/****************************************************************************
* apps/include/hex2bin.h
*
* Copyright (C) 2014 Gregory Nutt. All rights reserved.
* Author: Gregory Nutt <gnutt@nuttx.org>
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions
* are met:
*
* 1. Redistributions of source code must retain the above copyright
* notice, this list of conditions and the following disclaimer.
* 2. Redistributions in binary form must reproduce the above copyright
* notice, this list of conditions and the following disclaimer in
* the documentation and/or other materials provided with the
* distribution.
* 3. Neither the name NuttX nor the names of its contributors may be
* used to endorse or promote products derived from this software
* without specific prior written permission.
*
* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
* "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
* LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
* FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE
* COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
* INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING,
* BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS
* OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED
* AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
* LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
* ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
* POSSIBILITY OF SUCH DAMAGE.
*
****************************************************************************/
#ifndef __APPS_INCLUDE_INIFILE_H
#define __APPS_INCLUDE_INIFILE_H
/****************************************************************************
* Included Files
****************************************************************************/
#include <nuttx/config.h>
#include <stdint.h>
#ifdef CONFIG_SYSTEM_HEX2BIN
/****************************************************************************
* Pre-processor Definitions
****************************************************************************/
/* Configuration ************************************************************/
#ifndef CONFIG_SYSTEM_HEX2BIN_BASEADDR
# define CONFIG_SYSTEM_HEX2BIN_BASEADDR 0x00000000
#endif
#ifndef CONFIG_SYSTEM_HEX2BIN_ENDPADDR
# define CONFIG_SYSTEM_HEX2BIN_ENDPADDR 0x00000000
#endif
#ifndef CONFIG_SYSTEM_HEX2BIN_SWAP
# define CONFIG_SYSTEM_HEX2BIN_SWAP 0
#endif
/* Some environments may return CR as end-of-line, others LF, and others
* both. If not specified, the logic here assumes either (but not both) as
* the default.
*/
#if defined(CONFIG_EOL_IS_CR)
# undef CONFIG_EOL_IS_LF
# undef CONFIG_EOL_IS_BOTH_CRLF
# undef CONFIG_EOL_IS_EITHER_CRLF
#elif defined(CONFIG_EOL_IS_LF)
# undef CONFIG_EOL_IS_CR
# undef CONFIG_EOL_IS_BOTH_CRLF
# undef CONFIG_EOL_IS_EITHER_CRLF
#elif defined(CONFIG_EOL_IS_BOTH_CRLF)
# undef CONFIG_EOL_IS_CR
# undef CONFIG_EOL_IS_LF
# undef CONFIG_EOL_IS_EITHER_CRLF
#elif defined(CONFIG_EOL_IS_EITHER_CRLF)
# undef CONFIG_EOL_IS_CR
# undef CONFIG_EOL_IS_LF
# undef CONFIG_EOL_IS_BOTH_CRLF
#else
# undef CONFIG_EOL_IS_CR
# undef CONFIG_EOL_IS_LF
# undef CONFIG_EOL_IS_BOTH_CRLF
# define CONFIG_EOL_IS_EITHER_CRLF 1
#endif
/* Debug from hex2bin code */
#ifdef CONFIG_CPP_HAVE_VARARGS
# ifdef CONFIG_SYSTEM_HEX2BIN_DEBUG
# define hex2bin_debug(format, ...) fprintf(stderr, format, ##__VA_ARGS__)
# else
# define hex2bin_debug(x...)
# endif
#else
# ifdef CONFIG_SYSTEM_HEX2BIN_DEBUG
# define hex2bin_debug printf
# else
# define hex2bin_debug (void)
# endif
#endif
/****************************************************************************
* Public Types
****************************************************************************/
/* Intel HEX data steams are normally in big endian order. The following
* enumeration selects other ordering.
*/
enum hex2bin_swap_e
{
HEX2BIN_NOSWAP = 0, /* No swap, stream is in the correct byte order */
HEX2BIN_SWAP16 = 1, /* Swap bytes in 16-bit values */
HEX2BIN_SWAP32 = 2 /* Swap bytes in 32-bit values */
};
/****************************************************************************
* Public Data
****************************************************************************/
#ifdef __cplusplus
#define EXTERN extern "C"
extern "C"
{
#else
#define EXTERN extern
#endif
/****************************************************************************
* Public Function Prototypes
****************************************************************************/
/****************************************************************************
* Name: hex2bin
*
* Description:
* Read the Intel HEX ASCII data provided on the serial IN stream and write
* the binary to the seek-able serial OUT stream.
*
* These streams may be files or, in another usage example, the IN stream
* could be a serial port and the OUT stream could be a memory stream. This
* would decode and write the serial input to memory.
*
* Input Parameters:
* instream - The incoming stream from which Intel HEX data will be
* received.
* outstream - The outgoing stream in which binary data will be written.
* baseaddr - The base address of the outgoing stream. Seeking in the
* output stream will be relative to this address.
* endpaddr - The end address (plus 1) of the outgoing stream. This
* value is used only for range checking. endpaddr must
* be larger than baseaddr. A zero value for endpaddr
* disables range checking.
* swap - Controls byte ordering. See enum hex2bin_swap_e for
* description of the values.
*
* Returned Value
* Zero (OK) is returned on success; a negated errno value is returned on
* failure.
*
****************************************************************************/
struct lib_instream_s;
struct lib_sostream_s;
int hex2bin(FAR struct lib_instream_s *instream,
FAR struct lib_sostream_s *outstream, uint32_t baseaddr,
uint32_t endpaddr, enum hex2bin_swap_e swap);
/****************************************************************************
* Name hex2mem
*
* Description:
* Read the Intel HEX ASCII data provided on the file descriptor 'fd' and
* write the binary to memory.
*
* If, for example, fd is zero (corresponding to stdin), then the HEX
* ASCII data would be taken from the console and written to memory.
*
* Input Parameters:
* fd - The file descriptor from which Intel HEX data will be
* received.
* baseaddr - The base address of the memory region stream.
* endpaddr - The end address (plus 1) of the memory region.
* swap - Controls byte ordering. See enum hex2bin_swap_e for
* description of the values.
*
* Returned Value
* Zero (OK) is returned on success; a negated errno value is returned on
* failure.
*
****************************************************************************/
int hex2mem(int fd, uint32_t baseaddr, uint32_t endpaddr,
enum hex2bin_swap_e swap);
/****************************************************************************
* Name fhex2mem
*
* Description:
* Read the Intel HEX ASCII data provided on the standard stream
* 'instream' and write the binary to memory.
*
* If, for example, instream is stdin, then the HEX ASCII data would be
* taken from the console and written to memory.
*
* Input Parameters:
* instream - The incoming standard stream from which Intel HEX data
* will be received.
* baseaddr - The base address of the memory region stream.
* endpaddr - The end address (plus 1) of the memory region.
* swap - Controls byte ordering. See enum hex2bin_swap_e for
* description of the values.
*
* Returned Value
* Zero (OK) is returned on success; a negated errno value is returned on
* failure.
*
****************************************************************************/
int fhex2mem(FAR FILE *instream, uint32_t baseaddr, uint32_t endpaddr,
enum hex2bin_swap_e swap);
/****************************************************************************
* Name: hex2bin_main
*
* Description:
* Main entry point when hex2bin is built as an NSH built-in task.
*
* Input Parameters:
* Standard task inputs
*
* Returned Value
* EXIT_SUCESS on success; EXIT_FAILURE on failure
*
****************************************************************************/
#ifdef CONFIG_SYSTEM_HEX2BIN_BUILTIN
int hex2bin_main(int argc, char **argv);
#endif /* CONFIG_SYSTEM_HEX2BIN_BUILTIN */
/****************************************************************************
* Name: hex2mem_main
*
* Description:
* Main entry point when hex2mem is built as an NSH built-in task.
*
* Input Parameters:
* Standard task inputs
*
* Returned Value
* EXIT_SUCESS on success; EXIT_FAILURE on failure
*
****************************************************************************/
#ifdef CONFIG_SYSTEM_HEX2MEM_BUILTIN
int hex2mem_main(int argc, char **argv);
#endif /* CONFIG_SYSTEM_HEX2MEM_BUILTIN */
#undef EXTERN
#ifdef __cplusplus
}
#endif
#endif /* CONFIG_SYSTEM_HEX2BIN */
#endif /* __APPS_INCLUDE_INIFILE_H */
