1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
51
52
53
54
55
56
57
58
59
60
61
62
63
64
65
66
67
68
69
70
71
72
73
74
75
76
77
78
79
80
81
82
83
84
85
86
87
88
89
90
91
92
93
94
95
96
97
98
99
100
101
102
103
104
105
106
107
108
109
110
111
112
113
114
115
116
117
118
119
120
121
122
123
124
125
126
127
128
129
130
131
132
133
134
135
136
137
138
139
140
141
142
143
144
145
146
147
148
149
150
151
152
153
154
155
156
157
158
159
160
161
162
163
164
165
166
167
168
169
170
171
172
173
174
175
176
177
178
179
180
181
182
183
184
185
186
187
188
189
190
191
192
193
194
195
196
197
198
199
200
201
202
203
204
205
206
207
208
209
210
211
212
213
214
215
216
217
218
219
220
221
222
223
224
225
226
227
228
229
230
231
232
233
234
235
236
237
238
239
240
241
242
243
244
245
246
247
248
249
250
251
252
253
254
255
256
257
258
259
260
261
262
263
264
265
266
267
268
269
270
271
272
273
274
275
276
277
278
279
280
281
282
283
284
285
286
287
288
289
290
291
292
293
294
295
296
297
298
299
300
301
302
303
304
305
306
307
308
309
310
311
312
313
314
315
316
317
318
319
320
321
322
323
324
325
326
327
328
329
330
331
332
333
334
335
336
337
338
339
340
341
342
343
344
345
346
347
348
349
350
351
352
353
354
355
356
357
358
359
360
361
362
363
364
365
366
367
368
369
370
371
372
373
374
375
376
377
378
379
380
381
382
383
384
385
386
387
388
389
390
391
392
393
394
395
396
397
398
399
400
401
402
403
404
405
406
407
408
409
410
411
412
413
414
415
416
417
418
419
420
421
422
423
424
425
426
427
428
429
430
431
432
433
434
435
436
437
438
439
440
441
442
443
444
445
446
447
448
449
450
451
452
453
454
455
456
457
458
459
460
461
462
463
464
465
466
467
468
469
470
471
472
473
474
475
476
477
478
479
480
481
482
483
484
485
486
487
488
489
490
491
492
493
494
495
496
497
498
499
500
501
502
503
504
505
506
507
508
509
510
511
512
513
514
515
516
517
518
519
520
521
522
523
524
525
526
527
528
529
530
531
532
533
534
535
536
537
538
539
540
541
542
543
544
545
546
547
548
549
550
551
552
553
554
555
556
557
558
559
560
561
562
563
564
565
566
567
568
569
570
571
572
573
574
575
576
577
578
579
580
581
582
583
584
585
586
587
588
589
590
591
592
593
594
595
596
597
598
599
600
601
602
603
604
605
606
607
608
609
610
611
612
613
614
615
616
617
618
619
620
621
622
623
624
625
626
627
628
629
630
631
632
633
634
635
636
637
638
639
640
641
642
643
644
645
646
647
648
649
650
651
652
653
654
655
656
657
658
659
660
661
662
663
664
665
666
667
668
669
670
671
672
673
674
675
676
677
678
679
680
681
682
683
684
685
686
687
688
689
690
691
692
693
694
695
696
697
698
699
700
701
702
703
704
705
706
707
708
709
710
711
712
713
714
715
716
717
718
719
720
721
722
723
724
725
726
727
728
729
730
731
732
733
734
735
736
737
738
739
740
741
742
743
744
745
746
747
748
749
750
751
752
753
754
755
756
757
758
759
760
761
762
763
764
765
766
767
768
769
770
771
772
773
774
775
776
777
778
779
780
781
782
783
784
785
786
787
788
789
790
791
792
793
794
795
796
797
798
799
800
801
802
803
804
805
806
807
808
809
810
811
812
813
814
815
816
817
818
819
820
821
822
823
824
825
826
827
828
829
830
831
832
833
834
835
836
837
838
839
840
841
842
843
844
845
846
847
848
849
850
851
852
853
854
855
856
857
858
859
860
861
862
863
864
865
866
867
868
869
870
871
872
873
874
875
876
877
878
879
880
881
882
883
884
885
886
887
888
889
890
891
892
893
894
895
896
897
898
899
900
901
902
903
904
905
906
907
908
909
910
911
912
913
914
915
916
917
918
919
920
921
922
923
924
925
926
927
928
929
930
931
932
933
934
935
936
937
938
939
940
941
942
943
944
945
946
947
948
949
950
951
952
953
954
955
956
957
958
959
960
961
962
963
964
965
966
967
968
969
970
971
972
973
974
975
976
977
978
979
980
981
982
983
984
985
986
987
988
989
990
991
992
993
994
995
996
997
998
999
1000
1001
1002
1003
1004
1005
1006
1007
1008
1009
1010
1011
1012
1013
1014
1015
1016
1017
1018
1019
1020
1021
1022
1023
1024
1025
1026
1027
1028
1029
1030
1031
1032
1033
1034
1035
1036
1037
1038
1039
1040
1041
1042
1043
1044
1045
1046
1047
1048
1049
1050
1051
1052
1053
1054
1055
1056
1057
1058
1059
1060
1061
1062
1063
1064
1065
1066
1067
1068
1069
1070
1071
1072
1073
1074
1075
1076
1077
1078
1079
1080
1081
1082
1083
1084
1085
1086
1087
1088
1089
1090
1091
1092
1093
1094
1095
1096
1097
1098
1099
1100
1101
1102
1103
1104
1105
1106
1107
1108
1109
1110
1111
1112
1113
1114
1115
1116
1117
1118
1119
1120
1121
1122
1123
1124
1125
1126
1127
1128
1129
1130
1131
1132
1133
1134
1135
1136
1137
1138
1139
1140
1141
1142
1143
1144
1145
1146
1147
1148
1149
1150
1151
1152
1153
1154
1155
1156
1157
1158
1159
1160
1161
1162
1163
1164
1165
1166
1167
1168
1169
1170
1171
1172
1173
1174
1175
1176
1177
1178
1179
1180
1181
1182
1183
1184
1185
1186
1187
1188
1189
1190
1191
1192
1193
1194
1195
1196
1197
1198
1199
1200
1201
1202
1203
1204
1205
1206
1207
1208
1209
1210
1211
1212
1213
1214
1215
1216
1217
1218
1219
1220
1221
1222
1223
1224
1225
1226
1227
1228
1229
1230
1231
1232
1233
1234
1235
1236
1237
1238
1239
1240
1241
1242
1243
1244
1245
1246
1247
1248
1249
1250
1251
1252
1253
1254
1255
1256
1257
1258
1259
1260
1261
1262
1263
1264
1265
1266
1267
1268
1269
1270
1271
1272
1273
1274
1275
1276
1277
1278
1279
1280
1281
1282
1283
1284
1285
1286
1287
1288
1289
1290
1291
1292
1293
1294
1295
1296
1297
|
/****************************************************************************
* drivers/wireless/cc3000.c
*
* Copyright (C) 2011-2012 Gregory Nutt. All rights reserved.
* Authors: Gregory Nutt <gnutt@nuttx.org>
* David_s5 <david_s5@nscdg.com>
*
* References:
* CC30000 from Texas Instruments http://processors.wiki.ti.com/index.php/CC3000
*
* See also:
* http://processors.wiki.ti.com/index.php/CC3000_Host_Driver_Porting_Guide
* http://processors.wiki.ti.com/index.php/CC3000_Host_Programming_Guide
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions
* are met:
*
* 1. Redistributions of source code must retain the above copyright
* notice, this list of conditions and the following disclaimer.
* 2. Redistributions in binary form must reproduce the above copyright
* notice, this list of conditions and the following disclaimer in
* the documentation and/or other materials provided with the
* distribution.
* 3. Neither the name NuttX nor the names of its contributors may be
* used to endorse or promote products derived from this software
* without specific prior written permission.
*
* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
* "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
* LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
* FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE
* COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
* INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING,
* BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS
* OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED
* AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
* LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
* ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
* POSSIBILITY OF SUCH DAMAGE.
*
****************************************************************************/
/****************************************************************************
* Included Files
****************************************************************************/
#include <nuttx/config.h>
#include <sys/types.h>
#include <stdint.h>
#include <stdbool.h>
#include <stdio.h>
#include <unistd.h>
#include <string.h>
#include <fcntl.h>
#include <pthread.h>
#include <semaphore.h>
#include <poll.h>
#include <errno.h>
#include <assert.h>
#include <debug.h>
#include <nuttx/kmalloc.h>
#include <nuttx/clock.h>
#include <nuttx/arch.h>
#include <nuttx/fs/fs.h>
#include <nuttx/spi/spi.h>
#include <arpa/inet.h>
#include <nuttx/wireless/wireless.h>
#include <nuttx/wireless/cc3000.h>
#include <nuttx/wireless/cc3000/include/cc3000_upif.h>
#include <nuttx/wireless/cc3000/cc3000_common.h>
#include <nuttx/wireless/cc3000/hci.h>
#include "cc3000.h"
/****************************************************************************
* Pre-processor Definitions
****************************************************************************/
#if CC3000_RX_BUFFER_SIZE > CONFIG_MQ_MAXMSGSIZE
#error "CONFIG_MQ_MAXMSGSIZE needs to be >= CC3000_RX_BUFFER_SIZE"
#endif
#ifndef ARRAY_SIZE
# define ARRAY_SIZE(x) (sizeof(x) / sizeof((x)[0]))
#endif
#define NUMBER_OF_MSGS 2
/****************************************************************************
* Private Types
****************************************************************************/
/****************************************************************************
* Private Function Prototypes
****************************************************************************/
/* Low-level SPI helpers */
static void cc3000_lock_and_select(FAR struct spi_dev_s *spi);
static void cc3000_deselect_and_unlock(FAR struct spi_dev_s *spi);
/* Interrupts and data sampling */
static void cc3000_notify(FAR struct cc3000_dev_s *priv);
static void *cc3000_worker(FAR void *arg);
static int cc3000_interrupt(int irq, FAR void *context);
/* Character driver methods */
static int cc3000_open(FAR struct file *filep);
static int cc3000_close(FAR struct file *filep);
static ssize_t cc3000_read(FAR struct file *filep, FAR char *buffer, size_t len);
static ssize_t cc3000_write(FAR struct file *filep, FAR const char *buffer, size_t len);
static int cc3000_ioctl(FAR struct file *filep, int cmd, unsigned long arg);
#ifndef CONFIG_DISABLE_POLL
static int cc3000_poll(FAR struct file *filep, struct pollfd *fds, bool setup);
#endif
/****************************************************************************
* Private Data
****************************************************************************/
/* This the vtable that supports the character driver interface */
static const struct file_operations cc3000_fops =
{
cc3000_open, /* open */
cc3000_close, /* close */
cc3000_read, /* read */
cc3000_write, /* write */
0, /* seek */
cc3000_ioctl, /* ioctl */
#ifndef CONFIG_DISABLE_POLL
cc3000_poll /* poll */
#endif
};
/* If only a single CC3000 device is supported, then the driver state
* structure may as well be pre-allocated.
*/
#ifndef CONFIG_CC3000_MULTIPLE
static struct cc3000_dev_s g_cc3000;
/* Otherwise, we will need to maintain allocated driver instances in a list */
#else
static struct cc3000_dev_s *g_cc3000list;
#endif
uint8_t spi_readCommand[] = READ_COMMAND;
/****************************************************************************
* Private Functions
****************************************************************************/
/****************************************************************************
* Name: cc3000_devtake() and cc3000_devgive()
*
* Description:
* Used to get exclusive access to a CC3000 driver.
*
****************************************************************************/
static int cc3000_devtake(FAR struct cc3000_dev_s *priv)
{
int rv;
/* Take the semaphore (perhaps waiting) */
while ((rv = sem_wait(&priv->devsem)) != 0)
{
/* The only case that an error should occur here is if the wait was awakened
* by a signal.
*/
DEBUGASSERT(rv == OK || errno == EINTR);
}
return rv;
}
static inline int cc3000_devgive(FAR struct cc3000_dev_s *priv)
{
return sem_post(&priv->devsem);
}
/************************************************************************************
* Name: usdelay()
*
* Description:
* timeout = the time out is uS
*
************************************************************************************/
static void usdelay(long ustimeout)
{
volatile int j;
ustimeout = 1 + (ustimeout * CONFIG_BOARD_LOOPSPERMSEC)/1000;
for (j = 0; j < ustimeout; j++)
{
}
}
/****************************************************************************
* Function: cc3000_configspi
*
* Description:
* Configure the SPI for use with the CC3000. This function should be
* called to configure the SPI
* bus.
*
* Parameters:
* spi - Reference to the SPI driver structure
*
* Returned Value:
* None
*
* Assumptions:
*
****************************************************************************/
static inline void cc3000_configspi(FAR struct spi_dev_s *spi)
{
idbg("Mode: %d Bits: 8 Frequency: %d\n",
CONFIG_CC3000_SPIMODE, CONFIG_CC3000_SPI_FREQUENCY);
SPI_SETMODE(spi, CONFIG_CC3000_SPIMODE);
SPI_SETBITS(spi, 8);
SPI_SETFREQUENCY(spi, CONFIG_CC3000_SPI_FREQUENCY);
}
/****************************************************************************
* Function: cc3000_lock
*
* Description:
* Lock the SPI bus and re-configure as necessary. This function must be
* to assure: (1) exclusive access to the SPI bus, and (2) to assure that
* the shared bus is properly configured for the cc3000 module.
*
* Parameters:
* spi - Reference to the SPI driver structure
*
* Returned Value:
* None
*
* Assumptions:
*
****************************************************************************/
static void cc3000_lock_and_select(FAR struct spi_dev_s *spi)
{
#ifndef CONFIG_SPI_OWNBUS
/* Lock the SPI bus because there are multiple devices competing for the
* SPI bus
*/
/* Lock the SPI bus so that we have exclusive access */
(void)SPI_LOCK(spi, true);
#endif
/* We have the lock. Now make sure that the SPI bus is configured for the
* CC3000 (it might have gotten configured for a different device while
* unlocked)
*/
cc3000_configspi(spi);
SPI_SELECT(spi, SPIDEV_WIRELESS, true);
}
/****************************************************************************
* Function: cc3000_unlock
*
* Description:
* If we are sharing the SPI bus with other devices (CONFIG_SPI_OWNBUS
* undefined) then we need to un-lock the SPI bus for each transfer,
* possibly losing the current configuration.
*
* Parameters:
* spi - Reference to the SPI driver structure
*
* Returned Value:
* None
*
* Assumptions:
*
****************************************************************************/
static void cc3000_deselect_and_unlock(FAR struct spi_dev_s *spi)
{
/* De select */
SPI_SELECT(spi, SPIDEV_WIRELESS, false);
#ifndef CONFIG_SPI_OWNBUS
/* Relinquish the SPI bus. */
(void)SPI_LOCK(spi, false);
#endif
}
/****************************************************************************
* Function: cc3000_wait
*
* Description:
* Helper function to wait on the semaphore signaled by the
*
* Parameters:
* priv - Reference to the CC3000 driver structure
* priv -
*
* Returned Value:
* 0 - Semaphore signaled and devsem retaken
* < 0 - Some Error occurred
* Assumptions:
* Own the devsem on entry
*
****************************************************************************/
static int cc3000_wait(FAR struct cc3000_dev_s *priv, sem_t* psem)
{
int ret;
/* Give up */
sched_lock();
cc3000_devgive(priv);
/* Wait on first psem to become signaled */
ret = sem_wait(psem);
if (ret >= 0)
{
/* Yes... then retake the mutual exclusion semaphore */
ret = cc3000_devtake(priv);
}
sched_unlock();
/* Was the semaphore wait successful? Did we successful re-take the
* mutual exclusion semaphore?
*/
if (ret < 0)
{
/* No.. One of the two sem_wait's failed. */
ret = -errno;
}
return ret;
}
/****************************************************************************
* Function: cc3000_wait_irq
*
* Description:
* Helper function to wait on the irqsem signaled by the interrupt
*
* Parameters:
* priv - Reference to the CC3000 driver structure
*
* Returned Value:
* 0 - Semaphore signaled and devsem retaken
* < 0 - Some Error occurred
* Assumptions:
* Own the devsem on entry
*
****************************************************************************/
static inline int cc3000_wait_irq(FAR struct cc3000_dev_s *priv)
{
return cc3000_wait(priv,&priv->irqsem);
}
/****************************************************************************
* Function: cc3000_wait_ready
*
* Description:
* Helper function to wait on the readysem signaled by the interrupt
*
* Parameters:
* priv - Reference to the CC3000 driver structure
*
* Returned Value:
* 0 - Semaphore signaled and devsem retaken
* < 0 - Some Error occurred
* Assumptions:
* Own the devsem on entry
*
****************************************************************************/
static inline int cc3000_wait_ready(FAR struct cc3000_dev_s *priv)
{
return cc3000_wait(priv,&priv->readysem);
}
/****************************************************************************
* Name: cc3000_notify
****************************************************************************/
static void cc3000_notify(FAR struct cc3000_dev_s *priv)
{
#ifndef CONFIG_DISABLE_POLL
int i;
#endif
/* If there are threads waiting for read data, then signal one of them
* that the read data is available.
*/
if (priv->nwaiters > 0)
{
/* After posting this semaphore, we need to exit because the CC3000
* is no longer available.
*/
sem_post(&priv->waitsem);
}
/* If there are threads waiting on poll() for CC3000 data to become available,
* then wake them up now. NOTE: we wake up all waiting threads because we
* do not know that they are going to do. If they all try to read the data,
* then some make end up blocking after all.
*/
#ifndef CONFIG_DISABLE_POLL
for (i = 0; i < CONFIG_CC3000_NPOLLWAITERS; i++)
{
struct pollfd *fds = priv->fds[i];
if (fds)
{
fds->revents |= POLLIN;
nllvdbg("Report events: %02x\n", fds->revents);
sem_post(fds->sem);
}
}
#endif
}
/****************************************************************************
* Name: cc3000_worker
****************************************************************************/
static void * cc3000_worker(FAR void *arg)
{
FAR struct cc3000_dev_s *priv = (FAR struct cc3000_dev_s *)arg;
FAR struct cc3000_config_s *config;
int ret;
ASSERT(priv != NULL);
/* Get a pointer the callbacks for convenience (and so the code is not so
* ugly).
*/
config = priv->config;
DEBUGASSERT(config != NULL);
/* We have started release our creator*/
sem_post(&priv->readysem);
while(1)
{
priv->config->probe(config,0, 1);
cc3000_devtake(priv);
/* Done ? */
if ((cc3000_wait_irq(priv) != -EINTR) && (priv->workertid != -1))
{
priv->config->probe(config,0, 0);
nllvdbg("State%d\n",priv->state);
switch (priv->state)
{
case eSPI_STATE_POWERUP:
/* Signal the device has interrupted after power up */
priv->state = eSPI_STATE_INITIALIZED;
sem_post(&priv->readysem);
break;
case eSPI_STATE_WRITE_WAIT_IRQ:
/* Signal the device has interrupted after Chip Select During a write operation */
priv->state = eSPI_STATE_WRITE_PROCEED;
sem_post(&priv->readysem);
break;
case eSPI_STATE_WRITE_DONE: /* IRQ post a write => Solicited */
case eSPI_STATE_IDLE: /* IRQ when Idel => cc3000 has data for the hosts Unsolicited */
{
uint16_t data_to_recv;
priv->state = eSPI_STATE_READ_IRQ;
/* Issue the read command */
cc3000_lock_and_select(priv->spi); /* Assert CS */
priv->state = eSPI_STATE_READ_PROCEED;
SPI_EXCHANGE(priv->spi,spi_readCommand,priv->rx_buffer, ARRAY_SIZE(spi_readCommand));
/* Extract Length bytes from Rx Buffer */
uint16_t *pnetlen = (uint16_t *) &priv->rx_buffer[READ_OFFSET_TO_LENGTH];
data_to_recv = ntohs(*pnetlen);
if (data_to_recv)
{
/* We will read ARRAY_SIZE(spi_readCommand) + data_to_recv. is it odd? */
if ((data_to_recv + ARRAY_SIZE(spi_readCommand)) & 1)
{
/* Odd so make it even */
data_to_recv++;
}
/* Read the whole payload in at the beginning of the buffer
* Will it fit?
*/
DEBUGASSERT(data_to_recv < ARRAY_SIZE(priv->rx_buffer));
SPI_RECVBLOCK(priv->spi, priv->rx_buffer, data_to_recv);
}
cc3000_deselect_and_unlock(priv->spi); /* De assert CS */
/* Disable more messages as the wl code will resume via CC3000IOC_COMPLETE */
if (data_to_recv)
{
int count;
priv->state = eSPI_STATE_READ_READY;
priv->rx_buffer_len = data_to_recv;
ret = mq_send(priv->queue, priv->rx_buffer, data_to_recv, 1);
DEBUGASSERT(ret>=0);
/* Notify any waiters that new CC3000 data is available */
cc3000_notify(priv);
/* Give up driver */
cc3000_devgive(priv);
nllvdbg("Wait On Completion\n");
sem_wait(&priv->wrkwaitsem);
nllvdbg("Completed S:%d irq :%d\n",priv->state,priv->config->irq_read(priv->config));
sem_getvalue(&priv->irqsem, &count);
if (priv->config->irq_read(priv->config) && count==0)
{
sem_post(&priv->irqsem);
}
if (priv->state == eSPI_STATE_READ_READY)
{
priv->state = eSPI_STATE_IDLE;
}
continue;
}
} /* eSPI_STATE_WRITE_DONE or eSPI_STATE_IDLE */
break;
default:
nllvdbg("default: State%d\n",priv->state);
break;
} /* end switch */
} /* end if */
cc3000_devgive(priv);
} /* while(1) */
}
/****************************************************************************
* Name: cc3000_interrupt
****************************************************************************/
static int cc3000_interrupt(int irq, FAR void *context)
{
FAR struct cc3000_dev_s *priv;
/* Which CC3000 device caused the interrupt? */
#ifndef CONFIG_CC3000_MULTIPLE
priv = &g_cc3000;
#else
for (priv = g_cc3000list;
priv && priv->configs->irq != irq;
priv = priv->flink);
ASSERT(priv != NULL);
#endif
/* Run the worker thread */
priv->config->probe(priv->config,1, 0);
sem_post(&priv->irqsem);
priv->config->probe(priv->config,1, 1);
/* Clear any pending interrupts and return success */
priv->config->irq_clear(priv->config);
return OK;
}
/****************************************************************************
* Name: cc3000_open
****************************************************************************/
static int cc3000_open(FAR struct file *filep)
{
FAR struct inode *inode;
struct mq_attr attr;
pthread_attr_t tattr;
struct sched_param param;
char queuename[QUEUE_NAMELEN];
FAR struct cc3000_dev_s *priv;
uint8_t tmp;
int ret;
DEBUGASSERT(filep);
inode = filep->f_inode;
DEBUGASSERT(inode && inode->i_private);
priv = (FAR struct cc3000_dev_s *)inode->i_private;
nllvdbg("crefs: %d\n", priv->crefs);
/* Get exclusive access to the driver data structure */
ret = cc3000_devtake(priv);
if (ret < 0)
{
return -ret;
}
/* Increment the reference count */
tmp = priv->crefs + 1;
if (tmp == 0)
{
/* More than 255 opens; uint8_t overflows to zero */
ret = -EMFILE;
goto errout_with_sem;
}
/* When the reference increments to 1, this is the first open event
* on the driver.. and an opportunity to do any one-time initialization.
*/
if (tmp==1)
{
/* Ensure the power is off so we get the falling edge of IRQ*/
priv->config->power_enable(priv->config, false);
attr.mq_maxmsg = NUMBER_OF_MSGS;
attr.mq_msgsize = CC3000_RX_BUFFER_SIZE;
attr.mq_flags = 0;
/* Set the flags for the open of the queue.
* Make it a blocking open on the queue, meaning it will block if
* this process tries to send to the queue and the queue is full.
*
* O_CREAT - the queue will get created if it does not already exist.
* O_WRONLY - we are only planning to write to the queue.
*
* Open the queue, and create it if the receiving process hasn't
* already created it.
*/
snprintf(queuename, QUEUE_NAMELEN, QUEUE_FORMAT, priv->minor);
priv->queue = mq_open(queuename,O_WRONLY|O_CREAT, 0666, &attr);
if (priv->queue < 0)
{
priv->crefs--;
ret = -errno;
goto errout_with_sem;
}
pthread_attr_init(&tattr);
param.sched_priority = SCHED_PRIORITY_MAX;
pthread_attr_setschedparam(&tattr, ¶m);
ret = pthread_create(&priv->workertid, &tattr, cc3000_worker, (pthread_addr_t)priv);
if (ret < 0)
{
mq_close(priv->queue);
priv->queue = 0;
ret = -errno;
goto errout_with_sem;
}
priv->state = eSPI_STATE_POWERUP;
priv->config->irq_clear(priv->config);
/* Bring the device Online A) on http://processors.wiki.ti.com/index.php/File:CC3000_Master_SPI_Write_Sequence_After_Power_Up.png */
priv->config->irq_enable(priv->config, true);
/* Wait on child thread */
cc3000_wait_ready(priv);
priv->config->power_enable(priv->config, true);
}
/* Save the new open count on success */
priv->crefs = tmp;
errout_with_sem:
cc3000_devgive(priv);
return ret;
}
/****************************************************************************
* Name: cc3000_close
****************************************************************************/
static int cc3000_close(FAR struct file *filep)
{
FAR struct inode *inode;
FAR struct cc3000_dev_s *priv;
int ret;
DEBUGASSERT(filep);
inode = filep->f_inode;
DEBUGASSERT(inode && inode->i_private);
priv = (FAR struct cc3000_dev_s *)inode->i_private;
nllvdbg("crefs: %d\n", priv->crefs);
/* Get exclusive access to the driver data structure */
ret = cc3000_devtake(priv);
if (ret < 0)
{
return -EINTR;
}
/* Decrement the reference count unless it would decrement a negative
* value. When the count decrements to zero, there are no further
* open references to the driver.
*/
int tmp = priv->crefs;
if (priv->crefs >= 1)
{
priv->crefs--;
}
if (tmp == 1)
{
priv->config->irq_enable(priv->config, false);
priv->config->irq_clear(priv->config);
priv->config->power_enable(priv->config, false);
pthread_t workertid = priv->workertid;
priv->workertid = -1;
pthread_cancel(workertid);
pthread_join(workertid,NULL);
mq_close(priv->queue);
priv->queue = 0;
}
cc3000_devgive(priv);
return OK;
}
/****************************************************************************
* Name: cc3000_read
****************************************************************************/
static ssize_t cc3000_read(FAR struct file *filep, FAR char *buffer, size_t len)
{
FAR struct inode *inode;
FAR struct cc3000_dev_s *priv;
int ret;
ssize_t nread;
nllvdbg("buffer:%p len:%d\n", buffer, len);
DEBUGASSERT(filep);
inode = filep->f_inode;
DEBUGASSERT(inode && inode->i_private);
priv = (FAR struct cc3000_dev_s *)inode->i_private;
/* Verify that the caller has provided a buffer large enough to receive
* the maximum data.
*/
if (len < CC3000_RX_BUFFER_SIZE)
{
idbg("Unsupported read size: %d\n", len);
nread = -ENOSYS;
goto errout_without_sem;
}
/* Get exclusive access to the driver data structure */
ret = cc3000_devtake(priv);
if (ret < 0)
{
nread = -errno;
goto errout_without_sem;
}
for (nread = priv->rx_buffer_len; nread == 0; nread = priv->rx_buffer_len)
{
if (nread > 0)
{
/* Yes.. break out to return what we have. */
break;
}
/* data is not available now. We would have to wait to get
* receive sample data. If the user has specified the O_NONBLOCK
* option, then just return an error.
*/
nllvdbg("CC3000 data is not available\n");
if (filep->f_oflags & O_NONBLOCK)
{
nread = -EAGAIN;
break;
}
/* Otherwise, wait for something to be written to the
* buffer. Increment the number of waiters so that the notify
* will know that it needs to post the semaphore to wake us up.
*/
sched_lock();
priv->nwaiters++;
cc3000_devgive(priv);
/* We may now be pre-empted! But that should be okay because we
* have already incremented nwaiters. Pre-emptions is disabled
* but will be re-enabled while we are waiting.
*/
nllvdbg("Waiting..\n");
ret = sem_wait(&priv->waitsem);
priv->nwaiters--;
sched_unlock();
/* Did we successfully get the waitsem? */
if (ret >= 0)
{
/* Yes... then retake the mutual exclusion semaphore */
ret = cc3000_devtake(priv);
}
/* Was the semaphore wait successful? Did we successful re-take the
* mutual exclusion semaphore?
*/
if (ret < 0)
{
/* No.. One of the two sem_wait's failed. */
int errval = errno;
/* Were we awakened by a signal? Did we read anything before
* we received the signal?
*/
if (errval != EINTR || nread >= 0)
{
/* Yes.. return the error. */
nread = -errval;
}
/* Break out to return what we have. Note, we can't exactly
* "break" out because whichever error occurred, we do not hold
* the exclusion semaphore.
*/
goto errout_without_sem;
}
}
if (nread > 0)
{
memcpy(buffer,priv->rx_buffer,priv->rx_buffer_len);
priv->rx_buffer_len = 0;
}
cc3000_devgive(priv);
errout_without_sem:
nllvdbg("Returning: %d\n", nread);
#ifndef CONFIG_DISABLE_POLL
if (nread > 0)
{
cc3000_pollnotify(priv, POLLOUT);
}
#endif
return nread;
}
/****************************************************************************
* Name:cc3000_write
*
* Bit of non standard buffer management ahead
* The buffer is memory allocated in the user space with space for the spi
* header
*
****************************************************************************/
static ssize_t cc3000_write(FAR struct file *filep, FAR const char *buffer, size_t len)
{
FAR struct inode *inode;
FAR struct cc3000_dev_s *priv;
int ret;
ssize_t nwritten = 0;
/* Set the padding if count(buffer) is even ( as it will be come odd with header) */
size_t tx_len = (len & 1) ? len : len +1;
nllvdbg("buffer:%p len:%d tx_len:%d\n", buffer, len, tx_len );
DEBUGASSERT(filep);
inode = filep->f_inode;
DEBUGASSERT(inode && inode->i_private);
priv = (FAR struct cc3000_dev_s *)inode->i_private;
/* Get exclusive access to the driver data structure */
ret = cc3000_devtake(priv);
if (ret < 0)
{
/* This should only happen if the wait was canceled by an signal */
idbg("sem_wait: %d\n", errno);
nwritten = -errno;
goto errout_without_sem;
}
/* Figure out the total length of the packet in order to figure out if there is padding or not */
priv->tx_buffer[0] = WRITE;
priv->tx_buffer[1] = HI(tx_len);
priv->tx_buffer[2] = LO(tx_len);
priv->tx_buffer[3] = 0;
priv->tx_buffer[4] = 0;
memcpy(&priv->tx_buffer[SPI_HEADER_SIZE],&buffer[SPI_HEADER_SIZE],tx_len);
tx_len += SPI_HEADER_SIZE;
/* The first write transaction to occur after release of the shutdown has slightly different timing than the others.
* The normal Master SPI write sequence is nCS low, followed by IRQ low (CC3000 host), indicating that
* the CC3000 core device is ready to accept data. However, after power up the sequence is slightly different,
* as shown in the following Figure: http://processors.wiki.ti.com/index.php/File:CC3000_Master_SPI_Write_Sequence_After_Power_Up.png
* The following is a sequence of operations:
* The master detects the IRQ line low: in this case the detection of
* IRQ low does not indicate the intention of the CC3000 device to communicate with the
* master but rather CC3000 readiness after power up.
* The master asserts nCS.
* The master introduces a delay of at least 50 μs before starting actual transmission of data.
* The master transmits the first 4 bytes of the SPI header.
* The master introduces a delay of at least an additional 50 μs.
* The master transmits the rest of the packet.
*/
if (priv->state == eSPI_STATE_POWERUP)
{
ret = cc3000_wait_ready(priv);
if (ret < 0)
{
nwritten = ret;
goto errout_without_sem;
}
}
if (priv->state == eSPI_STATE_INITIALIZED)
{
cc3000_lock_and_select(priv->spi); /* Assert CS */
usdelay(55);
SPI_SNDBLOCK(priv->spi, priv->tx_buffer, 4);
usdelay(55);
SPI_SNDBLOCK(priv->spi, priv->tx_buffer+4, tx_len-4);
}
else
{
nllvdbg("Assert CS\n");
priv->state = eSPI_STATE_WRITE_WAIT_IRQ;
cc3000_lock_and_select(priv->spi); /* Assert CS */
nllvdbg("Wait on IRQ Active\n");
ret = cc3000_wait_ready(priv);
nllvdbg("IRQ Signaled\n");
if (ret < 0)
{
/* This should only happen if the wait was canceled by an signal */
cc3000_deselect_and_unlock(priv->spi);
nllvdbg("sem_wait: %d\n", errno);
DEBUGASSERT(errno == EINTR);
nwritten = ret;
goto errout_without_sem;
}
SPI_SNDBLOCK(priv->spi, priv->tx_buffer, tx_len);
}
priv->state = eSPI_STATE_WRITE_DONE;
nllvdbg("Deassert CS S:eSPI_STATE_WRITE_DONE\n");
cc3000_deselect_and_unlock(priv->spi);
nwritten = tx_len;
cc3000_devgive(priv);
errout_without_sem:
nllvdbg("Returning: %d\n", ret);
return nwritten;
}
/****************************************************************************
* Name:cc3000_ioctl
****************************************************************************/
static int cc3000_ioctl(FAR struct file *filep, int cmd, unsigned long arg)
{
FAR struct inode *inode;
FAR struct cc3000_dev_s *priv;
int ret;
nllvdbg("cmd: %d arg: %ld\n", cmd, arg);
DEBUGASSERT(filep);
inode = filep->f_inode;
DEBUGASSERT(inode && inode->i_private);
priv = (FAR struct cc3000_dev_s *)inode->i_private;
/* Get exclusive access to the driver data structure */
ret = cc3000_devtake(priv);
if (ret < 0)
{
/* This should only happen if the wait was canceled by an signal */
return -errno;
}
/* Process the IOCTL by command */
ret = OK;
switch (cmd)
{
case CC3000IOC_COMPLETE: /* arg: Pointer to uint32_t frequency value */
{
DEBUGASSERT(priv->config);
sem_post(&priv->wrkwaitsem);
}
break;
case CC3000IOC_GETQUEID:
{
FAR int *pid = (FAR int *)(arg);
DEBUGASSERT(pid != NULL);
*pid = priv->minor;
break;
}
default:
ret = -ENOTTY;
break;
}
cc3000_devgive(priv);
return ret;
}
/****************************************************************************
* Name: cc3000_poll
****************************************************************************/
#ifndef CONFIG_DISABLE_POLL
static int cc3000_poll(FAR struct file *filep, FAR struct pollfd *fds,
bool setup)
{
FAR struct inode *inode;
FAR struct cc3000_dev_s *priv;
int ret = OK;
int i;
nllvdbg("setup: %d\n", (int)setup);
DEBUGASSERT(filep && fds);
inode = filep->f_inode;
DEBUGASSERT(inode && inode->i_private);
priv = (FAR struct cc3000_dev_s *)inode->i_private;
/* Are we setting up the poll? Or tearing it down? */
ret = cc3000_devtake(priv);
if (ret < 0)
{
/* This should only happen if the wait was canceled by an signal */
return -errno;
}
if (setup)
{
/* Ignore waits that do not include POLLIN */
if ((fds->events & POLLIN) == 0)
{
ret = -EDEADLK;
goto errout;
}
/* This is a request to set up the poll. Find an available
* slot for the poll structure reference
*/
for (i = 0; i < CONFIG_CC3000_NPOLLWAITERS; i++)
{
/* Find an available slot */
if (!priv->fds[i])
{
/* Bind the poll structure and this slot */
priv->fds[i] = fds;
fds->priv = &priv->fds[i];
break;
}
}
if (i >= CONFIG_CC3000_NPOLLWAITERS)
{
fds->priv = NULL;
ret = -EBUSY;
goto errout;
}
/* Should we immediately notify on any of the requested events? */
if (priv->rx_buffer_len)
{
cc3000_notify(priv);
}
}
else if (fds->priv)
{
/* This is a request to tear down the poll. */
struct pollfd **slot = (struct pollfd **)fds->priv;
DEBUGASSERT(slot != NULL);
/* Remove all memory of the poll setup */
*slot = NULL;
fds->priv = NULL;
}
errout:
cc3000_devgive(priv);
return ret;
}
#endif
/****************************************************************************
* Public Functions
****************************************************************************/
/****************************************************************************
* Public Functions
****************************************************************************/
/****************************************************************************
* Name: cc3000_register
*
* Description:
* Configure the CC3000 to use the provided SPI device instance. This
* will register the driver as /dev/inputN where N is the minor device
* number
*
* Input Parameters:
* dev - An SPI driver instance
* config - Persistent board configuration data
* minor - The input device minor number
*
* Returned Value:
* Zero is returned on success. Otherwise, a negated errno value is
* returned to indicate the nature of the failure.
*
****************************************************************************/
int cc3000_register(FAR struct spi_dev_s *spi,
FAR struct cc3000_config_s *config, int minor)
{
FAR struct cc3000_dev_s *priv;
char devname[DEV_NAMELEN];
#ifdef CONFIG_CC3000_MULTIPLE
irqstate_t flags;
#endif
int ret;
nllvdbg("spi: %p minor: %d\n", spi, minor);
/* Debug-only sanity checks */
DEBUGASSERT(spi != NULL && config != NULL && minor >= 0 && minor < 100);
/* Create and initialize a CC3000 device driver instance */
#ifndef CONFIG_CC3000_MULTIPLE
priv = &g_cc3000;
#else
priv = (FAR struct cc3000_dev_s *)kmalloc(sizeof(struct cc3000_dev_s));
if (!priv)
{
idbg("kmalloc(%d) failed\n", sizeof(struct cc3000_dev_s));
return -ENOMEM;
}
#endif
/* Initialize the CC3000 device driver instance */
memset(priv, 0, sizeof(struct cc3000_dev_s));
priv->minor = minor; /* Save the minor number */
priv->spi = spi; /* Save the SPI device handle */
priv->config = config; /* Save the board configuration */
sem_init(&priv->devsem, 0, 1); /* Initialize device structure semaphore */
sem_init(&priv->waitsem, 0, 0); /* Initialize event wait semaphore */
sem_init(&priv->irqsem, 0, 0); /* Initialize IRQ Ready semaphore */
sem_init(&priv->readysem, 0, 0); /* Initialize Device Ready semaphore */
sem_init(&priv->wrkwaitsem, 0, 0); /* Initialize Worker Wait semaphore */
/* Make sure that interrupts are disabled */
config->irq_clear(config);
config->irq_enable(config, false);
/* Attach the interrupt handler */
ret = config->irq_attach(config, cc3000_interrupt);
if (ret < 0)
{
idbg("Failed to attach interrupt\n");
goto errout_with_priv;
}
/* Register the device as an input device */
(void)snprintf(devname, DEV_NAMELEN, DEV_FORMAT, minor);
nllvdbg("Registering %s\n", devname);
ret = register_driver(devname, &cc3000_fops, 0666, priv);
if (ret < 0)
{
idbg("register_driver() failed: %d\n", ret);
goto errout_with_priv;
}
/* If multiple CC3000 devices are supported, then we will need to add
* this new instance to a list of device instances so that it can be
* found by the interrupt handler based on the recieved IRQ number.
*/
#ifdef CONFIG_CC3000_MULTIPLE
priv->flink = g_cc3000list;
g_cc3000list = priv;
irqrestore(flags);
#endif
/* And return success (?) */
return OK;
errout_with_priv:
sem_destroy(&priv->devsem);
#ifdef CONFIG_CC3000_MULTIPLE
kfree(priv);
#endif
return ret;
}
|