diff options
Diffstat (limited to 'nuttx/configs')
154 files changed, 447 insertions, 447 deletions
diff --git a/nuttx/configs/Kconfig b/nuttx/configs/Kconfig index 752a5b098..600e74ef4 100644 --- a/nuttx/configs/Kconfig +++ b/nuttx/configs/Kconfig @@ -42,7 +42,7 @@ config ARCH_BOARD_C5471EVM This is a port to the Spectrum Digital C5471 evaluation board. The TMS320C5471 is a dual core processor from TI with an ARM7TDMI general purpose processor and a c54 DSP. It is also known as TMS320DA180 or just DA180. - NuttX runs on the ARM core and is built with a GNU arm-elf toolchain*. + NuttX runs on the ARM core and is built with a GNU arm-nuttx-elf toolchain*. This port is complete and verified. config ARCH_BOARD_COMPALE88 @@ -80,7 +80,7 @@ config ARCH_BOARD_EA3131 select ARCH_HAVE_BUTTONS ---help--- Embedded Artists EA3131 Development board. This board is based on the - an NXP LPC3131 MCU. This OS is built with the arm-elf toolchain*. + an NXP LPC3131 MCU. This OS is built with the arm-nuttx-elf toolchain*. STATUS: This port is complete and mature. config ARCH_BOARD_EA3152 @@ -90,7 +90,7 @@ config ARCH_BOARD_EA3152 select ARCH_HAVE_BUTTONS ---help--- Embedded Artists EA3152 Development board. This board is based on the - an NXP LPC3152 MCU. This OS is built with the arm-elf toolchain*. + an NXP LPC3152 MCU. This OS is built with the arm-nuttx-elf toolchain*. STATUS: This port is has not be exercised well, but since it is a simple derivative of the ea3131, it should be fully functional. @@ -101,7 +101,7 @@ config ARCH_BOARD_EAGLE100 ---help--- Micromint Eagle-100 Development board. This board is based on the an ARM Cortex-M3 MCU, the Luminary LM3S6918. This OS is built with the - arm-elf toolchain*. STATUS: This port is complete and mature. + arm-nuttx-elf toolchain*. STATUS: This port is complete and mature. config ARCH_BOARD_EKK_LM3S9B96 bool "TI/Stellaris EKK-LM3S9B96" @@ -184,7 +184,7 @@ config ARCH_BOARD_LM3S6965EK ---help--- Stellaris LM3S6965 Evaluation Kit. This board is based on the an ARM Cortex-M3 MCU, the Luminary/TI LM3S6965. This OS is built with the - arm-elf toolchain*. STATUS: This port is complete and mature. + arm-nuttx-elf toolchain*. STATUS: This port is complete and mature. config ARCH_BOARD_LM3S8962EK bool "Stellaris LMS38962 Evaluation Kit" @@ -215,7 +215,7 @@ config ARCH_BOARD_M68332EVB depends on ARCH_M68332 ---help--- This is a work in progress for the venerable m68322evb board from - Motorola. This OS is also built with the arm-elf toolchain. STATUS: + Motorola. This OS is also built with the arm-nuttx-elf toolchain. STATUS: This port was never completed. config ARCH_BOARD_MBED @@ -225,7 +225,7 @@ config ARCH_BOARD_MBED ---help--- The configurations in this directory support the mbed board (http://mbed.org) that features the NXP LPC1768 microcontroller. This OS is also built - with the arm-elf toolchain*. STATUS: Contributed. + with the arm-nuttx-elf toolchain*. STATUS: Contributed. config ARCH_BOARD_MCU123 bool "mcu123.com LPC2148 Development Board" @@ -233,7 +233,7 @@ config ARCH_BOARD_MCU123 select ARCH_HAVE_LEDS ---help--- This port is for the NXP LPC2148 as provided on the mcu123.com - lpc214x development board. This OS is also built with the arm-elf + lpc214x development board. This OS is also built with the arm-nuttx-elf toolchain*. The port supports serial, timer0, spi, and usb. config ARCH_BOARD_MICROPENDOUS3 @@ -270,7 +270,7 @@ config ARCH_BOARD_NTOSD_DM320 depends on ARCH_CHIP_DM320 select ARCH_HAVE_LEDS ---help--- - This port uses the Neuros OSD v1.0 Dev Board with a GNU arm-elf + This port uses the Neuros OSD v1.0 Dev Board with a GNU arm-nuttx-elf toolchain*: see http://wiki.neurostechnology.com/index.php/OSD_1.0_Developer_Home @@ -316,7 +316,7 @@ config ARCH_BOARD_OLIMEXLPC2378 depends on ARCH_CHIP_LPC2378 select ARCH_HAVE_LEDS ---help--- - This port uses the Olimex-lpc2378 board and a GNU arm-elf toolchain* under + This port uses the Olimex-lpc2378 board and a GNU arm-nuttx-elf toolchain* under Linux or Cygwin. STATUS: ostest and NSH configurations available. This port for the NXP LPC2378 was contributed by Rommel Marcelo. @@ -326,7 +326,7 @@ config ARCH_BOARD_OLIMEX_STRP711 select ARCH_HAVE_LEDS select ARCH_HAVE_BUTTONS ---help--- - This port uses the Olimex STR-P711 board and a GNU arm-elf toolchain* under + This port uses the Olimex STR-P711 board and a GNU arm-nuttx-elf toolchain* under Linux or Cygwin. See the http://www.olimex.com/dev/str-p711.html" for further information. STATUS: Configurations for the basic OS test and NSH are complete and verified. @@ -335,7 +335,7 @@ config ARCH_BOARD_OLIMEX_STM32P107 bool "Olimex STM32 P107 board" depends on ARCH_CHIP_STM32F107VC ---help--- - This port uses the Olimex STM32 P107 board and a GNU arm-elf toolchain* under + This port uses the Olimex STM32 P107 board and a GNU arm-nuttx-elf toolchain* under Linux or Cygwin. See the http://www.olimex.com for further information. This board features the STMicro STM32F107VC MCU @@ -411,7 +411,7 @@ config ARCH_BOARD_SHENZHOU select ARCH_HAVE_BUTTONS select ARCH_HAVE_IRQBUTTONS ---help--- - This port uses the Shenzhou STM32 F107 board and a GNU arm-elf toolchain* under + This port uses the Shenzhou STM32 F107 board and a GNU arm-nuttx-elf toolchain* under Linux or Cygwin. See the http://www.armjishu.com for further information. This board features the STMicro STM32F107VC MCU diff --git a/nuttx/configs/README.txt b/nuttx/configs/README.txt index 5bbec874f..e6bde645d 100644 --- a/nuttx/configs/README.txt +++ b/nuttx/configs/README.txt @@ -1524,7 +1524,7 @@ configs/c5471evm This is a port to the Spectrum Digital C5471 evaluation board. The TMS320C5471 is a dual core processor from TI with an ARM7TDMI general purpose processor and a c54 DSP. It is also known as TMS320DA180 or just DA180. - NuttX runs on the ARM core and is built with a GNU arm-elf toolchain*. + NuttX runs on the ARM core and is built with a GNU arm-nuttx-elf toolchain*. This port is complete and verified. configs/compal_e88 and compal_e99 @@ -1540,19 +1540,19 @@ configs/demo9s12ne64 configs/ea3131 Embedded Artists EA3131 Development board. This board is based on the - an NXP LPC3131 MCU. This OS is built with the arm-elf toolchain*. + an NXP LPC3131 MCU. This OS is built with the arm-nuttx-elf toolchain*. STATUS: This port is complete and mature. configs/ea3152 Embedded Artists EA3152 Development board. This board is based on the - an NXP LPC3152 MCU. This OS is built with the arm-elf toolchain*. + an NXP LPC3152 MCU. This OS is built with the arm-nuttx-elf toolchain*. STATUS: This port is has not be exercised well, but since it is a simple derivative of the ea3131, it should be fully functional. configs/eagle100 Micromint Eagle-100 Development board. This board is based on the an ARM Cortex-M3 MCU, the Luminary LM3S6918. This OS is built with the - arm-elf toolchain*. STATUS: This port is complete and mature. + arm-nuttx-elf toolchain*. STATUS: This port is complete and mature. configs/ekk-lm3s9b96 TI/Stellaris EKK-LM3S9B96 board. This board is based on the @@ -1591,7 +1591,7 @@ configs/lm3s6432-s2e configs/lm3s6965-ek Stellaris LM3S6965 Evaluation Kit. This board is based on the an ARM Cortex-M3 MCU, the Luminary/TI LM3S6965. This OS is built with the - arm-elf toolchain*. STATUS: This port is complete and mature. + arm-nuttx-elf toolchain*. STATUS: This port is complete and mature. configs/lm3s8962-ek Stellaris LMS38962 Evaluation Kit. @@ -1607,17 +1607,17 @@ configs/lpc4330-xplorer configs/m68322evb This is a work in progress for the venerable m68322evb board from - Motorola. This OS is also built with the arm-elf toolchain*. STATUS: + Motorola. This OS is also built with the arm-nuttx-elf toolchain*. STATUS: This port was never completed. configs/mbed The configurations in this directory support the mbed board (http://mbed.org) that features the NXP LPC1768 microcontroller. This OS is also built - with the arm-elf toolchain*. STATUS: Contributed. + with the arm-nuttx-elf toolchain*. STATUS: Contributed. configs/mcu123-lpc214x This port is for the NXP LPC2148 as provided on the mcu123.com - lpc214x development board. This OS is also built with the arm-elf + lpc214x development board. This OS is also built with the arm-nuttx-elf toolchain*. The port supports serial, timer0, spi, and usb. configs/micropendous3 @@ -1642,7 +1642,7 @@ configs/ne64badge not yet been fully tested. configs/ntosd-dm320 - This port uses the Neuros OSD v1.0 Dev Board with a GNU arm-elf + This port uses the Neuros OSD v1.0 Dev Board with a GNU arm-nuttx-elf toolchain*: see http://wiki.neurostechnology.com/index.php/OSD_1.0_Developer_Home @@ -1666,18 +1666,18 @@ configs/olimex-lpc1766stk Linux or Cygwin. STATUS: Complete and mature. configs/olimex-lpc2378 - This port uses the Olimex-lpc2378 board and a GNU arm-elf toolchain* under + This port uses the Olimex-lpc2378 board and a GNU arm-nuttx-elf toolchain* under Linux or Cygwin. STATUS: ostest and NSH configurations available. This port for the NXP LPC2378 was contributed by Rommel Marcelo. configs/olimex-stm32-p107 - This port uses the Olimex STM32-P107 board (STM32F107VC) and a GNU arm-elf + This port uses the Olimex STM32-P107 board (STM32F107VC) and a GNU arm-nuttx-elf toolchain* under Linux or Cygwin. See the https://www.olimex.com/dev/stm32-p107.html for further information. Contributed by Max Holtzberg. STATUS: Configurations for the basic OS test and NSH are available and verified. configs/olimex-strp711 - This port uses the Olimex STR-P711 board and a GNU arm-elf toolchain* under + This port uses the Olimex STR-P711 board and a GNU arm-nuttx-elf toolchain* under Linux or Cygwin. See the http://www.olimex.com/dev/str-p711.html" for further information. STATUS: Configurations for the basic OS test and NSH are complete and verified. diff --git a/nuttx/configs/amber/hello/Make.defs b/nuttx/configs/amber/hello/Make.defs index 4474e1621..66f3ff799 100644 --- a/nuttx/configs/amber/hello/Make.defs +++ b/nuttx/configs/amber/hello/Make.defs @@ -57,7 +57,7 @@ endif ifeq ($(CONFIG_AVR_BUILDROOT),y) # NuttX buildroot GCC toolchain under Linux or Cygwin - CROSSDEV = avr-elf- + CROSSDEV = avr-nuttx-elf- MAXOPTIMIZATION = -O2 ARCHCPUFLAGS = -mmcu=atmega128 LDFLAGS += -nostartfiles -nodefaultlibs diff --git a/nuttx/configs/c5471evm/httpd/Make.defs b/nuttx/configs/c5471evm/httpd/Make.defs index 6ff007708..ffc267530 100644 --- a/nuttx/configs/c5471evm/httpd/Make.defs +++ b/nuttx/configs/c5471evm/httpd/Make.defs @@ -36,7 +36,7 @@ include ${TOPDIR}/.config include ${TOPDIR}/tools/Config.mk -CROSSDEV = arm-elf- +CROSSDEV = arm-nuttx-elf- CC = $(CROSSDEV)gcc CPP = $(CROSSDEV)gcc -E LD = $(CROSSDEV)ld diff --git a/nuttx/configs/c5471evm/nettest/Make.defs b/nuttx/configs/c5471evm/nettest/Make.defs index d66bb564f..e784c1119 100644 --- a/nuttx/configs/c5471evm/nettest/Make.defs +++ b/nuttx/configs/c5471evm/nettest/Make.defs @@ -36,7 +36,7 @@ include ${TOPDIR}/.config include ${TOPDIR}/tools/Config.mk -CROSSDEV = arm-elf- +CROSSDEV = arm-nuttx-elf- CC = $(CROSSDEV)gcc CPP = $(CROSSDEV)gcc -E LD = $(CROSSDEV)ld diff --git a/nuttx/configs/c5471evm/nsh/Make.defs b/nuttx/configs/c5471evm/nsh/Make.defs index 2ffb69ffd..d9e569158 100644 --- a/nuttx/configs/c5471evm/nsh/Make.defs +++ b/nuttx/configs/c5471evm/nsh/Make.defs @@ -36,7 +36,7 @@ include ${TOPDIR}/.config include ${TOPDIR}/tools/Config.mk -CROSSDEV = arm-elf- +CROSSDEV = arm-nuttx-elf- CC = $(CROSSDEV)gcc CPP = $(CROSSDEV)gcc -E LD = $(CROSSDEV)ld diff --git a/nuttx/configs/c5471evm/ostest/Make.defs b/nuttx/configs/c5471evm/ostest/Make.defs index 04d6e0971..9cbfc1d1d 100644 --- a/nuttx/configs/c5471evm/ostest/Make.defs +++ b/nuttx/configs/c5471evm/ostest/Make.defs @@ -36,7 +36,7 @@ include ${TOPDIR}/.config include ${TOPDIR}/tools/Config.mk -CROSSDEV = arm-elf- +CROSSDEV = arm-nuttx-elf- CC = $(CROSSDEV)gcc CPP = $(CROSSDEV)gcc -E LD = $(CROSSDEV)ld diff --git a/nuttx/configs/compal_e88/nsh_highram/Make.defs b/nuttx/configs/compal_e88/nsh_highram/Make.defs index b3c04930d..e99d5635d 100644 --- a/nuttx/configs/compal_e88/nsh_highram/Make.defs +++ b/nuttx/configs/compal_e88/nsh_highram/Make.defs @@ -45,7 +45,7 @@ EXTRA_LIBS = $(OSMODIR)/src/target/firmware/comm/libcomm.a \ # ^^^ Stupid hack! Why do I have to put it twice??? endif -CROSSDEV = arm-elf- +CROSSDEV = arm-nuttx-elf- CC = $(CROSSDEV)gcc CPP = $(CROSSDEV)gcc -E LD = $(CROSSDEV)ld diff --git a/nuttx/configs/compal_e99/nsh_compalram/Make.defs b/nuttx/configs/compal_e99/nsh_compalram/Make.defs index cec8bdd1f..4759fc76a 100644 --- a/nuttx/configs/compal_e99/nsh_compalram/Make.defs +++ b/nuttx/configs/compal_e99/nsh_compalram/Make.defs @@ -45,7 +45,7 @@ EXTRA_LIBS = $(OSMODIR)/src/target/firmware/comm/libcomm.a \ # ^^^ Stupid hack! Why do I have to put it twice??? endif -CROSSDEV = arm-elf- +CROSSDEV = arm-nuttx-elf- CC = $(CROSSDEV)gcc CPP = $(CROSSDEV)gcc -E LD = $(CROSSDEV)ld diff --git a/nuttx/configs/compal_e99/nsh_highram/Make.defs b/nuttx/configs/compal_e99/nsh_highram/Make.defs index b3c04930d..e99d5635d 100644 --- a/nuttx/configs/compal_e99/nsh_highram/Make.defs +++ b/nuttx/configs/compal_e99/nsh_highram/Make.defs @@ -45,7 +45,7 @@ EXTRA_LIBS = $(OSMODIR)/src/target/firmware/comm/libcomm.a \ # ^^^ Stupid hack! Why do I have to put it twice??? endif -CROSSDEV = arm-elf- +CROSSDEV = arm-nuttx-elf- CC = $(CROSSDEV)gcc CPP = $(CROSSDEV)gcc -E LD = $(CROSSDEV)ld diff --git a/nuttx/configs/demo9s12ne64/ostest/Make.defs b/nuttx/configs/demo9s12ne64/ostest/Make.defs index 9ad5036c3..727ebb561 100644 --- a/nuttx/configs/demo9s12ne64/ostest/Make.defs +++ b/nuttx/configs/demo9s12ne64/ostest/Make.defs @@ -39,7 +39,7 @@ include ${TOPDIR}/tools/Config.mk # Setup for the selected toolchain # NuttX buildroot under Linux or Cygwin -CROSSDEV = m9s12x-elf- +CROSSDEV = m9s12x-nuttx-elf- MAXOPTIMIZATION = -Os WINTOOL = n diff --git a/nuttx/configs/ea3131/README.txt b/nuttx/configs/ea3131/README.txt index c237345d1..a99011ec5 100644 --- a/nuttx/configs/ea3131/README.txt +++ b/nuttx/configs/ea3131/README.txt @@ -265,7 +265,7 @@ Using OpenOCD and GDB Once the OpenOCD daemon has been started, you can connect to it via GDB using the following GDB command: - arm-elf-gdb + arm-nuttx-elf-gdb (gdb) target remote localhost:3333 And you can load the NuttX ELF file: diff --git a/nuttx/configs/ea3131/nsh/Make.defs b/nuttx/configs/ea3131/nsh/Make.defs index 9ef28c363..cd49f56af 100644 --- a/nuttx/configs/ea3131/nsh/Make.defs +++ b/nuttx/configs/ea3131/nsh/Make.defs @@ -56,7 +56,7 @@ ifeq ($(CONFIG_LPC31_DEVKITARM),y) endif ifeq ($(CONFIG_LPC31_BUILDROOT),y) # NuttX buildroot under Linux or Cygwin - CROSSDEV = arm-elf- + CROSSDEV = arm-nuttx-elf- MAXOPTIMIZATION = -Os endif diff --git a/nuttx/configs/ea3131/ostest/Make.defs b/nuttx/configs/ea3131/ostest/Make.defs index 3528b80b5..f07f4d452 100644 --- a/nuttx/configs/ea3131/ostest/Make.defs +++ b/nuttx/configs/ea3131/ostest/Make.defs @@ -56,7 +56,7 @@ ifeq ($(CONFIG_LPC31_DEVKITARM),y) endif ifeq ($(CONFIG_LPC31_BUILDROOT),y) # NuttX buildroot under Linux or Cygwin - CROSSDEV = arm-elf- + CROSSDEV = arm-nuttx-elf- MAXOPTIMIZATION = -Os endif diff --git a/nuttx/configs/ea3131/pgnsh/Make.defs b/nuttx/configs/ea3131/pgnsh/Make.defs index 7dace9854..1097a8d72 100644 --- a/nuttx/configs/ea3131/pgnsh/Make.defs +++ b/nuttx/configs/ea3131/pgnsh/Make.defs @@ -56,7 +56,7 @@ ifeq ($(CONFIG_LPC31_DEVKITARM),y) endif ifeq ($(CONFIG_LPC31_BUILDROOT),y) # NuttX buildroot under Linux or Cygwin - CROSSDEV = arm-elf- + CROSSDEV = arm-nuttx-elf- MAXOPTIMIZATION = -Os endif diff --git a/nuttx/configs/ea3131/usbserial/Make.defs b/nuttx/configs/ea3131/usbserial/Make.defs index eb0da53f5..3fe5f8f93 100644 --- a/nuttx/configs/ea3131/usbserial/Make.defs +++ b/nuttx/configs/ea3131/usbserial/Make.defs @@ -56,7 +56,7 @@ ifeq ($(CONFIG_LPC31_DEVKITARM),y) endif ifeq ($(CONFIG_LPC31_BUILDROOT),y) # NuttX buildroot under Linux or Cygwin - CROSSDEV = arm-elf- + CROSSDEV = arm-nuttx-elf- MAXOPTIMIZATION = -Os endif diff --git a/nuttx/configs/ea3131/usbstorage/Make.defs b/nuttx/configs/ea3131/usbstorage/Make.defs index fc679e24c..de351b256 100644 --- a/nuttx/configs/ea3131/usbstorage/Make.defs +++ b/nuttx/configs/ea3131/usbstorage/Make.defs @@ -56,7 +56,7 @@ ifeq ($(CONFIG_LPC31_DEVKITARM),y) endif ifeq ($(CONFIG_LPC31_BUILDROOT),y) # NuttX buildroot under Linux or Cygwin - CROSSDEV = arm-elf- + CROSSDEV = arm-nuttx-elf- MAXOPTIMIZATION = -Os endif diff --git a/nuttx/configs/ea3152/README.txt b/nuttx/configs/ea3152/README.txt index 90be2a220..5b6eb17a9 100644 --- a/nuttx/configs/ea3152/README.txt +++ b/nuttx/configs/ea3152/README.txt @@ -264,7 +264,7 @@ Using OpenOCD and GDB Once the OpenOCD daemon has been started, you can connect to it via GDB using the following GDB command: - arm-elf-gdb + arm-nuttx-elf-gdb (gdb) target remote localhost:3333 And you can load the NuttX ELF file: diff --git a/nuttx/configs/ea3152/ostest/Make.defs b/nuttx/configs/ea3152/ostest/Make.defs index 8872b60e4..9bb350e36 100644 --- a/nuttx/configs/ea3152/ostest/Make.defs +++ b/nuttx/configs/ea3152/ostest/Make.defs @@ -56,7 +56,7 @@ ifeq ($(CONFIG_LPC31_DEVKITARM),y) endif ifeq ($(CONFIG_LPC31_BUILDROOT),y) # NuttX buildroot under Linux or Cygwin - CROSSDEV = arm-elf- + CROSSDEV = arm-nuttx-elf- MAXOPTIMIZATION = -Os endif diff --git a/nuttx/configs/eagle100/README.txt b/nuttx/configs/eagle100/README.txt index e03a92d5c..47c4f89df 100644 --- a/nuttx/configs/eagle100/README.txt +++ b/nuttx/configs/eagle100/README.txt @@ -36,7 +36,7 @@ GNU Toolchain Options make # Will build for the devkitARM toolchain make CROSSDEV=arm-eabi- # Will build for the devkitARM toolchain make CROSSDEV=arm-none-eabi- # Will build for the CodeSourcery toolchain - make CROSSDEV=arm-elf- # Will build for the NuttX buildroot toolchain + make CROSSDEV=arm-nuttx-elf- # Will build for the NuttX buildroot toolchain Of course, hard coding this CROSS_COMPILE value in Make.defs file will save some repetitive typing. diff --git a/nuttx/configs/eagle100/httpd/Make.defs b/nuttx/configs/eagle100/httpd/Make.defs index 1b6dc01cf..8d3cc9c25 100644 --- a/nuttx/configs/eagle100/httpd/Make.defs +++ b/nuttx/configs/eagle100/httpd/Make.defs @@ -40,7 +40,7 @@ include ${TOPDIR}/tools/Config.mk # make -- Will build for the devkitARM toolchain # make CROSSDEV=arm-eabi- -- Will build for the devkitARM toolchain # make CROSSDEV=arm-none-eabi- -- Will build for the CodeSourcery toolchain -# make CROSSDEV=arm-elf- -- Will build for the NuttX buildroot toolchain +# make CROSSDEV=arm-nuttx-elf- -- Will build for the NuttX buildroot toolchain CROSSDEV = arm-eabi- CC = $(CROSSDEV)gcc @@ -55,7 +55,7 @@ OBJDUMP = $(CROSSDEV)objdump ARCHCCVERSION = ${shell $(CC) -v 2>&1 | sed -n '/^gcc version/p' | sed -e 's/^gcc version \([0-9\.]\)/\1/g' -e 's/[-\ ].*//g' -e '1q'} ARCHCCMAJOR = ${shell echo $(ARCHCCVERSION) | cut -d'.' -f1} -ifeq ($(CROSSDEV),arm-elf-) +ifeq ($(CROSSDEV),arm-nuttx-elf-) MKDEP = $(TOPDIR)/tools/mkdeps.sh ARCHCPUFLAGS = -mtune=cortex-m3 -march=armv7-m -mfloat-abi=soft ARCHINCLUDES = -I. -isystem $(TOPDIR)/include @@ -106,7 +106,7 @@ OBJEXT = .o LIBEXT = .a EXEEXT = -ifneq ($(CROSSDEV),arm-elf-) +ifneq ($(CROSSDEV),arm-nuttx-elf-) LDFLAGS += -nostartfiles -nodefaultlibs endif ifeq ($(CONFIG_DEBUG_SYMBOLS),y) diff --git a/nuttx/configs/eagle100/nettest/Make.defs b/nuttx/configs/eagle100/nettest/Make.defs index ef761182f..ca5049282 100644 --- a/nuttx/configs/eagle100/nettest/Make.defs +++ b/nuttx/configs/eagle100/nettest/Make.defs @@ -40,7 +40,7 @@ include ${TOPDIR}/tools/Config.mk # make -- Will build for the devkitARM toolchain # make CROSSDEV=arm-eabi- -- Will build for the devkitARM toolchain # make CROSSDEV=arm-none-eabi- -- Will build for the CodeSourcery toolchain -# make CROSSDEV=arm-elf- -- Will build for the NuttX buildroot toolchain +# make CROSSDEV=arm-nuttx-elf- -- Will build for the NuttX buildroot toolchain CROSSDEV = arm-eabi- CC = $(CROSSDEV)gcc @@ -55,7 +55,7 @@ OBJDUMP = $(CROSSDEV)objdump ARCHCCVERSION = ${shell $(CC) -v 2>&1 | sed -n '/^gcc version/p' | sed -e 's/^gcc version \([0-9\.]\)/\1/g' -e 's/[-\ ].*//g' -e '1q'} ARCHCCMAJOR = ${shell echo $(ARCHCCVERSION) | cut -d'.' -f1} -ifeq ($(CROSSDEV),arm-elf-) +ifeq ($(CROSSDEV),arm-nuttx-elf-) MKDEP = $(TOPDIR)/tools/mkdeps.sh ARCHCPUFLAGS = -mtune=cortex-m3 -march=armv7-m -mfloat-abi=soft ARCHINCLUDES = -I. -isystem $(TOPDIR)/include @@ -106,7 +106,7 @@ OBJEXT = .o LIBEXT = .a EXEEXT = -ifneq ($(CROSSDEV),arm-elf-) +ifneq ($(CROSSDEV),arm-nuttx-elf-) LDFLAGS += -nostartfiles -nodefaultlibs endif ifeq ($(CONFIG_DEBUG_SYMBOLS),y) diff --git a/nuttx/configs/eagle100/nsh/Make.defs b/nuttx/configs/eagle100/nsh/Make.defs index 4f024e263..499299495 100644 --- a/nuttx/configs/eagle100/nsh/Make.defs +++ b/nuttx/configs/eagle100/nsh/Make.defs @@ -40,7 +40,7 @@ include ${TOPDIR}/tools/Config.mk # make -- Will build for the devkitARM toolchain # make CROSSDEV=arm-eabi- -- Will build for the devkitARM toolchain # make CROSSDEV=arm-none-eabi- -- Will build for the CodeSourcery toolchain -# make CROSSDEV=arm-elf- -- Will build for the NuttX buildroot toolchain +# make CROSSDEV=arm-nuttx-elf- -- Will build for the NuttX buildroot toolchain CROSSDEV = arm-eabi- CC = $(CROSSDEV)gcc @@ -55,7 +55,7 @@ OBJDUMP = $(CROSSDEV)objdump ARCHCCVERSION = ${shell $(CC) -v 2>&1 | sed -n '/^gcc version/p' | sed -e 's/^gcc version \([0-9\.]\)/\1/g' -e 's/[-\ ].*//g' -e '1q'} ARCHCCMAJOR = ${shell echo $(ARCHCCVERSION) | cut -d'.' -f1} -ifeq ($(CROSSDEV),arm-elf-) +ifeq ($(CROSSDEV),arm-nuttx-elf-) MKDEP = $(TOPDIR)/tools/mkdeps.sh ARCHCPUFLAGS = -mtune=cortex-m3 -march=armv7-m -mfloat-abi=soft ARCHINCLUDES = -I. -isystem $(TOPDIR)/include @@ -106,7 +106,7 @@ OBJEXT = .o LIBEXT = .a EXEEXT = -ifneq ($(CROSSDEV),arm-elf-) +ifneq ($(CROSSDEV),arm-nuttx-elf-) LDFLAGS += -nostartfiles -nodefaultlibs endif ifeq ($(CONFIG_DEBUG_SYMBOLS),y) diff --git a/nuttx/configs/eagle100/nxflat/Make.defs b/nuttx/configs/eagle100/nxflat/Make.defs index d3107f112..d735c3942 100644 --- a/nuttx/configs/eagle100/nxflat/Make.defs +++ b/nuttx/configs/eagle100/nxflat/Make.defs @@ -40,7 +40,7 @@ include ${TOPDIR}/tools/Config.mk # make -- Will build for the devkitARM toolchain # make CROSSDEV=arm-eabi- -- Will build for the devkitARM toolchain # make CROSSDEV=arm-none-eabi- -- Will build for the CodeSourcery toolchain -# make CROSSDEV=arm-elf- -- Will build for the NuttX buildroot toolchain +# make CROSSDEV=arm-nuttx-elf- -- Will build for the NuttX buildroot toolchain CROSSDEV = arm-eabi- CC = $(CROSSDEV)gcc @@ -58,7 +58,7 @@ LDNXFLAT = ldnxflat ARCHCCVERSION = ${shell $(CC) -v 2>&1 | sed -n '/^gcc version/p' | sed -e 's/^gcc version \([0-9\.]\)/\1/g' -e 's/[-\ ].*//g' -e '1q'} ARCHCCMAJOR = ${shell echo $(ARCHCCVERSION) | cut -d'.' -f1} -ifeq ($(CROSSDEV),arm-elf-) +ifeq ($(CROSSDEV),arm-nuttx-elf-) MKDEP = $(TOPDIR)/tools/mkdeps.sh ARCHCPUFLAGS = -mtune=cortex-m3 -march=armv7-m -mfloat-abi=soft ARCHINCLUDES = -I. -isystem $(TOPDIR)/include @@ -109,7 +109,7 @@ OBJEXT = .o LIBEXT = .a EXEEXT = -ifneq ($(CROSSDEV),arm-elf-) +ifneq ($(CROSSDEV),arm-nuttx-elf-) LDFLAGS += -nostartfiles -nodefaultlibs endif ifeq ($(CONFIG_DEBUG_SYMBOLS),y) diff --git a/nuttx/configs/eagle100/ostest/Make.defs b/nuttx/configs/eagle100/ostest/Make.defs index 7dd98c21a..641fcbaba 100644 --- a/nuttx/configs/eagle100/ostest/Make.defs +++ b/nuttx/configs/eagle100/ostest/Make.defs @@ -40,7 +40,7 @@ include ${TOPDIR}/tools/Config.mk # make -- Will build for the devkitARM toolchain # make CROSSDEV=arm-eabi- -- Will build for the devkitARM toolchain # make CROSSDEV=arm-none-eabi- -- Will build for the CodeSourcery toolchain -# make CROSSDEV=arm-elf- -- Will build for the NuttX buildroot toolchain +# make CROSSDEV=arm-nuttx-elf- -- Will build for the NuttX buildroot toolchain CROSSDEV = arm-eabi- CC = $(CROSSDEV)gcc @@ -55,7 +55,7 @@ OBJDUMP = $(CROSSDEV)objdump ARCHCCVERSION = ${shell $(CC) -v 2>&1 | sed -n '/^gcc version/p' | sed -e 's/^gcc version \([0-9\.]\)/\1/g' -e 's/[-\ ].*//g' -e '1q'} ARCHCCMAJOR = ${shell echo $(ARCHCCVERSION) | cut -d'.' -f1} -ifeq ($(CROSSDEV),arm-elf-) +ifeq ($(CROSSDEV),arm-nuttx-elf-) MKDEP = $(TOPDIR)/tools/mkdeps.sh ARCHCPUFLAGS = -mtune=cortex-m3 -march=armv7-m -mfloat-abi=soft ARCHINCLUDES = -I. -isystem $(TOPDIR)/include @@ -106,7 +106,7 @@ OBJEXT = .o LIBEXT = .a EXEEXT = -ifneq ($(CROSSDEV),arm-elf-) +ifneq ($(CROSSDEV),arm-nuttx-elf-) LDFLAGS += -nostartfiles -nodefaultlibs endif ifeq ($(CONFIG_DEBUG_SYMBOLS),y) diff --git a/nuttx/configs/eagle100/thttpd/Make.defs b/nuttx/configs/eagle100/thttpd/Make.defs index a864867e7..999db3a59 100644 --- a/nuttx/configs/eagle100/thttpd/Make.defs +++ b/nuttx/configs/eagle100/thttpd/Make.defs @@ -40,7 +40,7 @@ include ${TOPDIR}/tools/Config.mk # make -- Will build for the devkitARM toolchain # make CROSSDEV=arm-eabi- -- Will build for the devkitARM toolchain # make CROSSDEV=arm-none-eabi- -- Will build for the CodeSourcery toolchain -# make CROSSDEV=arm-elf- -- Will build for the NuttX buildroot toolchain +# make CROSSDEV=arm-nuttx-elf- -- Will build for the NuttX buildroot toolchain CROSSDEV = arm-eabi- CC = $(CROSSDEV)gcc @@ -58,7 +58,7 @@ LDNXFLAT = ldnxflat ARCHCCVERSION = ${shell $(CC) -v 2>&1 | sed -n '/^gcc version/p' | sed -e 's/^gcc version \([0-9\.]\)/\1/g' -e 's/[-\ ].*//g' -e '1q'} ARCHCCMAJOR = ${shell echo $(ARCHCCVERSION) | cut -d'.' -f1} -ifeq ($(CROSSDEV),arm-elf-) +ifeq ($(CROSSDEV),arm-nuttx-elf-) MKDEP = $(TOPDIR)/tools/mkdeps.sh ARCHCPUFLAGS = -mtune=cortex-m3 -march=armv7-m -mfloat-abi=soft ARCHINCLUDES = -I. -isystem $(TOPDIR)/include @@ -109,7 +109,7 @@ OBJEXT = .o LIBEXT = .a EXEEXT = -ifneq ($(CROSSDEV),arm-elf-) +ifneq ($(CROSSDEV),arm-nuttx-elf-) LDFLAGS += -nostartfiles -nodefaultlibs endif ifeq ($(CONFIG_DEBUG_SYMBOLS),y) diff --git a/nuttx/configs/ekk-lm3s9b96/nsh/Make.defs b/nuttx/configs/ekk-lm3s9b96/nsh/Make.defs index a4223e513..1be7fc8f0 100644 --- a/nuttx/configs/ekk-lm3s9b96/nsh/Make.defs +++ b/nuttx/configs/ekk-lm3s9b96/nsh/Make.defs @@ -59,7 +59,7 @@ ifeq ($(CONFIG_LM3S_DEVKITARM),y) endif ifeq ($(CONFIG_LM3S_BUILDROOT),y) # NuttX buildroot under Linux or Cygwin - CROSSDEV = arm-elf- + CROSSDEV = arm-nuttx-elf- ARCHCPUFLAGS = -mtune=cortex-m3 -march=armv7-m -mfloat-abi=soft MAXOPTIMIZATION = -Os endif @@ -121,7 +121,7 @@ OBJEXT = .o LIBEXT = .a EXEEXT = -ifneq ($(CROSSDEV),arm-elf-) +ifneq ($(CROSSDEV),arm-nuttx-elf-) LDFLAGS += -nostartfiles -nodefaultlibs endif ifeq ($(CONFIG_DEBUG_SYMBOLS),y) diff --git a/nuttx/configs/ekk-lm3s9b96/ostest/Make.defs b/nuttx/configs/ekk-lm3s9b96/ostest/Make.defs index 2da0c421a..e0fae20f0 100644 --- a/nuttx/configs/ekk-lm3s9b96/ostest/Make.defs +++ b/nuttx/configs/ekk-lm3s9b96/ostest/Make.defs @@ -59,7 +59,7 @@ ifeq ($(CONFIG_LM3S_DEVKITARM),y) endif ifeq ($(CONFIG_LM3S_BUILDROOT),y) # NuttX buildroot under Linux or Cygwin - CROSSDEV = arm-elf- + CROSSDEV = arm-nuttx-elf- ARCHCPUFLAGS = -mtune=cortex-m3 -march=armv7-m -mfloat-abi=soft MAXOPTIMIZATION = -Os endif @@ -121,7 +121,7 @@ OBJEXT = .o LIBEXT = .a EXEEXT = -ifneq ($(CROSSDEV),arm-elf-) +ifneq ($(CROSSDEV),arm-nuttx-elf-) LDFLAGS += -nostartfiles -nodefaultlibs endif ifeq ($(CONFIG_DEBUG_SYMBOLS),y) diff --git a/nuttx/configs/fire-stm32v2/nsh/Make.defs b/nuttx/configs/fire-stm32v2/nsh/Make.defs index 567e82063..aaf0e8980 100644 --- a/nuttx/configs/fire-stm32v2/nsh/Make.defs +++ b/nuttx/configs/fire-stm32v2/nsh/Make.defs @@ -82,8 +82,8 @@ ifeq ($(CONFIG_STM32_RAISONANCE),y) endif ifeq ($(CONFIG_STM32_BUILDROOT),y) # NuttX buildroot under Linux or Cygwin - CROSSDEV = arm-elf- - ARCROSSDEV = arm-elf- + CROSSDEV = arm-nuttx-elf- + ARCROSSDEV = arm-nuttx-elf- ARCHCPUFLAGS = -mtune=cortex-m3 -march=armv7-m -mfloat-abi=soft MAXOPTIMIZATION = -Os endif @@ -153,7 +153,7 @@ OBJEXT = .o LIBEXT = .a EXEEXT = -ifneq ($(CROSSDEV),arm-elf-) +ifneq ($(CROSSDEV),arm-nuttx-elf-) LDFLAGS += -nostartfiles -nodefaultlibs endif ifeq ($(CONFIG_DEBUG_SYMBOLS),y) diff --git a/nuttx/configs/hymini-stm32v/buttons/Make.defs b/nuttx/configs/hymini-stm32v/buttons/Make.defs index f78c3aed3..bcc1f6845 100644 --- a/nuttx/configs/hymini-stm32v/buttons/Make.defs +++ b/nuttx/configs/hymini-stm32v/buttons/Make.defs @@ -70,7 +70,7 @@ ifeq ($(CONFIG_STM32_RAISONANCE),y) endif ifeq ($(CONFIG_STM32_BUILDROOT),y) # NuttX buildroot under Linux or Cygwin - CROSSDEV = arm-elf- + CROSSDEV = arm-nuttx-elf- ARCHCPUFLAGS = -mtune=cortex-m3 -march=armv7-m -mfloat-abi=soft MAXOPTIMIZATION = -Os endif @@ -132,7 +132,7 @@ OBJEXT = .o LIBEXT = .a EXEEXT = -ifneq ($(CROSSDEV),arm-elf-) +ifneq ($(CROSSDEV),arm-nuttx-elf-) LDFLAGS += -nostartfiles -nodefaultlibs endif ifeq ($(CONFIG_DEBUG_SYMBOLS),y) diff --git a/nuttx/configs/hymini-stm32v/nsh/Make.defs b/nuttx/configs/hymini-stm32v/nsh/Make.defs index 91aa06383..fae6edc08 100644 --- a/nuttx/configs/hymini-stm32v/nsh/Make.defs +++ b/nuttx/configs/hymini-stm32v/nsh/Make.defs @@ -70,7 +70,7 @@ ifeq ($(CONFIG_STM32_RAISONANCE),y) endif ifeq ($(CONFIG_STM32_BUILDROOT),y) # NuttX buildroot under Linux or Cygwin - CROSSDEV = arm-elf- + CROSSDEV = arm-nuttx-elf- ARCHCPUFLAGS = -mtune=cortex-m3 -march=armv7-m -mfloat-abi=soft MAXOPTIMIZATION = -Os endif @@ -132,7 +132,7 @@ OBJEXT = .o LIBEXT = .a EXEEXT = -ifneq ($(CROSSDEV),arm-elf-) +ifneq ($(CROSSDEV),arm-nuttx-elf-) LDFLAGS += -nostartfiles -nodefaultlibs endif ifeq ($(CONFIG_DEBUG_SYMBOLS),y) diff --git a/nuttx/configs/hymini-stm32v/nsh2/Make.defs b/nuttx/configs/hymini-stm32v/nsh2/Make.defs index f5c9d11c6..1cf89238e 100644 --- a/nuttx/configs/hymini-stm32v/nsh2/Make.defs +++ b/nuttx/configs/hymini-stm32v/nsh2/Make.defs @@ -70,7 +70,7 @@ ifeq ($(CONFIG_STM32_RAISONANCE),y) endif ifeq ($(CONFIG_STM32_BUILDROOT),y) # NuttX buildroot under Linux or Cygwin - CROSSDEV = arm-elf- + CROSSDEV = arm-nuttx-elf- ARCHCPUFLAGS = -mtune=cortex-m3 -march=armv7-m -mfloat-abi=soft MAXOPTIMIZATION = -Os endif @@ -132,7 +132,7 @@ OBJEXT = .o LIBEXT = .a EXEEXT = -ifneq ($(CROSSDEV),arm-elf-) +ifneq ($(CROSSDEV),arm-nuttx-elf-) LDFLAGS += -nostartfiles -nodefaultlibs endif ifeq ($(CONFIG_DEBUG_SYMBOLS),y) diff --git a/nuttx/configs/hymini-stm32v/nx/Make.defs b/nuttx/configs/hymini-stm32v/nx/Make.defs index ac140b354..8ebded094 100644 --- a/nuttx/configs/hymini-stm32v/nx/Make.defs +++ b/nuttx/configs/hymini-stm32v/nx/Make.defs @@ -70,7 +70,7 @@ ifeq ($(CONFIG_STM32_RAISONANCE),y) endif ifeq ($(CONFIG_STM32_BUILDROOT),y) # NuttX buildroot under Linux or Cygwin - CROSSDEV = arm-elf- + CROSSDEV = arm-nuttx-elf- ARCHCPUFLAGS = -mtune=cortex-m3 -march=armv7-m -mfloat-abi=soft MAXOPTIMIZATION = -Os endif @@ -132,7 +132,7 @@ OBJEXT = .o LIBEXT = .a EXEEXT = -ifneq ($(CROSSDEV),arm-elf-) +ifneq ($(CROSSDEV),arm-nuttx-elf-) LDFLAGS += -nostartfiles -nodefaultlibs endif ifeq ($(CONFIG_DEBUG_SYMBOLS),y) diff --git a/nuttx/configs/hymini-stm32v/nxlines/Make.defs b/nuttx/configs/hymini-stm32v/nxlines/Make.defs index 897af1fcd..15521d621 100644 --- a/nuttx/configs/hymini-stm32v/nxlines/Make.defs +++ b/nuttx/configs/hymini-stm32v/nxlines/Make.defs @@ -73,7 +73,7 @@ ifeq ($(CONFIG_STM32_RAISONANCE),y) endif ifeq ($(CONFIG_STM32_BUILDROOT),y) # NuttX buildroot under Linux or Cygwin - CROSSDEV = arm-elf- + CROSSDEV = arm-nuttx-elf- ARCHCPUFLAGS = -mtune=cortex-m3 -march=armv7-m -mfloat-abi=soft MAXOPTIMIZATION = -Os endif @@ -134,7 +134,7 @@ OBJEXT = .o LIBEXT = .a EXEEXT = -ifneq ($(CROSSDEV),arm-elf-) +ifneq ($(CROSSDEV),arm-nuttx-elf-) LDFLAGS += -nostartfiles -nodefaultlibs endif ifeq ($(CONFIG_DEBUG_SYMBOLS),y) diff --git a/nuttx/configs/hymini-stm32v/usbserial/Make.defs b/nuttx/configs/hymini-stm32v/usbserial/Make.defs index 29be9190f..b58c4c1fe 100644 --- a/nuttx/configs/hymini-stm32v/usbserial/Make.defs +++ b/nuttx/configs/hymini-stm32v/usbserial/Make.defs @@ -70,7 +70,7 @@ ifeq ($(CONFIG_STM32_RAISONANCE),y) endif ifeq ($(CONFIG_STM32_BUILDROOT),y) # NuttX buildroot under Linux or Cygwin - CROSSDEV = arm-elf- + CROSSDEV = arm-nuttx-elf- ARCHCPUFLAGS = -mtune=cortex-m3 -march=armv7-m -mfloat-abi=soft MAXOPTIMIZATION = -Os endif @@ -132,7 +132,7 @@ OBJEXT = .o LIBEXT = .a EXEEXT = -ifneq ($(CROSSDEV),arm-elf-) +ifneq ($(CROSSDEV),arm-nuttx-elf-) LDFLAGS += -nostartfiles -nodefaultlibs endif ifeq ($(CONFIG_DEBUG_SYMBOLS),y) diff --git a/nuttx/configs/hymini-stm32v/usbstorage/Make.defs b/nuttx/configs/hymini-stm32v/usbstorage/Make.defs index 3e89daa6d..f3264ab93 100644 --- a/nuttx/configs/hymini-stm32v/usbstorage/Make.defs +++ b/nuttx/configs/hymini-stm32v/usbstorage/Make.defs @@ -70,7 +70,7 @@ ifeq ($(CONFIG_STM32_RAISONANCE),y) endif ifeq ($(CONFIG_STM32_BUILDROOT),y) # NuttX buildroot under Linux or Cygwin - CROSSDEV = arm-elf- + CROSSDEV = arm-nuttx-elf- ARCHCPUFLAGS = -mtune=cortex-m3 -march=armv7-m -mfloat-abi=soft MAXOPTIMIZATION = -Os endif @@ -132,7 +132,7 @@ OBJEXT = .o LIBEXT = .a EXEEXT = -ifneq ($(CROSSDEV),arm-elf-) +ifneq ($(CROSSDEV),arm-nuttx-elf-) LDFLAGS += -nostartfiles -nodefaultlibs endif ifeq ($(CONFIG_DEBUG_SYMBOLS),y) diff --git a/nuttx/configs/kwikstik-k40/ostest/Make.defs b/nuttx/configs/kwikstik-k40/ostest/Make.defs index 0f03b6c19..43a5dd01e 100644 --- a/nuttx/configs/kwikstik-k40/ostest/Make.defs +++ b/nuttx/configs/kwikstik-k40/ostest/Make.defs @@ -58,7 +58,7 @@ ifeq ($(CONFIG_KINETIS_DEVKITARM),y) endif ifeq ($(CONFIG_KINETIS_BUILDROOT),y) # NuttX buildroot under Linux or Cygwin - CROSSDEV = arm-elf- + CROSSDEV = arm-nuttx-elf- ARCHCPUFLAGS = -mtune=cortex-m3 -march=armv7-m -mfloat-abi=soft -mlong-calls MAXOPTIMIZATION = -Os endif @@ -120,7 +120,7 @@ OBJEXT = .o LIBEXT = .a EXEEXT = -ifneq ($(CROSSDEV),arm-elf-) +ifneq ($(CROSSDEV),arm-nuttx-elf-) LDFLAGS += -nostartfiles -nodefaultlibs endif ifeq ($(CONFIG_DEBUG_SYMBOLS),y) diff --git a/nuttx/configs/lincoln60/nsh/Make.defs b/nuttx/configs/lincoln60/nsh/Make.defs index cca519da4..9750a0e87 100644 --- a/nuttx/configs/lincoln60/nsh/Make.defs +++ b/nuttx/configs/lincoln60/nsh/Make.defs @@ -58,7 +58,7 @@ ifeq ($(CONFIG_LPC17_DEVKITARM),y) endif ifeq ($(CONFIG_LPC17_BUILDROOT),y) # NuttX buildroot under Linux or Cygwin - CROSSDEV = arm-elf- + CROSSDEV = arm-nuttx-elf- ARCHCPUFLAGS = -mtune=cortex-m3 -march=armv7-m -mfloat-abi=soft MAXOPTIMIZATION = -Os endif @@ -120,7 +120,7 @@ OBJEXT = .o LIBEXT = .a EXEEXT = -ifneq ($(CROSSDEV),arm-elf-) +ifneq ($(CROSSDEV),arm-nuttx-elf-) LDFLAGS += -nostartfiles -nodefaultlibs endif ifeq ($(CONFIG_DEBUG_SYMBOLS),y) diff --git a/nuttx/configs/lincoln60/ostest/Make.defs b/nuttx/configs/lincoln60/ostest/Make.defs index 29ef7c327..c90939429 100644 --- a/nuttx/configs/lincoln60/ostest/Make.defs +++ b/nuttx/configs/lincoln60/ostest/Make.defs @@ -58,7 +58,7 @@ ifeq ($(CONFIG_LPC17_DEVKITARM),y) endif ifeq ($(CONFIG_LPC17_BUILDROOT),y) # NuttX buildroot under Linux or Cygwin - CROSSDEV = arm-elf- + CROSSDEV = arm-nuttx-elf- ARCHCPUFLAGS = -mtune=cortex-m3 -march=armv7-m -mfloat-abi=soft MAXOPTIMIZATION = -Os endif @@ -120,7 +120,7 @@ OBJEXT = .o LIBEXT = .a EXEEXT = -ifneq ($(CROSSDEV),arm-elf-) +ifneq ($(CROSSDEV),arm-nuttx-elf-) LDFLAGS += -nostartfiles -nodefaultlibs endif ifeq ($(CONFIG_DEBUG_SYMBOLS),y) diff --git a/nuttx/configs/lm3s6432-s2e/nsh/Make.defs b/nuttx/configs/lm3s6432-s2e/nsh/Make.defs index 3bac1a4db..ef39674b2 100644 --- a/nuttx/configs/lm3s6432-s2e/nsh/Make.defs +++ b/nuttx/configs/lm3s6432-s2e/nsh/Make.defs @@ -58,7 +58,7 @@ ifeq ($(CONFIG_LM3S_DEVKITARM),y) endif ifeq ($(CONFIG_LM3S_BUILDROOT),y) # NuttX buildroot under Linux or Cygwin - CROSSDEV = arm-elf- + CROSSDEV = arm-nuttx-elf- ARCHCPUFLAGS = -mtune=cortex-m3 -march=armv7-m -mfloat-abi=soft MAXOPTIMIZATION = -Os endif @@ -120,7 +120,7 @@ OBJEXT = .o LIBEXT = .a EXEEXT = -ifneq ($(CROSSDEV),arm-elf-) +ifneq ($(CROSSDEV),arm-nuttx-elf-) LDFLAGS += -nostartfiles -nodefaultlibs endif ifeq ($(CONFIG_DEBUG_SYMBOLS),y) diff --git a/nuttx/configs/lm3s6432-s2e/ostest/Make.defs b/nuttx/configs/lm3s6432-s2e/ostest/Make.defs index 7d528cdf0..603689183 100644 --- a/nuttx/configs/lm3s6432-s2e/ostest/Make.defs +++ b/nuttx/configs/lm3s6432-s2e/ostest/Make.defs @@ -58,7 +58,7 @@ ifeq ($(CONFIG_LM3S_DEVKITARM),y) endif ifeq ($(CONFIG_LM3S_BUILDROOT),y) # NuttX buildroot under Linux or Cygwin - CROSSDEV = arm-elf- + CROSSDEV = arm-nuttx-elf- ARCHCPUFLAGS = -mtune=cortex-m3 -march=armv7-m -mfloat-abi=soft MAXOPTIMIZATION = -Os endif @@ -120,7 +120,7 @@ OBJEXT = .o LIBEXT = .a EXEEXT = -ifneq ($(CROSSDEV),arm-elf-) +ifneq ($(CROSSDEV),arm-nuttx-elf-) LDFLAGS += -nostartfiles -nodefaultlibs endif ifeq ($(CONFIG_DEBUG_SYMBOLS),y) diff --git a/nuttx/configs/lm3s6965-ek/nsh/Make.defs b/nuttx/configs/lm3s6965-ek/nsh/Make.defs index 52a3c7bd1..17df0ebf7 100644 --- a/nuttx/configs/lm3s6965-ek/nsh/Make.defs +++ b/nuttx/configs/lm3s6965-ek/nsh/Make.defs @@ -58,7 +58,7 @@ ifeq ($(CONFIG_LM3S_DEVKITARM),y) endif ifeq ($(CONFIG_LM3S_BUILDROOT),y) # NuttX buildroot under Linux or Cygwin - CROSSDEV = arm-elf- + CROSSDEV = arm-nuttx-elf- ARCHCPUFLAGS = -mtune=cortex-m3 -march=armv7-m -mfloat-abi=soft MAXOPTIMIZATION = -Os endif @@ -120,7 +120,7 @@ OBJEXT = .o LIBEXT = .a EXEEXT = -ifneq ($(CROSSDEV),arm-elf-) +ifneq ($(CROSSDEV),arm-nuttx-elf-) LDFLAGS += -nostartfiles -nodefaultlibs endif ifeq ($(CONFIG_DEBUG_SYMBOLS),y) diff --git a/nuttx/configs/lm3s6965-ek/nx/Make.defs b/nuttx/configs/lm3s6965-ek/nx/Make.defs index 21b60450f..5ab0cfd26 100644 --- a/nuttx/configs/lm3s6965-ek/nx/Make.defs +++ b/nuttx/configs/lm3s6965-ek/nx/Make.defs @@ -58,7 +58,7 @@ ifeq ($(CONFIG_LM3S_DEVKITARM),y) endif ifeq ($(CONFIG_LM3S_BUILDROOT),y) # NuttX buildroot under Linux or Cygwin - CROSSDEV = arm-elf- + CROSSDEV = arm-nuttx-elf- ARCHCPUFLAGS = -mtune=cortex-m3 -march=armv7-m -mfloat-abi=soft MAXOPTIMIZATION = -Os endif @@ -120,7 +120,7 @@ OBJEXT = .o LIBEXT = .a EXEEXT = -ifneq ($(CROSSDEV),arm-elf-) +ifneq ($(CROSSDEV),arm-nuttx-elf-) LDFLAGS += -nostartfiles -nodefaultlibs endif ifeq ($(CONFIG_DEBUG_SYMBOLS),y) diff --git a/nuttx/configs/lm3s6965-ek/ostest/Make.defs b/nuttx/configs/lm3s6965-ek/ostest/Make.defs index a834a57ef..5e49273a0 100644 --- a/nuttx/configs/lm3s6965-ek/ostest/Make.defs +++ b/nuttx/configs/lm3s6965-ek/ostest/Make.defs @@ -58,7 +58,7 @@ ifeq ($(CONFIG_LM3S_DEVKITARM),y) endif ifeq ($(CONFIG_LM3S_BUILDROOT),y) # NuttX buildroot under Linux or Cygwin - CROSSDEV = arm-elf- + CROSSDEV = arm-nuttx-elf- ARCHCPUFLAGS = -mtune=cortex-m3 -march=armv7-m -mfloat-abi=soft MAXOPTIMIZATION = -Os endif @@ -120,7 +120,7 @@ OBJEXT = .o LIBEXT = .a EXEEXT = -ifneq ($(CROSSDEV),arm-elf-) +ifneq ($(CROSSDEV),arm-nuttx-elf-) LDFLAGS += -nostartfiles -nodefaultlibs endif ifeq ($(CONFIG_DEBUG_SYMBOLS),y) diff --git a/nuttx/configs/lm3s8962-ek/nsh/Make.defs b/nuttx/configs/lm3s8962-ek/nsh/Make.defs index c37875c64..cc7bce1e5 100644 --- a/nuttx/configs/lm3s8962-ek/nsh/Make.defs +++ b/nuttx/configs/lm3s8962-ek/nsh/Make.defs @@ -58,7 +58,7 @@ ifeq ($(CONFIG_LM3S_DEVKITARM),y) endif ifeq ($(CONFIG_LM3S_BUILDROOT),y) # NuttX buildroot under Linux or Cygwin - CROSSDEV = arm-elf- + CROSSDEV = arm-nuttx-elf- ARCHCPUFLAGS = -mtune=cortex-m3 -march=armv7-m -mfloat-abi=soft MAXOPTIMIZATION = -Os endif @@ -120,7 +120,7 @@ OBJEXT = .o LIBEXT = .a EXEEXT = -ifneq ($(CROSSDEV),arm-elf-) +ifneq ($(CROSSDEV),arm-nuttx-elf-) LDFLAGS += -nostartfiles -nodefaultlibs endif ifeq ($(CONFIG_DEBUG_SYMBOLS),y) diff --git a/nuttx/configs/lm3s8962-ek/nx/Make.defs b/nuttx/configs/lm3s8962-ek/nx/Make.defs index be150074c..b97aaa31e 100644 --- a/nuttx/configs/lm3s8962-ek/nx/Make.defs +++ b/nuttx/configs/lm3s8962-ek/nx/Make.defs @@ -58,7 +58,7 @@ ifeq ($(CONFIG_LM3S_DEVKITARM),y) endif ifeq ($(CONFIG_LM3S_BUILDROOT),y) # NuttX buildroot under Linux or Cygwin - CROSSDEV = arm-elf- + CROSSDEV = arm-nuttx-elf- ARCHCPUFLAGS = -mtune=cortex-m3 -march=armv7-m -mfloat-abi=soft MAXOPTIMIZATION = -Os endif @@ -120,7 +120,7 @@ OBJEXT = .o LIBEXT = .a EXEEXT = -ifneq ($(CROSSDEV),arm-elf-) +ifneq ($(CROSSDEV),arm-nuttx-elf-) LDFLAGS += -nostartfiles -nodefaultlibs endif ifeq ($(CONFIG_DEBUG_SYMBOLS),y) diff --git a/nuttx/configs/lm3s8962-ek/ostest/Make.defs b/nuttx/configs/lm3s8962-ek/ostest/Make.defs index 43bcfcddd..4b4863d7c 100644 --- a/nuttx/configs/lm3s8962-ek/ostest/Make.defs +++ b/nuttx/configs/lm3s8962-ek/ostest/Make.defs @@ -58,7 +58,7 @@ ifeq ($(CONFIG_LM3S_DEVKITARM),y) endif ifeq ($(CONFIG_LM3S_BUILDROOT),y) # NuttX buildroot under Linux or Cygwin - CROSSDEV = arm-elf- + CROSSDEV = arm-nuttx-elf- ARCHCPUFLAGS = -mtune=cortex-m3 -march=armv7-m -mfloat-abi=soft MAXOPTIMIZATION = -Os endif @@ -120,7 +120,7 @@ OBJEXT = .o LIBEXT = .a EXEEXT = -ifneq ($(CROSSDEV),arm-elf-) +ifneq ($(CROSSDEV),arm-nuttx-elf-) LDFLAGS += -nostartfiles -nodefaultlibs endif ifeq ($(CONFIG_DEBUG_SYMBOLS),y) diff --git a/nuttx/configs/lpc4330-xplorer/nsh/Make.defs b/nuttx/configs/lpc4330-xplorer/nsh/Make.defs index 341671a97..960fb2a41 100644 --- a/nuttx/configs/lpc4330-xplorer/nsh/Make.defs +++ b/nuttx/configs/lpc4330-xplorer/nsh/Make.defs @@ -93,8 +93,8 @@ ifeq ($(CONFIG_LPC43_DEVKITARM),y) endif ifeq ($(CONFIG_LPC43_BUILDROOT),y) # NuttX buildroot under Linux or Cygwin - CROSSDEV = arm-elf- - ARCROSSDEV = arm-elf- + CROSSDEV = arm-nuttx-elf- + ARCROSSDEV = arm-nuttx-elf- ARCHCPUFLAGS = -mtune=cortex-m4 -march=armv7-m -mfloat-abi=soft MAXOPTIMIZATION = -Os endif @@ -176,7 +176,7 @@ OBJEXT = .o LIBEXT = .a EXEEXT = -ifneq ($(CROSSDEV),arm-elf-) +ifneq ($(CROSSDEV),arm-nuttx-elf-) LDFLAGS += -nostartfiles -nodefaultlibs endif ifeq ($(CONFIG_DEBUG_SYMBOLS),y) diff --git a/nuttx/configs/lpc4330-xplorer/ostest/Make.defs b/nuttx/configs/lpc4330-xplorer/ostest/Make.defs index 341671a97..960fb2a41 100644 --- a/nuttx/configs/lpc4330-xplorer/ostest/Make.defs +++ b/nuttx/configs/lpc4330-xplorer/ostest/Make.defs @@ -93,8 +93,8 @@ ifeq ($(CONFIG_LPC43_DEVKITARM),y) endif ifeq ($(CONFIG_LPC43_BUILDROOT),y) # NuttX buildroot under Linux or Cygwin - CROSSDEV = arm-elf- - ARCROSSDEV = arm-elf- + CROSSDEV = arm-nuttx-elf- + ARCROSSDEV = arm-nuttx-elf- ARCHCPUFLAGS = -mtune=cortex-m4 -march=armv7-m -mfloat-abi=soft MAXOPTIMIZATION = -Os endif @@ -176,7 +176,7 @@ OBJEXT = .o LIBEXT = .a EXEEXT = -ifneq ($(CROSSDEV),arm-elf-) +ifneq ($(CROSSDEV),arm-nuttx-elf-) LDFLAGS += -nostartfiles -nodefaultlibs endif ifeq ($(CONFIG_DEBUG_SYMBOLS),y) diff --git a/nuttx/configs/lpcxpresso-lpc1768/dhcpd/Make.defs b/nuttx/configs/lpcxpresso-lpc1768/dhcpd/Make.defs index 8ece92ca9..804e20ecd 100644 --- a/nuttx/configs/lpcxpresso-lpc1768/dhcpd/Make.defs +++ b/nuttx/configs/lpcxpresso-lpc1768/dhcpd/Make.defs @@ -58,7 +58,7 @@ ifeq ($(CONFIG_LPC17_DEVKITARM),y) endif ifeq ($(CONFIG_LPC17_BUILDROOT),y) # NuttX buildroot under Linux or Cygwin - CROSSDEV = arm-elf- + CROSSDEV = arm-nuttx-elf- ARCHCPUFLAGS = -mtune=cortex-m3 -march=armv7-m -mfloat-abi=soft MAXOPTIMIZATION = -Os endif @@ -132,7 +132,7 @@ OBJEXT = .o LIBEXT = .a EXEEXT = -ifneq ($(CROSSDEV),arm-elf-) +ifneq ($(CROSSDEV),arm-nuttx-elf-) LDFLAGS += -nostartfiles -nodefaultlibs endif ifeq ($(CONFIG_DEBUG_SYMBOLS),y) diff --git a/nuttx/configs/lpcxpresso-lpc1768/nsh/Make.defs b/nuttx/configs/lpcxpresso-lpc1768/nsh/Make.defs index 21d84b494..8c6ad9ab8 100644 --- a/nuttx/configs/lpcxpresso-lpc1768/nsh/Make.defs +++ b/nuttx/configs/lpcxpresso-lpc1768/nsh/Make.defs @@ -58,7 +58,7 @@ ifeq ($(CONFIG_LPC17_DEVKITARM),y) endif ifeq ($(CONFIG_LPC17_BUILDROOT),y) # NuttX buildroot under Linux or Cygwin - CROSSDEV = arm-elf- + CROSSDEV = arm-nuttx-elf- ARCHCPUFLAGS = -mtune=cortex-m3 -march=armv7-m -mfloat-abi=soft MAXOPTIMIZATION = -Os endif @@ -132,7 +132,7 @@ OBJEXT = .o LIBEXT = .a EXEEXT = -ifneq ($(CROSSDEV),arm-elf-) +ifneq ($(CROSSDEV),arm-nuttx-elf-) LDFLAGS += -nostartfiles -nodefaultlibs endif ifeq ($(CONFIG_DEBUG_SYMBOLS),y) diff --git a/nuttx/configs/lpcxpresso-lpc1768/nx/Make.defs b/nuttx/configs/lpcxpresso-lpc1768/nx/Make.defs index 9a7d19069..a535fd03d 100644 --- a/nuttx/configs/lpcxpresso-lpc1768/nx/Make.defs +++ b/nuttx/configs/lpcxpresso-lpc1768/nx/Make.defs @@ -58,7 +58,7 @@ ifeq ($(CONFIG_LPC17_DEVKITARM),y) endif ifeq ($(CONFIG_LPC17_BUILDROOT),y) # NuttX buildroot under Linux or Cygwin - CROSSDEV = arm-elf- + CROSSDEV = arm-nuttx-elf- ARCHCPUFLAGS = -mtune=cortex-m3 -march=armv7-m -mfloat-abi=soft MAXOPTIMIZATION = -Os endif @@ -132,7 +132,7 @@ OBJEXT = .o LIBEXT = .a EXEEXT = -ifneq ($(CROSSDEV),arm-elf-) +ifneq ($(CROSSDEV),arm-nuttx-elf-) LDFLAGS += -nostartfiles -nodefaultlibs endif ifeq ($(CONFIG_DEBUG_SYMBOLS),y) diff --git a/nuttx/configs/lpcxpresso-lpc1768/ostest/Make.defs b/nuttx/configs/lpcxpresso-lpc1768/ostest/Make.defs index 1dd92adb7..1b38f2d6b 100644 --- a/nuttx/configs/lpcxpresso-lpc1768/ostest/Make.defs +++ b/nuttx/configs/lpcxpresso-lpc1768/ostest/Make.defs @@ -58,7 +58,7 @@ ifeq ($(CONFIG_LPC17_DEVKITARM),y) endif ifeq ($(CONFIG_LPC17_BUILDROOT),y) # NuttX buildroot under Linux or Cygwin - CROSSDEV = arm-elf- + CROSSDEV = arm-nuttx-elf- ARCHCPUFLAGS = -mtune=cortex-m3 -march=armv7-m -mfloat-abi=soft MAXOPTIMIZATION = -Os endif @@ -132,7 +132,7 @@ OBJEXT = .o LIBEXT = .a EXEEXT = -ifneq ($(CROSSDEV),arm-elf-) +ifneq ($(CROSSDEV),arm-nuttx-elf-) LDFLAGS += -nostartfiles -nodefaultlibs endif ifeq ($(CONFIG_DEBUG_SYMBOLS),y) diff --git a/nuttx/configs/lpcxpresso-lpc1768/thttpd/Make.defs b/nuttx/configs/lpcxpresso-lpc1768/thttpd/Make.defs index fc40cce07..810d6d7da 100644 --- a/nuttx/configs/lpcxpresso-lpc1768/thttpd/Make.defs +++ b/nuttx/configs/lpcxpresso-lpc1768/thttpd/Make.defs @@ -58,7 +58,7 @@ ifeq ($(CONFIG_LPC17_DEVKITARM),y) endif ifeq ($(CONFIG_LPC17_BUILDROOT),y) # NuttX buildroot under Linux or Cygwin - CROSSDEV = arm-elf- + CROSSDEV = arm-nuttx-elf- ARCHCPUFLAGS = -mtune=cortex-m3 -march=armv7-m -mfloat-abi=soft MAXOPTIMIZATION = -Os endif @@ -137,7 +137,7 @@ OBJEXT = .o LIBEXT = .a EXEEXT = -ifneq ($(CROSSDEV),arm-elf-) +ifneq ($(CROSSDEV),arm-nuttx-elf-) LDFLAGS += -nostartfiles -nodefaultlibs endif ifeq ($(CONFIG_DEBUG_SYMBOLS),y) diff --git a/nuttx/configs/lpcxpresso-lpc1768/usbstorage/Make.defs b/nuttx/configs/lpcxpresso-lpc1768/usbstorage/Make.defs index d63e11efe..5342dde5b 100644 --- a/nuttx/configs/lpcxpresso-lpc1768/usbstorage/Make.defs +++ b/nuttx/configs/lpcxpresso-lpc1768/usbstorage/Make.defs @@ -58,7 +58,7 @@ ifeq ($(CONFIG_LPC17_DEVKITARM),y) endif ifeq ($(CONFIG_LPC17_BUILDROOT),y) # NuttX buildroot under Linux or Cygwin - CROSSDEV = arm-elf- + CROSSDEV = arm-nuttx-elf- ARCHCPUFLAGS = -mtune=cortex-m3 -march=armv7-m -mfloat-abi=soft MAXOPTIMIZATION = -Os endif @@ -132,7 +132,7 @@ OBJEXT = .o LIBEXT = .a EXEEXT = -ifneq ($(CROSSDEV),arm-elf-) +ifneq ($(CROSSDEV),arm-nuttx-elf-) LDFLAGS += -nostartfiles -nodefaultlibs endif ifeq ($(CONFIG_DEBUG_SYMBOLS),y) diff --git a/nuttx/configs/m68332evb/Make.defs b/nuttx/configs/m68332evb/Make.defs index fdae944f0..fb85cf827 100644 --- a/nuttx/configs/m68332evb/Make.defs +++ b/nuttx/configs/m68332evb/Make.defs @@ -50,7 +50,7 @@ ARCHDEFINES = ARCHINCLUDES = -I. -isystem $(TOPDIR)/include ARCHSCRIPT = -T$(TOPDIR)/configs/$(CONFIG_ARCH_BOARD)/ld.script -CROSSDEV = m68k-elf- +CROSSDEV = m68k-nuttx-elf- CC = $(CROSSDEV)gcc CPP = $(CROSSDEV)gcc -E LD = $(CROSSDEV)ld diff --git a/nuttx/configs/m68332evb/doc/m68k-defconfig b/nuttx/configs/m68332evb/doc/m68k-defconfig index cbe3c11cd..60f2e4cbd 100644 --- a/nuttx/configs/m68332evb/doc/m68k-defconfig +++ b/nuttx/configs/m68332evb/doc/m68k-defconfig @@ -34,7 +34,7 @@ BR2_STAGING_DIR="$(BUILD_DIR)/staging_dir" BR2_NUTTX_DIR="$(TOPDIR)/../nuttx" BR2_TOPDIR_PREFIX="" BR2_TOPDIR_SUFFIX="" -BR2_GNU_BUILD_SUFFIX="m68k-elf" +BR2_GNU_BUILD_SUFFIX="m68k-nuttx-elf" BR2_GNU_TARGET_SUFFIX="elf" # BR2_PREFER_IMA is not set # BR2_DEPRECATED is not set diff --git a/nuttx/configs/mbed/hidkbd/Make.defs b/nuttx/configs/mbed/hidkbd/Make.defs index f033c685e..262571e45 100644 --- a/nuttx/configs/mbed/hidkbd/Make.defs +++ b/nuttx/configs/mbed/hidkbd/Make.defs @@ -58,7 +58,7 @@ ifeq ($(CONFIG_LPC17_DEVKITARM),y) endif ifeq ($(CONFIG_LPC17_BUILDROOT),y) # NuttX buildroot under Linux or Cygwin - CROSSDEV = arm-elf- + CROSSDEV = arm-nuttx-elf- ARCHCPUFLAGS = -mtune=cortex-m3 -march=armv7-m -mfloat-abi=soft MAXOPTIMIZATION = -Os endif @@ -120,7 +120,7 @@ OBJEXT = .o LIBEXT = .a EXEEXT = -ifneq ($(CROSSDEV),arm-elf-) +ifneq ($(CROSSDEV),arm-nuttx-elf-) LDFLAGS += -nostartfiles -nodefaultlibs endif ifeq ($(CONFIG_DEBUG_SYMBOLS),y) diff --git a/nuttx/configs/mbed/nsh/Make.defs b/nuttx/configs/mbed/nsh/Make.defs index 468952aa2..40c4c94f3 100644 --- a/nuttx/configs/mbed/nsh/Make.defs +++ b/nuttx/configs/mbed/nsh/Make.defs @@ -58,7 +58,7 @@ ifeq ($(CONFIG_LPC17_DEVKITARM),y) endif ifeq ($(CONFIG_LPC17_BUILDROOT),y) # NuttX buildroot under Linux or Cygwin - CROSSDEV = arm-elf- + CROSSDEV = arm-nuttx-elf- ARCHCPUFLAGS = -mtune=cortex-m3 -march=armv7-m -mfloat-abi=soft MAXOPTIMIZATION = -Os endif @@ -120,7 +120,7 @@ OBJEXT = .o LIBEXT = .a EXEEXT = -ifneq ($(CROSSDEV),arm-elf-) +ifneq ($(CROSSDEV),arm-nuttx-elf-) LDFLAGS += -nostartfiles -nodefaultlibs endif ifeq ($(CONFIG_DEBUG_SYMBOLS),y) diff --git a/nuttx/configs/mcu123-lpc214x/README.txt b/nuttx/configs/mcu123-lpc214x/README.txt index 8236798cc..b819abf36 100644 --- a/nuttx/configs/mcu123-lpc214x/README.txt +++ b/nuttx/configs/mcu123-lpc214x/README.txt @@ -42,7 +42,7 @@ GNU Toolchain Options make # Will build for the NuttX buildroot toolchain make CROSSDEV=arm-eabi- # Will build for the devkitARM toolchain make CROSSDEV=arm-none-eabi- # Will build for the CodeSourcery toolchain - make CROSSDEV=arm-elf- # Will build for the NuttX buildroot toolchain + make CROSSDEV=arm-nuttx-elf- # Will build for the NuttX buildroot toolchain Of course, hard coding this CROSS_COMPILE value in Make.defs file will save some repetitive typing. diff --git a/nuttx/configs/mcu123-lpc214x/composite/Make.defs b/nuttx/configs/mcu123-lpc214x/composite/Make.defs index 0173a21c6..f2f0ee8e8 100644 --- a/nuttx/configs/mcu123-lpc214x/composite/Make.defs +++ b/nuttx/configs/mcu123-lpc214x/composite/Make.defs @@ -40,7 +40,7 @@ include ${TOPDIR}/tools/Config.mk # make -- Will build for the CodeSourcery toolchain # make CROSSDEV=arm-eabi- -- Will build for the devkitARM toolchain # make CROSSDEV=arm-none-eabi- -- Will build for the CodeSourcery toolchain -# make CROSSDEV=arm-elf- -- Will build for the NuttX buildroot toolchain +# make CROSSDEV=arm-nuttx-elf- -- Will build for the NuttX buildroot toolchain CROSSDEV = arm-none-eabi- CC = $(CROSSDEV)gcc @@ -63,7 +63,7 @@ OBJCOPYARGS = -R .note -R .note.gnu.build-id -R .comment endif endif -ifeq ($(CROSSDEV),arm-elf-) +ifeq ($(CROSSDEV),arm-nuttx-elf-) MKDEP = $(TOPDIR)/tools/mkdeps.sh ARCHINCLUDES = -I. -isystem $(TOPDIR)/include ARCHXXINCLUDES = -I. -isystem $(TOPDIR)/include -isystem $(TOPDIR)/include/cxx @@ -118,7 +118,7 @@ OBJEXT = .o LIBEXT = .a EXEEXT = -ifneq ($(CROSSDEV),arm-elf-) +ifneq ($(CROSSDEV),arm-nuttx-elf-) LDFLAGS += -nostartfiles -nodefaultlibs endif ifeq ($(CONFIG_DEBUG_SYMBOLS),y) diff --git a/nuttx/configs/mcu123-lpc214x/nsh/Make.defs b/nuttx/configs/mcu123-lpc214x/nsh/Make.defs index daa7a3466..de09916e5 100644 --- a/nuttx/configs/mcu123-lpc214x/nsh/Make.defs +++ b/nuttx/configs/mcu123-lpc214x/nsh/Make.defs @@ -40,9 +40,9 @@ include ${TOPDIR}/tools/Config.mk # make -- Will build for the NuttX buildroot toolchain # make CROSSDEV=arm-eabi- -- Will build for the devkitARM toolchain # make CROSSDEV=arm-none-eabi- -- Will build for the CodeSourcery toolchain -# make CROSSDEV=arm-elf- -- Will build for the NuttX buildroot toolchain +# make CROSSDEV=arm-nuttx-elf- -- Will build for the NuttX buildroot toolchain -CROSSDEV = arm-elf- +CROSSDEV = arm-nuttx-elf- CC = $(CROSSDEV)gcc CXX = $(CROSSDEV)g++ CPP = $(CROSSDEV)gcc -E @@ -63,7 +63,7 @@ OBJCOPYARGS = -R .note -R .note.gnu.build-id -R .comment endif endif -ifeq ($(CROSSDEV),arm-elf-) +ifeq ($(CROSSDEV),arm-nuttx-elf-) MKDEP = $(TOPDIR)/tools/mkdeps.sh ARCHINCLUDES = -I. -isystem $(TOPDIR)/include ARCHXXINCLUDES = -I. -isystem $(TOPDIR)/include -isystem $(TOPDIR)/include/cxx @@ -118,7 +118,7 @@ OBJEXT = .o LIBEXT = .a EXEEXT = -ifneq ($(CROSSDEV),arm-elf-) +ifneq ($(CROSSDEV),arm-nuttx-elf-) LDFLAGS += -nostartfiles -nodefaultlibs endif ifeq ($(CONFIG_DEBUG_SYMBOLS),y) diff --git a/nuttx/configs/mcu123-lpc214x/ostest/Make.defs b/nuttx/configs/mcu123-lpc214x/ostest/Make.defs index d807c7bbd..bc72ca9bd 100644 --- a/nuttx/configs/mcu123-lpc214x/ostest/Make.defs +++ b/nuttx/configs/mcu123-lpc214x/ostest/Make.defs @@ -40,9 +40,9 @@ include ${TOPDIR}/tools/Config.mk # make -- Will build for the NuttX buildroot toolchain # make CROSSDEV=arm-eabi- -- Will build for the devkitARM toolchain # make CROSSDEV=arm-none-eabi- -- Will build for the CodeSourcery toolchain -# make CROSSDEV=arm-elf- -- Will build for the NuttX buildroot toolchain +# make CROSSDEV=arm-nuttx-elf- -- Will build for the NuttX buildroot toolchain -CROSSDEV = arm-elf- +CROSSDEV = arm-nuttx-elf- CC = $(CROSSDEV)gcc CXX = $(CROSSDEV)g++ CPP = $(CROSSDEV)gcc -E @@ -63,7 +63,7 @@ OBJCOPYARGS = -R .note -R .note.gnu.build-id -R .comment endif endif -ifeq ($(CROSSDEV),arm-elf-) +ifeq ($(CROSSDEV),arm-nuttx-elf-) MKDEP = $(TOPDIR)/tools/mkdeps.sh ARCHINCLUDES = -I. -isystem $(TOPDIR)/include ARCHXXINCLUDES = -I. -isystem $(TOPDIR)/include -isystem $(TOPDIR)/include/cxx @@ -118,7 +118,7 @@ OBJEXT = .o LIBEXT = .a EXEEXT = -ifneq ($(CROSSDEV),arm-elf-) +ifneq ($(CROSSDEV),arm-nuttx-elf-) LDFLAGS += -nostartfiles -nodefaultlibs endif ifeq ($(CONFIG_DEBUG_SYMBOLS),y) diff --git a/nuttx/configs/mcu123-lpc214x/usbserial/Make.defs b/nuttx/configs/mcu123-lpc214x/usbserial/Make.defs index 22edf3bab..106224ef1 100644 --- a/nuttx/configs/mcu123-lpc214x/usbserial/Make.defs +++ b/nuttx/configs/mcu123-lpc214x/usbserial/Make.defs @@ -40,9 +40,9 @@ include ${TOPDIR}/tools/Config.mk # make -- Will build for the NuttX buildroot toolchain # make CROSSDEV=arm-eabi- -- Will build for the devkitARM toolchain # make CROSSDEV=arm-none-eabi- -- Will build for the CodeSourcery toolchain -# make CROSSDEV=arm-elf- -- Will build for the NuttX buildroot toolchain +# make CROSSDEV=arm-nuttx-elf- -- Will build for the NuttX buildroot toolchain -CROSSDEV = arm-elf- +CROSSDEV = arm-nuttx-elf- CC = $(CROSSDEV)gcc CXX = $(CROSSDEV)g++ CPP = $(CROSSDEV)gcc -E @@ -63,7 +63,7 @@ OBJCOPYARGS = -R .note -R .note.gnu.build-id -R .comment endif endif -ifeq ($(CROSSDEV),arm-elf-) +ifeq ($(CROSSDEV),arm-nuttx-elf-) MKDEP = $(TOPDIR)/tools/mkdeps.sh ARCHINCLUDES = -I. -isystem $(TOPDIR)/include ARCHXXINCLUDES = -I. -isystem $(TOPDIR)/include -isystem $(TOPDIR)/include/cxx @@ -118,7 +118,7 @@ OBJEXT = .o LIBEXT = .a EXEEXT = -ifneq ($(CROSSDEV),arm-elf-) +ifneq ($(CROSSDEV),arm-nuttx-elf-) LDFLAGS += -nostartfiles -nodefaultlibs endif ifeq ($(CONFIG_DEBUG_SYMBOLS),y) diff --git a/nuttx/configs/mcu123-lpc214x/usbstorage/Make.defs b/nuttx/configs/mcu123-lpc214x/usbstorage/Make.defs index 732a6733b..bf1b9cab4 100644 --- a/nuttx/configs/mcu123-lpc214x/usbstorage/Make.defs +++ b/nuttx/configs/mcu123-lpc214x/usbstorage/Make.defs @@ -40,9 +40,9 @@ include ${TOPDIR}/tools/Config.mk # make -- Will build for the NuttX buildroot toolchain # make CROSSDEV=arm-eabi- -- Will build for the devkitARM toolchain # make CROSSDEV=arm-none-eabi- -- Will build for the CodeSourcery toolchain -# make CROSSDEV=arm-elf- -- Will build for the NuttX buildroot toolchain +# make CROSSDEV=arm-nuttx-elf- -- Will build for the NuttX buildroot toolchain -CROSSDEV = arm-elf- +CROSSDEV = arm-nuttx-elf- CC = $(CROSSDEV)gcc CXX = $(CROSSDEV)g++ CPP = $(CROSSDEV)gcc -E @@ -63,7 +63,7 @@ OBJCOPYARGS = -R .note -R .note.gnu.build-id -R .comment endif endif -ifeq ($(CROSSDEV),arm-elf-) +ifeq ($(CROSSDEV),arm-nuttx-elf-) MKDEP = $(TOPDIR)/tools/mkdeps.sh ARCHINCLUDES = -I. -isystem $(TOPDIR)/include ARCHXXINCLUDES = -I. -isystem $(TOPDIR)/include -isystem $(TOPDIR)/include/cxx @@ -118,7 +118,7 @@ OBJEXT = .o LIBEXT = .a EXEEXT = -ifneq ($(CROSSDEV),arm-elf-) +ifneq ($(CROSSDEV),arm-nuttx-elf-) LDFLAGS += -nostartfiles -nodefaultlibs endif ifeq ($(CONFIG_DEBUG_SYMBOLS),y) diff --git a/nuttx/configs/micropendous3/README.txt b/nuttx/configs/micropendous3/README.txt index e7b2041aa..c05f1ddd5 100644 --- a/nuttx/configs/micropendous3/README.txt +++ b/nuttx/configs/micropendous3/README.txt @@ -523,7 +523,7 @@ Where <subdir> is one of the following: FLASH/SRAM Requirements (as of 6/16/2011): - $ avr-elf-size nuttx + $ avr-nuttx-elf-size nuttx text data bss dec hex filename 24816 978 308 26102 65f6 nuttx diff --git a/nuttx/configs/micropendous3/hello/Make.defs b/nuttx/configs/micropendous3/hello/Make.defs index 058f16690..178f35556 100644 --- a/nuttx/configs/micropendous3/hello/Make.defs +++ b/nuttx/configs/micropendous3/hello/Make.defs @@ -57,7 +57,7 @@ endif ifeq ($(CONFIG_AVR_BUILDROOT),y) # NuttX buildroot GCC toolchain under Linux or Cygwin - CROSSDEV = avr-elf- + CROSSDEV = avr-nuttx-elf- MAXOPTIMIZATION = -O2 ARCHCPUFLAGS = -mmcu=at90usb647 LDFLAGS += -nostartfiles -nodefaultlibs diff --git a/nuttx/configs/mx1ads/ostest/Make.defs b/nuttx/configs/mx1ads/ostest/Make.defs index c80af5c62..71e053b0a 100644 --- a/nuttx/configs/mx1ads/ostest/Make.defs +++ b/nuttx/configs/mx1ads/ostest/Make.defs @@ -36,7 +36,7 @@ include ${TOPDIR}/.config include ${TOPDIR}/tools/Config.mk -CROSSDEV = arm-elf- +CROSSDEV = arm-nuttx-elf- CC = $(CROSSDEV)gcc CXX = $(CROSSDEV)g++ CPP = $(CROSSDEV)gcc -E diff --git a/nuttx/configs/ne64badge/ostest/Make.defs b/nuttx/configs/ne64badge/ostest/Make.defs index 4dc164d15..9521a0a66 100644 --- a/nuttx/configs/ne64badge/ostest/Make.defs +++ b/nuttx/configs/ne64badge/ostest/Make.defs @@ -39,7 +39,7 @@ include ${TOPDIR}/tools/Config.mk # Setup for the selected toolchain # NuttX buildroot under Linux or Cygwin -CROSSDEV = m9s12x-elf- +CROSSDEV = m9s12x-nuttx-elf- MAXOPTIMIZATION = -Os WINTOOL = n diff --git a/nuttx/configs/ntosd-dm320/nettest/Make.defs b/nuttx/configs/ntosd-dm320/nettest/Make.defs index b3d49bc73..30d369c2a 100644 --- a/nuttx/configs/ntosd-dm320/nettest/Make.defs +++ b/nuttx/configs/ntosd-dm320/nettest/Make.defs @@ -56,7 +56,7 @@ ifeq ($(CONFIG_DM320_DEVKITARM),y) endif ifeq ($(CONFIG_DM320_BUILDROOT),y) # NuttX buildroot under Linux or Cygwin - CROSSDEV = arm-elf- + CROSSDEV = arm-nuttx-elf- MAXOPTIMIZATION = -Os endif diff --git a/nuttx/configs/ntosd-dm320/nsh/Make.defs b/nuttx/configs/ntosd-dm320/nsh/Make.defs index 6a590a442..14038f756 100644 --- a/nuttx/configs/ntosd-dm320/nsh/Make.defs +++ b/nuttx/configs/ntosd-dm320/nsh/Make.defs @@ -56,7 +56,7 @@ ifeq ($(CONFIG_DM320_DEVKITARM),y) endif ifeq ($(CONFIG_DM320_BUILDROOT),y) # NuttX buildroot under Linux or Cygwin - CROSSDEV = arm-elf- + CROSSDEV = arm-nuttx-elf- MAXOPTIMIZATION = -Os endif diff --git a/nuttx/configs/ntosd-dm320/ostest/Make.defs b/nuttx/configs/ntosd-dm320/ostest/Make.defs index dda36c8fe..4618c4246 100644 --- a/nuttx/configs/ntosd-dm320/ostest/Make.defs +++ b/nuttx/configs/ntosd-dm320/ostest/Make.defs @@ -56,7 +56,7 @@ ifeq ($(CONFIG_DM320_DEVKITARM),y) endif ifeq ($(CONFIG_DM320_BUILDROOT),y) # NuttX buildroot under Linux or Cygwin - CROSSDEV = arm-elf- + CROSSDEV = arm-nuttx-elf- MAXOPTIMIZATION = -Os endif diff --git a/nuttx/configs/ntosd-dm320/poll/Make.defs b/nuttx/configs/ntosd-dm320/poll/Make.defs index a3abff2ef..c06139bd6 100644 --- a/nuttx/configs/ntosd-dm320/poll/Make.defs +++ b/nuttx/configs/ntosd-dm320/poll/Make.defs @@ -56,7 +56,7 @@ ifeq ($(CONFIG_DM320_DEVKITARM),y) endif ifeq ($(CONFIG_DM320_BUILDROOT),y) # NuttX buildroot under Linux or Cygwin - CROSSDEV = arm-elf- + CROSSDEV = arm-nuttx-elf- MAXOPTIMIZATION = -Os endif diff --git a/nuttx/configs/ntosd-dm320/thttpd/Make.defs b/nuttx/configs/ntosd-dm320/thttpd/Make.defs index 40ecf053f..075f72eaa 100644 --- a/nuttx/configs/ntosd-dm320/thttpd/Make.defs +++ b/nuttx/configs/ntosd-dm320/thttpd/Make.defs @@ -56,7 +56,7 @@ ifeq ($(CONFIG_DM320_DEVKITARM),y) endif ifeq ($(CONFIG_DM320_BUILDROOT),y) # NuttX buildroot under Linux or Cygwin - CROSSDEV = arm-elf- + CROSSDEV = arm-nuttx-elf- MAXOPTIMIZATION = -Os endif diff --git a/nuttx/configs/ntosd-dm320/udp/Make.defs b/nuttx/configs/ntosd-dm320/udp/Make.defs index 6122aeb11..66750f13d 100644 --- a/nuttx/configs/ntosd-dm320/udp/Make.defs +++ b/nuttx/configs/ntosd-dm320/udp/Make.defs @@ -56,7 +56,7 @@ ifeq ($(CONFIG_DM320_DEVKITARM),y) endif ifeq ($(CONFIG_DM320_BUILDROOT),y) # NuttX buildroot under Linux or Cygwin - CROSSDEV = arm-elf- + CROSSDEV = arm-nuttx-elf- MAXOPTIMIZATION = -Os endif diff --git a/nuttx/configs/ntosd-dm320/uip/Make.defs b/nuttx/configs/ntosd-dm320/uip/Make.defs index 758924a15..d59b96e7c 100644 --- a/nuttx/configs/ntosd-dm320/uip/Make.defs +++ b/nuttx/configs/ntosd-dm320/uip/Make.defs @@ -56,7 +56,7 @@ ifeq ($(CONFIG_DM320_DEVKITARM),y) endif ifeq ($(CONFIG_DM320_BUILDROOT),y) # NuttX buildroot under Linux or Cygwin - CROSSDEV = arm-elf- + CROSSDEV = arm-nuttx-elf- MAXOPTIMIZATION = -Os endif diff --git a/nuttx/configs/nucleus2g/nsh/Make.defs b/nuttx/configs/nucleus2g/nsh/Make.defs index 65ec1c8f0..3b8f857a6 100644 --- a/nuttx/configs/nucleus2g/nsh/Make.defs +++ b/nuttx/configs/nucleus2g/nsh/Make.defs @@ -58,7 +58,7 @@ ifeq ($(CONFIG_LPC17_DEVKITARM),y) endif ifeq ($(CONFIG_LPC17_BUILDROOT),y) # NuttX buildroot under Linux or Cygwin - CROSSDEV = arm-elf- + CROSSDEV = arm-nuttx-elf- ARCHCPUFLAGS = -mtune=cortex-m3 -march=armv7-m -mfloat-abi=soft MAXOPTIMIZATION = -Os endif @@ -120,7 +120,7 @@ OBJEXT = .o LIBEXT = .a EXEEXT = -ifneq ($(CROSSDEV),arm-elf-) +ifneq ($(CROSSDEV),arm-nuttx-elf-) LDFLAGS += -nostartfiles -nodefaultlibs endif ifeq ($(CONFIG_DEBUG_SYMBOLS),y) diff --git a/nuttx/configs/nucleus2g/ostest/Make.defs b/nuttx/configs/nucleus2g/ostest/Make.defs index 413f40178..aa0e6f864 100644 --- a/nuttx/configs/nucleus2g/ostest/Make.defs +++ b/nuttx/configs/nucleus2g/ostest/Make.defs @@ -58,7 +58,7 @@ ifeq ($(CONFIG_LPC17_DEVKITARM),y) endif ifeq ($(CONFIG_LPC17_BUILDROOT),y) # NuttX buildroot under Linux or Cygwin - CROSSDEV = arm-elf- + CROSSDEV = arm-nuttx-elf- ARCHCPUFLAGS = -mtune=cortex-m3 -march=armv7-m -mfloat-abi=soft MAXOPTIMIZATION = -Os endif @@ -120,7 +120,7 @@ OBJEXT = .o LIBEXT = .a EXEEXT = -ifneq ($(CROSSDEV),arm-elf-) +ifneq ($(CROSSDEV),arm-nuttx-elf-) LDFLAGS += -nostartfiles -nodefaultlibs endif ifeq ($(CONFIG_DEBUG_SYMBOLS),y) diff --git a/nuttx/configs/nucleus2g/usbserial/Make.defs b/nuttx/configs/nucleus2g/usbserial/Make.defs index 5e473323e..483fd5260 100644 --- a/nuttx/configs/nucleus2g/usbserial/Make.defs +++ b/nuttx/configs/nucleus2g/usbserial/Make.defs @@ -58,7 +58,7 @@ ifeq ($(CONFIG_LPC17_DEVKITARM),y) endif ifeq ($(CONFIG_LPC17_BUILDROOT),y) # NuttX buildroot under Linux or Cygwin - CROSSDEV = arm-elf- + CROSSDEV = arm-nuttx-elf- ARCHCPUFLAGS = -mtune=cortex-m3 -march=armv7-m -mfloat-abi=soft MAXOPTIMIZATION = -Os endif @@ -120,7 +120,7 @@ OBJEXT = .o LIBEXT = .a EXEEXT = -ifneq ($(CROSSDEV),arm-elf-) +ifneq ($(CROSSDEV),arm-nuttx-elf-) LDFLAGS += -nostartfiles -nodefaultlibs endif ifeq ($(CONFIG_DEBUG_SYMBOLS),y) diff --git a/nuttx/configs/nucleus2g/usbstorage/Make.defs b/nuttx/configs/nucleus2g/usbstorage/Make.defs index 35487f85b..7a9c1fa6b 100644 --- a/nuttx/configs/nucleus2g/usbstorage/Make.defs +++ b/nuttx/configs/nucleus2g/usbstorage/Make.defs @@ -58,7 +58,7 @@ ifeq ($(CONFIG_LPC17_DEVKITARM),y) endif ifeq ($(CONFIG_LPC17_BUILDROOT),y) # NuttX buildroot under Linux or Cygwin - CROSSDEV = arm-elf- + CROSSDEV = arm-nuttx-elf- ARCHCPUFLAGS = -mtune=cortex-m3 -march=armv7-m -mfloat-abi=soft MAXOPTIMIZATION = -Os endif @@ -120,7 +120,7 @@ OBJEXT = .o LIBEXT = .a EXEEXT = -ifneq ($(CROSSDEV),arm-elf-) +ifneq ($(CROSSDEV),arm-nuttx-elf-) LDFLAGS += -nostartfiles -nodefaultlibs endif ifeq ($(CONFIG_DEBUG_SYMBOLS),y) diff --git a/nuttx/configs/olimex-lpc1766stk/README.txt b/nuttx/configs/olimex-lpc1766stk/README.txt index aaf40f9ff..a8bea4d0e 100644 --- a/nuttx/configs/olimex-lpc1766stk/README.txt +++ b/nuttx/configs/olimex-lpc1766stk/README.txt @@ -534,7 +534,7 @@ Using OpenOCD and GDB with an FT2232 JTAG emulator Once the OpenOCD daemon has been started, you can connect to it via GDB using the following GDB command: - arm-elf-gdb + arm-nuttx-elf-gdb (gdb) target remote localhost:3333 NOTE: The name of your GDB program may differ. For example, with the diff --git a/nuttx/configs/olimex-lpc1766stk/ftpc/Make.defs b/nuttx/configs/olimex-lpc1766stk/ftpc/Make.defs index 82cf0a2cd..5671fdffb 100644 --- a/nuttx/configs/olimex-lpc1766stk/ftpc/Make.defs +++ b/nuttx/configs/olimex-lpc1766stk/ftpc/Make.defs @@ -58,7 +58,7 @@ ifeq ($(CONFIG_LPC17_DEVKITARM),y) endif ifeq ($(CONFIG_LPC17_BUILDROOT),y) # NuttX buildroot under Linux or Cygwin - CROSSDEV = arm-elf- + CROSSDEV = arm-nuttx-elf- ARCHCPUFLAGS = -mtune=cortex-m3 -march=armv7-m -mfloat-abi=soft MAXOPTIMIZATION = -Os endif @@ -123,7 +123,7 @@ OBJEXT = .o LIBEXT = .a EXEEXT = -ifneq ($(CROSSDEV),arm-elf-) +ifneq ($(CROSSDEV),arm-nuttx-elf-) LDFLAGS += -nostartfiles -nodefaultlibs endif ifeq ($(CONFIG_DEBUG_SYMBOLS),y) diff --git a/nuttx/configs/olimex-lpc1766stk/hidkbd/Make.defs b/nuttx/configs/olimex-lpc1766stk/hidkbd/Make.defs index dd9716814..1e7160c38 100644 --- a/nuttx/configs/olimex-lpc1766stk/hidkbd/Make.defs +++ b/nuttx/configs/olimex-lpc1766stk/hidkbd/Make.defs @@ -58,7 +58,7 @@ ifeq ($(CONFIG_LPC17_DEVKITARM),y) endif ifeq ($(CONFIG_LPC17_BUILDROOT),y) # NuttX buildroot under Linux or Cygwin - CROSSDEV = arm-elf- + CROSSDEV = arm-nuttx-elf- ARCHCPUFLAGS = -mtune=cortex-m3 -march=armv7-m -mfloat-abi=soft MAXOPTIMIZATION = -Os endif @@ -120,7 +120,7 @@ OBJEXT = .o LIBEXT = .a EXEEXT = -ifneq ($(CROSSDEV),arm-elf-) +ifneq ($(CROSSDEV),arm-nuttx-elf-) LDFLAGS += -nostartfiles -nodefaultlibs endif ifeq ($(CONFIG_DEBUG_SYMBOLS),y) diff --git a/nuttx/configs/olimex-lpc1766stk/nettest/Make.defs b/nuttx/configs/olimex-lpc1766stk/nettest/Make.defs index 634d97315..2502cf97b 100644 --- a/nuttx/configs/olimex-lpc1766stk/nettest/Make.defs +++ b/nuttx/configs/olimex-lpc1766stk/nettest/Make.defs @@ -58,7 +58,7 @@ ifeq ($(CONFIG_LPC17_DEVKITARM),y) endif ifeq ($(CONFIG_LPC17_BUILDROOT),y) # NuttX buildroot under Linux or Cygwin - CROSSDEV = arm-elf- + CROSSDEV = arm-nuttx-elf- ARCHCPUFLAGS = -mtune=cortex-m3 -march=armv7-m -mfloat-abi=soft MAXOPTIMIZATION = -Os endif @@ -120,7 +120,7 @@ OBJEXT = .o LIBEXT = .a EXEEXT = -ifneq ($(CROSSDEV),arm-elf-) +ifneq ($(CROSSDEV),arm-nuttx-elf-) LDFLAGS += -nostartfiles -nodefaultlibs endif ifeq ($(CONFIG_DEBUG_SYMBOLS),y) diff --git a/nuttx/configs/olimex-lpc1766stk/nsh/Make.defs b/nuttx/configs/olimex-lpc1766stk/nsh/Make.defs index af9750f40..7e62fd7fb 100644 --- a/nuttx/configs/olimex-lpc1766stk/nsh/Make.defs +++ b/nuttx/configs/olimex-lpc1766stk/nsh/Make.defs @@ -58,7 +58,7 @@ ifeq ($(CONFIG_LPC17_DEVKITARM),y) endif ifeq ($(CONFIG_LPC17_BUILDROOT),y) # NuttX buildroot under Linux or Cygwin - CROSSDEV = arm-elf- + CROSSDEV = arm-nuttx-elf- ARCHCPUFLAGS = -mtune=cortex-m3 -march=armv7-m -mfloat-abi=soft MAXOPTIMIZATION = -Os endif @@ -120,7 +120,7 @@ OBJEXT = .o LIBEXT = .a EXEEXT = -ifneq ($(CROSSDEV),arm-elf-) +ifneq ($(CROSSDEV),arm-nuttx-elf-) LDFLAGS += -nostartfiles -nodefaultlibs endif ifeq ($(CONFIG_DEBUG_SYMBOLS),y) diff --git a/nuttx/configs/olimex-lpc1766stk/nx/Make.defs b/nuttx/configs/olimex-lpc1766stk/nx/Make.defs index 685d827da..735e2bd0a 100644 --- a/nuttx/configs/olimex-lpc1766stk/nx/Make.defs +++ b/nuttx/configs/olimex-lpc1766stk/nx/Make.defs @@ -58,7 +58,7 @@ ifeq ($(CONFIG_LPC17_DEVKITARM),y) endif ifeq ($(CONFIG_LPC17_BUILDROOT),y) # NuttX buildroot under Linux or Cygwin - CROSSDEV = arm-elf- + CROSSDEV = arm-nuttx-elf- ARCHCPUFLAGS = -mtune=cortex-m3 -march=armv7-m -mfloat-abi=soft MAXOPTIMIZATION = -Os endif @@ -120,7 +120,7 @@ OBJEXT = .o LIBEXT = .a EXEEXT = -ifneq ($(CROSSDEV),arm-elf-) +ifneq ($(CROSSDEV),arm-nuttx-elf-) LDFLAGS += -nostartfiles -nodefaultlibs endif ifeq ($(CONFIG_DEBUG_SYMBOLS),y) diff --git a/nuttx/configs/olimex-lpc1766stk/ostest/Make.defs b/nuttx/configs/olimex-lpc1766stk/ostest/Make.defs index 84467ae64..7a9475761 100644 --- a/nuttx/configs/olimex-lpc1766stk/ostest/Make.defs +++ b/nuttx/configs/olimex-lpc1766stk/ostest/Make.defs @@ -58,7 +58,7 @@ ifeq ($(CONFIG_LPC17_DEVKITARM),y) endif ifeq ($(CONFIG_LPC17_BUILDROOT),y) # NuttX buildroot under Linux or Cygwin - CROSSDEV = arm-elf- + CROSSDEV = arm-nuttx-elf- ARCHCPUFLAGS = -mtune=cortex-m3 -march=armv7-m -mfloat-abi=soft MAXOPTIMIZATION = -Os endif @@ -120,7 +120,7 @@ OBJEXT = .o LIBEXT = .a EXEEXT = -ifneq ($(CROSSDEV),arm-elf-) +ifneq ($(CROSSDEV),arm-nuttx-elf-) LDFLAGS += -nostartfiles -nodefaultlibs endif ifeq ($(CONFIG_DEBUG_SYMBOLS),y) diff --git a/nuttx/configs/olimex-lpc1766stk/slip-httpd/Make.defs b/nuttx/configs/olimex-lpc1766stk/slip-httpd/Make.defs index 61b7f41e7..35d2c6480 100644 --- a/nuttx/configs/olimex-lpc1766stk/slip-httpd/Make.defs +++ b/nuttx/configs/olimex-lpc1766stk/slip-httpd/Make.defs @@ -58,7 +58,7 @@ ifeq ($(CONFIG_LPC17_DEVKITARM),y) endif ifeq ($(CONFIG_LPC17_BUILDROOT),y) # NuttX buildroot under Linux or Cygwin - CROSSDEV = arm-elf- + CROSSDEV = arm-nuttx-elf- ARCHCPUFLAGS = -mtune=cortex-m3 -march=armv7-m -mfloat-abi=soft MAXOPTIMIZATION = -Os endif @@ -123,7 +123,7 @@ OBJEXT = .o LIBEXT = .a EXEEXT = -ifneq ($(CROSSDEV),arm-elf-) +ifneq ($(CROSSDEV),arm-nuttx-elf-) LDFLAGS += -nostartfiles -nodefaultlibs endif ifeq ($(CONFIG_DEBUG_SYMBOLS),y) diff --git a/nuttx/configs/olimex-lpc1766stk/thttpd/Make.defs b/nuttx/configs/olimex-lpc1766stk/thttpd/Make.defs index 0e37dbaa3..dbd84c2a6 100644 --- a/nuttx/configs/olimex-lpc1766stk/thttpd/Make.defs +++ b/nuttx/configs/olimex-lpc1766stk/thttpd/Make.defs @@ -58,7 +58,7 @@ ifeq ($(CONFIG_LPC17_DEVKITARM),y) endif ifeq ($(CONFIG_LPC17_BUILDROOT),y) # NuttX buildroot under Linux or Cygwin - CROSSDEV = arm-elf- + CROSSDEV = arm-nuttx-elf- ARCHCPUFLAGS = -mtune=cortex-m3 -march=armv7-m -mfloat-abi=soft MAXOPTIMIZATION = -Os endif @@ -123,7 +123,7 @@ OBJEXT = .o LIBEXT = .a EXEEXT = -ifneq ($(CROSSDEV),arm-elf-) +ifneq ($(CROSSDEV),arm-nuttx-elf-) LDFLAGS += -nostartfiles -nodefaultlibs endif ifeq ($(CONFIG_DEBUG_SYMBOLS),y) diff --git a/nuttx/configs/olimex-lpc1766stk/usbserial/Make.defs b/nuttx/configs/olimex-lpc1766stk/usbserial/Make.defs index 7a56eb622..07cd41d46 100644 --- a/nuttx/configs/olimex-lpc1766stk/usbserial/Make.defs +++ b/nuttx/configs/olimex-lpc1766stk/usbserial/Make.defs @@ -58,7 +58,7 @@ ifeq ($(CONFIG_LPC17_DEVKITARM),y) endif ifeq ($(CONFIG_LPC17_BUILDROOT),y) # NuttX buildroot under Linux or Cygwin - CROSSDEV = arm-elf- + CROSSDEV = arm-nuttx-elf- ARCHCPUFLAGS = -mtune=cortex-m3 -march=armv7-m -mfloat-abi=soft MAXOPTIMIZATION = -Os endif @@ -120,7 +120,7 @@ OBJEXT = .o LIBEXT = .a EXEEXT = -ifneq ($(CROSSDEV),arm-elf-) +ifneq ($(CROSSDEV),arm-nuttx-elf-) LDFLAGS += -nostartfiles -nodefaultlibs endif ifeq ($(CONFIG_DEBUG_SYMBOLS),y) diff --git a/nuttx/configs/olimex-lpc1766stk/usbstorage/Make.defs b/nuttx/configs/olimex-lpc1766stk/usbstorage/Make.defs index 627cdd64e..76a6927ee 100644 --- a/nuttx/configs/olimex-lpc1766stk/usbstorage/Make.defs +++ b/nuttx/configs/olimex-lpc1766stk/usbstorage/Make.defs @@ -58,7 +58,7 @@ ifeq ($(CONFIG_LPC17_DEVKITARM),y) endif ifeq ($(CONFIG_LPC17_BUILDROOT),y) # NuttX buildroot under Linux or Cygwin - CROSSDEV = arm-elf- + CROSSDEV = arm-nuttx-elf- ARCHCPUFLAGS = -mtune=cortex-m3 -march=armv7-m -mfloat-abi=soft MAXOPTIMIZATION = -Os endif @@ -120,7 +120,7 @@ OBJEXT = .o LIBEXT = .a EXEEXT = -ifneq ($(CROSSDEV),arm-elf-) +ifneq ($(CROSSDEV),arm-nuttx-elf-) LDFLAGS += -nostartfiles -nodefaultlibs endif ifeq ($(CONFIG_DEBUG_SYMBOLS),y) diff --git a/nuttx/configs/olimex-lpc1766stk/wlan/Make.defs b/nuttx/configs/olimex-lpc1766stk/wlan/Make.defs index 1087fd8cc..0cc0d7edd 100644 --- a/nuttx/configs/olimex-lpc1766stk/wlan/Make.defs +++ b/nuttx/configs/olimex-lpc1766stk/wlan/Make.defs @@ -58,7 +58,7 @@ ifeq ($(CONFIG_LPC17_DEVKITARM),y) endif ifeq ($(CONFIG_LPC17_BUILDROOT),y) # NuttX buildroot under Linux or Cygwin - CROSSDEV = arm-elf- + CROSSDEV = arm-nuttx-elf- ARCHCPUFLAGS = -mtune=cortex-m3 -march=armv7-m -mfloat-abi=soft MAXOPTIMIZATION = -Os endif @@ -120,7 +120,7 @@ OBJEXT = .o LIBEXT = .a EXEEXT = -ifneq ($(CROSSDEV),arm-elf-) +ifneq ($(CROSSDEV),arm-nuttx-elf-) LDFLAGS += -nostartfiles -nodefaultlibs endif ifeq ($(CONFIG_DEBUG_SYMBOLS),y) diff --git a/nuttx/configs/olimex-lpc2378/nsh/Make.defs b/nuttx/configs/olimex-lpc2378/nsh/Make.defs index f81cfb448..2821aa73c 100644 --- a/nuttx/configs/olimex-lpc2378/nsh/Make.defs +++ b/nuttx/configs/olimex-lpc2378/nsh/Make.defs @@ -61,7 +61,7 @@ ifeq ($(CONFIG_OLIMEX_LPC2378_DEVKITARM),y) endif ifeq ($(CONFIG_OLIMEX_LPC2378_BUILDROOT),y) # NuttX buildroot under Linux or Cygwin - CROSSDEV = arm-elf- + CROSSDEV = arm-nuttx-elf- MAXOPTIMIZATION = -Os endif @@ -137,7 +137,7 @@ OBJEXT = .o LIBEXT = .a EXEEXT = -ifneq ($(CROSSDEV),arm-elf-) +ifneq ($(CROSSDEV),arm-nuttx-elf-) LDFLAGS += -nostartfiles -nodefaultlibs endif ifeq ($(CONFIG_DEBUG),y) diff --git a/nuttx/configs/olimex-lpc2378/ostest/Make.defs b/nuttx/configs/olimex-lpc2378/ostest/Make.defs index d13e5eda0..69be8db5b 100644 --- a/nuttx/configs/olimex-lpc2378/ostest/Make.defs +++ b/nuttx/configs/olimex-lpc2378/ostest/Make.defs @@ -61,7 +61,7 @@ ifeq ($(CONFIG_OLIMEX_LPC2378_DEVKITARM),y) endif ifeq ($(CONFIG_OLIMEX_LPC2378_BUILDROOT),y) # NuttX buildroot under Linux or Cygwin - CROSSDEV = arm-elf- + CROSSDEV = arm-nuttx-elf- MAXOPTIMIZATION = -Os endif @@ -137,7 +137,7 @@ OBJEXT = .o LIBEXT = .a EXEEXT = -ifneq ($(CROSSDEV),arm-elf-) +ifneq ($(CROSSDEV),arm-nuttx-elf-) LDFLAGS += -nostartfiles -nodefaultlibs endif ifeq ($(CONFIG_DEBUG),y) diff --git a/nuttx/configs/olimex-stm32-p107/nsh/Make.defs b/nuttx/configs/olimex-stm32-p107/nsh/Make.defs index a1a30f879..0108ef1ee 100644 --- a/nuttx/configs/olimex-stm32-p107/nsh/Make.defs +++ b/nuttx/configs/olimex-stm32-p107/nsh/Make.defs @@ -70,7 +70,7 @@ ifeq ($(CONFIG_STM32_RAISONANCE),y) endif ifeq ($(CONFIG_STM32_BUILDROOT),y) # NuttX buildroot under Linux or Cygwin - CROSSDEV = arm-elf- + CROSSDEV = arm-nuttx-elf- ARCHCPUFLAGS = -mtune=cortex-m3 -march=armv7-m -mfloat-abi=soft MAXOPTIMIZATION = -Os endif @@ -132,7 +132,7 @@ OBJEXT = .o LIBEXT = .a EXEEXT = -ifneq ($(CROSSDEV),arm-elf-) +ifneq ($(CROSSDEV),arm-nuttx-elf-) LDFLAGS += -nostartfiles -nodefaultlibs endif ifeq ($(CONFIG_DEBUG_SYMBOLS),y) diff --git a/nuttx/configs/olimex-stm32-p107/ostest/Make.defs b/nuttx/configs/olimex-stm32-p107/ostest/Make.defs index 2e8cf87ac..7cf5e765f 100644 --- a/nuttx/configs/olimex-stm32-p107/ostest/Make.defs +++ b/nuttx/configs/olimex-stm32-p107/ostest/Make.defs @@ -70,7 +70,7 @@ ifeq ($(CONFIG_STM32_RAISONANCE),y) endif ifeq ($(CONFIG_STM32_BUILDROOT),y) # NuttX buildroot under Linux or Cygwin - CROSSDEV = arm-elf- + CROSSDEV = arm-nuttx-elf- ARCHCPUFLAGS = -mtune=cortex-m3 -march=armv7-m -mfloat-abi=soft MAXOPTIMIZATION = -Os endif @@ -132,7 +132,7 @@ OBJEXT = .o LIBEXT = .a EXEEXT = -ifneq ($(CROSSDEV),arm-elf-) +ifneq ($(CROSSDEV),arm-nuttx-elf-) LDFLAGS += -nostartfiles -nodefaultlibs endif ifeq ($(CONFIG_DEBUG_SYMBOLS),y) diff --git a/nuttx/configs/olimex-strp711/README.txt b/nuttx/configs/olimex-strp711/README.txt index 955887d7b..74168dbfa 100644 --- a/nuttx/configs/olimex-strp711/README.txt +++ b/nuttx/configs/olimex-strp711/README.txt @@ -127,7 +127,7 @@ GNU Toolchain Options make # Will build for the NuttX buildroot toolchain make CROSSDEV=arm-eabi- # Will build for the devkitARM toolchain make CROSSDEV=arm-none-eabi- # Will build for the CodeSourcery toolchain - make CROSSDEV=arm-elf- # Will build for the NuttX buildroot toolchain + make CROSSDEV=arm-nuttx-elf- # Will build for the NuttX buildroot toolchain Of course, hard coding this CROSS_COMPILE value in Make.defs file will save some repetitive typing. @@ -267,7 +267,7 @@ GENERAL STEPS: 6. GDB - start arm-elf-gdb + start arm-nuttx-elf-gdb type 'file <executable.elf>' to load the executable type 'set debug remote 1' to enable tracing of gdb protocol (if required) type 'target remote localhost:3333' to connect to the target @@ -301,7 +301,7 @@ Windows OpenOCD will Olimex JTAG Once the OpenOCD daemon has been started, you can connect to it via GDB using the following GDB command: - arm-elf-gdb + arm-nuttx-elf-gdb (gdb) target remote localhost:3333 And you can load the NuttX ELF file into FLASH: diff --git a/nuttx/configs/olimex-strp711/nettest/Make.defs b/nuttx/configs/olimex-strp711/nettest/Make.defs index 9676e54fa..e4b8a9852 100644 --- a/nuttx/configs/olimex-strp711/nettest/Make.defs +++ b/nuttx/configs/olimex-strp711/nettest/Make.defs @@ -40,9 +40,9 @@ include ${TOPDIR}/tools/Config.mk # make -- Will build for the NuttX buildroot toolchain # make CROSSDEV=arm-eabi- -- Will build for the devkitARM toolchain # make CROSSDEV=arm-none-eabi- -- Will build for the CodeSourcery toolchain -# make CROSSDEV=arm-elf- -- Will build for the NuttX buildroot toolchain +# make CROSSDEV=arm-nuttx-elf- -- Will build for the NuttX buildroot toolchain -CROSSDEV = arm-elf- +CROSSDEV = arm-nuttx-elf- CC = $(CROSSDEV)gcc CXX = $(CROSSDEV)g++ CPP = $(CROSSDEV)gcc -E @@ -63,7 +63,7 @@ OBJCOPYARGS = -R .note -R .note.gnu.build-id -R .comment endif endif -ifeq ($(CROSSDEV),arm-elf-) +ifeq ($(CROSSDEV),arm-nuttx-elf-) MKDEP = $(TOPDIR)/tools/mkdeps.sh ARCHINCLUDES = -I. -isystem $(TOPDIR)/include ARCHXXINCLUDES = -I. -isystem $(TOPDIR)/include -isystem $(TOPDIR)/include/cxx @@ -118,7 +118,7 @@ OBJEXT = .o LIBEXT = .a EXEEXT = -ifneq ($(CROSSDEV),arm-elf-) +ifneq ($(CROSSDEV),arm-nuttx-elf-) LDFLAGS += -nostartfiles -nodefaultlibs endif ifeq ($(CONFIG_DEBUG_SYMBOLS),y) diff --git a/nuttx/configs/olimex-strp711/nsh/Make.defs b/nuttx/configs/olimex-strp711/nsh/Make.defs index ad75862fa..9ef265d0e 100644 --- a/nuttx/configs/olimex-strp711/nsh/Make.defs +++ b/nuttx/configs/olimex-strp711/nsh/Make.defs @@ -40,9 +40,9 @@ include ${TOPDIR}/tools/Config.mk # make -- Will build for the NuttX buildroot toolchain # make CROSSDEV=arm-eabi- -- Will build for the devkitARM toolchain # make CROSSDEV=arm-none-eabi- -- Will build for the CodeSourcery toolchain -# make CROSSDEV=arm-elf- -- Will build for the NuttX buildroot toolchain +# make CROSSDEV=arm-nuttx-elf- -- Will build for the NuttX buildroot toolchain -CROSSDEV = arm-elf- +CROSSDEV = arm-nuttx-elf- CC = $(CROSSDEV)gcc CXX = $(CROSSDEV)g++ CPP = $(CROSSDEV)gcc -E @@ -63,7 +63,7 @@ OBJCOPYARGS = -R .note -R .note.gnu.build-id -R .comment endif endif -ifeq ($(CROSSDEV),arm-elf-) +ifeq ($(CROSSDEV),arm-nuttx-elf-) MKDEP = $(TOPDIR)/tools/mkdeps.sh ARCHINCLUDES = -I. -isystem $(TOPDIR)/include ARCHXXINCLUDES = -I. -isystem $(TOPDIR)/include -isystem $(TOPDIR)/include/cxx @@ -118,7 +118,7 @@ OBJEXT = .o LIBEXT = .a EXEEXT = -ifneq ($(CROSSDEV),arm-elf-) +ifneq ($(CROSSDEV),arm-nuttx-elf-) LDFLAGS += -nostartfiles -nodefaultlibs endif ifeq ($(CONFIG_DEBUG_SYMBOLS),y) diff --git a/nuttx/configs/olimex-strp711/ostest/Make.defs b/nuttx/configs/olimex-strp711/ostest/Make.defs index 38fc7f5f2..f4bb09d99 100644 --- a/nuttx/configs/olimex-strp711/ostest/Make.defs +++ b/nuttx/configs/olimex-strp711/ostest/Make.defs @@ -40,9 +40,9 @@ include ${TOPDIR}/tools/Config.mk # make -- Will build for the NuttX buildroot toolchain # make CROSSDEV=arm-eabi- -- Will build for the devkitARM toolchain # make CROSSDEV=arm-none-eabi- -- Will build for the CodeSourcery toolchain -# make CROSSDEV=arm-elf- -- Will build for the NuttX buildroot toolchain +# make CROSSDEV=arm-nuttx-elf- -- Will build for the NuttX buildroot toolchain -CROSSDEV = arm-elf- +CROSSDEV = arm-nuttx-elf- CC = $(CROSSDEV)gcc CXX = $(CROSSDEV)g++ CPP = $(CROSSDEV)gcc -E @@ -63,7 +63,7 @@ OBJCOPYARGS = -R .note -R .note.gnu.build-id -R .comment endif endif -ifeq ($(CROSSDEV),arm-elf-) +ifeq ($(CROSSDEV),arm-nuttx-elf-) MKDEP = $(TOPDIR)/tools/mkdeps.sh ARCHINCLUDES = -I. -isystem $(TOPDIR)/include ARCHXXINCLUDES = -I. -isystem $(TOPDIR)/include -isystem $(TOPDIR)/include/cxx @@ -118,7 +118,7 @@ OBJEXT = .o LIBEXT = .a EXEEXT = -ifneq ($(CROSSDEV),arm-elf-) +ifneq ($(CROSSDEV),arm-nuttx-elf-) LDFLAGS += -nostartfiles -nodefaultlibs endif ifeq ($(CONFIG_DEBUG_SYMBOLS),y) diff --git a/nuttx/configs/qemu-i486/nsh/Make.defs b/nuttx/configs/qemu-i486/nsh/Make.defs index c68d3d34e..8b5fe61f6 100644 --- a/nuttx/configs/qemu-i486/nsh/Make.defs +++ b/nuttx/configs/qemu-i486/nsh/Make.defs @@ -78,7 +78,7 @@ endif # Cygwin toolchains don't generate ELF binaries. ifeq ($(HOSTOS),Cygwin) -CROSSDEV = i486-elf- +CROSSDEV = i486-nuttx-elf- else CROSSDEV = endif diff --git a/nuttx/configs/qemu-i486/ostest/Make.defs b/nuttx/configs/qemu-i486/ostest/Make.defs index fa7dc7bf8..0a2423456 100644 --- a/nuttx/configs/qemu-i486/ostest/Make.defs +++ b/nuttx/configs/qemu-i486/ostest/Make.defs @@ -78,7 +78,7 @@ endif # Cygwin toolchains don't generate ELF binaries. ifeq ($(HOSTOS),Cygwin) -CROSSDEV = i486-elf- +CROSSDEV = i486-nuttx-elf- else CROSSDEV = endif diff --git a/nuttx/configs/sam3u-ek/knsh/Make.defs b/nuttx/configs/sam3u-ek/knsh/Make.defs index cce80669a..bbe8b23c0 100644 --- a/nuttx/configs/sam3u-ek/knsh/Make.defs +++ b/nuttx/configs/sam3u-ek/knsh/Make.defs @@ -58,7 +58,7 @@ ifeq ($(CONFIG_SAM3U_DEVKITARM),y) endif ifeq ($(CONFIG_SAM3U_BUILDROOT),y) # NuttX buildroot under Linux or Cygwin - CROSSDEV = arm-elf- + CROSSDEV = arm-nuttx-elf- ARCHCPUFLAGS = -mtune=cortex-m3 -march=armv7-m -mfloat-abi=soft MAXOPTIMIZATION = -Os endif @@ -120,7 +120,7 @@ OBJEXT = .o LIBEXT = .a EXEEXT = -ifneq ($(CROSSDEV),arm-elf-) +ifneq ($(CROSSDEV),arm-nuttx-elf-) LDFLAGS += -nostartfiles -nodefaultlibs endif ifeq ($(CONFIG_DEBUG_SYMBOLS),y) diff --git a/nuttx/configs/sam3u-ek/nsh/Make.defs b/nuttx/configs/sam3u-ek/nsh/Make.defs index e4f24326d..0f236114f 100644 --- a/nuttx/configs/sam3u-ek/nsh/Make.defs +++ b/nuttx/configs/sam3u-ek/nsh/Make.defs @@ -58,7 +58,7 @@ ifeq ($(CONFIG_SAM3U_DEVKITARM),y) endif ifeq ($(CONFIG_SAM3U_BUILDROOT),y) # NuttX buildroot under Linux or Cygwin - CROSSDEV = arm-elf- + CROSSDEV = arm-nuttx-elf- ARCHCPUFLAGS = -mtune=cortex-m3 -march=armv7-m -mfloat-abi=soft MAXOPTIMIZATION = -Os endif @@ -120,7 +120,7 @@ OBJEXT = .o LIBEXT = .a EXEEXT = -ifneq ($(CROSSDEV),arm-elf-) +ifneq ($(CROSSDEV),arm-nuttx-elf-) LDFLAGS += -nostartfiles -nodefaultlibs endif ifeq ($(CONFIG_DEBUG_SYMBOLS),y) diff --git a/nuttx/configs/sam3u-ek/nx/Make.defs b/nuttx/configs/sam3u-ek/nx/Make.defs index e98aaf9d6..10cabe5a5 100644 --- a/nuttx/configs/sam3u-ek/nx/Make.defs +++ b/nuttx/configs/sam3u-ek/nx/Make.defs @@ -58,7 +58,7 @@ ifeq ($(CONFIG_SAM3U_DEVKITARM),y) endif ifeq ($(CONFIG_SAM3U_BUILDROOT),y) # NuttX buildroot under Linux or Cygwin - CROSSDEV = arm-elf- + CROSSDEV = arm-nuttx-elf- ARCHCPUFLAGS = -mtune=cortex-m3 -march=armv7-m -mfloat-abi=soft MAXOPTIMIZATION = -Os endif @@ -120,7 +120,7 @@ OBJEXT = .o LIBEXT = .a EXEEXT = -ifneq ($(CROSSDEV),arm-elf-) +ifneq ($(CROSSDEV),arm-nuttx-elf-) LDFLAGS += -nostartfiles -nodefaultlibs endif ifeq ($(CONFIG_DEBUG_SYMBOLS),y) diff --git a/nuttx/configs/sam3u-ek/ostest/Make.defs b/nuttx/configs/sam3u-ek/ostest/Make.defs index 7d38aedb2..7689fb2a1 100644 --- a/nuttx/configs/sam3u-ek/ostest/Make.defs +++ b/nuttx/configs/sam3u-ek/ostest/Make.defs @@ -58,7 +58,7 @@ ifeq ($(CONFIG_SAM3U_DEVKITARM),y) endif ifeq ($(CONFIG_SAM3U_BUILDROOT),y) # NuttX buildroot under Linux or Cygwin - CROSSDEV = arm-elf- + CROSSDEV = arm-nuttx-elf- ARCHCPUFLAGS = -mtune=cortex-m3 -march=armv7-m -mfloat-abi=soft MAXOPTIMIZATION = -Os endif @@ -120,7 +120,7 @@ OBJEXT = .o LIBEXT = .a EXEEXT = -ifneq ($(CROSSDEV),arm-elf-) +ifneq ($(CROSSDEV),arm-nuttx-elf-) LDFLAGS += -nostartfiles -nodefaultlibs endif ifeq ($(CONFIG_DEBUG_SYMBOLS),y) diff --git a/nuttx/configs/sam3u-ek/touchscreen/Make.defs b/nuttx/configs/sam3u-ek/touchscreen/Make.defs index 1dccbc6bc..2047daf68 100644 --- a/nuttx/configs/sam3u-ek/touchscreen/Make.defs +++ b/nuttx/configs/sam3u-ek/touchscreen/Make.defs @@ -58,7 +58,7 @@ ifeq ($(CONFIG_SAM3U_DEVKITARM),y) endif ifeq ($(CONFIG_SAM3U_BUILDROOT),y) # NuttX buildroot under Linux or Cygwin - CROSSDEV = arm-elf- + CROSSDEV = arm-nuttx-elf- ARCHCPUFLAGS = -mtune=cortex-m3 -march=armv7-m -mfloat-abi=soft MAXOPTIMIZATION = -Os endif @@ -120,7 +120,7 @@ OBJEXT = .o LIBEXT = .a EXEEXT = -ifneq ($(CROSSDEV),arm-elf-) +ifneq ($(CROSSDEV),arm-nuttx-elf-) LDFLAGS += -nostartfiles -nodefaultlibs endif ifeq ($(CONFIG_DEBUG_SYMBOLS),y) diff --git a/nuttx/configs/shenzhou/nsh/Make.defs b/nuttx/configs/shenzhou/nsh/Make.defs index 847866420..95495d4c4 100644 --- a/nuttx/configs/shenzhou/nsh/Make.defs +++ b/nuttx/configs/shenzhou/nsh/Make.defs @@ -82,8 +82,8 @@ ifeq ($(CONFIG_STM32_RAISONANCE),y) endif ifeq ($(CONFIG_STM32_BUILDROOT),y) # NuttX buildroot under Linux or Cygwin - CROSSDEV = arm-elf- - ARCROSSDEV = arm-elf- + CROSSDEV = arm-nuttx-elf- + ARCROSSDEV = arm-nuttx-elf- ARCHCPUFLAGS = -mtune=cortex-m3 -march=armv7-m -mfloat-abi=soft MAXOPTIMIZATION = -Os endif @@ -153,7 +153,7 @@ OBJEXT = .o LIBEXT = .a EXEEXT = -ifneq ($(CROSSDEV),arm-elf-) +ifneq ($(CROSSDEV),arm-nuttx-elf-) LDFLAGS += -nostartfiles -nodefaultlibs endif ifeq ($(CONFIG_DEBUG_SYMBOLS),y) diff --git a/nuttx/configs/shenzhou/nxwm/Make.defs b/nuttx/configs/shenzhou/nxwm/Make.defs index 0025282b4..96e0ffd4b 100644 --- a/nuttx/configs/shenzhou/nxwm/Make.defs +++ b/nuttx/configs/shenzhou/nxwm/Make.defs @@ -82,8 +82,8 @@ ifeq ($(CONFIG_STM32_RAISONANCE),y) endif ifeq ($(CONFIG_STM32_BUILDROOT),y) # NuttX buildroot under Linux or Cygwin - CROSSDEV = arm-elf- - ARCROSSDEV = arm-elf- + CROSSDEV = arm-nuttx-elf- + ARCROSSDEV = arm-nuttx-elf- ARCHCPUFLAGS = -mtune=cortex-m3 -march=armv7-m -mfloat-abi=soft MAXOPTIMIZATION = -Os endif @@ -153,7 +153,7 @@ OBJEXT = .o LIBEXT = .a EXEEXT = -ifneq ($(CROSSDEV),arm-elf-) +ifneq ($(CROSSDEV),arm-nuttx-elf-) LDFLAGS += -nostartfiles -nodefaultlibs endif ifeq ($(CONFIG_DEBUG_SYMBOLS),y) diff --git a/nuttx/configs/skp16c26/README.txt b/nuttx/configs/skp16c26/README.txt index dc94bbf8d..31332b59b 100644 --- a/nuttx/configs/skp16c26/README.txt +++ b/nuttx/configs/skp16c26/README.txt @@ -1,112 +1,112 @@ -configs/skp16c26/README.txt
-^^^^^^^^^^^^^^^^^^^^^^^^^^^
-
-1. The buildroot package can be used to build an M16C toolchain. The toolchain
- buildroot can be downloaded from misc/buildroot in the NuttX SVN. Insructions
- for building the toolchain are provided below.
-
- However, the target cannot be built because the GNU m16c-elf-ld link fails with
- the following message:
-
- m32c-elf-ld: BFD (GNU Binutils) 2.19 assertion fail /home/Owner/projects/nuttx/buildroot/toolchain_build_m32c/binutils-2.19/bfd/elf32-m32c.c:482
-
- Where the reference line is:
-
- /* If the symbol is out of range for a 16-bit address,
- we must have allocated a plt entry. */
- BFD_ASSERT (*plt_offset != (bfd_vma) -1);
-
- No workaround is known at this time. This is a show stopper for M16C.
-
-2. A supported version of the M16C toolchain is available here:
-
- http://www.kpitgnutools.com/index.php
-
- This download is free but requires registration. Unfortunately, this v0901 of
- this toolchain shows the same behavior:
-
- c:\Hew3\Tools\KPIT Cummins\GNUM16CM32C-ELF\v0901\m32c-elf\bin\m32c-elf-ld.exe: BFD (GNU Binutils) 2.19-GNUM16CM32C_v0901 assertion fail /home/kpit/fsfsrc/binutils-2.19/bfd/elf32-m32c.c:482
-
-It is possible that this error messasge my be telling me -- a very roundabout way --
-that I have exceeded the FLASH region, but I think that unlikely (it is difficult
-to know if the link does not complete gracefully).
-
-BUILDING THE R8C/M16C/M32C GNU TOOLCHAIN USING BUILDROOT
-^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
-
-NOTE: See the toolchain issues above -- you may not want to waste your time.
-
-1. CD to the correct directory.
-
- Change to the directory just above the NuttX installation. If <nuttx-dir> is
- where NuttX is installed, then cd to <nuttx-dir>/..
-
-2. Get and Install the buildroot Module
-
- a. Using a release tarball:
-
- cd <nuttx-dir>/..
- Download the appropriate buildroot package.
- unpack the buildroot package
- rename the directory to buildroot
-
- b. Using SVN
-
- Check out the misc/buildroot module. SVN checkout instructions:
-
- svn checkout svn://svn.code.sf.net/p/nuttx/code/trunk/buildroot buildroot
-
- Make the archive directory:
-
- mkdir archive
-
- The <nuttx-dir>/../buildroot is where the toolchain is built;
- The <nuttx-dir>/../archive directory is where toolchain sources will be downloaded.
-
-3. Make sure that NuttX is configured
-
- cd <nuttx-dir>/tools
- ./configure.sh <nuttx-configuration>
-
-4. Configure and Make the buildroot
-
- cd buildroot
- cp configs/m32c-defconfig-4.2.4 .config
- make oldconfig
- make
-
- This will download the large source packages for the toolchain and build the toolchain.
- The resulting binaries will be under buildroot/build_m32c. There will also be a
- large build directory called toolchain_build_m32c; this directory can be removed once
- the build completes successfully.
-
-Cygwin GCC BUILD NOTES
-^^^^^^^^^^^^^^^^^^^^^^
- On Cygwin, the buildroot 'make' command will fail with an error like:
-
- "...
- build/genchecksum cc1-dummy > cc1-checksum.c
- opening cc1-dummy: No such file or directory
- ..."
-
- This is caused because on Cygwin, host executables will be generated with the extension .exe
- and, apparently, the make variable "exeext" is set incorrectly. A work around after the
- above occurs is:
-
- cd toolchain_build_m32c/gcc-4.2.4-initial/gcc # Go to the directory where error occurred
- mv cc1-dummy.exe cc1-dummy # Rename the executable without .exe
- rm cc1-checksum.c # Get rid of the bad generated file
-
- Then resume the buildroot make:
-
- cd - # Back to the buildroot make directory
- make # Restart the build
-
- GCC is built twice. First a initial, "bootstap" GCC is produced in
- toolchain_build_m32c/gcc-4.2.4-initial, then the final GCC is produced in
- toolchain_build_m32c/gcc-4.2.4-final. The above error will occur twice: Once for
- the intial GCC build (see above) and once for the final GCC build. For the final GCC
- build, the workaround is the same except that the directory will be
- toolchain_build_m32c/gcc-4.2.4-final/gcc.
-
-
\ No newline at end of file +configs/skp16c26/README.txt +^^^^^^^^^^^^^^^^^^^^^^^^^^^ + +1. The buildroot package can be used to build an M16C toolchain. The toolchain + buildroot can be downloaded from misc/buildroot in the NuttX SVN. Insructions + for building the toolchain are provided below. + + However, the target cannot be built because the GNU m16c-nuttx-elf-ld link fails with + the following message: + + m32c-nuttx-elf-ld: BFD (GNU Binutils) 2.19 assertion fail /home/Owner/projects/nuttx/buildroot/toolchain_build_m32c/binutils-2.19/bfd/elf32-m32c.c:482 + + Where the reference line is: + + /* If the symbol is out of range for a 16-bit address, + we must have allocated a plt entry. */ + BFD_ASSERT (*plt_offset != (bfd_vma) -1); + + No workaround is known at this time. This is a show stopper for M16C. + +2. A supported version of the M16C toolchain is available here: + + http://www.kpitgnutools.com/index.php + + This download is free but requires registration. Unfortunately, this v0901 of + this toolchain shows the same behavior: + + c:\Hew3\Tools\KPIT Cummins\GNUM16CM32C-ELF\v0901\m32c-elf\bin\m32c-elf-ld.exe: BFD (GNU Binutils) 2.19-GNUM16CM32C_v0901 assertion fail /home/kpit/fsfsrc/binutils-2.19/bfd/elf32-m32c.c:482 + +It is possible that this error messasge my be telling me -- a very roundabout way -- +that I have exceeded the FLASH region, but I think that unlikely (it is difficult +to know if the link does not complete gracefully). + +BUILDING THE R8C/M16C/M32C GNU TOOLCHAIN USING BUILDROOT +^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^ + +NOTE: See the toolchain issues above -- you may not want to waste your time. + +1. CD to the correct directory. + + Change to the directory just above the NuttX installation. If <nuttx-dir> is + where NuttX is installed, then cd to <nuttx-dir>/.. + +2. Get and Install the buildroot Module + + a. Using a release tarball: + + cd <nuttx-dir>/.. + Download the appropriate buildroot package. + unpack the buildroot package + rename the directory to buildroot + + b. Using SVN + + Check out the misc/buildroot module. SVN checkout instructions: + + svn checkout svn://svn.code.sf.net/p/nuttx/code/trunk/buildroot buildroot + + Make the archive directory: + + mkdir archive + + The <nuttx-dir>/../buildroot is where the toolchain is built; + The <nuttx-dir>/../archive directory is where toolchain sources will be downloaded. + +3. Make sure that NuttX is configured + + cd <nuttx-dir>/tools + ./configure.sh <nuttx-configuration> + +4. Configure and Make the buildroot + + cd buildroot + cp configs/m32c-defconfig-4.2.4 .config + make oldconfig + make + + This will download the large source packages for the toolchain and build the toolchain. + The resulting binaries will be under buildroot/build_m32c. There will also be a + large build directory called toolchain_build_m32c; this directory can be removed once + the build completes successfully. + +Cygwin GCC BUILD NOTES +^^^^^^^^^^^^^^^^^^^^^^ + On Cygwin, the buildroot 'make' command will fail with an error like: + + "... + build/genchecksum cc1-dummy > cc1-checksum.c + opening cc1-dummy: No such file or directory + ..." + + This is caused because on Cygwin, host executables will be generated with the extension .exe + and, apparently, the make variable "exeext" is set incorrectly. A work around after the + above occurs is: + + cd toolchain_build_m32c/gcc-4.2.4-initial/gcc # Go to the directory where error occurred + mv cc1-dummy.exe cc1-dummy # Rename the executable without .exe + rm cc1-checksum.c # Get rid of the bad generated file + + Then resume the buildroot make: + + cd - # Back to the buildroot make directory + make # Restart the build + + GCC is built twice. First a initial, "bootstap" GCC is produced in + toolchain_build_m32c/gcc-4.2.4-initial, then the final GCC is produced in + toolchain_build_m32c/gcc-4.2.4-final. The above error will occur twice: Once for + the intial GCC build (see above) and once for the final GCC build. For the final GCC + build, the workaround is the same except that the directory will be + toolchain_build_m32c/gcc-4.2.4-final/gcc. + + diff --git a/nuttx/configs/skp16c26/ostest/Make.defs b/nuttx/configs/skp16c26/ostest/Make.defs index 79f014013..a7444daae 100644 --- a/nuttx/configs/skp16c26/ostest/Make.defs +++ b/nuttx/configs/skp16c26/ostest/Make.defs @@ -36,7 +36,7 @@ include ${TOPDIR}/.config include ${TOPDIR}/tools/Config.mk -CROSSDEV = m32c-elf- +CROSSDEV = m32c-nuttx-elf- CC = $(CROSSDEV)gcc CPP = $(CROSSDEV)gcc -E LD = $(CROSSDEV)ld diff --git a/nuttx/configs/stm3210e-eval/RIDE/Make.defs b/nuttx/configs/stm3210e-eval/RIDE/Make.defs index f24075038..dfd0f600b 100644 --- a/nuttx/configs/stm3210e-eval/RIDE/Make.defs +++ b/nuttx/configs/stm3210e-eval/RIDE/Make.defs @@ -70,7 +70,7 @@ ifeq ($(CONFIG_STM32_RAISONANCE),y) endif ifeq ($(CONFIG_STM32_BUILDROOT),y) # NuttX buildroot under Linux or Cygwin - CROSSDEV = arm-elf- + CROSSDEV = arm-nuttx-elf- ARCHCPUFLAGS = -mtune=cortex-m3 -march=armv7-m -mfloat-abi=soft MAXOPTIMIZATION = -Os endif @@ -132,7 +132,7 @@ OBJEXT = .o LIBEXT = .a EXEEXT = -ifneq ($(CROSSDEV),arm-elf-) +ifneq ($(CROSSDEV),arm-nuttx-elf-) LDFLAGS += -nostartfiles -nodefaultlibs endif ifeq ($(CONFIG_DEBUG_SYMBOLS),y) diff --git a/nuttx/configs/stm3210e-eval/buttons/Make.defs b/nuttx/configs/stm3210e-eval/buttons/Make.defs index ed7d6e7f0..9f0691bba 100644 --- a/nuttx/configs/stm3210e-eval/buttons/Make.defs +++ b/nuttx/configs/stm3210e-eval/buttons/Make.defs @@ -70,7 +70,7 @@ ifeq ($(CONFIG_STM32_RAISONANCE),y) endif ifeq ($(CONFIG_STM32_BUILDROOT),y) # NuttX buildroot under Linux or Cygwin - CROSSDEV = arm-elf- + CROSSDEV = arm-nuttx-elf- ARCHCPUFLAGS = -mtune=cortex-m3 -march=armv7-m -mfloat-abi=soft MAXOPTIMIZATION = -Os endif @@ -132,7 +132,7 @@ OBJEXT = .o LIBEXT = .a EXEEXT = -ifneq ($(CROSSDEV),arm-elf-) +ifneq ($(CROSSDEV),arm-nuttx-elf-) LDFLAGS += -nostartfiles -nodefaultlibs endif ifeq ($(CONFIG_DEBUG_SYMBOLS),y) diff --git a/nuttx/configs/stm3210e-eval/composite/Make.defs b/nuttx/configs/stm3210e-eval/composite/Make.defs index e08466429..9b855671f 100644 --- a/nuttx/configs/stm3210e-eval/composite/Make.defs +++ b/nuttx/configs/stm3210e-eval/composite/Make.defs @@ -70,7 +70,7 @@ ifeq ($(CONFIG_STM32_RAISONANCE),y) endif ifeq ($(CONFIG_STM32_BUILDROOT),y) # NuttX buildroot under Linux or Cygwin - CROSSDEV = arm-elf- + CROSSDEV = arm-nuttx-elf- ARCHCPUFLAGS = -mtune=cortex-m3 -march=armv7-m -mfloat-abi=soft MAXOPTIMIZATION = -Os endif @@ -132,7 +132,7 @@ OBJEXT = .o LIBEXT = .a EXEEXT = -ifneq ($(CROSSDEV),arm-elf-) +ifneq ($(CROSSDEV),arm-nuttx-elf-) LDFLAGS += -nostartfiles -nodefaultlibs endif ifeq ($(CONFIG_DEBUG_SYMBOLS),y) diff --git a/nuttx/configs/stm3210e-eval/nsh/Make.defs b/nuttx/configs/stm3210e-eval/nsh/Make.defs index 1e8e945b6..afdf0c097 100644 --- a/nuttx/configs/stm3210e-eval/nsh/Make.defs +++ b/nuttx/configs/stm3210e-eval/nsh/Make.defs @@ -70,7 +70,7 @@ ifeq ($(CONFIG_STM32_RAISONANCE),y) endif ifeq ($(CONFIG_STM32_BUILDROOT),y) # NuttX buildroot under Linux or Cygwin - CROSSDEV = arm-elf- + CROSSDEV = arm-nuttx-elf- ARCHCPUFLAGS = -mtune=cortex-m3 -march=armv7-m -mfloat-abi=soft MAXOPTIMIZATION = -Os endif @@ -132,7 +132,7 @@ OBJEXT = .o LIBEXT = .a EXEEXT = -ifneq ($(CROSSDEV),arm-elf-) +ifneq ($(CROSSDEV),arm-nuttx-elf-) LDFLAGS += -nostartfiles -nodefaultlibs endif ifeq ($(CONFIG_DEBUG_SYMBOLS),y) diff --git a/nuttx/configs/stm3210e-eval/nsh2/Make.defs b/nuttx/configs/stm3210e-eval/nsh2/Make.defs index 049c9d7a8..7d36c9a00 100644 --- a/nuttx/configs/stm3210e-eval/nsh2/Make.defs +++ b/nuttx/configs/stm3210e-eval/nsh2/Make.defs @@ -70,7 +70,7 @@ ifeq ($(CONFIG_STM32_RAISONANCE),y) endif ifeq ($(CONFIG_STM32_BUILDROOT),y) # NuttX buildroot under Linux or Cygwin - CROSSDEV = arm-elf- + CROSSDEV = arm-nuttx-elf- ARCHCPUFLAGS = -mtune=cortex-m3 -march=armv7-m -mfloat-abi=soft MAXOPTIMIZATION = -Os endif @@ -132,7 +132,7 @@ OBJEXT = .o LIBEXT = .a EXEEXT = -ifneq ($(CROSSDEV),arm-elf-) +ifneq ($(CROSSDEV),arm-nuttx-elf-) LDFLAGS += -nostartfiles -nodefaultlibs endif ifeq ($(CONFIG_DEBUG_SYMBOLS),y) diff --git a/nuttx/configs/stm3210e-eval/nx/Make.defs b/nuttx/configs/stm3210e-eval/nx/Make.defs index a553e0163..bb0ba5b6d 100644 --- a/nuttx/configs/stm3210e-eval/nx/Make.defs +++ b/nuttx/configs/stm3210e-eval/nx/Make.defs @@ -70,7 +70,7 @@ ifeq ($(CONFIG_STM32_RAISONANCE),y) endif ifeq ($(CONFIG_STM32_BUILDROOT),y) # NuttX buildroot under Linux or Cygwin - CROSSDEV = arm-elf- + CROSSDEV = arm-nuttx-elf- ARCHCPUFLAGS = -mtune=cortex-m3 -march=armv7-m -mfloat-abi=soft MAXOPTIMIZATION = -Os endif @@ -132,7 +132,7 @@ OBJEXT = .o LIBEXT = .a EXEEXT = -ifneq ($(CROSSDEV),arm-elf-) +ifneq ($(CROSSDEV),arm-nuttx-elf-) LDFLAGS += -nostartfiles -nodefaultlibs endif ifeq ($(CONFIG_DEBUG_SYMBOLS),y) diff --git a/nuttx/configs/stm3210e-eval/nxconsole/Make.defs b/nuttx/configs/stm3210e-eval/nxconsole/Make.defs index d55f4c61d..84b36b267 100644 --- a/nuttx/configs/stm3210e-eval/nxconsole/Make.defs +++ b/nuttx/configs/stm3210e-eval/nxconsole/Make.defs @@ -73,7 +73,7 @@ ifeq ($(CONFIG_STM32_RAISONANCE),y) endif ifeq ($(CONFIG_STM32_BUILDROOT),y) # NuttX buildroot under Linux or Cygwin - CROSSDEV = arm-elf- + CROSSDEV = arm-nuttx-elf- ARCHCPUFLAGS = -mtune=cortex-m3 -march=armv7-m -mfloat-abi=soft MAXOPTIMIZATION = -Os endif @@ -134,7 +134,7 @@ OBJEXT = .o LIBEXT = .a EXEEXT = -ifneq ($(CROSSDEV),arm-elf-) +ifneq ($(CROSSDEV),arm-nuttx-elf-) LDFLAGS += -nostartfiles -nodefaultlibs endif ifeq ($(CONFIG_DEBUG_SYMBOLS),y) diff --git a/nuttx/configs/stm3210e-eval/nxlines/Make.defs b/nuttx/configs/stm3210e-eval/nxlines/Make.defs index 83bd9eb5e..a896a901e 100644 --- a/nuttx/configs/stm3210e-eval/nxlines/Make.defs +++ b/nuttx/configs/stm3210e-eval/nxlines/Make.defs @@ -73,7 +73,7 @@ ifeq ($(CONFIG_STM32_RAISONANCE),y) endif ifeq ($(CONFIG_STM32_BUILDROOT),y) # NuttX buildroot under Linux or Cygwin - CROSSDEV = arm-elf- + CROSSDEV = arm-nuttx-elf- ARCHCPUFLAGS = -mtune=cortex-m3 -march=armv7-m -mfloat-abi=soft MAXOPTIMIZATION = -Os endif @@ -134,7 +134,7 @@ OBJEXT = .o LIBEXT = .a EXEEXT = -ifneq ($(CROSSDEV),arm-elf-) +ifneq ($(CROSSDEV),arm-nuttx-elf-) LDFLAGS += -nostartfiles -nodefaultlibs endif ifeq ($(CONFIG_DEBUG_SYMBOLS),y) diff --git a/nuttx/configs/stm3210e-eval/nxtext/Make.defs b/nuttx/configs/stm3210e-eval/nxtext/Make.defs index 4a082fc74..00370c3b0 100644 --- a/nuttx/configs/stm3210e-eval/nxtext/Make.defs +++ b/nuttx/configs/stm3210e-eval/nxtext/Make.defs @@ -73,7 +73,7 @@ ifeq ($(CONFIG_STM32_RAISONANCE),y) endif ifeq ($(CONFIG_STM32_BUILDROOT),y) # NuttX buildroot under Linux or Cygwin - CROSSDEV = arm-elf- + CROSSDEV = arm-nuttx-elf- ARCHCPUFLAGS = -mtune=cortex-m3 -march=armv7-m -mfloat-abi=soft MAXOPTIMIZATION = -Os endif @@ -134,7 +134,7 @@ OBJEXT = .o LIBEXT = .a EXEEXT = -ifneq ($(CROSSDEV),arm-elf-) +ifneq ($(CROSSDEV),arm-nuttx-elf-) LDFLAGS += -nostartfiles -nodefaultlibs endif ifeq ($(CONFIG_DEBUG_SYMBOLS),y) diff --git a/nuttx/configs/stm3210e-eval/ostest/Make.defs b/nuttx/configs/stm3210e-eval/ostest/Make.defs index 41a197457..09b3f0395 100644 --- a/nuttx/configs/stm3210e-eval/ostest/Make.defs +++ b/nuttx/configs/stm3210e-eval/ostest/Make.defs @@ -70,7 +70,7 @@ ifeq ($(CONFIG_STM32_RAISONANCE),y) endif ifeq ($(CONFIG_STM32_BUILDROOT),y) # NuttX buildroot under Linux or Cygwin - CROSSDEV = arm-elf- + CROSSDEV = arm-nuttx-elf- ARCHCPUFLAGS = -mtune=cortex-m3 -march=armv7-m -mfloat-abi=soft MAXOPTIMIZATION = -Os endif @@ -132,7 +132,7 @@ OBJEXT = .o LIBEXT = .a EXEEXT = -ifneq ($(CROSSDEV),arm-elf-) +ifneq ($(CROSSDEV),arm-nuttx-elf-) LDFLAGS += -nostartfiles -nodefaultlibs endif ifeq ($(CONFIG_DEBUG_SYMBOLS),y) diff --git a/nuttx/configs/stm3210e-eval/pm/Make.defs b/nuttx/configs/stm3210e-eval/pm/Make.defs index c298c4364..0cc96fa4e 100644 --- a/nuttx/configs/stm3210e-eval/pm/Make.defs +++ b/nuttx/configs/stm3210e-eval/pm/Make.defs @@ -70,7 +70,7 @@ ifeq ($(CONFIG_STM32_RAISONANCE),y) endif ifeq ($(CONFIG_STM32_BUILDROOT),y) # NuttX buildroot under Linux or Cygwin - CROSSDEV = arm-elf- + CROSSDEV = arm-nuttx-elf- ARCHCPUFLAGS = -mtune=cortex-m3 -march=armv7-m -mfloat-abi=soft MAXOPTIMIZATION = -Os endif @@ -132,7 +132,7 @@ OBJEXT = .o LIBEXT = .a EXEEXT = -ifneq ($(CROSSDEV),arm-elf-) +ifneq ($(CROSSDEV),arm-nuttx-elf-) LDFLAGS += -nostartfiles -nodefaultlibs endif ifeq ($(CONFIG_DEBUG_SYMBOLS),y) diff --git a/nuttx/configs/stm3210e-eval/usbserial/Make.defs b/nuttx/configs/stm3210e-eval/usbserial/Make.defs index f45de369e..cda6edf4e 100644 --- a/nuttx/configs/stm3210e-eval/usbserial/Make.defs +++ b/nuttx/configs/stm3210e-eval/usbserial/Make.defs @@ -70,7 +70,7 @@ ifeq ($(CONFIG_STM32_RAISONANCE),y) endif ifeq ($(CONFIG_STM32_BUILDROOT),y) # NuttX buildroot under Linux or Cygwin - CROSSDEV = arm-elf- + CROSSDEV = arm-nuttx-elf- ARCHCPUFLAGS = -mtune=cortex-m3 -march=armv7-m -mfloat-abi=soft MAXOPTIMIZATION = -Os endif @@ -132,7 +132,7 @@ OBJEXT = .o LIBEXT = .a EXEEXT = -ifneq ($(CROSSDEV),arm-elf-) +ifneq ($(CROSSDEV),arm-nuttx-elf-) LDFLAGS += -nostartfiles -nodefaultlibs endif ifeq ($(CONFIG_DEBUG_SYMBOLS),y) diff --git a/nuttx/configs/stm3210e-eval/usbstorage/Make.defs b/nuttx/configs/stm3210e-eval/usbstorage/Make.defs index e0a4de6f9..36688bc80 100644 --- a/nuttx/configs/stm3210e-eval/usbstorage/Make.defs +++ b/nuttx/configs/stm3210e-eval/usbstorage/Make.defs @@ -70,7 +70,7 @@ ifeq ($(CONFIG_STM32_RAISONANCE),y) endif ifeq ($(CONFIG_STM32_BUILDROOT),y) # NuttX buildroot under Linux or Cygwin - CROSSDEV = arm-elf- + CROSSDEV = arm-nuttx-elf- ARCHCPUFLAGS = -mtune=cortex-m3 -march=armv7-m -mfloat-abi=soft MAXOPTIMIZATION = -Os endif @@ -132,7 +132,7 @@ OBJEXT = .o LIBEXT = .a EXEEXT = -ifneq ($(CROSSDEV),arm-elf-) +ifneq ($(CROSSDEV),arm-nuttx-elf-) LDFLAGS += -nostartfiles -nodefaultlibs endif ifeq ($(CONFIG_DEBUG_SYMBOLS),y) diff --git a/nuttx/configs/stm3220g-eval/dhcpd/Make.defs b/nuttx/configs/stm3220g-eval/dhcpd/Make.defs index 4a94997a5..f75e94501 100644 --- a/nuttx/configs/stm3220g-eval/dhcpd/Make.defs +++ b/nuttx/configs/stm3220g-eval/dhcpd/Make.defs @@ -90,8 +90,8 @@ ifeq ($(CONFIG_STM32_RAISONANCE),y) endif ifeq ($(CONFIG_STM32_BUILDROOT),y) # NuttX buildroot under Linux or Cygwin - CROSSDEV = arm-elf- - ARCROSSDEV = arm-elf- + CROSSDEV = arm-nuttx-elf- + ARCROSSDEV = arm-nuttx-elf- ARCHCPUFLAGS = -mtune=cortex-m3 -march=armv7-m -mfloat-abi=soft MAXOPTIMIZATION = -Os endif @@ -155,7 +155,7 @@ OBJEXT = .o LIBEXT = .a EXEEXT = -ifneq ($(CROSSDEV),arm-elf-) +ifneq ($(CROSSDEV),arm-nuttx-elf-) LDFLAGS += -nostartfiles -nodefaultlibs endif ifeq ($(CONFIG_DEBUG_SYMBOLS),y) diff --git a/nuttx/configs/stm3220g-eval/nettest/Make.defs b/nuttx/configs/stm3220g-eval/nettest/Make.defs index c69852119..f307d9475 100644 --- a/nuttx/configs/stm3220g-eval/nettest/Make.defs +++ b/nuttx/configs/stm3220g-eval/nettest/Make.defs @@ -90,8 +90,8 @@ ifeq ($(CONFIG_STM32_RAISONANCE),y) endif ifeq ($(CONFIG_STM32_BUILDROOT),y) # NuttX buildroot under Linux or Cygwin - CROSSDEV = arm-elf- - ARCROSSDEV = arm-elf- + CROSSDEV = arm-nuttx-elf- + ARCROSSDEV = arm-nuttx-elf- ARCHCPUFLAGS = -mtune=cortex-m3 -march=armv7-m -mfloat-abi=soft MAXOPTIMIZATION = -Os endif @@ -155,7 +155,7 @@ OBJEXT = .o LIBEXT = .a EXEEXT = -ifneq ($(CROSSDEV),arm-elf-) +ifneq ($(CROSSDEV),arm-nuttx-elf-) LDFLAGS += -nostartfiles -nodefaultlibs endif ifeq ($(CONFIG_DEBUG_SYMBOLS),y) diff --git a/nuttx/configs/stm3220g-eval/nsh/Make.defs b/nuttx/configs/stm3220g-eval/nsh/Make.defs index 4b2bbef30..9fe8b0ffa 100644 --- a/nuttx/configs/stm3220g-eval/nsh/Make.defs +++ b/nuttx/configs/stm3220g-eval/nsh/Make.defs @@ -90,8 +90,8 @@ ifeq ($(CONFIG_STM32_RAISONANCE),y) endif ifeq ($(CONFIG_STM32_BUILDROOT),y) # NuttX buildroot under Linux or Cygwin - CROSSDEV = arm-elf- - ARCROSSDEV = arm-elf- + CROSSDEV = arm-nuttx-elf- + ARCROSSDEV = arm-nuttx-elf- ARCHCPUFLAGS = -mtune=cortex-m3 -march=armv7-m -mfloat-abi=soft MAXOPTIMIZATION = -Os endif @@ -155,7 +155,7 @@ OBJEXT = .o LIBEXT = .a EXEEXT = -ifneq ($(CROSSDEV),arm-elf-) +ifneq ($(CROSSDEV),arm-nuttx-elf-) LDFLAGS += -nostartfiles -nodefaultlibs endif ifeq ($(CONFIG_DEBUG_SYMBOLS),y) diff --git a/nuttx/configs/stm3220g-eval/nsh2/Make.defs b/nuttx/configs/stm3220g-eval/nsh2/Make.defs index d81350868..64f158ecb 100644 --- a/nuttx/configs/stm3220g-eval/nsh2/Make.defs +++ b/nuttx/configs/stm3220g-eval/nsh2/Make.defs @@ -90,8 +90,8 @@ ifeq ($(CONFIG_STM32_RAISONANCE),y) endif ifeq ($(CONFIG_STM32_BUILDROOT),y) # NuttX buildroot under Linux or Cygwin - CROSSDEV = arm-elf- - ARCROSSDEV = arm-elf- + CROSSDEV = arm-nuttx-elf- + ARCROSSDEV = arm-nuttx-elf- ARCHCPUFLAGS = -mtune=cortex-m3 -march=armv7-m -mfloat-abi=soft MAXOPTIMIZATION = -Os endif @@ -155,7 +155,7 @@ OBJEXT = .o LIBEXT = .a EXEEXT = -ifneq ($(CROSSDEV),arm-elf-) +ifneq ($(CROSSDEV),arm-nuttx-elf-) LDFLAGS += -nostartfiles -nodefaultlibs endif ifeq ($(CONFIG_DEBUG_SYMBOLS),y) diff --git a/nuttx/configs/stm3220g-eval/nxwm/Make.defs b/nuttx/configs/stm3220g-eval/nxwm/Make.defs index 616529e7e..37280e0c4 100644 --- a/nuttx/configs/stm3220g-eval/nxwm/Make.defs +++ b/nuttx/configs/stm3220g-eval/nxwm/Make.defs @@ -90,8 +90,8 @@ ifeq ($(CONFIG_STM32_RAISONANCE),y) endif ifeq ($(CONFIG_STM32_BUILDROOT),y) # NuttX buildroot under Linux or Cygwin - CROSSDEV = arm-elf- - ARCROSSDEV = arm-elf- + CROSSDEV = arm-nuttx-elf- + ARCROSSDEV = arm-nuttx-elf- ARCHCPUFLAGS = -mtune=cortex-m3 -march=armv7-m -mfloat-abi=soft MAXOPTIMIZATION = -Os endif @@ -155,7 +155,7 @@ OBJEXT = .o LIBEXT = .a EXEEXT = -ifneq ($(CROSSDEV),arm-elf-) +ifneq ($(CROSSDEV),arm-nuttx-elf-) LDFLAGS += -nostartfiles -nodefaultlibs endif ifeq ($(CONFIG_DEBUG_SYMBOLS),y) diff --git a/nuttx/configs/stm3220g-eval/ostest/Make.defs b/nuttx/configs/stm3220g-eval/ostest/Make.defs index 9d8c07dfa..41e8fff14 100644 --- a/nuttx/configs/stm3220g-eval/ostest/Make.defs +++ b/nuttx/configs/stm3220g-eval/ostest/Make.defs @@ -90,8 +90,8 @@ ifeq ($(CONFIG_STM32_RAISONANCE),y) endif ifeq ($(CONFIG_STM32_BUILDROOT),y) # NuttX buildroot under Linux or Cygwin - CROSSDEV = arm-elf- - ARCROSSDEV = arm-elf- + CROSSDEV = arm-nuttx-elf- + ARCROSSDEV = arm-nuttx-elf- ARCHCPUFLAGS = -mtune=cortex-m3 -march=armv7-m -mfloat-abi=soft MAXOPTIMIZATION = -Os endif @@ -155,7 +155,7 @@ OBJEXT = .o LIBEXT = .a EXEEXT = -ifneq ($(CROSSDEV),arm-elf-) +ifneq ($(CROSSDEV),arm-nuttx-elf-) LDFLAGS += -nostartfiles -nodefaultlibs endif ifeq ($(CONFIG_DEBUG_SYMBOLS),y) diff --git a/nuttx/configs/stm3220g-eval/telnetd/Make.defs b/nuttx/configs/stm3220g-eval/telnetd/Make.defs index 10725d727..416bfaa47 100644 --- a/nuttx/configs/stm3220g-eval/telnetd/Make.defs +++ b/nuttx/configs/stm3220g-eval/telnetd/Make.defs @@ -90,8 +90,8 @@ ifeq ($(CONFIG_STM32_RAISONANCE),y) endif ifeq ($(CONFIG_STM32_BUILDROOT),y) # NuttX buildroot under Linux or Cygwin - CROSSDEV = arm-elf- - ARCROSSDEV = arm-elf- + CROSSDEV = arm-nuttx-elf- + ARCROSSDEV = arm-nuttx-elf- ARCHCPUFLAGS = -mtune=cortex-m3 -march=armv7-m -mfloat-abi=soft MAXOPTIMIZATION = -Os endif @@ -155,7 +155,7 @@ OBJEXT = .o LIBEXT = .a EXEEXT = -ifneq ($(CROSSDEV),arm-elf-) +ifneq ($(CROSSDEV),arm-nuttx-elf-) LDFLAGS += -nostartfiles -nodefaultlibs endif ifeq ($(CONFIG_DEBUG_SYMBOLS),y) diff --git a/nuttx/configs/stm3240g-eval/dhcpd/Make.defs b/nuttx/configs/stm3240g-eval/dhcpd/Make.defs index 7fb1e0b7f..1c7a7cff0 100644 --- a/nuttx/configs/stm3240g-eval/dhcpd/Make.defs +++ b/nuttx/configs/stm3240g-eval/dhcpd/Make.defs @@ -90,8 +90,8 @@ ifeq ($(CONFIG_STM32_RAISONANCE),y) endif ifeq ($(CONFIG_STM32_BUILDROOT),y) # NuttX buildroot under Linux or Cygwin - CROSSDEV = arm-elf- - ARCROSSDEV = arm-elf- + CROSSDEV = arm-nuttx-elf- + ARCROSSDEV = arm-nuttx-elf- ARCHCPUFLAGS = -mtune=cortex-m3 -march=armv7-m -mfloat-abi=soft MAXOPTIMIZATION = -Os endif @@ -155,7 +155,7 @@ OBJEXT = .o LIBEXT = .a EXEEXT = -ifneq ($(CROSSDEV),arm-elf-) +ifneq ($(CROSSDEV),arm-nuttx-elf-) LDFLAGS += -nostartfiles -nodefaultlibs endif ifeq ($(CONFIG_DEBUG_SYMBOLS),y) diff --git a/nuttx/configs/stm3240g-eval/discover/Make.defs b/nuttx/configs/stm3240g-eval/discover/Make.defs index abcae0f5f..9cf9d5958 100644 --- a/nuttx/configs/stm3240g-eval/discover/Make.defs +++ b/nuttx/configs/stm3240g-eval/discover/Make.defs @@ -90,8 +90,8 @@ ifeq ($(CONFIG_STM32_RAISONANCE),y) endif ifeq ($(CONFIG_STM32_BUILDROOT),y) # NuttX buildroot under Linux or Cygwin - CROSSDEV = arm-elf- - ARCROSSDEV = arm-elf- + CROSSDEV = arm-nuttx-elf- + ARCROSSDEV = arm-nuttx-elf- ARCHCPUFLAGS = -mtune=cortex-m3 -march=armv7-m -mfloat-abi=soft MAXOPTIMIZATION = -Os endif @@ -155,7 +155,7 @@ OBJEXT = .o LIBEXT = .a EXEEXT = -ifneq ($(CROSSDEV),arm-elf-) +ifneq ($(CROSSDEV),arm-nuttx-elf-) LDFLAGS += -nostartfiles -nodefaultlibs endif ifeq ($(CONFIG_DEBUG_SYMBOLS),y) diff --git a/nuttx/configs/stm3240g-eval/nettest/Make.defs b/nuttx/configs/stm3240g-eval/nettest/Make.defs index a0a1cd58f..e8af4cbb5 100644 --- a/nuttx/configs/stm3240g-eval/nettest/Make.defs +++ b/nuttx/configs/stm3240g-eval/nettest/Make.defs @@ -90,8 +90,8 @@ ifeq ($(CONFIG_STM32_RAISONANCE),y) endif ifeq ($(CONFIG_STM32_BUILDROOT),y) # NuttX buildroot under Linux or Cygwin - CROSSDEV = arm-elf- - ARCROSSDEV = arm-elf- + CROSSDEV = arm-nuttx-elf- + ARCROSSDEV = arm-nuttx-elf- ARCHCPUFLAGS = -mtune=cortex-m3 -march=armv7-m -mfloat-abi=soft MAXOPTIMIZATION = -Os endif @@ -155,7 +155,7 @@ OBJEXT = .o LIBEXT = .a EXEEXT = -ifneq ($(CROSSDEV),arm-elf-) +ifneq ($(CROSSDEV),arm-nuttx-elf-) LDFLAGS += -nostartfiles -nodefaultlibs endif ifeq ($(CONFIG_DEBUG_SYMBOLS),y) diff --git a/nuttx/configs/stm3240g-eval/nsh/Make.defs b/nuttx/configs/stm3240g-eval/nsh/Make.defs index ab0ede05e..e88f1054b 100644 --- a/nuttx/configs/stm3240g-eval/nsh/Make.defs +++ b/nuttx/configs/stm3240g-eval/nsh/Make.defs @@ -90,8 +90,8 @@ ifeq ($(CONFIG_STM32_RAISONANCE),y) endif ifeq ($(CONFIG_STM32_BUILDROOT),y) # NuttX buildroot under Linux or Cygwin - CROSSDEV = arm-elf- - ARCROSSDEV = arm-elf- + CROSSDEV = arm-nuttx-elf- + ARCROSSDEV = arm-nuttx-elf- ARCHCPUFLAGS = -mtune=cortex-m3 -march=armv7-m -mfloat-abi=soft MAXOPTIMIZATION = -Os endif @@ -155,7 +155,7 @@ OBJEXT = .o LIBEXT = .a EXEEXT = -ifneq ($(CROSSDEV),arm-elf-) +ifneq ($(CROSSDEV),arm-nuttx-elf-) LDFLAGS += -nostartfiles -nodefaultlibs endif ifeq ($(CONFIG_DEBUG_SYMBOLS),y) diff --git a/nuttx/configs/stm3240g-eval/nsh2/Make.defs b/nuttx/configs/stm3240g-eval/nsh2/Make.defs index 7a0e19582..3e7fa8bd2 100644 --- a/nuttx/configs/stm3240g-eval/nsh2/Make.defs +++ b/nuttx/configs/stm3240g-eval/nsh2/Make.defs @@ -90,8 +90,8 @@ ifeq ($(CONFIG_STM32_RAISONANCE),y) endif ifeq ($(CONFIG_STM32_BUILDROOT),y) # NuttX buildroot under Linux or Cygwin - CROSSDEV = arm-elf- - ARCROSSDEV = arm-elf- + CROSSDEV = arm-nuttx-elf- + ARCROSSDEV = arm-nuttx-elf- ARCHCPUFLAGS = -mtune=cortex-m3 -march=armv7-m -mfloat-abi=soft MAXOPTIMIZATION = -Os endif @@ -155,7 +155,7 @@ OBJEXT = .o LIBEXT = .a EXEEXT = -ifneq ($(CROSSDEV),arm-elf-) +ifneq ($(CROSSDEV),arm-nuttx-elf-) LDFLAGS += -nostartfiles -nodefaultlibs endif ifeq ($(CONFIG_DEBUG_SYMBOLS),y) diff --git a/nuttx/configs/stm3240g-eval/nxconsole/Make.defs b/nuttx/configs/stm3240g-eval/nxconsole/Make.defs index 6c200d3ce..aedfacc80 100644 --- a/nuttx/configs/stm3240g-eval/nxconsole/Make.defs +++ b/nuttx/configs/stm3240g-eval/nxconsole/Make.defs @@ -90,8 +90,8 @@ ifeq ($(CONFIG_STM32_RAISONANCE),y) endif ifeq ($(CONFIG_STM32_BUILDROOT),y) # NuttX buildroot under Linux or Cygwin - CROSSDEV = arm-elf- - ARCROSSDEV = arm-elf- + CROSSDEV = arm-nuttx-elf- + ARCROSSDEV = arm-nuttx-elf- ARCHCPUFLAGS = -mtune=cortex-m3 -march=armv7-m -mfloat-abi=soft MAXOPTIMIZATION = -Os endif @@ -155,7 +155,7 @@ OBJEXT = .o LIBEXT = .a EXEEXT = -ifneq ($(CROSSDEV),arm-elf-) +ifneq ($(CROSSDEV),arm-nuttx-elf-) LDFLAGS += -nostartfiles -nodefaultlibs endif ifeq ($(CONFIG_DEBUG_SYMBOLS),y) diff --git a/nuttx/configs/stm3240g-eval/nxwm/Make.defs b/nuttx/configs/stm3240g-eval/nxwm/Make.defs index 167792094..631cfab86 100644 --- a/nuttx/configs/stm3240g-eval/nxwm/Make.defs +++ b/nuttx/configs/stm3240g-eval/nxwm/Make.defs @@ -90,8 +90,8 @@ ifeq ($(CONFIG_STM32_RAISONANCE),y) endif ifeq ($(CONFIG_STM32_BUILDROOT),y) # NuttX buildroot under Linux or Cygwin - CROSSDEV = arm-elf- - ARCROSSDEV = arm-elf- + CROSSDEV = arm-nuttx-elf- + ARCROSSDEV = arm-nuttx-elf- ARCHCPUFLAGS = -mtune=cortex-m3 -march=armv7-m -mfloat-abi=soft MAXOPTIMIZATION = -Os endif @@ -155,7 +155,7 @@ OBJEXT = .o LIBEXT = .a EXEEXT = -ifneq ($(CROSSDEV),arm-elf-) +ifneq ($(CROSSDEV),arm-nuttx-elf-) LDFLAGS += -nostartfiles -nodefaultlibs endif ifeq ($(CONFIG_DEBUG_SYMBOLS),y) diff --git a/nuttx/configs/stm3240g-eval/ostest/Make.defs b/nuttx/configs/stm3240g-eval/ostest/Make.defs index a7e7a1392..875d39f22 100644 --- a/nuttx/configs/stm3240g-eval/ostest/Make.defs +++ b/nuttx/configs/stm3240g-eval/ostest/Make.defs @@ -90,8 +90,8 @@ ifeq ($(CONFIG_STM32_RAISONANCE),y) endif ifeq ($(CONFIG_STM32_BUILDROOT),y) # NuttX buildroot under Linux or Cygwin - CROSSDEV = arm-elf- - ARCROSSDEV = arm-elf- + CROSSDEV = arm-nuttx-elf- + ARCROSSDEV = arm-nuttx-elf- ARCHCPUFLAGS = -mtune=cortex-m3 -march=armv7-m -mfloat-abi=soft MAXOPTIMIZATION = -Os endif @@ -155,7 +155,7 @@ OBJEXT = .o LIBEXT = .a EXEEXT = -ifneq ($(CROSSDEV),arm-elf-) +ifneq ($(CROSSDEV),arm-nuttx-elf-) LDFLAGS += -nostartfiles -nodefaultlibs endif ifeq ($(CONFIG_DEBUG_SYMBOLS),y) diff --git a/nuttx/configs/stm3240g-eval/telnetd/Make.defs b/nuttx/configs/stm3240g-eval/telnetd/Make.defs index 1ddbddaab..d0ed37f28 100644 --- a/nuttx/configs/stm3240g-eval/telnetd/Make.defs +++ b/nuttx/configs/stm3240g-eval/telnetd/Make.defs @@ -90,8 +90,8 @@ ifeq ($(CONFIG_STM32_RAISONANCE),y) endif ifeq ($(CONFIG_STM32_BUILDROOT),y) # NuttX buildroot under Linux or Cygwin - CROSSDEV = arm-elf- - ARCROSSDEV = arm-elf- + CROSSDEV = arm-nuttx-elf- + ARCROSSDEV = arm-nuttx-elf- ARCHCPUFLAGS = -mtune=cortex-m3 -march=armv7-m -mfloat-abi=soft MAXOPTIMIZATION = -Os endif @@ -155,7 +155,7 @@ OBJEXT = .o LIBEXT = .a EXEEXT = -ifneq ($(CROSSDEV),arm-elf-) +ifneq ($(CROSSDEV),arm-nuttx-elf-) LDFLAGS += -nostartfiles -nodefaultlibs endif ifeq ($(CONFIG_DEBUG_SYMBOLS),y) diff --git a/nuttx/configs/stm3240g-eval/webserver/Make.defs b/nuttx/configs/stm3240g-eval/webserver/Make.defs index 066935080..fbe1ffb0e 100644 --- a/nuttx/configs/stm3240g-eval/webserver/Make.defs +++ b/nuttx/configs/stm3240g-eval/webserver/Make.defs @@ -89,8 +89,8 @@ ifeq ($(CONFIG_STM32_RAISONANCE),y) endif ifeq ($(CONFIG_STM32_BUILDROOT),y) # NuttX buildroot under Linux or Cygwin - CROSSDEV = arm-elf- - ARCROSSDEV = arm-elf- + CROSSDEV = arm-nuttx-elf- + ARCROSSDEV = arm-nuttx-elf- ARCHCPUFLAGS = -mtune=cortex-m3 -march=armv7-m -mfloat-abi=soft MAXOPTIMIZATION = -Os endif @@ -154,7 +154,7 @@ OBJEXT = .o LIBEXT = .a EXEEXT = -ifneq ($(CROSSDEV),arm-elf-) +ifneq ($(CROSSDEV),arm-nuttx-elf-) LDFLAGS += -nostartfiles -nodefaultlibs endif ifeq ($(CONFIG_DEBUG_SYMBOLS),y) diff --git a/nuttx/configs/stm3240g-eval/xmlrpc/Make.defs b/nuttx/configs/stm3240g-eval/xmlrpc/Make.defs index eb02622e6..61b0d5c4e 100644 --- a/nuttx/configs/stm3240g-eval/xmlrpc/Make.defs +++ b/nuttx/configs/stm3240g-eval/xmlrpc/Make.defs @@ -90,8 +90,8 @@ ifeq ($(CONFIG_STM32_RAISONANCE),y) endif ifeq ($(CONFIG_STM32_BUILDROOT),y) # NuttX buildroot under Linux or Cygwin - CROSSDEV = arm-elf- - ARCROSSDEV = arm-elf- + CROSSDEV = arm-nuttx-elf- + ARCROSSDEV = arm-nuttx-elf- ARCHCPUFLAGS = -mtune=cortex-m3 -march=armv7-m -mfloat-abi=soft MAXOPTIMIZATION = -Os endif @@ -155,7 +155,7 @@ OBJEXT = .o LIBEXT = .a EXEEXT = -ifneq ($(CROSSDEV),arm-elf-) +ifneq ($(CROSSDEV),arm-nuttx-elf-) LDFLAGS += -nostartfiles -nodefaultlibs endif ifeq ($(CONFIG_DEBUG_SYMBOLS),y) diff --git a/nuttx/configs/stm32f4discovery/nsh/Make.defs b/nuttx/configs/stm32f4discovery/nsh/Make.defs index 4a776bffe..f4110cce3 100644 --- a/nuttx/configs/stm32f4discovery/nsh/Make.defs +++ b/nuttx/configs/stm32f4discovery/nsh/Make.defs @@ -90,8 +90,8 @@ ifeq ($(CONFIG_STM32_RAISONANCE),y) endif ifeq ($(CONFIG_STM32_BUILDROOT),y) # NuttX buildroot under Linux or Cygwin - CROSSDEV = arm-elf- - ARCROSSDEV = arm-elf- + CROSSDEV = arm-nuttx-elf- + ARCROSSDEV = arm-nuttx-elf- ARCHCPUFLAGS = -mtune=cortex-m3 -march=armv7-m -mfloat-abi=soft MAXOPTIMIZATION = -Os endif @@ -155,7 +155,7 @@ OBJEXT = .o LIBEXT = .a EXEEXT = -ifneq ($(CROSSDEV),arm-elf-) +ifneq ($(CROSSDEV),arm-nuttx-elf-) LDFLAGS += -nostartfiles -nodefaultlibs endif ifeq ($(CONFIG_DEBUG_SYMBOLS),y) diff --git a/nuttx/configs/stm32f4discovery/nxlines/Make.defs b/nuttx/configs/stm32f4discovery/nxlines/Make.defs index c728da7b3..8dab2009c 100644 --- a/nuttx/configs/stm32f4discovery/nxlines/Make.defs +++ b/nuttx/configs/stm32f4discovery/nxlines/Make.defs @@ -90,8 +90,8 @@ ifeq ($(CONFIG_STM32_RAISONANCE),y) endif ifeq ($(CONFIG_STM32_BUILDROOT),y) # NuttX buildroot under Linux or Cygwin - CROSSDEV = arm-elf- - ARCROSSDEV = arm-elf- + CROSSDEV = arm-nuttx-elf- + ARCROSSDEV = arm-nuttx-elf- ARCHCPUFLAGS = -mtune=cortex-m3 -march=armv7-m -mfloat-abi=soft MAXOPTIMIZATION = -Os endif @@ -155,7 +155,7 @@ OBJEXT = .o LIBEXT = .a EXEEXT = -ifneq ($(CROSSDEV),arm-elf-) +ifneq ($(CROSSDEV),arm-nuttx-elf-) LDFLAGS += -nostartfiles -nodefaultlibs endif ifeq ($(CONFIG_DEBUG_SYMBOLS),y) diff --git a/nuttx/configs/stm32f4discovery/ostest/Make.defs b/nuttx/configs/stm32f4discovery/ostest/Make.defs index 7ee437589..f20fddb84 100644 --- a/nuttx/configs/stm32f4discovery/ostest/Make.defs +++ b/nuttx/configs/stm32f4discovery/ostest/Make.defs @@ -90,8 +90,8 @@ ifeq ($(CONFIG_STM32_RAISONANCE),y) endif ifeq ($(CONFIG_STM32_BUILDROOT),y) # NuttX buildroot under Linux or Cygwin - CROSSDEV = arm-elf- - ARCROSSDEV = arm-elf- + CROSSDEV = arm-nuttx-elf- + ARCROSSDEV = arm-nuttx-elf- ARCHCPUFLAGS = -mtune=cortex-m3 -march=armv7-m -mfloat-abi=soft MAXOPTIMIZATION = -Os endif @@ -155,7 +155,7 @@ OBJEXT = .o LIBEXT = .a EXEEXT = -ifneq ($(CROSSDEV),arm-elf-) +ifneq ($(CROSSDEV),arm-nuttx-elf-) LDFLAGS += -nostartfiles -nodefaultlibs endif ifeq ($(CONFIG_DEBUG_SYMBOLS),y) diff --git a/nuttx/configs/stm32f4discovery/pm/Make.defs b/nuttx/configs/stm32f4discovery/pm/Make.defs index 8dc63684e..f96f439ee 100644 --- a/nuttx/configs/stm32f4discovery/pm/Make.defs +++ b/nuttx/configs/stm32f4discovery/pm/Make.defs @@ -90,8 +90,8 @@ ifeq ($(CONFIG_STM32_RAISONANCE),y) endif ifeq ($(CONFIG_STM32_BUILDROOT),y) # NuttX buildroot under Linux or Cygwin - CROSSDEV = arm-elf- - ARCROSSDEV = arm-elf- + CROSSDEV = arm-nuttx-elf- + ARCROSSDEV = arm-nuttx-elf- ARCHCPUFLAGS = -mtune=cortex-m3 -march=armv7-m -mfloat-abi=soft MAXOPTIMIZATION = -Os endif @@ -155,7 +155,7 @@ OBJEXT = .o LIBEXT = .a EXEEXT = -ifneq ($(CROSSDEV),arm-elf-) +ifneq ($(CROSSDEV),arm-nuttx-elf-) LDFLAGS += -nostartfiles -nodefaultlibs endif ifeq ($(CONFIG_DEBUG_SYMBOLS),y) diff --git a/nuttx/configs/teensy/hello/Make.defs b/nuttx/configs/teensy/hello/Make.defs index 72d51de14..cca88363c 100644 --- a/nuttx/configs/teensy/hello/Make.defs +++ b/nuttx/configs/teensy/hello/Make.defs @@ -57,7 +57,7 @@ endif ifeq ($(CONFIG_AVR_BUILDROOT),y) # NuttX buildroot GCC toolchain under Linux or Cygwin - CROSSDEV = avr-elf- + CROSSDEV = avr-nuttx-elf- MAXOPTIMIZATION = -O2 ARCHCPUFLAGS = -mmcu=at90usb1286 LDFLAGS += -nostartfiles -nodefaultlibs diff --git a/nuttx/configs/teensy/nsh/Make.defs b/nuttx/configs/teensy/nsh/Make.defs index e58b1596e..13f8e7902 100644 --- a/nuttx/configs/teensy/nsh/Make.defs +++ b/nuttx/configs/teensy/nsh/Make.defs @@ -57,7 +57,7 @@ endif ifeq ($(CONFIG_AVR_BUILDROOT),y) # NuttX buildroot GCC toolchain under Linux or Cygwin - CROSSDEV = avr-elf- + CROSSDEV = avr-nuttx-elf- MAXOPTIMIZATION = -O2 ARCHCPUFLAGS = -mmcu=at90usb1286 LDFLAGS += -nostartfiles -nodefaultlibs diff --git a/nuttx/configs/teensy/usbstorage/Make.defs b/nuttx/configs/teensy/usbstorage/Make.defs index b221491d6..706daf81f 100644 --- a/nuttx/configs/teensy/usbstorage/Make.defs +++ b/nuttx/configs/teensy/usbstorage/Make.defs @@ -57,7 +57,7 @@ endif ifeq ($(CONFIG_AVR_BUILDROOT),y) # NuttX buildroot GCC toolchain under Linux or Cygwin - CROSSDEV = avr-elf- + CROSSDEV = avr-nuttx-elf- MAXOPTIMIZATION = -O2 ARCHCPUFLAGS = -mmcu=at90usb1286 LDFLAGS += -nostartfiles -nodefaultlibs diff --git a/nuttx/configs/twr-k60n512/nsh/Make.defs b/nuttx/configs/twr-k60n512/nsh/Make.defs index ebeea90a5..99041bcc2 100644 --- a/nuttx/configs/twr-k60n512/nsh/Make.defs +++ b/nuttx/configs/twr-k60n512/nsh/Make.defs @@ -58,7 +58,7 @@ ifeq ($(CONFIG_KINETIS_DEVKITARM),y) endif ifeq ($(CONFIG_KINETIS_BUILDROOT),y) # NuttX buildroot under Linux or Cygwin - CROSSDEV = arm-elf- + CROSSDEV = arm-nuttx-elf- ARCHCPUFLAGS = -mtune=cortex-m3 -march=armv7-m -mfloat-abi=soft -mlong-calls MAXOPTIMIZATION = -Os endif @@ -120,7 +120,7 @@ OBJEXT = .o LIBEXT = .a EXEEXT = -ifneq ($(CROSSDEV),arm-elf-) +ifneq ($(CROSSDEV),arm-nuttx-elf-) LDFLAGS += -nostartfiles -nodefaultlibs endif ifeq ($(CONFIG_DEBUG_SYMBOLS),y) diff --git a/nuttx/configs/twr-k60n512/ostest/Make.defs b/nuttx/configs/twr-k60n512/ostest/Make.defs index 2f5e208fe..93c887a2d 100644 --- a/nuttx/configs/twr-k60n512/ostest/Make.defs +++ b/nuttx/configs/twr-k60n512/ostest/Make.defs @@ -58,7 +58,7 @@ ifeq ($(CONFIG_KINETIS_DEVKITARM),y) endif ifeq ($(CONFIG_KINETIS_BUILDROOT),y) # NuttX buildroot under Linux or Cygwin - CROSSDEV = arm-elf- + CROSSDEV = arm-nuttx-elf- ARCHCPUFLAGS = -mtune=cortex-m3 -march=armv7-m -mfloat-abi=soft -mlong-calls MAXOPTIMIZATION = -Os endif @@ -120,7 +120,7 @@ OBJEXT = .o LIBEXT = .a EXEEXT = -ifneq ($(CROSSDEV),arm-elf-) +ifneq ($(CROSSDEV),arm-nuttx-elf-) LDFLAGS += -nostartfiles -nodefaultlibs endif ifeq ($(CONFIG_DEBUG_SYMBOLS),y) diff --git a/nuttx/configs/us7032evb1/nsh/Make.defs b/nuttx/configs/us7032evb1/nsh/Make.defs index d861f5d48..9cbc41f5b 100644 --- a/nuttx/configs/us7032evb1/nsh/Make.defs +++ b/nuttx/configs/us7032evb1/nsh/Make.defs @@ -50,7 +50,7 @@ ARCHDEFINES = ARCHINCLUDES = -I. -isystem $(TOPDIR)/include ARCHSCRIPT = -T$(TOPDIR)/configs/$(CONFIG_ARCH_BOARD)/nsh/ld.script -CROSSDEV = sh-elf- +CROSSDEV = sh-nuttx-elf- CC = $(CROSSDEV)gcc CPP = $(CROSSDEV)gcc -E LD = $(CROSSDEV)ld diff --git a/nuttx/configs/us7032evb1/ostest/Make.defs b/nuttx/configs/us7032evb1/ostest/Make.defs index 580c12628..32f45edda 100644 --- a/nuttx/configs/us7032evb1/ostest/Make.defs +++ b/nuttx/configs/us7032evb1/ostest/Make.defs @@ -50,7 +50,7 @@ ARCHDEFINES = ARCHINCLUDES = -I. -isystem $(TOPDIR)/include ARCHSCRIPT = -T$(TOPDIR)/configs/$(CONFIG_ARCH_BOARD)/ostest/ld.script -CROSSDEV = sh-elf- +CROSSDEV = sh-nuttx-elf- CC = $(CROSSDEV)gcc CPP = $(CROSSDEV)gcc -E LD = $(CROSSDEV)ld diff --git a/nuttx/configs/vsn/nsh/Make.defs b/nuttx/configs/vsn/nsh/Make.defs index 15de85f60..abcdf49c1 100644 --- a/nuttx/configs/vsn/nsh/Make.defs +++ b/nuttx/configs/vsn/nsh/Make.defs @@ -70,7 +70,7 @@ ifeq ($(CONFIG_STM32_RAISONANCE),y) endif ifeq ($(CONFIG_STM32_BUILDROOT),y) # NuttX buildroot under Linux or Cygwin - CROSSDEV = arm-elf- + CROSSDEV = arm-nuttx-elf- ARCHCPUFLAGS = -mtune=cortex-m3 -march=armv7-m -mfloat-abi=soft MAXOPTIMIZATION = -Os endif @@ -132,7 +132,7 @@ OBJEXT = .o LIBEXT = .a EXEEXT = -ifneq ($(CROSSDEV),arm-elf-) +ifneq ($(CROSSDEV),arm-nuttx-elf-) LDFLAGS += -nostartfiles -nodefaultlibs endif ifeq ($(CONFIG_DEBUG_SYMBOLS),y) |