CONFIG_DEBUG_VERBOSE - enables verbose debug output # CONFIG_DEBUG_SYMBOLS - build without optimization and with @@ -204,7 +204,7 @@ CONFIG_HAVE_LIBM=n # This format will support execution of NuttX binaries located # in a ROMFS filesystem (see examples/nxflat). # -CONFIG_EXAMPLE=usbstorage +CONFIG_APP_DIR=examples/usbstorage CONFIG_DEBUG=n CONFIG_DEBUG_VERBOSE=n CONFIG_DEBUG_SYMBOLS=n diff --git a/nuttx/configs/mx1ads/ostest/defconfig b/nuttx/configs/mx1ads/ostest/defconfig index f3dc4a970..11b3f36cc 100644 --- a/nuttx/configs/mx1ads/ostest/defconfig +++ b/nuttx/configs/mx1ads/ostest/defconfig @@ -1,7 +1,7 @@ ############################################################################ # configs/mx1ads/ostest/defconfig # -# Copyright (C) 2009 Gregory Nutt. All rights reserved. +# Copyright (C) 2009-2010 Gregory Nutt. All rights reserved. # Author: Gregory Nutt <spudmonkey@racsa.co.cr> # # Redistribution and use in source and binary forms, with or without @@ -155,8 +155,8 @@ CONFIG_HAVE_LIBM=n # # General OS setup # -# CONFIG_EXAMPLE - identifies the subdirectory in examples -# that will be used in the build +# CONFIG_APP_DIR - Identifies the relative path to the directory +# that builds the application to link with NuttX. # CONFIG_DEBUG - enables built-in debug options # CONFIG_DEBUG_VERBOSE - enables verbose debug output # CONFIG_DEBUG_SYMBOLS - build without optimization and with @@ -220,7 +220,7 @@ CONFIG_HAVE_LIBM=n # This format will support execution of NuttX binaries located # in a ROMFS filesystem (see examples/nxflat). # -CONFIG_EXAMPLE=ostest +CONFIG_APP_DIR=examples/ostest CONFIG_DEBUG=n CONFIG_DEBUG_VERBOSE=n CONFIG_DEBUG_SYMBOLS=n diff --git a/nuttx/configs/ntosd-dm320/nettest/defconfig b/nuttx/configs/ntosd-dm320/nettest/defconfig index 0530270ef..b032b8ea3 100644 --- a/nuttx/configs/ntosd-dm320/nettest/defconfig +++ b/nuttx/configs/ntosd-dm320/nettest/defconfig @@ -144,8 +144,8 @@ CONFIG_HAVE_LIBM=n # # General OS setup # -# CONFIG_EXAMPLE - identifies the subdirectory in examples -# that will be used in the build +# CONFIG_APP_DIR - Identifies the relative path to the directory +# that builds the application to link with NuttX. # CONFIG_DEBUG - enables built-in debug options # CONFIG_DEBUG_VERBOSE - enables verbose debug output # CONFIG_DEBUG_SYMBOLS - build without optimization and with @@ -209,7 +209,7 @@ CONFIG_HAVE_LIBM=n # This format will support execution of NuttX binaries located # in a ROMFS filesystem (see examples/nxflat). # -CONFIG_EXAMPLE=nettest +CONFIG_APP_DIR=examples/nettest CONFIG_DEBUG=n CONFIG_DEBUG_VERBOSE=n CONFIG_DEBUG_SYMBOLS=n diff --git a/nuttx/configs/ntosd-dm320/nsh/defconfig b/nuttx/configs/ntosd-dm320/nsh/defconfig index 88797543a..8468d70cd 100644 --- a/nuttx/configs/ntosd-dm320/nsh/defconfig +++ b/nuttx/configs/ntosd-dm320/nsh/defconfig @@ -143,8 +143,8 @@ CONFIG_HAVE_LIBM=n # # General OS setup # -# CONFIG_EXAMPLE - identifies the subdirectory in examples -# that will be used in the build +# CONFIG_APP_DIR - Identifies the relative path to the directory +# that builds the application to link with NuttX. # CONFIG_DEBUG - enables built-in debug options # CONFIG_DEBUG_VERBOSE - enables verbose debug output # CONFIG_DEBUG_SYMBOLS - build without optimization and with @@ -208,7 +208,7 @@ CONFIG_HAVE_LIBM=n # This format will support execution of NuttX binaries located # in a ROMFS filesystem (see examples/nxflat). # -CONFIG_EXAMPLE=nsh +CONFIG_APP_DIR=examples/nsh CONFIG_DEBUG=n CONFIG_DEBUG_VERBOSE=n CONFIG_DEBUG_SYMBOLS=n diff --git a/nuttx/configs/ntosd-dm320/ostest/defconfig b/nuttx/configs/ntosd-dm320/ostest/defconfig index d6d26eb65..9c653ddb7 100644 --- a/nuttx/configs/ntosd-dm320/ostest/defconfig +++ b/nuttx/configs/ntosd-dm320/ostest/defconfig @@ -144,8 +144,8 @@ CONFIG_HAVE_LIBM=n # # General OS setup # -# CONFIG_EXAMPLE - identifies the subdirectory in examples -# that will be used in the build +# CONFIG_APP_DIR - Identifies the relative path to the directory +# that builds the application to link with NuttX. # CONFIG_DEBUG - enables built-in debug options # CONFIG_DEBUG_VERBOSE - enables verbose debug output # CONFIG_DEBUG_SYMBOLS - build without optimization and with @@ -209,7 +209,7 @@ CONFIG_HAVE_LIBM=n # This format will support execution of NuttX binaries located # in a ROMFS filesystem (see examples/nxflat). # -CONFIG_EXAMPLE=ostest +CONFIG_APP_DIR=examples/ostest CONFIG_DEBUG=n CONFIG_DEBUG_VERBOSE=n CONFIG_DEBUG_SYMBOLS=n diff --git a/nuttx/configs/ntosd-dm320/poll/defconfig b/nuttx/configs/ntosd-dm320/poll/defconfig index d32a9d853..1d4b23e1f 100644 --- a/nuttx/configs/ntosd-dm320/poll/defconfig +++ b/nuttx/configs/ntosd-dm320/poll/defconfig @@ -144,8 +144,8 @@ CONFIG_HAVE_LIBM=n # # General OS setup # -# CONFIG_EXAMPLE - identifies the subdirectory in examples -# that will be used in the build +# CONFIG_APP_DIR - Identifies the relative path to the directory +# that builds the application to link with NuttX. # CONFIG_DEBUG - enables built-in debug options # CONFIG_DEBUG_VERBOSE - enables verbose debug output # CONFIG_DEBUG_SYMBOLS - build without optimization and with @@ -209,7 +209,7 @@ CONFIG_HAVE_LIBM=n # This format will support execution of NuttX binaries located # in a ROMFS filesystem (see examples/nxflat). # -CONFIG_EXAMPLE=poll +CONFIG_APP_DIR=examples/poll CONFIG_DEBUG=n CONFIG_DEBUG_VERBOSE=n CONFIG_DEBUG_SYMBOLS=n diff --git a/nuttx/configs/ntosd-dm320/thttpd/defconfig b/nuttx/configs/ntosd-dm320/thttpd/defconfig index 9a2931cb7..a970b11eb 100644 --- a/nuttx/configs/ntosd-dm320/thttpd/defconfig +++ b/nuttx/configs/ntosd-dm320/thttpd/defconfig @@ -148,8 +148,8 @@ CONFIG_HAVE_LIBM=n # # General OS setup # -# CONFIG_EXAMPLE - identifies the subdirectory in examples -# that will be used in the build +# CONFIG_APP_DIR - Identifies the relative path to the directory +# that builds the application to link with NuttX. # CONFIG_DEBUG - enables built-in debug options # CONFIG_DEBUG_VERBOSE - enables verbose debug output # CONFIG_DEBUG_SYMBOLS - build without optimization and with @@ -216,7 +216,7 @@ CONFIG_HAVE_LIBM=n # desciptors by task_create() when a new task is started. If # set, all sockets will appear to be closed in the new task. # -CONFIG_EXAMPLE=thttpd +CONFIG_APP_DIR=examples/thttpd CONFIG_DEBUG=n CONFIG_DEBUG_VERBOSE=n CONFIG_DEBUG_SYMBOLS=n diff --git a/nuttx/configs/ntosd-dm320/udp/defconfig b/nuttx/configs/ntosd-dm320/udp/defconfig index bf19c0811..5cab3bb1d 100644 --- a/nuttx/configs/ntosd-dm320/udp/defconfig +++ b/nuttx/configs/ntosd-dm320/udp/defconfig @@ -144,8 +144,8 @@ CONFIG_HAVE_LIBM=n # # General OS setup # -# CONFIG_EXAMPLE - identifies the subdirectory in examples -# that will be used in the build +# CONFIG_APP_DIR - Identifies the relative path to the directory +# that builds the application to link with NuttX. # CONFIG_DEBUG - enables built-in debug options # CONFIG_DEBUG_VERBOSE - enables verbose debug output # CONFIG_DEBUG_SYMBOLS - build without optimization and with @@ -209,7 +209,7 @@ CONFIG_HAVE_LIBM=n # This format will support execution of NuttX binaries located # in a ROMFS filesystem (see examples/nxflat). # -CONFIG_EXAMPLE=udp +CONFIG_APP_DIR=examples/udp CONFIG_DEBUG=n CONFIG_DEBUG_VERBOSE=n CONFIG_DEBUG_SYMBOLS=n diff --git a/nuttx/configs/ntosd-dm320/uip/defconfig b/nuttx/configs/ntosd-dm320/uip/defconfig index 0e9d1381c..1125c2d16 100644 --- a/nuttx/configs/ntosd-dm320/uip/defconfig +++ b/nuttx/configs/ntosd-dm320/uip/defconfig @@ -144,8 +144,8 @@ CONFIG_HAVE_LIBM=n # # General OS setup # -# CONFIG_EXAMPLE - identifies the subdirectory in examples -# that will be used in the build +# CONFIG_APP_DIR - Identifies the relative path to the directory +# that builds the application to link with NuttX. # CONFIG_DEBUG - enables built-in debug options # CONFIG_DEBUG_VERBOSE - enables verbose debug output # CONFIG_DEBUG_SYMBOLS - build without optimization and with @@ -209,7 +209,7 @@ CONFIG_HAVE_LIBM=n # This format will support execution of NuttX binaries located # in a ROMFS filesystem (see examples/nxflat). # -CONFIG_EXAMPLE=uip +CONFIG_APP_DIR=examples/uip CONFIG_DEBUG=n CONFIG_DEBUG_VERBOSE=n CONFIG_DEBUG_SYMBOLS=n diff --git a/nuttx/configs/nucleus2g/nsh/defconfig b/nuttx/configs/nucleus2g/nsh/defconfig index 994017d18..06b9a84c0 100755 --- a/nuttx/configs/nucleus2g/nsh/defconfig +++ b/nuttx/configs/nucleus2g/nsh/defconfig @@ -206,8 +206,8 @@ CONFIG_HAVE_LIBM=n # # General OS setup # -# CONFIG_EXAMPLE - identifies the subdirectory in examples -# that will be used in the build +# CONFIG_APP_DIR - Identifies the relative path to the directory +# that builds the application to link with NuttX. # CONFIG_DEBUG - enables built-in debug options # CONFIG_DEBUG_VERBOSE - enables verbose debug output # CONFIG_DEBUG_SYMBOLS - build without optimization and with @@ -295,7 +295,7 @@ CONFIG_HAVE_LIBM=n # CONFIG_SIG_SIGWORK - The signal number that will be used to wake-up # the worker thread. Default: 4 # -CONFIG_EXAMPLE=nsh +CONFIG_APP_DIR=examples/nsh CONFIG_DEBUG=n CONFIG_DEBUG_VERBOSE=n CONFIG_DEBUG_SYMBOLS=n diff --git a/nuttx/configs/nucleus2g/ostest/defconfig b/nuttx/configs/nucleus2g/ostest/defconfig index 6d75dfc87..ab7740c38 100755 --- a/nuttx/configs/nucleus2g/ostest/defconfig +++ b/nuttx/configs/nucleus2g/ostest/defconfig @@ -206,8 +206,8 @@ CONFIG_HAVE_LIBM=n # # General OS setup # -# CONFIG_EXAMPLE - identifies the subdirectory in examples -# that will be used in the build +# CONFIG_APP_DIR - Identifies the relative path to the directory +# that builds the application to link with NuttX. # CONFIG_DEBUG - enables built-in debug options # CONFIG_DEBUG_VERBOSE - enables verbose debug output # CONFIG_DEBUG_SYMBOLS - build without optimization and with @@ -295,7 +295,7 @@ CONFIG_HAVE_LIBM=n # CONFIG_SIG_SIGWORK - The signal number that will be used to wake-up # the worker thread. Default: 4 # -CONFIG_EXAMPLE=ostest +CONFIG_APP_DIR=examples/ostest CONFIG_DEBUG=n CONFIG_DEBUG_VERBOSE=n CONFIG_DEBUG_SYMBOLS=n diff --git a/nuttx/configs/nucleus2g/src/Makefile b/nuttx/configs/nucleus2g/src/Makefile index de5a3c76c..c54ba8a0a 100755 --- a/nuttx/configs/nucleus2g/src/Makefile +++ b/nuttx/configs/nucleus2g/src/Makefile @@ -42,7 +42,7 @@ CSRCS = up_boot.c up_leds.c up_ssp.c ifeq ($(CONFIG_EXAMPLES_NSH_ARCHINIT),y) CSRCS += up_nsh.c endif -ifeq ($(CONFIG_EXAMPLE),usbstorage) +ifeq ($(CONFIG_APP_DIR),examples/usbstorage) CSRCS += up_usbstrg.c endif diff --git a/nuttx/configs/nucleus2g/usbserial/defconfig b/nuttx/configs/nucleus2g/usbserial/defconfig index 506d719ba..93ef69bfc 100755 --- a/nuttx/configs/nucleus2g/usbserial/defconfig +++ b/nuttx/configs/nucleus2g/usbserial/defconfig @@ -206,8 +206,8 @@ CONFIG_HAVE_LIBM=n # # General OS setup # -# CONFIG_EXAMPLE - identifies the subdirectory in examples -# that will be used in the build +# CONFIG_APP_DIR - Identifies the relative path to the directory +# that builds the application to link with NuttX. # CONFIG_DEBUG - enables built-in debug options # CONFIG_DEBUG_VERBOSE - enables verbose debug output # CONFIG_DEBUG_SYMBOLS - build without optimization and with @@ -295,7 +295,7 @@ CONFIG_HAVE_LIBM=n # CONFIG_SIG_SIGWORK - The signal number that will be used to wake-up # the worker thread. Default: 4 # -CONFIG_EXAMPLE=usbserial +CONFIG_APP_DIR=examples/usbserial CONFIG_DEBUG=n CONFIG_DEBUG_VERBOSE=n CONFIG_DEBUG_SYMBOLS=n diff --git a/nuttx/configs/nucleus2g/usbstorage/defconfig b/nuttx/configs/nucleus2g/usbstorage/defconfig index 3f07556b2..2e1aa8322 100755 --- a/nuttx/configs/nucleus2g/usbstorage/defconfig +++ b/nuttx/configs/nucleus2g/usbstorage/defconfig @@ -206,8 +206,8 @@ CONFIG_HAVE_LIBM=n # # General OS setup # -# CONFIG_EXAMPLE - identifies the subdirectory in examples -# that will be used in the build +# CONFIG_APP_DIR - Identifies the relative path to the directory +# that builds the application to link with NuttX. # CONFIG_DEBUG - enables built-in debug options # CONFIG_DEBUG_VERBOSE - enables verbose debug output # CONFIG_DEBUG_SYMBOLS - build without optimization and with @@ -295,7 +295,7 @@ CONFIG_HAVE_LIBM=n # CONFIG_SIG_SIGWORK - The signal number that will be used to wake-up # the worker thread. Default: 4 # -CONFIG_EXAMPLE=usbstorage +CONFIG_APP_DIR=examples/usbstorage CONFIG_DEBUG=n CONFIG_DEBUG_VERBOSE=n CONFIG_DEBUG_SYMBOLS=n diff --git a/nuttx/configs/olimex-lpc2378/nsh/defconfig b/nuttx/configs/olimex-lpc2378/nsh/defconfig index d0a5f15c3..dc960eddf 100755 --- a/nuttx/configs/olimex-lpc2378/nsh/defconfig +++ b/nuttx/configs/olimex-lpc2378/nsh/defconfig @@ -162,8 +162,8 @@ CONFIG_HAVE_LIBM=n # # General OS setup # -# CONFIG_EXAMPLE - identifies the subdirectory in examples -# that will be used in the build +# CONFIG_APP_DIR - Identifies the relative path to the directory +# that builds the application to link with NuttX. # CONFIG_DEBUG - enables built-in debug options # CONFIG_DEBUG_VERBOSE - enables verbose debug output # CONFIG_MM_REGIONS - If the architecture includes multiple @@ -193,7 +193,7 @@ CONFIG_HAVE_LIBM=n # CONFIG_DEV_LOWCONSOLE - Use the simple, low-level serial console # driver (minimal support) # -CONFIG_EXAMPLE=nsh +CONFIG_APP_DIR=examples/nsh CONFIG_DEBUG=n CONFIG_DEBUG_VERBOSE=n #CONFIG_DEBUG_MM=y diff --git a/nuttx/configs/olimex-lpc2378/ostest/defconfig b/nuttx/configs/olimex-lpc2378/ostest/defconfig index 1315af2e7..7dd1af602 100755 --- a/nuttx/configs/olimex-lpc2378/ostest/defconfig +++ b/nuttx/configs/olimex-lpc2378/ostest/defconfig @@ -162,8 +162,8 @@ CONFIG_HAVE_LIBM=n # # General OS setup # -# CONFIG_EXAMPLE - identifies the subdirectory in examples -# that will be used in the build +# CONFIG_APP_DIR - Identifies the relative path to the directory +# that builds the application to link with NuttX. # CONFIG_DEBUG - enables built-in debug options # CONFIG_DEBUG_VERBOSE - enables verbose debug output # CONFIG_MM_REGIONS - If the architecture includes multiple @@ -193,7 +193,7 @@ CONFIG_HAVE_LIBM=n # CONFIG_DEV_LOWCONSOLE - Use the simple, low-level serial console # driver (minimal support) # -CONFIG_EXAMPLE=ostest +CONFIG_APP_DIR=examples/ostest CONFIG_DEBUG=n CONFIG_DEBUG_VERBOSE=n #CONFIG_DEBUG_MM=y diff --git a/nuttx/configs/olimex-strp711/nettest/defconfig b/nuttx/configs/olimex-strp711/nettest/defconfig index 89a638d3e..a91ad272c 100755 --- a/nuttx/configs/olimex-strp711/nettest/defconfig +++ b/nuttx/configs/olimex-strp711/nettest/defconfig @@ -206,8 +206,8 @@ CONFIG_HAVE_LIBM=n # # General OS setup # -# CONFIG_EXAMPLE - identifies the subdirectory in examples -# that will be used in the build +# CONFIG_APP_DIR - Identifies the relative path to the directory +# that builds the application to link with NuttX. # CONFIG_DEBUG - enables built-in debug options # CONFIG_DEBUG_VERBOSE - enables verbose debug output # CONFIG_DEBUG_SYMBOLS - build without optimization and with @@ -289,7 +289,7 @@ CONFIG_HAVE_LIBM=n # CONFIG_SIG_SIGWORK - The signal number that will be used to wake-up # the worker thread. Default: 4 # -CONFIG_EXAMPLE=nettest +CONFIG_APP_DIR=examples/nettest CONFIG_DEBUG=n CONFIG_DEBUG_VERBOSE=n CONFIG_DEBUG_SYMBOLS=n diff --git a/nuttx/configs/olimex-strp711/nsh/defconfig b/nuttx/configs/olimex-strp711/nsh/defconfig index 7e5378ca7..ab4d26a5c 100644 --- a/nuttx/configs/olimex-strp711/nsh/defconfig +++ b/nuttx/configs/olimex-strp711/nsh/defconfig @@ -1,7 +1,7 @@ ############################################################################ # configs/olimes-strp711/nsh/defconfig # -# Copyright (C) 2009 Gregory Nutt. All rights reserved. +# Copyright (C) 2009-2010 Gregory Nutt. All rights reserved. # Author: Gregory Nutt <spudmonkey@racsa.co.cr> # # Redistribution and use in source and binary forms, with or without @@ -206,8 +206,8 @@ CONFIG_HAVE_LIBM=n # # General OS setup # -# CONFIG_EXAMPLE - identifies the subdirectory in examples -# that will be used in the build +# CONFIG_APP_DIR - Identifies the relative path to the directory +# that builds the application to link with NuttX. # CONFIG_DEBUG - enables built-in debug options # CONFIG_DEBUG_VERBOSE - enables verbose debug output # CONFIG_DEBUG_SYMBOLS - build without optimization and with @@ -271,7 +271,7 @@ CONFIG_HAVE_LIBM=n # This format will support execution of NuttX binaries located # in a ROMFS filesystem (see examples/nxflat). # -CONFIG_EXAMPLE=nsh +CONFIG_APP_DIR=examples/nsh CONFIG_DEBUG=n CONFIG_DEBUG_VERBOSE=n CONFIG_DEBUG_SYMBOLS=n diff --git a/nuttx/configs/olimex-strp711/ostest/defconfig b/nuttx/configs/olimex-strp711/ostest/defconfig index 304bc7425..2aa5fd825 100644 --- a/nuttx/configs/olimex-strp711/ostest/defconfig +++ b/nuttx/configs/olimex-strp711/ostest/defconfig @@ -1,7 +1,7 @@ ############################################################################ # configs/olimes-strp711/ostest/defconfig # -# Copyright (C) 2008-2009 Gregory Nutt. All rights reserved. +# Copyright (C) 2008-2010 Gregory Nutt. All rights reserved. # Author: Gregory Nutt <spudmonkey@racsa.co.cr> # # Redistribution and use in source and binary forms, with or without @@ -206,8 +206,8 @@ CONFIG_HAVE_LIBM=n # # General OS setup # -# CONFIG_EXAMPLE - identifies the subdirectory in examples -# that will be used in the build +# CONFIG_APP_DIR - Identifies the relative path to the directory +# that builds the application to link with NuttX. # CONFIG_DEBUG - enables built-in debug options # CONFIG_DEBUG_VERBOSE - enables verbose debug output # CONFIG_DEBUG_SYMBOLS - build without optimization and with @@ -271,7 +271,7 @@ CONFIG_HAVE_LIBM=n # This format will support execution of NuttX binaries located # in a ROMFS filesystem (see examples/nxflat). # -CONFIG_EXAMPLE=ostest +CONFIG_APP_DIR=examples/ostest CONFIG_DEBUG=n CONFIG_DEBUG_VERBOSE=n CONFIG_DEBUG_SYMBOLS=n diff --git a/nuttx/configs/pjrc-8051/defconfig b/nuttx/configs/pjrc-8051/defconfig index b8f3c4879..878daddb4 100644 --- a/nuttx/configs/pjrc-8051/defconfig +++ b/nuttx/configs/pjrc-8051/defconfig @@ -1,7 +1,7 @@ ############################################################################ # configs/pjrc-8051/defconfig # -# Copyright (C) 2007-2009 Gregory Nutt. All rights reserved. +# Copyright (C) 2007-2010 Gregory Nutt. All rights reserved. # Author: Gregory Nutt <spudmonkey@racsa.co.cr> # # Redistribution and use in source and binary forms, with or without @@ -103,8 +103,8 @@ CONFIG_HAVE_LIBM=n # # General OS setup # -# CONFIG_EXAMPLE - identifies the subdirectory in examples -# that will be used in the build +# CONFIG_APP_DIR - Identifies the relative path to the directory +# that builds the application to link with NuttX. # CONFIG_DEBUG - enables built-in debug options # CONFIG_DEBUG_VERBOSE - enables verbose debug output # CONFIG_DEBUG_SYMBOLS - build without optimization and with @@ -165,7 +165,7 @@ CONFIG_HAVE_LIBM=n # desciptors by task_create() when a new task is started. If # set, all sockets will appear to be closed in the new task. # -CONFIG_EXAMPLE=ostest +CONFIG_APP_DIR=examples/ostest CONFIG_DEBUG=n CONFIG_DEBUG_VERBOSE=n CONFIG_DEBUG_SYMBOLS=n diff --git a/nuttx/configs/sam3u-ek/nsh/defconfig b/nuttx/configs/sam3u-ek/nsh/defconfig index ec41ea06f..25854b145 100755 --- a/nuttx/configs/sam3u-ek/nsh/defconfig +++ b/nuttx/configs/sam3u-ek/nsh/defconfig @@ -203,8 +203,8 @@ CONFIG_HAVE_LIBM=n # # General OS setup # -# CONFIG_EXAMPLE - identifies the subdirectory in examples -# that will be used in the build +# CONFIG_APP_DIR - Identifies the relative path to the directory +# that builds the application to link with NuttX. # CONFIG_DEBUG - enables built-in debug options # CONFIG_DEBUG_VERBOSE - enables verbose debug output # CONFIG_DEBUG_SYMBOLS - build without optimization and with @@ -292,7 +292,7 @@ CONFIG_HAVE_LIBM=n # CONFIG_SIG_SIGWORK - The signal number that will be used to wake-up # the worker thread. Default: 4 # -CONFIG_EXAMPLE=nsh +CONFIG_APP_DIR=examples/nsh CONFIG_DEBUG=n CONFIG_DEBUG_VERBOSE=n CONFIG_DEBUG_SYMBOLS=n diff --git a/nuttx/configs/sam3u-ek/nx/defconfig b/nuttx/configs/sam3u-ek/nx/defconfig index bc94309ec..16b0a79c3 100755 --- a/nuttx/configs/sam3u-ek/nx/defconfig +++ b/nuttx/configs/sam3u-ek/nx/defconfig @@ -203,8 +203,8 @@ CONFIG_HAVE_LIBM=n # # General OS setup # -# CONFIG_EXAMPLE - identifies the subdirectory in examples -# that will be used in the build +# CONFIG_APP_DIR - Identifies the relative path to the directory +# that builds the application to link with NuttX. # CONFIG_DEBUG - enables built-in debug options # CONFIG_DEBUG_VERBOSE - enables verbose debug output # CONFIG_DEBUG_SYMBOLS - build without optimization and with @@ -292,7 +292,7 @@ CONFIG_HAVE_LIBM=n # CONFIG_SIG_SIGWORK - The signal number that will be used to wake-up # the worker thread. Default: 4 # -CONFIG_EXAMPLE=nx +CONFIG_APP_DIR=examples/nx CONFIG_DEBUG=n CONFIG_DEBUG_VERBOSE=n CONFIG_DEBUG_SYMBOLS=n diff --git a/nuttx/configs/sam3u-ek/ostest/defconfig b/nuttx/configs/sam3u-ek/ostest/defconfig index 9ee92ecf1..54706dcbd 100755 --- a/nuttx/configs/sam3u-ek/ostest/defconfig +++ b/nuttx/configs/sam3u-ek/ostest/defconfig @@ -204,8 +204,8 @@ CONFIG_HAVE_LIBM=n # # General OS setup # -# CONFIG_EXAMPLE - identifies the subdirectory in examples -# that will be used in the build +# CONFIG_APP_DIR - Identifies the relative path to the directory +# that builds the application to link with NuttX. # CONFIG_DEBUG - enables built-in debug options # CONFIG_DEBUG_VERBOSE - enables verbose debug output # CONFIG_DEBUG_SYMBOLS - build without optimization and with @@ -293,7 +293,7 @@ CONFIG_HAVE_LIBM=n # CONFIG_SIG_SIGWORK - The signal number that will be used to wake-up # the worker thread. Default: 4 # -CONFIG_EXAMPLE=ostest +CONFIG_APP_DIR=examples/ostest CONFIG_DEBUG=n CONFIG_DEBUG_VERBOSE=n CONFIG_DEBUG_SYMBOLS=n diff --git a/nuttx/configs/sam3u-ek/src/Makefile b/nuttx/configs/sam3u-ek/src/Makefile index edcb0ffa1..c80b99c8f 100755 --- a/nuttx/configs/sam3u-ek/src/Makefile +++ b/nuttx/configs/sam3u-ek/src/Makefile @@ -1,7 +1,7 @@ ############################################################################ # configs/sam3u-ek/src/Makefile # -# Copyright (C) 2009 Gregory Nutt. All rights reserved. +# Copyright (C) 2009-2010 Gregory Nutt. All rights reserved. # Author: Gregory Nutt <spudmonkey@racsa.co.cr> # # Redistribution and use in source and binary forms, with or without @@ -47,7 +47,7 @@ endif ifeq ($(CONFIG_SAM3U_HSMCI),y) CSRCS += up_mmcsd.c endif -ifeq ($(CONFIG_EXAMPLE),usbstorage) +ifeq ($(CONFIG_APP_DIR),examples/usbstorage) CSRCS += up_usbstrg.c endif COBJS = $(CSRCS:.c=$(OBJEXT)) diff --git a/nuttx/configs/sim/mount/defconfig b/nuttx/configs/sim/mount/defconfig index 0f4cd9185..606d69c59 100644 --- a/nuttx/configs/sim/mount/defconfig +++ b/nuttx/configs/sim/mount/defconfig @@ -1,7 +1,7 @@ ############################################################################ # sim/mount/defconfig # -# Copyright (C) 2008, 2009 Gregory Nutt. All rights reserved. +# Copyright (C) 2008-2010 Gregory Nutt. All rights reserved. # Author: Gregory Nutt <spudmonkey@racsa.co.cr> # # Redistribution and use in source and binary forms, with or without @@ -52,8 +52,8 @@ CONFIG_ARCH_BOARD_SIM=y # # General OS setup # -# CONFIG_EXAMPLE - identifies the subdirectory in examples -# that will be used in the build +# CONFIG_APP_DIR - Identifies the relative path to the directory +# that builds the application to link with NuttX. # CONFIG_DEBUG - enables built-in debug options # CONFIG_DEBUG_VERBOSE - enables verbose debug output # CONFIG_DEBUG_SYMBOLS - build without optimization and with @@ -114,7 +114,7 @@ CONFIG_ARCH_BOARD_SIM=y # desciptors by task_create() when a new task is started. If # set, all sockets will appear to be closed in the new task. # -CONFIG_EXAMPLE=mount +CONFIG_APP_DIR=examples/mount CONFIG_DEBUG=y CONFIG_DEBUG_VERBOSE=y CONFIG_DEBUG_SYMBOLS=n diff --git a/nuttx/configs/sim/nettest/defconfig b/nuttx/configs/sim/nettest/defconfig index fde3940b7..d2c10377f 100644 --- a/nuttx/configs/sim/nettest/defconfig +++ b/nuttx/configs/sim/nettest/defconfig @@ -1,7 +1,7 @@ ############################################################################ # configs/sim/nettest/defconfig # -# Copyright (C) 2007-2009 Gregory Nutt. All rights reserved. +# Copyright (C) 2007-2010 Gregory Nutt. All rights reserved. # Author: Gregory Nutt <spudmonkey@racsa.co.cr> # # Redistribution and use in source and binary forms, with or without @@ -52,8 +52,8 @@ CONFIG_ARCH_BOARD_SIM=y # # General OS setup # -# CONFIG_EXAMPLE - identifies the subdirectory in examples -# that will be used in the build +# CONFIG_APP_DIR - Identifies the relative path to the directory +# that builds the application to link with NuttX. # CONFIG_DEBUG - enables built-in debug options # CONFIG_DEBUG_VERBOSE - enables verbose debug output # CONFIG_DEBUG_SYMBOLS - build without optimization and with @@ -114,7 +114,7 @@ CONFIG_ARCH_BOARD_SIM=y # desciptors by task_create() when a new task is started. If # set, all sockets will appear to be closed in the new task. # -CONFIG_EXAMPLE=nettest +CONFIG_APP_DIR=examples/nettest CONFIG_DEBUG=n CONFIG_DEBUG_VERBOSE=n CONFIG_DEBUG_SYMBOLS=n diff --git a/nuttx/configs/sim/nsh/defconfig b/nuttx/configs/sim/nsh/defconfig index 4089f0ad5..1cda58d48 100644 --- a/nuttx/configs/sim/nsh/defconfig +++ b/nuttx/configs/sim/nsh/defconfig @@ -1,7 +1,7 @@ ############################################################################ # sim/nsh/defconfig # -# Copyright (C) 2008, 2009 Gregory Nutt. All rights reserved. +# Copyright (C) 2008-2010 Gregory Nutt. All rights reserved. # Author: Gregory Nutt <spudmonkey@racsa.co.cr> # # Redistribution and use in source and binary forms, with or without @@ -52,8 +52,8 @@ CONFIG_ARCH_BOARD_SIM=y # # General OS setup # -# CONFIG_EXAMPLE - identifies the subdirectory in examples -# that will be used in the build +# CONFIG_APP_DIR - Identifies the relative path to the directory +# that builds the application to link with NuttX. # CONFIG_DEBUG - enables built-in debug options # CONFIG_DEBUG_VERBOSE - enables verbose debug output # CONFIG_DEBUG_SYMBOLS - build without optimization and with @@ -114,7 +114,7 @@ CONFIG_ARCH_BOARD_SIM=y # desciptors by task_create() when a new task is started. If # set, all sockets will appear to be closed in the new task. # -CONFIG_EXAMPLE=nsh +CONFIG_APP_DIR=examples/nsh CONFIG_DEBUG=y CONFIG_DEBUG_VERBOSE=y CONFIG_DEBUG_SYMBOLS=n diff --git a/nuttx/configs/sim/nx/defconfig b/nuttx/configs/sim/nx/defconfig index 1b33eb482..cebea94dd 100644 --- a/nuttx/configs/sim/nx/defconfig +++ b/nuttx/configs/sim/nx/defconfig @@ -1,7 +1,7 @@ ############################################################################ # sim/nx/defconfig # -# Copyright (C) 2008, 2009 Gregory Nutt. All rights reserved. +# Copyright (C) 2008-2010 Gregory Nutt. All rights reserved. # Author: Gregory Nutt <spudmonkey@racsa.co.cr> # # Redistribution and use in source and binary forms, with or without @@ -59,8 +59,8 @@ CONFIG_SIM_FBBPP=8 # # General OS setup # -# CONFIG_EXAMPLE - identifies the subdirectory in examples -# that will be used in the build +# CONFIG_APP_DIR - Identifies the relative path to the directory +# that builds the application to link with NuttX. # CONFIG_DEBUG - enables built-in debug options # CONFIG_DEBUG_VERBOSE - enables verbose debug output # CONFIG_DEBUG_SYMBOLS - build without optimization and with @@ -121,7 +121,7 @@ CONFIG_SIM_FBBPP=8 # desciptors by task_create() when a new task is started. If # set, all sockets will appear to be closed in the new task. # -CONFIG_EXAMPLE=nx +CONFIG_APP_DIR=examples/nx CONFIG_DEBUG=y CONFIG_DEBUG_VERBOSE=y CONFIG_DEBUG_SYMBOLS=n diff --git a/nuttx/configs/sim/nx/defconfig-x11 b/nuttx/configs/sim/nx/defconfig-x11 index 8b7c83f24..8cb26d201 100644 --- a/nuttx/configs/sim/nx/defconfig-x11 +++ b/nuttx/configs/sim/nx/defconfig-x11 @@ -1,7 +1,7 @@ ############################################################################ # sim/nx/defconfig # -# Copyright (C) 2008 Gregory Nutt. All rights reserved. +# Copyright (C) 2008, 2010 Gregory Nutt. All rights reserved. # Author: Gregory Nutt <spudmonkey@racsa.co.cr> # # Redistribution and use in source and binary forms, with or without @@ -59,8 +59,8 @@ CONFIG_SIM_FBBPP=32 # # General OS setup # -# CONFIG_EXAMPLE - identifies the subdirectory in examples -# that will be used in the build +# CONFIG_APP_DIR - Identifies the relative path to the directory +# that builds the application to link with NuttX. # CONFIG_DEBUG - enables built-in debug options # CONFIG_DEBUG_VERBOSE - enables verbose debug output # CONFIG_DEBUG_SYMBOLS - build without optimization and with @@ -121,7 +121,7 @@ CONFIG_SIM_FBBPP=32 # desciptors by task_create() when a new task is started. If # set, all sockets will appear to be closed in the new task. # -CONFIG_EXAMPLE=nx +CONFIG_APP_DIR=examples/nx CONFIG_DEBUG=y CONFIG_DEBUG_VERBOSE=y CONFIG_DEBUG_SYMBOLS=n diff --git a/nuttx/configs/sim/ostest/defconfig b/nuttx/configs/sim/ostest/defconfig index ba1d7a61d..01cad9c58 100644 --- a/nuttx/configs/sim/ostest/defconfig +++ b/nuttx/configs/sim/ostest/defconfig @@ -1,7 +1,7 @@ ############################################################################ # configs/sim/ostest/defconfig # -# Copyright (C) 2007-2009 Gregory Nutt. All rights reserved. +# Copyright (C) 2007-2010 Gregory Nutt. All rights reserved. # Author: Gregory Nutt <spudmonkey@racsa.co.cr> # # Redistribution and use in source and binary forms, with or without @@ -52,8 +52,8 @@ CONFIG_ARCH_BOARD_SIM=y # # General OS setup # -# CONFIG_EXAMPLE - identifies the subdirectory in examples -# that will be used in the build +# CONFIG_APP_DIR - Identifies the relative path to the directory +# that builds the application to link with NuttX. # CONFIG_DEBUG - enables built-in debug options # CONFIG_DEBUG_VERBOSE - enables verbose debug output # CONFIG_DEBUG_SYMBOLS - build without optimization and with @@ -114,7 +114,7 @@ CONFIG_ARCH_BOARD_SIM=y # desciptors by task_create() when a new task is started. If # set, all sockets will appear to be closed in the new task. # -CONFIG_EXAMPLE=ostest +CONFIG_APP_DIR=examples/ostest CONFIG_DEBUG=y CONFIG_DEBUG_VERBOSE=y CONFIG_DEBUG_SYMBOLS=n diff --git a/nuttx/configs/sim/pashello/defconfig b/nuttx/configs/sim/pashello/defconfig index 33694968e..7c8b356ae 100644 --- a/nuttx/configs/sim/pashello/defconfig +++ b/nuttx/configs/sim/pashello/defconfig @@ -1,7 +1,7 @@ ############################################################################ # configs/sim/pashello/defconfig # -# Copyright (C) 2007-2009 Gregory Nutt. All rights reserved. +# Copyright (C) 2007-2010 Gregory Nutt. All rights reserved. # Author: Gregory Nutt <spudmonkey@racsa.co.cr> # # Redistribution and use in source and binary forms, with or without @@ -52,8 +52,8 @@ CONFIG_ARCH_BOARD_SIM=y # # General OS setup # -# CONFIG_EXAMPLE - identifies the subdirectory in examples -# that will be used in the build +# CONFIG_APP_DIR - Identifies the relative path to the directory +# that builds the application to link with NuttX. # CONFIG_DEBUG - enables built-in debug options # CONFIG_DEBUG_VERBOSE - enables verbose debug output # CONFIG_DEBUG_SYMBOLS - build without optimization and with @@ -114,7 +114,7 @@ CONFIG_ARCH_BOARD_SIM=y # desciptors by task_create() when a new task is started. If # set, all sockets will appear to be closed in the new task. # -CONFIG_EXAMPLE=pashello +CONFIG_APP_DIR=examples/pashello CONFIG_DEBUG=n CONFIG_DEBUG_VERBOSE=n CONFIG_DEBUG_SYMBOLS=n diff --git a/nuttx/configs/skp16c26/ostest/defconfig b/nuttx/configs/skp16c26/ostest/defconfig index 4baa36c96..9132a4a05 100644 --- a/nuttx/configs/skp16c26/ostest/defconfig +++ b/nuttx/configs/skp16c26/ostest/defconfig @@ -1,7 +1,7 @@ ############################################################################ # configs/skp16c26/ostest/defconfig # -# Copyright (C) 2009 Gregory Nutt. All rights reserved. +# Copyright (C) 2009-2010 Gregory Nutt. All rights reserved. # Author: Gregory Nutt <spudmonkey@racsa.co.cr> # # Redistribution and use in source and binary forms, with or without @@ -150,8 +150,8 @@ CONFIG_HAVE_LIBM=n # # General OS setup # -# CONFIG_EXAMPLE - identifies the subdirectory in examples -# that will be used in the build +# CONFIG_APP_DIR - Identifies the relative path to the directory +# that builds the application to link with NuttX. # CONFIG_DEBUG - enables built-in debug options # CONFIG_DEBUG_VERBOSE - enables verbose debug output # CONFIG_DEBUG_SYMBOLS - build without optimization and with @@ -212,7 +212,7 @@ CONFIG_HAVE_LIBM=n # desciptors by task_create() when a new task is started. If # set, all sockets will appear to be closed in the new task. # -CONFIG_EXAMPLE=ostest +CONFIG_APP_DIR=examples/ostest CONFIG_DEBUG=n CONFIG_DEBUG_VERBOSE=n CONFIG_DEBUG_SYMBOLS=n diff --git a/nuttx/configs/stm3210e-eval/RIDE/defconfig b/nuttx/configs/stm3210e-eval/RIDE/defconfig index 5ad48fd6f..9c2a78c4d 100755 --- a/nuttx/configs/stm3210e-eval/RIDE/defconfig +++ b/nuttx/configs/stm3210e-eval/RIDE/defconfig @@ -1,7 +1,7 @@ ############################################################################ # configs/stm3210e-eval/RIDE/defconfig # -# Copyright (C) 2009 Gregory Nutt. All rights reserved. +# Copyright (C) 2009-2010 Gregory Nutt. All rights reserved. # Author: Gregory Nutt <spudmonkey@racsa.co.cr> # # Redistribution and use in source and binary forms, with or without @@ -226,8 +226,8 @@ CONFIG_HAVE_LIBM=n # # General OS setup # -# CONFIG_EXAMPLE - identifies the subdirectory in examples -# that will be used in the build +# CONFIG_APP_DIR - Identifies the relative path to the directory +# that builds the application to link with NuttX. # CONFIG_DEBUG - enables built-in debug options # CONFIG_DEBUG_VERBOSE - enables verbose debug output # CONFIG_DEBUG_SYMBOLS - build without optimization and with @@ -315,7 +315,7 @@ CONFIG_HAVE_LIBM=n # CONFIG_SIG_SIGWORK - The signal number that will be used to wake-up # the worker thread. Default: 4 # -CONFIG_EXAMPLE=null +CONFIG_APP_DIR=examples/null CONFIG_DEBUG=n CONFIG_DEBUG_VERBOSE=n CONFIG_DEBUG_SYMBOLS=n diff --git a/nuttx/configs/stm3210e-eval/nsh/defconfig b/nuttx/configs/stm3210e-eval/nsh/defconfig index 97e81e3d5..757c0ee45 100755 --- a/nuttx/configs/stm3210e-eval/nsh/defconfig +++ b/nuttx/configs/stm3210e-eval/nsh/defconfig @@ -1,7 +1,7 @@ ############################################################################ # configs/stm3210e-eval/nsh/defconfig # -# Copyright (C) 2009 Gregory Nutt. All rights reserved. +# Copyright (C) 2009-2010 Gregory Nutt. All rights reserved. # Author: Gregory Nutt <spudmonkey@racsa.co.cr> # # Redistribution and use in source and binary forms, with or without @@ -236,8 +236,8 @@ CONFIG_HAVE_LIBM=n # # General OS setup # -# CONFIG_EXAMPLE - identifies the subdirectory in examples -# that will be used in the build +# CONFIG_APP_DIR - Identifies the relative path to the directory +# that builds the application to link with NuttX. # CONFIG_DEBUG - enables built-in debug options # CONFIG_DEBUG_VERBOSE - enables verbose debug output # CONFIG_DEBUG_SYMBOLS - build without optimization and with @@ -325,7 +325,7 @@ CONFIG_HAVE_LIBM=n # CONFIG_SIG_SIGWORK - The signal number that will be used to wake-up # the worker thread. Default: 4 # -CONFIG_EXAMPLE=nsh +CONFIG_APP_DIR=examples/nsh CONFIG_DEBUG=n CONFIG_DEBUG_VERBOSE=n CONFIG_DEBUG_SYMBOLS=n diff --git a/nuttx/configs/stm3210e-eval/ostest/defconfig b/nuttx/configs/stm3210e-eval/ostest/defconfig index b6fd693a3..30c2346f8 100755 --- a/nuttx/configs/stm3210e-eval/ostest/defconfig +++ b/nuttx/configs/stm3210e-eval/ostest/defconfig @@ -238,8 +238,8 @@ CONFIG_HAVE_LIBM=n # # General OS setup # -# CONFIG_EXAMPLE - identifies the subdirectory in examples -# that will be used in the build +# CONFIG_APP_DIR - Identifies the relative path to the directory +# that builds the application to link with NuttX. # CONFIG_DEBUG - enables built-in debug options # CONFIG_DEBUG_VERBOSE - enables verbose debug output # CONFIG_DEBUG_SYMBOLS - build without optimization and with @@ -327,7 +327,7 @@ CONFIG_HAVE_LIBM=n # CONFIG_SIG_SIGWORK - The signal number that will be used to wake-up # the worker thread. Default: 4 # -CONFIG_EXAMPLE=ostest +CONFIG_APP_DIR=examples/ostest CONFIG_DEBUG=n CONFIG_DEBUG_VERBOSE=n CONFIG_DEBUG_SYMBOLS=n diff --git a/nuttx/configs/stm3210e-eval/src/Makefile b/nuttx/configs/stm3210e-eval/src/Makefile index 03d565a56..d291a1693 100755 --- a/nuttx/configs/stm3210e-eval/src/Makefile +++ b/nuttx/configs/stm3210e-eval/src/Makefile @@ -1,7 +1,7 @@ ############################################################################ # configs/stm3210e-eval/src/Makefile # -# Copyright (C) 2009 Gregory Nutt. All rights reserved. +# Copyright (C) 2009-2010 Gregory Nutt. All rights reserved. # Author: Gregory Nutt <spudmonkey@racsa.co.cr> # # Redistribution and use in source and binary forms, with or without @@ -46,7 +46,7 @@ CSRCS = up_boot.c up_leds.c up_buttons.c up_spi.c up_usbdev.c \ ifeq ($(CONFIG_EXAMPLES_NSH_ARCHINIT),y) CSRCS += up_nsh.c endif -ifeq ($(CONFIG_EXAMPLE),usbstorage) +ifeq ($(CONFIG_APP_DIR),examples/usbstorage) CSRCS += up_usbstrg.c endif COBJS = $(CSRCS:.c=$(OBJEXT)) diff --git a/nuttx/configs/stm3210e-eval/usbserial/defconfig b/nuttx/configs/stm3210e-eval/usbserial/defconfig index 77fd6212b..f328ffc54 100755 --- a/nuttx/configs/stm3210e-eval/usbserial/defconfig +++ b/nuttx/configs/stm3210e-eval/usbserial/defconfig @@ -1,7 +1,7 @@ ############################################################################ # configs/stm3210e-eval/usbserial/defconfig # -# Copyright (C) 2009 Gregory Nutt. All rights reserved. +# Copyright (C) 2009-2010 Gregory Nutt. All rights reserved. # Author: Gregory Nutt <spudmonkey@racsa.co.cr> # # Redistribution and use in source and binary forms, with or without @@ -238,8 +238,8 @@ CONFIG_HAVE_LIBM=n # # General OS setup # -# CONFIG_EXAMPLE - identifies the subdirectory in examples -# that will be used in the build +# CONFIG_APP_DIR - Identifies the relative path to the directory +# that builds the application to link with NuttX. # CONFIG_DEBUG - enables built-in debug options # CONFIG_DEBUG_VERBOSE - enables verbose debug output # CONFIG_DEBUG_SYMBOLS - build without optimization and with @@ -327,7 +327,7 @@ CONFIG_HAVE_LIBM=n # CONFIG_SIG_SIGWORK - The signal number that will be used to wake-up # the worker thread. Default: 4 # -CONFIG_EXAMPLE=usbserial +CONFIG_APP_DIR=examples/usbserial CONFIG_DEBUG=n CONFIG_DEBUG_VERBOSE=n CONFIG_DEBUG_USB=n diff --git a/nuttx/configs/stm3210e-eval/usbstorage/defconfig b/nuttx/configs/stm3210e-eval/usbstorage/defconfig index a1cd47c33..d0d665dcf 100755 --- a/nuttx/configs/stm3210e-eval/usbstorage/defconfig +++ b/nuttx/configs/stm3210e-eval/usbstorage/defconfig @@ -236,8 +236,8 @@ CONFIG_HAVE_LIBM=n # # General OS setup # -# CONFIG_EXAMPLE - identifies the subdirectory in examples -# that will be used in the build +# CONFIG_APP_DIR - Identifies the relative path to the directory +# that builds the application to link with NuttX. # CONFIG_DEBUG - enables built-in debug options # CONFIG_DEBUG_VERBOSE - enables verbose debug output # CONFIG_DEBUG_SYMBOLS - build without optimization and with @@ -325,7 +325,7 @@ CONFIG_HAVE_LIBM=n # CONFIG_SIG_SIGWORK - The signal number that will be used to wake-up # the worker thread. Default: 4 # -CONFIG_EXAMPLE=usbstorage +CONFIG_APP_DIR=examples/usbstorage CONFIG_DEBUG=n CONFIG_DEBUG_VERBOSE=n CONFIG_DEBUG_FS=n diff --git a/nuttx/configs/us7032evb1/nsh/defconfig b/nuttx/configs/us7032evb1/nsh/defconfig index 165f913cd..6c3d9ff1a 100644 --- a/nuttx/configs/us7032evb1/nsh/defconfig +++ b/nuttx/configs/us7032evb1/nsh/defconfig @@ -1,7 +1,7 @@ ############################################################################ # configs/us7032evb1/nsh/defconfig # -# Copyright (C) 2008, 2009 Gregory Nutt. All rights reserved. +# Copyright (C) 2008-2010 Gregory Nutt. All rights reserved. # Author: Gregory Nutt <spudmonkey@racsa.co.cr> # # Redistribution and use in source and binary forms, with or without @@ -154,8 +154,8 @@ CONFIG_HAVE_LIBM=n # # General OS setup # -# CONFIG_EXAMPLE - identifies the subdirectory in examples -# that will be used in the build +# CONFIG_APP_DIR - Identifies the relative path to the directory +# that builds the application to link with NuttX. # CONFIG_DEBUG - enables built-in debug options # CONFIG_DEBUG_VERBOSE - enables verbose debug output # CONFIG_DEBUG_SYMBOLS - build without optimization and with @@ -216,7 +216,7 @@ CONFIG_HAVE_LIBM=n # desciptors by task_create() when a new task is started. If # set, all sockets will appear to be closed in the new task. # -CONFIG_EXAMPLE=nsh +CONFIG_APP_DIR=examples/nsh CONFIG_DEBUG=n CONFIG_DEBUG_VERBOSE=n CONFIG_DEBUG_SYMBOLS=n diff --git a/nuttx/configs/us7032evb1/ostest/defconfig b/nuttx/configs/us7032evb1/ostest/defconfig index 595f7afc5..a06b33122 100644 --- a/nuttx/configs/us7032evb1/ostest/defconfig +++ b/nuttx/configs/us7032evb1/ostest/defconfig @@ -1,7 +1,7 @@ ############################################################################ # configs/us7032evb1/ostest/defconfig # -# Copyright (C) 2008, 2009 Gregory Nutt. All rights reserved. +# Copyright (C) 2008-2010 Gregory Nutt. All rights reserved. # Author: Gregory Nutt <spudmonkey@racsa.co.cr> # # Redistribution and use in source and binary forms, with or without @@ -154,8 +154,8 @@ CONFIG_HAVE_LIBM=n # # General OS setup # -# CONFIG_EXAMPLE - identifies the subdirectory in examples -# that will be used in the build +# CONFIG_APP_DIR - Identifies the relative path to the directory +# that builds the application to link with NuttX. # CONFIG_DEBUG - enables built-in debug options # CONFIG_DEBUG_VERBOSE - enables verbose debug output # CONFIG_DEBUG_SYMBOLS - build without optimization and with @@ -216,7 +216,7 @@ CONFIG_HAVE_LIBM=n # desciptors by task_create() when a new task is started. If # set, all sockets will appear to be closed in the new task. # -CONFIG_EXAMPLE=ostest +CONFIG_APP_DIR=examples/ostest CONFIG_DEBUG=n CONFIG_DEBUG_VERBOSE=n CONFIG_DEBUG_SYMBOLS=n diff --git a/nuttx/configs/xtrs/nsh/defconfig b/nuttx/configs/xtrs/nsh/defconfig index 414ee636e..8df793ebd 100644 --- a/nuttx/configs/xtrs/nsh/defconfig +++ b/nuttx/configs/xtrs/nsh/defconfig @@ -1,7 +1,7 @@ ############################################################################ # sim/xtrs/nsh/defconfig # -# Copyright (C) 2007-2009 Gregory Nutt. All rights reserved. +# Copyright (C) 2007-2010 Gregory Nutt. All rights reserved. # Author: Gregory Nutt <spudmonkey@racsa.co.cr> # # Redistribution and use in source and binary forms, with or without @@ -95,8 +95,8 @@ CONFIG_LINKER_ROM_AT_0000=y # # General OS setup # -# CONFIG_EXAMPLE - identifies the subdirectory in examples -# that will be used in the build +# CONFIG_APP_DIR - Identifies the relative path to the directory +# that builds the application to link with NuttX. # CONFIG_DEBUG - enables built-in debug options # CONFIG_DEBUG_VERBOSE - enables verbose debug output # CONFIG_DEBUG_SYMBOLS - build without optimization and with @@ -160,7 +160,7 @@ CONFIG_LINKER_ROM_AT_0000=y # desciptors by task_create() when a new task is started. If # set, all sockets will appear to be closed in the new task. # -CONFIG_EXAMPLE=nsh +CONFIG_APP_DIR=examples/nsh CONFIG_DEBUG=n CONFIG_DEBUG_VERBOSE=n CONFIG_DEBUG_SYMBOLS=n diff --git a/nuttx/configs/xtrs/ostest/defconfig b/nuttx/configs/xtrs/ostest/defconfig index b3f3373c1..f9f92ccba 100644 --- a/nuttx/configs/xtrs/ostest/defconfig +++ b/nuttx/configs/xtrs/ostest/defconfig @@ -1,7 +1,7 @@ ############################################################################ # configs/xtrs/ostest/defconfig # -# Copyright (C) 2008, 2009 Gregory Nutt. All rights reserved. +# Copyright (C) 2008-2010 Gregory Nutt. All rights reserved. # Author: Gregory Nutt <spudmonkey@racsa.co.cr> # # Redistribution and use in source and binary forms, with or without @@ -95,8 +95,8 @@ CONFIG_LINKER_ROM_AT_0000=y # # General OS setup # -# CONFIG_EXAMPLE - identifies the subdirectory in examples -# that will be used in the build +# CONFIG_APP_DIR - Identifies the relative path to the directory +# that builds the application to link with NuttX. # CONFIG_DEBUG - enables built-in debug options # CONFIG_DEBUG_VERBOSE - enables verbose debug output # CONFIG_DEBUG_SYMBOLS - build without optimization and with @@ -160,7 +160,7 @@ CONFIG_LINKER_ROM_AT_0000=y # desciptors by task_create() when a new task is started. If # set, all sockets will appear to be closed in the new task. # -CONFIG_EXAMPLE=ostest +CONFIG_APP_DIR=examples/ostest CONFIG_DEBUG=n CONFIG_DEBUG_VERBOSE=n CONFIG_DEBUG_SYMBOLS=n diff --git a/nuttx/configs/xtrs/pashello/defconfig b/nuttx/configs/xtrs/pashello/defconfig index 10612e62d..e40a1c00f 100644 --- a/nuttx/configs/xtrs/pashello/defconfig +++ b/nuttx/configs/xtrs/pashello/defconfig @@ -1,7 +1,7 @@ ############################################################################ # configs/xtrs/pashello/defconfig # -# Copyright (C) 2008, 2009 Gregory Nutt. All rights reserved. +# Copyright (C) 2008-2010 Gregory Nutt. All rights reserved. # Author: Gregory Nutt <spudmonkey@racsa.co.cr> # # Redistribution and use in source and binary forms, with or without @@ -95,8 +95,8 @@ CONFIG_LINKER_ROM_AT_0000=y # # General OS setup # -# CONFIG_EXAMPLE - identifies the subdirectory in examples -# that will be used in the build +# CONFIG_APP_DIR - Identifies the relative path to the directory +# that builds the application to link with NuttX. # CONFIG_DEBUG - enables built-in debug options # CONFIG_DEBUG_VERBOSE - enables verbose debug output # CONFIG_DEBUG_SYMBOLS - build without optimization and with @@ -160,7 +160,7 @@ CONFIG_LINKER_ROM_AT_0000=y # desciptors by task_create() when a new task is started. If # set, all sockets will appear to be closed in the new task. # -CONFIG_EXAMPLE=pashello +CONFIG_APP_DIR=examples/pashello CONFIG_DEBUG=n CONFIG_DEBUG_VERBOSE=n CONFIG_DEBUG_SYMBOLS=n diff --git a/nuttx/configs/z16f2800100zcog/ostest/defconfig b/nuttx/configs/z16f2800100zcog/ostest/defconfig index b453d0235..d77f486b8 100644 --- a/nuttx/configs/z16f2800100zcog/ostest/defconfig +++ b/nuttx/configs/z16f2800100zcog/ostest/defconfig @@ -1,7 +1,7 @@ ############################################################################ # configs/z16f2800100zcog/ostest/defconfig # -# Copyright (C) 2008, 2009 Gregory Nutt. All rights reserved. +# Copyright (C) 2008-2010 Gregory Nutt. All rights reserved. # Author: Gregory Nutt <spudmonkey@racsa.co.cr> # # Redistribution and use in source and binary forms, with or without @@ -125,8 +125,8 @@ CONFIG_HAVE_LIBM=n # # General OS setup # -# CONFIG_EXAMPLE - identifies the subdirectory in examples -# that will be used in the build +# CONFIG_APP_DIR - Identifies the relative path to the directory +# that builds the application to link with NuttX. # CONFIG_DEBUG - enables built-in debug options # CONFIG_DEBUG_VERBOSE - enables verbose debug output # CONFIG_DEBUG_SYMBOLS - build without optimization and with @@ -189,7 +189,7 @@ CONFIG_HAVE_LIBM=n # desciptors by task_create() when a new task is started. If # set, all sockets will appear to be closed in the new task. # -CONFIG_EXAMPLE=ostest +CONFIG_APP_DIR=examples/ostest CONFIG_DEBUG=y CONFIG_DEBUG_VERBOSE=n CONFIG_DEBUG_SYMBOLS=n diff --git a/nuttx/configs/z16f2800100zcog/pashello/defconfig b/nuttx/configs/z16f2800100zcog/pashello/defconfig index 257bc7380..61409a6af 100644 --- a/nuttx/configs/z16f2800100zcog/pashello/defconfig +++ b/nuttx/configs/z16f2800100zcog/pashello/defconfig @@ -1,7 +1,7 @@ ############################################################################ # configs/z16f2800100zcog/pashello/defconfig # -# Copyright (C) 2008, 2009 Gregory Nutt. All rights reserved. +# Copyright (C) 2008-2010 Gregory Nutt. All rights reserved. # Author: Gregory Nutt <spudmonkey@racsa.co.cr> # # Redistribution and use in source and binary forms, with or without @@ -125,8 +125,8 @@ CONFIG_HAVE_LIBM=n # # General OS setup # -# CONFIG_EXAMPLE - identifies the subdirectory in examples -# that will be used in the build +# CONFIG_APP_DIR - Identifies the relative path to the directory +# that builds the application to link with NuttX. # CONFIG_DEBUG - enables built-in debug options # CONFIG_DEBUG_VERBOSE - enables verbose debug output # CONFIG_DEBUG_SYMBOLS - build without optimization and with @@ -189,7 +189,7 @@ CONFIG_HAVE_LIBM=n # desciptors by task_create() when a new task is started. If # set, all sockets will appear to be closed in the new task. # -CONFIG_EXAMPLE=pashello +CONFIG_APP_DIR=examples/pashello CONFIG_DEBUG=y CONFIG_DEBUG_VERBOSE=n CONFIG_DEBUG_SYMBOLS=n diff --git a/nuttx/configs/z80sim/nsh/defconfig b/nuttx/configs/z80sim/nsh/defconfig index 10e7a4651..3616c0f35 100644 --- a/nuttx/configs/z80sim/nsh/defconfig +++ b/nuttx/configs/z80sim/nsh/defconfig @@ -1,7 +1,7 @@ ############################################################################ # sim/z80sim/nsh/defconfig # -# Copyright (C) 2007-2009 Gregory Nutt. All rights reserved. +# Copyright (C) 2007-2010 Gregory Nutt. All rights reserved. # Author: Gregory Nutt <spudmonkey@racsa.co.cr> # # Redistribution and use in source and binary forms, with or without @@ -85,8 +85,8 @@ CONFIG_HAVE_LIBM=n # # General OS setup # -# CONFIG_EXAMPLE - identifies the subdirectory in examples -# that will be used in the build +# CONFIG_APP_DIR - Identifies the relative path to the directory +# that builds the application to link with NuttX. # CONFIG_DEBUG - enables built-in debug options # CONFIG_DEBUG_VERBOSE - enables verbose debug output # CONFIG_DEBUG_SYMBOLS - build without optimization and with @@ -150,7 +150,7 @@ CONFIG_HAVE_LIBM=n # desciptors by task_create() when a new task is started. If # set, all sockets will appear to be closed in the new task. # -CONFIG_EXAMPLE=nsh +CONFIG_APP_DIR=examples/nsh CONFIG_DEBUG=n CONFIG_DEBUG_VERBOSE=n CONFIG_DEBUG_SYMBOLS=n diff --git a/nuttx/configs/z80sim/ostest/defconfig b/nuttx/configs/z80sim/ostest/defconfig index 301fa4e4c..2c6fc0fda 100644 --- a/nuttx/configs/z80sim/ostest/defconfig +++ b/nuttx/configs/z80sim/ostest/defconfig @@ -1,7 +1,7 @@ ############################################################################ # configs/z80sim/ostest/defconfig # -# Copyright (C) 2007-2009 Gregory Nutt. All rights reserved. +# Copyright (C) 2007-2010 Gregory Nutt. All rights reserved. # Author: Gregory Nutt <spudmonkey@racsa.co.cr> # # Redistribution and use in source and binary forms, with or without @@ -85,8 +85,8 @@ CONFIG_HAVE_LIBM=n # # General OS setup # -# CONFIG_EXAMPLE - identifies the subdirectory in examples -# that will be used in the build +# CONFIG_APP_DIR - Identifies the relative path to the directory +# that builds the application to link with NuttX. # CONFIG_DEBUG - enables built-in debug options # CONFIG_DEBUG_VERBOSE - enables verbose debug output # CONFIG_DEBUG_SYMBOLS - build without optimization and with @@ -150,7 +150,7 @@ CONFIG_HAVE_LIBM=n # desciptors by task_create() when a new task is started. If # set, all sockets will appear to be closed in the new task. # -CONFIG_EXAMPLE=ostest +CONFIG_APP_DIR=examples/ostest CONFIG_DEBUG=n CONFIG_DEBUG_VERBOSE=n CONFIG_DEBUG_SYMBOLS=n diff --git a/nuttx/configs/z80sim/pashello/defconfig b/nuttx/configs/z80sim/pashello/defconfig index 7b95e2bd1..6a740d231 100644 --- a/nuttx/configs/z80sim/pashello/defconfig +++ b/nuttx/configs/z80sim/pashello/defconfig @@ -1,7 +1,7 @@ ############################################################################ # configs/z80sim/pashello/defconfig # -# Copyright (C) 2007-2009 Gregory Nutt. All rights reserved. +# Copyright (C) 2007-2010 Gregory Nutt. All rights reserved. # Author: Gregory Nutt <spudmonkey@racsa.co.cr> # # Redistribution and use in source and binary forms, with or without @@ -85,8 +85,8 @@ CONFIG_HAVE_LIBM=n # # General OS setup # -# CONFIG_EXAMPLE - identifies the subdirectory in examples -# that will be used in the build +# CONFIG_APP_DIR - Identifies the relative path to the directory +# that builds the application to link with NuttX. # CONFIG_DEBUG - enables built-in debug options # CONFIG_DEBUG_VERBOSE - enables verbose debug output # CONFIG_DEBUG_SYMBOLS - build without optimization and with @@ -150,7 +150,7 @@ CONFIG_HAVE_LIBM=n # desciptors by task_create() when a new task is started. If # set, all sockets will appear to be closed in the new task. # -CONFIG_EXAMPLE=pashello +CONFIG_APP_DIR=examples/pashello CONFIG_DEBUG=n CONFIG_DEBUG_VERBOSE=n CONFIG_DEBUG_SYMBOLS=n diff --git a/nuttx/configs/z8encore000zco/ostest/defconfig b/nuttx/configs/z8encore000zco/ostest/defconfig index 24b076723..73b8490c8 100644 --- a/nuttx/configs/z8encore000zco/ostest/defconfig +++ b/nuttx/configs/z8encore000zco/ostest/defconfig @@ -1,7 +1,7 @@ ############################################################################ # configs/z8encore000zco/ostest/defconfig # -# Copyright (C) 2008, 2009 Gregory Nutt. All rights reserved. +# Copyright (C) 2008-2010 Gregory Nutt. All rights reserved. # Author: Gregory Nutt <spudmonkey@racsa.co.cr> # # Redistribution and use in source and binary forms, with or without @@ -117,8 +117,8 @@ CONFIG_HAVE_LIBM=n # # General OS setup # -# CONFIG_EXAMPLE - identifies the subdirectory in examples -# that will be used in the build +# CONFIG_APP_DIR - Identifies the relative path to the directory +# that builds the application to link with NuttX. # CONFIG_DEBUG - enables built-in debug options # CONFIG_DEBUG_VERBOSE - enables verbose debug output # CONFIG_DEBUG_SYMBOLS - build without optimization and with @@ -184,7 +184,7 @@ CONFIG_HAVE_LIBM=n # desciptors by task_create() when a new task is started. If # set, all sockets will appear to be closed in the new task. # -CONFIG_EXAMPLE=ostest +CONFIG_APP_DIR=examples/ostest CONFIG_DEBUG=y CONFIG_DEBUG_VERBOSE=n CONFIG_DEBUG_SYMBOLS=n diff --git a/nuttx/configs/z8f64200100kit/ostest/defconfig b/nuttx/configs/z8f64200100kit/ostest/defconfig index 04388fc02..dc070f143 100644 --- a/nuttx/configs/z8f64200100kit/ostest/defconfig +++ b/nuttx/configs/z8f64200100kit/ostest/defconfig @@ -1,7 +1,7 @@ ############################################################################ # configs/z8f64200100kit/ostest/defconfig # -# Copyright (C) 2008 Gregory Nutt. All rights reserved. +# Copyright (C) 2008, 2010 Gregory Nutt. All rights reserved. # Author: Gregory Nutt <spudmonkey@racsa.co.cr> # # Redistribution and use in source and binary forms, with or without @@ -117,8 +117,8 @@ CONFIG_HAVE_LIBM=n # # General OS setup # -# CONFIG_EXAMPLE - identifies the subdirectory in examples -# that will be used in the build +# CONFIG_APP_DIR - Identifies the relative path to the directory +# that builds the application to link with NuttX. # CONFIG_DEBUG - enables built-in debug options # CONFIG_DEBUG_VERBOSE - enables verbose debug output # CONFIG_DEBUG_SYMBOLS - build without optimization and with @@ -184,7 +184,7 @@ CONFIG_HAVE_LIBM=n # desciptors by task_create() when a new task is started. If # set, all sockets will appear to be closed in the new task. # -CONFIG_EXAMPLE=ostest +CONFIG_APP_DIR=examples/ostest CONFIG_DEBUG=y CONFIG_DEBUG_VERBOSE=n CONFIG_DEBUG_SYMBOLS=n |