1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
51
52
53
54
55
56
57
58
59
60
61
62
63
64
65
66
67
68
69
70
71
72
73
74
75
76
77
78
79
80
81
82
83
84
85
86
87
88
89
90
91
92
93
94
95
96
97
98
99
100
101
102
103
104
105
106
107
108
109
110
111
112
113
114
115
116
117
118
119
120
121
122
123
124
125
126
127
128
129
130
131
132
133
134
135
136
137
138
139
140
141
142
143
144
145
146
147
148
149
150
151
152
153
154
155
156
157
158
159
160
161
162
163
164
165
166
167
168
169
170
171
172
173
174
175
176
177
178
179
180
181
182
183
184
185
186
187
188
189
190
191
192
193
194
195
196
197
198
199
200
201
202
203
204
205
206
207
208
209
210
211
212
213
214
215
216
217
218
219
220
221
222
223
224
225
226
227
228
229
230
231
232
233
234
235
236
237
238
239
240
241
242
243
244
245
246
247
248
249
250
251
252
253
254
255
256
257
258
259
260
261
262
263
264
265
266
267
268
269
270
271
272
273
274
|
/************************************************************************************
* arch/arm/src/lm3s/lm3s_memorymap.h
*
* Copyright (C) 2009-2010 Gregory Nutt. All rights reserved.
* Author: Gregory Nutt <spudmonkey@racsa.co.cr>
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions
* are met:
*
* 1. Redistributions of source code must retain the above copyright
* notice, this list of conditions and the following disclaimer.
* 2. Redistributions in binary form must reproduce the above copyright
* notice, this list of conditions and the following disclaimer in
* the documentation and/or other materials provided with the
* distribution.
* 3. Neither the name NuttX nor the names of its contributors may be
* used to endorse or promote products derived from this software
* without specific prior written permission.
*
* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
* "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
* LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
* FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE
* COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
* INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING,
* BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS
* OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED
* AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
* LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
* ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
* POSSIBILITY OF SUCH DAMAGE.
*
************************************************************************************/
#ifndef __ARCH_ARM_SRC_LM3S_LM3S_MEMORYMAP_H
#define __ARCH_ARM_SRC_LM3S_LM3S_MEMORYMAP_H
/************************************************************************************
* Included Files
************************************************************************************/
#include <nuttx/config.h>
/************************************************************************************
* Pre-processor Definitions
************************************************************************************/
/* Memory map ***********************************************************************/
#if defined(CONFIG_ARCH_CHIP_LM3S6918) || defined(CONFIG_ARCH_CHIP_LM3S6965)
# define LM3S_FLASH_BASE 0x00000000 /* -0x0003ffff: On-chip FLASH */
/* -0x1fffffff: Reserved */
# define LM3S_SRAM_BASE 0x20000000 /* -0x2000ffff: Bit-banded on-chip SRAM */
/* -0x21ffffff: Reserved */
# define LM3S_ASRAM_BASE 0x22000000 /* -0x221fffff: Bit-band alias of 20000000- */
/* -0x3fffffff: Reserved */
# define LM3S_PERIPH_BASE 0x40000000 /* -0x4001ffff: FiRM Peripherals */
/* -0x41ffffff: Peripherals */
# define LM3S_APERIPH_BASE 0x42000000 /* -0x43ffffff: Bit-band alise of 40000000- */
/* -0xdfffffff: Reserved */
# define LM3S_ITM_BASE 0xe0000000 /* -0xe0000fff: Instrumentation Trace Macrocell */
# define LM3S_DWT_BASE 0xe0001000 /* -0xe0001fff: Data Watchpoint and Trace */
# define LM3S_FPB_BASE 0xe0002000 /* -0xe0002fff: Flash Patch and Breakpoint */
/* -0xe000dfff: Reserved */
# define LM3S_NVIC_BASE 0xe000e000 /* -0xe000efff: Nested Vectored Interrupt Controller */
/* -0xe003ffff: Reserved */
# define LM3S_TPIU_BASE 0xe0040000 /* -0xe0040fff: Trace Port Interface Unit */
/* -0xffffffff: Reserved */
#elif defined(CONFIG_ARCH_CHIP_LM3S9B96)
# define LM3S_FLASH_BASE 0x00000000 /* -0x0003ffff: On-chip FLASH */
/* -0x1fffffff: Reserved */
# define LM3S_SRAM_BASE 0x20000000 /* -0x2000ffff: Bit-banded on-chip SRAM */
/* -0x21ffffff: Reserved */
# define LM3S_ASRAM_BASE 0x22000000 /* -0x221fffff: Bit-band alias of 20000000- */
/* -0x3fffffff: Reserved */
# define LM3S_PERIPH_BASE 0x40000000 /* -0x4001ffff: FiRM Peripherals */
/* -0x41ffffff: Peripherals */
# define LM3S_APERIPH_BASE 0x42000000 /* -0x43ffffff: Bit-band alise of 40000000- */
/* -0x5fffffff: Reserved */
# define LM3S_EPI0RAM_BASE 0x60000000 /* -0xDfffffff: EPI0 mapped peripheral and RAM */
# define LM3S_ITM_BASE 0xe0000000 /* -0xe0000fff: Instrumentation Trace Macrocell */
# define LM3S_DWT_BASE 0xe0001000 /* -0xe0001fff: Data Watchpoint and Trace */
# define LM3S_FPB_BASE 0xe0002000 /* -0xe0002fff: Flash Patch and Breakpoint */
/* -0xe000dfff: Reserved */
# define LM3S_NVIC_BASE 0xe000e000 /* -0xe000efff: Nested Vectored Interrupt Controller */
/* -0xe003ffff: Reserved */
# define LM3S_TPIU_BASE 0xe0040000 /* -0xe0040fff: Trace Port Interface Unit */
/* -0xffffffff: Reserved */
#else
# error "Memory map not specified for this LM3S chip"
#endif
/* Peripheral base addresses ********************************************************/
/* The LM3S6918 and LM3S6965 differ by only the presence or absence of a few differnt
* peripheral modules. They could probably be combined into one peripheral memory
* map. However, keeping them separate does also provide so early, compile-time
* error detection that makes the duplication worthwhile.
*/
#if defined(CONFIG_ARCH_CHIP_LM3S6918)
/* FiRM Peripheral Base Addresses */
# define LM3S_WDOG_BASE (LM3S_PERIPH_BASE + 0x00000) /* -0x00fff: Watchdog Timer */
/* -0x03fff: Reserved */
# define LM3S_GPIOA_BASE (LM3S_PERIPH_BASE + 0x04000) /* -0x04fff: GPIO Port A */
# define LM3S_GPIOB_BASE (LM3S_PERIPH_BASE + 0x05000) /* -0x05fff: GPIO Port B */
# define LM3S_GPIOC_BASE (LM3S_PERIPH_BASE + 0x06000) /* -0x06fff: GPIO Port C */
# define LM3S_GPIOD_BASE (LM3S_PERIPH_BASE + 0x07000) /* -0x07fff: GPIO Port D */
# define LM3S_SSI0_BASE (LM3S_PERIPH_BASE + 0x08000) /* -0x08fff: SSI0 */
# define LM3S_SSI1_BASE (LM3S_PERIPH_BASE + 0x09000) /* -0x09fff: SSI1 */
/* -0x0bfff: Reserved */
# define LM3S_UART0_BASE (LM3S_PERIPH_BASE + 0x0c000) /* -0x0cfff: UART0 */
# define LM3S_UART1_BASE (LM3S_PERIPH_BASE + 0x0d000) /* -0x0dfff: UART1 */
/* -0x1ffff: Reserved */
/* Peripheral Base Addresses */
# define LM3S_I2CM0_BASE (LM3S_PERIPH_BASE + 0x20000) /* -0x207ff: I2C Master 0 */
# define LM3S_I2CS0_BASE (LM3S_PERIPH_BASE + 0x20800) /* -0x20fff: I2C Slave 0 */
# define LM3S_I2CM1_BASE (LM3S_PERIPH_BASE + 0x21000) /* -0x217ff: I2C Master 1 */
# define LM3S_I2CS1_BASE (LM3S_PERIPH_BASE + 0x21800) /* -0x21fff: I2C Slave 1 */
/* -0x23fff: Reserved */
# define LM3S_GPIOE_BASE (LM3S_PERIPH_BASE + 0x24000) /* -0x24fff: GPIO Port E */
# define LM3S_GPIOF_BASE (LM3S_PERIPH_BASE + 0x25000) /* -0x25fff: GPIO Port F */
# define LM3S_GPIOG_BASE (LM3S_PERIPH_BASE + 0x26000) /* -0x26fff: GPIO Port G */
# define LM3S_GPIOH_BASE (LM3S_PERIPH_BASE + 0x27000) /* -0x27fff: GPIO Port H */
/* -0x2ffff: Reserved */
# define LM3S_TIMER0_BASE (LM3S_PERIPH_BASE + 0x30000) /* -0x30fff: Timer 0 */
# define LM3S_TIMER1_BASE (LM3S_PERIPH_BASE + 0x31000) /* -0x31fff: Timer 1 */
# define LM3S_TIMER2_BASE (LM3S_PERIPH_BASE + 0x32000) /* -0x32fff: Timer 2 */
# define LM3S_TIMER3_BASE (LM3S_PERIPH_BASE + 0x33000) /* -0x33fff: Timer 3 */
/* -0x37fff: Reserved */
# define LM3S_ADC_BASE (LM3S_PERIPH_BASE + 0x38000) /* -0x38fff: ADC */
/* -0x3bfff: Reserved */
# define LM3S_COMPARE_BASE (LM3S_PERIPH_BASE + 0x3c000) /* -0x3cfff: Analog Comparators */
/* -0x47fff: Reserved */
# define LM3S_ETHCON_BASE (LM3S_PERIPH_BASE + 0x48000) /* -0x48fff: Ethernet Controller */
/* -0xfcfff: Reserved */
# define LM3S_HIBERNATE_BASE (LM3S_PERIPH_BASE + 0xfc000) /* -0xfcfff: Ethernet Controller */
# define LM3S_FLASHCON_BASE (LM3S_PERIPH_BASE + 0xfd000) /* -0xfdfff: FLASH Control */
# define LM3S_SYSCON_BASE (LM3S_PERIPH_BASE + 0xfe000) /* -0xfefff: System Control */
/* -0x1ffffff: Reserved */
#elif defined(CONFIG_ARCH_CHIP_LM3S6965)
/* FiRM Peripheral Base Addresses */
# define LM3S_WDOG_BASE (LM3S_PERIPH_BASE + 0x00000) /* -0x00fff: Watchdog Timer */
/* -0x03fff: Reserved */
# define LM3S_GPIOA_BASE (LM3S_PERIPH_BASE + 0x04000) /* -0x04fff: GPIO Port A */
# define LM3S_GPIOB_BASE (LM3S_PERIPH_BASE + 0x05000) /* -0x05fff: GPIO Port B */
# define LM3S_GPIOC_BASE (LM3S_PERIPH_BASE + 0x06000) /* -0x06fff: GPIO Port C */
# define LM3S_GPIOD_BASE (LM3S_PERIPH_BASE + 0x07000) /* -0x07fff: GPIO Port D */
# define LM3S_SSI0_BASE (LM3S_PERIPH_BASE + 0x08000) /* -0x08fff: SSI0 */
/* -0x0bfff: Reserved */
# define LM3S_UART0_BASE (LM3S_PERIPH_BASE + 0x0c000) /* -0x0cfff: UART0 */
# define LM3S_UART1_BASE (LM3S_PERIPH_BASE + 0x0d000) /* -0x0dfff: UART1 */
# define LM3S_UART2_BASE (LM3S_PERIPH_BASE + 0x0e000) /* -0x0dfff: UART2 */
/* -0x1ffff: Reserved */
/* Peripheral Base Addresses */
# define LM3S_I2CM0_BASE (LM3S_PERIPH_BASE + 0x20000) /* -0x207ff: I2C Master 0 */
# define LM3S_I2CS0_BASE (LM3S_PERIPH_BASE + 0x20800) /* -0x20fff: I2C Slave 0 */
# define LM3S_I2CM1_BASE (LM3S_PERIPH_BASE + 0x21000) /* -0x217ff: I2C Master 1 */
# define LM3S_I2CS1_BASE (LM3S_PERIPH_BASE + 0x21800) /* -0x21fff: I2C Slave 1 */
/* -0x23fff: Reserved */
# define LM3S_GPIOE_BASE (LM3S_PERIPH_BASE + 0x24000) /* -0x24fff: GPIO Port E */
# define LM3S_GPIOF_BASE (LM3S_PERIPH_BASE + 0x25000) /* -0x25fff: GPIO Port F */
# define LM3S_GPIOG_BASE (LM3S_PERIPH_BASE + 0x26000) /* -0x26fff: GPIO Port G */
/* -0x27fff: Reserved */
# define LM3S_PWM0_BASE (LM3S_PERIPH_BASE + 0x28000) /* -0x28fff: PWM */
/* -0x2bfff: Reserved */
# define LM3S_QEI0_BASE (LM3S_PERIPH_BASE + 0x2c000) /* -0x2cfff: QEI0 */
# define LM3S_QEI1_BASE (LM3S_PERIPH_BASE + 0x2d000) /* -0x2dfff: QEI1 */
/* -0x2ffff: Reserved */
# define LM3S_TIMER0_BASE (LM3S_PERIPH_BASE + 0x30000) /* -0x30fff: Timer 0 */
# define LM3S_TIMER1_BASE (LM3S_PERIPH_BASE + 0x31000) /* -0x31fff: Timer 1 */
# define LM3S_TIMER2_BASE (LM3S_PERIPH_BASE + 0x32000) /* -0x32fff: Timer 2 */
# define LM3S_TIMER3_BASE (LM3S_PERIPH_BASE + 0x33000) /* -0x33fff: Timer 3 */
/* -0x37fff: Reserved */
# define LM3S_ADC_BASE (LM3S_PERIPH_BASE + 0x38000) /* -0x38fff: ADC */
/* -0x3bfff: Reserved */
# define LM3S_COMPARE_BASE (LM3S_PERIPH_BASE + 0x3c000) /* -0x3cfff: Analog Comparators */
/* -0x47fff: Reserved */
# define LM3S_ETHCON_BASE (LM3S_PERIPH_BASE + 0x48000) /* -0x48fff: Ethernet Controller */
/* -0xfcfff: Reserved */
# define LM3S_HIBERNATE_BASE (LM3S_PERIPH_BASE + 0xfc000) /* -0xfcfff: Ethernet Controller */
# define LM3S_FLASHCON_BASE (LM3S_PERIPH_BASE + 0xfd000) /* -0xfdfff: FLASH Control */
# define LM3S_SYSCON_BASE (LM3S_PERIPH_BASE + 0xfe000) /* -0xfefff: System Control */
/* -0x1ffffff: Reserved */
#elif defined(CONFIG_ARCH_CHIP_LM3S9B96)
/* FiRM Peripheral Base Addresses */
# define LM3S_WDOG_BASE (LM3S_PERIPH_BASE + 0x00000) /* -0x00fff: Watchdog Timer */
/* -0x03fff: Reserved */
# define LM3S_GPIOA_BASE (LM3S_PERIPH_BASE + 0x04000) /* -0x04fff: GPIO Port A */
# define LM3S_GPIOB_BASE (LM3S_PERIPH_BASE + 0x05000) /* -0x05fff: GPIO Port B */
# define LM3S_GPIOC_BASE (LM3S_PERIPH_BASE + 0x06000) /* -0x06fff: GPIO Port C */
# define LM3S_GPIOD_BASE (LM3S_PERIPH_BASE + 0x07000) /* -0x07fff: GPIO Port D */
# define LM3S_SSI0_BASE (LM3S_PERIPH_BASE + 0x08000) /* -0x08fff: SSI0 */
# define LM3S_SSI1_BASE (LM3S_PERIPH_BASE + 0x09000) /* -0x09fff: SSI0 */
/* -0x0bfff: Reserved */
# define LM3S_UART0_BASE (LM3S_PERIPH_BASE + 0x0c000) /* -0x0cfff: UART0 */
# define LM3S_UART1_BASE (LM3S_PERIPH_BASE + 0x0d000) /* -0x0dfff: UART1 */
# define LM3S_UART2_BASE (LM3S_PERIPH_BASE + 0x0e000) /* -0x0dfff: UART2 */
/* -0x1ffff: Reserved */
/* Peripheral Base Addresses */
# define LM3S_I2CM0_BASE (LM3S_PERIPH_BASE + 0x20000) /* -0x207ff: I2C Master 0 */
# define LM3S_I2CS0_BASE (LM3S_PERIPH_BASE + 0x20800) /* -0x20fff: I2C Slave 0 */
# define LM3S_I2CM1_BASE (LM3S_PERIPH_BASE + 0x21000) /* -0x217ff: I2C Master 1 */
# define LM3S_I2CS1_BASE (LM3S_PERIPH_BASE + 0x21800) /* -0x21fff: I2C Slave 1 */
/* -0x23fff: Reserved */
# define LM3S_GPIOE_BASE (LM3S_PERIPH_BASE + 0x24000) /* -0x24fff: GPIO Port E */
# define LM3S_GPIOF_BASE (LM3S_PERIPH_BASE + 0x25000) /* -0x25fff: GPIO Port F */
# define LM3S_GPIOG_BASE (LM3S_PERIPH_BASE + 0x26000) /* -0x26fff: GPIO Port G */
# define LM3S_GPIOH_BASE (LM3S_PERIPH_BASE + 0x27000) /* -0x27fff: GPIO Port H */
# define LM3S_PWM0_BASE (LM3S_PERIPH_BASE + 0x28000) /* -0x28fff: PWM */
/* -0x2bfff: Reserved */
# define LM3S_QEI0_BASE (LM3S_PERIPH_BASE + 0x2c000) /* -0x2cfff: QEI0 */
# define LM3S_QEI1_BASE (LM3S_PERIPH_BASE + 0x2d000) /* -0x2dfff: QEI1 */
/* -0x2ffff: Reserved */
# define LM3S_TIMER0_BASE (LM3S_PERIPH_BASE + 0x30000) /* -0x30fff: Timer 0 */
# define LM3S_TIMER1_BASE (LM3S_PERIPH_BASE + 0x31000) /* -0x31fff: Timer 1 */
# define LM3S_TIMER2_BASE (LM3S_PERIPH_BASE + 0x32000) /* -0x32fff: Timer 2 */
# define LM3S_TIMER3_BASE (LM3S_PERIPH_BASE + 0x33000) /* -0x33fff: Timer 3 */
/* -0x37fff: Reserved */
# define LM3S_ADC0_BASE (LM3S_PERIPH_BASE + 0x38000) /* -0x38fff: ADC 0 */
# define LM3S_ADC1_BASE (LM3S_PERIPH_BASE + 0x39000) /* -0x39fff: ADC 1 */
/* -0x3bfff: Reserved */
# define LM3S_COMPARE_BASE (LM3S_PERIPH_BASE + 0x3c000) /* -0x3cfff: Analog Comparators */
# define LM3S_GPIOJ_BASE (LM3S_PERIPH_BASE + 0x3d000) /* -0x3dfff: GPIO Port J */
/* -0x3ffff: Reserved */
# define LM3S_CAN0_BASE (LM3S_PERIPH_BASE + 0x40000) /* -0x40fff: CAN 0 */
# define LM3S_CAN1_BASE (LM3S_PERIPH_BASE + 0x41000) /* -0x41fff: CAN 1 */
/* -0x47fff: Reserved */
# define LM3S_ETHCON_BASE (LM3S_PERIPH_BASE + 0x48000) /* -0x48fff: Ethernet Controller */
/* -0x49fff: Reserved */
# define LM3S_USB_BASE (LM3S_PERIPH_BASE + 0x50000) /* -0x50fff: USB */
/* -0x53fff: Reserved */
# define LM3S_I2S0_BASE (LM3S_PERIPH_BASE + 0x54000) /* -0x54fff: I2S 0 */
/* -0x57fff: Reserved */
# define LM3S_GPIOAAHB_BASE (LM3S_PERIPH_BASE + 0x58000) /* -0x58fff: GPIO Port A (AHB aperture) */
# define LM3S_GPIOBAHB_BASE (LM3S_PERIPH_BASE + 0x59000) /* -0x59fff: GPIO Port B (AHB aperture) */
# define LM3S_GPIOCAHB_BASE (LM3S_PERIPH_BASE + 0x5A000) /* -0x5afff: GPIO Port C (AHB aperture) */
# define LM3S_GPIODAHB_BASE (LM3S_PERIPH_BASE + 0x5B000) /* -0x5bfff: GPIO Port D (AHB aperture) */
# define LM3S_GPIOEAHB_BASE (LM3S_PERIPH_BASE + 0x5C000) /* -0x5cfff: GPIO Port E (AHB aperture) */
# define LM3S_GPIOFAHB_BASE (LM3S_PERIPH_BASE + 0x5D000) /* -0x5dfff: GPIO Port F (AHB aperture) */
# define LM3S_GPIOGAHB_BASE (LM3S_PERIPH_BASE + 0x5E000) /* -0x5efff: GPIO Port G (AHB aperture) */
# define LM3S_GPIOHAHB_BASE (LM3S_PERIPH_BASE + 0x5F000) /* -0x5ffff: GPIO Port H (AHB aperture) */
# define LM3S_GPIOJAHB_BASE (LM3S_PERIPH_BASE + 0x60000) /* -0x60fff: GPIO Port J (AHB aperture) */
/* -0xcffff: Reserved */
# define LM3S_EPI0_BASE (LM3S_PERIPH_BASE + 0xD0000) /* -0xd0fff: EPI 0 */
/* -0xfcfff: Reserved */
# define LM3S_FLASHCON_BASE (LM3S_PERIPH_BASE + 0xfd000) /* -0xfdfff: FLASH Control */
# define LM3S_SYSCON_BASE (LM3S_PERIPH_BASE + 0xfe000) /* -0xfefff: System Control */
# define LM3S_UDMA_BASE (LM3S_PERIPH_BASE + 0xff000) /* -0xfffff: System Control */
/* -0x1ffffff: Reserved */
#else
# error "Peripheral base addresses not specified for this LM3S chip"
#endif
/************************************************************************************
* Public Types
************************************************************************************/
/************************************************************************************
* Public Data
************************************************************************************/
/************************************************************************************
* Public Function Prototypes
************************************************************************************/
#endif /* __ARCH_ARM_SRC_LM3S_LM3S_MEMORYMAP_H */
|