1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
51
52
53
54
55
56
57
58
59
60
61
62
63
64
65
66
67
68
69
70
71
72
73
74
75
76
77
78
79
80
81
82
83
84
85
86
87
88
89
90
91
92
93
94
95
96
97
98
99
100
101
102
103
104
105
106
107
108
109
110
111
112
113
114
115
116
117
118
119
120
121
122
123
124
125
126
127
128
129
130
131
132
133
134
135
136
137
138
139
140
141
142
143
144
145
146
147
148
149
150
151
152
153
154
155
156
157
158
159
160
161
162
163
164
165
166
167
168
169
170
171
172
173
174
175
176
177
178
179
180
181
182
183
184
185
186
187
188
189
190
191
192
193
194
195
196
197
198
199
200
201
202
203
204
205
206
207
208
209
210
211
212
213
214
215
216
217
218
219
220
221
222
223
224
225
226
227
228
229
230
231
232
233
234
235
236
237
238
239
240
241
242
243
244
245
246
247
248
249
250
251
252
253
254
255
256
257
258
259
260
261
262
263
264
265
266
267
268
269
270
|
/************************************************************************************************
* arch/arm/src/lpc313x/lpc313x_mci.h
*
* Copyright (C) 2009 Gregory Nutt. All rights reserved.
* Author: Gregory Nutt <spudmonkey@racsa.co.cr>
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions
* are met:
*
* 1. Redistributions of source code must retain the above copyright
* notice, this list of conditions and the following disclaimer.
* 2. Redistributions in binary form must reproduce the above copyright
* notice, this list of conditions and the following disclaimer in
* the documentation and/or other materials provided with the
* distribution.
* 3. Neither the name NuttX nor the names of its contributors may be
* used to endorse or promote products derived from this software
* without specific prior written permission.
*
* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
* "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
* LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
* FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE
* COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
* INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING,
* BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS
* OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED
* AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
* LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
* ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
* POSSIBILITY OF SUCH DAMAGE.
*
************************************************************************************************/
#ifndef __ARCH_ARM_SRC_LPC313X_MCI_H
#define __ARCH_ARM_SRC_LPC313X_MCI_H
/************************************************************************************************
* Included Files
************************************************************************************************/
#include <nuttx/config.h>
#include "lpc313x_memorymap.h"
/************************************************************************************************
* Pre-processor Definitions
************************************************************************************************/
/* MCI register base address offset into the MCI domain *****************************************/
#define LPC313X_MCI_VBASE (LPC313X_MCI_VSECTION)
#define LPC313X_MCI_PBASE (LPC313X_MCI_PSECTION)
/* MCI register offsets (with respect to the MCI base) ******************************************/
#define LPC313X_MCI_CTRL_OFFSET 0x000 /* Control register */
#define LPC313X_MCI_PWREN_OFFSET 0x004 /* Reserved */
#define LPC313X_MCI_CLKDIV_OFFSET 0x008 /* Clock-divider register */
#define LPC313X_MCI_CLKSRC_OFFSET 0x00c /* Clock-source register */
#define LPC313X_MCI_CLKENA_OFFSET 0x010 /* Clock-enable register */
#define LPC313X_MCI_TMOUT_OFFSET 0x014 /* Time-out register */
#define LPC313X_MCI_CTYPE_OFFSET 0x018 /* Card-type register */
#define LPC313X_MCI_BLKSIZ_OFFSET 0x01c /* Block-size register */
#define LPC313X_MCI_BYTCNT_OFFSET 0x020 /* Byte-count register */
#define LPC313X_MCI_INTMASK_OFFSET 0x024 /* Interrupt-mask register */
#define LPC313X_MCI_CMDARG_OFFSET 0x028 /* Command-argument register */
#define LPC313X_MCI_CMD_OFFSET 0x02c /* Command register */
#define LPC313X_MCI_RESP0_OFFSET 0x030 /* Response-0 register */
#define LPC313X_MCI_RESP1_OFFSET 0x034 /* Response-1register */
#define LPC313X_MCI_RESP2_OFFSET 0x038 /* Response-2 register */
#define LPC313X_MCI_RESP3_OFFSET 0x03c /* Response-3 register */
#define LPC313X_MCI_MINTSTS_OFFSET 0x040 /* Masked interrupt-status register */
#define LPC313X_MCI_RINTSTS_OFFSET 0x044 /* Raw interrupt-status register */
#define LPC313X_MCI_STATUS_OFFSET 0x048 /* Status register */
#define LPC313X_MCI_FIFOTH_OFFSET 0x04c /* FIFO threshold register */
#define LPC313X_MCI_CDETECT_OFFSET 0x050 /* Card-detect register value */
#define LPC313X_MCI_WRTPRT_OFFSET 0x054 /* Write-protect register */
/* 0x58: Reserved */
#define LPC313X_MCI_TCBCNT_OFFSET 0x05c /* Transferred CIU card byte count */
#define LPC313X_MCI_TBBCNT_OFFSET 0x060 /* Transferred cpu/DMA to/from BIU-FIFO byte count */
/* 0x064-0x0ff: Reserved */
#define LPC313X_MCI_DATA_OFFSET 0x100 /* Data FIFO read/write (>=) */
/* MCI register (virtual) addresses *************************************************************/
#define LPC313X_MCI_CTRL (LPC313X_MCI_VBASE+LPC313X_MCI_CTRL_OFFSET)
#define LPC313X_MCI_PWREN (LPC313X_MCI_VBASE+LPC313X_MCI_PWREN_OFFSET)
#define LPC313X_MCI_CLKDIV (LPC313X_MCI_VBASE+LPC313X_MCI_CLKDIV_OFFSET)
#define LPC313X_MCI_CLKSRC (LPC313X_MCI_VBASE+LPC313X_MCI_CLKSRC_OFFSET)
#define LPC313X_MCI_CLKENA (LPC313X_MCI_VBASE+LPC313X_MCI_CLKENA_OFFSET)
#define LPC313X_MCI_TMOUT (LPC313X_MCI_VBASE+LPC313X_MCI_TMOUT_OFFSET)
#define LPC313X_MCI_CTYPE (LPC313X_MCI_VBASE+LPC313X_MCI_CTYPE_OFFSET)
#define LPC313X_MCI_BLKSIZ (LPC313X_MCI_VBASE+LPC313X_MCI_BLKSIZ_OFFSET)
#define LPC313X_MCI_BYTCNT (LPC313X_MCI_VBASE+LPC313X_MCI_BYTCNT_OFFSET)
#define LPC313X_MCI_INTMASK (LPC313X_MCI_VBASE+LPC313X_MCI_INTMASK_OFFSET)
#define LPC313X_MCI_CMDARG (LPC313X_MCI_VBASE+LPC313X_MCI_CMDARG_OFFSET)
#define LPC313X_MCI_CMD (LPC313X_MCI_VBASE+LPC313X_MCI_CMD_OFFSET)
#define LPC313X_MCI_RESP0 (LPC313X_MCI_VBASE+LPC313X_MCI_RESP0_OFFSET)
#define LPC313X_MCI_RESP1 (LPC313X_MCI_VBASE+LPC313X_MCI_RESP1_OFFSET)
#define LPC313X_MCI_RESP2 (LPC313X_MCI_VBASE+LPC313X_MCI_RESP2_OFFSET)
#define LPC313X_MCI_RESP3 (LPC313X_MCI_VBASE+LPC313X_MCI_RESP3_OFFSET)
#define LPC313X_MCI_MINTSTS (LPC313X_MCI_VBASE+LPC313X_MCI_MINTSTS_OFFSET)
#define LPC313X_MCI_RINTSTS (LPC313X_MCI_VBASE+LPC313X_MCI_RINTSTS_OFFSET)
#define LPC313X_MCI_STATUS (LPC313X_MCI_VBASE+LPC313X_MCI_STATUS_OFFSET)
#define LPC313X_MCI_FIFOTH (LPC313X_MCI_VBASE+LPC313X_MCI_FIFOTH_OFFSET)
#define LPC313X_MCI_CDETECT (LPC313X_MCI_VBASE+LPC313X_MCI_CDETECT_OFFSET)
#define LPC313X_MCI_WRTPRT (LPC313X_MCI_VBASE+LPC313X_MCI_WRTPRT_OFFSET)
#define LPC313X_MCI_TCBCNT (LPC313X_MCI_VBASE+LPC313X_MCI_TCBCNT_OFFSET)
#define LPC313X_MCI_TBBCNT (LPC313X_MCI_VBASE+LPC313X_MCI_TBBCNT_OFFSET)
#define LPC313X_MCI_DATA (LPC313X_MCI_VBASE+LPC313X_MCI_DATA_OFFSET)
/* MCI register bit definitions *****************************************************************/
/* Control register CTRL, address 0x18000000 */
#define MCI_CTRL_CEATAINT (1 << 11) /* Bit 11: CE-ATA device interrupts enabled */
#define MCI_CTRL_AUTOSTOP (1 << 10) /* Bit 10: Send STOP after CCSD to CE-ATA device */
#define MCI_CTRL_SENDCCSD (1 << 9) /* Bit 9: Send CCSD to CE-ATA device */
#define MCI_CTRL_ABORTREAD (1 << 8) /* Bit 8: Reset data state-machine (suspend sequence) */
#define MCI_CTRL_SENDIRQRESP (1 << 7) /* Bit 7: Send auto IRQ response */
#define MCI_CTRL_READWAIT (1 << 6) /* Bit 6: Assert read wait */
#define MCI_CTRL_DMAENABLE (1 << 5) /* Bit 5: Enable DMA transfer mode */
#define MCI_CTRL_INTENABLE (1 << 4) /* Bit 4: Enable interrupts */
#define MCI_CTRL_DMARESET (1 << 2) /* Bit 2: Reset internal DMA interface control logic */
#define MCI_CTRL_FIFORESET (1 << 1) /* Bit 1: Reset to data FIFO To reset FIFO pointers */
#define MCI_CTRL_CNTLRRESET (1 << 0) /* Bit 0: Reset Module controller */
/* Clock divider register CLKDIV, address 0x18000008 */
#define MCI_CLKDIV_SHIFT (0) /* Bits 0-7: Clock divider */
#define MCI_CLKDIV_MASK (255 << MCI_CLKDIV_SHIFT)
/* Clock source register CLKSRC, address 0x1800000c */
#define MCI_CLKSRC_SHIFT (0) /* Bits 0-1: Must be zero */
#define MCI_CLKSRC_MASK (3 << MCI_CLKSRC_SHIFT)
/* Clock enable register CLKENA, address 0x18000010 */
#define MCI_CLKENA_LOWPOWER (1 << 16) /* Bit 16: Low-power mode */
#define MCI_CLKENA_EMABLE (1 << 0) /* Bit 0: Clock enable */
/*Timeout register TMOUT, address 0x18000014 */
#define MCI_TMOUT_DATA_SHIFT (8) /* Bits 8-31: Data Read Timeout value */
#define MCI_TMOUT_DATA_MASK (0x00ffffff << MCI_TMOUT_DATA_SHIFT)
#define MCI_TMOUT_RESPONSE_SHIFT (0) /* Bits 0-7: Response timeout value */
#define MCI_TMOUT_RESPONSE_MASK (255 << MCI_TMOUT_RESPONSE_SHIFT)
/* Card type register CTYPE, address 0x18000018 */
#define MCI_CTYPE_WIDTH8 (1 << 16) /* Bit 16: 8-bit mode */
#define MCI_CTYPE_WIDTH4 (1 << 0) /* Bit 0: 4-bit mode */
/* Blocksize register BLKSIZ, address 0x1800001c */
#define MCI_BLKSIZ_SHIFT (0) /* Bits 0-15: Block size */
#define MCI_BLKSIZ_MASK (0xffff << MCI_BLKSIZ_SHIFT)
/* Interrupt mask register INTMASK, address 0x18000024
* Masked interrupt status register MINTSTS, address 0x18000040
* Raw interrupt status register RINTSTS, address 0x18000044
*/
#define MCI_INT_SDIO (1 << 16) /* Bit 16: Mask SDIO interrupt */
#define MCI_INT_EBE (1 << 15) /* Bit 15: End-bit error (read)/Write no CRC */
#define MCI_INT_ACD (1 << 14) /* Bit 14: Auto command done */
#define MCI_INT_SBE (1 << 13) /* Bit 13: Start-bit error */
#define MCI_INT_HLE (1 << 12) /* Bit 12: Hardware locked write error */
#define MCI_INT_FRUN (1 << 11) /* Bit 11: FIFO underrun/overrun error */
#define MCI_INT_HTO (1 << 10) /* Bit 10: Data starvation-by-cpu timeout */
#define MCI_INT_DRTO (1 << 9) /* Bit 9: Data read timeout */
#define MCI_INT_RTO (1 << 8) /* Bit 8: Response timeout */
#define MCI_INT_DCRC (1 << 7) /* Bit 7: Data CRC error */
#define MCI_INT_RCRC (1 << 6) /* Bit 6: Response CRC error */
#define MCI_INT_RXDR (1 << 5) /* Bit 5: Receive FIFO data request */
#define MCI_INT_TXDR (1 << 4) /* Bit 4: Transmit FIFO data request */
#define MCI_INT_DTO (1 << 3) /* Bit 3: Data transfer over */
#define MCI_INT_CD (1 << 2) /* Bit 2: Command done */
#define MCI_INT_RE (1 << 1) /* Bit 1: Response error */
#define MCI_INT_CD (1 << 0) /* Bit 0: Card detect */
#define MCI_INT_ALL (0x1ffff)
/* Command register CMD, address 0x1800002c */
#define MCI_CMD_STARTCMD (1 << 31) /* Bit 31: Start command */
#define MCI_CMD_CCSEXPTD (1 << 23) /* Bit 23: Expect command completion from CE-ATA device */
#define MCI_CMD_READCEATA (1 << 22) /* Bit 22: Performing read access on CE-ATA device */
#define MCI_CMD_UPDCLOCK (1 << 21) /* Bit 21: Update clock register value (no command) */
#define MCI_CMD_SENDINIT (1 << 15) /* Bit 15: Send initialization sequence before command */
#define MCI_CMD_STOPABORT (1 << 14) /* Bit 14: Stop current data transfer */
#define MCI_CMD_WAITPREV (1 << 13) /* Bit 13: Wait previous transfer complete before sending */
#define MCI_CMD_AUTOSTOP (1 << 12) /* Bit 12: Send stop command at end of data transfer */
#define MCI_CMD_XFRMODE (1 << 11) /* Bit 11: Stream data transfer command */
#define MCI_CMD_WRITE (1 << 10) /* Bit 10: Write to card */
#define MCI_CMD_DATAXFREXPTD (1 << 9) /* Bit 9: Data transfer expected (read/write) */
#define MCI_CMD_RESPCRC (1 << 8) /* Bit 8: Check response CRC */
#define MCI_CMD_LONGRESP (1 << 7) /* Bit 7: Long response expected from card */
#define MCI_CMD_RESPONSE (1 << 6) /* Bit 6: Response expected from card */
#define MCI_CMD_CMDINDEX_SHIFT (0) /* Bits 0-5: 5:0 Command index */
#define MCI_CMD_CMDINDEX_MASK (63 << MCI_CMD_CMDINDEX_SHIFT)
/* Status register STATUS, address 0x18000048 */
#define MCI_STATUS_DMAREQ (1 << 31) /* Bit 31: DMA request signal state */
#define MCI_STATUS_DMAACK (1 << 30) /* Bit 30: DMA acknowledge signal state */
#define MCI_STATUS_FIFOCOUNT_SHIFT (17) /* Bits 17-29: FIFO count */
#define MCI_STATUS_FIFOCOUNT_MASK (0x1fff << MCI_STATUS_FIFOCOUNT_SHIFT)
#define MCI_STATUS_RESPINDEX_SHIFT (11) /* Bits 11-16: Index of previous response */
#define MCI_STATUS_RESPINDEX_MASK (63 << MCI_STATUS_RESPINDEX_SHIFT)
#define MCI_STATUS_MCBUSY (1 << 10) /* Bit 10: Data transmit/receive state machine busy */
#define MCI_STATUS_DATABUSY (1 << 9) /* Bit 9: Card data busy */
#define MCI_STATUS_DAT3 (1 << 8) /* Bit 8: DAT3=1: Card present */
#define MCI_STATUS_FSMSTATE_SHIFT (4) /* Bits 4-7: 7:4 Command FSM states */
#define MCI_STATUS_FSMSTATE_MASK (15 << MCI_STATUS_FSMSTATE_SHIFT)
# define MCI_STATUS_FSMSTATE_IDLE (0 << MCI_STATUS_FSMSTATE_SHIFT) /* Idle */
# define MCI_STATUS_FSMSTATE_INIT (1 << MCI_STATUS_FSMSTATE_SHIFT) /* Send init sequence */
# define MCI_STATUS_FSMSTATE_TXSTART (2 << MCI_STATUS_FSMSTATE_SHIFT) /* Tx cmd start bit */
# define MCI_STATUS_FSMSTATE_TXTXBIT (3 << MCI_STATUS_FSMSTATE_SHIFT) /* Tx cmd tx bit */
# define MCI_STATUS_FSMSTATE_TXCMDARG (4 << MCI_STATUS_FSMSTATE_SHIFT) /* Tx cmd index + arg */
# define MCI_STATUS_FSMSTATE_TXCMDCRC (5 << MCI_STATUS_FSMSTATE_SHIFT) /* Tx cmd crc7 */
# define MCI_STATUS_FSMSTATE_TXEND (6 << MCI_STATUS_FSMSTATE_SHIFT) /* Tx cmd end bit */
# define MCI_STATUS_FSMSTATE_RXSTART (7 << MCI_STATUS_FSMSTATE_SHIFT) /* Rx resp start bit */
# define MCI_STATUS_FSMSTATE_RXIRQ (8 << MCI_STATUS_FSMSTATE_SHIFT) /* Rx resp IRQ response */
# define MCI_STATUS_FSMSTATE_RXTXBIT (9 << MCI_STATUS_FSMSTATE_SHIFT) /* Rx resp tx bit */
# define MCI_STATUS_FSMSTATE_RXCMD (10 << MCI_STATUS_FSMSTATE_SHIFT) /* Rx resp cmd idx */
# define MCI_STATUS_FSMSTATE_RXRESP (11 << MCI_STATUS_FSMSTATE_SHIFT) /* Rx resp data */
# define MCI_STATUS_FSMSTATE_RXRESPCRC (12 << MCI_STATUS_FSMSTATE_SHIFT) /* Rx resp crc7 */
# define MCI_STATUS_FSMSTATE_RXEND (13 << MCI_STATUS_FSMSTATE_SHIFT) /* Rx resp end bit */
# define MCI_STATUS_FSMSTATE_WAITNCC (14 << MCI_STATUS_FSMSTATE_SHIFT) /* Cmd path wait NCC */
# define MCI_STATUS_FSMSTATE_WAITTURN (15 << MCI_STATUS_FSMSTATE_SHIFT) /* Wait; CMD-to-response turnaround */
#define MCI_STATUS_FIFOFULL (1 << 3) /* Bit 3: FIFO is full */
#define MCI_STATUS_FIFOEMPTY (1 << 2) /* Bit 2: FIFO is empty */
#define MCI_STATUS_TXWMARK (1 << 1) /* Bit 1: FIFO reached Transmit watermark level */
#define MCI_STATUS_RXWMARK (1 << 0) /* Bit 0: FIFO reached Receive watermark level */
/* FIFO threshold register FIFOTH, address 0x1800004c */
#define MCI_FIFOTH_DMABURST_SHIFT (28) /* Bits 28-30: Burst size for multiple transaction */
#define MCI_FIFOTH_DMABURST_MASK (7 << MCI_FIFOTH_DMABURST_SHIFT)
define MCI_FIFOTH_DMABURST_1XFR (0 << MCI_FIFOTH_DMABURST_SHIFT) /* 1 transfer */
# define MCI_FIFOTH_DMABURST_4XFRS (1 << MCI_FIFOTH_DMABURST_SHIFT) /* 4 transfers */
# define MCI_FIFOTH_DMABURST_8XFRS (2 << MCI_FIFOTH_DMABURST_SHIFT) /* 8 transfers */
#define MCI_FIFOTH_RXWMARK_SHIFT (16) /* Bits 16-27: FIFO threshold level when receiving */
#define MCI_FIFOTH_RXWMARK_MASK (0xfff << MCI_FIFOTH_RXWMARK_SHIFT)
#define MCI_FIFOTH_TXWMARK_SHIFT (0) /* Bits 0-11: FIFO threshold level when transmitting */
#define MCI_FIFOTH_TXWMARK_MASK (0xfff << MCI_FIFOTH_TXWMARK_SHIFT)
/* Card detect register CDETECT, address 0x18000050 */
#define MCI_CDETECT_NOTPRESENT (1 << 0)
/* Write protect register WRTPRT, address 0x18000054 */
#define MCI_WRTPRT_PROTECTED (1 << 0)
/************************************************************************************************
* Public Types
************************************************************************************************/
/************************************************************************************************
* Public Data
************************************************************************************************/
/************************************************************************************************
* Public Functions
************************************************************************************************/
#endif /* __ARCH_ARM_SRC_LPC313X_MCI_H */
|