|
|
/************************************************************************************************
* arch/arm/src/lpc31xx/lpc31_usbotg.h
*
* Copyright (C) 2009-2011 Gregory Nutt. All rights reserved.
* Author: Gregory Nutt <gnutt@nuttx.org>
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions
* are met:
*
* 1. Redistributions of source code must retain the above copyright
* notice, this list of conditions and the following disclaimer.
* 2. Redistributions in binary form must reproduce the above copyright
* notice, this list of conditions and the following disclaimer in
* the documentation and/or other materials provided with the
* distribution.
* 3. Neither the name NuttX nor the names of its contributors may be
* used to endorse or promote products derived from this software
* without specific prior written permission.
*
* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
* "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
* LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
* FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE
* COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
* INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING,
* BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS
* OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED
* AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
* LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
* ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
* POSSIBILITY OF SUCH DAMAGE.
*
************************************************************************************************/
#ifndef __ARCH_ARM_SRC_LPC31XX_LPC31_USBOTG_H
#define __ARCH_ARM_SRC_LPC31XX_LPC31_USBOTG_H
/************************************************************************************************
* Included Files
************************************************************************************************/
#include <nuttx/config.h>
#include "lpc31_memorymap.h"
/************************************************************************************************
* Pre-processor Definitions
************************************************************************************************/
#define LPC31_EHCI_NRHPORT 1 /* There is only a single root hub port */
/* USBOTG register base address offset into the USBOTG domain ***********************************/
#define LPC31_USBOTG_VBASE (LPC31_USBOTG_VSECTION)
#define LPC31_USBOTG_PBASE (LPC31_USBOTG_PSECTION)
/* USBOTG register offsets (with respect to the base of the USBOTG domain) **********************/
/* 0x000 - 0x0ff: Reserved */
/* Device/host capability registers */
#define LPC31_USBOTG_HCCR_OFFSET 0x100 /* Offset to EHCI Host Controller Capabiliy registers */
#define LPC31_USBOTG_CAPLENGTH_OFFSET 0x100 /* Capability register length (8-bit) */
#define LPC31_USBHOST_HCIVERSION_OFFSET 0x102 /* Host interface version number (16-bit) */
#define LPC31_USBHOST_HCSPARAMS_OFFSET 0x104 /* Host controller structural parameters */
#define LPC31_USBHOST_HCCPARAMS_OFFSET 0x108 /* Host controller capability parameters */
#define LPC31_USBDEV_DCIVERSION_OFFSET 0x120 /* Device interface version number */
#define LPC31_USBDEV_DCCPARAMS_OFFSET 0x124 /* Device controller capability parameters */
/* Device/host/OTG operational registers */
#define LPC31_USBOTG_HCOR_OFFSET 0x140 /* Offset to EHCI Host Controller Operational Registers */
#define LPC31_USBOTG_USBCMD_OFFSET 0x140 /* USB command (both) */
#define LPC31_USBOTG_USBSTS_OFFSET 0x144 /* USB status (both) */
#define LPC31_USBOTG_USBINTR_OFFSET 0x148 /* USB interrupt enable (both) */
#define LPC31_USBOTG_FRINDEX_OFFSET 0x14C /* USB frame index (both) */
/* EHCI 4G Segment Selector (not supported) */
#define LPC31_USBOTG_PERIODICLIST_OFFSET 0x154 /* Frame list base address (host) */
#define LPC31_USBOTG_DEVICEADDR_OFFSET 0x154 /* USB device address (device) */
#define LPC31_USBOTG_ASYNCLISTADDR_OFFSET 0x158 /* Next asynchronous list address (host) */
#define LPC31_USBOTG_ENDPOINTLIST_OFFSET 0x158 /* Address of endpoint list in memory (device) */
#define LPC31_USBOTG_TTCTRL_OFFSET 0x15C /* Asynchronous buffer status for embedded TT (host) */
#define LPC31_USBOTG_BURSTSIZE_OFFSET 0x160 /* Programmable burst size (both) */
#define LPC31_USBOTG_TXFILLTUNING_OFFSET 0x164 /* Host transmit pre-buffer packet tuning (host) */
#define LPC31_USBOTG_BINTERVAL_OFFSET 0x174 /* Length of virtual frame (both) */
#define LPC31_USBOTG_ENDPTNAK_OFFSET 0x178 /* Endpoint NAK (device) */
#define LPC31_USBOTG_ENDPTNAKEN_OFFSET 0x17C /* Endpoint NAK Enable (device) */
#define LPC31_USBOTG_CONFIGFLAG_OFFSET 0x180 /* Configured flag register (not used in lpc313x) */
#define LPC31_USBOTG_PORTSC1_OFFSET 0x184 /* Port status/control 1 (both) */
#define LPC31_USBOTG_OTGSC_OFFSET 0x1A4 /* OTG status and control (otg) */
#define LPC31_USBOTG_USBMODE_OFFSET 0x1A8 /* USB device mode (both) */
#define LPC31_USBDEV_USBCMD_OFFSET 0x140 /* USB command (both) */
#define LPC31_USBDEV_USBSTS_OFFSET 0x144 /* USB status (both) */
#define LPC31_USBDEV_USBINTR_OFFSET 0x148 /* USB interrupt enable (both) */
#define LPC31_USBDEV_FRINDEX_OFFSET 0x14C /* USB frame index (both) */
#define LPC31_USBDEV_DEVICEADDR_OFFSET 0x154 /* USB device address (device) */
#define LPC31_USBDEV_ENDPOINTLIST_OFFSET 0x158 /* Address of endpoint list in memory (device) */
#define LPC31_USBDEV_BURSTSIZE_OFFSET 0x160 /* Programmable burst size (both) */
#define LPC31_USBDEV_BINTERVAL_OFFSET 0x174 /* Length of virtual frame (both) */
#define LPC31_USBDEV_ENDPTNAK_OFFSET 0x178 /* Endpoint NAK (device) */
#define LPC31_USBDEV_ENDPTNAKEN_OFFSET 0x17C /* Endpoint NAK Enable (device) */
#define LPC31_USBDEV_PORTSC1_OFFSET 0x184 /* Port status/control 1 (both) */
#define LPC31_USBDEV_USBMODE_OFFSET 0x1A8 /* USB device mode (both) */
#define LPC31_USBHOST_USBCMD_OFFSET 0x140 /* USB command (both) */
#define LPC31_USBHOST_USBSTS_OFFSET 0x144 /* USB status (both) */
#define LPC31_USBHOST_USBINTR_OFFSET 0x148 /* USB interrupt enable (both) */
#define LPC31_USBHOST_FRINDEX_OFFSET 0x14C /* USB frame index (both) */
#define LPC31_USBHOST_PERIODICLIST_OFFSET 0x154 /* Frame list base address (host) */
#define LPC31_USBHOST_ASYNCLISTADDR_OFFSET 0x158 /* Next asynchronous list address (host) */
#define LPC31_USBHOST_TTCTRL_OFFSET 0x15C /* Asynchronous buffer status for embedded TT (host) */
#define LPC31_USBHOST_BURSTSIZE_OFFSET 0x160 /* Programmable burst size (both) */
#define LPC31_USBHOST_TXFILLTUNING_OFFSET 0x164 /* Host transmit pre-buffer packet tuning (host) */
#define LPC31_USBHOST_BINTERVAL_OFFSET 0x174 /* Length of virtual frame (both) */
#define LPC31_USBHOST_PORTSC1_OFFSET 0x184 /* Port status/control 1 (both) */
#define LPC31_USBHOST_USBMODE_OFFSET 0x1A8 /* USB device mode (both) */
/* Device endpoint registers */
#define LPC31_USBDEV_ENDPTSETUPSTAT_OFFSET 0x1AC /* Endpoint setup status */
#define LPC31_USBDEV_ENDPTPRIME_OFFSET 0x1B0 /* Endpoint initialization */
#define LPC31_USBDEV_ENDPTFLUSH_OFFSET 0x1B4 /* Endpoint de-initialization */
#define LPC31_USBDEV_ENDPTSTATUS_OFFSET 0x1B8 /* Endpoint status */
#define LPC31_USBDEV_ENDPTCOMPLETE_OFFSET 0x1BC /* Endpoint complete */
#define LPC31_USBDEV_ENDPTCTRL0_OFFSET 0x1C0 /* Endpoint control 0 */
#define LPC31_USBDEV_ENDPTCTRL1_OFFSET 0x1C4 /* Endpoint control 1 */
#define LPC31_USBDEV_ENDPTCTRL2_OFFSET 0x1C8 /* Endpoint control 2 */
#define LPC31_USBDEV_ENDPTCTRL3_OFFSET 0x1CC /* Endpoint control 3 */
/* USBOTG register (virtual) addresses **********************************************************/
/* Device/host capability registers */
#define LPC31_USBOTG_HCCR_BASE (LPC31_USBOTG_VBASE+LPC31_USBOTG_HCCR_OFFSET)
#define LPC31_USBOTG_CAPLENGTH (LPC31_USBOTG_VBASE+LPC31_USBOTG_CAPLENGTH_OFFSET)
#define LPC31_USBHOST_HCIVERSION (LPC31_USBOTG_VBASE+LPC31_USBHOST_HCIVERSION_OFFSET)
#define LPC31_USBHOST_HCSPARAMS (LPC31_USBOTG_VBASE+LPC31_USBHOST_HCSPARAMS_OFFSET)
#define LPC31_USBHOST_HCCPARAMS (LPC31_USBOTG_VBASE+LPC31_USBHOST_HCCPARAMS_OFFSET)
#define LPC31_USBDEV_DCIVERSION (LPC31_USBOTG_VBASE+LPC31_USBDEV_DCIVERSION_OFFSET)
#define LPC31_USBDEV_DCCPARAMS (LPC31_USBOTG_VBASE+LPC31_USBDEV_DCCPARAMS_OFFSET)
/* Device/host operational registers */
#define LPC31_USBOTG_HCOR_BASE (LPC31_USBOTG_VBASE+LPC31_USBOTG_HCOR_OFFSET)
#define LPC31_USBOTG_USBCMD (LPC31_USBOTG_VBASE+LPC31_USBOTG_USBCMD_OFFSET)
#define LPC31_USBOTG_USBSTS (LPC31_USBOTG_VBASE+LPC31_USBOTG_USBSTS_OFFSET)
#define LPC31_USBOTG_USBINTR (LPC31_USBOTG_VBASE+LPC31_USBOTG_USBINTR_OFFSET)
#define LPC31_USBOTG_FRINDEX (LPC31_USBOTG_VBASE+LPC31_USBOTG_FRINDEX_OFFSET)
#define LPC31_USBOTG_PERIODICLIST (LPC31_USBOTG_VBASE+LPC31_USBOTG_PERIODICLIST_OFFSET)
#define LPC31_USBOTG_DEVICEADDR (LPC31_USBOTG_VBASE+LPC31_USBOTG_DEVICEADDR_OFFSET)
#define LPC31_USBOTG_ASYNCLISTADDR (LPC31_USBOTG_VBASE+LPC31_USBOTG_ASYNCLISTADDR_OFFSET)
#define LPC31_USBOTG_ENDPOINTLIST (LPC31_USBOTG_VBASE+LPC31_USBOTG_ENDPOINTLIST_OFFSET)
#define LPC31_USBOTG_TTCTRL (LPC31_USBOTG_VBASE+LPC31_USBOTG_TTCTRL_OFFSET)
#define LPC31_USBOTG_BURSTSIZE (LPC31_USBOTG_VBASE+LPC31_USBOTG_BURSTSIZE_OFFSET)
#define LPC31_USBOTG_TXFILLTUNING (LPC31_USBOTG_VBASE+LPC31_USBOTG_TXFILLTUNING_OFFSET)
#define LPC31_USBOTG_BINTERVAL (LPC31_USBOTG_VBASE+LPC31_USBOTG_BINTERVAL_OFFSET)
#define LPC31_USBOTG_ENDPTNAK (LPC31_USBOTG_VBASE+LPC31_USBOTG_ENDPTNAK_OFFSET)
#define LPC31_USBOTG_ENDPTNAKEN (LPC31_USBOTG_VBASE+LPC31_USBOTG_ENDPTNAKEN_OFFSET)
#define LPC31_USBOTG_PORTSC1 (LPC31_USBOTG_VBASE+LPC31_USBOTG_PORTSC1_OFFSET)
#define LPC31_USBOTG_OTGSC (LPC31_USBOTG_VBASE+LPC31_USBOTG_OTGSC_OFFSET)
#define LPC31_USBOTG_USBMODE (LPC31_USBOTG_VBASE+LPC31_USBOTG_USBMODE_OFFSET)
#define LPC31_USBDEV_USBCMD (LPC31_USBOTG_VBASE+LPC31_USBDEV_USBCMD_OFFSET)
#define LPC31_USBDEV_USBSTS (LPC31_USBOTG_VBASE+LPC31_USBDEV_USBSTS_OFFSET)
#define LPC31_USBDEV_USBINTR (LPC31_USBOTG_VBASE+LPC31_USBDEV_USBINTR_OFFSET)
#define LPC31_USBDEV_FRINDEX (LPC31_USBOTG_VBASE+LPC31_USBDEV_FRINDEX_OFFSET)
#define LPC31_USBDEV_DEVICEADDR (LPC31_USBOTG_VBASE+LPC31_USBDEV_DEVICEADDR_OFFSET)
#define LPC31_USBDEV_ENDPOINTLIST (LPC31_USBOTG_VBASE+LPC31_USBDEV_ENDPOINTLIST_OFFSET)
#define LPC31_USBDEV_BURSTSIZE (LPC31_USBOTG_VBASE+LPC31_USBDEV_BURSTSIZE_OFFSET)
#define LPC31_USBDEV_BINTERVAL (LPC31_USBOTG_VBASE+LPC31_USBDEV_BINTERVAL_OFFSET)
#define LPC31_USBDEV_ENDPTNAK (LPC31_USBOTG_VBASE+LPC31_USBDEV_ENDPTNAK_OFFSET)
#define LPC31_USBDEV_ENDPTNAKEN (LPC31_USBOTG_VBASE+LPC31_USBDEV_ENDPTNAKEN_OFFSET)
#define LPC31_USBDEV_PORTSC1 (LPC31_USBOTG_VBASE+LPC31_USBDEV_PORTSC1_OFFSET)
#define LPC31_USBDEV_USBMODE (LPC31_USBOTG_VBASE+LPC31_USBDEV_USBMODE_OFFSET)
#define LPC31_USBHOST_USBCMD (LPC31_USBOTG_VBASE+LPC31_USBHOST_USBCMD_OFFSET)
#define LPC31_USBHOST_USBSTS (LPC31_USBOTG_VBASE+LPC31_USBHOST_USBSTS_OFFSET)
#define LPC31_USBHOST_USBINTR (LPC31_USBOTG_VBASE+LPC31_USBHOST_USBINTR_OFFSET)
#define LPC31_USBHOST_FRINDEX (LPC31_USBOTG_VBASE+LPC31_USBHOST_FRINDEX_OFFSET)
#define LPC31_USBHOST_PERIODICLIST (LPC31_USBOTG_VBASE+LPC31_USBHOST_PERIODICLIST_OFFSET)
#define LPC31_USBHOST_ASYNCLISTADDR (LPC31_USBOTG_VBASE+LPC31_USBHOST_ASYNCLISTADDR_OFFSET)
#define LPC31_USBHOST_TTCTRL (LPC31_USBOTG_VBASE+LPC31_USBHOST_TTCTRL_OFFSET)
#define LPC31_USBHOST_BURSTSIZE (LPC31_USBOTG_VBASE+LPC31_USBHOST_BURSTSIZE_OFFSET)
#define LPC31_USBHOST_TXFILLTUNING (LPC31_USBOTG_VBASE+LPC31_USBHOST_TXFILLTUNING_OFFSET)
#define LPC31_USBHOST_BINTERVAL (LPC31_USBOTG_VBASE+LPC31_USBHOST_BINTERVAL_OFFSET)
#define LPC31_USBHOST_PORTSC1 (LPC31_USBOTG_VBASE+LPC31_USBHOST_PORTSC1_OFFSET)
#define LPC31_USBHOST_USBMODE (LPC31_USBOTG_VBASE+LPC31_USBHOST_USBMODE_OFFSET)
/* Device endpoint registers */
#define LPC31_USBDEV_ENDPTSETUPSTAT (LPC31_USBOTG_VBASE+LPC31_USBDEV_ENDPTSETUPSTAT_OFFSET)
#define LPC31_USBDEV_ENDPTPRIME (LPC31_USBOTG_VBASE+LPC31_USBDEV_ENDPTPRIME_OFFSET)
#define LPC31_USBDEV_ENDPTFLUSH (LPC31_USBOTG_VBASE+LPC31_USBDEV_ENDPTFLUSH_OFFSET)
#define LPC31_USBDEV_ENDPTSTATUS (LPC31_USBOTG_VBASE+LPC31_USBDEV_ENDPTSTATUS_OFFSET)
#define LPC31_USBDEV_ENDPTCOMPLETE (LPC31_USBOTG_VBASE+LPC31_USBDEV_ENDPTCOMPLETE_OFFSET)
#define LPC31_USBDEV_ENDPTCTRL0 (LPC31_USBOTG_VBASE+LPC31_USBDEV_ENDPTCTRL0_OFFSET)
#define LPC31_USBDEV_ENDPTCTRL1 (LPC31_USBOTG_VBASE+LPC31_USBDEV_ENDPTCTRL1_OFFSET)
#define LPC31_USBDEV_ENDPTCTRL2 (LPC31_USBOTG_VBASE+LPC31_USBDEV_ENDPTCTRL2_OFFSET)
#define LPC31_USBDEV_ENDPTCTRL3 (LPC31_USBOTG_VBASE+LPC31_USBDEV_ENDPTCTRL3_OFFSET)
/* USBOTG register bit definitions **************************************************************/
/* Device/host capability registers */
/* CAPLENGTH (address 0x19000100) */
#define USBOTG_CAPLENGTH_SHIFT (0) /* Bits 0-7: Offset from register base to operational regs */
#define USBOTG_CAPLENGTH_MASK (0xff << USBOTG_CAPLENGTH_SHIFT)
/* HCIVERSION (address 0x19000102) */
#define USBHOST_HCIVERSION_SHIFT (0) /* Bits 0-15: BCD encoding of the EHCI revision number */
#define USBHOST_HCIVERSION_MASK (0xffff << USBHOST_HCIVERSION_SHIFT)
/* HCSPARAMS (address 0x19000104) */
#define USBHOST_HCSPARAMS_NTT_SHIFT (24) /* Bits 24-27: Number of Transaction Translators */
#define USBHOST_HCSPARAMS_NTT_MASK (15 << USBHOST_HCSPARAMS_NTT_SHIFT)
#define USBHOST_HCSPARAMS_NPTT_SHIFT (20) /* Bits 20-23: Number of Ports per Transaction Translator */
#define USBHOST_HCSPARAMS_NPTT_MASK (15 << USBHOST_HCSPARAMS_NPTT_SHIFT)
#define USBHOST_HCSPARAMS_PI (1 >> 16) /* Bit 16: Port indicators */
#define USBHOST_HCSPARAMS_NCC_SHIFT (15) /* Bits 12-15: Number of Companion Controller */
#define USBHOST_HCSPARAMS_NCC_MASK (15 << USBHOST_HCSPARAMS_NCC_SHIFT)
#define USBHOST_HCSPARAMS_NPCC_SHIFT (8) /* Bits 8-11: Number of Ports per Companion Controller */
#define USBHOST_HCSPARAMS_NPCC_MASK (15 << USBHOST_HCSPARAMS_NPCC_SHIFT)
#define USBHOST_HCSPARAMS_PPC (1 >> 4) /* Bit 4: Port Power Control */
#define USBHOST_HCSPARAMS_NPORTS_SHIF (0) /* Bits 0-3: Number of downstream ports */
#define USBHOST_HCSPARAMS_NPORTS_MASK (15 << USBHOST_HCSPARAMS_NPORTS_SHIFT)
/* HCCPARAMS (address 0x19000108) */
#define USBHOST_HCCPARAMS_EECP_SHIFT (8) /* Bits 8-15: EHCI Extended Capabilities Pointer */
#define USBHOST_HCCPARAMS_EECP_MASK (255 << USBHOST_HCCPARAMS_EECP_SHIFT)
#define USBHOST_HCCPARAMS_IST_SHIFT (4) /* Bits 4-7: Isochronous Scheduling Threshold */
#define USBHOST_HCCPARAMS_IST_MASK (15 << USBHOST_HCCPARAMS_IST_SHIFT)
#define USBHOST_HCCPARAMS_ASP (1 >> 2) /* Bit 2: Asynchronous Schedule Park Capability */
#define USBHOST_HCCPARAMS_PFL (1 >> 1) /* Bit 1: Programmable Frame List Flag */
#define USBHOST_HCCPARAMS_ADC (1 >> 0) /* Bit 0: 64-bit Addressing Capability */
/* DCIVERSION (address 0x19000120) */
#define USBDEV_DCIVERSION_SHIFT (0) /* Bits 0-15: BCD encoding of the device interface */
#define USBDEV_DCIVERSION_MASK (0xffff << USBDEV_DCIVERSION_SHIFT)
/* DCCPARAMS (address 0x19000124) */
#define USBDEV_DCCPARAMS_HC (1 >> 8) /* Bit 8: Host Capable */
#define USBDEV_DCCPARAMS_DC (1 >> 7) /* Bit 7: Device Capable */
#define USBDEV_DCCPARAMS_DEN_SHIFT (0) /* Bits 0-4: DEN Device Endpoint Number */
#define USBDEV_DCCPARAMS_DEN_MASK (31 << USBDEV_DCCPARAMS_DEN_SHIFT)
/* Device/host operational registers */
/* USB Command register USBCMD (address 0x19000140) -- Device Mode */
#define USBDEV_USBCMD_ITC_SHIFT (16) /* Bits 16-23: Interrupt threshold control */
#define USBDEV_USBCMD_ITC_MASK (255 << USBDEV_USBCMD_ITC_SHIFT)
# define USBDEV_USBCMD_ITCIMME (0 << USBDEV_USBCMD_ITC_SHIFT) /* Immediate (no threshold) */
# define USBDEV_USBCMD_ITC1UF (1 << USBDEV_USBCMD_ITC_SHIFT) /* 1 micro frame */
# define USBDEV_USBCMD_ITC2UF (2 << USBDEV_USBCMD_ITC_SHIFT) /* 2 micro frames */
# define USBDEV_USBCMD_ITC4UF (4 << USBDEV_USBCMD_ITC_SHIFT) /* 4 micro frames */
# define USBDEV_USBCMD_ITC8UF (8 << USBDEV_USBCMD_ITC_SHIFT) /* 8 micro frames */
# define USBDEV_USBCMD_ITC16UF (16 << USBDEV_USBCMD_ITC_SHIFT) /* 16 micro frames */
# define USBDEV_USBCMD_ITC32UF (32 << USBDEV_USBCMD_ITC_SHIFT) /* 32 micro frames */
# define USBDEV_USBCMD_ITC64UF (64 << USBDEV_USBCMD_ITC_SHIFT) /* 64 micro frames */
#define USBDEV_USBCMD_ATDTW (1 << 14) /* Bit 14: Add dTD trip wire */
#define USBDEV_USBCMD_SUTW (1 << 13) /* Bit 13: Setup trip wire */
#define USBDEV_USBCMD_RST (1 << 1) /* Bit 1: 1 Controller reset */
#define USBDEV_USBCMD_RS (1 << 0) /* Bit 0: 0 Run/Stop */
/* USB Command register USBCMD (address 0x19000140) -- Host Mode */
#define USBHOST_USBCMD_ITC_SHIFT (16) /* Bits 16-13: Interrupt threshold control */
#define USBHOST_USBCMD_ITC_MASK (255 << USBHOST_USBCMD_ITC_SHIFT)
# define USBHOST_USBCMD_ITCIMMED (0 << USBHOST_USBCMD_ITC_SHIFT) /* Immediate (no threshold) */
# define USBHOST_USBCMD_ITC1UF (1 << USBHOST_USBCMD_ITC_SHIFT) /* 1 micro frame */
# define USBHOST_USBCMD_ITC2UF (2 << USBHOST_USBCMD_ITC_SHIFT) /* 2 micro frames */
# define USBHOST_USBCMD_ITC4UF (4 << USBHOST_USBCMD_ITC_SHIFT) /* 4 micro frames */
# define USBHOST_USBCMD_ITC8UF (8 << USBHOST_USBCMD_ITC_SHIFT) /* 8 micro frames */
# define USBHOST_USBCMD_ITC16UF (16 << USBHOST_USBCMD_ITC_SHIFT) /* 16 micro frames */
# define USBHOST_USBCMD_ITC32UF (32 << USBHOST_USBCMD_ITC_SHIFT) /* 32 micro frames */
# define USBHOST_USBCMD_ITC64UF (64 << USBHOST_USBCMD_ITC_SHIFT) /* 64 micro frames */
#define USBHOST_USBCMD_FS2 (1 << 15) /* Bit 15: Bit 2 of the Frame List Size bits */
#define USBHOST_USBCMD_ASPE (1 << 11) /* Bit 11: Asynchronous Schedule Park Mode Enable */
#define USBHOST_USBCMD_ASP_SHIFT (8) /* Bits 8-9: Asynchronous schedule park mode */
#define USBHOST_USBCMD_ASP_MASK (3 << USBHOST_USBCMD_ASP_SHIFT)
#define USBHOST_USBCMD_IAA (1 << 6) /* Bit 6: Interrupt next asynchronous schedule */
#define USBHOST_USBCMD_ASE (1 << 5) /* Bit 5: Skips processing asynchronous schedule */
#define USBHOST_USBCMD_PSE (1 << 4) /* Bit 4: Skips processing periodic schedule */
#define USBHOST_USBCMD_FS1 (1 << 3) /* Bit 3: Bit 1 of the Frame List Size bits */
#define USBHOST_USBCMD_FS0 (1 << 2) /* Bit 2: Bit 0 of the Frame List Size bits */
#define USBHOST_USBCMD_RST (1 << 1) /* Bit 1: Controller reset */
#define USBHOST_USBCMD_RS (1 << 0) /* Bit 0: Run/Stop */
/* USB Status register USBSTS (address 0x19000144) -- Device Mode */
#define USBDEV_USBSTS_NAKI (1 << 16) /* Bit 16: NAK interrupt bit */
#define USBDEV_USBSTS_SLI (1 << 8) /* Bit 8: DCSuspend */
#define USBDEV_USBSTS_SRI (1 << 7) /* Bit 7: SOF received */
#define USBDEV_USBSTS_URI (1 << 6) /* Bit 6: USB reset received */
#define USBDEV_USBSTS_PCI (1 << 2) /* Bit 2: Port change detect */
#define USBDEV_USBSTS_UEI (1 << 1) /* Bit 1: USB error interrupt */
#define USBDEV_USBSTS_UI (1 << 0) /* Bit 0: USB interrupt */
/* USB Status register USBSTS (address 0x19000144) -- Host Mode */
#define USBHOST_USBSTS_UPI (1 << 19) /* Bit 19: USB host periodic interrupt */
#define USBHOST_USBSTS_UAI (1 << 18) /* Bit 18: USB host asynchronous interrupt */
#define USBHOST_USBSTS_AS (1 << 15) /* Bit 15: Asynchronous schedule status */
#define USBHOST_USBSTS_PS (1 << 14) /* Bit 14: Periodic schedule status */
#define USBHOST_USBSTS_RCL (1 << 13) /* Bit 13: Reclamation */
#define USBHOST_USBSTS_HCH (1 << 12) /* Bit 12: HCHalted */
#define USBHOST_USBSTS_SRI (1 << 7) /* Bit 7: SOF received */
#define USBHOST_USBSTS_AAI (1 << 5) /* Bit 5: Interrupt on async advance */
#define USBHOST_USBSTS_FRI (1 << 3) /* Bit 3: Frame list roll-over */
#define USBHOST_USBSTS_PCI (1 << 2) /* Bit 2: Port change detect */
#define USBHOST_USBSTS_UEI (1 << 1) /* Bit 1: USB error interrupt */
#define USBHOST_USBSTS_UI (1 << 0) /* Bit 0: USB interrupt */
/* USB interrupt register USBINTR (address 0x19000148) -- Device Mode */
#define USBDEV_USBINTR_NAKE (1 << 16) /* Bit 16: NAK interrupt enable */
#define USBDEV_USBINTR_SLE (1 << 8) /* Bit 8: Sleep enable */
#define USBDEV_USBINTR_SRE (1 << 7) /* Bit 7: SOF received enable */
#define USBDEV_USBINTR_URE (1 << 6) /* Bit 6: USB reset enable */
#define USBDEV_USBINTR_PCE (1 << 2) /* Bit 2: Port change detect enable */
#define USBDEV_USBINTR_UEE (1 << 1) /* Bit 1: USB error interrupt enable */
#define USBDEV_USBINTR_UE (1 << 0) /* Bit 0: USB interrupt enable */
/* USB interrupt register USBINTR (address 0x19000148) -- Host Mode */
#define USBHOST_USBINTR_UPIA (1 << 19) /* Bit 19: USB host periodic interrupt enable */
#define USBHOST_USBINTR_UAIE (1 << 18) /* Bit 18: USB host asynchronous interrupt enable */
#define USBHOST_USBINTR_SRE (1 << 7) /* Bit 7: SOF timer interrupt enable */
#define USBHOST_USBINTR_AAE (1 << 5) /* Bit 5: Interrupt on asynchronous advance enable */
#define USBHOST_USBINTR_FRE (1 << 3) /* Bit 3: Frame list rollover enable */
#define USBHOST_USBINTR_PCE (1 << 2) /* Bit 2: Port change detect enable */
#define USBHOST_USBINTR_UEE (1 << 1) /* Bit 1: USB error interrupt enable */
#define USBHOST_USBINTR_UE (1 << 0) /* Bit 0: USB interrupt enable */
/* Frame index register FRINDEX (address 0x1900014c) -- Device Mode */
#define USBDEV_FRINDEX_LFN_SHIFT (3) /* Bits 3-13: Frame number of last frame transmitted */
#define USBDEV_FRINDEX_LFN_MASK (0x7ff << USBDEV_FRINDEX_LFN_SHIFT)
#define USBDEV_FRINDEX_CUFN_SHIFT (0) /* Bits 0-2: Current micro frame number */
#define USBDEV_FRINDEX_CUFN_MASK (7 << USBDEV_FRINDEX_CUFN_SHIFT)
/* Frame index register FRINDEX (address 0x1900014c) -- Host Mode */
#define USBHOST_FRINDEX_FLI_SHIFT (3) /* Bits 3-13: Frame list current index */
#define USBHOST_FRINDEX_FLI_MASK(n) (0x7ff << ((n)+USBHOST_FRINDEX_FLI_SHIFT-1)
#define USBHOST_FRINDEX_CUFN_SHIFT (0) /* Bits 0-2: Current micro frame number */
#define USBHOST_FRINDEX_CUFN_MASK (7 << USBHOST_FRINDEX_CUFN_SHIFT)
/* USB Device Address register DEVICEADDR (address 0x19000154) -- Device Mode */
#define USBDEV_DEVICEADDR_SHIFT (25) /* Bits 25-31: USBADR USB device address */
#define USBDEV_DEVICEADDR_MASK (0x3c << USBDEV_DEVICEADDR_SHIFT)
#define USBDEV_DEVICEADDR_USBADRA (1 << 24) /* Bit 24: Device address advance */
/* USB Periodic List Base register PERIODICLIST (address 0x19000154) -- Host Mode */
#define USBHOST_PERIODICLIST_PERBASE_SHIFT (12) /* Bits 12-31: Base Address (Low) */
#define USBHOST_PERIODICLIST_PERBASE_MASK (0x000fffff << USBHOST_PERIODICLIST_PERBASE_SHIFT)
/* USB Endpoint List Address register ENDPOINTLISTADDR (address 0x19000158) -- Device Mode */
#define USBDEV_ENDPOINTLIST_EPBASE_SHIFT (11) /* Bits 11-31: Endpoint list pointer (low) */
#define USBDEV_ENDPOINTLIST_EPBASE_MASK (0x001fffff << USBDEV_ENDPOINTLIST_EPBASE_SHIFT)
/* USB Asynchronous List Address register ASYNCLISTADDR- (address 0x19000158) -- Host Mode */
#define USBHOST_ASYNCLISTADDR_ASYBASE_SHIFT (5) /* Bits 5-31: Link pointer (Low) LPL */
#define USBHOST_ASYNCLISTADDR_ASYBASE_MASK (0x07ffffff << USBHOST_ASYNCLISTADDR_ASYBASE_SHIFT)
/* USB TT Control register TTCTRL (address 0x1900015c) -- Host Mode */
#define USBHOST_TTCTRL_TTHA_SHIFT (24) /* Bits 24-30: Hub address */
#define USBHOST_TTCTRL_TTHA_MASK (0x7f << USBHOST_TTCTRL_TTHA_SHIFT)
/* USB burst size register BURSTSIZE (address 0x19000160) -- Device/Host Mode */
#define USBDEV_BURSTSIZE_TXPBURST_SHIFT (8) /* Bits 8-15: Programmable TX burst length */
#define USBDEV_BURSTSIZE_TXPBURST_MASK (255 << USBDEV_BURSTSIZE_TXPBURST_SHIFT)
#define USBDEV_BURSTSIZE_RXPBURST_SHIFT (0) /* Bits 0-7: RXPBURST Programmable RX burst length */
#define USBDEV_BURSTSIZE_RXPBURST_MASK (255 << USBDEV_BURSTSIZE_RXPBURST_SHIFT)
#define USBHOST_BURSTSIZE_TXPBURST_SHIFT (8) /* Bits 8-15: Programmable TX burst length */
#define USBHOST_BURSTSIZE_TXPBURST_MASK (255 << USBHOST_BURSTSIZE_TXPBURST_SHIFT)
#define USBHOST_BURSTSIZE_RXPBURST_SHIFT (0) /* Bits 0-7: RXPBURST Programmable RX burst length */
#define USBHOST_BURSTSIZE_RXPBURST_MASK (255 << USBHOST_BURSTSIZE_RXPBURST_SHIFT)
/* USB Transfer buffer Fill Tuning register TXFIFOFILLTUNING (address 0x19000164) -- Host Mode */
#define USBHOST_TXFILLTUNING_FIFOTHRES_SHIFT (16) /* Bits 16-21: Scheduler overhead */
#define USBHOST_TXFILLTUNING_FIFOTHRES_MASK (0x3c << USBHOST_TXFILLTUNING_FIFOTHRES_SHIFT)
#define USBHOST_TXFILLTUNING_SCHEATLTH_SHIFT (8) /* Bits 8-12: Scheduler health counter */
#define USBHOST_TXFILLTUNING_SCHEATLTH_MASK (0x1f << USBHOST_TXFILLTUNING_SCHEATLTH_SHIFT)
#define USBHOST_TXFILLTUNING_SCHOH_SHIFT (0) /* Bits 0-7: FIFO burst threshold */
#define USBHOST_TXFILLTUNING_SCHOH_MASK (0xff << USBHOST_TXFILLTUNING_SCHOH_SHIFT)
/* USB BINTERVAL register BINTERVAL (address 0x19000174) -- Device/Host Mode */
#define USBDEV_BINTERVAL_SHIFT (0) /* Bits 0-3: bInterval value */
#define USBDEV_BINTERVAL_MASK (15 << USBDEV_BINTERVAL_SHIFT)
#define USBHOST_BINTERVAL_SHIFT (0) /* Bits 0-3: bInterval value */
#define USBHOST_BINTERVAL_MASK (15 << USBHOST_BINTERVAL_SHIFT)
/* USB endpoint NAK register ENDPTNAK (address 0x19000178) -- Device Mode */
#define USBDEV_ENDPTNAK_EPTN_SHIFT (16) /* Bits 16-19: Tx endpoint NAK */
#define USBDEV_ENDPTNAK_EPTN_MASK (15 << USBDEV_ENDPTNAK_EPTN_SHIFT)
#define USBDEV_ENDPTNAK_EPRN_SHIFT (0) /* Bits 0-3: Rx endpoint NAK */
#define USBDEV_ENDPTNAK_EPRN_MASK (15 << USBDEV_ENDPTNAK_EPRN_SHIFT)
/* USB Endpoint NAK Enable register ENDPTNAKEN (address 0x1900017c) -- Device Mode */
#define USBDEV_ENDPTNAK_EPTNE_SHIFT (16) /* Bits 16-19: Tx endpoint NAK enable */
#define USBDEV_ENDPTNAK_EPTNE_MASK (15 << USBDEV_ENDPTNAK_EPTNE_SHIFT)
#define USBDEV_ENDPTNAK_EPRNE_SHIFT (0) /* Bits 0-3: Rx endpoint NAK enable */
#define USBDEV_ENDPTNAK_EPRNE_MASK (15 << USBDEV_ENDPTNAK_EPRNE_SHIFT)
/* Port Status and Control register PRTSC1 (address 0x19000184) -- Device Mode */
#define USBDEV_PRTSC1_PSPD_SHIFT (26) /* Bits 26-27: Port speed */
#define USBDEV_PRTSC1_PSPD_MASK (3 << USBDEV_PRTSC1_PSPD_SHIFT)
# define USBDEV_PRTSC1_PSPD_FS (0 << USBDEV_PRTSC1_PSPD_SHIFT) /* Full-speed */
# define USBDEV_PRTSC1_PSPD_LS (1 << USBDEV_PRTSC1_PSPD_SHIFT) /* Low-speed */
# define USBDEV_PRTSC1_PSPD_HS (2 << USBDEV_PRTSC1_PSPD_SHIFT) /* High-speed */
#define USBDEV_PRTSC1_PFSC (1 << 24) /* Bit 24: Port force full speed connect */
#define USBDEV_PRTSC1_PHCD (1 << 23) /* Bit 23: PHY low power suspend - clock disable (PLPSCD) */
#define USBDEV_PRTSC1_PTC_SHIFT (16) /* Bits 16-19: 19: Port test control */
#define USBDEV_PRTSC1_PTC_MASK (15 << USBDEV_PRTSC1_PTC_SHIFT)
# define USBDEV_PRTSC1_PTC_DISABLE (0 << USBDEV_PRTSC1_PTC_SHIFT) /* TEST_MODE_DISABLE */
# define USBDEV_PRTSC1_PTC_JSTATE (1 << USBDEV_PRTSC1_PTC_SHIFT) /* J_STATE */
# define USBDEV_PRTSC1_PTC_KSTATE (2 << USBDEV_PRTSC1_PTC_SHIFT) /* K_STATE */
# define USBDEV_PRTSC1_PTC_SE0 (3 << USBDEV_PRTSC1_PTC_SHIFT) /* SE0 (host)/NAK (device) */
# define USBDEV_PRTSC1_PTC_PACKET (4 << USBDEV_PRTSC1_PTC_SHIFT) /* Packet */
# define USBDEV_PRTSC1_PTC_HS (5 << USBDEV_PRTSC1_PTC_SHIFT) /* FORCE_ENABLE_HS */
# define USBDEV_PRTSC1_PTC_FS (6 << USBDEV_PRTSC1_PTC_SHIFT) /* FORCE_ENABLE_FS */
#define USBDEV_PRTSC1_PIC_SHIFT (14) /* Bits 14-15: Port indicator control */
#define USBDEV_PRTSC1_PIC_MASK (3 << USBDEV_PRTSC1_PIC_SHIFT)
# define USBDEV_PRTSC1_PIC_OFF (0 << USBDEV_PRTSC1_PIC_SHIFT) /* 00 Port indicators are off */
# define USBDEV_PRTSC1_PIC_AMBER (1 << USBDEV_PRTSC1_PIC_SHIFT) /* 01 amber */
# define USBDEV_PRTSC1_PIC_GREEN (2 << USBDEV_PRTSC1_PIC_SHIFT) /* 10 green */
#define USBDEV_PRTSC1_HSP (1 << 9) /* Bit 9: High-speed status */
#define USBDEV_PRTSC1_PR (1 << 8) /* Bit 8: Port reset */
#define USBDEV_PRTSC1_SUSP (1 << 7) /* Bit 7: Suspend */
#define USBDEV_PRTSC1_FPR (1 << 6) /* Bit 6: Force port resume */
#define USBDEV_PRTSC1_PEC (1 << 3) /* Bit 3: Port enable/disable change */
#define USBDEV_PRTSC1_PE (1 << 2) /* Bit 2: Port enable */
#define USBDEV_PRTSC1_CCS (1 << 0) /* Bit 0: Current connect status */
/* Port Status and Control register PRTSC1 (address 0x19000184) -- Host Mode */
#define USBHOST_PRTSC1_PSPD_SHIFT (26) /* Bits 26-27: Port speed */
#define USBHOST_PRTSC1_PSPD_MASK (3 << USBHOST_PRTSC1_PSPD_SHIFT)
# define USBHOST_PRTSC1_PSPD_FS (0 << USBHOST_PRTSC1_PSPD_SHIFT) /* Full-speed */
# define USBHOST_PRTSC1_PSPD_LS (1 << USBHOST_PRTSC1_PSPD_SHIFT) /* Low-speed */
# define USBHOST_PRTSC1_PSPD_HS (2 << USBHOST_PRTSC1_PSPD_SHIFT) /* High-speed */
#define USBHOST_PRTSC1_PFSC (1 << 24) /* Bit 24: Port force full speed connect */
#define USBHOST_PRTSC1_PHCD (1 << 23) /* Bit 23: PHY low power suspend - clock disable (PLPSCD) */
#define USBHOST_PRTSC1_WKOC (1 << 22) /* Bit 22: Wake on over-current enable (WKOC_E) */
#define USBHOST_PRTSC1_WKDC (1 << 21) /* Bit 21: Wake on disconnect enable (WKDSCNNT_E) */
#define USBHOST_PRTSC1_WKCN (1 << 20) /* Bit 20: Wake on connect enable (WKCNNT_E) */
#define USBHOST_PRTSC1_PTC_SHIFT (16) /* Bits 16-19: Port test control */
#define USBHOST_PRTSC1_PTC_MASK (15 << USBHOST_PRTSC1_PTC_SHIFT)
# define USBHOST_PRTSC1_PTC_DISABLE (0 << USBHOST_PRTSC1_PTC_SHIFT) /* 0000 TEST_MODE_DISABLE */
# define USBHOST_PRTSC1_PTC_JSTATE (1 << USBHOST_PRTSC1_PTC_SHIFT) /* 0001 J_STATE */
# define USBHOST_PRTSC1_PTC_KSTATE (2 << USBHOST_PRTSC1_PTC_SHIFT) /* 0010 K_STATE */
# define USBHOST_PRTSC1_PTC_SE0 (3 << USBHOST_PRTSC1_PTC_SHIFT) /* 0011 SE0 (host)/NAK (device) */
# define USBHOST_PRTSC1_PTC_PACKET (4 << USBHOST_PRTSC1_PTC_SHIFT) /* 0100 Packet */
# define USBHOST_PRTSC1_PTC_HS (5 << USBHOST_PRTSC1_PTC_SHIFT) /* 0101 FORCE_ENABLE_HS */
# define USBHOST_PRTSC1_PTC_FS (6 << USBHOST_PRTSC1_PTC_SHIFT) /* 0110 FORCE_ENABLE_FS */
# define USBHOST_PRTSC1_PTC_LS (7 << USBHOST_PRTSC1_PTC_SHIFT) /* 0111 FORCE_ENABLE_LS */
#define USBHOST_PRTSC1_PIC_SHIFT (14) /* Bits 14-15: Port indicator control */
#define USBHOST_PRTSC1_PIC_MASK (3 << USBHOST_PRTSC1_PIC_SHIFT)
# define USBHOST_PRTSC1_PIC_OFF (0 << USBHOST_PRTSC1_PIC_SHIFT) /* 00 Port indicators are off */
# define USBHOST_PRTSC1_PIC_AMBER (1 << USBHOST_PRTSC1_PIC_SHIFT) /* 01 Amber */
# define USBHOST_PRTSC1_PIC_GREEN (2 << USBHOST_PRTSC1_PIC_SHIFT) /* 10 Green */
#define USBHOST_PRTSC1_PP (1 << 12) /* Bit 12: Port power control */
#define USBHOST_PRTSC1_LS_SHIFT (10) /* Bits 10-11: Line status */
#define USBHOST_PRTSC1_LS_MASK (3 << USBHOST_PRTSC1_LS_SHIFT)
# define USBHOST_PRTSC1_LS_SE0 (0 << USBHOST_PRTSC1_LS_SHIFT) /* SE0 (USB_DP and USB_DM LOW) */
# define USBHOST_PRTSC1_LS_JSTATE (2 << USBHOST_PRTSC1_LS_SHIFT) /* J-state (USB_DP HIGH and USB_DM LOW) */
# define USBHOST_PRTSC1_LS_KSTATE (1 << USBHOST_PRTSC1_LS_SHIFT) /* K-state (USB_DP LOW and USB_DM HIGH) */
#define USBHOST_PRTSC1_HSP (1 << 9) /* Bit 9: High-speed status */
#define USBHOST_PRTSC1_PR (1 << 8) /* Bit 8: Port reset */
#define USBHOST_PRTSC1_SUSP (1 << 7) /* Bit 7: Suspend */
#define USBHOST_PRTSC1_FPR (1 << 6) /* Bit 6: Force port resume */
#define USBHOST_PRTSC1_OCC (1 << 5) /* Bit 5: Over-current change */
#define USBHOST_PRTSC1_OCA (1 << 4) /* Bit 4: Over-current active */
#define USBHOST_PRTSC1_PEC (1 << 3) /* Bit 3: Port disable/enable change */
#define USBHOST_PRTSC1_PE (1 << 2) /* Bit 2: Port enable */
#define USBHOST_PRTSC1_CSC (1 << 1) /* Bit 1: Connect status change */
#define USBHOST_PRTSC1_CCS (1 << 0) /* Bit 0: Current connect status */
/* OTG Status and Control register (OTGSC - address 0x190001a4) */
/* OTG interrupt enable */
#define USBOTG_OTGSC_DPIE (1 << 30) /* Bit 30: Data pulse interrupt enable */
#define USBOTG_OTGSC_1MSE (1 << 29) /* Bit 29: 1 millisecond timer interrupt enable */
#define USBOTG_OTGSC_BSEIE (1 << 28) /* Bit 28: B-session end interrupt enable */
#define USBOTG_OTGSC_BSVIE (1 << 27) /* Bit 27: B-session valid interrupt enable */
#define USBOTG_OTGSC_ASVIE (1 << 26) /* Bit 26: A-session valid interrupt enable */
#define USBOTG_OTGSC_AVVIE (1 << 25) /* Bit 25: A-VBUS valid interrupt enable */
#define USBOTG_OTGSC_IDIE (1 << 24) /* Bit 24: USB ID interrupt enable */
/* OTG interrupt status */
#define USBOTG_OTGSC_DPIS (1 << 22) /* Bit 22: Data pulse interrupt status */
#define USBOTG_OTGSC_1MSS (1 << 21) /* Bit 21: 1 millisecond timer interrupt status */
#define USBOTG_OTGSC_BSEIS (1 << 20) /* Bit 20: B-Session end interrupt status */
#define USBOTG_OTGSC_BSVIS (1 << 19) /* Bit 19: B-Session valid interrupt status */
#define USBOTG_OTGSC_ASVIS (1 << 18) /* Bit 18: A-Session valid interrupt status */
#define USBOTG_OTGSC_AVVIS (1 << 17) /* Bit 17: A-VBUS valid interrupt status */
#define USBOTG_OTGSC_IDIS (1 << 16) /* Bit 16: USB ID interrupt status */
/* OTG status inputs */
#define USBOTG_OTGSC_DPS (1 << 14) /* Bit 14: Data bus pulsing status */
#define USBOTG_OTGSC_1MST (1 << 13) /* Bit 13: 1 millisecond timer toggle */
#define USBOTG_OTGSC_BSE (1 << 12) /* Bit 12: B-session end */
#define USBOTG_OTGSC_BSV (1 << 11) /* Bit 11: B-session valid */
#define USBOTG_OTGSC_ASV (1 << 10) /* Bit 10: A-session valid */
#define USBOTG_OTGSC_AVV (1 << 9) /* Bit 9: A-VBUS valid */
#define USBOTG_OTGSC_ID (1 << 8) /* Bit 8: USB ID */
/* OTG controls */
#define USBOTG_OTGSC_HABA (1 << 7) /* Bit 7: Hardware assist B-disconnect to A-connect */
#define USBOTG_OTGSC_HADP (1 << 6) /* Bit 6: Hardware assist data pulse */
#define USBOTG_OTGSC_IDPU (1 << 5) /* Bit 5: ID pull-up */
#define USBOTG_OTGSC_DP (1 << 4) /* Bit 4: Data pulsing */
#define USBOTG_OTGSC_OT (1 << 3) /* Bit 3: OTG termination */
#define USBOTG_OTGSC_HAAR (1 << 2) /* Bit 2: Hardware assist auto_reset */
#define USBOTG_OTGSC_VC (1 << 1) /* Bit 1: VBUS_Charge */
#define USBOTG_OTGSC_VD (1 << 0) /* Bit 0: VBUS_Discharge */
/* USB Mode register USBMODE (address 0x190001a8) -- Device Mode */
#define USBDEV_USBMODE_SDIS (1 << 4) /* Bit 4: Stream disable mode */
#define USBDEV_USBMODE_SLOM (1 << 3) /* Bit 3: Setup Lockout mode */
#define USBDEV_USBMODE_ES (1 << 2) /* Bit 2: Endian select */
#define USBDEV_USBMODE_CM_SHIFT (0) /* Bits 0-1: Controller mode */
#define USBDEV_USBMODE_CM_MASK (3 << USBDEV_USBMODE_CM_SHIFT)
# define USBDEV_USBMODE_CMIDLE (0 << USBDEV_USBMODE_CM_SHIFT) /* Idle */
# define USBDEV_USBMODE_CMDEVICE (2 << USBDEV_USBMODE_CM_SHIFT) /* Device controller */
# define USBDEV_USBMODE_CMHOST (3 << USBDEV_USBMODE_CM_SHIFT) /* Host controller */
/* USB Mode register USBMODE (address 0x190001a8) -- Device Mode */
#define USBHOST_USBMODE_VBPS (1 << 5) /* Bit 5: VBUS power select */
#define USBHOST_USBMODE_SDIS (1 << 4) /* Bit 4: Stream disable mode */
#define USBHOST_USBMODE_ES (1 << 2) /* Bit 2: Endian select */
#define USBHOST_USBMODE_CM_SHIFT (0) /* Bits 0-1: Controller mode */
#define USBHOST_USBMODE_CM_MASK (3 << USBHOST_USBMODE_CM_SHIFT)
# define USBHOST_USBMODE_CMIDLE (0 << USBHOST_USBMODE_CM_SHIFT) /* Idle */
# define USBHOST_USBMODE_CMDEVICE (2 << USBHOST_USBMODE_CM_SHIFT) /* Device controller */
# define USBHOST_USBMODE_CMHOST (3 << USBHOST_USBMODE_CM_SHIFT) /* Host controller */
/* Device endpoint registers */
/* USB Endpoint Setup Status register ENDPTSETUPSTAT (address 0x190001ac) */
#define USBDEV_ENDPTSETSTAT_STAT3 (1 << 3) /* Bit 3: Setup EP status for logical EP 3 */
#define USBDEV_ENDPTSETSTAT_STAT2 (1 << 2) /* Bit 2: Setup EP status for logical EP 2 */
#define USBDEV_ENDPTSETSTAT_STAT1 (1 << 1) /* Bit 1: Setup EP status for logical EP 1 */
#define USBDEV_ENDPTSETSTAT_STAT0 (1 << 0) /* Bit 0: Setup EP status for logical EP 0 */
/* USB Endpoint Prime register ENDPTPRIME (address 0x190001b0) */
#define USBDEV_ENDPTPRIM_PETB3 (1 << 19) /* Bit 19: Prime EP xmt buffer for physical IN EP 3 */
#define USBDEV_ENDPTPRIM_PETB2 (1 << 18) /* Bit 18: Prime EP xmt buffer for physical IN EP 2 */
#define USBDEV_ENDPTPRIM_PETB1 (1 << 17) /* Bit 17: Prime EP xmt buffer for physical IN EP 1 */
#define USBDEV_ENDPTPRIM_PETB0 (1 << 16) /* Bit 16: Prime EP xmt buffer for physical IN EP 0 */
#define USBDEV_ENDPTPRIM_PERB3 (1 << 3) /* Bit 3: Prime EP recv buffer for physical OUT EP 3 */
#define USBDEV_ENDPTPRIM_PERB2 (1 << 2) /* Bit 2: Prime EP recv buffer for physical OUT EP 2 */
#define USBDEV_ENDPTPRIM_PERB1 (1 << 1) /* Bit 1: Prime EP recv buffer for physical OUT EP 1 */
#define USBDEV_ENDPTPRIM_PERB0 (1 << 0) /* Bit 0: Prime EP recv buffer for physical OUT EP 0 */
/* USB Endpoint Flush register ENDPTFLUSH(address 0x190001b4) */
#define USBDEV_ENDPTFLUSH_FETB3 (1 << 19) /* Bit 19: Flush EP xmt buffer for physical IN EP 3 */
#define USBDEV_ENDPTFLUSH_FETB2 (1 << 18) /* Bit 18: Flush EP xmt buffer for physical IN EP 2 */
#define USBDEV_ENDPTFLUSH_FETB1 (1 << 17) /* Bit 17: Flush EP xmt buffer for physical IN EP 1 */
#define USBDEV_ENDPTFLUSH_FETB0 (1 << 16) /* Bit 16: Flush EP xmt buffer for physical IN EP 0 */
#define USBDEV_ENDPTFLUSH_FERB3 (1 << 3) /* Bit 3: Flush EP recv buffer for physical OUT EP 3 */
#define USBDEV_ENDPTFLUSH_FERB2 (1 << 2) /* Bit 2: Flush EP recv buffer for physical OUT EP 2 */
#define USBDEV_ENDPTFLUSH_FERB1 (1 << 1) /* Bit 1: Flush EP recv buffer for physical OUT EP 1 */
#define USBDEV_ENDPTFLUSH_FERB0 (1 << 0) /* Bit 0: Flush EP recv buffer for physical OUT EP 0 */
/* USB Endpoint Status register ENDPTSTATUS (address 0x190001b8) */
#define USBDEV_ENDPTSTATUS_ETBR3 (1 << 19) /* Bit 19: EP xmt buffer ready for physical IN EP 3 */
#define USBDEV_ENDPTSTATUS_ETBR2 (1 << 18) /* Bit 18: EP xmt buffer ready for physical IN EP 2 */
#define USBDEV_ENDPTSTATUS_ETBR1 (1 << 17) /* Bit 17: EP xmt buffer ready for physical IN EP 1 */
#define USBDEV_ENDPTSTATUS_ETBR0 (1 << 16) /* Bit 16: EP xmt buffer ready for physical IN EP 0 */
#define USBDEV_ENDPTSTATUS_ERBR3 (1 << 3) /* Bit 3: EP recv buffer ready for physical OUT EP 3 */
#define USBDEV_ENDPTSTATUS_ERBR2 (1 << 2) /* Bit 2: EP recv buffer ready for physical OUT EP 2 */
#define USBDEV_ENDPTSTATUS_ERBR1 (1 << 1) /* Bit 1: EP recv buffer ready for physical OUT EP 1 */
#define USBDEV_ENDPTSTATUS_ERBR0 (1 << 0) /* Bit 0: EP recv buffer ready for physical OUT EP 0 */
/* USB Endpoint Complete register ENDPTCOMPLETE (address 0x190001bc) */
#define USBDEV_ENDPTCOMPLETE_ETCE3 (1 << 19) /* Bit 19: EP xmt complete event for physical IN EP 3 */
#define USBDEV_ENDPTCOMPLETE_ETCE2 (1 << 18) /* Bit 18: EP xmt complete event for physical IN EP 2 */
#define USBDEV_ENDPTCOMPLETE_ETCE1 (1 << 17) /* Bit 17: EP xmt complete event for physical IN EP 1 */
#define USBDEV_ENDPTCOMPLETE_ETCE0 (1 << 16) /* Bit 16: EP xmt complete event for physical IN EP 0 */
#define USBDEV_ENDPTCOMPLETE_ERCE3 (1 << 3) /* Bit 3: EP recv complete event for physical OUT EP 3 */
#define USBDEV_ENDPTCOMPLETE_ERCE2 (1 << 2) /* Bit 2: EP recv complete event for physical OUT EP 2 */
#define USBDEV_ENDPTCOMPLETE_ERCE1 (1 << 1) /* Bit 1: EP recv complete event for physical OUT EP 1 */
#define USBDEV_ENDPTCOMPLETE_ERCE0 (1 << 0) /* Bit 0: EP recv complete event for physical OUT EP 0 */
/* USB Endpoint 0 Control register ENDPTCTRL0 (address 0x190001c0) */
#define USBDEV_ENDPTCTRL0_TXE (1 << 23) /* Bit 23: Tx endpoint enable */
#define USBDEV_ENDPTCTRL0_TXT_SHIFT (18) /* Bits 18-19: Tx endpoint type */
#define USBDEV_ENDPTCTRL0_TXT_MASK (3 << USBDEV_ENDPTCTRL0_TXT_SHIFT)
# define USBDEV_ENDPTCTRL0_TXT_CTRL (0 << USBDEV_ENDPTCTRL0_TXT_SHIFT) /* Control */
#define USBDEV_ENDPTCTRL0_TXS (1 << 16) /* Bit 16: Tx endpoint stall */
#define USBDEV_ENDPTCTRL0_RXE (1 << 7) /* Bit 7: Rx endpoint enable */
#define USBDEV_ENDPTCTRL0_RXT_SHIFT (2) /* Bits 2-3: Endpoint type */
#define USBDEV_ENDPTCTR0L_RXT_MASK (3 << USBDEV_ENDPTCTRL0_RXT_SHIFT)
# define USBDEV_ENDPTCTRL0_RXT_CTRL (0 << USBDEV_ENDPTCTRL0_RXT_SHIFT) /* Control */
#define USBDEV_ENDPTCTRL0_RXS (1 << 0) /* Bit 0: Rx endpoint stall */
/* USB Endpoint 1-3 control registers ENDPTCTRL1-ENDPPTCTRL3 (address 0x190001c4-0x190001cc) */
#define USBDEV_ENDPTCTRL_TXE (1 << 23) /* Bit 23: Tx endpoint enable */
#define USBDEV_ENDPTCTRL_TXR (1 << 22) /* Bit 22: Tx data toggle reset */
#define USBDEV_ENDPTCTRL_TXI (1 << 21) /* Bit 21: Tx data toggle inhibit */
#define USBDEV_ENDPTCTRL_TXT_SHIFT (18) /* Bits 18-19: Tx endpoint type */
#define USBDEV_ENDPTCTRL_TXT_MASK (3 << USBDEV_ENDPTCTRL_TXT_SHIFT)
# define USBDEV_ENDPTCTRL_TXT_CTRL (0 << USBDEV_ENDPTCTRL_TXT_SHIFT) /* Control */
# define USBDEV_ENDPTCTRL_TXT_ISOC (1 << USBDEV_ENDPTCTRL_TXT_SHIFT) /* Isochronous */
# define USBDEV_ENDPTCTRL_TXT_BULK (2 << USBDEV_ENDPTCTRL_TXT_SHIFT) /* Bulk */
# define USBDEV_ENDPTCTRL_TXT_INTR (3 << USBDEV_ENDPTCTRL_TXT_SHIFT) /* Interrupt */
#define USBDEV_ENDPTCTRL_TXS (1 << 16) /* Bit 16: Tx endpoint stall */
#define USBDEV_ENDPTCTRL_RXE (1 << 7) /* Bit 7: Rx endpoint enable */
#define USBDEV_ENDPTCTRL_RXR (1 << 6) /* Bit 6: Rx data toggle reset */
#define USBDEV_ENDPTCTRL_RXI (1 << 5) /* Bit 5: Rx data toggle inhibit */
#define USBDEV_ENDPTCTRL_RXT_SHIFT (2) /* Bits 2-3: Endpoint type */
#define USBDEV_ENDPTCTRL_RXT_MASK (3 << USBDEV_ENDPTCTRL_RXT_SHIFT)
# define USBDEV_ENDPTCTRL_RXT_CTRL (0 << USBDEV_ENDPTCTRL_RXT_SHIFT) /* Control */
# define USBDEV_ENDPTCTRL_RXT_ISOC (1 << USBDEV_ENDPTCTRL_RXT_SHIFT) /* Isochronous */
# define USBDEV_ENDPTCTRL_RXT_BULK (2 << USBDEV_ENDPTCTRL_RXT_SHIFT) /* Bulk */
#define USBDEV_ENDPTCTRL_RXS (1 << 0) /* Bit 0: Rx endpoint stall */
/************************************************************************************************
* Public Types
************************************************************************************************/
/************************************************************************************************
* Public Data
************************************************************************************************/
/************************************************************************************************
* Public Functions
************************************************************************************************/
#endif /* __ARCH_ARM_SRC_LPC31XX_LPC31_USBOTG_H */
|
