1 files changed, 0 insertions, 80 deletions
diff --git a/flow-native/shared/include/flow.h b/flow-native/shared/include/flow.h
deleted file mode 100644
index ebb845a..0000000
--- a/flow-native/shared/include/flow.h
+++ /dev/null
@@ -1,80 +0,0 @@
-#ifndef FLOW_H
-#define FLOW_H
-
-#include <stdbool.h>
-
-//general error codes that are returned by functions
-#define E_IO -1 //I/O error (port should be closed)
-#define E_ACCESS_DENIED -2 //access denied
-#define E_BUSY -3 // port is busy
-#define E_INVALID_SETTINGS -4 // some port settings are invalid
-#define E_INTERRUPT -5 // not really an error, function call aborted because port is closed
-#define E_NO_PORT -6 //requested port does not exist
-
-#define PARITY_NONE 0
-#define PARITY_ODD 1
-#define PARITY_EVEN 2
-
-/** Represents an open serial port. */
-struct serial_config;
-
-/**Opens a serial port and allocates memory for storing configuration. Note: if this function fails,
- * any internally allocated resources will be freed.
- * @param port_name name of port
- * @param baud baud rate
- * @param char_size character size of data transmitted through serial device
- * @param two_stop_bits set to use two stop bits instead of one
- * @param parity kind of parity checking to use
- * @param serial pointer to memory that will be allocated with a serial structure
- * @return 0 on success
- * @return E_NO_PORT if the given port does not exist
- * @return E_ACCESS_DENIED if permissions are not sufficient to open port
- * @return E_BUSY if port is already in use
- * @return E_INVALID_SETTINGS if any of the specified settings are not supported
- * @return E_IO on other error */
-int serial_open(
-  const char* port_name,
-  int baud,
-  int char_size,
-  bool two_stop_bits,
-  int parity,
-  struct serial_config** serial);
-
-/**Closes a previously opened serial port and frees memory containing the configuration. Note: after a call to
- * this function, the 'serial' pointer will become invalid, make sure you only call it once. This function is NOT
- * thread safe, make sure no read or write is in prgress when this function is called (the reason is that per 
- * close manual page, close should not be called on a file descriptor that is in use by another thread). 
- * @param serial pointer to serial configuration that is to be closed (and freed)
- * @return 0 on success
- * @return E_IO on error */
-int serial_close(struct serial_config* serial);
-
-/**Starts a read from a previously opened serial port. The read is blocking, however it may be
- * interrupted by calling 'serial_interrupt' on the given serial port.
- * @param serial pointer to serial configuration from which to read
- * @param buffer buffer into which data is read
- * @param size maximum buffer size
- * @return n>0 the number of bytes read into buffer
- * @return E_INTERRUPT if the call to this function was interrupted
- * @return E_IO on IO error */
-int serial_read(struct serial_config* serial, unsigned char* buffer, size_t size);
-
-/**Interrupts a blocked read call.
- * @param serial_config the serial port to interrupt
- * @return 0 on success
- * @return E_IO on error */
-int serial_interrupt(struct serial_config* serial);
-
-/**Writes data to a previously opened serial port. Non bocking.
- * @param serial pointer to serial configuration to which to write
- * @param data data to write
- * @param size number of bytes to write from data
- * @return n>0 the number of bytes written
- * @return E_IO on IO error */
-int serial_write(struct serial_config* serial, unsigned char* data, size_t size);
-
-/**Sets debugging option. If debugging is enabled, detailed error message are printed from method calls. */
-void serial_debug(bool value);
-
-
-#endif /* FLOW_H */