/****************************************************************************
* apps/system/zmodem/zm.h
*
* Copyright (C) 2013 Gregory Nutt. All rights reserved.
* Author: Gregory Nutt <gnutt@nuttx.org>
*
* References:
* "The ZMODEM Inter Application File Transfer Protocol", Chuck Forsberg,
* Omen Technology Inc., October 14, 1988
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions
* are met:
*
* 1. Redistributions of source code must retain the above copyright
* notice, this list of conditions and the following disclaimer.
* 2. Redistributions in binary form must reproduce the above copyright
* notice, this list of conditions and the following disclaimer in
* the documentation and/or other materials provided with the
* distribution.
* 3. Neither the name NuttX nor the names of its contributors may be
* used to endorse or promote products derived from this software
* without specific prior written permission.
*
* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
* "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
* LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
* FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE
* COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
* INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING,
* BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS
* OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED
* AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
* LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
* ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
* POSSIBILITY OF SUCH DAMAGE.
*
****************************************************************************/
#ifndef __APPS_SYSTEM_XMODEM_ZM_H
#define __APPS_SYSTEM_XMODEM_ZM_H
/****************************************************************************
* Included Files
****************************************************************************/
#include <nuttx/config.h>
#include <sys/types.h>
#include <stdint.h>
#include <debug.h>
#include <nuttx/compiler.h>
#include <nuttx/ascii.h>
#include <apps/zmodem.h>
/****************************************************************************
* Pre-processor Definitions
****************************************************************************/
/* ZModem *******************************************************************/
/* Zmodem ZRINIT flags. These bits describe the cababilities of the receiver.
* Reference: Paragraph 11.2:
*/
#define CANFDX (1 << 0) /* Rx can send and receive true FDX */
#define CANOVIO (1 << 1) /* Rx can receive data during disk I/O */
#define CANBRK (1 << 2) /* Rx can send a break signal */
#define CANCRY (1 << 3) /* Receiver can decrypt */
#define CANLZW (1 << 4) /* Receiver can uncompress */
#define CANFC32 (1 << 5) /* Receiver can use 32 bit Frame Check */
#define ESCCTL (1 << 6) /* Receiver expects ctl chars to be escaped */
#define ESC8 (1 << 7) /* Receiver expects 8th bit to be escaped */
/* Zmodem ZSINIT flags. These bits describe the capabilities of the sender */
#define TESCCTL (1 << 6) /* Sender needs control chars escaped */
#define TESC8 (1 << 7) /* Sender needs 8th bit escaped. */
/* ZFILE transfer flags */
/* F0 */
#define ZCBIN 1 /* Binary transfer */
#define ZCNL 2 /* Convert NL to local eol convention */
#define ZCRESUM 3 /* Resume interrupted xfer or append to file. */
/* F1 */
#define ZMNEWL 1 /* Transfer if source newer or longer */
#define ZMCRC 2 /* Transfer if different CRC or length */
#define ZMAPND 3 /* Append to existing file, if any */
#define ZMCLOB 4 /* Replace existing file */
#define ZMNEW 5 /* Transfer if source is newer */
#define ZMDIFF 6 /* Transfer if dates or lengths different */
#define ZMPROT 7 /* Protect: transfer only if dest doesn't exist */
#define ZMCHNG 8 /* Change filename if destination exists */
#define ZMMASK 0x1f
#define ZMSKNOLOC (1 << 7) /* Skip if not present at receiving end */
/* F2 */
#define ZTLZW 1 /* lzw compression */
#define ZTRLE 3 /* Run-length encoding */
/* F3 */
#define ZCANVHDR 1 /* Variable headers ok */
#define ZRWOVR 4 /* Byte position for receive window override/256 */
#define ZXSPARS 64 /* Encoding for sparse file ops. */
/* ATTN string special characters. All other characters sent verbose */
#define ATTNBRK 0xdd /* Send break signal */
#define ATTNPSE 0xde /* Pause for one second */
/* Zmodem header types */
#define ZRQINIT 0 /* Request receive init */
#define ZRINIT 1 /* Receive init */
#define ZSINIT 2 /* Send init sequence, define Attn */
#define ZACK 3 /* ACK */
#define ZFILE 4 /* File name, from sender */
#define ZSKIP 5 /* Skip file command, from receiver */
#define ZNAK 6 /* Last packet was garbled */
#define ZABORT 7 /* Abort */
#define ZFIN 8 /* Finish session */
#define ZRPOS 9 /* Resume file from this position, from receiver */
#define ZDATA 10 /* Data packets to follow, from sender */
#define ZEOF 11 /* End of file, from sender */
#define ZFERR 12 /* Fatal i/o error, from receiver */
#define ZCRC 13 /* Request for file crc, from receiver */
#define ZCHALLENGE 14 /* "Send this number back to me", from receiver */
#define ZCOMPL 15 /* Request is complete */
#define ZCAN 16 /* Other end cancelled with CAN-CAN-CAN-CAN-CAN */
#define ZFREECNT 17 /* Request for free bytes on filesystem */
#define ZCOMMAND 18 /* Command, from sending program */
#define ZSTDERR 19 /* Output this message to stderr */
/* Zmodem character definitions */
#define ZDLE ASCII_CAN /* Zmodem escape is CAN */
#define ZDLEE (ZDLE^0x40) /* Escaped ZDLE */
#define ZPAD '*' /* pad */
#define ZBIN 'A' /* 16-bit CRC binary header */
#define ZHEX 'B' /* 16-bit CRC hex header */
#define ZBIN32 'C' /* 32-bit CRC binary header */
#define ZBINR32 'D' /* RLE packed binary frame w/32-bit CRC */
#define ZVBIN 'a' /* Alternate ZBIN */
#define ZVHEX 'b' /* Alternate ZHEX */
#define ZVBIN32 'c' /* Alternate ZBIN32 */
#define ZVBINR32 'd' /* Alternate ZBINR32 */
#define ZRESC 0x7f /* RLE flag/escape character */
/* ZDLE escape sequences */
#define ZCRCE 'h' /* CRC next, frame ends, header follows */
#define ZCRCG 'i' /* CRC next, frame continues nonstop */
#define ZCRCQ 'j' /* CRC next, send ZACK, frame continues nonstop */
#define ZCRCW 'k' /* CRC next, send ZACK, frame ends */
#define ZRUB0 'l' /* Translate to 0x7f */
#define ZRUB1 'm' /* Translate to 0xff */
/* Implementation ***********************************************************/
/* Zmodem Events (same as frame type + data received and error events) */
#define ZME_RQINIT ZRQINIT /* Request receive init */
#define ZME_RINIT ZRINIT /* Receive init */
#define ZME_SINIT ZSINIT /* Send init sequence, define Attn */
#define ZME_ACK ZACK /* ACK */
#define ZME_FILE ZFILE /* File name, from sender */
#define ZME_SKIP ZSKIP /* Skip file command, from receiver */
#define ZME_NAK ZNAK /* Last packet was garbled */
#define ZME_ABORT ZABORT /* Abort */
#define ZME_FIN ZFIN /* Finish session */
#define ZME_RPOS ZRPOS /* Resume file from this position, from receiver */
#define ZME_DATA ZDATA /* Data packets to follow, from sender */
#define ZME_EOF ZEOF /* End of file, from sender */
#define ZME_FERR ZFERR /* Fatal i/o error, from receiver */
#define ZME_CRC ZCRC /* Request for file CRC, from receiver */
#define ZME_CHALLENGE ZCHALLENGE /* "send this number back to me", from receiver */
#define ZME_COMPL ZCOMPL /* Request is complete */
#define ZME_CAN ZCAN /* Other end cancelled with CAN-CAN-CAN-CAN-CAN */
#define ZME_FREECNT ZFREECNT /* Request for free bytes on filesystem */
#define ZME_COMMAND ZCOMMAND /* Command, from sending program */
#define ZME_STDERR ZSTDERR /* Output this message to stderr */
#define ZME_CANCEL 251 /* Received the cancelation sequence */
#define ZME_OO 252 /* Received OO, terminating the receiver */
#define ZME_DATARCVD 253 /* Data received */
#define ZME_TIMEOUT 254 /* Timeout */
#define ZME_ERROR 255 /* Protocol error */
/* Bit values for flags in struct zm_state_s */
#define ZM_FLAG_CRC32 (1 << 0) /* Use 32-bit CRC */
#define ZM_FLAG_CRKOK (1 << 1) /* CRC is okay */
#define ZM_FLAG_EOF (1 << 2) /* End of file reached */
#define ZM_FLAG_ATSIGN (1 << 3) /* Last char was '@' */
#define ZM_FLAG_ESCCTRL (1 << 4) /* Other end requests ctrl chars be escaped */
#define ZM_FLAG_ESC (1 << 5) /* Next character is escaped */
#define ZM_FLAG_WAIT (1 << 6) /* Next send should wait */
#define ZM_FLAG_APPEND (1 << 7) /* Append to the existing file */
#define ZM_FLAG_TIMEOUT (1 << 8) /* A timeout has been detected */
#define ZM_FLAG_OO (1 << 9) /* "OO" may be received */
/* The Zmodem parser success/error return code definitions:
*
* < 0 : Transfer terminated due to an error
* = 0 : Transfer still in progress
* > 0 : Transfer completed successfully
*/
#define ZM_XFRDONE 1 /* Success - Transfer complete */
/* The actual packet buffer size includes 5 bytes to hold the transfer type
* and the maxmimum size 4-byte CRC.
*/
#define ZM_PKTBUFSIZE (CONFIG_SYSTEM_ZMODEM_PKTBUFSIZE + 5)
/* Debug Definitions ********************************************************/
/* Non-standard debug selectable with CONFIG_DEBUG_ZMODEM. Debug output goes
* to stderr (not syslog). Enabling this kind of debug output if your are
* trying to use the console device I/O for file transfer is obviously a bad
* idea (unless, perhaps, you redirect stdin and stdout).
*
* See also CONFIG_SYSTEM_ZMODEM_DUMPBUFFER.
*/
#ifdef CONFIG_DEBUG_ZMODEM
# define zmprintf(format, ...) fprintf(stderr, format, ##__VA_ARGS__)
# define zmdbg(format, ...) fprintf(stderr, EXTRA_FMT format EXTRA_ARG, ##__VA_ARGS__)
#else
# undef CONFIG_SYSTEM_ZMODEM_DUMPBUFFER
# ifdef CONFIG_CPP_HAVE_VARARGS
# define zmprintf(x...)
# define zmdbg(x...)
# else
# define zmprintf (void)
# define zmdbg (void)
# endif
#endif
/****************************************************************************
* Public Types
****************************************************************************/
/* The state of the parser */
enum parser_state_e
{
PSTATE_IDLE = 0, /* Nothing in progress */
PSTATE_HEADER, /* Parsing a header following ZPAD ZDLE */
PSTATE_DATA, /* Sending/receiving data */
};
/* PSTATE_IDLE substates */
enum pidle_substate_e
{
PIDLE_ZPAD = 0, /* Waiting for ZPAD */
PIDLE_ZDLE, /* ZPAD received, waiting for ZDLE */
PIDLE_OO /* First 'O' received, waiting for second 'O' of "OO" */
};
/* PSTATE_HEADER substates */
enum pheader_substate_e
{
PHEADER_FORMAT = 0, /* Waiting for the header format {ZBIN, ZBIN32, ZHEX} */
PHEADER_PAYLOAD, /* Waiting for header data {Type Pn/Fn CRC} */
PHEADER_LSPAYLOAD, /* Waiting for LS nibble of header data (ZHEX only) */
};
/* PSTATE_DATA substates */
enum pdata_substate_e
{
PDATA_READ = 0, /* Waiting for ZDLE <packet type> */
PDATA_CRC /* Have the packet type, accumulating the CRC */
};
/* This type describes the method to perform actions at the time of
* a state transition.
*/
struct zm_state_s;
typedef int (*action_t)(FAR struct zm_state_s *pzm);
/* State transition table entry. There is one row of the table per possible state.
* Each row is a row of all reasonable events for this state and long the the
* appropriate state transition and transition action.
*/
struct zm_transition_s
{
uint8_t type; /* Event (Frame type) */
bool bdiscard; /* TRUE: discard buffered input */
uint8_t next; /* Next state */
action_t action; /* Transition action */
};
/* Common state information. This structure contains all of the top-level
* information needed by the common Zmodem receive and transmit parsing.
*/
struct zm_state_s
{
/* User-provided values ***************************************************/
/* These file/socket descriptors are used to interact with the remote end */
int fdin; /* Probably 0 (stdin) */
int fdout; /* probably 1 (stdout) */
/* System internal values *************************************************/
/* evtable[] is the state transition table that controls the state for this
* current action. Different state transitions tables are used for Zmodem
* vs. XY modem and for receive and for tansmit.
*/
FAR const struct zm_transition_s * const * evtable;
/* State information, common fields, plus parser-specific fields.
* Notes:
* (1) Only valid during parsing.
*/
uint8_t pstate; /* Current parser state */
uint8_t psubstate; /* Current parser sub-state (1) */
uint8_t state; /* Current transfer state; index into evtable[] */
uint8_t timeout; /* Timeout in seconds for incoming data */
uint8_t ncrc; /* Number of bytes in CRC: 2 or 4 (1) */
uint8_t ncan; /* Number of consecutive CAN chars received (1) */
uint8_t hdrfmt; /* Header format {ZBIN, ZBIN32, or ZHEX} */
uint8_t hdrndx; /* Index into hdrdata (1) */
uint8_t hdrdata[9]; /* 1-byte + 4-byte payload + 2- or 4-byte CRC */
uint8_t pkttype; /* Type of data packet {ZCRCW, ZCRCE, ZCRCG, ZCRCQ} */
uint16_t rcvlen; /* Number valid bytes in rcvbuf[] */
uint16_t rcvndx; /* Index to the next valid bytes in rcvbuf[] (1) */
uint16_t pktlen; /* Number valid bytes in pktbuf[] */
uint16_t flags; /* See ZM_FLAG_* definitions */
uint16_t nerrors; /* Number of data errors */
timer_t timer; /* Watchdog timer */
int remfd; /* The R/W file descritor used for communication with remote */
/* Buffers.
*
* rcvbuf - Data from the remote peer is receive this buffer
* pktbuf - un-escaped remote peer data is parsed into this buffer
* scratch - Holds data sent to the remote peer. Since the data is this
* buffer is short lived, this buffer may also be used for other
* scratch purposes.
*/
uint8_t rcvbuf[CONFIG_SYSTEM_ZMODEM_RCVBUFSIZE];
uint8_t pktbuf[ZM_PKTBUFSIZE];
uint8_t scratch[CONFIG_SYSTEM_ZMODEM_SNDBUFSIZE];
};
/* Receive state information */
struct zmr_state_s
{
/* Common state data ******************************************************/
struct zm_state_s cmn;
/* State data unique to the Zmodem receive implementation *****************/
uint8_t rcaps; /* Receiver capabilities */
uint8_t scaps; /* Sender capabilities */
uint8_t f0; /* Transfer flag F0 */
uint8_t f1; /* Transfer flag F1 */
#if 0 /* Not used */
uint8_t f2; /* Transfer flag F2 */
uint8_t f3; /* Transfer flag F3 */
#endif
uint8_t ntimeouts; /* Number of timeouts */
uint32_t crc; /* Remove file CRC */
FAR char *filename; /* Local filename */
FAR char *attn; /* Attention string received from remote peer */
off_t offset; /* Current file offset */
off_t filesize; /* Remote file size */
#ifdef CONFIG_SYSTEM_ZMODEM_TIMESTAMPS
time_t timestamp; /* Remote time stamp */
#endif
int outfd; /* Local output file descriptor */
};
/* Send state information */
struct zms_state_s
{
/* Common state data ******************************************************/
struct zm_state_s cmn;
/* State data unique to the Zmodem send implementation ********************/
uint8_t dpkttype; /* Streaming data packet type: ZCRCG, ZCRCQ, or ZCRCW */
uint8_t fflags[4]; /* File xfer flags */
uint16_t rcvmax; /* Max packet size the remote can receive. */
#ifdef CONFIG_SYSTEM_ZMODEM_TIMESTAMPS
uint32_t timestamp; /* Local file timestamp */
#endif
#ifdef CONFIG_SYSTEM_ZMODEM_SENDATTN
FAR char *attn; /* Attention string */
#endif
FAR const char *filename; /* Local filename */
FAR const char *rfilename; /* Remote filename */
off_t offset; /* Current file offset */
off_t lastoffs; /* Last acknowledged file offset */
off_t zrpos; /* Last offset from ZRPOS */
off_t filesize; /* Size of the file to send */
int infd; /* Local input file descriptor */
};
/****************************************************************************
* Public Data
****************************************************************************/
#undef EXTERN
#if defined(__cplusplus)
#define EXTERN extern "C"
extern "C"
{
#else
#define EXTERN extern
#endif
/* A handy sequence of 4 zeros */
EXTERN const uint8_t g_zeroes[4];
/* Paragraph 8.4. Session Abort Sequence
*
* "If the receiver is receiving data in streaming mode, the Attn sequence
* is executed to interrupt data transmission before the Cancel sequence is
* sent. The Cancel sequence consists of eight CAN characters and ten
* backspace characters. ZMODEM only requires five Cancel characters, the
* other three are "insurance".
*
* "The trailing backspace characters attempt to erase the effects of the
* CAN characters if they are received by a command interpreter.
*/
#define CANISTR_SIZE (8+10)
EXTERN const uint8_t g_canistr[CANISTR_SIZE];
/****************************************************************************
* Public Function Prototypes
****************************************************************************/
/****************************************************************************
* Name: zm_bytobe32
*
* Description:
* Convert a sequence of four bytes into a 32-bit value. The byte
* sequence is assumed to be big-endian.
*
****************************************************************************/
uint32_t zm_bytobe32(FAR const uint8_t *val8);
/****************************************************************************
* Name: zm_bytobe32
*
* Description:
* Convert a 32-bit value in a sequence of four bytes in big-endian byte
* order.
*
****************************************************************************/
void zm_be32toby(uint32_t val32, FAR uint8_t *val8);
/****************************************************************************
* Name: zm_encnibble
*
* Description:
* Encode an 4-bit binary value to a single hex "digit".
*
****************************************************************************/
char zm_encnibble(uint8_t nibble);
/****************************************************************************
* Name: zm_encnibble
*
* Description:
* Decode an 4-bit binary value from a single hex "digit".
*
****************************************************************************/
uint8_t zm_decnibble(char hex);
/****************************************************************************
* Name: zm_puthex8
*
* Description:
* Convert an 8-bit binary value to 2 hex "digits".
*
****************************************************************************/
FAR uint8_t *zm_puthex8(FAR uint8_t *ptr, uint8_t ch);
/****************************************************************************
* Name: zm_read
*
* Description:
* Read a buffer of data from a read-able stream.
*
****************************************************************************/
ssize_t zm_read(int fd, FAR uint8_t *buffer, size_t buflen);
/****************************************************************************
* Name: zm_getc
*
* Description:
* Read a one byte of data from a read-able stream.
*
****************************************************************************/
int zm_getc(int fd);
/****************************************************************************
* Name: zm_write
*
* Description:
* Write a buffer of data to a write-able stream.
*
****************************************************************************/
ssize_t zm_write(int fd, FAR const uint8_t *buffer, size_t buflen);
/****************************************************************************
* Name: zm_remwrite
*
* Description:
* Write a buffer of data to the remote peer.
*
****************************************************************************/
#ifdef CONFIG_SYSTEM_ZMODEM_DUMPBUFFER
ssize_t zm_remwrite(int fd, FAR const uint8_t *buffer, size_t buflen);
#else
# define zm_remwrite(f,b,s) zm_write(f,b,s)
#endif
/****************************************************************************
* Name: zm_writefile
*
* Description:
* Write a buffer of data to file, performing newline conversions as
* necessary.
*
* NOTE: Not re-entrant. CR-LF sequences that span buffer boundaries are
* not guaranteed to to be handled correctly.
*
****************************************************************************/
int zm_writefile(int fd, FAR const uint8_t *buffer, size_t buflen, bool zcnl);
/****************************************************************************
* Name: zm_filecrc
*
* Description:
* Perform CRC32 calculation on a file.
*
* Assumptions:
* The allocated I/O buffer is available to buffer file data.
*
****************************************************************************/
uint32_t zm_filecrc(FAR struct zm_state_s *pzm, FAR const char *filename);
/****************************************************************************
* Name: zm_putzdle
*
* Description:
* Transfer a value to a buffer performing ZDLE escaping if necessary
*
* Input Parameters:
* pzm - Zmodem session state
* buffer - Buffer in which to add the possibly escaped character
* ch - The raw, unescaped character to be added
*
****************************************************************************/
FAR uint8_t *zm_putzdle(FAR struct zm_state_s *pzm, FAR uint8_t *buffer,
uint8_t ch);
/****************************************************************************
* Name: zm_senddata
*
* Description:
* Send data to the remote peer performing CRC operations as necessary
* (ZBIN or ZBIN32 format assumed, ZCRCW terminator is always used)
*
* Input Parameters:
* pzm - Zmodem session state
* buffer - Buffer of data to be sent
* buflen - The number of bytes in buffer to be sent
*
****************************************************************************/
int zm_senddata(FAR struct zm_state_s *pzm, FAR const uint8_t *buffer,
size_t buflen);
/****************************************************************************
* Name: zm_sendhexhdr
*
* Description:
* Send a ZHEX header to the remote peer performing CRC operations as
* necessary.
*
* Input Parameters:
* pzm - Zmodem session state
* type - Header type {ZRINIT, ZRQINIT, ZDATA, ZACK, ZNAK, ZCRC, ZRPOS,
* ZCOMPL, ZEOF, ZFIN}
* buffer - 4-byte buffer of data to be sent
*
* Assumptions:
* The allocated I/O buffer is available to buffer file data.
*
****************************************************************************/
int zm_sendhexhdr(FAR struct zm_state_s *pzm, int type,
FAR const uint8_t *buffer);
/****************************************************************************
* Name: zm_sendbin16hdr
*
* Description:
* Send a ZBIN header to the remote peer performing CRC operations as
* necessary. Normally called indirectly through zm_sendbinhdr().
*
* Input Parameters:
* pzm - Zmodem session state
* type - Header type {ZSINIT, ZFILE, ZDATA, ZDATA}
* buffer - 4-byte buffer of data to be sent
*
* Assumptions:
* The allocated I/O buffer is available to buffer file data.
*
****************************************************************************/
int zm_sendbin16hdr(FAR struct zm_state_s *pzm, int type,
FAR const uint8_t *buffer);
/****************************************************************************
* Name: zm_sendbin32hdr
*
* Description:
* Send a ZBIN32 header to the remote peer performing CRC operations as
* necessary. Normally called indirectly through zm_sendbinhdr().
*
* Input Parameters:
* pzm - Zmodem session state
* type - Header type {ZSINIT, ZFILE, ZDATA, ZDATA}
* buffer - 4-byte buffer of data to be sent
*
* Assumptions:
* The allocated I/O buffer is available to buffer file data.
*
****************************************************************************/
int zm_sendbin32hdr(FAR struct zm_state_s *pzm, int type,
FAR const uint8_t *buffer);
/****************************************************************************
* Name: zm_sendbinhdr
*
* Description:
* Send a binary header to the remote peer. This is a simple wrapping
* function for zm_sendbin16hdr() and zm_sendbin32hdr(). It decides on
* the correct CRC format and re-directs the call appropriately.
*
* Input Parameters:
* pzm - Zmodem session state
* type - Header type {ZSINIT, ZFILE, ZDATA, ZDATA}
* buffer - 4-byte buffer of data to be sent
*
* Assumptions:
* The allocated I/O buffer is available to buffer file data.
*
****************************************************************************/
int zm_sendbinhdr(FAR struct zm_state_s *pzm, int type,
FAR const uint8_t *buffer);
/****************************************************************************
* Name: zm_datapump
*
* Description:
* Drive the Zmodem state machine by reading data from the remote peer and
* providing that data to the parser. This loop runs until a fatal error
* is detected or until the state machine reports that the transfer has
* completed successfully.
*
****************************************************************************/
int zm_datapump(FAR struct zm_state_s *pzm);
/****************************************************************************
* Name: zm_readstate
*
* Description:
* Enter PSTATE_DATA.
*
****************************************************************************/
void zm_readstate(FAR struct zm_state_s *pzm);
/****************************************************************************
* Name: zm_timeout
*
* Description:
* Called by the watchdog logic if/when a timeout is detected.
*
****************************************************************************/
int zm_timeout(FAR struct zm_state_s *pzm);
/****************************************************************************
* Name: zm_rcvpending
*
* Description:
* Return true if data from the remote receiver is pending. In that case,
* the local sender should stop data streaming operations and process the
* incoming data.
*
****************************************************************************/
#ifdef CONFIG_SYSTEM_ZMODEM_RCVSAMPLE
bool zm_rcvpending(FAR struct zm_state_s *pzm);
#endif
/****************************************************************************
* Name: zm_timerinit
*
* Description:
* Create the POSIX timer used to manage timeouts and attach the SIGALRM
* signal handler to catch the timeout events.
*
****************************************************************************/
int zm_timerinit(FAR struct zm_state_s *pzm);
/****************************************************************************
* Name: zm_timerstart
*
* Description:
* Start, restart, or stop the timer.
*
****************************************************************************/
int zm_timerstart(FAR struct zm_state_s *pzm, unsigned int sec);
/****************************************************************************
* Name: zm_timerstop
*
* Description:
* Stop the timer.
*
****************************************************************************/
#define zm_timerstop(p) zm_timerstart(p,0)
/****************************************************************************
* Name: zm_timerrelease
*
* Description:
* Destroy the timer and and detach the signal handler.
*
****************************************************************************/
int zm_timerrelease(FAR struct zm_state_s *pzm);
/****************************************************************************
* Name: zm_dumpbuffer
*
* Description:
* Dump a buffer of zmodem data.
*
****************************************************************************/
#ifdef CONFIG_SYSTEM_ZMODEM_DUMPBUFFER
void zm_dumpbuffer(FAR const char *msg, FAR const void *buffer, size_t buflen);
#else
# define zm_dumpbuffer(m,b,s)
#endif
#undef EXTERN
#if defined(__cplusplus)
}
#endif
#endif /* __APPS_SYSTEM_XMODEM_ZM_H */
