/************************************************************************************
* arch/arm/src/lpc17xx/lpc17_gpio.h
*
* Copyright (C) 2010 Gregory Nutt. All rights reserved.
* Author: Gregory Nutt <gnutt@nuttx.org>
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions
* are met:
*
* 1. Redistributions of source code must retain the above copyright
* notice, this list of conditions and the following disclaimer.
* 2. Redistributions in binary form must reproduce the above copyright
* notice, this list of conditions and the following disclaimer in
* the documentation and/or other materials provided with the
* distribution.
* 3. Neither the name NuttX nor the names of its contributors may be
* used to endorse or promote products derived from this software
* without specific prior written permission.
*
* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
* "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
* LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
* FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE
* COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
* INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING,
* BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS
* OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED
* AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
* LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
* ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
* POSSIBILITY OF SUCH DAMAGE.
*
************************************************************************************/
#ifndef __ARCH_ARM_SRC_LPC17XX_LPC17_GPIO_H
#define __ARCH_ARM_SRC_LPC17XX_LPC17_GPIO_H
/************************************************************************************
* Included Files
************************************************************************************/
#include <nuttx/config.h>
#include "chip.h"
#include "lpc17_memorymap.h"
/************************************************************************************
* Pre-processor Definitions
************************************************************************************/
/* Register offsets *****************************************************************/
/* GPIO block register offsets ******************************************************/
#define LPC17_FIO0_OFFSET 0x0000
#define LPC17_FIO1_OFFSET 0x0020
#define LPC17_FIO2_OFFSET 0x0040
#define LPC17_FIO3_OFFSET 0x0060
#define LPC17_FIO4_OFFSET 0x0080
#define LPC17_FIO_DIR_OFFSET 0x0000 /* Fast GPIO Port Direction control */
#define LPC17_FIO_MASK_OFFSET 0x0010 /* Fast Mask register for ports */
#define LPC17_FIO_PIN_OFFSET 0x0014 /* Fast Port Pin value registers */
#define LPC17_FIO_SET_OFFSET 0x0018 /* Fast Port Output Set registers */
#define LPC17_FIO_CLR_OFFSET 0x001c /* Fast Port Output Clear register */
/* GPIO interrupt block register offsets ********************************************/
#define LPC17_GPIOINT_OFFSET(n) (0x10*(n) + 0x80)
#define LPC17_GPIOINT0_OFFSET 0x0080
#define LPC17_GPIOINT2_OFFSET 0x00a0
#define LPC17_GPIOINT_IOINTSTATUS_OFFSET 0x0000 /* GPIO overall Interrupt Status */
#define LPC17_GPIOINT_INTSTATR_OFFSET 0x0004 /* GPIO Interrupt Status Rising edge */
#define LPC17_GPIOINT_INTSTATF_OFFSET 0x0008 /* GPIO Interrupt Status Falling edge */
#define LPC17_GPIOINT_INTCLR_OFFSET 0x000c /* GPIO Interrupt Clear */
#define LPC17_GPIOINT_INTENR_OFFSET 0x0010 /* GPIO Interrupt Enable Rising edge */
#define LPC17_GPIOINT_INTENF_OFFSET 0x0014 /* GPIO Interrupt Enable Falling edge */
/* Register addresses ***************************************************************/
/* GPIO block register addresses ****************************************************/
#define LPC17_FIO_BASE(n) (LPC17_GPIO_BASE+LPC17_GPIOINT_OFFSET(n))
#define LPC17_FIO0_BASE (LPC17_GPIO_BASE+LPC17_FIO0_OFFSET)
#define LPC17_FIO1_BASE (LPC17_GPIO_BASE+LPC17_FIO1_OFFSET)
#define LPC17_FIO2_BASE (LPC17_GPIO_BASE+LPC17_FIO2_OFFSET)
#define LPC17_FIO3_BASE (LPC17_GPIO_BASE+LPC17_FIO3_OFFSET)
#define LPC17_FIO4_BASE (LPC17_GPIO_BASE+LPC17_FIO4_OFFSET)
#define LPC17_FIO_DIR(n) (LPC17_FIO_BASE(n)+LPC17_FIO_DIR_OFFSET)
#define LPC17_FIO_MASK(n) (LPC17_FIO_BASE(n)+LPC17_FIO_MASK_OFFSET)
#define LPC17_FIO_PIN(n) (LPC17_FIO_BASE(n)+LPC17_FIO_PIN_OFFSET)
#define LPC17_FIO_SET(n) (LPC17_FIO_BASE(n)+LPC17_FIO_SET_OFFSET)
#define LPC17_FIO_CLR(n) (LPC17_FIO_BASE(n)+LPC17_FIO_CLR_OFFSET)
#define LPC17_FIO0_DIR (LPC17_FIO0_BASE+LPC17_FIO_DIR_OFFSET)
#define LPC17_FIO0_MASK (LPC17_FIO0_BASE+LPC17_FIO_MASK_OFFSET)
#define LPC17_FIO0_PIN (LPC17_FIO0_BASE+LPC17_FIO_PIN_OFFSET)
#define LPC17_FIO0_SET (LPC17_FIO0_BASE+LPC17_FIO_SET_OFFSET)
#define LPC17_FIO0_CLR (LPC17_FIO0_BASE+LPC17_FIO_CLR_OFFSET)
#define LPC17_FIO1_DIR (LPC17_FIO1_BASE+LPC17_FIO_DIR_OFFSET)
#define LPC17_FIO1_MASK (LPC17_FIO1_BASE+LPC17_FIO_MASK_OFFSET)
#define LPC17_FIO1_PIN (LPC17_FIO1_BASE+LPC17_FIO_PIN_OFFSET)
#define LPC17_FIO1_SET (LPC17_FIO1_BASE+LPC17_FIO_SET_OFFSET)
#define LPC17_FIO1_CLR (LPC17_FIO1_BASE+LPC17_FIO_CLR_OFFSET)
#define LPC17_FIO2_DIR (LPC17_FIO2_BASE+LPC17_FIO_DIR_OFFSET)
#define LPC17_FIO2_MASK (LPC17_FIO2_BASE+LPC17_FIO_MASK_OFFSET)
#define LPC17_FIO2_PIN (LPC17_FIO2_BASE+LPC17_FIO_PIN_OFFSET)
#define LPC17_FIO2_SET (LPC17_FIO2_BASE+LPC17_FIO_SET_OFFSET)
#define LPC17_FIO2_CLR (LPC17_FIO2_BASE+LPC17_FIO_CLR_OFFSET)
#define LPC17_FIO3_DIR (LPC17_FIO3_BASE+LPC17_FIO_DIR_OFFSET)
#define LPC17_FIO3_MASK (LPC17_FIO3_BASE+LPC17_FIO_MASK_OFFSET)
#define LPC17_FIO3_PIN (LPC17_FIO3_BASE+LPC17_FIO_PIN_OFFSET)
#define LPC17_FIO3_SET (LPC17_FIO3_BASE+LPC17_FIO_SET_OFFSET)
#define LPC17_FIO3_CLR (LPC17_FIO3_BASE+LPC17_FIO_CLR_OFFSET)
#define LPC17_FIO4_DIR (LPC17_FIO4_BASE+LPC17_FIO_DIR_OFFSET)
#define LPC17_FIO4_MASK (LPC17_FIO4_BASE+LPC17_FIO_MASK_OFFSET)
#define LPC17_FIO4_PIN (LPC17_FIO4_BASE+LPC17_FIO_PIN_OFFSET)
#define LPC17_FIO4_SET (LPC17_FIO4_BASE+LPC17_FIO_SET_OFFSET)
#define LPC17_FIO4_CLR (LPC17_FIO4_BASE+LPC17_FIO_CLR_OFFSET)
/* GPIO interrupt block register addresses ******************************************/
#define LPC17_GPIOINTn_BASE(n) (LPC17_GPIOINT_BASE+LPC17_GPIOINT_OFFSET(n))
#define LPC17_GPIOINT0_BASE (LPC17_GPIOINT_BASE+LPC17_GPIOINT0_OFFSET)
#define LPC17_GPIOINT2_BASE (LPC17_GPIOINT_BASE+LPC17_GPIOINT2_OFFSET)
#define LPC17_GPIOINT_IOINTSTATUS (LPC17_GPIOINT0_BASE+LPC17_GPIOINT_IOINTSTATUS_OFFSET)
#define LPC17_GPIOINT_INTSTATR(n) (LPC17_GPIOINTn_BASE(n)+LPC17_GPIOINT_INTSTATR_OFFSET)
#define LPC17_GPIOINT_INTSTATF(n) (LPC17_GPIOINTn_BASE(n)+LPC17_GPIOINT_INTSTATF_OFFSET)
#define LPC17_GPIOINT_INTCLR(n) (LPC17_GPIOINTn_BASE(n)+LPC17_GPIOINT_INTCLR_OFFSET)
#define LPC17_GPIOINT_INTENR(n) (LPC17_GPIOINTn_BASE(n)+LPC17_GPIOINT_INTENR_OFFSET)
#define LPC17_GPIOINT_INTENF(n) (LPC17_GPIOINTn_BASE(n)+LPC17_GPIOINT_INTENF_OFFSET)
/* Pins P0.0-31 (P0.12-14 nad P0.31 are reserved) */
#define LPC17_GPIOINT0_INTSTATR (LPC17_GPIOINT0_BASE+LPC17_GPIOINT_INTSTATR_OFFSET)
#define LPC17_GPIOINT0_INTSTATF (LPC17_GPIOINT0_BASE+LPC17_GPIOINT_INTSTATF_OFFSET)
#define LPC17_GPIOINT0_INTCLR (LPC17_GPIOINT0_BASE+LPC17_GPIOINT_INTCLR_OFFSET)
#define LPC17_GPIOINT0_INTENR (LPC17_GPIOINT0_BASE+LPC17_GPIOINT_INTENR_OFFSET)
#define LPC17_GPIOINT0_INTENF (LPC17_GPIOINT0_BASE+LPC17_GPIOINT_INTENF_OFFSET)
/* Pins P2.0-13 (P0.14-31 are reserved) */
#define LPC17_GPIOINT2_INTSTATR (LPC17_GPIOINT2_BASE+LPC17_GPIOINT_INTSTATR_OFFSET)
#define LPC17_GPIOINT2_INTSTATF (LPC17_GPIOINT2_BASE+LPC17_GPIOINT_INTSTATF_OFFSET)
#define LPC17_GPIOINT2_INTCLR (LPC17_GPIOINT2_BASE+LPC17_GPIOINT_INTCLR_OFFSET)
#define LPC17_GPIOINT2_INTENR (LPC17_GPIOINT2_BASE+LPC17_GPIOINT_INTENR_OFFSET)
#define LPC17_GPIOINT2_INTENF (LPC17_GPIOINT2_BASE+LPC17_GPIOINT_INTENF_OFFSET)
/* Register bit definitions *********************************************************/
/* GPIO block register bit definitions **********************************************/
/* Fast GPIO Port Direction control registers (FIODIR) */
/* Fast Mask register for ports (FIOMASK) */
/* Fast Port Pin value registers using FIOMASK (FIOPIN) */
/* Fast Port Output Set registers using FIOMASK (FIOSET) */
/* Fast Port Output Clear register using FIOMASK (FIOCLR) */
#define FIO(n) (1 << (n)) /* n=0,1,..31 */
/* GPIO interrupt block register bit definitions ************************************/
/* GPIO overall Interrupt Status (IOINTSTATUS) */
#define GPIOINT_IOINTSTATUS_P0INT (1 << 0) /* Bit 0: Port 0 GPIO interrupt pending */
/* Bit 1: Reserved */
#define GPIOINT_IOINTSTATUS_P2INT (1 << 2) /* Bit 2: Port 2 GPIO interrupt pending */
/* Bits 3-31: Reserved */
/* GPIO Interrupt Status for Rising edge (INTSTATR)
* GPIO Interrupt Status for Falling edge (INTSTATF)
* GPIO Interrupt Clear (INTCLR)
* GPIO Interrupt Enable for Rising edge (INTENR)
* GPIO Interrupt Enable for Falling edge (INTENF)
*/
#define GPIOINT(n) (1 << (n)) /* n=0,1,..31 */
/************************************************************************************
* Public Types
************************************************************************************/
/************************************************************************************
* Public Data
************************************************************************************/
/************************************************************************************
* Public Functions
************************************************************************************/
#endif /* __ARCH_ARM_SRC_LPC17XX_LPC17_GPIO_H */
