1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
51
52
53
54
55
56
57
58
59
60
61
62
63
64
65
66
67
68
69
70
71
72
73
74
75
76
77
78
79
80
81
82
83
84
85
86
87
88
89
90
91
92
93
94
95
96
97
98
99
100
101
102
103
104
105
106
107
108
109
110
111
112
113
114
115
116
117
118
119
120
121
122
123
124
125
126
127
128
129
130
131
132
133
134
135
136
137
138
139
140
141
142
143
144
145
146
147
148
149
150
151
152
153
154
155
156
157
158
159
160
161
162
163
164
165
166
167
168
169
170
171
172
173
174
175
176
177
178
179
180
181
182
183
184
185
186
187
188
189
190
191
192
193
194
195
196
197
198
199
200
201
202
203
204
205
206
207
208
209
210
211
212
213
214
215
216
217
218
219
220
221
222
223
224
225
226
227
228
229
230
231
232
233
234
235
236
237
238
239
240
241
242
243
244
245
246
247
248
249
250
251
252
253
254
255
256
257
258
259
260
261
262
263
264
265
266
267
268
269
270
271
272
273
274
275
276
277
278
279
280
281
282
283
284
285
286
287
288
289
290
291
292
293
294
295
296
297
298
299
300
301
302
303
304
305
306
307
308
309
310
311
312
313
314
315
316
317
318
319
320
321
322
323
324
325
326
327
328
329
330
331
332
333
334
335
336
337
338
339
340
341
342
343
344
345
346
347
348
349
350
351
352
353
354
355
356
357
358
359
360
361
362
363
364
365
366
367
368
369
370
371
372
373
374
375
376
377
378
379
380
381
382
383
384
385
386
387
388
389
390
391
392
393
394
395
396
397
398
399
400
401
402
403
404
405
406
407
408
409
410
411
412
413
414
415
416
417
418
419
420
421
422
423
424
425
426
427
428
429
430
431
432
433
434
435
436
437
438
439
440
441
442
443
444
445
446
447
448
449
450
451
452
453
454
455
456
457
458
459
460
461
462
463
464
465
466
467
468
469
470
471
472
473
474
475
476
477
478
479
480
481
482
483
484
485
486
487
488
489
490
491
492
493
494
495
496
497
498
499
500
501
502
503
504
505
506
507
508
509
510
511
512
513
514
515
516
517
518
519
520
521
522
523
524
525
526
527
528
529
530
531
532
533
534
535
536
537
538
539
540
541
542
543
544
545
546
547
548
549
550
551
552
553
554
555
556
557
558
559
560
561
562
563
564
565
566
567
568
569
570
571
572
573
574
575
576
577
578
579
580
581
582
583
584
585
586
587
588
589
590
591
592
593
594
595
596
597
598
599
600
601
602
603
604
605
606
607
608
609
610
611
612
613
614
615
616
617
618
619
620
621
622
623
624
625
626
627
628
629
630
631
632
633
634
635
636
637
638
639
640
641
642
643
644
645
646
647
648
649
650
651
652
653
654
655
656
657
658
659
660
661
662
663
664
665
666
667
668
669
670
671
672
673
674
675
676
677
678
679
680
681
682
683
684
685
686
687
688
689
690
691
692
693
694
695
696
697
698
699
700
701
702
703
704
705
706
707
708
709
710
711
712
713
714
715
716
717
718
719
720
721
722
723
724
725
726
727
728
729
730
731
732
733
734
735
736
737
738
739
740
741
742
743
744
745
746
747
748
749
750
751
752
753
754
755
756
757
758
759
760
761
762
763
764
765
766
767
768
769
770
771
772
773
774
775
776
777
778
779
780
781
782
783
784
785
786
787
788
789
790
791
792
793
794
795
796
797
798
799
800
801
802
803
804
805
806
807
808
809
810
811
812
813
814
815
816
817
818
819
820
821
822
823
824
825
826
827
828
829
830
831
832
833
834
835
836
837
838
839
840
841
842
843
844
845
846
847
848
849
850
851
852
853
854
855
856
857
858
859
860
861
862
863
864
865
866
867
868
869
870
871
872
873
874
875
876
877
878
879
880
881
882
883
884
885
886
887
888
889
890
891
892
893
894
895
896
897
898
899
900
901
902
903
904
905
906
907
908
909
910
911
912
913
914
915
916
917
918
919
920
921
922
923
924
925
926
927
928
929
930
931
932
933
934
935
936
937
938
939
940
941
942
943
944
945
946
947
948
949
950
951
952
953
954
955
956
957
958
959
960
961
962
963
964
965
966
967
968
969
970
971
972
973
974
975
976
977
978
979
980
981
982
983
984
985
986
987
988
989
990
991
992
993
994
995
996
997
998
999
1000
1001
1002
1003
1004
1005
1006
1007
1008
1009
1010
1011
1012
1013
1014
1015
1016
1017
1018
1019
1020
1021
1022
1023
1024
1025
1026
1027
1028
1029
1030
1031
1032
1033
1034
1035
1036
1037
1038
1039
1040
1041
1042
1043
1044
1045
1046
1047
1048
1049
1050
1051
1052
1053
1054
1055
1056
1057
1058
1059
1060
1061
1062
1063
1064
1065
1066
1067
1068
1069
1070
1071
1072
1073
1074
1075
1076
1077
1078
1079
1080
1081
1082
1083
1084
1085
1086
1087
1088
1089
1090
1091
1092
1093
1094
1095
1096
1097
1098
1099
1100
1101
1102
1103
1104
1105
1106
1107
1108
1109
1110
1111
1112
1113
1114
1115
1116
1117
1118
1119
1120
1121
1122
1123
1124
1125
1126
1127
1128
1129
1130
1131
1132
1133
1134
1135
1136
1137
1138
1139
1140
1141
1142
1143
1144
1145
1146
1147
1148
1149
1150
1151
1152
1153
1154
1155
1156
1157
1158
1159
1160
1161
1162
1163
1164
1165
1166
1167
1168
1169
1170
1171
1172
1173
1174
1175
1176
1177
1178
1179
1180
1181
1182
1183
1184
1185
1186
1187
1188
1189
1190
1191
1192
1193
1194
1195
1196
1197
1198
1199
1200
1201
1202
1203
1204
1205
1206
1207
1208
1209
1210
1211
1212
1213
1214
1215
1216
1217
1218
1219
1220
1221
1222
1223
1224
1225
1226
1227
1228
1229
1230
1231
1232
1233
1234
1235
1236
1237
1238
1239
1240
1241
1242
1243
1244
1245
1246
1247
1248
1249
1250
1251
1252
1253
1254
1255
1256
1257
1258
1259
1260
1261
1262
1263
1264
1265
1266
1267
1268
1269
1270
1271
1272
1273
1274
1275
1276
1277
1278
1279
1280
1281
1282
1283
1284
1285
1286
1287
1288
1289
1290
1291
1292
1293
1294
1295
1296
1297
1298
1299
1300
1301
1302
1303
1304
1305
1306
1307
1308
1309
1310
1311
1312
1313
1314
1315
1316
1317
1318
1319
1320
1321
1322
1323
1324
1325
1326
1327
1328
1329
1330
1331
1332
1333
1334
1335
1336
1337
1338
1339
1340
1341
1342
1343
1344
1345
1346
1347
1348
1349
1350
1351
1352
1353
1354
1355
1356
1357
1358
1359
1360
1361
1362
1363
1364
1365
1366
1367
1368
1369
1370
1371
1372
1373
1374
1375
1376
1377
1378
1379
1380
1381
1382
1383
1384
1385
1386
1387
1388
1389
1390
1391
1392
1393
1394
1395
1396
1397
1398
1399
1400
1401
1402
1403
1404
1405
1406
1407
1408
1409
1410
1411
1412
1413
1414
1415
1416
1417
1418
1419
1420
1421
1422
1423
1424
1425
1426
1427
1428
1429
1430
1431
1432
1433
1434
1435
1436
1437
1438
1439
1440
1441
1442
1443
1444
1445
1446
1447
1448
1449
1450
1451
1452
1453
1454
1455
1456
1457
1458
1459
1460
1461
1462
1463
1464
1465
1466
1467
1468
1469
1470
1471
1472
1473
1474
1475
1476
1477
1478
1479
1480
1481
1482
1483
1484
1485
1486
1487
1488
1489
1490
1491
1492
1493
1494
1495
1496
1497
1498
1499
1500
1501
1502
1503
1504
1505
1506
1507
1508
1509
1510
1511
1512
1513
1514
1515
1516
1517
1518
1519
1520
1521
1522
1523
1524
1525
1526
1527
1528
1529
1530
1531
1532
1533
1534
1535
1536
1537
1538
1539
1540
1541
1542
1543
1544
1545
1546
1547
1548
1549
1550
1551
1552
1553
1554
1555
1556
1557
1558
1559
1560
1561
1562
1563
1564
1565
1566
1567
1568
1569
1570
1571
1572
1573
1574
1575
1576
1577
1578
1579
1580
1581
1582
1583
1584
1585
1586
1587
1588
1589
1590
1591
1592
1593
1594
1595
1596
1597
1598
1599
1600
1601
1602
1603
1604
1605
1606
1607
1608
1609
1610
1611
1612
1613
1614
1615
1616
1617
1618
1619
1620
1621
1622
1623
1624
1625
1626
1627
1628
1629
1630
1631
1632
1633
1634
1635
1636
1637
1638
1639
1640
1641
1642
1643
1644
1645
1646
1647
1648
1649
1650
1651
1652
1653
1654
1655
1656
1657
1658
1659
1660
1661
1662
1663
1664
1665
1666
1667
1668
1669
1670
1671
1672
1673
1674
1675
1676
1677
1678
1679
1680
1681
1682
1683
1684
1685
1686
1687
1688
1689
1690
1691
1692
1693
1694
1695
1696
1697
1698
1699
1700
1701
1702
1703
1704
1705
1706
1707
1708
1709
1710
1711
1712
1713
1714
1715
1716
1717
1718
1719
1720
1721
1722
1723
1724
1725
1726
1727
1728
1729
1730
1731
1732
1733
1734
1735
1736
1737
1738
1739
1740
1741
1742
1743
1744
1745
1746
1747
1748
1749
1750
1751
1752
1753
1754
1755
1756
1757
1758
1759
1760
1761
1762
1763
1764
1765
1766
1767
1768
1769
1770
1771
1772
1773
1774
1775
1776
1777
1778
1779
1780
1781
1782
1783
1784
1785
1786
1787
1788
1789
1790
1791
1792
1793
1794
1795
1796
1797
1798
1799
1800
1801
1802
1803
1804
1805
1806
1807
1808
1809
1810
1811
1812
1813
1814
1815
1816
1817
1818
1819
1820
1821
1822
1823
1824
1825
1826
1827
1828
1829
1830
1831
1832
1833
1834
1835
1836
1837
1838
1839
1840
1841
1842
1843
1844
1845
1846
1847
1848
1849
1850
1851
1852
1853
1854
1855
1856
1857
1858
1859
1860
1861
1862
1863
1864
1865
1866
1867
1868
1869
1870
1871
1872
1873
1874
1875
1876
1877
1878
1879
1880
1881
1882
1883
1884
1885
1886
1887
1888
1889
1890
1891
1892
1893
1894
1895
1896
1897
1898
1899
1900
1901
1902
1903
1904
1905
1906
1907
1908
1909
1910
1911
1912
1913
1914
1915
1916
1917
1918
1919
1920
1921
1922
1923
1924
1925
1926
1927
1928
1929
1930
1931
1932
1933
1934
1935
1936
1937
1938
1939
1940
1941
1942
1943
1944
1945
1946
1947
1948
1949
1950
1951
1952
1953
1954
1955
1956
1957
1958
1959
1960
1961
1962
1963
1964
1965
1966
1967
1968
1969
1970
1971
1972
1973
1974
1975
1976
1977
1978
1979
1980
1981
1982
1983
1984
1985
1986
1987
1988
1989
1990
1991
1992
1993
1994
1995
1996
1997
1998
1999
2000
2001
2002
2003
2004
2005
2006
2007
2008
2009
2010
2011
2012
2013
2014
2015
2016
2017
2018
2019
2020
2021
2022
2023
2024
2025
2026
2027
2028
2029
2030
2031
2032
2033
2034
2035
2036
2037
2038
2039
2040
2041
2042
2043
2044
2045
2046
2047
2048
2049
2050
2051
2052
2053
2054
2055
2056
2057
2058
2059
2060
2061
2062
2063
2064
2065
2066
2067
2068
2069
2070
2071
2072
2073
2074
2075
2076
2077
2078
2079
2080
2081
2082
2083
2084
2085
2086
2087
2088
2089
2090
2091
2092
2093
2094
2095
2096
2097
2098
2099
2100
2101
2102
2103
2104
2105
2106
2107
2108
2109
2110
2111
2112
2113
2114
2115
2116
2117
2118
2119
2120
2121
2122
2123
2124
2125
2126
2127
2128
2129
2130
2131
2132
2133
2134
2135
2136
2137
2138
2139
2140
2141
2142
2143
2144
2145
2146
2147
2148
2149
2150
2151
2152
2153
2154
2155
2156
2157
2158
2159
2160
2161
2162
2163
2164
2165
2166
2167
2168
2169
2170
2171
2172
2173
2174
2175
2176
2177
2178
2179
2180
2181
2182
2183
2184
2185
2186
2187
2188
2189
2190
2191
2192
2193
2194
2195
2196
2197
2198
2199
2200
2201
2202
2203
2204
2205
2206
2207
2208
2209
2210
2211
2212
2213
2214
2215
2216
2217
2218
2219
2220
2221
2222
2223
2224
2225
2226
2227
2228
2229
2230
2231
2232
2233
2234
2235
2236
2237
2238
2239
2240
2241
2242
2243
2244
2245
2246
2247
2248
2249
2250
2251
2252
2253
2254
2255
2256
2257
2258
2259
2260
2261
2262
2263
2264
2265
2266
2267
2268
2269
2270
2271
2272
2273
2274
2275
2276
2277
2278
2279
2280
2281
2282
2283
2284
2285
2286
2287
2288
2289
2290
2291
2292
2293
2294
2295
2296
2297
2298
2299
2300
2301
2302
2303
2304
2305
2306
2307
2308
2309
2310
2311
2312
2313
2314
2315
2316
2317
2318
2319
2320
2321
2322
2323
2324
2325
2326
2327
2328
2329
2330
2331
2332
2333
2334
2335
2336
2337
2338
2339
2340
2341
2342
2343
2344
2345
2346
2347
2348
2349
2350
2351
2352
2353
2354
2355
2356
2357
2358
2359
2360
2361
2362
2363
2364
2365
2366
2367
2368
2369
2370
2371
2372
2373
2374
2375
2376
2377
2378
2379
2380
2381
2382
2383
2384
2385
2386
2387
2388
2389
2390
2391
2392
2393
2394
2395
2396
2397
2398
2399
2400
2401
2402
2403
2404
2405
2406
2407
2408
2409
2410
2411
2412
2413
2414
2415
2416
2417
2418
2419
2420
2421
2422
2423
2424
2425
2426
2427
2428
2429
2430
2431
2432
2433
2434
2435
2436
2437
2438
2439
2440
2441
2442
2443
2444
2445
2446
2447
2448
2449
2450
2451
2452
2453
2454
2455
2456
2457
2458
2459
2460
2461
2462
2463
2464
2465
2466
2467
2468
2469
2470
2471
2472
2473
2474
2475
2476
2477
2478
2479
2480
2481
2482
2483
2484
2485
2486
2487
2488
2489
2490
2491
2492
2493
2494
2495
2496
2497
2498
2499
2500
2501
2502
2503
2504
2505
2506
2507
2508
2509
2510
2511
2512
2513
2514
2515
2516
2517
2518
2519
2520
2521
2522
2523
2524
2525
2526
2527
2528
2529
2530
2531
2532
2533
2534
2535
2536
2537
2538
2539
2540
2541
2542
2543
2544
2545
2546
2547
2548
2549
2550
2551
2552
2553
2554
2555
2556
2557
2558
2559
2560
2561
2562
2563
2564
2565
2566
2567
2568
2569
2570
2571
2572
2573
2574
2575
2576
2577
2578
2579
2580
2581
2582
2583
2584
2585
2586
2587
2588
2589
2590
2591
2592
2593
2594
2595
2596
2597
2598
2599
2600
2601
2602
2603
2604
2605
2606
2607
2608
2609
2610
2611
2612
2613
2614
2615
2616
2617
2618
2619
2620
2621
2622
2623
2624
2625
2626
2627
2628
2629
2630
2631
2632
2633
2634
2635
2636
2637
2638
2639
2640
2641
2642
2643
2644
2645
2646
2647
2648
2649
2650
2651
2652
2653
2654
2655
2656
2657
2658
2659
2660
2661
2662
2663
2664
2665
2666
2667
2668
2669
2670
2671
2672
2673
2674
2675
2676
2677
2678
2679
2680
2681
2682
2683
2684
2685
2686
2687
2688
2689
2690
2691
2692
2693
2694
2695
2696
2697
2698
2699
2700
2701
2702
2703
2704
2705
2706
2707
2708
2709
2710
2711
2712
2713
2714
2715
2716
2717
2718
2719
2720
2721
2722
2723
2724
2725
2726
2727
2728
2729
2730
2731
2732
2733
2734
2735
2736
2737
2738
2739
2740
2741
2742
2743
2744
2745
2746
2747
2748
2749
2750
2751
2752
2753
2754
2755
2756
2757
2758
2759
2760
2761
2762
2763
2764
2765
2766
2767
2768
2769
2770
2771
2772
2773
2774
2775
2776
2777
2778
2779
2780
2781
2782
2783
2784
2785
2786
2787
2788
2789
2790
2791
2792
2793
2794
2795
2796
2797
2798
2799
2800
2801
2802
2803
2804
2805
2806
2807
2808
2809
2810
2811
2812
2813
2814
2815
2816
2817
2818
2819
2820
2821
2822
2823
2824
2825
2826
2827
2828
2829
2830
2831
2832
2833
2834
2835
2836
2837
2838
2839
2840
2841
2842
2843
2844
2845
2846
2847
2848
2849
2850
2851
2852
2853
2854
2855
2856
2857
2858
2859
2860
2861
2862
2863
2864
2865
2866
2867
2868
2869
2870
2871
2872
2873
2874
2875
2876
2877
2878
2879
2880
2881
2882
2883
2884
2885
2886
2887
2888
2889
2890
2891
2892
2893
2894
2895
2896
2897
2898
2899
2900
2901
2902
2903
2904
2905
2906
2907
2908
2909
2910
2911
2912
2913
2914
2915
2916
2917
2918
2919
2920
2921
2922
2923
2924
2925
2926
2927
2928
2929
2930
2931
2932
2933
2934
2935
2936
2937
2938
2939
2940
2941
2942
2943
2944
2945
2946
2947
2948
2949
2950
2951
2952
2953
2954
2955
2956
2957
2958
2959
2960
2961
2962
2963
2964
2965
2966
2967
2968
2969
2970
2971
2972
2973
2974
2975
2976
2977
2978
2979
2980
2981
2982
2983
2984
2985
2986
2987
2988
2989
2990
2991
2992
2993
2994
2995
2996
2997
2998
2999
3000
3001
3002
3003
3004
3005
3006
3007
3008
3009
3010
3011
3012
3013
3014
3015
3016
3017
3018
3019
3020
3021
3022
3023
3024
3025
3026
3027
3028
3029
3030
3031
3032
3033
3034
3035
3036
3037
3038
3039
3040
3041
3042
3043
3044
3045
3046
3047
3048
3049
3050
3051
3052
3053
3054
3055
3056
3057
3058
3059
3060
3061
3062
3063
3064
3065
3066
3067
3068
3069
3070
3071
3072
3073
3074
3075
3076
3077
3078
3079
3080
3081
3082
3083
3084
3085
3086
3087
3088
3089
3090
3091
3092
3093
3094
3095
3096
3097
3098
3099
3100
3101
3102
3103
3104
3105
3106
3107
3108
3109
3110
3111
3112
3113
3114
3115
3116
3117
3118
3119
3120
3121
3122
3123
3124
3125
3126
3127
3128
3129
3130
3131
3132
3133
3134
3135
3136
3137
3138
3139
3140
3141
3142
3143
3144
3145
3146
3147
3148
3149
3150
3151
3152
3153
3154
3155
3156
3157
3158
3159
3160
3161
3162
3163
3164
3165
3166
3167
3168
3169
3170
3171
3172
3173
3174
3175
3176
3177
3178
3179
3180
3181
3182
3183
3184
3185
3186
3187
3188
3189
3190
3191
3192
3193
3194
3195
3196
3197
3198
3199
3200
3201
3202
3203
3204
3205
3206
3207
3208
3209
3210
3211
3212
3213
3214
3215
3216
3217
3218
3219
3220
3221
3222
3223
3224
3225
3226
3227
3228
3229
3230
3231
3232
3233
3234
3235
3236
3237
3238
3239
3240
3241
3242
3243
3244
3245
3246
3247
3248
3249
3250
3251
3252
3253
3254
3255
3256
3257
3258
3259
3260
3261
3262
3263
3264
3265
3266
3267
3268
3269
3270
3271
3272
3273
3274
3275
3276
3277
3278
3279
3280
3281
3282
3283
3284
3285
3286
3287
3288
3289
3290
3291
3292
3293
3294
3295
3296
3297
3298
3299
3300
3301
3302
3303
3304
3305
3306
3307
3308
3309
3310
3311
3312
3313
3314
3315
3316
3317
3318
3319
3320
3321
3322
3323
3324
3325
3326
3327
3328
3329
3330
3331
3332
3333
3334
3335
3336
3337
3338
3339
3340
3341
3342
3343
3344
3345
3346
3347
3348
3349
3350
3351
3352
3353
3354
3355
3356
3357
3358
3359
3360
3361
3362
3363
3364
3365
3366
3367
3368
3369
3370
3371
3372
3373
3374
3375
3376
3377
3378
3379
3380
3381
3382
3383
3384
3385
3386
3387
3388
3389
3390
3391
3392
3393
3394
3395
3396
3397
3398
3399
3400
3401
3402
3403
3404
3405
3406
3407
3408
3409
3410
3411
3412
3413
3414
3415
3416
|
/****************************************************************************
* arch/arm/src/stm32/stm32_eth.c
*
* Copyright (C) 2011-2012 Gregory Nutt. All rights reserved.
* Author: Gregory Nutt <gnutt@nuttx.org>
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions
* are met:
*
* 1. Redistributions of source code must retain the above copyright
* notice, this list of conditions and the following disclaimer.
* 2. Redistributions in binary form must reproduce the above copyright
* notice, this list of conditions and the following disclaimer in
* the documentation and/or other materials provided with the
* distribution.
* 3. Neither the name NuttX nor the names of its contributors may be
* used to endorse or promote products derived from this software
* without specific prior written permission.
*
* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
* "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
* LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
* FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE
* COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
* INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING,
* BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS
* OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED
* AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
* LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
* ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
* POSSIBILITY OF SUCH DAMAGE.
*
****************************************************************************/
/****************************************************************************
* Included Files
****************************************************************************/
#include <nuttx/config.h>
#if defined(CONFIG_NET) && defined(CONFIG_STM32_ETHMAC)
#include <stdint.h>
#include <stdbool.h>
#include <time.h>
#include <string.h>
#include <debug.h>
#include <wdog.h>
#include <queue.h>
#include <errno.h>
#include <nuttx/irq.h>
#include <nuttx/arch.h>
#include <nuttx/net/mii.h>
#include <nuttx/net/uip/uip.h>
#include <nuttx/net/uip/uip-arp.h>
#include <nuttx/net/uip/uip-arch.h>
#include "up_internal.h"
#include "chip.h"
#include "stm32_gpio.h"
#include "stm32_rcc.h"
#include "stm32_syscfg.h"
#include "stm32_eth.h"
#include <arch/board/board.h>
/* STM32_NETHERNET determines the number of physical interfaces
* that will be supported.
*/
#if STM32_NETHERNET > 0
/****************************************************************************
* Definitions
****************************************************************************/
/* Configuration ************************************************************/
/* See configs/stm3240g-eval/README.txt for an explanation of the configuration
* settings.
*/
#if STM32_NETHERNET > 1
# error "Logic to support multiple Ethernet interfaces is incomplete"
#endif
#if !defined(CONFIG_STM32_SYSCFG) && !defined(CONFIG_STM32_CONNECTIVITYLINE)
# error "CONFIG_STM32_SYSCFG must be defined in the NuttX configuration"
#endif
#ifndef CONFIG_STM32_PHYADDR
# error "CONFIG_STM32_PHYADDR must be defined in the NuttX configuration"
#endif
#if !defined(CONFIG_STM32_MII) && !defined(CONFIG_STM32_RMII)
# warning "Neither CONFIG_STM32_MII nor CONFIG_STM32_RMII defined"
#endif
#if defined(CONFIG_STM32_MII) && defined(CONFIG_STM32_RMII)
# error "Both CONFIG_STM32_MII and CONFIG_STM32_RMII defined"
#endif
#ifdef CONFIG_STM32_MII
# if defined(CONFIG_STM32_STM32F20XX) || defined(CONFIG_STM32_STM32F40XX)
# if !defined(CONFIG_STM32_MII_MCO1) && !defined(CONFIG_STM32_MII_MCO2) && !defined(CONFIG_STM32_MII_EXTCLK)
# warning "Neither CONFIG_STM32_MII_MCO1, CONFIG_STM32_MII_MCO2, nor CONFIG_STM32_MII_EXTCLK defined"
# endif
# if defined(CONFIG_STM32_MII_MCO1) && defined(CONFIG_STM32_MII_MCO2)
# error "Both CONFIG_STM32_MII_MCO1 and CONFIG_STM32_MII_MCO2 defined"
# endif
# elif defined(CONFIG_STM32_CONNECTIVITYLINE)
# if !defined(CONFIG_STM32_MII_MCO) && !defined(CONFIG_STM32_MII_EXTCLK)
# warning "Neither CONFIG_STM32_MII_MCO nor CONFIG_STM32_MII_EXTCLK defined"
# endif
# endif
#endif
#ifdef CONFIG_STM32_RMII
# if defined(CONFIG_STM32_STM32F20XX) || defined(CONFIG_STM32_STM32F40XX)
# if !defined(CONFIG_STM32_RMII_MCO1) && !defined(CONFIG_STM32_RMII_MCO2) && !defined(CONFIG_STM32_RMII_EXTCLK)
# warning "Neither CONFIG_STM32_RMII_MCO1, CONFIG_STM32_RMII_MCO2, nor CONFIG_STM32_RMII_EXTCLK defined"
# endif
# if defined(CONFIG_STM32_RMII_MCO1) && defined(CONFIG_STM32_RMII_MCO2)
# error "Both CONFIG_STM32_RMII_MCO1 and CONFIG_STM32_RMII_MCO2 defined"
# endif
# elif defined(CONFIG_STM32_CONNECTIVITYLINE)
# if !defined(CONFIG_STM32_RMII_MCO) && !defined(CONFIG_STM32_RMII_EXTCLK)
# warning "Neither CONFIG_STM32_RMII_MCO nor CONFIG_STM32_RMII_EXTCLK defined"
# endif
# endif
#endif
#ifdef CONFIG_STM32_AUTONEG
# ifndef CONFIG_STM32_PHYSR
# error "CONFIG_STM32_PHYSR must be defined in the NuttX configuration"
# endif
# ifdef CONFIG_STM32_PHYSR_ALTCONFIG
# ifndef CONFIG_STM32_PHYSR_ALTMODE
# error "CONFIG_STM32_PHYSR_ALTMODE must be defined in the NuttX configuration"
# endif
# ifndef CONFIG_STM32_PHYSR_10HD
# error "CONFIG_STM32_PHYSR_10HD must be defined in the NuttX configuration"
# endif
# ifndef CONFIG_STM32_PHYSR_100HD
# error "CONFIG_STM32_PHYSR_100HD must be defined in the NuttX configuration"
# endif
# ifndef CONFIG_STM32_PHYSR_10FD
# error "CONFIG_STM32_PHYSR_10FD must be defined in the NuttX configuration"
# endif
# ifndef CONFIG_STM32_PHYSR_100FD
# error "CONFIG_STM32_PHYSR_100FD must be defined in the NuttX configuration"
# endif
# else
# ifndef CONFIG_STM32_PHYSR_SPEED
# error "CONFIG_STM32_PHYSR_SPEED must be defined in the NuttX configuration"
# endif
# ifndef CONFIG_STM32_PHYSR_100MBPS
# error "CONFIG_STM32_PHYSR_100MBPS must be defined in the NuttX configuration"
# endif
# ifndef CONFIG_STM32_PHYSR_MODE
# error "CONFIG_STM32_PHYSR_MODE must be defined in the NuttX configuration"
# endif
# ifndef CONFIG_STM32_PHYSR_FULLDUPLEX
# error "CONFIG_STM32_PHYSR_FULLDUPLEX must be defined in the NuttX configuration"
# endif
# endif
#endif
#ifdef CONFIG_STM32_ETH_PTP
# warning "CONFIG_STM32_ETH_PTP is not yet supported"
#endif
/* This driver does not use enhanced descriptors. Enhanced descriptors must
* be used, however, if time stamping or and/or IPv4 checksum offload is
* supported.
*/
#undef CONFIG_STM32_ETH_ENHANCEDDESC
#undef CONFIG_STM32_ETH_HWCHECKSUM
/* Ethernet buffer sizes, number of buffers, and number of descriptors */
#ifndef CONFIG_NET_MULTIBUFFER
# error "CONFIG_NET_MULTIBUFFER is required"
#endif
/* Add 4 to the configured buffer size to account for the 2 byte checksum
* memory needed at the end of the maximum size packet. Buffer sizes must
* be an even multiple of 4, 8, or 16 bytes (depending on buswidth). We
* will use the 16-byte alignment in all cases.
*/
#define OPTIMAL_ETH_BUFSIZE ((CONFIG_NET_BUFSIZE + 4 + 15) & ~15)
#ifndef CONFIG_STM32_ETH_BUFSIZE
# define CONFIG_STM32_ETH_BUFSIZE OPTIMAL_ETH_BUFSIZE
#endif
#if CONFIG_STM32_ETH_BUFSIZE > ETH_TDES1_TBS1_MASK
# error "CONFIG_STM32_ETH_BUFSIZE is too large"
#endif
#if (CONFIG_STM32_ETH_BUFSIZE & 15) != 0
# error "CONFIG_STM32_ETH_BUFSIZE must be aligned"
#endif
#if CONFIG_STM32_ETH_BUFSIZE != OPTIMAL_ETH_BUFSIZE
# warning "You using an incomplete/untested configuration"
#endif
#ifndef CONFIG_STM32_ETH_NRXDESC
# define CONFIG_STM32_ETH_NRXDESC 8
#endif
#ifndef CONFIG_STM32_ETH_NTXDESC
# define CONFIG_STM32_ETH_NTXDESC 4
#endif
/* We need at least one more free buffer than transmit buffers */
#define STM32_ETH_NFREEBUFFERS (CONFIG_STM32_ETH_NTXDESC+1)
/* Extremely detailed register debug that you would normally never want
* enabled.
*/
#ifndef CONFIG_DEBUG
# undef CONFIG_STM32_ETHMAC_REGDEBUG
#endif
/* Clocking *****************************************************************/
/* Set MACMIIAR CR bits depending on HCLK setting */
#if STM32_HCLK_FREQUENCY >= 20000000 && STM32_HCLK_FREQUENCY < 35000000
# define ETH_MACMIIAR_CR ETH_MACMIIAR_CR_20_35
#elif STM32_HCLK_FREQUENCY >= 35000000 && STM32_HCLK_FREQUENCY < 60000000
# define ETH_MACMIIAR_CR ETH_MACMIIAR_CR_35_60
#elif STM32_HCLK_FREQUENCY >= 60000000 && STM32_HCLK_FREQUENCY < 100000000
# define ETH_MACMIIAR_CR ETH_MACMIIAR_CR_60_100
#elif STM32_HCLK_FREQUENCY >= 100000000 && STM32_HCLK_FREQUENCY < 150000000
# define ETH_MACMIIAR_CR ETH_MACMIIAR_CR_100_150
#elif STM32_HCLK_FREQUENCY >= 150000000 && STM32_HCLK_FREQUENCY <= 168000000
# define ETH_MACMIIAR_CR ETH_MACMIIAR_CR_150_168
#else
# error "STM32_HCLK_FREQUENCY not supportable"
#endif
/* Timing *******************************************************************/
/* TX poll delay = 1 seconds. CLK_TCK is the number of clock ticks per
* second
*/
#define STM32_WDDELAY (1*CLK_TCK)
#define STM32_POLLHSEC (1*2)
/* TX timeout = 1 minute */
#define STM32_TXTIMEOUT (60*CLK_TCK)
/* PHY reset/configuration delays in milliseconds */
#define PHY_RESET_DELAY (65)
#define PHY_CONFIG_DELAY (1000)
/* PHY read/write delays in loop counts */
#define PHY_READ_TIMEOUT (0x0004ffff)
#define PHY_WRITE_TIMEOUT (0x0004ffff)
#define PHY_RETRY_TIMEOUT (0x0004ffff)
/* Register values **********************************************************/
/* Clear the MACCR bits that will be setup during MAC initialization (or that
* are cleared unconditionally). Per the reference manual, all reserved bits
* must be retained at their reset value.
*
* ETH_MACCR_RE Bit 2: Receiver enable
* ETH_MACCR_TE Bit 3: Transmitter enable
* ETH_MACCR_DC Bit 4: Deferral check
* ETH_MACCR_BL Bits 5-6: Back-off limit
* ETH_MACCR_APCS Bit 7: Automatic pad/CRC stripping
* ETH_MACCR_RD Bit 9: Retry disable
* ETH_MACCR_IPCO Bit 10: IPv4 checksum offload
* ETH_MACCR_DM Bit 11: Duplex mode
* ETH_MACCR_LM Bit 12: Loopback mode
* ETH_MACCR_ROD Bit 13: Receive own disable
* ETH_MACCR_FES Bit 14: Fast Ethernet speed
* ETH_MACCR_CSD Bit 16: Carrier sense disable
* ETH_MACCR_IFG Bits 17-19: Interframe gap
* ETH_MACCR_JD Bit 22: Jabber disable
* ETH_MACCR_WD Bit 23: Watchdog disable
* ETH_MACCR_CSTF Bits 25: CRC stripping for Type frames (F2/F4 only)
*/
#if defined(CONFIG_STM32_STM32F20XX) || defined(CONFIG_STM32_STM32F40XX)
#define MACCR_CLEAR_BITS \
(ETH_MACCR_RE | ETH_MACCR_TE | ETH_MACCR_DC | ETH_MACCR_BL_MASK | \
ETH_MACCR_APCS | ETH_MACCR_RD | ETH_MACCR_IPCO | ETH_MACCR_DM | \
ETH_MACCR_LM | ETH_MACCR_ROD | ETH_MACCR_FES | ETH_MACCR_CSD | \
ETH_MACCR_IFG_MASK | ETH_MACCR_JD | ETH_MACCR_WD | ETH_MACCR_CSTF)
#else
#define MACCR_CLEAR_BITS \
(ETH_MACCR_RE | ETH_MACCR_TE | ETH_MACCR_DC | ETH_MACCR_BL_MASK | \
ETH_MACCR_APCS | ETH_MACCR_RD | ETH_MACCR_IPCO | ETH_MACCR_DM | \
ETH_MACCR_LM | ETH_MACCR_ROD | ETH_MACCR_FES | ETH_MACCR_CSD | \
ETH_MACCR_IFG_MASK | ETH_MACCR_JD | ETH_MACCR_WD)
#endif
/* The following bits are set or left zero unconditionally in all modes.
*
* ETH_MACCR_RE Receiver enable 0 (disabled)
* ETH_MACCR_TE Transmitter enable 0 (disabled)
* ETH_MACCR_DC Deferral check 0 (disabled)
* ETH_MACCR_BL Back-off limit 0 (10)
* ETH_MACCR_APCS Automatic pad/CRC stripping 0 (disabled)
* ETH_MACCR_RD Retry disable 1 (disabled)
* ETH_MACCR_IPCO IPv4 checksum offload Depends on CONFIG_STM32_ETH_HWCHECKSUM
* ETH_MACCR_LM Loopback mode 0 (disabled)
* ETH_MACCR_ROD Receive own disable 0 (enabled)
* ETH_MACCR_CSD Carrier sense disable 0 (enabled)
* ETH_MACCR_IFG Interframe gap 0 (96 bits)
* ETH_MACCR_JD Jabber disable 0 (enabled)
* ETH_MACCR_WD Watchdog disable 0 (enabled)
* ETH_MACCR_CSTF CRC stripping for Type frames 0 (disabled, F2/F4 only)
*
* The following are set conditioinally based on mode and speed.
*
* ETH_MACCR_DM Duplex mode Depends on priv->fduplex
* ETH_MACCR_FES Fast Ethernet speed Depends on priv->mbps100
*/
#ifdef CONFIG_STM32_ETH_HWCHECKSUM
# define MACCR_SET_BITS \
(ETH_MACCR_BL_10 | ETH_MACCR_RD | ETH_MACCR_IPCO | ETH_MACCR_IFG(96))
#else
# define MACCR_SET_BITS \
(ETH_MACCR_BL_10 | ETH_MACCR_RD | ETH_MACCR_IFG(96))
#endif
/* Clear the MACCR bits that will be setup during MAC initialization (or that
* are cleared unconditionally). Per the reference manual, all reserved bits
* must be retained at their reset value.
*
* ETH_MACFFR_PM Bit 0: Promiscuous mode
* ETH_MACFFR_HU Bit 1: Hash unicast
* ETH_MACFFR_HM Bit 2: Hash multicast
* ETH_MACFFR_DAIF Bit 3: Destination address inverse filtering
* ETH_MACFFR_PAM Bit 4: Pass all multicast
* ETH_MACFFR_BFD Bit 5: Broadcast frames disable
* ETH_MACFFR_PCF Bits 6-7: Pass control frames
* ETH_MACFFR_SAIF Bit 8: Source address inverse filtering
* ETH_MACFFR_SAF Bit 9: Source address filter
* ETH_MACFFR_HPF Bit 10: Hash or perfect filter
* ETH_MACFFR_RA Bit 31: Receive all
*/
#define MACFFR_CLEAR_BITS \
(ETH_MACFFR_PM | ETH_MACFFR_HU | ETH_MACFFR_HM | ETH_MACFFR_DAIF | \
ETH_MACFFR_PAM | ETH_MACFFR_BFD | ETH_MACFFR_PCF_MASK | ETH_MACFFR_SAIF | \
ETH_MACFFR_SAF | ETH_MACFFR_HPF | ETH_MACFFR_RA)
/* The following bits are set or left zero unconditionally in all modes.
*
* ETH_MACFFR_PM Promiscuous mode 0 (disabled)
* ETH_MACFFR_HU Hash unicast 0 (perfect dest filtering)
* ETH_MACFFR_HM Hash multicast 0 (perfect dest filtering)
* ETH_MACFFR_DAIF Destination address inverse filtering 0 (normal)
* ETH_MACFFR_PAM Pass all multicast 0 (Depends on HM bit)
* ETH_MACFFR_BFD Broadcast frames disable 0 (enabled)
* ETH_MACFFR_PCF Pass control frames 1 (block all but PAUSE)
* ETH_MACFFR_SAIF Source address inverse filtering 0 (not used)
* ETH_MACFFR_SAF Source address filter 0 (disabled)
* ETH_MACFFR_HPF Hash or perfect filter 0 (Only matching frames passed)
* ETH_MACFFR_RA Receive all 0 (disabled)
*/
#define MACFFR_SET_BITS (ETH_MACFFR_PCF_PAUSE)
/* Clear the MACFCR bits that will be setup during MAC initialization (or that
* are cleared unconditionally). Per the reference manual, all reserved bits
* must be retained at their reset value.
*
* ETH_MACFCR_FCB_BPA Bit 0: Flow control busy/back pressure activate
* ETH_MACFCR_TFCE Bit 1: Transmit flow control enable
* ETH_MACFCR_RFCE Bit 2: Receive flow control enable
* ETH_MACFCR_UPFD Bit 3: Unicast pause frame detect
* ETH_MACFCR_PLT Bits 4-5: Pause low threshold
* ETH_MACFCR_ZQPD Bit 7: Zero-quanta pause disable
* ETH_MACFCR_PT Bits 16-31: Pause time
*/
#define MACFCR_CLEAR_MASK \
(ETH_MACFCR_FCB_BPA | ETH_MACFCR_TFCE | ETH_MACFCR_RFCE | ETH_MACFCR_UPFD | \
ETH_MACFCR_PLT_MASK | ETH_MACFCR_ZQPD | ETH_MACFCR_PT_MASK)
/* The following bits are set or left zero unconditionally in all modes.
*
* ETH_MACFCR_FCB_BPA Flow control busy/back pressure activate 0 (no pause control frame)
* ETH_MACFCR_TFCE Transmit flow control enable 0 (disabled)
* ETH_MACFCR_RFCE Receive flow control enable 0 (disabled)
* ETH_MACFCR_UPFD Unicast pause frame detect 0 (disabled)
* ETH_MACFCR_PLT Pause low threshold 0 (pause time - 4)
* ETH_MACFCR_ZQPD Zero-quanta pause disable 1 (disabled)
* ETH_MACFCR_PT Pause time 0
*/
#define MACFCR_SET_MASK (ETH_MACFCR_PLT_M4 | ETH_MACFCR_ZQPD)
/* Clear the DMAOMR bits that will be setup during MAC initialization (or that
* are cleared unconditionally). Per the reference manual, all reserved bits
* must be retained at their reset value.
*
* ETH_DMAOMR_SR Bit 1: Start/stop receive
* TH_DMAOMR_OSF Bit 2: Operate on second frame
* ETH_DMAOMR_RTC Bits 3-4: Receive threshold control
* ETH_DMAOMR_FUGF Bit 6: Forward undersized good frames
* ETH_DMAOMR_FEF Bit 7: Forward error frames
* ETH_DMAOMR_ST Bit 13: Start/stop transmission
* ETH_DMAOMR_TTC Bits 14-16: Transmit threshold control
* ETH_DMAOMR_FTF Bit 20: Flush transmit FIFO
* ETH_DMAOMR_TSF Bit 21: Transmit store and forward
* ETH_DMAOMR_DFRF Bit 24: Disable flushing of received frames
* ETH_DMAOMR_RSF Bit 25: Receive store and forward
* TH_DMAOMR_DTCEFD Bit 26: Dropping of TCP/IP checksum error frames disable
*/
#define DMAOMR_CLEAR_MASK \
(ETH_DMAOMR_SR | ETH_DMAOMR_OSF | ETH_DMAOMR_RTC_MASK | ETH_DMAOMR_FUGF | \
ETH_DMAOMR_FEF | ETH_DMAOMR_ST | ETH_DMAOMR_TTC_MASK | ETH_DMAOMR_FTF | \
ETH_DMAOMR_TSF | ETH_DMAOMR_DFRF | ETH_DMAOMR_RSF | ETH_DMAOMR_DTCEFD)
/* The following bits are set or left zero unconditionally in all modes.
*
* ETH_DMAOMR_SR Start/stop receive 0 (not running)
* TH_DMAOMR_OSF Operate on second frame 1 (enabled)
* ETH_DMAOMR_RTC Receive threshold control 0 (64 bytes)
* ETH_DMAOMR_FUGF Forward undersized good frames 0 (disabled)
* ETH_DMAOMR_FEF Forward error frames 0 (disabled)
* ETH_DMAOMR_ST Start/stop transmission 0 (not running)
* ETH_DMAOMR_TTC Transmit threshold control 0 (64 bytes)
* ETH_DMAOMR_FTF Flush transmit FIFO 0 (no flush)
* ETH_DMAOMR_TSF Transmit store and forward Depends on CONFIG_STM32_ETH_HWCHECKSUM
* ETH_DMAOMR_DFRF Disable flushing of received frames 0 (enabled)
* ETH_DMAOMR_RSF Receive store and forward Depends on CONFIG_STM32_ETH_HWCHECKSUM
* TH_DMAOMR_DTCEFD Dropping of TCP/IP checksum error Depends on CONFIG_STM32_ETH_HWCHECKSUM
* frames disable
*
* When the checksum offload feature is enabled, we need to enable the Store
* and Forward mode: the store and forward guarantee that a whole frame is
* stored in the FIFO, so the MAC can insert/verify the checksum, if the
* checksum is OK the DMA can handle the frame otherwise the frame is dropped
*/
#if CONFIG_STM32_ETH_HWCHECKSUM
# define DMAOMR_SET_MASK \
(ETH_DMAOMR_OSF | ETH_DMAOMR_RTC_64 | ETH_DMAOMR_TTC_64 | \
ETH_DMAOMR_TSF | ETH_DMAOMR_RSF)
#else
# define DMAOMR_SET_MASK \
(ETH_DMAOMR_OSF | ETH_DMAOMR_RTC_64 | ETH_DMAOMR_TTC_64 | \
ETH_DMAOMR_DTCEFD)
#endif
/* Clear the DMABMR bits that will be setup during MAC initialization (or that
* are cleared unconditionally). Per the reference manual, all reserved bits
* must be retained at their reset value.
*
* ETH_DMABMR_SR Bit 0: Software reset
* ETH_DMABMR_DA Bit 1: DMA Arbitration
* ETH_DMABMR_DSL Bits 2-6: Descriptor skip length
* ETH_DMABMR_EDFE Bit 7: Enhanced descriptor format enable
* ETH_DMABMR_PBL Bits 8-13: Programmable burst length
* ETH_DMABMR_RTPR Bits 14-15: RX TX priority ratio
* ETH_DMABMR_FB Bit 16: Fixed burst
* ETH_DMABMR_RDP Bits 17-22: RX DMA PBL
* ETH_DMABMR_USP Bit 23: Use separate PBL
* ETH_DMABMR_FPM Bit 24: 4xPBL mode
* ETH_DMABMR_AAB Bit 25: Address-aligned beats
* ETH_DMABMR_MB Bit 26: Mixed burst (F2/F4 only)
*/
#if defined(CONFIG_STM32_STM32F20XX) || defined(CONFIG_STM32_STM32F40XX)
#define DMABMR_CLEAR_MASK \
(ETH_DMABMR_SR | ETH_DMABMR_DA | ETH_DMABMR_DSL_MASK | ETH_DMABMR_EDFE | \
ETH_DMABMR_PBL_MASK | ETH_DMABMR_RTPR_MASK | ETH_DMABMR_FB | ETH_DMABMR_RDP_MASK | \
ETH_DMABMR_USP | ETH_DMABMR_FPM | ETH_DMABMR_AAB | ETH_DMABMR_MB)
#else
#define DMABMR_CLEAR_MASK \
(ETH_DMABMR_SR | ETH_DMABMR_DA | ETH_DMABMR_DSL_MASK | ETH_DMABMR_EDFE | \
ETH_DMABMR_PBL_MASK | ETH_DMABMR_RTPR_MASK | ETH_DMABMR_FB | ETH_DMABMR_RDP_MASK | \
ETH_DMABMR_USP | ETH_DMABMR_FPM | ETH_DMABMR_AAB)
#endif
/* The following bits are set or left zero unconditionally in all modes.
*
*
* ETH_DMABMR_SR Software reset 0 (no reset)
* ETH_DMABMR_DA DMA Arbitration 0 (round robin)
* ETH_DMABMR_DSL Descriptor skip length 0
* ETH_DMABMR_EDFE Enhanced descriptor format enable Depends on CONFIG_STM32_ETH_ENHANCEDDESC
* ETH_DMABMR_PBL Programmable burst length 32 beats
* ETH_DMABMR_RTPR RX TX priority ratio 2:1
* ETH_DMABMR_FB Fixed burst 1 (enabled)
* ETH_DMABMR_RDP RX DMA PBL 32 beats
* ETH_DMABMR_USP Use separate PBL 1 (enabled)
* ETH_DMABMR_FPM 4xPBL mode 0 (disabled)
* ETH_DMABMR_AAB Address-aligned beats 1 (enabled)
* ETH_DMABMR_MB Mixed burst 0 (disabled, F2/F4 only)
*/
#ifdef CONFIG_STM32_ETH_ENHANCEDDESC
# define DMABMR_SET_MASK \
(ETH_DMABMR_DSL(0) | ETH_DMABMR_PBL(32) | ETH_DMABMR_EDFE | ETH_DMABMR_RTPR_2TO1 | \
ETH_DMABMR_FB | ETH_DMABMR_RDP(32) | ETH_DMABMR_USP | ETH_DMABMR_AAB)
#else
# define DMABMR_SET_MASK \
(ETH_DMABMR_DSL(0) | ETH_DMABMR_PBL(32) | ETH_DMABMR_RTPR_2TO1 | ETH_DMABMR_FB | \
ETH_DMABMR_RDP(32) | ETH_DMABMR_USP | ETH_DMABMR_AAB)
#endif
/* Interrupt bit sets *******************************************************/
/* All interrupts in the normal and abnormal interrupt summary. Early transmit
* interrupt (ETI) is excluded from the abnormal set because it causes too
* many interrupts and is not interesting.
*/
#define ETH_DMAINT_NORMAL \
(ETH_DMAINT_TI | ETH_DMAINT_TBUI |ETH_DMAINT_RI | ETH_DMAINT_ERI)
#define ETH_DMAINT_ABNORMAL \
(ETH_DMAINT_TPSI | ETH_DMAINT_TJTI | ETH_DMAINT_ROI | ETH_DMAINT_TUI | \
ETH_DMAINT_RBUI | ETH_DMAINT_RPSI | ETH_DMAINT_RWTI | /* ETH_DMAINT_ETI | */ \
ETH_DMAINT_FBEI)
/* Normal receive, transmit, error interrupt enable bit sets */
#define ETH_DMAINT_RECV_ENABLE (ETH_DMAINT_NIS | ETH_DMAINT_RI)
#define ETH_DMAINT_XMIT_ENABLE (ETH_DMAINT_NIS | ETH_DMAINT_TI)
#define ETH_DMAINT_XMIT_DISABLE (ETH_DMAINT_TI)
#ifdef CONFIG_DEBUG_NET
# define ETH_DMAINT_ERROR_ENABLE (ETH_DMAINT_AIS | ETH_DMAINT_ABNORMAL)
#else
# define ETH_DMAINT_ERROR_ENABLE (0)
#endif
/* Helpers ******************************************************************/
/* This is a helper pointer for accessing the contents of the Ethernet
* header
*/
#define BUF ((struct uip_eth_hdr *)priv->dev.d_buf)
/****************************************************************************
* Private Types
****************************************************************************/
/* The stm32_ethmac_s encapsulates all state information for a single hardware
* interface
*/
struct stm32_ethmac_s
{
uint8_t ifup : 1; /* true:ifup false:ifdown */
uint8_t mbps100 : 1; /* 100MBps operation (vs 10 MBps) */
uint8_t fduplex : 1; /* Full (vs. half) duplex */
WDOG_ID txpoll; /* TX poll timer */
WDOG_ID txtimeout; /* TX timeout timer */
/* This holds the information visible to uIP/NuttX */
struct uip_driver_s dev; /* Interface understood by uIP */
/* Used to track transmit and receive descriptors */
struct eth_txdesc_s *txhead; /* Next available TX descriptor */
struct eth_rxdesc_s *rxhead; /* Next available RX descriptor */
struct eth_txdesc_s *txtail; /* First "in_flight" TX descriptor */
struct eth_rxdesc_s *rxcurr; /* First RX descriptor of the segment */
uint16_t segments; /* RX segment count */
uint16_t inflight; /* Number of TX transfers "in_flight" */
sq_queue_t freeb; /* The free buffer list */
/* Descriptor allocations */
struct eth_rxdesc_s rxtable[CONFIG_STM32_ETH_NRXDESC];
struct eth_txdesc_s txtable[CONFIG_STM32_ETH_NTXDESC];
/* Buffer allocations */
uint8_t rxbuffer[CONFIG_STM32_ETH_NRXDESC*CONFIG_STM32_ETH_BUFSIZE];
uint8_t alloc[STM32_ETH_NFREEBUFFERS*CONFIG_STM32_ETH_BUFSIZE];
};
/****************************************************************************
* Private Data
****************************************************************************/
static struct stm32_ethmac_s g_stm32ethmac[STM32_NETHERNET];
/****************************************************************************
* Private Function Prototypes
****************************************************************************/
/* Register operations ******************************************************/
#if defined(CONFIG_STM32_ETHMAC_REGDEBUG) && defined(CONFIG_DEBUG)
static uint32_t stm32_getreg(uint32_t addr);
static void stm32_putreg(uint32_t val, uint32_t addr);
static void stm32_checksetup(void);
#else
# define stm32_getreg(addr) getreg32(addr)
# define stm32_putreg(val,addr) putreg32(val,addr)
# define stm32_checksetup()
#endif
/* Free buffer management */
static void stm32_initbuffer(FAR struct stm32_ethmac_s *priv);
static inline uint8_t *stm32_allocbuffer(FAR struct stm32_ethmac_s *priv);
static inline void stm32_freebuffer(FAR struct stm32_ethmac_s *priv, uint8_t *buffer);
static inline bool stm32_isfreebuffer(FAR struct stm32_ethmac_s *priv);
/* Common TX logic */
static int stm32_transmit(FAR struct stm32_ethmac_s *priv);
static int stm32_uiptxpoll(struct uip_driver_s *dev);
static void stm32_dopoll(FAR struct stm32_ethmac_s *priv);
/* Interrupt handling */
static void stm32_enableint(FAR struct stm32_ethmac_s *priv, uint32_t ierbit);
static void stm32_disableint(FAR struct stm32_ethmac_s *priv, uint32_t ierbit);
static void stm32_freesegment(FAR struct stm32_ethmac_s *priv,
FAR struct eth_rxdesc_s *rxfirst, int segments);
static int stm32_recvframe(FAR struct stm32_ethmac_s *priv);
static void stm32_receive(FAR struct stm32_ethmac_s *priv);
static void stm32_freeframe(FAR struct stm32_ethmac_s *priv);
static void stm32_txdone(FAR struct stm32_ethmac_s *priv);
static int stm32_interrupt(int irq, FAR void *context);
/* Watchdog timer expirations */
static void stm32_polltimer(int argc, uint32_t arg, ...);
static void stm32_txtimeout(int argc, uint32_t arg, ...);
/* NuttX callback functions */
static int stm32_ifup(struct uip_driver_s *dev);
static int stm32_ifdown(struct uip_driver_s *dev);
static int stm32_txavail(struct uip_driver_s *dev);
#ifdef CONFIG_NET_IGMP
static int stm32_addmac(struct uip_driver_s *dev, FAR const uint8_t *mac);
static int stm32_rmmac(struct uip_driver_s *dev, FAR const uint8_t *mac);
#endif
/* Descriptor Initialization */
static void stm32_txdescinit(FAR struct stm32_ethmac_s *priv);
static void stm32_rxdescinit(FAR struct stm32_ethmac_s *priv);
/* PHY Initialization */
static int stm32_phyread(uint16_t phydevaddr, uint16_t phyregaddr, uint16_t *value);
static int stm32_phywrite(uint16_t phydevaddr, uint16_t phyregaddr, uint16_t value);
#ifdef CONFIG_PHY_DM9161
static inline int stm32_dm9161(FAR struct stm32_ethmac_s *priv);
#endif
static int stm32_phyinit(FAR struct stm32_ethmac_s *priv);
/* MAC/DMA Initialization */
#ifdef CONFIG_STM32_MII
static inline void stm32_selectmii(void);
#endif
#ifdef CONFIG_STM32_RMII
static inline void stm32_selectrmii(void);
#endif
static inline void stm32_ethgpioconfig(FAR struct stm32_ethmac_s *priv);
static void stm32_ethreset(FAR struct stm32_ethmac_s *priv);
static int stm32_macconfig(FAR struct stm32_ethmac_s *priv);
static void stm32_macaddress(FAR struct stm32_ethmac_s *priv);
static int stm32_macenable(FAR struct stm32_ethmac_s *priv);
static int stm32_ethconfig(FAR struct stm32_ethmac_s *priv);
/****************************************************************************
* Private Functions
****************************************************************************/
/****************************************************************************
* Name: stm32_getreg
*
* Description:
* This function may to used to intercept an monitor all register accesses.
* Clearly this is nothing you would want to do unless you are debugging
* this driver.
*
* Input Parameters:
* addr - The register address to read
*
* Returned Value:
* The value read from the register
*
****************************************************************************/
#if defined(CONFIG_STM32_ETHMAC_REGDEBUG) && defined(CONFIG_DEBUG)
static uint32_t stm32_getreg(uint32_t addr)
{
static uint32_t prevaddr = 0;
static uint32_t preval = 0;
static uint32_t count = 0;
/* Read the value from the register */
uint32_t val = getreg32(addr);
/* Is this the same value that we read from the same register last time?
* Are we polling the register? If so, suppress some of the output.
*/
if (addr == prevaddr && val == preval)
{
if (count == 0xffffffff || ++count > 3)
{
if (count == 4)
{
lldbg("...\n");
}
return val;
}
}
/* No this is a new address or value */
else
{
/* Did we print "..." for the previous value? */
if (count > 3)
{
/* Yes.. then show how many times the value repeated */
lldbg("[repeats %d more times]\n", count-3);
}
/* Save the new address, value, and count */
prevaddr = addr;
preval = val;
count = 1;
}
/* Show the register value read */
lldbg("%08x->%08x\n", addr, val);
return val;
}
#endif
/****************************************************************************
* Name: stm32_putreg
*
* Description:
* This function may to used to intercept an monitor all register accesses.
* Clearly this is nothing you would want to do unless you are debugging
* this driver.
*
* Input Parameters:
* val - The value to write to the register
* addr - The register address to read
*
* Returned Value:
* None
*
****************************************************************************/
#if defined(CONFIG_STM32_ETHMAC_REGDEBUG) && defined(CONFIG_DEBUG)
static void stm32_putreg(uint32_t val, uint32_t addr)
{
/* Show the register value being written */
lldbg("%08x<-%08x\n", addr, val);
/* Write the value */
putreg32(val, addr);
}
#endif
/****************************************************************************
* Name: stm32_checksetup
*
* Description:
* Show the state of critical configuration registers.
*
* Input Parameters:
* None
*
* Returned Value:
* None
*
****************************************************************************/
#if defined(CONFIG_STM32_ETHMAC_REGDEBUG) && defined(CONFIG_DEBUG)
static void stm32_checksetup(void)
{
}
#endif
/****************************************************************************
* Function: stm32_initbuffer
*
* Description:
* Initialize the free buffer list.
*
* Parameters:
* priv - Reference to the driver state structure
*
* Returned Value:
* None
*
* Assumptions:
* Called during early driver initialization before Ethernet interrupts
* are enabled.
*
****************************************************************************/
static void stm32_initbuffer(FAR struct stm32_ethmac_s *priv)
{
uint8_t *buffer;
int i;
/* Initialize the head of the free buffer list */
sq_init(&priv->freeb);
/* Add all of the pre-allocated buffers to the free buffer list */
for (i = 0, buffer = priv->alloc;
i < STM32_ETH_NFREEBUFFERS;
i++, buffer += CONFIG_STM32_ETH_BUFSIZE)
{
sq_addlast((FAR sq_entry_t *)buffer, &priv->freeb);
}
}
/****************************************************************************
* Function: stm32_allocbuffer
*
* Description:
* Allocate one buffer from the free buffer list.
*
* Parameters:
* priv - Reference to the driver state structure
*
* Returned Value:
* Pointer to the allocated buffer on success; NULL on failure
*
* Assumptions:
* May or may not be called from an interrupt handler. In either case,
* global interrupts are disabled, either explicitly or indirectly through
* interrupt handling logic.
*
****************************************************************************/
static inline uint8_t *stm32_allocbuffer(FAR struct stm32_ethmac_s *priv)
{
/* Allocate a buffer by returning the head of the free buffer list */
return (uint8_t *)sq_remfirst(&priv->freeb);
}
/****************************************************************************
* Function: stm32_freebuffer
*
* Description:
* Return a buffer to the free buffer list.
*
* Parameters:
* priv - Reference to the driver state structure
* buffer - A pointer to the buffer to be freed
*
* Returned Value:
* None
*
* Assumptions:
* May or may not be called from an interrupt handler. In either case,
* global interrupts are disabled, either explicitly or indirectly through
* interrupt handling logic.
*
****************************************************************************/
static inline void stm32_freebuffer(FAR struct stm32_ethmac_s *priv, uint8_t *buffer)
{
/* Free the buffer by adding it to to the end of the free buffer list */
sq_addlast((FAR sq_entry_t *)buffer, &priv->freeb);
}
/****************************************************************************
* Function: stm32_isfreebuffer
*
* Description:
* Return TRUE if the free buffer list is not empty.
*
* Parameters:
* priv - Reference to the driver state structure
*
* Returned Value:
* True if there are one or more buffers in the free buffer list;
* false if the free buffer list is empty
*
* Assumptions:
* None.
*
****************************************************************************/
static inline bool stm32_isfreebuffer(FAR struct stm32_ethmac_s *priv)
{
/* Return TRUE if the free buffer list is not empty */
return !sq_empty(&priv->freeb);
}
/****************************************************************************
* Function: stm32_transmit
*
* Description:
* Start hardware transmission. Called either from the txdone interrupt
* handling or from watchdog based polling.
*
* Parameters:
* priv - Reference to the driver state structure
*
* Returned Value:
* OK on success; a negated errno on failure
*
* Assumptions:
* May or may not be called from an interrupt handler. In either case,
* global interrupts are disabled, either explicitly or indirectly through
* interrupt handling logic.
*
****************************************************************************/
static int stm32_transmit(FAR struct stm32_ethmac_s *priv)
{
struct eth_txdesc_s *txdesc;
struct eth_txdesc_s *txfirst;
/* The internal (optimal) uIP buffer size may be configured to be larger
* than the Ethernet buffer size.
*/
#if OPTIMAL_ETH_BUFSIZE > CONFIG_STM32_ETH_BUFSIZE
uint8_t *buffer;
int bufcount;
int lastsize;
int i;
#endif
/* Verify that the hardware is ready to send another packet. If we get
* here, then we are committed to sending a packet; Higher level logic
* must have assured that there is no transmission in progress.
*/
txdesc = priv->txhead;
txfirst = txdesc;
nllvdbg("d_len: %d d_buf: %p txhead: %p tdes0: %08x\n",
priv->dev.d_len, priv->dev.d_buf, txdesc, txdesc->tdes0);
DEBUGASSERT(txdesc && (txdesc->tdes0 & ETH_TDES0_OWN) == 0);
/* Is the size to be sent greater than the size of the Ethernet buffer? */
DEBUGASSERT(priv->dev.d_len > 0 && priv->dev.d_buf != NULL);
#if OPTIMAL_ETH_BUFSIZE > CONFIG_STM32_ETH_BUFSIZE
if (priv->dev.d_len > CONFIG_STM32_ETH_BUFSIZE)
{
/* Yes... how many buffers will be need to send the packet? */
bufcount = (priv->dev.d_len + (CONFIG_STM32_ETH_BUFSIZE-1)) / CONFIG_STM32_ETH_BUFSIZE;
lastsize = priv->dev.d_len - (bufcount - 1) * CONFIG_STM32_ETH_BUFSIZE;
nllvdbg("bufcount: %d lastsize: %d\n", bufcount, lastsize);
/* Set the first segment bit in the first TX descriptor */
txdesc->tdes0 |= ETH_TDES0_FS;
/* Set up all but the last TX descriptor */
buffer = priv->dev.d_buf;
for (i = 0; i < bufcount; i++)
{
/* This could be a normal event but the design does not handle it */
DEBUGASSERT((txdesc->tdes0 & ETH_TDES0_OWN) == 0);
/* Set the Buffer1 address pointer */
txdesc->tdes2 = (uint32_t)buffer;
/* Set the buffer size in all TX descriptors */
if (i == (bufcount-1))
{
/* This is the last segment. Set the last segment bit in the
* last TX descriptor and ask for an interrupt when this
* segment transfer completes.
*/
txdesc->tdes0 |= (ETH_TDES0_LS | ETH_TDES0_IC);
/* This segement is, most likely, of fractional buffersize */
txdesc->tdes1 = lastsize;
buffer += lastsize;
}
else
{
/* This is not the last segment. We don't want an interrupt
* when this segment transfer completes.
*/
txdesc->tdes0 &= ~ETH_TDES0_IC;
/* The size of the transfer is the whole buffer */
txdesc->tdes1 = CONFIG_STM32_ETH_BUFSIZE;
buffer += CONFIG_STM32_ETH_BUFSIZE;
}
/* Give the descriptor to DMA */
txdesc->tdes0 |= ETH_TDES0_OWN;
txdesc = (struct eth_txdesc_s *)txdesc->tdes3;
}
}
else
#endif
{
/* The single descriptor is both the first and last segment. And we do
* want an interrupt when the transfer completes.
*/
txdesc->tdes0 |= (ETH_TDES0_FS | ETH_TDES0_LS | ETH_TDES0_IC);
/* Set frame size */
DEBUGASSERT(priv->dev.d_len <= CONFIG_NET_BUFSIZE);
txdesc->tdes1 = priv->dev.d_len;
/* Set the Buffer1 address pointer */
txdesc->tdes2 = (uint32_t)priv->dev.d_buf;
/* Set OWN bit of the TX descriptor tdes0. This gives the buffer to
* Ethernet DMA
*/
txdesc->tdes0 |= ETH_TDES0_OWN;
/* Point to the next available TX descriptor */
txdesc = (struct eth_txdesc_s *)txdesc->tdes3;
}
/* Remember where we left off in the TX descriptor chain */
priv->txhead = txdesc;
/* Detach the buffer from priv->dev structure. That buffer is now
* "in-flight".
*/
priv->dev.d_buf = NULL;
priv->dev.d_len = 0;
/* If there is no other TX buffer, in flight, then remember the location
* of the TX descriptor. This is the location to check for TX done events.
*/
if (!priv->txtail)
{
DEBUGASSERT(priv->inflight == 0);
priv->txtail = txfirst;
}
/* Increment the number of TX transfer in-flight */
priv->inflight++;
nllvdbg("txhead: %p txtail: %p inflight: %d\n",
priv->txhead, priv->txtail, priv->inflight);
/* If all TX descriptors are in-flight, then we have to disable receive interrupts
* too. This is because receive events can trigger more un-stoppable transmit
* events.
*/
if (priv->inflight >= CONFIG_STM32_ETH_NTXDESC)
{
stm32_disableint(priv, ETH_DMAINT_RI);
}
/* Check if the TX Buffer unavailable flag is set */
if ((stm32_getreg(STM32_ETH_DMASR) & ETH_DMAINT_TBUI) != 0)
{
/* Clear TX Buffer unavailable flag */
stm32_putreg(ETH_DMAINT_TBUI, STM32_ETH_DMASR);
/* Resume DMA transmission */
stm32_putreg(0, STM32_ETH_DMATPDR);
}
/* Enable TX interrupts */
stm32_enableint(priv, ETH_DMAINT_TI);
/* Setup the TX timeout watchdog (perhaps restarting the timer) */
(void)wd_start(priv->txtimeout, STM32_TXTIMEOUT, stm32_txtimeout, 1, (uint32_t)priv);
return OK;
}
/****************************************************************************
* Function: stm32_uiptxpoll
*
* Description:
* The transmitter is available, check if uIP has any outgoing packets ready
* to send. This is a callback from uip_poll(). uip_poll() may be called:
*
* 1. When the preceding TX packet send is complete,
* 2. When the preceding TX packet send timesout and the interface is reset
* 3. During normal TX polling
*
* Parameters:
* dev - Reference to the NuttX driver state structure
*
* Returned Value:
* OK on success; a negated errno on failure
*
* Assumptions:
* May or may not be called from an interrupt handler. In either case,
* global interrupts are disabled, either explicitly or indirectly through
* interrupt handling logic.
*
****************************************************************************/
static int stm32_uiptxpoll(struct uip_driver_s *dev)
{
FAR struct stm32_ethmac_s *priv = (FAR struct stm32_ethmac_s *)dev->d_private;
DEBUGASSERT(priv->dev.d_buf != NULL);
/* If the polling resulted in data that should be sent out on the network,
* the field d_len is set to a value > 0.
*/
if (priv->dev.d_len > 0)
{
/* Send the packet */
uip_arp_out(&priv->dev);
stm32_transmit(priv);
DEBUGASSERT(dev->d_len == 0 && dev->d_buf == NULL);
/* Check if the next TX descriptor is owned by the Ethernet DMA or CPU. We
* cannot perform the TX poll if we are unable to accept another packet for
* transmission.
*
* In a race condition, ETH_TDES0_OWN may be cleared BUT still not available
* because stm32_freeframe() has not yet run. If stm32_freeframe() has run,
* the buffer1 pointer (tdes2) will be nullified (and inflight should be <
* CONFIG_STM32_ETH_NTXDESC).
*/
if ((priv->txhead->tdes0 & ETH_TDES0_OWN) != 0 ||
priv->txhead->tdes2 != 0)
{
/* We have to terminate the poll if we have no more descriptors
* available for another transfer.
*/
return -EBUSY;
}
/* We have the descriptor, we can continue the poll. Allocate a new
* buffer for the poll.
*/
dev->d_buf = stm32_allocbuffer(priv);
/* We can't continue the poll if we have no buffers */
if (dev->d_buf == NULL)
{
/* Terminate the poll. */
return -ENOMEM;
}
}
/* If zero is returned, the polling will continue until all connections have
* been examined.
*/
return 0;
}
/****************************************************************************
* Function: stm32_dopoll
*
* Description:
* The function is called when a frame is received using the DMA receive
* interrupt. It scans the RX descriptors to the received frame.
*
* Parameters:
* priv - Reference to the driver state structure
*
* Returned Value:
* None
*
* Assumptions:
* Global interrupts are disabled by interrupt handling logic.
*
****************************************************************************/
static void stm32_dopoll(FAR struct stm32_ethmac_s *priv)
{
FAR struct uip_driver_s *dev = &priv->dev;
/* Check if the next TX descriptor is owned by the Ethernet DMA or
* CPU. We cannot perform the TX poll if we are unable to accept
* another packet for transmission.
*
* In a race condition, ETH_TDES0_OWN may be cleared BUT still not available
* because stm32_freeframe() has not yet run. If stm32_freeframe() has run,
* the buffer1 pointer (tdes2) will be nullified (and inflight should be <
* CONFIG_STM32_ETH_NTXDESC).
*/
if ((priv->txhead->tdes0 & ETH_TDES0_OWN) == 0 &&
priv->txhead->tdes2 == 0)
{
/* If we have the descriptor, then poll uIP for new XMIT data.
* Allocate a buffer for the poll.
*/
DEBUGASSERT(dev->d_len == 0 && dev->d_buf == NULL);
dev->d_buf = stm32_allocbuffer(priv);
/* We can't poll if we have no buffers */
if (dev->d_buf)
{
(void)uip_poll(dev, stm32_uiptxpoll);
/* We will, most likely end up with a buffer to be freed. But it
* might not be the same one that we allocated above.
*/
if (dev->d_buf)
{
DEBUGASSERT(dev->d_len == 0);
stm32_freebuffer(priv, dev->d_buf);
dev->d_buf = NULL;
}
}
}
}
/****************************************************************************
* Function: stm32_enableint
*
* Description:
* Enable a "normal" interrupt
*
* Parameters:
* priv - Reference to the driver state structure
*
* Returned Value:
* None
*
* Assumptions:
* Global interrupts are disabled by interrupt handling logic.
*
****************************************************************************/
static void stm32_enableint(FAR struct stm32_ethmac_s *priv, uint32_t ierbit)
{
uint32_t regval;
/* Enable the specified "normal" interrupt */
regval = stm32_getreg(STM32_ETH_DMAIER);
regval |= (ETH_DMAINT_NIS | ierbit);
stm32_putreg(regval, STM32_ETH_DMAIER);
}
/****************************************************************************
* Function: stm32_disableint
*
* Description:
* Disable a normal interrupt.
*
* Parameters:
* priv - Reference to the driver state structure
*
* Returned Value:
* None
*
* Assumptions:
* Global interrupts are disabled by interrupt handling logic.
*
****************************************************************************/
static void stm32_disableint(FAR struct stm32_ethmac_s *priv, uint32_t ierbit)
{
uint32_t regval;
/* Disable the "normal" interrupt */
regval = stm32_getreg(STM32_ETH_DMAIER);
regval &= ~ierbit;
/* Are all "normal" interrupts now disabled? */
if ((regval & ETH_DMAINT_NORMAL) == 0)
{
/* Yes.. disable normal interrupts */
regval &= ~ETH_DMAINT_NIS;
}
stm32_putreg(regval, STM32_ETH_DMAIER);
}
/****************************************************************************
* Function: stm32_freesegment
*
* Description:
* The function is called when a frame is received using the DMA receive
* interrupt. It scans the RX descriptors to the received frame.
*
* Parameters:
* priv - Reference to the driver state structure
*
* Returned Value:
* None
*
* Assumptions:
* Global interrupts are disabled by interrupt handling logic.
*
****************************************************************************/
static void stm32_freesegment(FAR struct stm32_ethmac_s *priv,
FAR struct eth_rxdesc_s *rxfirst, int segments)
{
struct eth_rxdesc_s *rxdesc;
int i;
nllvdbg("rxfirst: %p segments: %d\n", rxfirst, segments);
/* Set OWN bit in RX descriptors. This gives the buffers back to DMA */
rxdesc = rxfirst;
for (i = 0; i < segments; i++)
{
rxdesc->rdes0 = ETH_RDES0_OWN;
rxdesc = (struct eth_rxdesc_s *)rxdesc->rdes3;
}
/* Reset the segment managment logic */
priv->rxcurr = NULL;
priv->segments = 0;
/* Check if the RX Buffer unavailable flag is set */
if ((stm32_getreg(STM32_ETH_DMASR) & ETH_DMAINT_RBUI) != 0)
{
/* Clear RBUS Ethernet DMA flag */
stm32_putreg(ETH_DMAINT_RBUI, STM32_ETH_DMASR);
/* Resume DMA reception */
stm32_putreg(0, STM32_ETH_DMARPDR);
}
}
/****************************************************************************
* Function: stm32_recvframe
*
* Description:
* The function is called when a frame is received using the DMA receive
* interrupt. It scans the RX descriptors of the received frame.
*
* NOTE: This function will silently discard any packets containing errors.
*
* Parameters:
* priv - Reference to the driver state structure
*
* Returned Value:
* OK if a packet was successfully returned; -EAGAIN if there are no
* further packets available
*
* Assumptions:
* Global interrupts are disabled by interrupt handling logic.
*
****************************************************************************/
static int stm32_recvframe(FAR struct stm32_ethmac_s *priv)
{
struct eth_rxdesc_s *rxdesc;
struct eth_rxdesc_s *rxcurr;
uint8_t *buffer;
int i;
nllvdbg("rxhead: %p rxcurr: %p segments: %d\n",
priv->rxhead, priv->rxcurr, priv->segments);
/* Check if there are free buffers. We cannot receive new frames in this
* design unless there is at least one free buffer.
*/
if (!stm32_isfreebuffer(priv))
{
nlldbg("No free buffers\n");
return -ENOMEM;
}
/* Scan descriptors owned by the CPU. Scan until:
*
* 1) We find a descriptor still owned by the DMA,
* 2) We have examined all of the RX descriptors, or
* 3) All of the TX descriptors are in flight.
*
* This last case is obscure. It is due to that fact that each packet
* that we receive can generate an unstoppable transmisson. So we have
* to stop receiving when we can not longer transmit. In this case, the
* transmit logic should also have disabled further RX interrupts.
*/
rxdesc = priv->rxhead;
for (i = 0;
(rxdesc->rdes0 & ETH_RDES0_OWN) == 0 &&
i < CONFIG_STM32_ETH_NRXDESC &&
priv->inflight < CONFIG_STM32_ETH_NTXDESC;
i++)
{
/* Check if this is the first segment in the frame */
if ((rxdesc->rdes0 & ETH_RDES0_FS) != 0 &&
(rxdesc->rdes0 & ETH_RDES0_LS) == 0)
{
priv->rxcurr = rxdesc;
priv->segments = 1;
}
/* Check if this is an intermediate segment in the frame */
else if (((rxdesc->rdes0 & ETH_RDES0_LS) == 0)&&
((rxdesc->rdes0 & ETH_RDES0_FS) == 0))
{
priv->segments++;
}
/* Otherwise, it is the last segment in the frame */
else
{
priv->segments++;
/* Check if the there is only one segment in the frame */
if (priv->segments == 1)
{
rxcurr = rxdesc;
}
else
{
rxcurr = priv->rxcurr;
}
nllvdbg("rxhead: %p rxcurr: %p segments: %d\n",
priv->rxhead, priv->rxcurr, priv->segments);
/* Check if any errors are reported in the frame */
if ((rxdesc->rdes0 & ETH_RDES0_ES) == 0)
{
struct uip_driver_s *dev = &priv->dev;
/* Get the Frame Length of the received packet: substruct 4
* bytes of the CRC
*/
dev->d_len = ((rxdesc->rdes0 & ETH_RDES0_FL_MASK) >> ETH_RDES0_FL_SHIFT) - 4;
/* Get a buffer from the free list. We don't even check if
* this is successful because we already assure the free
* list is not empty above.
*/
buffer = stm32_allocbuffer(priv);
/* Take the buffer from the RX descriptor of the first free
* segment, put it into the uIP device structure, then replace
* the buffer in the RX descriptor with the newly allocated
* buffer.
*/
DEBUGASSERT(dev->d_buf == NULL);
dev->d_buf = (uint8_t*)rxcurr->rdes2;
rxcurr->rdes2 = (uint32_t)buffer;
/* Return success, remebering where we should re-start scanning
* and resetting the segment scanning logic
*/
priv->rxhead = (struct eth_rxdesc_s*)rxdesc->rdes3;
stm32_freesegment(priv, rxcurr, priv->segments);
nllvdbg("rxhead: %p d_buf: %p d_len: %d\n",
priv->rxhead, dev->d_buf, dev->d_len);
return OK;
}
else
{
/* Drop the frame that contains the errors, reset the segment
* scanning logic, and continue scanning with the next frame.
*/
nlldbg("DROPPED: RX descriptor errors: %08x\n", rxdesc->rdes0);
stm32_freesegment(priv, rxcurr, priv->segments);
}
}
/* Try the next descriptor */
rxdesc = (struct eth_rxdesc_s*)rxdesc->rdes3;
}
/* We get here after all of the descriptors have been scanned or when rxdesc points
* to the first descriptor owned by the DMA. Remember where we left off.
*/
priv->rxhead = rxdesc;
nllvdbg("rxhead: %p rxcurr: %p segments: %d\n",
priv->rxhead, priv->rxcurr, priv->segments);
return -EAGAIN;
}
/****************************************************************************
* Function: stm32_receive
*
* Description:
* An interrupt was received indicating the availability of a new RX packet
*
* Parameters:
* priv - Reference to the driver state structure
*
* Returned Value:
* None
*
* Assumptions:
* Global interrupts are disabled by interrupt handling logic.
*
****************************************************************************/
static void stm32_receive(FAR struct stm32_ethmac_s *priv)
{
struct uip_driver_s *dev = &priv->dev;
/* Loop while while stm32_recvframe() successfully retrieves valid
* Ethernet frames.
*/
while (stm32_recvframe(priv) == OK)
{
/* Check if the packet is a valid size for the uIP buffer configuration
* (this should not happen)
*/
if (dev->d_len > CONFIG_NET_BUFSIZE)
{
nlldbg("DROPPED: Too big: %d\n", dev->d_len);
}
/* We only accept IP packets of the configured type and ARP packets */
#ifdef CONFIG_NET_IPv6
else if (BUF->type == HTONS(UIP_ETHTYPE_IP6))
#else
else if (BUF->type == HTONS(UIP_ETHTYPE_IP))
#endif
{
nllvdbg("IP frame\n");
/* Handle ARP on input then give the IP packet to uIP */
uip_arp_ipin(&priv->dev);
uip_input(&priv->dev);
/* If the above function invocation resulted in data that should be
* sent out on the network, the field d_len will set to a value > 0.
*/
if (priv->dev.d_len > 0)
{
uip_arp_out(&priv->dev);
stm32_transmit(priv);
}
}
else if (BUF->type == htons(UIP_ETHTYPE_ARP))
{
nllvdbg("ARP frame\n");
/* Handle ARP packet */
uip_arp_arpin(&priv->dev);
/* If the above function invocation resulted in data that should be
* sent out on the network, the field d_len will set to a value > 0.
*/
if (priv->dev.d_len > 0)
{
stm32_transmit(priv);
}
}
else
{
nlldbg("DROPPED: Unknown type: %04x\n", BUF->type);
}
/* We are finished with the RX buffer. NOTE: If the buffer is
* re-used for transmission, the dev->d_buf field will have been
* nullified.
*/
if (dev->d_buf)
{
/* Free the receive packet buffer */
stm32_freebuffer(priv, dev->d_buf);
dev->d_buf = NULL;
dev->d_len = 0;
}
}
}
/****************************************************************************
* Function: stm32_freeframe
*
* Description:
* Scans the TX descriptors and frees the buffers of completed TX transfers.
*
* Parameters:
* priv - Reference to the driver state structure
*
* Returned Value:
* None.
*
* Assumptions:
* Global interrupts are disabled by interrupt handling logic.
*
****************************************************************************/
static void stm32_freeframe(FAR struct stm32_ethmac_s *priv)
{
struct eth_txdesc_s *txdesc;
int i;
nllvdbg("txhead: %p txtail: %p inflight: %d\n",
priv->txhead, priv->txtail, priv->inflight);
/* Scan for "in-flight" descriptors owned by the CPU */
txdesc = priv->txtail;
if (txdesc)
{
DEBUGASSERT(priv->inflight > 0);
for (i = 0; (txdesc->tdes0 & ETH_TDES0_OWN) == 0; i++)
{
/* There should be a buffer assigned to all in-flight
* TX descriptors.
*/
nllvdbg("txtail: %p tdes0: %08x tdes2: %08x tdes3: %08x\n",
txdesc, txdesc->tdes0, txdesc->tdes2, txdesc->tdes3);
DEBUGASSERT(txdesc->tdes2 != 0);
/* Check if this is the first segment of a TX frame. */
if ((txdesc->tdes0 & ETH_TDES0_FS) != 0)
{
/* Yes.. Free the buffer */
stm32_freebuffer(priv, (uint8_t*)txdesc->tdes2);
}
/* In any event, make sure that TDES2 is nullified. */
txdesc->tdes2 = 0;
/* Check if this is the last segement of a TX frame */
if ((txdesc->tdes0 & ETH_TDES0_LS) != 0)
{
/* Yes.. Decrement the number of frames "in-flight". */
priv->inflight--;
/* If all of the TX descriptors were in-flight, then RX interrupts
* may have been disabled... we can re-enable them now.
*/
stm32_enableint(priv, ETH_DMAINT_RI);
/* If there are no more frames in-flight, then bail. */
if (priv->inflight <= 0)
{
priv->txtail = NULL;
priv->inflight = 0;
return;
}
}
/* Try the next descriptor in the TX chain */
txdesc = (struct eth_txdesc_s*)txdesc->tdes3;
}
/* We get here if (1) there are still frames "in-flight". Remember
* where we left off.
*/
priv->txtail = txdesc;
nllvdbg("txhead: %p txtail: %p inflight: %d\n",
priv->txhead, priv->txtail, priv->inflight);
}
}
/****************************************************************************
* Function: stm32_txdone
*
* Description:
* An interrupt was received indicating that the last TX packet(s) is done
*
* Parameters:
* priv - Reference to the driver state structure
*
* Returned Value:
* None
*
* Assumptions:
* Global interrupts are disabled by the watchdog logic.
*
****************************************************************************/
static void stm32_txdone(FAR struct stm32_ethmac_s *priv)
{
DEBUGASSERT(priv->txtail != NULL);
/* Scan the TX desciptor change, returning buffers to free list */
stm32_freeframe(priv);
/* If no further xmits are pending, then cancel the TX timeout */
if (priv->inflight <= 0)
{
wd_cancel(priv->txtimeout);
/* And disable further TX interrupts. */
stm32_disableint(priv, ETH_DMAINT_TI);
}
/* Then poll uIP for new XMIT data */
stm32_dopoll(priv);
}
/****************************************************************************
* Function: stm32_interrupt
*
* Description:
* Hardware interrupt handler
*
* Parameters:
* irq - Number of the IRQ that generated the interrupt
* context - Interrupt register state save info (architecture-specific)
*
* Returned Value:
* OK on success
*
* Assumptions:
*
****************************************************************************/
static int stm32_interrupt(int irq, FAR void *context)
{
register FAR struct stm32_ethmac_s *priv = &g_stm32ethmac[0];
uint32_t dmasr;
/* Get the DMA interrupt status bits (no MAC interrupts are expected) */
dmasr = stm32_getreg(STM32_ETH_DMASR);
/* Mask only enabled interrupts. This depends on the fact that the interrupt
* related bits (0-16) correspond in these two registers.
*/
dmasr &= stm32_getreg(STM32_ETH_DMAIER);
/* Check if there are pending "normal" interrupts */
if ((dmasr & ETH_DMAINT_NIS) != 0)
{
/* Yes.. Check if we received an incoming packet, if so, call
* stm32_receive()
*/
if ((dmasr & ETH_DMAINT_RI) != 0)
{
/* Clear the pending receive interrupt */
stm32_putreg(ETH_DMAINT_RI, STM32_ETH_DMASR);
/* Handle the received package */
stm32_receive(priv);
}
/* Check if a packet transmission just completed. If so, call
* stm32_txdone(). This may disable further TX interrupts if there
* are no pending tansmissions.
*/
if ((dmasr & ETH_DMAINT_TI) != 0)
{
/* Clear the pending receive interrupt */
stm32_putreg(ETH_DMAINT_TI, STM32_ETH_DMASR);
/* Check if there are pending transmissions */
stm32_txdone(priv);
}
/* Clear the pending normal summary interrupt */
stm32_putreg(ETH_DMAINT_NIS, STM32_ETH_DMASR);
}
/* Handle error interrupt only if CONFIG_DEBUG_NET is eanbled */
#ifdef CONFIG_DEBUG_NET
/* Check if there are pending "anormal" interrupts */
if ((dmasr & ETH_DMAINT_AIS) != 0)
{
/* Just let the user know what happened */
nlldbg("Abormal event(s): %08x\n", dmasr);
/* Clear all pending abnormal events */
stm32_putreg(ETH_DMAINT_ABNORMAL, STM32_ETH_DMASR);
/* Clear the pending abnormal summary interrupt */
stm32_putreg(ETH_DMAINT_AIS, STM32_ETH_DMASR);
}
#endif
return OK;
}
/****************************************************************************
* Function: stm32_txtimeout
*
* Description:
* Our TX watchdog timed out. Called from the timer interrupt handler.
* The last TX never completed. Reset the hardware and start again.
*
* Parameters:
* argc - The number of available arguments
* arg - The first argument
*
* Returned Value:
* None
*
* Assumptions:
* Global interrupts are disabled by the watchdog logic.
*
****************************************************************************/
static void stm32_txtimeout(int argc, uint32_t arg, ...)
{
FAR struct stm32_ethmac_s *priv = (FAR struct stm32_ethmac_s *)arg;
nlldbg("Timeout!\n");
/* Then reset the hardware. Just take the interface down, then back
* up again.
*/
stm32_ifdown(&priv->dev);
stm32_ifup(&priv->dev);
/* Then poll uIP for new XMIT data */
stm32_dopoll(priv);
}
/****************************************************************************
* Function: stm32_polltimer
*
* Description:
* Periodic timer handler. Called from the timer interrupt handler.
*
* Parameters:
* argc - The number of available arguments
* arg - The first argument
*
* Returned Value:
* None
*
* Assumptions:
* Global interrupts are disabled by the watchdog logic.
*
****************************************************************************/
static void stm32_polltimer(int argc, uint32_t arg, ...)
{
FAR struct stm32_ethmac_s *priv = (FAR struct stm32_ethmac_s *)arg;
FAR struct uip_driver_s *dev = &priv->dev;
/* Check if the next TX descriptor is owned by the Ethernet DMA or CPU. We
* cannot perform the timer poll if we are unable to accept another packet
* for transmission. Hmmm.. might be bug here. Does this mean if there is
* a transmit in progress, we will miss TCP time state updates?
*
* In a race condition, ETH_TDES0_OWN may be cleared BUT still not available
* because stm32_freeframe() has not yet run. If stm32_freeframe() has run,
* the buffer1 pointer (tdes2) will be nullified (and inflight should be <
* CONFIG_STM32_ETH_NTXDESC).
*/
if ((priv->txhead->tdes0 & ETH_TDES0_OWN) == 0 &&
priv->txhead->tdes2 == 0)
{
/* If we have the descriptor, then perform the timer poll. Allocate a
* buffer for the poll.
*/
DEBUGASSERT(dev->d_len == 0 && dev->d_buf == NULL);
dev->d_buf = stm32_allocbuffer(priv);
/* We can't poll if we have no buffers */
if (dev->d_buf)
{
/* Update TCP timing states and poll uIP for new XMIT data.
*/
(void)uip_timer(dev, stm32_uiptxpoll, STM32_POLLHSEC);
/* We will, most likely end up with a buffer to be freed. But it
* might not be the same one that we allocated above.
*/
if (dev->d_buf)
{
DEBUGASSERT(dev->d_len == 0);
stm32_freebuffer(priv, dev->d_buf);
dev->d_buf = NULL;
}
}
}
/* Setup the watchdog poll timer again */
(void)wd_start(priv->txpoll, STM32_WDDELAY, stm32_polltimer, 1, arg);
}
/****************************************************************************
* Function: stm32_ifup
*
* Description:
* NuttX Callback: Bring up the Ethernet interface when an IP address is
* provided
*
* Parameters:
* dev - Reference to the NuttX driver state structure
*
* Returned Value:
* None
*
* Assumptions:
*
****************************************************************************/
static int stm32_ifup(struct uip_driver_s *dev)
{
FAR struct stm32_ethmac_s *priv = (FAR struct stm32_ethmac_s *)dev->d_private;
int ret;
ndbg("Bringing up: %d.%d.%d.%d\n",
dev->d_ipaddr & 0xff, (dev->d_ipaddr >> 8) & 0xff,
(dev->d_ipaddr >> 16) & 0xff, dev->d_ipaddr >> 24);
/* Configure the Ethernet interface for DMA operation. */
ret = stm32_ethconfig(priv);
if (ret < 0)
{
return ret;
}
/* Set and activate a timer process */
(void)wd_start(priv->txpoll, STM32_WDDELAY, stm32_polltimer, 1, (uint32_t)priv);
/* Enable the Ethernet interrupt */
priv->ifup = true;
up_enable_irq(STM32_IRQ_ETH);
stm32_checksetup();
return OK;
}
/****************************************************************************
* Function: stm32_ifdown
*
* Description:
* NuttX Callback: Stop the interface.
*
* Parameters:
* dev - Reference to the NuttX driver state structure
*
* Returned Value:
* None
*
* Assumptions:
*
****************************************************************************/
static int stm32_ifdown(struct uip_driver_s *dev)
{
FAR struct stm32_ethmac_s *priv = (FAR struct stm32_ethmac_s *)dev->d_private;
irqstate_t flags;
ndbg("Taking the network down\n");
/* Disable the Ethernet interrupt */
flags = irqsave();
up_disable_irq(STM32_IRQ_ETH);
/* Cancel the TX poll timer and TX timeout timers */
wd_cancel(priv->txpoll);
wd_cancel(priv->txtimeout);
/* Put the EMAC in its reset, non-operational state. This should be
* a known configuration that will guarantee the stm32_ifup() always
* successfully brings the interface back up.
*/
stm32_ethreset(priv);
/* Mark the device "down" */
priv->ifup = false;
irqrestore(flags);
return OK;
}
/****************************************************************************
* Function: stm32_txavail
*
* Description:
* Driver callback invoked when new TX data is available. This is a
* stimulus perform an out-of-cycle poll and, thereby, reduce the TX
* latency.
*
* Parameters:
* dev - Reference to the NuttX driver state structure
*
* Returned Value:
* None
*
* Assumptions:
* Called in normal user mode
*
****************************************************************************/
static int stm32_txavail(struct uip_driver_s *dev)
{
FAR struct stm32_ethmac_s *priv = (FAR struct stm32_ethmac_s *)dev->d_private;
irqstate_t flags;
nllvdbg("ifup: %d\n", priv->ifup);
/* Disable interrupts because this function may be called from interrupt
* level processing.
*/
flags = irqsave();
/* Ignore the notification if the interface is not yet up */
if (priv->ifup)
{
/* Poll uIP for new XMIT data */
stm32_dopoll(priv);
}
irqrestore(flags);
return OK;
}
/****************************************************************************
* Function: stm32_addmac
*
* Description:
* NuttX Callback: Add the specified MAC address to the hardware multicast
* address filtering
*
* Parameters:
* dev - Reference to the NuttX driver state structure
* mac - The MAC address to be added
*
* Returned Value:
* None
*
* Assumptions:
*
****************************************************************************/
#ifdef CONFIG_NET_IGMP
static int stm32_addmac(struct uip_driver_s *dev, FAR const uint8_t *mac)
{
FAR struct stm32_ethmac_s *priv = (FAR struct stm32_ethmac_s *)dev->d_private;
nllvdbg("MAC: %02x:%02x:%02x:%02x:%02x:%02x\n",
mac[0], mac[1], mac[2], mac[3], mac[4], mac[5]);
/* Add the MAC address to the hardware multicast routing table */
/* Add the MAC address to the hardware multicast routing table */
#error "Missing logic"
return OK;
}
#endif
/****************************************************************************
* Function: stm32_rmmac
*
* Description:
* NuttX Callback: Remove the specified MAC address from the hardware multicast
* address filtering
*
* Parameters:
* dev - Reference to the NuttX driver state structure
* mac - The MAC address to be removed
*
* Returned Value:
* None
*
* Assumptions:
*
****************************************************************************/
#ifdef CONFIG_NET_IGMP
static int stm32_rmmac(struct uip_driver_s *dev, FAR const uint8_t *mac)
{
FAR struct stm32_ethmac_s *priv = (FAR struct stm32_ethmac_s *)dev->d_private;
nllvdbg("MAC: %02x:%02x:%02x:%02x:%02x:%02x\n",
mac[0], mac[1], mac[2], mac[3], mac[4], mac[5]);
/* Add the MAC address to the hardware multicast routing table */
#error "Missing logic"
return OK;
}
#endif
/****************************************************************************
* Function: stm32_txdescinit
*
* Description:
* Initializes the DMA TX descriptors in chain mode.
*
* Parameters:
* priv - Reference to the driver state structure
*
* Returned Value:
* None
*
* Assumptions:
*
****************************************************************************/
static void stm32_txdescinit(FAR struct stm32_ethmac_s *priv)
{
struct eth_txdesc_s *txdesc;
int i;
/* priv->txhead will point to the first, available TX descriptor in the chain.
* Set the priv->txhead pointer to the first descriptor in the table.
*/
priv->txhead = priv->txtable;
/* priv->txtail will point to the first segment of the oldest pending
* "in-flight" TX transfer. NULL means that there are no active TX
* transfers.
*/
priv->txtail = NULL;
priv->inflight = 0;
/* Initialize each TX descriptor */
for (i = 0; i < CONFIG_STM32_ETH_NTXDESC; i++)
{
txdesc = &priv->txtable[i];
/* Set Second Address Chained bit */
txdesc->tdes0 = ETH_TDES0_TCH;
#ifdef CHECKSUM_BY_HARDWARE
/* Enable the checksum insertion for the TX frames */
txdesc->tdes0 |= ETH_TDES0_CIC_ALL;
#endif
/* Clear Buffer1 address pointer (buffers will be assigned as they
* are used)
*/
txdesc->tdes2 = 0;
/* Initialize the next descriptor with the Next Descriptor Polling Enable */
if (i < (CONFIG_STM32_ETH_NTXDESC-1))
{
/* Set next descriptor address register with next descriptor base
* address
*/
txdesc->tdes3 = (uint32_t)&priv->txtable[i+1];
}
else
{
/* For last descriptor, set next descriptor address register equal
* to the first descriptor base address
*/
txdesc->tdes3 = (uint32_t)priv->txtable;
}
}
/* Set Transmit Desciptor List Address Register */
stm32_putreg((uint32_t)priv->txtable, STM32_ETH_DMATDLAR);
}
/****************************************************************************
* Function: stm32_rxdescinit
*
* Description:
* Initializes the DMA RX descriptors in chain mode.
*
* Parameters:
* priv - Reference to the driver state structure
*
* Returned Value:
* None
*
* Assumptions:
*
****************************************************************************/
static void stm32_rxdescinit(FAR struct stm32_ethmac_s *priv)
{
struct eth_rxdesc_s *rxdesc;
int i;
/* priv->rxhead will point to the first, RX descriptor in the chain.
* This will be where we receive the first incomplete frame.
*/
priv->rxhead = priv->rxtable;
/* If we accumulate the frame in segments, priv->rxcurr points to the
* RX descriptor of the first segment in the current TX frame.
*/
priv->rxcurr = NULL;
priv->segments = 0;
/* Initialize each TX descriptor */
for (i = 0; i < CONFIG_STM32_ETH_NRXDESC; i++)
{
rxdesc = &priv->rxtable[i];
/* Set Own bit of the RX descriptor rdes0 */
rxdesc->rdes0 = ETH_RDES0_OWN;
/* Set Buffer1 size and Second Address Chained bit and enabled DMA
* RX desc receive interrupt
*/
rxdesc->rdes1 = ETH_RDES1_RCH | (uint32_t)CONFIG_STM32_ETH_BUFSIZE;
/* Set Buffer1 address pointer */
rxdesc->rdes2 = (uint32_t)&priv->rxbuffer[i*CONFIG_STM32_ETH_BUFSIZE];
/* Initialize the next descriptor with the Next Descriptor Polling Enable */
if (i < (CONFIG_STM32_ETH_NRXDESC-1))
{
/* Set next descriptor address register with next descriptor base
* address
*/
rxdesc->rdes3 = (uint32_t)&priv->rxtable[i+1];
}
else
{
/* For last descriptor, set next descriptor address register equal
* to the first descriptor base address
*/
rxdesc->rdes3 = (uint32_t)priv->rxtable;
}
}
/* Set Receive Descriptor List Address Register */
stm32_putreg((uint32_t)priv->rxtable, STM32_ETH_DMARDLAR);
}
/****************************************************************************
* Function: stm32_phyread
*
* Description:
* Read a PHY register.
*
* Parameters:
* phydevaddr - The PHY device address
* phyregaddr - The PHY register address
* value - The location to return the 16-bit PHY register value.
*
* Returned Value:
* OK on success; Negated errno on failure.
*
* Assumptions:
*
****************************************************************************/
static int stm32_phyread(uint16_t phydevaddr, uint16_t phyregaddr, uint16_t *value)
{
volatile uint32_t timeout;
uint32_t regval;
/* Configure the MACMIIAR register, preserving CSR Clock Range CR[2:0] bits */
regval = stm32_getreg(STM32_ETH_MACMIIAR);
regval &= ETH_MACMIIAR_CR_MASK;
/* Set the PHY device address, PHY register address, and set the buy bit.
* the ETH_MACMIIAR_MW is clear, indicating a read operation.
*/
regval |= (((uint32_t)phydevaddr << ETH_MACMIIAR_PA_SHIFT) & ETH_MACMIIAR_PA_MASK);
regval |= (((uint32_t)phyregaddr << ETH_MACMIIAR_MR_SHIFT) & ETH_MACMIIAR_MR_MASK);
regval |= ETH_MACMIIAR_MB;
stm32_putreg(regval, STM32_ETH_MACMIIAR);
/* Wait for the transfer to complete */
for (timeout = 0; timeout < PHY_READ_TIMEOUT; timeout++)
{
if ((stm32_getreg(STM32_ETH_MACMIIAR) & ETH_MACMIIAR_MB) == 0)
{
*value = (uint16_t)stm32_getreg(STM32_ETH_MACMIIDR);
return OK;
}
}
ndbg("MII transfer timed out: phydevaddr: %04x phyregaddr: %04x\n",
phydevaddr, phyregaddr);
return -ETIMEDOUT;
}
/****************************************************************************
* Function: stm32_phywrite
*
* Description:
* Write to a PHY register.
*
* Parameters:
* phydevaddr - The PHY device address
* phyregaddr - The PHY register address
* value - The 16-bit value to write to the PHY register value.
*
* Returned Value:
* OK on success; Negated errno on failure.
*
* Assumptions:
*
****************************************************************************/
static int stm32_phywrite(uint16_t phydevaddr, uint16_t phyregaddr, uint16_t value)
{
volatile uint32_t timeout;
uint32_t regval;
/* Configure the MACMIIAR register, preserving CSR Clock Range CR[2:0] bits */
regval = stm32_getreg(STM32_ETH_MACMIIAR);
regval &= ETH_MACMIIAR_CR_MASK;
/* Set the PHY device address, PHY register address, and set the busy bit.
* the ETH_MACMIIAR_MW is set, indicating a write operation.
*/
regval |= (((uint32_t)phydevaddr << ETH_MACMIIAR_PA_SHIFT) & ETH_MACMIIAR_PA_MASK);
regval |= (((uint32_t)phyregaddr << ETH_MACMIIAR_MR_SHIFT) & ETH_MACMIIAR_MR_MASK);
regval |= (ETH_MACMIIAR_MB | ETH_MACMIIAR_MW);
/* Write the value into the MACIIDR register before setting the new MACMIIAR
* register value.
*/
stm32_putreg(value, STM32_ETH_MACMIIDR);
stm32_putreg(regval, STM32_ETH_MACMIIAR);
/* Wait for the transfer to complete */
for (timeout = 0; timeout < PHY_WRITE_TIMEOUT; timeout++)
{
if ((stm32_getreg(STM32_ETH_MACMIIAR) & ETH_MACMIIAR_MB) == 0)
{
return OK;
}
}
ndbg("MII transfer timed out: phydevaddr: %04x phyregaddr: %04x value: %04x\n",
phydevaddr, phyregaddr, value);
return -ETIMEDOUT;
}
/****************************************************************************
* Function: stm32_dm9161
*
* Description:
* Special workaround for the Davicom DM9161 PHY is required. On power,
* up, the PHY is not usually configured correctly but will work after
* a powered-up reset. This is really a workaround for some more
* fundamental issue with the PHY clocking initialization, but the
* root cause has not been studied (nor will it be with this workaround).
*
* Parameters:
* priv - A reference to the private driver state structure
*
* Returned Value:
* None
*
****************************************************************************/
#ifdef CONFIG_PHY_DM9161
static inline int stm32_dm9161(FAR struct stm32_ethmac_s *priv)
{
uint16_t phyval;
int ret;
/* Read the PHYID1 register; A failure to read the PHY ID is one
* indication that check if the DM9161 PHY CHIP is not ready.
*/
ret = stm32_phyread(CONFIG_STM32_PHYADDR, MII_PHYID1, &phyval);
if (ret < 0)
{
ndbg("Failed to read the PHY ID1: %d\n", ret);
return ret;
}
/* If we failed to read the PHY ID1 register, the reset the MCU to recover */
else if (phyval == 0xffff)
{
up_systemreset();
}
nvdbg("PHY ID1: 0x%04X\n", phyval);
/* Now check the "DAVICOM Specified Configuration Register (DSCR)", Register 16 */
ret = stm32_phyread(CONFIG_STM32_PHYADDR, 16, &phyval);
if (ret < 0)
{
ndbg("Failed to read the PHY Register 0x10: %d\n", ret);
return ret;
}
/* Bit 8 of the DSCR register is zero, then the DM9161 has not selected RMII.
* If RMII is not selected, then reset the MCU to recover.
*/
else if ((phyval & (1 << 8)) == 0)
{
up_systemreset();
}
return OK;
}
#endif
/****************************************************************************
* Function: stm32_phyinit
*
* Description:
* Configure the PHY and determine the link speed/duplex.
*
* Parameters:
* priv - A reference to the private driver state structure
*
* Returned Value:
* OK on success; Negated errno on failure.
*
* Assumptions:
*
****************************************************************************/
static int stm32_phyinit(FAR struct stm32_ethmac_s *priv)
{
volatile uint32_t timeout;
uint32_t regval;
uint16_t phyval;
int ret;
/* Assume 10MBps and half duplex */
priv->mbps100 = 0;
priv->fduplex = 0;
/* Setup up PHY clocking by setting the SR field in the MACMIIAR register */
regval = stm32_getreg(STM32_ETH_MACMIIAR);
regval &= ~ETH_MACMIIAR_CR_MASK;
regval |= ETH_MACMIIAR_CR;
stm32_putreg(regval, STM32_ETH_MACMIIAR);
/* Put the PHY in reset mode */
ret = stm32_phywrite(CONFIG_STM32_PHYADDR, MII_MCR, MII_MCR_RESET);
if (ret < 0)
{
ndbg("Failed to reset the PHY: %d\n", ret);
return ret;
}
up_mdelay(PHY_RESET_DELAY);
/* Perform any necessary, board-specific PHY initialization */
#ifdef CONFIG_STM32_PHYINIT
ret = stm32_phy_boardinitialize(0);
if (ret < 0)
{
ndbg("Failed to initialize the PHY: %d\n", ret);
return ret;
}
#endif
/* Special workaround for the Davicom DM9161 PHY is required. */
#ifdef CONFIG_PHY_DM9161
ret = stm32_dm9161(priv);
if (ret < 0)
{
return ret;
}
#endif
/* Perform auto-negotion if so configured */
#ifdef CONFIG_STM32_AUTONEG
/* Wait for link status */
for (timeout = 0; timeout < PHY_RETRY_TIMEOUT; timeout++)
{
ret = stm32_phyread(CONFIG_STM32_PHYADDR, MII_MSR, &phyval);
if (ret < 0)
{
ndbg("Failed to read the PHY MSR: %d\n", ret);
return ret;
}
else if ((phyval & MII_MSR_LINKSTATUS) != 0)
{
break;
}
}
if (timeout >= PHY_RETRY_TIMEOUT)
{
ndbg("Timed out waiting for link status: %04x\n", phyval);
return -ETIMEDOUT;
}
/* Enable auto-gegotiation */
ret = stm32_phywrite(CONFIG_STM32_PHYADDR, MII_MCR, MII_MCR_ANENABLE);
if (ret < 0)
{
ndbg("Failed to enable auto-negotiation: %d\n", ret);
return ret;
}
/* Wait until auto-negotiation completes */
for (timeout = 0; timeout < PHY_RETRY_TIMEOUT; timeout++)
{
ret = stm32_phyread(CONFIG_STM32_PHYADDR, MII_MSR, &phyval);
if (ret < 0)
{
ndbg("Failed to read the PHY MSR: %d\n", ret);
return ret;
}
else if ((phyval & MII_MSR_ANEGCOMPLETE) != 0)
{
break;
}
}
if (timeout >= PHY_RETRY_TIMEOUT)
{
ndbg("Timed out waiting for auto-negotiation\n");
return -ETIMEDOUT;
}
/* Read the result of the auto-negotiation from the PHY-specific register */
ret = stm32_phyread(CONFIG_STM32_PHYADDR, CONFIG_STM32_PHYSR, &phyval);
if (ret < 0)
{
ndbg("Failed to read PHY status register\n");
return ret;
}
/* Remember the selected speed and duplex modes */
nvdbg("PHYSR[%d]: %04x\n", CONFIG_STM32_PHYSR, phyval);
/* Different PHYs present speed and mode information in different ways. IF
* This CONFIG_STM32_PHYSR_ALTCONFIG is selected, this indicates that the PHY
* represents speed and mode information are combined, for example, with
* separate bits for 10HD, 100HD, 10FD and 100FD.
*/
#ifdef CONFIG_STM32_PHYSR_ALTCONFIG
switch (phyval & CONFIG_STM32_PHYSR_ALTMODE)
{
default:
case CONFIG_STM32_PHYSR_10HD:
priv->fduplex = 0;
priv->mbps100 = 0;
break;
case CONFIG_STM32_PHYSR_100HD:
priv->fduplex = 0;
priv->mbps100 = 1;
break;
case CONFIG_STM32_PHYSR_10FD:
priv->fduplex = 1;
priv->mbps100 = 0;
break;
case CONFIG_STM32_PHYSR_100FD:
priv->fduplex = 1;
priv->mbps100 = 1;
break;
}
/* Different PHYs present speed and mode information in different ways. Some
* will present separate information for speed and mode (this is the default).
* Those PHYs, for example, may provide a 10/100 Mbps indication and a separate
* full/half duplex indication.
*/
#else
if ((phyval & CONFIG_STM32_PHYSR_MODE) == CONFIG_STM32_PHYSR_FULLDUPLEX)
{
priv->fduplex = 1;
}
if ((phyval & CONFIG_STM32_PHYSR_SPEED) == CONFIG_STM32_PHYSR_100MBPS)
{
priv->mbps100 = 1;
}
#endif
#else /* Auto-negotion not selected */
phyval = 0;
#ifdef CONFIG_STM32_ETHFD
phyval |= MII_MCR_FULLDPLX;
#endif
#ifdef CONFIG_STM32_ETH100MBPS
phyval |= MII_MCR_SPEED100;
#endif
ret = stm32_phywrite(CONFIG_STM32_PHYADDR, MII_MCR, phyval);
if (ret < 0)
{
ndbg("Failed to write the PHY MCR: %d\n", ret);
return ret;
}
up_mdelay(PHY_CONFIG_DELAY);
/* Remember the selected speed and duplex modes */
#ifdef CONFIG_STM32_ETHFD
priv->fduplex = 1;
#endif
#ifdef CONFIG_STM32_ETH100MBPS
priv->mbps100 = 1;
#endif
#endif
ndbg("Duplex: %s Speed: %d MBps\n",
priv->fduplex ? "FULL" : "HALF",
priv->mbps100 ? 100 : 10);
return OK;
}
/************************************************************************************
* Name: stm32_selectmii
*
* Description:
* Selects the MII inteface.
*
* Input Parameters:
* None
*
* Returned Value:
* None
*
************************************************************************************/
#ifdef CONFIG_STM32_MII
static inline void stm32_selectmii(void)
{
uint32_t regval;
#ifdef CONFIG_STM32_CONNECTIVITYLINE
regval = getreg32(STM32_AFIO_MAPR);
regval &= ~AFIO_MAPR_MII_RMII_SEL;
putreg32(regval, STM32_AFIO_MAPR);
#else
regval = getreg32(STM32_SYSCFG_PMC);
regval &= ~SYSCFG_PMC_MII_RMII_SEL;
putreg32(regval, STM32_SYSCFG_PMC);
#endif
}
#endif
/************************************************************************************
* Name: stm32_selectrmii
*
* Description:
* Selects the RMII inteface.
*
* Input Parameters:
* None
*
* Returned Value:
* None
*
************************************************************************************/
static inline void stm32_selectrmii(void)
{
uint32_t regval;
#ifdef CONFIG_STM32_CONNECTIVITYLINE
regval = getreg32(STM32_AFIO_MAPR);
regval |= AFIO_MAPR_MII_RMII_SEL;
putreg32(regval, STM32_AFIO_MAPR);
#else
regval = getreg32(STM32_SYSCFG_PMC);
regval |= SYSCFG_PMC_MII_RMII_SEL;
putreg32(regval, STM32_SYSCFG_PMC);
#endif
}
/****************************************************************************
* Function: stm32_ethgpioconfig
*
* Description:
* Configure GPIOs for the Ethernet interface.
*
* Parameters:
* priv - A reference to the private driver state structure
*
* Returned Value:
* None.
*
* Assumptions:
*
****************************************************************************/
static inline void stm32_ethgpioconfig(FAR struct stm32_ethmac_s *priv)
{
/* Configure GPIO pins to support Ethernet */
#if defined(CONFIG_STM32_MII) || defined(CONFIG_STM32_RMII)
/* MDC and MDIO are common to both modes */
stm32_configgpio(GPIO_ETH_MDC);
stm32_configgpio(GPIO_ETH_MDIO);
/* Set up the MII interface */
#if defined(CONFIG_STM32_MII)
/* Select the MII interface */
stm32_selectmii();
/* Provide clocking via MCO, MCO1 or MCO2:
*
* "MCO1 (microcontroller clock output), used to output HSI, LSE, HSE or PLL
* clock (through a configurable prescaler) on PA8 pin."
*
* "MCO2 (microcontroller clock output), used to output HSE, PLL, SYSCLK or
* PLLI2S clock (through a configurable prescaler) on PC9 pin."
*/
# if defined(CONFIG_STM32_MII_MCO1)
/* Configure MC01 to drive the PHY. Board logic must provide MC01 clocking
* info.
*/
stm32_configgpio(GPIO_MCO1);
stm32_mco1config(BOARD_CFGR_MC01_SOURCE, BOARD_CFGR_MC01_DIVIDER);
# elif defined(CONFIG_STM32_MII_MCO2)
/* Configure MC02 to drive the PHY. Board logic must provide MC02 clocking
* info.
*/
stm32_configgpio(GPIO_MCO2);
stm32_mco2config(BOARD_CFGR_MC02_SOURCE, BOARD_CFGR_MC02_DIVIDER);
# elif defined(CONFIG_STM32_MII_MCO)
/* Setup MCO pin for alternative usage */
stm32_configgpio(GPIO_MCO);
stm32_mcoconfig(BOARD_CFGR_MCO_SOURCE);
# endif
/* MII interface pins (17):
*
* MII_TX_CLK, MII_TXD[3:0], MII_TX_EN, MII_RX_CLK, MII_RXD[3:0], MII_RX_ER,
* MII_RX_DV, MII_CRS, MII_COL, MDC, MDIO
*/
stm32_configgpio(GPIO_ETH_MII_COL);
stm32_configgpio(GPIO_ETH_MII_CRS);
stm32_configgpio(GPIO_ETH_MII_RXD0);
stm32_configgpio(GPIO_ETH_MII_RXD1);
stm32_configgpio(GPIO_ETH_MII_RXD2);
stm32_configgpio(GPIO_ETH_MII_RXD3);
stm32_configgpio(GPIO_ETH_MII_RX_CLK);
stm32_configgpio(GPIO_ETH_MII_RX_DV);
stm32_configgpio(GPIO_ETH_MII_RX_ER);
stm32_configgpio(GPIO_ETH_MII_TXD0);
stm32_configgpio(GPIO_ETH_MII_TXD1);
stm32_configgpio(GPIO_ETH_MII_TXD2);
stm32_configgpio(GPIO_ETH_MII_TXD3);
stm32_configgpio(GPIO_ETH_MII_TX_CLK);
stm32_configgpio(GPIO_ETH_MII_TX_EN);
/* Set up the RMII interface. */
#elif defined(CONFIG_STM32_RMII)
/* Select the RMII interface */
stm32_selectrmii();
/* Provide clocking via MCO, MCO1 or MCO2:
*
* "MCO1 (microcontroller clock output), used to output HSI, LSE, HSE or PLL
* clock (through a configurable prescaler) on PA8 pin."
*
* "MCO2 (microcontroller clock output), used to output HSE, PLL, SYSCLK or
* PLLI2S clock (through a configurable prescaler) on PC9 pin."
*/
# if defined(CONFIG_STM32_RMII_MCO1)
/* Configure MC01 to drive the PHY. Board logic must provide MC01 clocking
* info.
*/
stm32_configgpio(GPIO_MCO1);
stm32_mco1config(BOARD_CFGR_MC01_SOURCE, BOARD_CFGR_MC01_DIVIDER);
# elif defined(CONFIG_STM32_RMII_MCO2)
/* Configure MC02 to drive the PHY. Board logic must provide MC02 clocking
* info.
*/
stm32_configgpio(GPIO_MCO2);
stm32_mco2config(BOARD_CFGR_MC02_SOURCE, BOARD_CFGR_MC02_DIVIDER);
# elif defined(CONFIG_STM32_RMII_MCO)
/* Setup MCO pin for alternative usage */
stm32_configgpio(GPIO_MCO);
stm32_mcoconfig(BOARD_CFGR_MCO_SOURCE);
# endif
/* RMII interface pins (7):
*
* RMII_TXD[1:0], RMII_TX_EN, RMII_RXD[1:0], RMII_CRS_DV, MDC, MDIO,
* RMII_REF_CLK
*/
stm32_configgpio(GPIO_ETH_RMII_CRS_DV);
stm32_configgpio(GPIO_ETH_RMII_REF_CLK);
stm32_configgpio(GPIO_ETH_RMII_RXD0);
stm32_configgpio(GPIO_ETH_RMII_RXD1);
stm32_configgpio(GPIO_ETH_RMII_TXD0);
stm32_configgpio(GPIO_ETH_RMII_TXD1);
/* stm32_configgpio(GPIO_ETH_RMII_TX_CLK); not needed? */
stm32_configgpio(GPIO_ETH_RMII_TX_EN);
#endif
#endif
/* Enable pulse-per-second (PPS) output signal */
stm32_configgpio(GPIO_ETH_PPS_OUT);
}
/****************************************************************************
* Function: stm32_ethreset
*
* Description:
* Reset the Ethernet block.
*
* Parameters:
* priv - A reference to the private driver state structure
*
* Returned Value:
* None.
*
* Assumptions:
*
****************************************************************************/
static void stm32_ethreset(FAR struct stm32_ethmac_s *priv)
{
uint32_t regval;
/* Reset the Ethernet on the AHB bus (F1 Connectivity Line) or AHB1 bus (F2
* and F4)
*/
#if defined(CONFIG_STM32_CONNECTIVITYLINE)
regval = stm32_getreg(STM32_RCC_AHBRSTR);
regval |= RCC_AHBRSTR_ETHMACRST;
stm32_putreg(regval, STM32_RCC_AHBRSTR);
regval &= ~RCC_AHBRSTR_ETHMACRST;
stm32_putreg(regval, STM32_RCC_AHBRSTR);
#else
regval = stm32_getreg(STM32_RCC_AHB1RSTR);
regval |= RCC_AHB1RSTR_ETHMACRST;
stm32_putreg(regval, STM32_RCC_AHB1RSTR);
regval &= ~RCC_AHB1RSTR_ETHMACRST;
stm32_putreg(regval, STM32_RCC_AHB1RSTR);
#endif
/* Perform a software reset by setting the SR bit in the DMABMR register.
* This Resets all MAC subsystem internal registers and logic. After this
* reset all the registers holds their reset values.
*/
regval = stm32_getreg(STM32_ETH_DMABMR);
regval |= ETH_DMABMR_SR;
stm32_putreg(regval, STM32_ETH_DMABMR);
/* Wait for software reset to complete. The SR bit is cleared automatically
* after the reset operation has completed in all of the core clock domains.
*/
while ((stm32_getreg(STM32_ETH_DMABMR) & ETH_DMABMR_SR) != 0);
}
/****************************************************************************
* Function: stm32_macconfig
*
* Description:
* Configure the Ethernet MAC for DMA operation.
*
* Parameters:
* priv - A reference to the private driver state structure
*
* Returned Value:
* OK on success; Negated errno on failure.
*
* Assumptions:
*
****************************************************************************/
static int stm32_macconfig(FAR struct stm32_ethmac_s *priv)
{
uint32_t regval;
/* Set up the MACCR register */
regval = stm32_getreg(STM32_ETH_MACCR);
regval &= ~MACCR_CLEAR_BITS;
regval |= MACCR_SET_BITS;
if (priv->fduplex)
{
/* Set the DM bit for full duplex support */
regval |= ETH_MACCR_DM;
}
if (priv->mbps100)
{
/* Set the FES bit for 100Mbps fast ethernet support */
regval |= ETH_MACCR_FES;
}
stm32_putreg(regval, STM32_ETH_MACCR);
/* Set up the MACFFR register */
regval = stm32_getreg(STM32_ETH_MACFFR);
regval &= ~MACFFR_CLEAR_BITS;
regval |= MACFFR_SET_BITS;
stm32_putreg(regval, STM32_ETH_MACFFR);
/* Set up the MACHTHR and MACHTLR registers */
stm32_putreg(0, STM32_ETH_MACHTHR);
stm32_putreg(0, STM32_ETH_MACHTLR);
/* Setup up the MACFCR register */
regval = stm32_getreg(STM32_ETH_MACFCR);
regval &= ~MACFCR_CLEAR_MASK;
regval |= MACFCR_SET_MASK;
stm32_putreg(regval, STM32_ETH_MACFCR);
/* Setup up the MACVLANTR register */
stm32_putreg(0, STM32_ETH_MACVLANTR);
/* DMA Configuration */
/* Set up the DMAOMR register */
regval = stm32_getreg(STM32_ETH_DMAOMR);
regval &= ~DMAOMR_CLEAR_MASK;
regval |= DMAOMR_SET_MASK;
stm32_putreg(regval, STM32_ETH_DMAOMR);
/* Set up the DMABMR register */
regval = stm32_getreg(STM32_ETH_DMABMR);
regval &= ~DMABMR_CLEAR_MASK;
regval |= DMABMR_SET_MASK;
stm32_putreg(regval, STM32_ETH_DMABMR);
return OK;
}
/****************************************************************************
* Function: stm32_macaddress
*
* Description:
* Configure the selected MAC address.
*
* Parameters:
* priv - A reference to the private driver state structure
*
* Returned Value:
* OK on success; Negated errno on failure.
*
* Assumptions:
*
****************************************************************************/
static void stm32_macaddress(FAR struct stm32_ethmac_s *priv)
{
FAR struct uip_driver_s *dev = &priv->dev;
uint32_t regval;
nllvdbg("%s MAC: %02x:%02x:%02x:%02x:%02x:%02x\n",
dev->d_ifname,
dev->d_mac.ether_addr_octet[0], dev->d_mac.ether_addr_octet[1],
dev->d_mac.ether_addr_octet[2], dev->d_mac.ether_addr_octet[3],
dev->d_mac.ether_addr_octet[4], dev->d_mac.ether_addr_octet[5]);
/* Set the MAC address high register */
regval = ((uint32_t)dev->d_mac.ether_addr_octet[5] << 8) |
(uint32_t)dev->d_mac.ether_addr_octet[4];
stm32_putreg(regval, STM32_ETH_MACA0HR);
/* Set the MAC address low register */
regval = ((uint32_t)dev->d_mac.ether_addr_octet[3] << 24) |
((uint32_t)dev->d_mac.ether_addr_octet[2] << 16) |
((uint32_t)dev->d_mac.ether_addr_octet[1] << 8) |
(uint32_t)dev->d_mac.ether_addr_octet[0];
stm32_putreg(regval, STM32_ETH_MACA0LR);
}
/****************************************************************************
* Function: stm32_macenable
*
* Description:
* Enable normal MAC operation.
*
* Parameters:
* priv - A reference to the private driver state structure
*
* Returned Value:
* OK on success; Negated errno on failure.
*
* Assumptions:
*
****************************************************************************/
static int stm32_macenable(FAR struct stm32_ethmac_s *priv)
{
uint32_t regval;
/* Set the MAC address */
stm32_macaddress(priv);
/* Enable transmit state machine of the MAC for transmission on the MII */
regval = stm32_getreg(STM32_ETH_MACCR);
regval |= ETH_MACCR_TE;
stm32_putreg(regval, STM32_ETH_MACCR);
/* Flush Transmit FIFO */
regval = stm32_getreg(STM32_ETH_DMAOMR);
regval |= ETH_DMAOMR_FTF;
stm32_putreg(regval, STM32_ETH_DMAOMR);
/* Enable receive state machine of the MAC for reception from the MII */
/* Enables or disables the MAC reception. */
regval = stm32_getreg(STM32_ETH_MACCR);
regval |= ETH_MACCR_RE;
stm32_putreg(regval, STM32_ETH_MACCR);
/* Start DMA transmission */
regval = stm32_getreg(STM32_ETH_DMAOMR);
regval |= ETH_DMAOMR_ST;
stm32_putreg(regval, STM32_ETH_DMAOMR);
/* Start DMA reception */
regval = stm32_getreg(STM32_ETH_DMAOMR);
regval |= ETH_DMAOMR_SR;
stm32_putreg(regval, STM32_ETH_DMAOMR);
/* Enable Ethernet DMA interrupts.
*
* The STM32 hardware supports two interrupts: (1) one dedicated to normal
* Ethernet operations and the other, used only for the Ethernet wakeup
* event. The wake-up interrupt is not used by this driver.
*
* The first Ethernet vector is reserved for interrupts generated by the
* MAC and the DMA. The MAC provides PMT and time stamp trigger interrupts,
* neither of which are used by this driver.
*/
stm32_putreg(ETH_MACIMR_ALLINTS, STM32_ETH_MACIMR);
/* Ethernet DMA supports two classes of interrupts: Normal interrupt
* summary (NIS) and Abnormal interrupt summary (AIS) with a variety
* individual normal and abnormal interrupting events. Here only
* the normal receive event is enabled (unless DEBUG is enabled). Transmit
* events will only be enabled when a transmit interrupt is expected.
*/
stm32_putreg((ETH_DMAINT_RECV_ENABLE | ETH_DMAINT_ERROR_ENABLE), STM32_ETH_DMAIER);
return OK;
}
/****************************************************************************
* Function: stm32_ethconfig
*
* Description:
* Configure the Ethernet interface for DMA operation.
*
* Parameters:
* priv - A reference to the private driver state structure
*
* Returned Value:
* OK on success; Negated errno on failure.
*
* Assumptions:
*
****************************************************************************/
static int stm32_ethconfig(FAR struct stm32_ethmac_s *priv)
{
int ret;
/* NOTE: The Ethernet clocks were initialized early in the boot-up
* sequence in stm32_rcc.c.
*/
/* Reset the Ethernet block */
nllvdbg("Reset the Ethernet block\n");
stm32_ethreset(priv);
/* Initialize the PHY */
nllvdbg("Initialize the PHY\n");
ret = stm32_phyinit(priv);
if (ret < 0)
{
return ret;
}
/* Initialize the MAC and DMA */
nllvdbg("Initialize the MAC and DMA\n");
ret = stm32_macconfig(priv);
if (ret < 0)
{
return ret;
}
/* Initialize the free buffer list */
stm32_initbuffer(priv);
/* Initialize TX Descriptors list: Chain Mode */
stm32_txdescinit(priv);
/* Initialize RX Descriptors list: Chain Mode */
stm32_rxdescinit(priv);
/* Enable normal MAC operation */
nllvdbg("Enable normal operation\n");
return stm32_macenable(priv);
}
/****************************************************************************
* Public Functions
****************************************************************************/
/****************************************************************************
* Function: stm32_ethinitialize
*
* Description:
* Initialize the Ethernet driver for one interface. If the STM32 chip
* supports multiple Ethernet controllers, then board specific logic
* must implement up_netinitialize() and call this function to initialize
* the desired interfaces.
*
* Parameters:
* intf - In the case where there are multiple EMACs, this value
* identifies which EMAC is to be initialized.
*
* Returned Value:
* OK on success; Negated errno on failure.
*
* Assumptions:
*
****************************************************************************/
#if STM32_NETHERNET == 1
static inline
#endif
int stm32_ethinitialize(int intf)
{
struct stm32_ethmac_s *priv;
nvdbg("intf: %d\n", intf);
/* Get the interface structure associated with this interface number. */
DEBUGASSERT(intf < STM32_NETHERNET);
priv = &g_stm32ethmac[intf];
/* Initialize the driver structure */
memset(priv, 0, sizeof(struct stm32_ethmac_s));
priv->dev.d_ifup = stm32_ifup; /* I/F up (new IP address) callback */
priv->dev.d_ifdown = stm32_ifdown; /* I/F down callback */
priv->dev.d_txavail = stm32_txavail; /* New TX data callback */
#ifdef CONFIG_NET_IGMP
priv->dev.d_addmac = stm32_addmac; /* Add multicast MAC address */
priv->dev.d_rmmac = stm32_rmmac; /* Remove multicast MAC address */
#endif
priv->dev.d_private = (void*)g_stm32ethmac; /* Used to recover private state from dev */
/* Create a watchdog for timing polling for and timing of transmisstions */
priv->txpoll = wd_create(); /* Create periodic poll timer */
priv->txtimeout = wd_create(); /* Create TX timeout timer */
/* Configure GPIO pins to support Ethernet */
stm32_ethgpioconfig(priv);
/* Attach the IRQ to the driver */
if (irq_attach(STM32_IRQ_ETH, stm32_interrupt))
{
/* We could not attach the ISR to the interrupt */
return -EAGAIN;
}
/* Put the interface in the down state. */
stm32_ifdown(&priv->dev);
/* Register the device with the OS so that socket IOCTLs can be performed */
(void)netdev_register(&priv->dev);
return OK;
}
/****************************************************************************
* Function: up_netinitialize
*
* Description:
* This is the "standard" network initialization logic called from the
* low-level initialization logic in up_initialize.c. If STM32_NETHERNET
* greater than one, then board specific logic will have to supply a
* version of up_netinitialize() that calls stm32_ethinitialize() with
* the appropriate interface number.
*
* Parameters:
* None.
*
* Returned Value:
* None.
*
* Assumptions:
*
****************************************************************************/
#if STM32_NETHERNET == 1
void up_netinitialize(void)
{
(void)stm32_ethinitialize(0);
}
#endif
#endif /* STM32_NETHERNET > 0 */
#endif /* CONFIG_NET && CONFIG_STM32_ETHMAC */
|