diff options
Diffstat (limited to 'nuttx/examples/ostest/cond.c')
-rw-r--r-- | nuttx/examples/ostest/cond.c | 294 |
1 files changed, 0 insertions, 294 deletions
diff --git a/nuttx/examples/ostest/cond.c b/nuttx/examples/ostest/cond.c deleted file mode 100644 index 11191b7d5..000000000 --- a/nuttx/examples/ostest/cond.c +++ /dev/null @@ -1,294 +0,0 @@ -/*********************************************************************** - * cond.c - * - * Copyright (C) 2007, 2008 Gregory Nutt. All rights reserved. - * Author: Gregory Nutt <spudmonkey@racsa.co.cr> - * - * Redistribution and use in source and binary forms, with or without - * modification, are permitted provided that the following conditions - * are met: - * - * 1. Redistributions of source code must retain the above copyright - * notice, this list of conditions and the following disclaimer. - * 2. Redistributions in binary form must reproduce the above copyright - * notice, this list of conditions and the following disclaimer in - * the documentation and/or other materials provided with the - * distribution. - * 3. Neither the name NuttX nor the names of its contributors may be - * used to endorse or promote products derived from this software - * without specific prior written permission. - * - * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS - * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT - * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS - * FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE - * COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, - * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, - * BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS - * OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED - * AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT - * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN - * ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE - * POSSIBILITY OF SUCH DAMAGE. - * - ***********************************************************************/ - -#include <stdio.h> -#include <pthread.h> -#include <unistd.h> -#include "ostest.h" - -#ifndef NULL -# define NULL (void*)0 -#endif - -static volatile enum { RUNNING, MUTEX_WAIT, COND_WAIT} waiter_state; - -static pthread_mutex_t mutex; -static pthread_cond_t cond; -static volatile int data_available = 0; -static int waiter_nloops = 0; -static int waiter_waits = 0; -static int waiter_nerrors = 0; -static int signaler_nloops = 0; -static int signaler_already = 0; -static int signaler_state = 0; -static int signaler_nerrors = 0; - -static void *thread_waiter(void *parameter) -{ - int status; - - printf("waiter_thread: Started\n"); - - for(;;) - { - /* Take the mutex */ - - waiter_state = MUTEX_WAIT; - status = pthread_mutex_lock(&mutex); - waiter_state = RUNNING; - - if (status != 0) - { - printf("waiter_thread: ERROR pthread_mutex_lock failed, status=%d\n", status); - waiter_nerrors++; - } - - /* Check if data is available -- if data is not available then - * wait for it - */ - - if (!data_available) - { - /* We are higher priority than the signaler thread so the - * only time that the signaler thread will have a chance to run is when - * we are waiting for the condition variable. In this case, pthread_cond_wait - * will automatically release the mutex for the signaler (then re-acquire - * the mutex before returning. - */ - - waiter_state = COND_WAIT; - status = pthread_cond_wait(&cond, &mutex); - waiter_state = RUNNING; - - if (status != 0) - { - printf("waiter_thread: ERROR pthread_cond_wait failed, status=%d\n", status); - waiter_nerrors++; - } - waiter_waits++; - } - - /* Now data should be available */ - - if (!data_available) - { - printf("waiter_thread: ERROR data not available after wait\n"); - waiter_nerrors++; - } - - /* Clear data available */ - - data_available = 0; - - /* Release the mutex */ - - status = pthread_mutex_unlock(&mutex); - if (status != 0) - { - printf("waiter_thread: ERROR waiter: pthread_mutex_unlock failed, status=%d\n", status); - waiter_nerrors++; - } - - waiter_nloops++; - } - return NULL; -} - -static void *thread_signaler(void *parameter) -{ - int status; - int i; - - printf("thread_signaler: Started\n"); - for (i = 0; i < 32; i++) - { - /* Take the mutex. The waiter is higher priority and should - * run until it waits for the condition. So, at this point - * signaler should be waiting for the condition. - */ - - status = pthread_mutex_lock(&mutex); - if (status != 0) - { - printf("thread_signaler: ERROR pthread_mutex_lock failed, status=%d\n", status); - signaler_nerrors++; - } - - /* Verify the state */ - - if (waiter_state != COND_WAIT) - { - printf("thread_signaler: ERROR waiter state = %d != COND_WAITING\n", waiter_state); - signaler_state++; - } - - if (data_available) - { - printf("thread_signaler: ERROR data already available, waiter_state=%d\n", waiter_state); - signaler_already++; - } - - /* Set data available and signal the waiter */ - - data_available = 1; - status = pthread_cond_signal(&cond); - if (status != 0) - { - printf("thread_signaler: ERROR pthread_cond_signal failed, status=%d\n", status); - signaler_nerrors++; - } - - /* Release the mutex */ - - status = pthread_mutex_unlock(&mutex); - if (status != 0) - { - printf("thread_signaler: ERROR pthread_mutex_unlock failed, status=%d\n", status); - signaler_nerrors++; - } - - signaler_nloops++; - } - - printf("thread_signaler: Terminating\n"); - pthread_exit(NULL); - return NULL; /* Non-reachable -- needed for some compilers */ -} - -void cond_test(void) -{ - pthread_t waiter; - pthread_t signaler; - pthread_attr_t attr; -#ifdef SDCC - pthread_addr_t result; -#endif - struct sched_param sparam; - int prio_min; - int prio_max; - int prio_mid; - int status; - - /* Initialize the mutex */ - - printf("cond_test: Initializing mutex\n"); - status = pthread_mutex_init(&mutex, NULL); - if (status != 0) - { - printf("cond_test: ERROR pthread_mutex_init failed, status=%d\n", status); - } - - /* Initialize the condition variable */ - - printf("cond_test: Initializing cond\n"); - status = pthread_cond_init(&cond, NULL); - if (status != 0) - { - printf("cond_test: ERROR pthread_condinit failed, status=%d\n", status); - } - - /* Start the waiter thread at higher priority */ - - printf("cond_test: Starting waiter\n"); - status = pthread_attr_init(&attr); - if (status != 0) - { - printf("cond_test: pthread_attr_init failed, status=%d\n", status); - } - - prio_min = sched_get_priority_min(SCHED_FIFO); - prio_max = sched_get_priority_max(SCHED_FIFO); - prio_mid = (prio_min + prio_max) / 2; - - sparam.sched_priority = prio_mid; - status = pthread_attr_setschedparam(&attr,&sparam); - if (status != OK) - { - printf("cond_test: pthread_attr_setschedparam failed, status=%d\n", status); - } - else - { - printf("cond_test: Set thread 1 priority to %d\n", sparam.sched_priority); - } - - status = pthread_create(&waiter, &attr, thread_waiter, NULL); - if (status != 0) - { - printf("cond_test: pthread_create failed, status=%d\n", status); - } - - printf("cond_test: Starting signaler\n"); - status = pthread_attr_init(&attr); - if (status != 0) - { - printf("cond_test: pthread_attr_init failed, status=%d\n", status); - } - - sparam.sched_priority = (prio_min + prio_mid) / 2; - status = pthread_attr_setschedparam(&attr,&sparam); - if (status != OK) - { - printf("cond_test: pthread_attr_setschedparam failed, status=%d\n", status); - } - else - { - printf("cond_test: Set thread 2 priority to %d\n", sparam.sched_priority); - } - - status = pthread_create(&signaler, &attr, thread_signaler, NULL); - if (status != 0) - { - printf("cond_test: pthread_create failed, status=%d\n", status); - } - - /* Wait for the threads to stop */ - -#ifdef SDCC - pthread_join(signaler, &result); -#else - pthread_join(signaler, NULL); -#endif - printf("cond_test: signaler terminated, now cancel the waiter\n"); - pthread_detach(waiter); - pthread_cancel(waiter); - - printf("cond_test: \tWaiter\tSignaler\n"); - printf("cond_test: Loops\t%d\t%d\n", waiter_nloops, signaler_nloops); - printf("cond_test: Errors\t%d\t%d\n", waiter_nerrors, signaler_nerrors); - printf("cond_test:\n"); - printf("cond_test: %d times, waiter did not have to wait for data\n", waiter_nloops - waiter_waits); - printf("cond_test: %d times, data was already available when the signaler run\n", signaler_already); - printf("cond_test: %d times, the waiter was in an unexpected state when the signaler ran\n", signaler_state); -} |