diff options
Diffstat (limited to 'nuttx/examples/nxflat/tests/hello++/Makefile')
-rw-r--r-- | nuttx/examples/nxflat/tests/hello++/Makefile | 180 |
1 files changed, 0 insertions, 180 deletions
diff --git a/nuttx/examples/nxflat/tests/hello++/Makefile b/nuttx/examples/nxflat/tests/hello++/Makefile deleted file mode 100644 index 113520da5..000000000 --- a/nuttx/examples/nxflat/tests/hello++/Makefile +++ /dev/null @@ -1,180 +0,0 @@ -############################################################################ -# examples/nxflat/tests/hello/Makefile -# -# Copyright (C) 2009 Gregory Nutt. All rights reserved. -# Author: Gregory Nutt <spudmonkey@racsa.co.cr> -# -# Redistribution and use in source and binary forms, with or without -# modification, are permitted provided that the following conditions -# are met: -# -# 1. Redistributions of source code must retain the above copyright -# notice, this list of conditions and the following disclaimer. -# 2. Redistributions in binary form must reproduce the above copyright -# notice, this list of conditions and the following disclaimer in -# the documentation and/or other materials provided with the -# distribution. -# 3. Neither the name NuttX nor the names of its contributors may be -# used to endorse or promote products derived from this software -# without specific prior written permission. -# -# THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS -# "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT -# LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS -# FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE -# COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, -# INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, -# BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS -# OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED -# AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT -# LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN -# ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE -# POSSIBILITY OF SUCH DAMAGE. -# -############################################################################ - --include $(TOPDIR)/.config # Current configuration --include $(TOPDIR)/Make.defs # Basic make info - -BIN1 = hello++1 -BIN2 = hello++2 -BIN3 = hello++3 -#BIN4 = hello++4 -ALL_BIN = $(BIN1) $(BIN2) $(BIN3) $(BIN4) - -R1SRCS1 = $(BIN1).c -R1OBJS1 = $(R1SRCS1:.c=.o) -R2SRC1 = $(BIN1)-thunk.S -R2OBJ1 = $(R2SRC1:.S=.o) - -R1SRCS2 = $(BIN2).c -R1OBJS2 = $(R1SRCS2:.c=.o) -R2SRC2 = $(BIN2)-thunk.S -R2OBJ2 = $(R2SRC2:.S=.o) - -R1SRCS3 = $(BIN3).c -R1OBJS3 = $(R1SRCS3:.c=.o) -R2SRC3 = $(BIN3)-thunk.S -R2OBJ3 = $(R2SRC3:.S=.o) - -#R1SRCS4 = $(BIN4).c -#R1OBJS4 = $(R1SRCS4:.c=.o) -#R2SRC4 = $(BIN4)-thunk.S -#R2OBJ4 = $(R2SRC4:.S=.o) - -DERIVED = $(R2SRC1) $(R2SRC2) $(R2SRC3) $(R2SRC4) - -R1CXXOBJS = $(R1OBJS1) $(R1OBJS2) $(R1OBJS3) # $(R1OBJS4) -R2AOBJS = $(R2OBJ1) $(R2OBJ2) $(R2OBJ3) # $(R2OBJ4) - -LIBSTDC_STUBS_DIR = $(TOPDIR)/libxx -LIBSTDC_STUBS_LIB = $(LIBSTDC_STUBS_DIR)/liblibxx.a - -all: $(BIN1) $(BIN2) $(BIN3) # $(BIN4) - -$(R1CXXOBJS): %.o: %.cpp - @echo "CC: $<" - @$(CXX) -c $(CXXPICFLAGS) $< -o $@ - -$(R2AOBJS): %.o: %.S - @echo "AS: $<" - @$(CC) -c $(CPICFLAGS) $< -o $@ - -# This contains libstdc++ stubs to that you can build C++ code -# without actually having libstdc++ - -$(LIBSTDC_STUBS_LIB): - @$(MAKE) -C $(LIBSTDC_STUBS_DIR) TOPDIR=$(TOPDIR) - -# BIN1 and BIN2 link just like C code because they contain no -# static constructors. BIN1 is equivalent to a C hello world; -# BIN2 contains a class that implements hello world, but it is -# not statically initialized. - -$(BIN1).r1: $(R1OBJS1) - @echo "LD: $<" - @$(LD) $(NXFLATLDFLAGS1) -o $@ $^ - -$(R2SRC1): $(BIN1).r1 - @echo "MK: $<" - @$(MKNXFLAT) -o $@ $^ - -$(BIN1).r2: $(R2OBJ1) - @echo "LD: $<" - @$(LD) $(NXFLATLDFLAGS2) -o $@ $(R1OBJS1) $(R2OBJ1) - -$(BIN1): $(BIN1).r2 - @echo "LD: $<" - @$(LDNXFLAT) $(LDNXFLATFLAGS) -o $@ $^ - -$(BIN2).r1: $(R1OBJS2) $(LIBSTDC_STUBS_LIB) - @echo "LD: $<" - @$(LD) $(NXFLATLDFLAGS1) -o $@ $^ - -$(R2SRC2): $(BIN2).r1 - @echo "MK: $<" - @$(MKNXFLAT) -o $@ $^ - -$(BIN2).r2: $(R2OBJ2) - @$(LD) $(NXFLATLDFLAGS2) -o $@ $(R1OBJS2) $(R2OBJ2) - -$(BIN2): $(BIN2).r2 - @echo "LD: $<" - @$(LDNXFLAT) $(LDNXFLATFLAGS) -o $@ $^ - -# BIN3 and BIN4 require that we include --cxx in the xflat-ld command. -# This will instruct xflat-ld that we want it to put together the correct -# startup files to handle the C++ static initializers. -# -# BIN3 is equivalent to BIN2 except that is uses static initializers - -$(BIN3).r1: $(R1OBJS3) $(LIBSTDC_STUBS_LIB) - @echo "LD: $<" - @$(LD) $(NXFLATLDFLAGS1) -o $@ $^ - -$(R2SRC3): $(BIN3).r1 - @echo "MK: $<" - @$(MKNXFLAT) -o $@ $^ - -$(BIN3).r2: $(R2OBJ3) - @echo "LD: $<" - @$(LD) $(NXFLATLDFLAGS2) -o $@ $(R1OBJS3) $(R2OBJ3) - -$(BIN3): $(BIN3).r2 - @echo "LD: $<" - @$(LDNXFLAT) $(LDNXFLATFLAGS) -o $@ $^ - -# BIN4 is similar to BIN3 except that it uses the streams code from libstdc++ -# -# NOTE: libstdc++ is not available for XFLAT as of this writing -# -#$(BIN4).r1: $(R1OBJS4) $(LIBSTDC_STUBS_LIB) -# @echo "LD: $<" -# $(LD) $(NXFLATLDFLAGS1) -o $@ $^ -# -#$(R2SRC4): $(BIN4).r1 -# @echo "MK: $<" -# $(MKNXFLAT) -o $@ $^ -# -#$(BIN4).r2: $(R2OBJ4)# @echo "LD: $<" -# $(LD) $(NXFLATLDFLAGS2) -o $@ $(R1OBJS4) $(R2OBJ4) -# -#$(BIN4): $(BIN4).r2 -# @echo "LD: $<" -# $(LDNXFLAT) $(LDNXFLATFLAGS) -o $@ $^ - -clean: - @rm -f $(ALL_BIN) $(DERIVED) *.o *.r1 *.r2 *~ .*.swp core - -install: $(ALL_BIN) - @install -D $(BIN1) $(ROMFS_DIR)/$(BIN1) - @install -D $(BIN2) $(ROMFS_DIR)/$(BIN2) - @install -D $(BIN3) $(ROMFS_DIR)/$(BIN3) -# @install -D $(BIN4) $(ROMFS_DIR)/$(BIN4) - - - - - - - |