/****************************************************************************
* apps/include/zmodem.h
*
* Copyright (C) 2013 Gregory Nutt. All rights reserved.
* Author: Gregory Nutt <gnutt@nuttx.org>
*
* References:
* "The ZMODEM Inter Application File Transfer Protocol", Chuck Forsberg,
* Omen Technology Inc., October 14, 1988
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions
* are met:
*
* 1. Redistributions of source code must retain the above copyright
* notice, this list of conditions and the following disclaimer.
* 2. Redistributions in binary form must reproduce the above copyright
* notice, this list of conditions and the following disclaimer in
* the documentation and/or other materials provided with the
* distribution.
* 3. Neither the name NuttX nor the names of its contributors may be
* used to endorse or promote products derived from this software
* without specific prior written permission.
*
* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
* "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
* LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
* FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE
* COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
* INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING,
* BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS
* OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED
* AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
* LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
* ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
* POSSIBILITY OF SUCH DAMAGE.
*
****************************************************************************/
#ifndef __APPS_INCLUDE_ZMODEM_H
#define __APPS_INCLUDE_ZMODEM_H
/****************************************************************************
* Included Files
****************************************************************************/
#include <nuttx/config.h>
#include <stdint.h>
#include <stdbool.h>
/****************************************************************************
* Pre-processor Definitions
****************************************************************************/
/* Configuration ************************************************************/
/* The size of one buffer used to read data from the remote peer */
#ifndef CONFIG_SYSTEM_ZMODEM_RCVBUFSIZE
# define CONFIG_SYSTEM_ZMODEM_RCVBUFSIZE 512
#endif
/* Data may be received in gulps of varying size and alignment. Received
* packets data is properly packed into a packet buffer of this size.
*/
#ifndef CONFIG_SYSTEM_ZMODEM_PKTBUFSIZE
# define CONFIG_SYSTEM_ZMODEM_PKTBUFSIZE 512
#endif
/* The size of one transmit buffer used for composing messages sent to the
* remote peer.
*/
#ifndef CONFIG_SYSTEM_ZMODEM_SNDBUFSIZE
# define CONFIG_SYSTEM_ZMODEM_SNDBUFSIZE 512
#endif
/* Absolute pathes are not accepted. This configuration value must be
* set to provide the path to the file storage directory (such as a
* mountpoint directory).
*/
#ifndef CONFIG_SYSTEM_ZMODEM_MOUNTPOINT
# define CONFIG_SYSTEM_ZMODEM_MOUNTPOINT "/tmp"
#endif
/* Response time for sender to respond to requests */
#ifndef CONFIG_SYSTEM_ZMODEM_RESPTIME
# define CONFIG_SYSTEM_ZMODEM_RESPTIME 10
#endif
/* Receiver serial number */
#ifndef CONFIG_SYSTEM_ZMODEM_SERIALNO
# define CONFIG_SYSTEM_ZMODEM_SERIALNO 1
#endif
/* Max receive errors before canceling the transfer */
#ifndef CONFIG_SYSTEM_ZMODEM_MAXERRORS
# define CONFIG_SYSTEM_ZMODEM_MAXERRORS 20
#endif
#ifndef CONFIG_SYSTEM_ZMODEM_MOUNTPOINT
# define CONFIG_SYSTEM_ZMODEM_MOUNTPOINT "/tmp"
#endif
/****************************************************************************
* Public Types
****************************************************************************/
/* Opaque handles returned by initialization functions */
typedef FAR void *ZMHANDLE;
typedef FAR void *ZMRHANDLE;
typedef FAR void *ZMSHANDLE;
/* Enumerations describing arguments to zms_initialize() */
enum zm_xfertype_e
{
XM_XFERTYPE_NORMAL = 0, /* Normal file transfer */
XM_XFERTYPE_BINARY = 1, /* Binary transfer */
XM_XFERTYPE_ASCII = 2, /* Convert \n to local EOL convention */
XM_XFERTYPE_RESUME = 3 /* Resume interrupted transfer or append to file. */
};
enum zm_option_e
{
XM_OPTION_NONE = 0, /* Transfer if source newer or longer */
XM_OPTION_NEWL = 1, /* Transfer if source newer or longer */
XM_OPTION_CRC = 2, /* Transfer if different CRC or length */
XM_OPTION_APPEND = 3, /* Append to existing file, if any */
XM_OPTION_REPLACE = 4, /* Replace existing file */
XM_OPTION_NEW = 5, /* Transfer if source is newer */
XM_OPTION_DIFF = 6, /* Transfer if dates or lengths different */
XM_OPTION_CREATE = 7, /* Protect: transfer only if dest doesn't exist */
XM_OPTION_RENAME = 8 /* Change filename if destination exists */
};
/****************************************************************************
* Public Data
****************************************************************************/
#undef EXTERN
#if defined(__cplusplus)
#define EXTERN extern "C"
extern "C"
{
#else
#define EXTERN extern
#endif
/****************************************************************************
* Public Function Prototypes
****************************************************************************/
/****************************************************************************
* Name: zmr_initialize
*
* Description:
* Initialize for Zmodem receive operation
*
* Input Parameters:
* remfd - The R/W file/socket descriptor to use for communication with the
* remote peer.
*
****************************************************************************/
ZMRHANDLE zmr_initialize(int remfd);
/****************************************************************************
* Name: zmr_release
*
* Description:
* Called by the user when there are no more files to receive.
*
****************************************************************************/
int zmr_release(ZMRHANDLE);
/****************************************************************************
* Name: zms_initialize
*
* Description:
* Initialize for Zmodem send operation. The overall usage is as follows:
*
* 1) Call zms_initialize() to create the partially initialized struct
* zm_state_s instance.
* 2) Make any custom settings in the struct zms_state_s instance.
* 3) Create a stream instance to get the "file" to transmit and add
* the filename to pzms
* 4) Call zms_upload() to transfer the file.
* 5) Repeat 3) and 4) to transfer as many files as desired.
* 6) Call zms_release() when the final file has been transferred.
*
* Input Parameters:
* remfd - The R/W file/socket descriptor to use for communication with the
* remote peer.
*
****************************************************************************/
ZMSHANDLE zms_initialize(int remfd);
/****************************************************************************
* Name: zms_send
*
* Description:
* Send a file.
*
* Input Parameters:
* handle - Handle previoulsy returned by xms_initialize()
* filename - The name of the local file to transfer
* rfilename - The name of the remote file name to create
* option - Describes optional transfer behavior
* f1 - The F1 transfer flags
* skip - True: Skip if file not present at receiving end.
*
****************************************************************************/
int zms_send(ZMSHANDLE handle, FAR const char *filename,
FAR const char *rfilename, enum zm_xfertype_e xfertype,
enum zm_option_e option, bool skip);
/****************************************************************************
* Name: zms_release
*
* Description:
* Called by the user when there are no more files to send.
*
****************************************************************************/
int zms_release(ZMSHANDLE handle);
/****************************************************************************
* Name: zms_hwflowcontrol
*
* Description:
* If CONFIG_SYSTEM_ZMODEM_FULLSTREAMING is defined, then the system
* must provide the following interface in order to enable/disable hardware
* flow control on the device used to communicate with the remote peer.
*
****************************************************************************/
#ifdef CONFIG_SYSTEM_ZMODEM_FULLSTREAMING
int zms_hwflowcontrol(int remfd, bool enable);
#endif
#undef EXTERN
#if defined(__cplusplus)
}
#endif
#endif /* __APPS_INCLUDE_ZMODEM_H */
