diff options
Diffstat (limited to 'nuttx/drivers/wireless/cc1101/ISM1_868MHzGFSK100kbps.c')
-rw-r--r-- | nuttx/drivers/wireless/cc1101/ISM1_868MHzGFSK100kbps.c | 113 |
1 files changed, 0 insertions, 113 deletions
diff --git a/nuttx/drivers/wireless/cc1101/ISM1_868MHzGFSK100kbps.c b/nuttx/drivers/wireless/cc1101/ISM1_868MHzGFSK100kbps.c deleted file mode 100644 index 5c4c58ab2..000000000 --- a/nuttx/drivers/wireless/cc1101/ISM1_868MHzGFSK100kbps.c +++ /dev/null @@ -1,113 +0,0 @@ -/**************************************************************************** - * drivers/wireless/cc1101/ISM1_868MHzGFSK100kbps.c - * - * Copyright (C) 2011 Uros Platise. All rights reserved. - * Copyright (C) 2011 Ales Verbic. All rights reserved. - * - * Authors: Uros Platise <uros.platise@isotel.eu> - * Ales Verbic <ales.verbic@isotel.eu> - * - * Redistribution and use in source and binary forms, with or without - * modification, are permitted provided that the following conditions - * are met: - * - * 1. Redistributions of source code must retain the above copyright - * notice, this list of conditions and the following disclaimer. - * 2. Redistributions in binary form must reproduce the above copyright - * notice, this list of conditions and the following disclaimer in - * the documentation and/or other materials provided with the - * distribution. - * 3. Neither the name NuttX nor the names of its contributors may be - * used to endorse or promote products derived from this software - * without specific prior written permission. - * - * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS - * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT - * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS - * FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE - * COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, - * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, - * BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS - * OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED - * AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT - * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN - * ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE - * POSSIBILITY OF SUCH DAMAGE. - * - ****************************************************************************/ - -#include <nuttx/wireless/cc1101.h> - -/** Settings for 868 MHz, GFSK at 100kbps - * - * ISM Region 1 (Europe) only, Band 868–870 MHz - * - * Frequency ERP Duty Cycle Bandwidth Remarks - * 868 – 868.6 MHz +14 dBm < 1% No limits - * 868.7 – 869.2 MHz +14 dBm < 0.1% No limits - * 869.3 – 869.4 MHz +10 dBm No limits < 25 kHz Appropriate access protocol required - * 869.4 – 869.65 MHz +27 dBm < 10% < 25 kHz Channels may be combined to one high speed channel - * 869.7 -870 MHz +7 dBm No limits No limits - * - * Deviation = 46.142578 - * Base frequency = 867.999985 - * Carrier frequency = 867.999985 - * Channel number = 0 - * Carrier frequency = 867.999985 - * Modulated = true - * Modulation format = GFSK - * Manchester enable = false - * Sync word qualifier mode = 30/32 sync word bits detected - * Preamble count = 4 - * Channel spacing = 199.813843 - * Carrier frequency = 867.999985 - * Data rate = 99.9069 - * RX filter BW = 210.937500 - * Data format = Normal mode - * Length config = Fixed packet length mode. Length configured in PKTLEN register - * CRC enable = true - * Packet length = 62 - * Device address = 00 - * Address config = NO Address check, no broadcast - * CRC autoflush = true - * PA ramping = false - * TX power = 0 - */ -const struct c1101_rfsettings_s cc1101_rfsettings_ISM1_868MHzGFSK100kbps = { - .FSCTRL1 = 0x08, // FSCTRL1 Frequency Synthesizer Control - .FSCTRL0 = 0x00, // FSCTRL0 Frequency Synthesizer Control - - .FREQ2 = 0x20, // FREQ2 Frequency Control Word, High Byte - .FREQ1 = 0x25, // FREQ1 Frequency Control Word, Middle Byte - .FREQ0 = 0xED, // FREQ0 Frequency Control Word, Low Byte - - .MDMCFG4 = 0x8B, // MDMCFG4 Modem Configuration - .MDMCFG3 = 0xE5, // MDMCFG3 Modem Configuration - .MDMCFG2 = 0x13, // MDMCFG2 Modem Configuration - .MDMCFG1 = 0x22, // MDMCFG1 Modem Configuration - .MDMCFG0 = 0xE5, // MDMCFG0 Modem Configuration - - .DEVIATN = 0x46, // DEVIATN Modem Deviation Setting - - .FOCCFG = 0x1D, // FOCCFG Frequency Offset Compensation Configuration - - .BSCFG = 0x1C, // BSCFG Bit Synchronization Configuration - - .AGCCTRL2= 0xC7, // AGCCTRL2 AGC Control - .AGCCTRL1= 0x00, // AGCCTRL1 AGC Control - .AGCCTRL0= 0xB2, // AGCCTRL0 AGC Control - - .FREND1 = 0xB6, // FREND1 Front End RX Configuration - .FREND0 = 0x10, // FREND0 Front End TX Configuration - - .FSCAL3 = 0xEA, // FSCAL3 Frequency Synthesizer Calibration - .FSCAL2 = 0x2A, // FSCAL2 Frequency Synthesizer Calibration - .FSCAL1 = 0x00, // FSCAL1 Frequency Synthesizer Calibration - .FSCAL0 = 0x1F, // FSCAL0 Frequency Synthesizer Calibration - - .CHMIN = 0, // Fix at 9th channel: 869.80 MHz +- 100 kHz RF Bandwidth - .CHMAX = 9, // single channel - - .PAMAX = 8, // 0 means power OFF, 8 represents PA[7] - .PA = {0x03, 0x0F, 0x1E, 0x27, 0x67, 0x50, 0x81, 0xC2} -}; |