|
|
/********************************************************************************************
* arch/arm/src/tiva/chip/lm4f_syscontrol.h
*
* Copyright (C) 2009-2010, 2013 Gregory Nutt. All rights reserved.
* Author: Gregory Nutt <gnutt@nuttx.org>
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions
* are met:
*
* 1. Redistributions of source code must retain the above copyright
* notice, this list of conditions and the following disclaimer.
* 2. Redistributions in binary form must reproduce the above copyright
* notice, this list of conditions and the following disclaimer in
* the documentation and/or other materials provided with the
* distribution.
* 3. Neither the name NuttX nor the names of its contributors may be
* used to endorse or promote products derived from this software
* without specific prior written permission.
*
* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
* "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
* LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
* FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE
* COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
* INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING,
* BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS
* OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED
* AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
* LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
* ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
* POSSIBILITY OF SUCH DAMAGE.
*
********************************************************************************************/
#ifndef __ARCH_ARM_SRC_TIVA_CHIP_LM4F_SYSCONTROL_H
#define __ARCH_ARM_SRC_TIVA_CHIP_LM4F_SYSCONTROL_H
/********************************************************************************************
* Included Files
********************************************************************************************/
#include <nuttx/config.h>
/********************************************************************************************
* Pre-processor Definitions
********************************************************************************************/
/* System Control Register Offsets **********************************************************/
#define TIVA_SYSCON_DID0_OFFSET 0x000 /* Device Identification 0 */
#define TIVA_SYSCON_DID1_OFFSET 0x004 /* Device Identification 1 */
#define TIVA_SYSCON_PBORCTL_OFFSET 0x030 /* Brown-Out Reset Control */
#define TIVA_SYSCON_RIS_OFFSET 0x050 /* Raw Interrupt Status */
#define TIVA_SYSCON_IMC_OFFSET 0x054 /* Interrupt Mask Control */
#define TIVA_SYSCON_MISC_OFFSET 0x058 /* Masked Interrupt Status and Clear */
#define TIVA_SYSCON_RESC_OFFSET 0x05c /* Reset Cause */
#define TIVA_SYSCON_RCC_OFFSET 0x060 /* Run-Mode Clock Configuration */
#define TIVA_SYSCON_GPIOHBCTL_OFFSET 0x06c /* GPIO High-Performance Bus Control */
#define TIVA_SYSCON_RCC2_OFFSET 0x070 /* Run-Mode Clock Configuration 2 */
#define TIVA_SYSCON_MOSCCTL_OFFSET 0x07c /* Main Oscillator Control */
#define TIVA_SYSCON_DSLPCLKCFG_OFFSET 0x144 /* Deep Sleep Clock Configuration */
#define TIVA_SYSCON_SYSPROP_OFFSET 0x14c /* System Properties */
#define TIVA_SYSCON_PIOSCCAL_OFFSET 0x150 /* Precision Internal Oscillator Calibration */
#define TIVA_SYSCON_PIOSCSTAT_OFFSET 0x154 /* Precision Internal Oscillator Statistics */
#define TIVA_SYSCON_PLLFREQ0_OFFSET 0x160 /* PLL 0 Frequency */
#define TIVA_SYSCON_PLLFREQ1_OFFSET 0x164 /* PLL 1 Frequency */
#define TIVA_SYSCON_PLLSTAT_OFFSET 0x168 /* PLL Status */
#define TIVA_SYSCON_PPWD_OFFSET 0x300 /* Watchdog Timer Peripheral Present */
#define TIVA_SYSCON_PPTIMER_OFFSET 0x304 /* 16/32-Bit Timer Peripheral Present */
#define TIVA_SYSCON_PPGPIO_OFFSET 0x308 /* GPIO Peripheral Present */
#define TIVA_SYSCON_PPDMA_OFFSET 0x30c /* uDMA Peripheral Present */
#define TIVA_SYSCON_PPHIB_OFFSET 0x314 /* Hibernation Peripheral Present */
#define TIVA_SYSCON_PPUART_OFFSET 0x318 /* UART Present */
#define TIVA_SYSCON_PPSSI_OFFSET 0x31c /* SSI Peripheral Present */
#define TIVA_SYSCON_PPI2C_OFFSET 0x320 /* I2C Peripheral Present */
#define TIVA_SYSCON_PPUSB_OFFSET 0x328 /* USB Peripheral Present */
#define TIVA_SYSCON_PPCAN_OFFSET 0x334 /* CAN Peripheral Present */
#define TIVA_SYSCON_PPADC_OFFSET 0x338 /* ADC Peripheral Present */
#define TIVA_SYSCON_PPACMP_OFFSET 0x33c /* Analog Comparator Peripheral Present */
#define TIVA_SYSCON_PPPWM_OFFSET 0x340 /* Pulse Width Modulator Peripheral Present */
#define TIVA_SYSCON_PPQEI_OFFSET 0x344 /* Quadrature Encoder Peripheral Present */
#define TIVA_SYSCON_PPEEPROM_OFFSET 0x358 /* EEPROM Peripheral Present */
#define TIVA_SYSCON_PPWTIMER_OFFSET 0x35c /* 32/64-Bit Wide Timer Peripheral Present */
#define TIVA_SYSCON_SRWD_OFFSET 0x500 /* Watchdog Timer Software Reset */
#define TIVA_SYSCON_SRTIMER_OFFSET 0x504 /* 16/32-Bit Timer Software Reset */
#define TIVA_SYSCON_SRGPIO_OFFSET 0x508 /* GPIO Software Reset */
#define TIVA_SYSCON_SRDMA_OFFSET 0x50c /* uDMA Software Reset */
#define TIVA_SYSCON_SRHIB_OFFSET 0x514 /* Hibernation Software Reset */
#define TIVA_SYSCON_SRUART_OFFSET 0x518 /* UART Software Reset*/
#define TIVA_SYSCON_SRSSI_OFFSET 0x51c /* SSI Software Reset */
#define TIVA_SYSCON_SRI2C_OFFSET 0x520 /* I2C Software Reset */
#define TIVA_SYSCON_SRUSB_OFFSET 0x528 /* USB Software Reset */
#define TIVA_SYSCON_SRCAN_OFFSET 0x534 /* CAN Software Reset */
#define TIVA_SYSCON_SRADC_OFFSET 0x538 /* ADC Software Reset */
#define TIVA_SYSCON_SRACMP_OFFSET 0x53c /* Analog Comparator Software Reset */
#define TIVA_SYSCON_SREEPROM_OFFSET 0x558 /* EEPROM Software Reset */
#define TIVA_SYSCON_SRWTIMER_OFFSET 0x55c /* 32/64-Bit Wide Timer Software Reset */
#define TIVA_SYSCON_RCGCWD_OFFSET 0x600 /* Watchdog Timer Run Mode Clock Gating Control */
#define TIVA_SYSCON_RCGCTIMER_OFFSET 0x604 /* 16/32-Bit Timer Run Mode Clock Gating Control */
#define TIVA_SYSCON_RCGCGPIO_OFFSET 0x608 /* GPIO Run Mode Clock Gating Control*/
#define TIVA_SYSCON_RCGCDMA_OFFSET 0x60c /* uDMA Run Mode Clock Gating Control*/
#define TIVA_SYSCON_RCGCHIB_OFFSET 0x614 /* Hibernation Run Mode Clock Gating Control */
#define TIVA_SYSCON_RCGCUART_OFFSET 0x618 /* UART Run Mode Clock Gating Control*/
#define TIVA_SYSCON_RCGCSSI_OFFSET 0x61c /* SSI Run Mode Clock Gating Control*/
#define TIVA_SYSCON_RCGCI2C_OFFSET 0x620 /* I2C Run Mode Clock Gating Control */
#define TIVA_SYSCON_RCGCUSB_OFFSET 0x628 /* USB Run Mode Clock Gating Control */
#define TIVA_SYSCON_RCGCCAN_OFFSET 0x634 /* CAN Run Mode Clock Gating Control */
#define TIVA_SYSCON_RCGCADC_OFFSET 0x638 /* ADC Run Mode Clock Gating Control */
#define TIVA_SYSCON_RCGCACMP_OFFSET 0x63c /* Analog Comparator Run Mode Clock Gating Control */
#define TIVA_SYSCON_RCGCEEPROM_OFFSET 0x658 /* EEPROM Run Mode Clock Gating Control */
#define TIVA_SYSCON_RCGCWTIMER_OFFSET 0x65c /* 32/64-BitWide Timer Run Mode Clock Gating Control */
#define TIVA_SYSCON_SCGCWD_OFFSET 0x700 /* Watchdog Timer Sleep Mode Clock Gating Control */
#define TIVA_SYSCON_SCGCTIMER_OFFSET 0x704 /* 16/32-Bit Timer Sleep Mode Clock Gating Control */
#define TIVA_SYSCON_SCGCGPIO_OFFSET 0x708 /* GPIO Sleep Mode Clock Gating Control */
#define TIVA_SYSCON_SCGCDMA_OFFSET 0x70c /* uDMA Sleep Mode Clock Gating Control */
#define TIVA_SYSCON_SCGCHIB_OFFSET 0x714 /* Hibernation Sleep Mode Clock Gating Control */
#define TIVA_SYSCON_SCGCUART_OFFSET 0x718 /* UART Sleep Mode Clock Gating Control */
#define TIVA_SYSCON_SCGCSSI_OFFSET 0x71c /* SSI Sleep Mode Clock Gating Control */
#define TIVA_SYSCON_SCGCI2C_OFFSET 0x720 /* I2C Sleep Mode Clock Gating Control */
#define TIVA_SYSCON_SCGCUSB_OFFSET 0x728 /* USB Sleep Mode Clock Gating Control */
#define TIVA_SYSCON_SCGCCAN_OFFSET 0x734 /* CAN Sleep Mode Clock Gating Control */
#define TIVA_SYSCON_SCGCADC_OFFSET 0x738 /* ADC Sleep Mode Clock Gating Control */
#define TIVA_SYSCON_SCGCACMP_OFFSET 0x73c /* Analog Comparator Sleep Mode Clock Gating Control */
#define TIVA_SYSCON_SCGCEEPROM_OFFSET 0x758 /* EEPROM Sleep Mode Clock Gating Control */
#define TIVA_SYSCON_SCGCWTIMER_OFFSET 0x75c /* 32/64-BitWide Timer Sleep Mode Clock Gating Control */
#define TIVA_SYSCON_DCGCWD_OFFSET 0x800 /* Watchdog Timer Deep-Sleep Mode Clock Gating Control */
#define TIVA_SYSCON_DCGCTIMER_OFFSET 0x804 /* Clock Gating Control */
#define TIVA_SYSCON_DCGCGPIO_OFFSET 0x808 /* GPIO Deep-Sleep Mode Clock Gating Control */
#define TIVA_SYSCON_DCGCDMA_OFFSET 0x80c /* uDMA Deep-Sleep Mode Clock Gating Control */
#define TIVA_SYSCON_DCGCHIB_OFFSET 0x814 /* Hibernation Deep-Sleep Mode Clock Gating Control */
#define TIVA_SYSCON_DCGCUART_OFFSET 0x818 /* UART Deep-Sleep Mode Clock Gating Control */
#define TIVA_SYSCON_DCGCSSI_OFFSET 0x81c /* SSI Deep-Sleep Mode Clock Gating Control */
#define TIVA_SYSCON_DCGCI2C_OFFSET 0x820 /* I2C Deep-Sleep Mode Clock Gating Control */
#define TIVA_SYSCON_DCGCUSB_OFFSET 0x828 /* USB Deep-Sleep Mode Clock Gating Control */
#define TIVA_SYSCON_DCGCCAN_OFFSET 0x834 /* CAN Deep-Sleep Mode Clock Gating Control */
#define TIVA_SYSCON_DCGCADC_OFFSET 0x838 /* ADC Deep-Sleep Mode Clock Gating Control */
#define TIVA_SYSCON_DCGCACMP_OFFSET 0x83c /* Analog Comparator Deep-Sleep Mode Clock Gating Control */
#define TIVA_SYSCON_DCGCEEPROM_OFFSET 0x858 /* EEPROM Deep-Sleep Mode Clock Gating Control */
#define TIVA_SYSCON_DCGCWTIMER_OFFSET 0x85c /* 32/64-BitWide Timer Deep-Sleep Mode Clock Gating Control */
#define TIVA_SYSCON_PRWD_OFFSET 0xa00 /* Watchdog Timer Peripheral Ready */
#define TIVA_SYSCON_PRTIMER_OFFSET 0xa04 /* 16/32-Bit Timer Peripheral Ready */
#define TIVA_SYSCON_PRGPIO_OFFSET 0xa08 /* GPIO Peripheral Ready */
#define TIVA_SYSCON_PRDMA_OFFSET 0xa0c /* uDMA Peripheral Ready */
#define TIVA_SYSCON_PRHIB_OFFSET 0xa14 /* Hibernation Peripheral Ready */
#define TIVA_SYSCON_PRUART_OFFSET 0xa18 /* UART Peripheral Ready */
#define TIVA_SYSCON_PRSSI_OFFSET 0xa1c /* SSI Peripheral Ready */
#define TIVA_SYSCON_PRI2C_OFFSET 0xa20 /* I2C Peripheral Ready */
#define TIVA_SYSCON_PRUSB_OFFSET 0xa28 /* USB Peripheral Ready */
#define TIVA_SYSCON_PRCAN_OFFSET 0xa34 /* CAN Peripheral Ready */
#define TIVA_SYSCON_PRADC_OFFSET 0xa38 /* ADC Peripheral Ready */
#define TIVA_SYSCON_PRACMP_OFFSET 0xa3c /* Analog Comparator Peripheral Ready */
#define TIVA_SYSCON_PREEPROM_OFFSET 0xa58 /* EEPROM Peripheral Ready */
#define TIVA_SYSCON_PRWTIMER_OFFSET 0xa5c /* 2/64-BitWide Timer Peripheral Ready */
/* System Control Legacy Register Offsets ***************************************************/
#define TIVA_SYSCON_DC0_OFFSET 0x008 /* Device Capabilities 0 */
#define TIVA_SYSCON_DC1_OFFSET 0x010 /* Device Capabilities 1 */
#define TIVA_SYSCON_DC2_OFFSET 0x014 /* Device Capabilities 2 */
#define TIVA_SYSCON_DC3_OFFSET 0x018 /* Device Capabilities 3 */
#define TIVA_SYSCON_DC4_OFFSET 0x01c /* Device Capabilities 4 */
#define TIVA_SYSCON_DC5_OFFSET 0x020 /* Device Capabilities 5 */
#define TIVA_SYSCON_DC6_OFFSET 0x024 /* Device Capabilities 6 */
#define TIVA_SYSCON_DC7_OFFSET 0x028 /* Device Capabilities 7 */
#define TIVA_SYSCON_DC8_OFFSET 0x02c /* Device Capabilities 8 */
#define TIVA_SYSCON_SRCR0_OFFSET 0x040 /* Software Reset Control 0 */
#define TIVA_SYSCON_SRCR1_OFFSET 0x044 /* Software Reset Control 1 */
#define TIVA_SYSCON_SRCR2_OFFSET 0x048 /* Software Reset Control 2 */
#define TIVA_SYSCON_RCGC0_OFFSET 0x100 /* Run Mode Clock Gating Control Register 0 */
#define TIVA_SYSCON_RCGC1_OFFSET 0x104 /* Run Mode Clock Gating Control Register 1 */
#define TIVA_SYSCON_RCGC2_OFFSET 0x108 /* Run Mode Clock Gating Control Register 2 */
#define TIVA_SYSCON_SCGC0_OFFSET 0x110 /* Sleep Mode Clock Gating Control Register 0 */
#define TIVA_SYSCON_SCGC1_OFFSET 0x114 /* Sleep Mode Clock Gating Control Register 1 */
#define TIVA_SYSCON_SCGC2_OFFSET 0x118 /* Sleep Mode Clock Gating Control Register 2 */
#define TIVA_SYSCON_DCGC0_OFFSET 0x120 /* Deep Sleep Mode Clock Gating Control Register 0 */
#define TIVA_SYSCON_DCGC1_OFFSET 0x124 /* Deep Sleep Mode Clock Gating Control Register 1 */
#define TIVA_SYSCON_DCGC2_OFFSET 0x128 /* Deep Sleep Mode Clock Gating Control Register 2 */
#define TIVA_SYSCON_DC9_OFFSET 0x190 /* Device Capabilities */
#define TIVA_SYSCON_NVMSTAT_OFFSET 0x1a0 /* Non-Volatile Memory Information */
/* System Control Register Addresses ********************************************************/
#define TIVA_SYSCON_DID0 (TIVA_SYSCON_BASE + TIVA_SYSCON_DID0_OFFSET)
#define TIVA_SYSCON_DID1 (TIVA_SYSCON_BASE + TIVA_SYSCON_DID1_OFFSET)
#define TIVA_SYSCON_PBORCTL (TIVA_SYSCON_BASE + TIVA_SYSCON_PBORCTL_OFFSET)
#define TIVA_SYSCON_RIS (TIVA_SYSCON_BASE + TIVA_SYSCON_RIS_OFFSET)
#define TIVA_SYSCON_IMC (TIVA_SYSCON_BASE + TIVA_SYSCON_IMC_OFFSET)
#define TIVA_SYSCON_MISC (TIVA_SYSCON_BASE + TIVA_SYSCON_MISC_OFFSET)
#define TIVA_SYSCON_RESC (TIVA_SYSCON_BASE + TIVA_SYSCON_RESC_OFFSET)
#define TIVA_SYSCON_RCC (TIVA_SYSCON_BASE + TIVA_SYSCON_RCC_OFFSET)
#define TIVA_SYSCON_GPIOHBCTL (TIVA_SYSCON_BASE + TIVA_SYSCON_GPIOHBCTL_OFFSET)
#define TIVA_SYSCON_RCC2 (TIVA_SYSCON_BASE + TIVA_SYSCON_RCC2_OFFSET)
#define TIVA_SYSCON_MOSCCTL (TIVA_SYSCON_BASE + TIVA_SYSCON_MOSCCTL_OFFSET)
#define TIVA_SYSCON_DSLPCLKCFG (TIVA_SYSCON_BASE + TIVA_SYSCON_DSLPCLKCFG_OFFSET)
#define TIVA_SYSCON_SYSPROP (TIVA_SYSCON_BASE + TIVA_SYSCON_SYSPROP_OFFSET)
#define TIVA_SYSCON_PIOSCCAL (TIVA_SYSCON_BASE + TIVA_SYSCON_PIOSCCAL_OFFSET)
#define TIVA_SYSCON_PIOSCSTAT (TIVA_SYSCON_BASE + TIVA_SYSCON_PIOSCSTAT_OFFSET)
#define TIVA_SYSCON_PLLFREQ0 (TIVA_SYSCON_BASE + TIVA_SYSCON_PLLFREQ0_OFFSET)
#define TIVA_SYSCON_PLLFREQ1 (TIVA_SYSCON_BASE + TIVA_SYSCON_PLLFREQ1_OFFSET)
#define TIVA_SYSCON_PLLSTAT (TIVA_SYSCON_BASE + TIVA_SYSCON_PLLSTAT_OFFSET)
#define TIVA_SYSCON_PPWD (TIVA_SYSCON_BASE + TIVA_SYSCON_PPWD_OFFSET)
#define TIVA_SYSCON_PPTIMER (TIVA_SYSCON_BASE + TIVA_SYSCON_PPTIMER_OFFSET)
#define TIVA_SYSCON_PPGPIO (TIVA_SYSCON_BASE + TIVA_SYSCON_PPGPIO_OFFSET)
#define TIVA_SYSCON_PPDMA (TIVA_SYSCON_BASE + TIVA_SYSCON_PPDMA_OFFSET)
#define TIVA_SYSCON_PPHIB (TIVA_SYSCON_BASE + TIVA_SYSCON_PPHIB_OFFSET)
#define TIVA_SYSCON_PPUART (TIVA_SYSCON_BASE + TIVA_SYSCON_PPUART_OFFSET)
#define TIVA_SYSCON_PPSSI (TIVA_SYSCON_BASE + TIVA_SYSCON_PPSSI_OFFSET)
#define TIVA_SYSCON_PPI2C (TIVA_SYSCON_BASE + TIVA_SYSCON_PPI2C_OFFSET)
#define TIVA_SYSCON_PPUSB (TIVA_SYSCON_BASE + TIVA_SYSCON_PPUSB_OFFSET)
#define TIVA_SYSCON_PPCAN (TIVA_SYSCON_BASE + TIVA_SYSCON_PPCAN_OFFSET)
#define TIVA_SYSCON_PPADC (TIVA_SYSCON_BASE + TIVA_SYSCON_PPADC_OFFSET)
#define TIVA_SYSCON_PPACMP (TIVA_SYSCON_BASE + TIVA_SYSCON_PPACMP_OFFSET)
#define TIVA_SYSCON_PPPWM (TIVA_SYSCON_BASE + TIVA_SYSCON_PPPWM_OFFSET)
#define TIVA_SYSCON_PPQEI (TIVA_SYSCON_BASE + TIVA_SYSCON_PPQEI_OFFSET)
#define TIVA_SYSCON_PPEEPROM (TIVA_SYSCON_BASE + TIVA_SYSCON_PPEEPROM_OFFSET)
#define TIVA_SYSCON_PPWTIMER (TIVA_SYSCON_BASE + TIVA_SYSCON_PPWTIMER_OFFSET)
#define TIVA_SYSCON_SRWD (TIVA_SYSCON_BASE + TIVA_SYSCON_SRWD_OFFSET)
#define TIVA_SYSCON_SRTIMER (TIVA_SYSCON_BASE + TIVA_SYSCON_SRTIMER_OFFSET)
#define TIVA_SYSCON_SRGPIO (TIVA_SYSCON_BASE + TIVA_SYSCON_SRGPIO_OFFSET)
#define TIVA_SYSCON_SRDMA (TIVA_SYSCON_BASE + TIVA_SYSCON_SRDMA_OFFSET)
#define TIVA_SYSCON_SRHIB (TIVA_SYSCON_BASE + TIVA_SYSCON_SRHIB_OFFSET)
#define TIVA_SYSCON_SRUART (TIVA_SYSCON_BASE + TIVA_SYSCON_SRUART_OFFSET)
#define TIVA_SYSCON_SRSSI (TIVA_SYSCON_BASE + TIVA_SYSCON_SRSSI_OFFSET)
#define TIVA_SYSCON_SRI2C (TIVA_SYSCON_BASE + TIVA_SYSCON_SRI2C_OFFSET)
#define TIVA_SYSCON_SRUSB (TIVA_SYSCON_BASE + TIVA_SYSCON_SRUSB_OFFSET)
#define TIVA_SYSCON_SRCAN (TIVA_SYSCON_BASE + TIVA_SYSCON_SRCAN_OFFSET)
#define TIVA_SYSCON_SRADC (TIVA_SYSCON_BASE + TIVA_SYSCON_SRADC_OFFSET)
#define TIVA_SYSCON_SRACMP (TIVA_SYSCON_BASE + TIVA_SYSCON_SRACMP_OFFSET)
#define TIVA_SYSCON_SREEPROM (TIVA_SYSCON_BASE + TIVA_SYSCON_SREEPROM_OFFSET)
#define TIVA_SYSCON_SRWTIMER (TIVA_SYSCON_BASE + TIVA_SYSCON_SRWTIMER_OFFSET)
#define TIVA_SYSCON_RCGCWD (TIVA_SYSCON_BASE + TIVA_SYSCON_RCGCWD_OFFSET)
#define TIVA_SYSCON_RCGCTIMER (TIVA_SYSCON_BASE + TIVA_SYSCON_RCGCTIMER_OFFSET)
#define TIVA_SYSCON_RCGCGPIO (TIVA_SYSCON_BASE + TIVA_SYSCON_RCGCGPIO_OFFSET)
#define TIVA_SYSCON_RCGCDMA (TIVA_SYSCON_BASE + TIVA_SYSCON_RCGCDMA_OFFSET)
#define TIVA_SYSCON_RCGCHIB (TIVA_SYSCON_BASE + TIVA_SYSCON_RCGCHIB_OFFSET)
#define TIVA_SYSCON_RCGCUART (TIVA_SYSCON_BASE + TIVA_SYSCON_RCGCUART_OFFSET)
#define TIVA_SYSCON_RCGCSSI (TIVA_SYSCON_BASE + TIVA_SYSCON_RCGCSSI_OFFSET)
#define TIVA_SYSCON_RCGCI2C (TIVA_SYSCON_BASE + TIVA_SYSCON_RCGCI2C_OFFSET)
#define TIVA_SYSCON_RCGCUSB (TIVA_SYSCON_BASE + TIVA_SYSCON_RCGCUSB_OFFSET)
#define TIVA_SYSCON_RCGCCAN (TIVA_SYSCON_BASE + TIVA_SYSCON_RCGCCAN_OFFSET)
#define TIVA_SYSCON_RCGCADC (TIVA_SYSCON_BASE + TIVA_SYSCON_RCGCADC_OFFSET)
#define TIVA_SYSCON_RCGCACMP (TIVA_SYSCON_BASE + TIVA_SYSCON_RCGCACMP_OFFSET)
#define TIVA_SYSCON_RCGCEEPROM (TIVA_SYSCON_BASE + TIVA_SYSCON_RCGCEEPROM_OFFSET)
#define TIVA_SYSCON_RCGCWTIMER (TIVA_SYSCON_BASE + TIVA_SYSCON_RCGCWTIMER_OFFSET)
#define TIVA_SYSCON_SCGCWD (TIVA_SYSCON_BASE + TIVA_SYSCON_SCGCWD_OFFSET)
#define TIVA_SYSCON_SCGCTIMER (TIVA_SYSCON_BASE + TIVA_SYSCON_SCGCTIMER_OFFSET)
#define TIVA_SYSCON_SCGCGPIO (TIVA_SYSCON_BASE + TIVA_SYSCON_SCGCGPIO_OFFSET)
#define TIVA_SYSCON_SCGCDMA (TIVA_SYSCON_BASE + TIVA_SYSCON_SCGCDMA_OFFSET)
#define TIVA_SYSCON_SCGCHIB (TIVA_SYSCON_BASE + TIVA_SYSCON_SCGCHIB_OFFSET)
#define TIVA_SYSCON_SCGCUART (TIVA_SYSCON_BASE + TIVA_SYSCON_SCGCUART_OFFSET)
#define TIVA_SYSCON_SCGCSSI (TIVA_SYSCON_BASE + TIVA_SYSCON_SCGCSSI_OFFSET)
#define TIVA_SYSCON_SCGCI2C (TIVA_SYSCON_BASE + TIVA_SYSCON_SCGCI2C_OFFSET)
#define TIVA_SYSCON_SCGCUSB (TIVA_SYSCON_BASE + TIVA_SYSCON_SCGCUSB_OFFSET)
#define TIVA_SYSCON_SCGCCAN (TIVA_SYSCON_BASE + TIVA_SYSCON_SCGCCAN_OFFSET)
#define TIVA_SYSCON_SCGCADC (TIVA_SYSCON_BASE + TIVA_SYSCON_SCGCADC_OFFSET)
#define TIVA_SYSCON_SCGCACMP (TIVA_SYSCON_BASE + TIVA_SYSCON_SCGCACMP_OFFSET)
#define TIVA_SYSCON_SCGCEEPROM (TIVA_SYSCON_BASE + TIVA_SYSCON_SCGCEEPROM_OFFSET)
#define TIVA_SYSCON_SCGCWTIMER (TIVA_SYSCON_BASE + TIVA_SYSCON_SCGCWTIMER_OFFSET)
#define TIVA_SYSCON_DCGCWD (TIVA_SYSCON_BASE + TIVA_SYSCON_DCGCWD_OFFSET)
#define TIVA_SYSCON_DCGCTIMER (TIVA_SYSCON_BASE + TIVA_SYSCON_DCGCTIMER_OFFSET)
#define TIVA_SYSCON_DCGCGPIO (TIVA_SYSCON_BASE + TIVA_SYSCON_DCGCGPIO_OFFSET)
#define TIVA_SYSCON_DCGCDMA (TIVA_SYSCON_BASE + TIVA_SYSCON_DCGCDMA_OFFSET)
#define TIVA_SYSCON_DCGCHIB (TIVA_SYSCON_BASE + TIVA_SYSCON_DCGCHIB_OFFSET)
#define TIVA_SYSCON_DCGCUART (TIVA_SYSCON_BASE + TIVA_SYSCON_DCGCUART_OFFSET)
#define TIVA_SYSCON_DCGCSSI (TIVA_SYSCON_BASE + TIVA_SYSCON_DCGCSSI_OFFSET)
#define TIVA_SYSCON_DCGCI2C (TIVA_SYSCON_BASE + TIVA_SYSCON_DCGCI2C_OFFSET)
#define TIVA_SYSCON_DCGCUSB (TIVA_SYSCON_BASE + TIVA_SYSCON_DCGCUSB_OFFSET)
#define TIVA_SYSCON_DCGCCAN (TIVA_SYSCON_BASE + TIVA_SYSCON_DCGCCAN_OFFSET)
#define TIVA_SYSCON_DCGCADC (TIVA_SYSCON_BASE + TIVA_SYSCON_DCGCADC_OFFSET)
#define TIVA_SYSCON_DCGCACMP (TIVA_SYSCON_BASE + TIVA_SYSCON_DCGCACMP_OFFSET)
#define TIVA_SYSCON_DCGCEEPROM (TIVA_SYSCON_BASE + TIVA_SYSCON_DCGCEEPROM_OFFSET)
#define TIVA_SYSCON_DCGCWTIMER (TIVA_SYSCON_BASE + TIVA_SYSCON_DCGCWTIMER_OFFSET)
#define TIVA_SYSCON_PRWD (TIVA_SYSCON_BASE + TIVA_SYSCON_PRWD_OFFSET)
#define TIVA_SYSCON_PRTIMER (TIVA_SYSCON_BASE + TIVA_SYSCON_PRTIMER_OFFSET)
#define TIVA_SYSCON_PRGPIO (TIVA_SYSCON_BASE + TIVA_SYSCON_PRGPIO_OFFSET)
#define TIVA_SYSCON_PRDMA (TIVA_SYSCON_BASE + TIVA_SYSCON_PRDMA_OFFSET)
#define TIVA_SYSCON_PRHIB (TIVA_SYSCON_BASE + TIVA_SYSCON_PRHIB_OFFSET)
#define TIVA_SYSCON_PRUART (TIVA_SYSCON_BASE + TIVA_SYSCON_PRUART_OFFSET)
#define TIVA_SYSCON_PRSSI (TIVA_SYSCON_BASE + TIVA_SYSCON_PRSSI_OFFSET)
#define TIVA_SYSCON_PRI2C (TIVA_SYSCON_BASE + TIVA_SYSCON_PRI2C_OFFSET)
#define TIVA_SYSCON_PRUSB (TIVA_SYSCON_BASE + TIVA_SYSCON_PRUSB_OFFSET)
#define TIVA_SYSCON_PRCAN (TIVA_SYSCON_BASE + TIVA_SYSCON_PRCAN_OFFSET)
#define TIVA_SYSCON_PRADC (TIVA_SYSCON_BASE + TIVA_SYSCON_PRADC_OFFSET)
#define TIVA_SYSCON_PRACMP (TIVA_SYSCON_BASE + TIVA_SYSCON_PRACMP_OFFSET)
#define TIVA_SYSCON_PREEPROM (TIVA_SYSCON_BASE + TIVA_SYSCON_PREEPROM_OFFSET)
#define TIVA_SYSCON_PRWTIMER (TIVA_SYSCON_BASE + TIVA_SYSCON_PRWTIMER_OFFSET)
/* System Control Legacy Register Addresses *************************************************/
#define TIVA_SYSCON_DC0 (TIVA_SYSCON_BASE + TIVA_SYSCON_DC0_OFFSET)
#define TIVA_SYSCON_DC1 (TIVA_SYSCON_BASE + TIVA_SYSCON_DC1_OFFSET)
#define TIVA_SYSCON_DC2 (TIVA_SYSCON_BASE + TIVA_SYSCON_DC2_OFFSET)
#define TIVA_SYSCON_DC3 (TIVA_SYSCON_BASE + TIVA_SYSCON_DC3_OFFSET)
#define TIVA_SYSCON_DC4 (TIVA_SYSCON_BASE + TIVA_SYSCON_DC4_OFFSET)
#define TIVA_SYSCON_DC5 (TIVA_SYSCON_BASE + TIVA_SYSCON_DC5_OFFSET)
#define TIVA_SYSCON_DC6 (TIVA_SYSCON_BASE + TIVA_SYSCON_DC6_OFFSET)
#define TIVA_SYSCON_DC7 (TIVA_SYSCON_BASE + TIVA_SYSCON_DC7_OFFSET)
#define TIVA_SYSCON_DC8 (TIVA_SYSCON_BASE + TIVA_SYSCON_DC8_OFFSET)
#define TIVA_SYSCON_SRCR0 (TIVA_SYSCON_BASE + TIVA_SYSCON_SRCR0_OFFSET)
#define TIVA_SYSCON_SRCR1 (TIVA_SYSCON_BASE + TIVA_SYSCON_SRCR1_OFFSET)
#define TIVA_SYSCON_SRCR2 (TIVA_SYSCON_BASE + TIVA_SYSCON_SRCR2_OFFSET)
#define TIVA_SYSCON_RCGC0 (TIVA_SYSCON_BASE + TIVA_SYSCON_RCGC0_OFFSET)
#define TIVA_SYSCON_RCGC1 (TIVA_SYSCON_BASE + TIVA_SYSCON_RCGC1_OFFSET)
#define TIVA_SYSCON_RCGC2 (TIVA_SYSCON_BASE + TIVA_SYSCON_RCGC2_OFFSET)
#define TIVA_SYSCON_SCGC0 (TIVA_SYSCON_BASE + TIVA_SYSCON_SCGC0_OFFSET)
#define TIVA_SYSCON_SCGC1 (TIVA_SYSCON_BASE + TIVA_SYSCON_SCGC1_OFFSET)
#define TIVA_SYSCON_SCGC2 (TIVA_SYSCON_BASE + TIVA_SYSCON_SCGC2_OFFSET)
#define TIVA_SYSCON_DCGC0 (TIVA_SYSCON_BASE + TIVA_SYSCON_DCGC0_OFFSET)
#define TIVA_SYSCON_DCGC1 (TIVA_SYSCON_BASE + TIVA_SYSCON_DCGC1_OFFSET)
#define TIVA_SYSCON_DCGC2 (TIVA_SYSCON_BASE + TIVA_SYSCON_DCGC2_OFFSET)
#define TIVA_SYSCON_DC9 (TIVA_SYSCON_BASE + TIVA_SYSCON_DC9_OFFSET)
#define TIVA_SYSCON_NVMSTAT (TIVA_SYSCON_BASE + TIVA_SYSCON_NVMSTAT_OFFSET)
/* System Control Register Bit Definitions **************************************************/
/* Device Identification 0 */
#define SYSCON_DID0_MINOR_SHIFT 0 /* Bits 7-0: Minor Revision of the device */
#define SYSCON_DID0_MINOR_MASK (0xff << SYSCON_DID0_MINOR_SHIFT)
#define SYSCON_DID0_MAJOR_SHIFT 8 /* Bits 15-8: Major Revision of the device */
#define SYSCON_DID0_MAJOR_MASK (0xff << SYSCON_DID0_MAJOR_SHIFT)
#define SYSCON_DID0_CLASS_SHIFT 16 /* Bits 23-16: Device Class */
#define SYSCON_DID0_CLASS_MASK (0xff << SYSCON_DID0_CLASS_SHIFT)
#define SYSCON_DID0_VER_SHIFT 28 /* Bits 30-28: DID0 Version */
#define SYSCON_DID0_VER_MASK (7 << SYSCON_DID0_VER_SHIFT)
/* Device Identification 1 */
#define SYSCON_DID1_QUAL_SHIFT 0 /* Bits 1-0: Qualification Status */
#define SYSCON_DID1_QUAL_MASK (0x03 << SYSCON_DID1_QUAL_SHIFT)
#define SYSCON_DID1_ROHS (1 << 2) /* Bit 2: RoHS-Compliance */
#define SYSCON_DID1_PKG_SHIFT 3 /* Bits 4-3: Package Type */
#define SYSCON_DID1_PKG_MASK (0x03 << SYSCON_DID1_PKG_SHIFT)
#define SYSCON_DID1_TEMP_SHIFT 5 /* Bits 7-5: Temperature Range */
#define SYSCON_DID1_TEMP_MASK (0x07 << SYSCON_DID1_TEMP_SHIFT)
#define SYSCON_DID1_PINCOUNT_SHIFT 13 /* Bits 15-13: Package Pin Count */
#define SYSCON_DID1_PINCOUNT_MASK (0x07 << SYSCON_DID1_PINCOUNT_SHIFT)
#define SYSCON_DID1_PARTNO_SHIFT 16 /* Bits 23-16: Part Number */
#define SYSCON_DID1_PARTNO_MASK (0xff << SYSCON_DID1_PARTNO_SHIFT)
#define SYSCON_DID1_FAM_SHIFT 24 /* Bits 27-24: Family */
#define SYSCON_DID1_FAM_MASK (0x0f << SYSCON_DID1_FAM_SHIFT)
#define SYSCON_DID1_VER_SHIFT 28 /* Bits 31-28: DID1 Version */
#define SYSCON_DID1_VER_MASK (0x0f << SYSCON_DID1_VER_SHIFT)
/* Brown-Out Reset Control */
#define SYSCON_PBORCTL_BORI1 (1 << 1) /* Bit 1: VDD under BOR1 Event Action */
#define SYSCON_PBORCTL_BORI0 (1 << 2) /* Bit 2: VDD under BOR0 Event Action */
/* Raw Interrupt Status */
#define SYSCON_RIS_BORR1RIS (1 << 1) /* Bit 1: VDD under BOR1 Raw Interrupt Status */
#define SYSCON_RIS_MOFRIS (1 << 3) /* Bit 3: Main Oscillator Failure Raw Interrupt Status */
#define SYSCON_RIS_PLLLRIS (1 << 6) /* Bit 6: PLL Lock Raw Interrupt Status */
#define SYSCON_RIS_USBPLLLRIS (1 << 7) /* Bit 7: USB PLL Lock Raw Interrupt Status */
#define SYSCON_RIS_MOSCPUPRIS (1 << 8) /* Bit 8: MOSC Power Up Raw Interrupt Status */
#define SYSCON_RIS_VDDARIS (1 << 10) /* Bit 10: VDDA Power OK Event Raw Interrupt Status */
#define SYSCON_RIS_BOR0RIS (1 << 11) /* Bit 11: VDD under BOR0 Raw Interrupt Status */
/* Interrupt Mask Control */
#define SYSCON_IMC_BORR1RIM (1 << 1) /* Bit 1: VDD under BOR1 Raw Interrupt Mask */
#define SYSCON_IMC_MOFRIM (1 << 3) /* Bit 3: Main Oscillator Failure Raw Interrupt Mask */
#define SYSCON_IMC_PLLLRIM (1 << 6) /* Bit 6: PLL Lock Raw Interrupt Mask */
#define SYSCON_IMC_USBPLLLRIM (1 << 7) /* Bit 7: USB PLL Lock Raw Interrupt Mask */
#define SYSCON_IMC_MOSCPUPRIM (1 << 8) /* Bit 8: MOSC Power Up Raw Interrupt Mask */
#define SYSCON_IMC_VDDARIM (1 << 10) /* Bit 10: VDDA Power OK Event Raw Interrupt Mask */
#define SYSCON_IMC_BOR0RIM (1 << 11) /* Bit 11: VDD under BOR0 Raw Interrupt Mask */
/* Masked Interrupt Status and Clear */
#define SYSCON_MISC_BORR1MIS (1 << 1) /* Bit 1: VDD under BOR1 Masked Interrupt Status */
#define SYSCON_MISC_MOFMIS (1 << 3) /* Bit 3: Main Oscillator Failure Masked Interrupt Status */
#define SYSCON_MISC_PLLLMIS (1 << 6) /* Bit 6: PLL Lock Masked Interrupt Status */
#define SYSCON_MISC_USBPLLLMIS (1 << 7) /* Bit 7: USB PLL Lock Masked Interrupt Status */
#define SYSCON_MISC_MOSCPUPMIS (1 << 8) /* Bit 8: MOSC Power Up Masked Interrupt Status */
#define SYSCON_MISC_VDDAMIS (1 << 10) /* Bit 10: VDDA Power OK Event Masked Interrupt Status */
#define SYSCON_MISC_BOR0MIS (1 << 11) /* Bit 11: VDD under BOR0 Masked Interrupt Status */
/* Reset Cause */
#define SYSCON_RESC_EXT (1 << 0) /* Bit 0: External Reset */
#define SYSCON_RESC_POR (1 << 1) /* Bit 1: Power-On Reset */
#define SYSCON_RESC_BOR (1 << 2) /* Bit 2: Brown-Out Reset */
#define SYSCON_RESC_WDT0 (1 << 3) /* Bit 3: Watchdog Timer 0 Reset */
#define SYSCON_RESC_SW (1 << 4) /* Bit 4: Software Reset */
#define SYSCON_RESC_WDT1 (1 << 5) /* Bit 5: Watchdog Timer 1 Reset */
#define SYSCON_RESC_MOSCFAIL (1 << 16) /* Bit 16: MOSC Failure Reset */
/* Run-Mode Clock Configuration */
#define SYSCON_RCC_MOSCDIS (1 << 0) /* Bit 0: Main Oscillator Disable */
#define SYSCON_RCC_OSCSRC_SHIFT 4 /* Bits 5-4: Oscillator Source */
#define SYSCON_RCC_OSCSRC_MASK (0x03 << SYSCON_RCC_OSCSRC_SHIFT)
# define SYSCON_RCC_OSCSRC_MOSC (0 << SYSCON_RCC_OSCSRC_SHIFT) /* Main oscillator */
# define SYSCON_RCC_OSCSRC_PIOSC (1 << SYSCON_RCC_OSCSRC_SHIFT) /* Precision internal oscillator (reset) */
# define SYSCON_RCC_OSCSRC_PIOSC4 (2 << SYSCON_RCC_OSCSRC_SHIFT) /* Precision internal oscillator / 4 */
# define SYSCON_RCC_OSCSRC_LFIOSC (3 << SYSCON_RCC_OSCSRC_SHIFT) /* Low-frequency internal oscillator */
#define SYSCON_RCC_XTAL_SHIFT 6 /* Bits 10-6: Crystal Value */
#define SYSCON_RCC_XTAL_MASK (31 << SYSCON_RCC_XTAL_SHIFT)
# define SYSCON_RCC_XTAL4000KHZ (6 << SYSCON_RCC_XTAL_SHIFT) /* 4 MHz (NO PLL) */
# define SYSCON_RCC_XTAL4096KHZ (7 << SYSCON_RCC_XTAL_SHIFT) /* 4.096 MHz (NO PLL) */
# define SYSCON_RCC_XTAL4915p2KHZ (8 << SYSCON_RCC_XTAL_SHIFT) /* 4.9152 MHz (NO PLL) */
# define SYSCON_RCC_XTAL5000KHZ (9 << SYSCON_RCC_XTAL_SHIFT) /* 5 MHz (USB) */
# define SYSCON_RCC_XTAL5120KHZ (10 << SYSCON_RCC_XTAL_SHIFT) /* 5.12 MHz */
# define SYSCON_RCC_XTAL6000KHZ (11 << SYSCON_RCC_XTAL_SHIFT) /* 6 MHz (USB) */
# define SYSCON_RCC_XTAL6144KHZ (12 << SYSCON_RCC_XTAL_SHIFT) /* 6.144 MHz */
# define SYSCON_RCC_XTAL7372p8KHZ (13 << SYSCON_RCC_XTAL_SHIFT) /* 7.3728 MHz */
# define SYSCON_RCC_XTAL8000KHZ (14 << SYSCON_RCC_XTAL_SHIFT) /* 8 MHz (USB) */
# define SYSCON_RCC_XTAL8192KHZ (15 << SYSCON_RCC_XTAL_SHIFT) /* 8.192 MHz */
# define SYSCON_RCC_XTAL10000KHZ (16 << SYSCON_RCC_XTAL_SHIFT) /* 10.0 MHz (USB) */
# define SYSCON_RCC_XTAL12000KHZ (17 << SYSCON_RCC_XTAL_SHIFT) /* 12.0 MHz (USB) */
# define SYSCON_RCC_XTAL12288KHZ (18 << SYSCON_RCC_XTAL_SHIFT) /* 12.288 MHz */
# define SYSCON_RCC_XTAL13560KHZ (19 << SYSCON_RCC_XTAL_SHIFT) /* 13.56 MHz */
# define SYSCON_RCC_XTAL14318p18KHZ (20 << SYSCON_RCC_XTAL_SHIFT) /* 14.31818 MHz */
# define SYSCON_RCC_XTAL16000KHZ (21 << SYSCON_RCC_XTAL_SHIFT) /* 16.0 MHz (USB) */
# define SYSCON_RCC_XTAL16384KHZ (22 << SYSCON_RCC_XTAL_SHIFT) /* 16.384 MHz */
# define SYSCON_RCC_XTAL18000KHZ (23 << SYSCON_RCC_XTAL_SHIFT) /* 18.0 MHz (USB) */
# define SYSCON_RCC_XTAL20000KHZ (24 << SYSCON_RCC_XTAL_SHIFT) /* 20.0 MHz (USB) */
# define SYSCON_RCC_XTAL24000KHZ (25 << SYSCON_RCC_XTAL_SHIFT) /* 24.0 MHz (USB) */
# define SYSCON_RCC_XTAL25000KHZ (26 << SYSCON_RCC_XTAL_SHIFT) /* 25.0 MHz (USB) */
#define SYSCON_RCC_BYPASS (1 << 11) /* Bit 11: PLL Bypass */
#define SYSCON_RCC_PWRDN (1 << 13) /* Bit 13: PLL Power Down */
#define SYSCON_RCC_USESYSDIV (1 << 22) /* Bit 22: Enable System Clock Divider */
#define SYSCON_RCC_SYSDIV_SHIFT 23 /* Bits 26-23: System Clock Divisor */
#define SYSCON_RCC_SYSDIV_MASK (0x0f << SYSCON_RCC_SYSDIV_SHIFT)
# define SYSCON_RCC_SYSDIV(n) (((n)-1) << SYSCON_RCC_SYSDIV_SHIFT)
#define SYSCON_RCC_ACG (1 << 27) /* Bit 27: Auto Clock Gating */
/* GPIO High-Performance Bus Control */
#define SYSCON_GPIOHBCTL_PORTA (1 << 0) /* Bit 0: Port A Advanced High-Performance Bus */
#define SYSCON_GPIOHBCTL_PORTB (1 << 1) /* Bit 1: Port B Advanced High-Performance Bus */
#define SYSCON_GPIOHBCTL_PORTC (1 << 2) /* Bit 2: Port C Advanced High-Performance Bus */
#define SYSCON_GPIOHBCTL_PORTD (1 << 3) /* Bit 3: Port D Advanced High-Performance Bus */
#define SYSCON_GPIOHBCTL_PORTE (1 << 4) /* Bit 4: Port E Advanced High-Performance Bus */
#define SYSCON_GPIOHBCTL_PORTF (1 << 5) /* Bit 5: Port F Advanced High-Performance Bus */
/* Run-Mode Clock Configuration 2 */
#define SYSCON_RCC2_OSCSRC2_SHIFT 4 /* Bits 6-4: Oscillator Source */
#define SYSCON_RCC2_OSCSRC2_MASK (7 << SYSCON_RCC2_OSCSRC2_SHIFT)
# define SYSCON_RCC2_OSCSRC2_MOSC (0 << SYSCON_RCC2_OSCSRC2_SHIFT) /* Main oscillator */
# define SYSCON_RCC2_OSCSRC2_PIOSC (1 << SYSCON_RCC2_OSCSRC2_SHIFT) /* Precision internal oscillator (reset) */
# define SYSCON_RCC2_OSCSRC2_PIOSC4 (2 << SYSCON_RCC2_OSCSRC2_SHIFT) /* Precision internal oscillator / 4 */
# define SYSCON_RCC2_OSCSRC2_LFIOSC (4 << SYSCON_RCC2_OSCSRC2_SHIFT) /* Low-frequency internal oscillator */
# define SYSCON_RCC2_OSCSRC2_32768HZ (7 << SYSCON_RCC2_OSCSRC2_SHIFT) /* 32.768KHz external oscillator */
#define SYSCON_RCC2_BYPASS2 (1 << 11) /* Bit 11: Bypass PLL */
#define SYSCON_RCC2_PWRDN2 (1 << 13) /* Bit 13: Power-Down PLL */
#define SYSCON_RCC2_USBPWRDN (1 << 14) /* Bit 14: Power-Down USB PLL */
#define SYSCON_RCC2_SYSDIV2LSB (1 << 22) /* Bit 22: Additional LSB for SYSDIV2 */
#define SYSCON_RCC2_SYSDIV2_SHIFT 23 /* Bits 28-23: System Clock Divisor */
#define SYSCON_RCC2_SYSDIV2_MASK (0x3f << SYSCON_RCC2_SYSDIV2_SHIFT)
# define SYSCON_RCC2_SYSDIV(n) ((n-1) << SYSCON_RCC2_SYSDIV2_SHIFT)
# define SYSCON_RCC2_SYSDIV_DIV400(n) (((n-1) >> 1) << SYSCON_RCC2_SYSDIV2_SHIFT)
#define SYSCON_RCC2_DIV400 (1 << 30) /* Bit 30: Divide PLL as 400 MHz vs. 200 MHz */
#define SYSCON_RCC2_USERCC2 (1 << 31) /* Bit 31: Use RCC2 When set */
/* Main Oscillator Control */
#define SYSCON_MOSCCTL_CVAL (1 << 0) /* Bit 0: Clock Validation for MOSC */
#define SYSCON_MOSCCTL_MOSCIM (1 << 1) /* Bit 1: MOSC Failure Action */
#define SYSCON_MOSCCTL_NOXTAL (1 << 2) /* Bit 2: No Crystal Connected */
/* Deep Sleep Clock Configuration */
#define SYSCON_DSLPCLKCFG_DSOSCSRC_SHIFT 4 /* Bits 6-4: Clock Source */
#define SYSCON_DSLPCLKCFG_DSOSCSRC_MASK (7 << SYSCON_DSLPCLKCFG_DSOSCSRC_SHIFT)
# define SYSCON_DSLPCLKCFG_DSOSCSRC_MOSC (0 << SYSCON_DSLPCLKCFG_DSOSCSRC_SHIFT) /* Main oscillator */
# define SYSCON_DSLPCLKCFG_DSOSCSRC_PIOSC (1 << SYSCON_DSLPCLKCFG_DSOSCSRC_SHIFT) /* Precision internal oscillator (reset) */
# define SYSCON_DSLPCLKCFG_DSOSCSRC_PIOSC4 (2 << SYSCON_DSLPCLKCFG_DSOSCSRC_SHIFT) /* Precision internal oscillator / 4 */
# define SYSCON_DSLPCLKCFG_DSOSCSRC_LFIOSC (4 << SYSCON_DSLPCLKCFG_DSOSCSRC_SHIFT) /* Low-frequency internal oscillator */
# define SYSCON_DSLPCLKCFG_DSOSCSRC_32768KHZ (7 << SYSCON_DSLPCLKCFG_DSOSCSRC_SHIFT) /* 32.768KHz external oscillator */
#define SYSCON_DSLPCLKCFG_DSDIVORIDE_SHIFT 23 /* Bits 28-23: Divider Field Override */
#define SYSCON_DSLPCLKCFG_DSDIVORIDE_MASK (0x3f << SYSCON_DSLPCLKCFG_DSDIVORIDE_SHIFT)
# define SYSCON_DSLPCLKCFG_DSDIVORIDE(b) (((n)-1) << SYSCON_DSLPCLKCFG_DSDIVORIDE_SHIFT)
/* System Properties */
#define SYSCON_SYSPROP_FPU (1 << 0) /* Bit 0: FPU Present */
/* Precision Internal Oscillator Calibration */
#define SYSCON_PIOSCCAL_UT_SHIFT (0) /* Bits 0-6: User Trim Value */
#define SYSCON_PIOSCCAL_UT_MASK (0x7f << SYSCON_PIOSCCAL_UT_SHIFT)
#define SYSCON_PIOSCCAL_UPDATE (1 << 8) /* Bit 8: Update Trim */
#define SYSCON_PIOSCCAL_CAL (1 << 9) /* Bit 9: Start Calibration */
#define SYSCON_PIOSCCAL_UTEN (1 << 31) /* Bit 31: Use User Trim Value */
/* Precision Internal Oscillator Statistics */
#define SYSCON_PIOSCSTAT_CT_SHIFT (0) /* Bits 0-6: Calibration Trim Value */
#define SYSCON_PIOSCSTAT_CT_MASK (0x7f << SYSCON_PIOSCSTAT_CT_SHIFT)
#define SYSCON_PIOSCSTAT_RESULT_SHIFT (8) /* Bits 8-9: Calibration Result */
#define SYSCON_PIOSCSTAT_RESULT_MASK (3 << SYSCON_PIOSCSTAT_RESULT_SHIFT)
#define SYSCON_PIOSCSTAT_DT_SHIFT (16) /* Bits 16-22: Default Trim Value */
#define SYSCON_PIOSCSTAT_DT_MASK (0x7f << SYSCON_PIOSCSTAT_DT_SHIFT)
/* PLL0 Frequency */
#define SYSCON_PLLFREQ0_MINT_SHIFT (0) /* Bits 0-9: PLL M Integer Value */
#define SYSCON_PLLFREQ0_MINT_MASK (0x3ff << SYSCON_PLLFREQ0_MINT_SHIFT)
#define SYSCON_PLLFREQ0_MFRAC_SHIFT (10) /* Bits 10-19: PLL M Fractional Value */
#define SYSCON_PLLFREQ0_MFRAC_MASK (0x3ff << SYSCON_PLLFREQ0_MFRAC_SHIFT)
/* PLL1 Frequency */
#define SYSCON_PLLFREQ1_N_SHIFT (0) /* Bits 0-4: PLL N Value */
#define SYSCON_PLLFREQ1_N_MASK (31 << SYSCON_PLLFREQ1_N_SHIFT)
#define SYSCON_PLLFREQ1_Q_SHIFT (8) /* Bits 8-12: PLL Q Value */
#define SYSCON_PLLFREQ1_Q_MASK (31 << SYSCON_PLLFREQ1_Q_SHIFT)
/* PLL Status */
#define SYSCON_PLLSTAT_LOCK (1 << 0) /* Bit 0: PLL Lock */
/* Watchdog Timer Peripheral Present */
#define SYSCON_PPWD(n) (1 << (n)) /* Bit n: WDTn present */
# define SYSCON_PPWD_P0 (1 << 0) /* Bit 0: WDT0 present */
# define SYSCON_PPWD_P1 (1 << 1) /* Bit 1: WDT1 present */
/* 16/32-Bit Timer Peripheral Present */
#define SYSCON_PPTIMER(n) (1 << (n)) /* Bit n: 16/32-Bit General-Purpose Timer n Present */
# define SYSCON_PPTIMER_P0 (1 << 0) /* Bit 0: 16/32-Bit General-Purpose Timer 0 Present */
# define SYSCON_PPTIMER_P1 (1 << 1) /* Bit 1: 16/32-Bit General-Purpose Timer 0 Present */
# define SYSCON_PPTIMER_P2 (1 << 2) /* Bit 2: 16/32-Bit General-Purpose Timer 0 Present */
# define SYSCON_PPTIMER_P3 (1 << 3) /* Bit 3: 16/32-Bit General-Purpose Timer 0 Present */
# define SYSCON_PPTIMER_P4 (1 << 4) /* Bit 4: 16/32-Bit General-Purpose Timer 0 Present */
# define SYSCON_PPTIMER_P5 (1 << 5) /* Bit 5: 16/32-Bit General-Purpose Timer 0 Present */
/* GPIO Peripheral Present */
#define SYSCON_PPGPIO(n) (1 << (n)) /* Bit n: GPIO Port n Present */
# define SYSCON_PPGPIO_P0 (1 << 0) /* Bit 0: GPIO Port A Present */
# define SYSCON_PPGPIO_P1 (1 << 1) /* Bit 1: GPIO Port B Present */
# define SYSCON_PPGPIO_P2 (1 << 2) /* Bit 2: GPIO Port C Present */
# define SYSCON_PPGPIO_P3 (1 << 3) /* Bit 3: GPIO Port D Present */
# define SYSCON_PPGPIO_P4 (1 << 4) /* Bit 4: GPIO Port E Present */
# define SYSCON_PPGPIO_P5 (1 << 5) /* Bit 5: GPIO Port F Present */
# define SYSCON_PPGPIO_P6 (1 << 6) /* Bit 6: GPIO Port G Present */
# define SYSCON_PPGPIO_P7 (1 << 7) /* Bit 7: GPIO Port H Present */
# define SYSCON_PPGPIO_P8 (1 << 8) /* Bit 8: GPIO Port J Present */
# define SYSCON_PPGPIO_P9 (1 << 9) /* Bit 9: GPIO Port K Present */
# define SYSCON_PPGPIO_P10 (1 << 10) /* Bit 10: GPIO Port L Present */
# define SYSCON_PPGPIO_P11 (1 << 11) /* Bit 11: GPIO Port M Present */
# define SYSCON_PPGPIO_P12 (1 << 12) /* Bit 12: GPIO Port N Present */
# define SYSCON_PPGPIO_P13 (1 << 13) /* Bit 13: GPIO Port P Present */
# define SYSCON_PPGPIO_P14 (1 << 14) /* Bit 14: GPIO Port Q Present */
/* uDMA Peripheral Present */
#define SYSCON_PPDMA_P0 (1 << 0) /* Bit 0: μDMA Module Present */
/* Hibernation Peripheral Present */
#define SYSCON_PPHIB_P0 (1 << 0) /* Bit 0: Hibernation Module Present */
/* UART Present */
#define SYSCON_PPUART(n) (1 << (n)) /* Bit n: UART Module n Present */
# define SYSCON_PPUART_P0 (1 << 0) /* Bit 0: UART Module 0 Present */
# define SYSCON_PPUART_P1 (1 << 1) /* Bit 1: UART Module 1 Present */
# define SYSCON_PPUART_P2 (1 << 2) /* Bit 2: UART Module 2 Present */
# define SYSCON_PPUART_P3 (1 << 3) /* Bit 3: UART Module 3 Present */
# define SYSCON_PPUART_P4 (1 << 4) /* Bit 4: UART Module 4 Present */
# define SYSCON_PPUART_P5 (1 << 5) /* Bit 5: UART Module 5 Present */
# define SYSCON_PPUART_P6 (1 << 6) /* Bit 6: UART Module 6 Present */
# define SYSCON_PPUART_P7 (1 << 7) /* Bit 7: UART Module 7 Present */
/* SSI Peripheral Present */
#define SYSCON_PPSSI(n) (1 << (n)) /* Bit n: SSI Module n Present */
# define SYSCON_PPSSI_P0 (1 << 0) /* Bit 0: SSI Module 0 Present */
# define SYSCON_PPSSI_P1 (1 << 1) /* Bit 1: SSI Module 1 Present */
# define SYSCON_PPSSI_P2 (1 << 2) /* Bit 2: SSI Module 2 Present */
# define SYSCON_PPSSI_P3 (1 << 3) /* Bit 3: SSI Module 3 Present */
/* I2C Peripheral Present */
#define SYSCON_PPI2C(n) (1 << (n)) /* Bit n: I2C Module n Present */
# define SYSCON_PPI2C_P0 (1 << 0) /* Bit 0: I2C Module 0 Present */
# define SYSCON_PPI2C_P1 (1 << 1) /* Bit 1: I2C Module 1 Present */
# define SYSCON_PPI2C_P2 (1 << 2) /* Bit 2: I2C Module 2 Present */
# define SYSCON_PPI2C_P3 (1 << 3) /* Bit 3: I2C Module 3 Present */
# define SYSCON_PPI2C_P4 (1 << 4) /* Bit 4: I2C Module 4 Present */
# define SYSCON_PPI2C_P5 (1 << 5) /* Bit 5: I2C Module 5 Present */
/* USB Peripheral Present */
#define SYSCON_PPUSB_P0 (1 << 0) /* USB Module Present */
/* CAN Peripheral Present */
#define SYSCON_PPCAN(n) (1 << (n)) /* Bit n: CAN Module n Present */
# define SYSCON_PPCAN_P0 (1 << 0) /* Bit 0: CAN Module 0 Present */
# define SYSCON_PPCAN_P1 (1 << 1) /* Bit 1: CAN Module 1 Present */
/* ADC Peripheral Present */
#define SYSCON_PPADC(n) (1 << (n)) /* Bit n: ADC Module n Present */
# define SYSCON_PPADC_P0 (1 << 0) /* Bit 0: ADC Module 0 Present */
# define SYSCON_PPADC_P1 (1 << 1) /* Bit 1: ADC Module 1 Present */
/* Analog Comparator Peripheral Present */
#define SYSCON_PPACMP_P0 (1 << 0) /* Bit 0: Analog Comparator Module Present */
/* Pulse Width Modulator Peripheral Present */
#define SYSCON_PPWM(n) (1 << (n)) /* Bit n: PWM Module n Present */
# define SYSCON_PPWM_P0 (1 << 0) /* Bit 0: PWM Module 0 Present */
# define SYSCON_PPWM_P1 (1 << 1) /* Bit 1: PWM Module 1 Present */
/* Quadrature Encoder Peripheral Present */
#define SYSCON_PPQEI(n) (1 << (n)) /* Bit n: QEI Module n Present */
# define SYSCON_PPQEI_P0 (1 << 0) /* Bit 0: QEI Module 0 Present */
# define SYSCON_PPUART_P1 (1 << 1) /* Bit 1: QEI Module 1 Present */
/* EEPROM Peripheral Present */
#define SYSCON_PPEEPROM_P0 (1 << 0) /* Bit 0: EEPROM Module Present */
/* 32/64-Bit Wide Timer Peripheral Present */
#define SYSCON_PPWTIMER(n) (1 << (n)) /* Bit n: 32/64-Bit Wide General-Purpose Timer n Present */
# define SYSCON_PPWTIMER_P0 (1 << 0) /* Bit 0: 32/64-Bit Wide General-Purpose Timer 0 Present */
# define SYSCON_PPWTIMER_P1 (1 << 1) /* Bit 1: 32/64-Bit Wide General-Purpose Timer 1 Present */
# define SYSCON_PPWTIMER_P2 (1 << 2) /* Bit 2: 32/64-Bit Wide General-Purpose Timer 2 Present */
# define SYSCON_PPWTIMER_P3 (1 << 3) /* Bit 3: 32/64-Bit Wide General-Purpose Timer 3 Present */
# define SYSCON_PPWTIMER_P4 (1 << 4) /* Bit 4: 32/64-Bit Wide General-Purpose Timer 4 Present */
# define SYSCON_PPWTIMER_P5 (1 << 5) /* Bit 5: 32/64-Bit Wide General-Purpose Timer 5 Present */
/* Watchdog Timer Software Reset */
#define SYSCON_SPWD(n) (1 << (n)) /* Bit n: Watchdog Timer n Software Reset */
# define SYSCON_SPWD_R0 (1 << 0) /* Bit 0: Watchdog Timer 0 Software Reset */
# define SYSCON_SPWD_R1 (1 << 1) /* Bit 1: Watchdog Timer 1 Software Reset */
/* 16/32-Bit Timer Software Reset */
#define SYSCON_SRTIMER(n) (1 << (n)) /* Bit n: 16/32-Bit General-Purpose Timer n Software Reset */
# define SYSCON_SRTIMER_R0 (1 << 0) /* Bit 0: 16/32-Bit General-Purpose Timer 0 Software Reset */
# define SYSCON_SRTIMER_R1 (1 << 1) /* Bit 1: 16/32-Bit General-Purpose Timer 1 Software Reset */
# define SYSCON_SRTIMER_R2 (1 << 2) /* Bit 2: 16/32-Bit General-Purpose Timer 2 Software Reset */
# define SYSCON_SRTIMER_R3 (1 << 3) /* Bit 3: 16/32-Bit General-Purpose Timer 3 Software Reset */
# define SYSCON_SRTIMER_R4 (1 << 4) /* Bit 4: 16/32-Bit General-Purpose Timer 4 Software Reset */
# define SYSCON_SRTIMER_R5 (1 << 5) /* Bit 5: 16/32-Bit General-Purpose Timer 5 Software Reset */
/* GPIO Software Reset */
#define SYSCON_SRGPIO(n) (1 << (n)) /* Bit n: GPIO Port n Software Reset */
# define SYSCON_SRGPIO_R0 (1 << 0) /* Bit 0: GPIO Port A Software Reset */
# define SYSCON_SRGPIO_R1 (1 << 1) /* Bit 1: GPIO Port B Software Reset */
# define SYSCON_SRGPIO_R2 (1 << 2) /* Bit 2: GPIO Port C Software Reset */
# define SYSCON_SRGPIO_R3 (1 << 3) /* Bit 3: GPIO Port D Software Reset */
# define SYSCON_SRGPIO_R4 (1 << 4) /* Bit 4: GPIO Port E Software Reset */
# define SYSCON_SRPGIO_R5 (1 << 5) /* Bit 5: GPIO Port F Software Reset */
/* uDMA Software Reset */
#define SYSCON_SRDMA_R0 (1 << 0) /* Bit 0: μDMA Module Software Reset */
/* Hibernation Software Reset */
#define SYSCON_SRHIB_R0 (1 << 0) /* Bit 0: Hibernation Module Software Reset */
/* UART Software Reset*/
#define SYSCON_SRUARTR(n) (1 << (n)) /* Bit n: UART Module n Software Reset */
# define SYSCON_SRUARTR_R0 (1 << 0) /* Bit 0: UART Module 0 Software Reset */
# define SYSCON_SRUARTR_R1 (1 << 1) /* Bit 1: UART Module 1 Software Reset */
# define SYSCON_SRUARTR_R2 (1 << 2) /* Bit 2: UART Module 2 Software Reset */
# define SYSCON_SRUARTR_R3 (1 << 3) /* Bit 3: UART Module 3 Software Reset */
# define SYSCON_SRUARTR_R4 (1 << 4) /* Bit 4: UART Module 4 Software Reset */
# define SYSCON_SRUARTR_R5 (1 << 5) /* Bit 5: UART Module 5 Software Reset */
# define SYSCON_SRUARTR_R6 (1 << 6) /* Bit 6: UART Module 6 Software Reset */
# define SYSCON_SRUARTR_R7 (1 << 7) /* Bit 7: UART Module 7 Software Reset */
/* SSI Software Reset */
#define SYSCON_SRSSI(n) (1 << (n)) /* Bit n: SSI Module n Software Reset */
# define SYSCON_SRSSI_R0 (1 << 0) /* Bit 0: SSI Module 0 Software Reset */
# define SYSCON_SRSSI_R1 (1 << 1) /* Bit 1: SSI Module 1 Software Reset */
# define SYSCON_SRSSI_R2 (1 << 2) /* Bit 2: SSI Module 2 Software Reset */
# define SYSCON_SRSSI_R3 (1 << 3) /* Bit 3: SSI Module 3 Software Reset */
/* I2C Software Reset */
#define SYSCON_SRI2C(n) (1 << (n)) /* Bit n: I2C Module n Software Reset */
# define SYSCON_SRI2C_R0 (1 << 0) /* Bit 0: I2C Module 0 Software Reset */
# define SYSCON_SRI2C_R1 (1 << 1) /* Bit 1: I2C Module 1 Software Reset */
# define SYSCON_SRI2C_R2 (1 << 2) /* Bit 2: I2C Module 2 Software Reset */
# define SYSCON_SRI2C_R3 (1 << 3) /* Bit 3: I2C Module 3 Software Reset */
/* USB Software Reset */
#define SYSCON_SRUSB_R0 (1 << 0) /* Bit 0: USB Module Software Reset */
/* CAN Software Reset */
#define SYSCON_SRCAN_R0 (1 << 0) /* Bit 0: CAN Module 0 Software Reset */
/* ADC Software Reset */
#define SYSCON_SRADC(n) (1 << (n)) /* Bit n: ADC Module n Software Reset */
# define SYSCON_SRADC_R0 (1 << 0) /* Bit 0: ADC Module 0 Software Reset */
# define SYSCON_SRADC_R1 (1 << 1) /* Bit 1: ADC Module 1 Software Reset */
/* Analog Comparator Software Reset */
#define SYSCON_SRACMP_R0 (1 << 0) /* Bit 0: Analog Comparator Module 0 Software Reset */
/* EEPROM Software Reset */
#define SYSCON_SREEPROM_R0 (1 << 0) /* Bit 0: EEPROM Module Software Reset */
/* 32/64-Bit Wide Timer Software Reset */
#define SYSCON_SRWTIMER(n) (1 << (n)) /* Bit n: 32/64-Bit Wide General-Purpose Timer n Software Reset */
# define SYSCON_SRWTIMER_R0 (1 << 0) /* Bit 0: 32/64-Bit Wide General-Purpose Timer 0 Software Reset */
# define SYSCON_SRWTIMER_R1 (1 << 1) /* Bit 1: 32/64-Bit Wide General-Purpose Timer 1 Software Reset */
# define SYSCON_SRWTIMER_R2 (1 << 2) /* Bit 2: 32/64-Bit Wide General-Purpose Timer 2 Software Reset */
# define SYSCON_SRWTIMER_R3 (1 << 3) /* Bit 3: 32/64-Bit Wide General-Purpose Timer 3 Software Reset */
# define SYSCON_SRWTIMER_R4 (1 << 4) /* Bit 4: 32/64-Bit Wide General-Purpose Timer 4 Software Reset */
# define SYSCON_SRWTIMER_R5 (1 << 5) /* Bit 5: 32/64-Bit Wide General-Purpose Timer 5 Software Reset */
# define SYSCON_SRWTIMER_R6 (1 << 6) /* Bit 6: 32/64-Bit Wide General-Purpose Timer 6 Software Reset */
/* Watchdog Timer Run Mode Clock Gating Control */
#define SYSCON_RCGCWD(n) (1 << (n)) /* Bit n: Watchdog Timer n Run Mode Clock Gating Control */
# define SYSCON_RCGCWD_R0 (1 << 0) /* Bit 0: Watchdog Timer 0 Run Mode Clock Gating Control */
# define SYSCON_RCGCWD_R1 (1 << 1) /* Bit 1: Watchdog Timer 1 Run Mode Clock Gating Control */
/* 16/32-Bit Timer Run Mode Clock Gating Control */
#define SYSCON_RCGCTIMER(n) (1 << (n)) /* Bit n: 16/32-Bit General-Purpose Timer n Run Mode Clock Gating Control */
# define SYSCON_RCGCTIMER_R0 (1 << 0) /* Bit 0: 16/32-Bit General-Purpose Timer 0 Run Mode Clock Gating Control */
# define SYSCON_RCGCTIMER_R1 (1 << 1) /* Bit 1: 16/32-Bit General-Purpose Timer 1 Run Mode Clock Gating Control */
# define SYSCON_RCGCTIMER_R2 (1 << 2) /* Bit 2: 16/32-Bit General-Purpose Timer 2 Run Mode Clock Gating Control */
# define SYSCON_RCGCTIMER_R3 (1 << 3) /* Bit 3: 16/32-Bit General-Purpose Timer 3 Run Mode Clock Gating Control */
# define SYSCON_RCGCTIMER_R4 (1 << 4) /* Bit 4: 16/32-Bit General-Purpose Timer 4 Run Mode Clock Gating Control */
# define SYSCON_RCGCTIMER_R5 (1 << 5) /* Bit 5: 16/32-Bit General-Purpose Timer 5 Run Mode Clock Gating Control */
/* GPIO Run Mode Clock Gating Control*/
#define SYSCON_RCGCGPIO(n) (1 << (n)) /* Bit n: 16/32-Bit GPIO Port n Run Mode Clock Gating Control */
# define SYSCON_RCGCGPIO_R0 (1 << 0) /* Bit 0: 16/32-Bit GPIO Port A Run Mode Clock Gating Control */
# define SYSCON_RCGCGPIO_R1 (1 << 1) /* Bit 1: 16/32-Bit GPIO Port B Run Mode Clock Gating Control */
# define SYSCON_RCGCGPIO_R2 (1 << 2) /* Bit 2: 16/32-Bit GPIO Port C Run Mode Clock Gating Control */
# define SYSCON_RCGCGPIO_R3 (1 << 3) /* Bit 3: 16/32-Bit GPIO Port D Run Mode Clock Gating Control */
# define SYSCON_RCGCGPIO_R4 (1 << 4) /* Bit 4: 16/32-Bit GPIO Port E Run Mode Clock Gating Control */
# define SYSCON_RCGCGPIO_R5 (1 << 5) /* Bit 5: 16/32-Bit GPIO Port F Run Mode Clock Gating Control */
/* uDMA Run Mode Clock Gating Control*/
#define SYSCON_RCGCDMA_R0 (1 << 0) /* Bit 0: μDMA Module Run Mode Clock Gating Control */
/* Hibernation Run Mode Clock Gating Control */
#define SYSCON_RCGCHIB_R0 (1 << 0) /* Bit 0: Hibernation Module Run Mode Clock Gating Control */
/* UART Run Mode Clock Gating Control*/
#define SYSCON_RCGCUART(n) (1 << (n)) /* Bit n: UART Module n Run Mode Clock Gating Control */
# define SYSCON_RCGCUART_R0 (1 << 0) /* Bit 0: UART Module 0 Run Mode Clock Gating Control */
# define SYSCON_RCGCUART_R1 (1 << 1) /* Bit 1: UART Module 1 Run Mode Clock Gating Control */
# define SYSCON_RCGCUART_R2 (1 << 2) /* Bit 2: UART Module 2 Run Mode Clock Gating Control */
# define SYSCON_RCGCUART_R3 (1 << 3) /* Bit 3: UART Module 3 Run Mode Clock Gating Control */
# define SYSCON_RCGCUART_R4 (1 << 4) /* Bit 4: UART Module 4 Run Mode Clock Gating Control */
# define SYSCON_RCGCUART_R5 (1 << 5) /* Bit 5: UART Module 5 Run Mode Clock Gating Control */
# define SYSCON_RCGCUART_R6 (1 << 6) /* Bit 6: UART Module 6 Run Mode Clock Gating Control */
# define SYSCON_RCGCUART_R7 (1 << 7) /* Bit 7: UART Module 7 Run Mode Clock Gating Control */
/* SSI Run Mode Clock Gating Control*/
#define SYSCON_RCGCSSI(n) (1 << (n)) /* Bit n: SSI Module n Run Mode Clock Gating Control */
# define SYSCON_RCGCSSI_R0 (1 << 0) /* Bit 0: SSI Module 0 Run Mode Clock Gating Control */
# define SYSCON_RCGCSSI_R1 (1 << 1) /* Bit 1: SSI Module 1 Run Mode Clock Gating Control */
# define SYSCON_RCGCSSI_R2 (1 << 2) /* Bit 2: SSI Module 2 Run Mode Clock Gating Control */
# define SYSCON_RCGCSSI_R3 (1 << 3) /* Bit 3: SSI Module 3 Run Mode Clock Gating Control */
/* I2C Run Mode Clock Gating Control */
#define SYSCON_RCGCI2C(n) (1 << (n)) /* Bit n: I2C Module n Run Mode Clock Gating Control */
# define SYSCON_RCGCI2C_R0 (1 << 0) /* Bit 0: I2C Module 0 Run Mode Clock Gating Control */
# define SYSCON_RCGCI2C_R1 (1 << 1) /* Bit 1: I2C Module 1 Run Mode Clock Gating Control */
# define SYSCON_RCGCI2C_R2 (1 << 2) /* Bit 2: I2C Module 2 Run Mode Clock Gating Control */
# define SYSCON_RCGCI2C_R3 (1 << 3) /* Bit 3: I2C Module 3 Run Mode Clock Gating Control */
/* USB Run Mode Clock Gating Control */
#define SYSCON_RCGCUSB_R0 (1 << 0) /* Bit 0: USB Module Run Mode Clock Gating Control */
/* CAN Run Mode Clock Gating Control */
#define SYSCON_RCGCCAN_R0 (1 << 0) /* Bit 0: CAN Module 0 Run Mode Clock Gating Control */
/* ADC Run Mode Clock Gating Control */
#define SYSCON_RCGCADC(n) (1 << (n)) /* Bit n: ADC Module n Run Mode Clock Gating Control */
# define SYSCON_RCGCADC_R0 (1 << 0) /* Bit 0: ADC Module 0 Run Mode Clock Gating Control */
# define SYSCON_RCGCADC_R1 (1 << 1) /* Bit 1: ADC Module 1 Run Mode Clock Gating Control */
/* Analog Comparator Run Mode Clock Gating Control */
#define SYSCON_RCGCACMP_R0 (1 << 0) /* Bit 0: Analog Comparator Module 0 Run Mode Clock Gating Control */
/* EEPROM Run Mode Clock Gating Control */
#define SYSCON_RCGCEEPROM_R0 (1 << 0) /* Bit 0: EEPROM Module Run Mode Clock Gating Control */
/* 32/64-BitWide Timer Run Mode Clock Gating Control */
#define SYSCON_RCGCWTIMER(n) (1 << (n)) /* Bit n: 32/64-Bit Wide General-Purpose Timer n Run Mode Clock Gating Control */
# define SYSCON_RCGCWTIMER_R0 (1 << 0) /* Bit 0: 32/64-Bit Wide General-Purpose Timer 0 Run Mode Clock Gating Control */
# define SYSCON_RCGCWTIMER_R1 (1 << 1) /* Bit 1: 32/64-Bit Wide General-Purpose Timer 1 Run Mode Clock Gating Control */
# define SYSCON_RCGCWTIMER_R2 (1 << 2) /* Bit 2: 32/64-Bit Wide General-Purpose Timer 2 Run Mode Clock Gating Control */
# define SYSCON_RCGCWTIMER_R3 (1 << 3) /* Bit 3: 32/64-Bit Wide General-Purpose Timer 3 Run Mode Clock Gating Control */
# define SYSCON_RCGCWTIMER_R4 (1 << 4) /* Bit 4: 32/64-Bit Wide General-Purpose Timer 4 Run Mode Clock Gating Control */
# define SYSCON_RCGCWTIMER_R5 (1 << 5) /* Bit 5: 32/64-Bit Wide General-Purpose Timer 5 Run Mode Clock Gating Control */
/* Watchdog Timer Sleep Mode Clock Gating Control */
#define SYSCON_SCGCWD(n) (1 << (n)) /* Bit n: Watchdog Timer n Sleep Mode Clock Gating Control */
# define SYSCON_SCGCWD_S0 (1 << 0) /* Bit 0: Watchdog Timer 0 Sleep Mode Clock Gating Control */
# define SYSCON_SCGCWD_S1 (1 << 1) /* Bit 1: Watchdog Timer 1 Sleep Mode Clock Gating Control */
/* 16/32-Bit Timer Sleep Mode Clock Gating Control */
#define SYSCON_SCGCWD(n) (1 << (n)) /* Bit n: 16/32-Bit General-Purpose Timer n Sleep Mode Clock Gating Control */
# define SYSCON_SCGCWD_S0 (1 << 0) /* Bit 0: 16/32-Bit General-Purpose Timer 0 Sleep Mode Clock Gating Control */
# define SYSCON_SCGCWD_S1 (1 << 1) /* Bit 1: 16/32-Bit General-Purpose Timer 1 Sleep Mode Clock Gating Control */
# define SYSCON_SCGCWD_S2 (1 << 2) /* Bit 2: 16/32-Bit General-Purpose Timer 2 Sleep Mode Clock Gating Control */
# define SYSCON_SCGCWD_S3 (1 << 3) /* Bit 3: 16/32-Bit General-Purpose Timer 3 Sleep Mode Clock Gating Control */
# define SYSCON_SCGCWD_S4 (1 << 4) /* Bit 4: 16/32-Bit General-Purpose Timer 4 Sleep Mode Clock Gating Control */
# define SYSCON_SCGCWD_S5 (1 << 5) /* Bit 5: 16/32-Bit General-Purpose Timer 5 Sleep Mode Clock Gating Control */
/* GPIO Sleep Mode Clock Gating Control */
#define SYSCON_SCGCGPIO(n) (1 << (n)) /* Bit n: GPIO Port n Sleep Mode Clock Gating Control */
# define SYSCON_SCGCGPIO_S0 (1 << 0) /* Bit 0: GPIO Port A Sleep Mode Clock Gating Control */
# define SYSCON_SCGCGPIO_S1 (1 << 1) /* Bit 1: GPIO Port B Sleep Mode Clock Gating Control */
# define SYSCON_SCGCGPIO_S2 (1 << 2) /* Bit 2: GPIO Port C Sleep Mode Clock Gating Control */
# define SYSCON_SCGCGPIO_S3 (1 << 3) /* Bit 3: GPIO Port D Sleep Mode Clock Gating Control */
# define SYSCON_SCGCGPIO_S4 (1 << 4) /* Bit 4: GPIO Port E Sleep Mode Clock Gating Control */
# define SYSCON_SCGCGPIO_S5 (1 << 5) /* Bit 5: GPIO Port F Sleep Mode Clock Gating Control */
/* uDMA Sleep Mode Clock Gating Control */
#define SYSCON_SCGCDMA_S0 (1 << 0) /* Bit 0: μDMA Module Sleep Mode Clock Gating Control */
/* Hibernation Sleep Mode Clock Gating Control */
#define SYSCON_SCGCHIB_S0 (1 << 0) /* Bit 0: Hibernation Module Sleep Mode Clock Gating Control */
/* UART Sleep Mode Clock Gating Control */
#define SYSCON_SCGCUART(n) (1 << (n)) /* Bit n: UART Module n Sleep Mode Clock Gating Control */
# define SYSCON_SCGCUART_S0 (1 << 0) /* Bit 0: UART Module 0 Sleep Mode Clock Gating Control */
# define SYSCON_SCGCUART_S1 (1 << 1) /* Bit 1: UART Module 1 Sleep Mode Clock Gating Control */
# define SYSCON_SCGCUART_S2 (1 << 2) /* Bit 2: UART Module 2 Sleep Mode Clock Gating Control */
# define SYSCON_SCGCUART_S3 (1 << 3) /* Bit 3: UART Module 3 Sleep Mode Clock Gating Control */
# define SYSCON_SCGCUART_S4 (1 << 4) /* Bit 4: UART Module 4 Sleep Mode Clock Gating Control */
# define SYSCON_SCGCUART_S5 (1 << 5) /* Bit 5: UART Module 5 Sleep Mode Clock Gating Control */
# define SYSCON_SCGCUART_S6 (1 << 6) /* Bit 6: UART Module 6 Sleep Mode Clock Gating Control */
# define SYSCON_SCGCUART_S7 (1 << 7) /* Bit 7: UART Module 7 Sleep Mode Clock Gating Control */
/* SSI Sleep Mode Clock Gating Control */
#define SYSCON_SCGCSSI(n) (1 << (n)) /* Bit n: SSI Module n Sleep Mode Clock Gating Control */
# define SYSCON_SCGCSSI_S0 (1 << 0) /* Bit 0: SSI Module 0 Sleep Mode Clock Gating Control */
# define SYSCON_SCGCSSI_S1 (1 << 1) /* Bit 1: SSI Module 1 Sleep Mode Clock Gating Control */
# define SYSCON_SCGCSSI_S2 (1 << 2) /* Bit 2: SSI Module 2 Sleep Mode Clock Gating Control */
# define SYSCON_SCGCSSI_S3 (1 << 3) /* Bit 3: SSI Module 3 Sleep Mode Clock Gating Control */
/* I2C Sleep Mode Clock Gating Control */
#define SYSCON_SCGCI2C(n) (1 << (n)) /* Bit n: I2C Module n Sleep Mode Clock Gating Control */
# define SYSCON_SCGCI2C_S0 (1 << 0) /* Bit 0: I2C Module 0 Sleep Mode Clock Gating Control */
# define SYSCON_SCGCI2C_S1 (1 << 1) /* Bit 1: I2C Module 1 Sleep Mode Clock Gating Control */
# define SYSCON_SCGCI2C_S2 (1 << 2) /* Bit 2: I2C Module 2 Sleep Mode Clock Gating Control */
# define SYSCON_SCGCI2C_S3 (1 << 3) /* Bit 3: I2C Module 3 Sleep Mode Clock Gating Control */
/* USB Sleep Mode Clock Gating Control */
#define SYSCON_SCGCUSB_S0 (1 << 0) /* Bit 0: USB Module Sleep Mode Clock Gating Control */
/* CAN Sleep Mode Clock Gating Control */
#define SYSCON_SCGCCAN_S0 (1 << 0) /* Bit 0: CAN Module 0 Sleep Mode Clock Gating Control */
/* ADC Sleep Mode Clock Gating Control */
#define SYSCON_SCGCADC(n) (1 << (n)) /* Bit n: ADC Module n Sleep Mode Clock Gating Control */
# define SYSCON_SCGCADC_S0 (1 << 0) /* Bit 0: ADC Module 0 Sleep Mode Clock Gating Control */
# define SYSCON_SCGCADC_S1 (1 << 1) /* Bit 1: ADC Module 1 Sleep Mode Clock Gating Control */
/* Analog Comparator Sleep Mode Clock Gating Control */
#define SYSCON_SCGCACMP_S0 (1 << 0) /* Bit 0: Analog Comparator Module 0 Sleep Mode Clock Gating Control */
/* EEPROM Sleep Mode Clock Gating Control */
#define SYSCON_SCGCEEPROM_S0 (1 << 0) /* Bit 0: EEPROM Module Sleep Mode Clock Gating Control */
/* 32/64-BitWide Timer Sleep Mode Clock Gating Control */
#define SYSCON_SCGCWTIMER(n) (1 << (n)) /* Bit n: 32/64-Bit Wide General-Purpose Timer n Sleep Mode Clock Gating Control */
# define SYSCON_SCGCWTIMER_S0 (1 << 0) /* Bit 0: 32/64-Bit Wide General-Purpose Timer 0 Sleep Mode Clock Gating Control */
# define SYSCON_SCGCWTIMER_S1 (1 << 1) /* Bit 1: 32/64-Bit Wide General-Purpose Timer 1 Sleep Mode Clock Gating Control */
# define SYSCON_SCGCWTIMER_S2 (1 << 2) /* Bit 2: 32/64-Bit Wide General-Purpose Timer 2 Sleep Mode Clock Gating Control */
# define SYSCON_SCGCWTIMER_S3 (1 << 3) /* Bit 3: 32/64-Bit Wide General-Purpose Timer 3 Sleep Mode Clock Gating Control */
# define SYSCON_SCGCWTIMER_S4 (1 << 4) /* Bit 4: 32/64-Bit Wide General-Purpose Timer 4 Sleep Mode Clock Gating Control */
# define SYSCON_SCGCWTIMER_S5 (1 << 5) /* Bit 5: 32/64-Bit Wide General-Purpose Timer 5 Sleep Mode Clock Gating Control */
/* Watchdog Timer Deep-Sleep Mode Clock Gating Control */
#define SYSCON_DCGCWD(n) (1 << (n)) /* Bit n: Watchdog Timer n Deep-Sleep Mode Clock Gating Control */
# define SYSCON_DCGCWD_D0 (1 << 0) /* Bit 0: Watchdog Timer 0 Deep-Sleep Mode Clock Gating Control */
# define SYSCON_DCGCWD_D1 (1 << 1) /* Bit 1: Watchdog Timer 1 Deep-Sleep Mode Clock Gating Control */
/* Clock Gating Control */
#define SYSCON_DCGCTIMER(n) (1 << (n)) /* Bit n: 16/32-Bit General-Purpose Timer n Deep-Sleep Mode Clock Gating Control */
# define SYSCON_DCGCTIMER_D0 (1 << 0) /* Bit 0: 16/32-Bit General-Purpose Timer 0 Deep-Sleep Mode Clock Gating Control */
# define SYSCON_DCGCTIMER_D1 (1 << 1) /* Bit 1: 16/32-Bit General-Purpose Timer 1 Deep-Sleep Mode Clock Gating Control */
# define SYSCON_DCGCTIMER_D2 (1 << 2) /* Bit 2: 16/32-Bit General-Purpose Timer 2 Deep-Sleep Mode Clock Gating Control */
# define SYSCON_DCGCTIMER_D3 (1 << 3) /* Bit 3: 16/32-Bit General-Purpose Timer 3 Deep-Sleep Mode Clock Gating Control */
# define SYSCON_DCGCTIMER_D4 (1 << 4) /* Bit 4: 16/32-Bit General-Purpose Timer 4 Deep-Sleep Mode Clock Gating Control */
# define SYSCON_DCGCTIMER_D5 (1 << 5) /* Bit 5: 16/32-Bit General-Purpose Timer 5 Deep-Sleep Mode Clock Gating Control */
/* GPIO Deep-Sleep Mode Clock Gating Control */
#define SYSCON_DCGCGPIO(n) (1 << (n)) /* Bit n: GPIO Port F Deep-Sleep Mode Clock Gating Control */
# define SYSCON_DCGCGPIO_D0 (1 << 0) /* Bit 0: GPIO Port A Deep-Sleep Mode Clock Gating Control */
# define SYSCON_DCGCGPIO_D1 (1 << 1) /* Bit 1: GPIO Port B Deep-Sleep Mode Clock Gating Control */
# define SYSCON_DCGCGPIO_D2 (1 << 2) /* Bit 2: GPIO Port C Deep-Sleep Mode Clock Gating Control */
# define SYSCON_DCGCGPIO_D3 (1 << 3) /* Bit 3: GPIO Port D Deep-Sleep Mode Clock Gating Control */
# define SYSCON_DCGCGPIO_D4 (1 << 4) /* Bit 4: GPIO Port E Deep-Sleep Mode Clock Gating Control */
# define SYSCON_DCGCGPIO_D5 (1 << 5) /* Bit 5: GPIO Port F Deep-Sleep Mode Clock Gating Control */
/* uDMA Deep-Sleep Mode Clock Gating Control */
#define SYSCON_DCGCDMA_D0 (1 << 0) /* Bit 0: μDMA Module Deep-Sleep Mode Clock Gating Control */
/* Hibernation Deep-Sleep Mode Clock Gating Control */
#define SYSCON_DCGCHIB_D0 (1 << 0) /* Bit 0: Hibernation Module Deep-Sleep Mode Clock Gating Control */
/* UART Deep-Sleep Mode Clock Gating Control */
#define SYSCON_DCGCUART(n) (1 << (n)) /* Bit n: UART Module n Deep-Sleep Mode Clock Gating Control */
# define SYSCON_DCGCUART_D0 (1 << 0) /* Bit 0: UART Module 0 Deep-Sleep Mode Clock Gating Control */
# define SYSCON_DCGCUART_D1 (1 << 1) /* Bit 1: UART Module 1 Deep-Sleep Mode Clock Gating Control */
# define SYSCON_DCGCUART_D2 (1 << 2) /* Bit 2: UART Module 2 Deep-Sleep Mode Clock Gating Control */
# define SYSCON_DCGCUART_D3 (1 << 3) /* Bit 3: UART Module 3 Deep-Sleep Mode Clock Gating Control */
# define SYSCON_DCGCUART_D4 (1 << 4) /* Bit 4: UART Module 4 Deep-Sleep Mode Clock Gating Control */
# define SYSCON_DCGCUART_D5 (1 << 5) /* Bit 5: UART Module 5 Deep-Sleep Mode Clock Gating Control */
# define SYSCON_DCGCUART_D6 (1 << 6) /* Bit 6: UART Module 6 Deep-Sleep Mode Clock Gating Control */
# define SYSCON_DCGCUART_D7 (1 << 7) /* Bit 7: UART Module 7 Deep-Sleep Mode Clock Gating Control */
/* SSI Deep-Sleep Mode Clock Gating Control */
#define SYSCON_DCGCSSI(n) (1 << (n)) /* Bit n: SSI Module n Deep-Sleep Mode Clock Gating Control */
# define SYSCON_DCGCSSI_D0 (1 << 0) /* Bit 0: SSI Module 0 Deep-Sleep Mode Clock Gating Control */
# define SYSCON_DCGCSSI_D1 (1 << 1) /* Bit 1: SSI Module 1 Deep-Sleep Mode Clock Gating Control */
# define SYSCON_DCGCSSI_D2 (1 << 2) /* Bit 2: SSI Module 2 Deep-Sleep Mode Clock Gating Control */
# define SYSCON_DCGCSSI_D3 (1 << 3) /* Bit 3: SSI Module 3 Deep-Sleep Mode Clock Gating Control */
/* I2C Deep-Sleep Mode Clock Gating Control */
#define SYSCON_DCGCI2C(n) (1 << (n)) /* Bit n: I2C Module n Deep-Sleep Mode Clock Gating Control */
# define SYSCON_DCGCI2C_D0 (1 << 0) /* Bit 0: I2C Module 0 Deep-Sleep Mode Clock Gating Control */
# define SYSCON_DCGCI2C_D1 (1 << 1) /* Bit 1: I2C Module 1 Deep-Sleep Mode Clock Gating Control */
# define SYSCON_DCGCI2C_D2 (1 << 2) /* Bit 2: I2C Module 2 Deep-Sleep Mode Clock Gating Control */
# define SYSCON_DCGCI2C_D3 (1 << 3) /* Bit 3: I2C Module 3 Deep-Sleep Mode Clock Gating Control */
/* USB Deep-Sleep Mode Clock Gating Control */
#define SYSCON_DCGCUSB_D0 (1 << 0) /* Bit 0: USB Module Deep-Sleep Mode Clock Gating Control */
/* CAN Deep-Sleep Mode Clock Gating Control */
#define SYSCON_DCGCCAN_D0 (1 << 0) /* Bit 0: CAN Module 0 Deep-Sleep Mode Clock Gating Control */
/* ADC Deep-Sleep Mode Clock Gating Control */
#define SYSCON_DCGCADC(n) (1 << (n)) /* Bit n: ADC Module n Deep-Sleep Mode Clock Gating Control */
# define SYSCON_DCGCADC_D0 (1 << 0) /* Bit 0: ADC Module 0 Deep-Sleep Mode Clock Gating Control */
# define SYSCON_DCGCADC_D1 (1 << 1) /* Bit 1: ADC Module 1 Deep-Sleep Mode Clock Gating Control */
/* Analog Comparator Deep-Sleep Mode Clock Gating Control */
#define SYSCON_DCGCACMP_D0 (1 << 0) /* Bit 0: Analog Comparator Module 0 Deep-Sleep Mode Clock Gating Control */
/* EEPROM Deep-Sleep Mode Clock Gating Control */
#define SYSCON_DCGCEEPROM_D0 (1 << 0) /* Bit 0: EEPROM Module Deep-Sleep Mode Clock Gating Control */
/* 32/64-BitWide Timer Deep-Sleep Mode Clock Gating Control */
#define SYSCON_DCGCWTIMER(n) (1 << (n)) /* Bit n: UART Module n Deep-Sleep Mode Clock Gating Control */
# define SYSCON_DCGCWTIMER_D0 (1 << 0) /* Bit 0: UART Module 0 Deep-Sleep Mode Clock Gating Control */
# define SYSCON_DCGCWTIMER_D1 (1 << 1) /* Bit 1: UART Module 1 Deep-Sleep Mode Clock Gating Control */
# define SYSCON_DCGCWTIMER_D2 (1 << 2) /* Bit 2: UART Module 2 Deep-Sleep Mode Clock Gating Control */
# define SYSCON_DCGCWTIMER_D3 (1 << 3) /* Bit 3: UART Module 3 Deep-Sleep Mode Clock Gating Control */
# define SYSCON_DCGCWTIMER_D4 (1 << 4) /* Bit 4: UART Module 4 Deep-Sleep Mode Clock Gating Control */
# define SYSCON_DCGCWTIMER_D5 (1 << 5) /* Bit 5: UART Module 5 Deep-Sleep Mode Clock Gating Control */
/* Watchdog Timer Peripheral Ready */
#define SYSCON_PRWD(n) (1 << (n)) /* Bit n: Watchdog Timer n Peripheral Ready */
# define SYSCON_PRWD_R0 (1 << 0) /* Bit 0: Watchdog Timer 0 Peripheral Ready */
# define SYSCON_PRWD_R1 (1 << 1) /* Bit 1: Watchdog Timer 1 Peripheral Ready */
/* 16/32-Bit Timer Peripheral Ready */
#define SYSCON_PRTIMER(n) (1 << (n)) /* Bit n: 16/32-Bit General-Purpose Timer n Peripheral Ready */
# define SYSCON_PRTIMER_R0 (1 << 0) /* Bit 0: 16/32-Bit General-Purpose Timer 0 Peripheral Ready */
# define SYSCON_PRTIMER_R1 (1 << 1) /* Bit 1: 16/32-Bit General-Purpose Timer 1 Peripheral Ready */
# define SYSCON_PRTIMER_R2 (1 << 2) /* Bit 2: 16/32-Bit General-Purpose Timer 2 Peripheral Ready */
# define SYSCON_PRTIMER_R3 (1 << 3) /* Bit 3: 16/32-Bit General-Purpose Timer 3 Peripheral Ready */
# define SYSCON_PRTIMER_R4 (1 << 4) /* Bit 4: 16/32-Bit General-Purpose Timer 4 Peripheral Ready */
# define SYSCON_PRTIMER_R5 (1 << 5) /* Bit 5: 16/32-Bit General-Purpose Timer 5 Peripheral Ready */
/* GPIO Peripheral Ready */
#define SYSCON_PRGPIO(n) (1 << (n)) /* Bit n: GPIO Port F Peripheral Ready */
# define SYSCON_PRGPIO_R0 (1 << 0) /* Bit 0: GPIO Port A Peripheral Ready */
# define SYSCON_PRGPIO_R1 (1 << 1) /* Bit 1: GPIO Port B Peripheral Ready */
# define SYSCON_PRGPIO_R2 (1 << 2) /* Bit 2: GPIO Port C Peripheral Ready */
# define SYSCON_PRGPIO_R3 (1 << 3) /* Bit 3: GPIO Port D Peripheral Ready */
# define SYSCON_PRGPIO_R4 (1 << 4) /* Bit 4: GPIO Port E Peripheral Ready */
# define SYSCON_PRGPIO_R5 (1 << 5) /* Bit 5: GPIO Port F Peripheral Ready */
/* uDMA Peripheral Ready */
#define SYSCON_PRDMA_R0 (1 << 0) /* Bit 0: μDMA Module Peripheral Ready */
/* Hibernation Peripheral Ready */
#define SYSCON_PRHIB_R0 (1 << 0) /* Bit 0: Hibernation Module Peripheral Ready */
/* UART Peripheral Ready */
#define SYSCON_PRUART(n) (1 << (n)) /* Bit n: UART Module n Peripheral Ready */
# define SYSCON_PRUART_R0 (1 << 0) /* Bit 0: UART Module 0 Peripheral Ready */
# define SYSCON_PRUART_R1 (1 << 1) /* Bit 1: UART Module 1 Peripheral Ready */
# define SYSCON_PRUART_R2 (1 << 2) /* Bit 2: UART Module 2 Peripheral Ready */
# define SYSCON_PRUART_R3 (1 << 3) /* Bit 3: UART Module 3 Peripheral Ready */
# define SYSCON_PRUART_R4 (1 << 4) /* Bit 4: UART Module 4 Peripheral Ready */
# define SYSCON_PRUART_R5 (1 << 5) /* Bit 5: UART Module 5 Peripheral Ready */
# define SYSCON_PRUART_R6 (1 << 6) /* Bit 6: UART Module 6 Peripheral Ready */
# define SYSCON_PRUART_R7 (1 << 7) /* Bit 7: UART Module 7 Peripheral Ready */
/* SSI Peripheral Ready */
#define SYSCON_PRSSI(n) (1 << (n)) /* Bit n: SSI Module n Peripheral Ready */
# define SYSCON_PRSSI_R0 (1 << 0) /* Bit 0: SSI Module 0 Peripheral Ready */
# define SYSCON_PRSSI_R1 (1 << 1) /* Bit 1: SSI Module 1 Peripheral Ready */
# define SYSCON_PRSSI_R2 (1 << 2) /* Bit 2: SSI Module 2 Peripheral Ready */
# define SYSCON_PRSSI_R3 (1 << 3) /* Bit 3: SSI Module 3 Peripheral Ready */
/* I2C Peripheral Ready */
#define SYSCON_PRI2C(n) (1 << (n)) /* Bit n: I2C Module n Peripheral Ready */
# define SYSCON_PRI2C_R0 (1 << 0) /* Bit 0: I2C Module 0 Peripheral Ready */
# define SYSCON_PRI2C_R1 (1 << 1) /* Bit 1: I2C Module 1 Peripheral Ready */
# define SYSCON_PRI2C_R2 (1 << 2) /* Bit 2: I2C Module 2 Peripheral Ready */
# define SYSCON_PRI2C_R3 (1 << 3) /* Bit 3: I2C Module 3 Peripheral Ready */
/* USB Peripheral Ready */
#define SYSCON_PRUSB_R0 (1 << 0) /* Bit 0: USB Module Peripheral Ready */
/* CAN Peripheral Ready */
#define SYSCON_PRCAN_R0 (1 << 0) /* Bit 0: CAN Module 0 Peripheral Ready */
/* ADC Peripheral Ready */
#define SYSCON_PRADC(n) (1 << (n)) /* Bit n: ADC Module n Peripheral Ready */
# define SYSCON_PRADC_R0 (1 << 0) /* Bit 0: ADC Module 0 Peripheral Ready */
# define SYSCON_PRADC_R1 (1 << 1) /* Bit 1: ADC Module 1 Peripheral Ready */
/* Analog Comparator Peripheral Ready */
#define SYSCON_PRACMP_R0 (1 << 0) /* Bit 0: Analog Comparator Module 0 Peripheral Ready */
/* EEPROM Peripheral Ready */
#define SYSCON_PREEPROM_0 (1 << 0) /* Bit 0: EEPROM Module Peripheral Ready */
/* 2/64-BitWide Timer Peripheral Ready */
#define SYSCON_PRWTIMER(n) (1 << (n)) /* Bit n: 32/64-Bit Wide General-Purpose Timer n Peripheral Ready */
# define SYSCON_PRWTIMER_R0 (1 << 0) /* Bit 0: 32/64-Bit Wide General-Purpose Timer 0 Peripheral Ready */
# define SYSCON_PRWTIMER_R1 (1 << 1) /* Bit 1: 32/64-Bit Wide General-Purpose Timer 1 Peripheral Ready */
# define SYSCON_PRWTIMER_R2 (1 << 2) /* Bit 2: 32/64-Bit Wide General-Purpose Timer 2 Peripheral Ready */
# define SYSCON_PRWTIMER_R3 (1 << 3) /* Bit 3: 32/64-Bit Wide General-Purpose Timer 3 Peripheral Ready */
# define SYSCON_PRWTIMER_R4 (1 << 4) /* Bit 4: 32/64-Bit Wide General-Purpose Timer 4 Peripheral Ready */
# define SYSCON_PRWTIMER_R5 (1 << 5) /* Bit 5: 32/64-Bit Wide General-Purpose Timer 5 Peripheral Ready */
/* System Control Legacy Register Bit Definitions *******************************************/
/* Device Capabilities 0 */
#define SYSCON_DC0_FLASHSZ_SHIFT 0 /* Bits 15-0: FLASH Size */
#define SYSCON_DC0_FLASHSZ_MASK (0xffff << SYSCON_DC0_FLASHSZ_SHIFT)
#define SYSCON_DC0_SRAMSZ_SHIFT 16 /* Bits 31-16: SRAM Size */
#define SYSCON_DC0_SRAMSZ_MASK (0xffff << SYSCON_DC0_SRAMSZ_SHIFT)
/* Device Capabilities 1 */
#define SYSCON_DC1_JTAG (1 << 0) /* Bit 0: JTAG Present */
#define SYSCON_DC1_SWD (1 << 1) /* Bit 1: SWD Present */
#define SYSCON_DC1_SWO (1 << 2) /* Bit 2: SWO Trace Port Present */
#define SYSCON_DC1_WDT0 (1 << 3) /* Bit 3: Watchdog Timer 0 Present */
#define SYSCON_DC1_PLL (1 << 4) /* Bit 4: PLL Present */
#define SYSCON_DC1_TEMPSNS (1 << 5) /* Bit 5: Temp Sensor Present */
#define SYSCON_DC1_HIB (1 << 6) /* Bit 6: Hibernation Module Present */
#define SYSCON_DC1_MPU (1 << 7) /* Bit 7: MPU Present */
#define SYSCON_DC1_MAXADC0SPD_SHIFT (8) /* Bits 9-8: Max ADC Speed */
#define SYSCON_DC1_MAXADC0SPD_MASK (3 << SYSCON_DC1_MAXADC0SPD_SHIFT)
#define SYSCON_DC1_MAXADC1SPD_SHIFT (10) /* Bits 10-11: Max ADC Speed */
#define SYSCON_DC1_MAXADC1SPD_MASK (3 << SYSCON_DC1_MAXADC1SPD_SHIFT)
#define SYSCON_DC1_MINSYSDIV_SHIFT 12 /* Bits 12-15: System Clock Divider Minimum */
#define SYSCON_DC1_MINSYSDIV_MASK (15 << SYSCON_DC1_MINSYSDIV_SHIFT)
#define SYSCON_DC1_ADC0 (1 << 16) /* Bit 16: ADC0 Module Present */
#define SYSCON_DC1_ADC1 (1 << 17) /* Bit 17: ADC1 Module Present */
#define SYSCON_DC1_PWM0 (1 << 20) /* Bit 20: PWM0 Module Present */
#define SYSCON_DC1_PWM1 (1 << 21) /* Bit 21: PWM1 Module Present */
#define SYSCON_DC1_CAN0 (1 << 24) /* Bit 24: CAN0 Module Present */
#define SYSCON_DC1_CAN1 (1 << 25) /* Bit 25: CAN1 Module Present */
#define SYSCON_DC1_WDT1 (1 << 28) /* Bit 28: Watchdog Timer 1 Present */
/* Device Capabilities 2 */
#define SYSCON_DC2_UART0 (1 << 0) /* Bit 0: UART0 Module Present */
#define SYSCON_DC2_UART1 (1 << 1) /* Bit 1: UART1 Module Present */
#define SYSCON_DC2_UART2 (1 << 2) /* Bit 2: UART2 Module Present */
#define SYSCON_DC2_SSI0 (1 << 4) /* Bit 4: SSI0 Module Present */
#define SYSCON_DC2_SSI1 (1 << 5) /* Bit 5: SSI1 Module Present */
#define SYSCON_DC2_QEI0 (1 << 8) /* Bit 8: QEI0 Module Present */
#define SYSCON_DC2_QEI1 (1 << 9) /* Bit 9: QEI1 Module Present */
#define SYSCON_DC2_I2C0 (1 << 12) /* Bit 12: I2C Module 0 Present */
#define SYSCON_DC2_I2C0HS (1 << 13) /* Bit 13: I2C Module 0 Speed */
#define SYSCON_DC2_I2C1 (1 << 14) /* Bit 14: I2C Module 1 Present */
#define SYSCON_DC2_I2C1HS (1 << 15) /* Bit 15: I2C Module 1 Speed */
#define SYSCON_DC2_TIMER0 (1 << 16) /* Bit 16: Timer 0 Present */
#define SYSCON_DC2_TIMER1 (1 << 17) /* Bit 17: Timer 1 Present */
#define SYSCON_DC2_TIMER2 (1 << 18) /* Bit 18: Timer 2 Present */
#define SYSCON_DC2_TIMER3 (1 << 19) /* Bit 19: Timer 3 Present */
#define SYSCON_DC2_COMP0 (1 << 24) /* Bit 24: Analog Comparator 0 Present */
#define SYSCON_DC2_COMP1 (1 << 25) /* Bit 25: Analog Comparator 1 Present */
#define SYSCON_DC2_COMP2 (1 << 26) /* Bit 26: Analog Comparator 2 Present */
#define SYSCON_DC2_I2S0 (1 << 28) /* Bit 28: I2S Module 0 Present */
#define SYSCON_DC2_EPI0 (1 << 30) /* Bit 30: EPI Module 0 Present */
/* Device Capabilities 3 */
#define SYSCON_DC3_PWM0 (1 << 0) /* Bit 0: PWM0 Pin Present */
#define SYSCON_DC3_PWM1 (1 << 1) /* Bit 1: PWM1 Pin Present */
#define SYSCON_DC3_PWM2 (1 << 2) /* Bit 2: PWM2 Pin Present */
#define SYSCON_DC3_PWM3 (1 << 3) /* Bit 3: PWM3 Pin Present */
#define SYSCON_DC3_PWM4 (1 << 4) /* Bit 4: PWM4 Pin Present */
#define SYSCON_DC3_PWM5 (1 << 5) /* Bit 5: PWM5 Pin Present */
#define SYSCON_DC3_C0MINUS (1 << 6) /* Bit 6: C0- Pin Present */
#define SYSCON_DC3_C0PLUS (1 << 7) /* Bit 7: C0+ Pin Present */
#define SYSCON_DC3_C0O (1 << 8) /* Bit 8: C0o Pin Present */
#define SYSCON_DC3_C1MINUS (1 << 9) /* Bit 9: C1- Pin Present */
#define SYSCON_DC3_C1PLUS (1 << 10) /* Bit 10: C1+ Pin Present */
#define SYSCON_DC3_C1O (1 << 11) /* Bit 11: C1o Pin Present */
#define SYSCON_DC3_C2MINUS (1 << 12) /* Bit 12: C2- Pin Present */
#define SYSCON_DC3_C2PLUS (1 << 13) /* Bit 13: C2+ Pin Present */
#define SYSCON_DC3_C2O (1 << 14) /* Bit 14: C2o Pin Present */
#define SYSCON_DC3_PWMFAULT (1 << 15) /* Bit 15: PWM Fault Pin Pre */
#define SYSCON_DC3_ADC0AIN0 (1 << 16) /* Bit 16: ADC Module 0 AIN0 Pin Present */
#define SYSCON_DC3_ADC0AIN1 (1 << 17) /* Bit 17: ADC Module 0 AIN1 Pin Present */
#define SYSCON_DC3_ADC0AIN2 (1 << 18) /* Bit 18: ADC Module 0 AIN2 Pin Present */
#define SYSCON_DC3_ADC0AIN3 (1 << 19) /* Bit 19: ADC Module 0 AIN3 Pin Present */
#define SYSCON_DC3_ADC0AIN4 (1 << 20) /* Bit 20: ADC Module 0 AIN4 Pin Present */
#define SYSCON_DC3_ADC0AIN5 (1 << 21) /* Bit 21: ADC Module 0 AIN5 Pin Present */
#define SYSCON_DC3_ADC0AIN6 (1 << 22) /* Bit 22: ADC Module 0 AIN6 Pin Present */
#define SYSCON_DC3_ADC0AIN7 (1 << 23) /* Bit 23: ADC Module 0 AIN7 Pin Present */
#define SYSCON_DC3_CCP0 (1 << 24) /* Bit 24: T0CCP0 Pin Present */
#define SYSCON_DC3_CCP1 (1 << 25) /* Bit 25: T0CCP1 Pin Present */
#define SYSCON_DC3_CCP2 (1 << 26) /* Bit 26: T1CCP0 Pin Present */
#define SYSCON_DC3_CCP3 (1 << 27) /* Bit 27: T1CCP1 Pin Present */
#define SYSCON_DC3_CCP4 (1 << 28) /* Bit 28: T2CCP0 Pin Present */
#define SYSCON_DC3_CCP5 (1 << 29) /* Bit 29: T2CCP1 Pin Present */
#define SYSCON_DC3_32KHZ (1 << 31) /* Bit 31: 32KHz Input Clock Available */
/* Device Capabilities 4 */
#define SYSCON_DC4_GPIO(n) (1 << (n))
#define SYSCON_DC4_GPIOA (1 << 0) /* Bit 0: GPIO Port A Present */
#define SYSCON_DC4_GPIOB (1 << 1) /* Bit 1: GPIO Port B Present */
#define SYSCON_DC4_GPIOC (1 << 2) /* Bit 2: GPIO Port C Present */
#define SYSCON_DC4_GPIOD (1 << 3) /* Bit 3: GPIO Port D Present */
#define SYSCON_DC4_GPIOE (1 << 4) /* Bit 4: GPIO Port E Present */
#define SYSCON_DC4_GPIOF (1 << 5) /* Bit 5: GPIO Port F Present */
#define SYSCON_DC4_GPIOG (1 << 6) /* Bit 6: GPIO Port G Present */
#define SYSCON_DC4_GPIOH (1 << 7) /* Bit 7: GPIO Port H Present */
#define SYSCON_DC4_GPIOJ (1 << 8) /* Bit 8: GPIO Port J Present */
#define SYSCON_DC4_ROM (1 << 12) /* Bit 12: Internal Code ROM Present */
#define SYSCON_DC4_UDMA (1 << 13) /* Bit 13: Micro-DMA Module Present */
#define SYSCON_DC4_CCP6 (1 << 14) /* Bit 14: T3CCP0 Pin Present */
#define SYSCON_DC4_CCP7 (1 << 15) /* Bit 15: T3CCP1 Pin Present */
#define SYSCON_DC4_PICAL (1 << 18) /* Bit 18: PIOSC Calibrate */
#define SYSCON_DC4_E1588 (1 << 24) /* Bit 24: 1588 Capable */
#define SYSCON_DC4_EMAC0 (1 << 28) /* Bit 28: Ethernet MAC0 Present */
#define SYSCON_DC4_EPHY0 (1 << 30) /* Bit 30: Ethernet PHY0 Present */
/* Device Capabilities 5 */
#define TIVA_SYSCON_DC5_PWM0 (1 << 0) /* Bit 0: PWM0 Pin Present */
#define TIVA_SYSCON_DC5_PWM1 (1 << 1) /* Bit 1: PWM1 Pin Present */
#define TIVA_SYSCON_DC5_PWM2 (1 << 2) /* Bit 2: PWM2 Pin Present */
#define TIVA_SYSCON_DC5_PWM3 (1 << 3) /* Bit 3: PWM3 Pin Present */
#define TIVA_SYSCON_DC5_PWM4 (1 << 4) /* Bit 4: PWM4 Pin Present */
#define TIVA_SYSCON_DC5_PWM5 (1 << 5) /* Bit 5: PWM5 Pin Present */
#define TIVA_SYSCON_DC5_PWM6 (1 << 6) /* Bit 6: PWM6 Pin Present */
#define TIVA_SYSCON_DC5_PWM7 (1 << 7) /* Bit 7: PWM7 Pin Present */
#define TIVA_SYSCON_DC5_PWMESYNC (1 << 20) /* Bit 20: PWM Extended SYNC Active */
#define TIVA_SYSCON_DC5_PWMEFLT (1 << 21) /* Bit 21: PWM Extended Fault Active */
#define TIVA_SYSCON_DC5_PWMFAULT0 (1 << 24) /* Bit 24: PWM Fault 0 Pin Present */
#define TIVA_SYSCON_DC5_PWMFAULT1 (1 << 25) /* Bit 25: PWM Fault 1 Pin Present */
#define TIVA_SYSCON_DC5_PWMFAULT2 (1 << 26) /* Bit 26: PWM Fault 2 Pin Present */
#define TIVA_SYSCON_DC5_PWMFAULT3 (1 << 27) /* Bit 27: PWM Fault 3 Pin Present */
/* Device Capabilities 6 */
#define TIVA_SYSCON_DC6_USB0_SHIFT (0) /* Bits 0-1: USB Module 0 Present */
#define TIVA_SYSCON_DC6_USB0_MASK (3 << TIVA_SYSCON_DC6_USB0_SHIFT)
# define TIVA_SYSCON_DC6_USB0_NONE (1 << TIVA_SYSCON_DC6_USB0_SHIFT)
# define TIVA_SYSCON_DC6_USB0_DEVICE (2 << TIVA_SYSCON_DC6_USB0_SHIFT)
# define TIVA_SYSCON_DC6_USB0_HOST (3 << TIVA_SYSCON_DC6_USB0_SHIFT)
# define TIVA_SYSCON_DC6_USB0_OTG (3 << TIVA_SYSCON_DC6_USB0_SHIFT)
#define TIVA_SYSCON_DC6_USB0PHY (1 << 4) /* Bit 4: USB Module 0 PHY Present */
/* Device Capabilities 7 */
#define TIVA_SYSCON_DC7_DMACH0 (1 << 0) /* Bit 0: DMA Channel 0 */
#define TIVA_SYSCON_DC7_DMACH1 (1 << 1) /* Bit 1: DMA Channel 1 */
#define TIVA_SYSCON_DC7_DMACH2 (1 << 2) /* Bit 2: DMA Channel 2 */
#define TIVA_SYSCON_DC7_DMACH3 (1 << 3) /* Bit 3: DMA Channel 3 */
#define TIVA_SYSCON_DC7_DMACH4 (1 << 4) /* Bit 4: DMA Channel 4 */
#define TIVA_SYSCON_DC7_DMACH5 (1 << 5) /* Bit 5: DMA Channel 5 */
#define TIVA_SYSCON_DC7_DMACH6 (1 << 6) /* Bit 6: DMA Channel 6 */
#define TIVA_SYSCON_DC7_DMACH7 (1 << 7) /* Bit 7: DMA Channel 7 */
#define TIVA_SYSCON_DC7_DMACH8 (1 << 8) /* Bit 8: DMA Channel 8 */
#define TIVA_SYSCON_DC7_DMACH9 (1 << 9) /* Bit 9: DMA Channel 9 */
#define TIVA_SYSCON_DC7_DMACH10 (1 << 10) /* Bit 10: DMA Channel 10 */
#define TIVA_SYSCON_DC7_DMACH11 (1 << 11) /* Bit 11: DMA Channel 11 */
#define TIVA_SYSCON_DC7_DMACH12 (1 << 12) /* Bit 12: DMA Channel 12 */
#define TIVA_SYSCON_DC7_DMACH13 (1 << 13) /* Bit 13: DMA Channel 13 */
#define TIVA_SYSCON_DC7_DMACH14 (1 << 14) /* Bit 14: DMA Channel 14 */
#define TIVA_SYSCON_DC7_DMACH15 (1 << 15) /* Bit 15: DMA Channel 15 */
#define TIVA_SYSCON_DC7_DMACH16 (1 << 16) /* Bit 16: DMA Channel 16 */
#define TIVA_SYSCON_DC7_DMACH17 (1 << 17) /* Bit 17: DMA Channel 17 */
#define TIVA_SYSCON_DC7_DMACH18 (1 << 18) /* Bit 18: DMA Channel 18 */
#define TIVA_SYSCON_DC7_DMACH19 (1 << 19) /* Bit 19: DMA Channel 19 */
#define TIVA_SYSCON_DC7_DMACH20 (1 << 20) /* Bit 20: DMA Channel 20 */
#define TIVA_SYSCON_DC7_DMACH21 (1 << 21) /* Bit 21: DMA Channel 21 */
#define TIVA_SYSCON_DC7_DMACH22 (1 << 22) /* Bit 22: DMA Channel 22 */
#define TIVA_SYSCON_DC7_DMACH23 (1 << 23) /* Bit 23: DMA Channel 23 */
#define TIVA_SYSCON_DC7_DMACH24 (1 << 24) /* Bit 24: DMA Channel 24 */
#define TIVA_SYSCON_DC7_DMACH25 (1 << 25) /* Bit 25: DMA Channel 25 */
#define TIVA_SYSCON_DC7_DMACH26 (1 << 26) /* Bit 26: DMA Channel 26 */
#define TIVA_SYSCON_DC7_DMACH27 (1 << 27) /* Bit 27: DMA Channel 27 */
#define TIVA_SYSCON_DC7_DMACH28 (1 << 28) /* Bit 28: DMA Channel 28 */
#define TIVA_SYSCON_DC7_DMACH29 (1 << 29) /* Bit 29: DMA Channel 29 */
#define TIVA_SYSCON_DC7_DMACH30 (1 << 30) /* Bit 30: DMA Channel 30 */
/* Device Capabilities 8 */
#define TIVA_SYSCON_DC8_ADC0AIN0 (1 << 0) /* Bit 0: ADC Module 0 AIN0 Pin Present */
#define TIVA_SYSCON_DC8_ADC0AIN1 (1 << 1) /* Bit 1: ADC Module 0 AIN1 Pin Present */
#define TIVA_SYSCON_DC8_ADC0AIN2 (1 << 2) /* Bit 2: ADC Module 0 AIN2 Pin Present */
#define TIVA_SYSCON_DC8_ADC0AIN3 (1 << 3) /* Bit 3: ADC Module 0 AIN3 Pin Present */
#define TIVA_SYSCON_DC8_ADC0AIN4 (1 << 4) /* Bit 4: ADC Module 0 AIN4 Pin Present */
#define TIVA_SYSCON_DC8_ADC0AIN5 (1 << 5) /* Bit 5: ADC Module 0 AIN5 Pin Present */
#define TIVA_SYSCON_DC8_ADC0AIN6 (1 << 6) /* Bit 6: ADC Module 0 AIN6 Pin Present */
#define TIVA_SYSCON_DC8_ADC0AIN7 (1 << 7) /* Bit 7: ADC Module 0 AIN7 Pin Present */
#define TIVA_SYSCON_DC8_ADC0AIN8 (1 << 8) /* Bit 8: ADC Module 0 AIN8 Pin Present */
#define TIVA_SYSCON_DC8_ADC0AIN9 (1 << 9) /* Bit 9: ADC Module 0 AIN9 Pin Present */
#define TIVA_SYSCON_DC8_ADC0AIN10 (1 << 10) /* Bit 10: ADC Module 0 AIN10 Pin Present */
#define TIVA_SYSCON_DC8_ADC0AIN11 (1 << 11) /* Bit 11: ADC Module 0 AIN11 Pin Present */
#define TIVA_SYSCON_DC8_ADC0AIN12 (1 << 12) /* Bit 12: ADC Module 0 AIN12 Pin Present */
#define TIVA_SYSCON_DC8_ADC0AIN13 (1 << 13) /* Bit 13: ADC Module 0 AIN13 Pin Present */
#define TIVA_SYSCON_DC8_ADC0AIN14 (1 << 14) /* Bit 14: ADC Module 0 AIN14 Pin Present */
#define TIVA_SYSCON_DC8_ADC0AIN15 (1 << 15) /* Bit 15: ADC Module 0 AIN15 Pin Present */
#define TIVA_SYSCON_DC8_ADC1AIN0 (1 << 16) /* Bit 16: ADC Module 1 AIN0 Pin Present */
#define TIVA_SYSCON_DC8_ADC1AIN1 (1 << 17) /* Bit 17: ADC Module 1 AIN1 Pin Present */
#define TIVA_SYSCON_DC8_ADC1AIN2 (1 << 18) /* Bit 18: ADC Module 1 AIN2 Pin Present */
#define TIVA_SYSCON_DC8_ADC1AIN3 (1 << 19) /* Bit 19: ADC Module 1 AIN3 Pin Present */
#define TIVA_SYSCON_DC8_ADC1AIN4 (1 << 20) /* Bit 20: ADC Module 1 AIN4 Pin Present */
#define TIVA_SYSCON_DC8_ADC1AIN5 (1 << 21) /* Bit 21: ADC Module 1 AIN5 Pin Present */
#define TIVA_SYSCON_DC8_ADC1AIN6 (1 << 22) /* Bit 22: ADC Module 1 AIN6 Pin Present */
#define TIVA_SYSCON_DC8_ADC1AIN7 (1 << 23) /* Bit 23: ADC Module 1 AIN7 Pin Present */
#define TIVA_SYSCON_DC8_ADC1AIN8 (1 << 24) /* Bit 24: ADC Module 1 AIN8 Pin Present */
#define TIVA_SYSCON_DC8_ADC1AIN9 (1 << 25) /* Bit 25: ADC Module 1 AIN9 Pin Present */
#define TIVA_SYSCON_DC8_ADC1AIN10 (1 << 26) /* Bit 26: ADC Module 1 AIN10 Pin Present */
#define TIVA_SYSCON_DC8_ADC1AIN11 (1 << 27) /* Bit 27: ADC Module 1 AIN11 Pin Present */
#define TIVA_SYSCON_DC8_ADC1AIN12 (1 << 28) /* Bit 28: ADC Module 1 AIN12 Pin Present */
#define TIVA_SYSCON_DC8_ADC1AIN13 (1 << 29) /* Bit 29: ADC Module 1 AIN13 Pin Present */
#define TIVA_SYSCON_DC8_ADC1AIN14 (1 << 30) /* Bit 30: ADC Module 1 AIN14 Pin Present */
#define TIVA_SYSCON_DC8_ADC1AIN15 (1 << 31) /* Bit 31: ADC Module 1 AIN15 Pin Present */
/* Software Reset Control 0 */
#define SYSCON_SRCR0_WDT0 (1 << 3) /* Bit 3: Watchdog Timer 0 Reset Control */
#define SYSCON_SRCR0_HIB (1 << 6) /* Bit 6: Hibernation Module Reset Control */
#define SYSCON_SRCR0_ADC0 (1 << 16) /* Bit 16: ADC0 Reset Control */
#define SYSCON_SRCR0_ADC1 (1 << 17) /* Bit 17: ADC1 Reset Control */
#define SYSCON_SRCR0_CAN0 (1 << 24) /* Bit 24: CAN0 Reset Control */
#define SYSCON_SRCR0_WDT1 (1 << 28) /* Bit 28: Watchdog Timer 1 Reset Control */
/* Software Reset Control 1 */
#define SYSCON_SRCR1_UART0 (1 << 0) /* Bit 0: UART0 Reset Control */
#define SYSCON_SRCR1_UART1 (1 << 1) /* Bit 1: UART1 Reset Control */
#define SYSCON_SRCR1_UART2 (1 << 2) /* Bit 2: UART2 Reset Control */
#define SYSCON_SRCR1_SSI0 (1 << 4) /* Bit 4: SSI0 Reset Control */
#define SYSCON_SRCR1_SSI1 (1 << 5) /* Bit 5: SSI1 Reset Control */
#define SYSCON_SRCR1_I2C0 (1 << 12) /* Bit 12: I2C 0 Reset Control */
#define SYSCON_SRCR1_I2C1 (1 << 14) /* Bit 14: I2C 1 Reset Control */
#define SYSCON_SRCR1_TIMER0 (1 << 16) /* Bit 16: Timer 0 Reset Control */
#define SYSCON_SRCR1_TIMER1 (1 << 17) /* Bit 17: Timer 1 Reset Control */
#define SYSCON_SRCR1_TIMER2 (1 << 18) /* Bit 18: Timer 2 Reset Control */
#define SYSCON_SRCR1_TIMER3 (1 << 19) /* Bit 19: Timer 3 Reset Control */
#define SYSCON_SRCR1_COMP0 (1 << 24) /* Bit 24: Analog Comparator 0 Reset Control */
#define SYSCON_SRCR1_COMP1 (1 << 25) /* Bit 25: Analog Comparator 1 Reset Control */
/* Software Reset Control 2 */
#define SYSCON_SRCR2_GPIO(n) (1 << (n))
#define SYSCON_SRCR2_GPIOA (1 << 0) /* Bit 0: Port A Reset Control */
#define SYSCON_SRCR2_GPIOB (1 << 1) /* Bit 1: Port B Reset Control */
#define SYSCON_SRCR2_GPIOC (1 << 2) /* Bit 2: Port C Reset Control */
#define SYSCON_SRCR2_GPIOD (1 << 3) /* Bit 3: Port D Reset Control */
#define SYSCON_SRCR2_GPIOE (1 << 4) /* Bit 4: Port E Reset Control */
#define SYSCON_SRCR2_GPIOF (1 << 5) /* Bit 5: Port F Reset Control */
#define SYSCON_SRCR2_UDMA (1 << 13) /* Bit 13: Micro-DMA Reset Control */
#define SYSCON_SRCR2_USB0 (1 << 16) /* Bit 16: USB0 Reset Control */
/* Run Mode Clock Gating Control Register 0 */
#define SYSCON_RCGC0_WDT0 (1 << 3) /* Bit 3: WDT0 Clock Gating Control */
#define SYSCON_RCGC0_HIB (1 << 6) /* Bit 6: HIB Clock Gating Control */
#define SYSCON_RCGC0_MAXADC0SPD_SHIFT (8) /* Bits 8-9: ADC0 Sample Speed */
#define SYSCON_RCGC0_MAXADC0SPD_MASK (3 << SYSCON_RCGC0_MAXADC0SPD_SHIFT)
# define SYSCON_RCGC0_MAXADC0_125KSPS (0 << SYSCON_RCGC0_MAXADC0SPD_SHIFT)
# define SYSCON_RCGC0_MAXADC0_250KSPS (1 << SYSCON_RCGC0_MAXADC0SPD_SHIFT)
# define SYSCON_RCGC0_MAXADC0_500KSPS (2 << SYSCON_RCGC0_MAXADC0SPD_SHIFT)
# define SYSCON_RCGC0_MAXADC0_1MSPS (3 << SYSCON_RCGC0_MAXADC0SPD_SHIFT)
#define SYSCON_RCGC0_MAXADC1SPD_SHIFT (8) /* Bits 10-11: ADC1 Sample Speed */
#define SYSCON_RCGC0_MAXADC1SPD_MASK (3 << SYSCON_RCGC0_MAXADC1SPD_SHIFT)
# define SYSCON_RCGC0_MAXADC1_125KSPS (0 << SYSCON_RCGC0_MAXADC1SPD_SHIFT)
# define SYSCON_RCGC0_MAXADC1_250KSPS (1 << SYSCON_RCGC0_MAXADC1SPD_SHIFT)
# define SYSCON_RCGC0_MAXADC1_500KSPS (2 << SYSCON_RCGC0_MAXADC1SPD_SHIFT)
# define SYSCON_RCGC0_MAXADC1_1MSPS (3 << SYSCON_RCGC0_MAXADC1SPD_SHIFT)
#define SYSCON_RCGC0_ADC0 (1 << 16) /* Bit 16: ADC0 Clock Gating Control */
#define SYSCON_RCGC0_CAN0 (1 << 24) /* Bit 24: CAN0 Clock Gating Control */
#define SYSCON_RCGC0_WDT1 (1 << 28) /* Bit 28: WDT1 Clock Gating Control */
/* Run Mode Clock Gating Control Register 1 */
#define SYSCON_RCGC1_UART0 (1 << 0) /* Bit 0: UART0 Clock Gating Control */
#define SYSCON_RCGC1_UART1 (1 << 1) /* Bit 1: UART1 Clock Gating Control */
#define SYSCON_RCGC1_UART2 (1 << 2) /* Bit 2: UART2 Clock Gating Control */
#define SYSCON_RCGC1_SSI0 (1 << 4) /* Bit 4: SSI0 Clock Gating Control */
#define SYSCON_RCGC1_SSI1 (1 << 5) /* Bit 5: SSI1 Clock Gating Control */
#define SYSCON_RCGC1_I2C0 (1 << 12) /* Bit 12: I2C0 Clock Gating Control */
#define SYSCON_RCGC1_I2C1 (1 << 14) /* Bit 14: I2C1 Clock Gating Control */
#define SYSCON_RCGC1_TIMER0 (1 << 16) /* Bit 16: Timer 0 Clock Gating Control */
#define SYSCON_RCGC1_TIMER1 (1 << 17) /* Bit 17: Timer 1 Clock Gating Control */
#define SYSCON_RCGC1_TIMER2 (1 << 18) /* Bit 18: Timer 2 Clock Gating Control */
#define SYSCON_RCGC1_TIMER3 (1 << 19) /* Bit 19: Timer 3 Clock Gating Control */
#define SYSCON_RCGC1_COMP0 (1 << 24) /* Bit 24: Analog Comparator 0 Clock Gating */
#define SYSCON_RCGC1_COMP1 (1 << 25) /* Bit 25: Analog Comparator 1 Clock Gating */
/* Run Mode Clock Gating Control Register 2 */
#define SYSCON_RCGC2_GPIO(n) (1 << (n))
#define SYSCON_RCGC2_GPIOA (1 << 0) /* Bit 0: Port A Clock Gating Control */
#define SYSCON_RCGC2_GPIOB (1 << 1) /* Bit 1: Port B Clock Gating Control */
#define SYSCON_RCGC2_GPIOC (1 << 2) /* Bit 2: Port C Clock Gating Control */
#define SYSCON_RCGC2_GPIOD (1 << 3) /* Bit 3: Port D Clock Gating Control */
#define SYSCON_RCGC2_GPIOE (1 << 4) /* Bit 4: Port E Clock Gating Control */
#define SYSCON_RCGC2_GPIOF (1 << 5) /* Bit 5: Port F Clock Gating Control */
#define SYSCON_RCGC2_UDMA (1 << 13) /* Bit 13: Micro-DMA Clock Gating Control */
#define SYSCON_RCGC2_USB0 (1 << 16) /* Bit 16: USB0 Clock Gating Control */
/* Sleep Mode Clock Gating Control Register 0 */
#define SYSCON_SCGC0_WDT0 (1 << 3) /* Bit 3: WDT0 Clock Gating Control */
#define SYSCON_SCGC0_HIB (1 << 6) /* Bit 6: HIB Clock Gating Control */
#define SYSCON_SCGC0_ADC0 (1 << 16) /* Bit 16: ADC0 Clock Gating Control */
#define SYSCON_SCGC0_ADC1 (1 << 17) /* Bit 17: ADC1 Clock Gating Control */
#define SYSCON_SCGC0_CAN0 (1 << 24) /* Bit 24: CAN0 Clock Gating Control */
#define SYSCON_SCGC0_WDT1 (1 << 28) /* Bit 28: WDT1 Clock Gating Control */
/* Sleep Mode Clock Gating Control Register 1 */
#define SYSCON_SCGC1_UART0 (1 << 0) /* Bit 0: UART0 Clock Gating Control */
#define SYSCON_SCGC1_UART1 (1 << 1) /* Bit 1: UART1 Clock Gating Control */
#define SYSCON_SCGC1_UART2 (1 << 2) /* Bit 2: UART2 Clock Gating Control */
#define SYSCON_SCGC1_SSI0 (1 << 4) /* Bit 4: SSI0 Clock Gating Control */
#define SYSCON_SCGC1_SSI1 (1 << 5) /* Bit 5: SSI1 Clock Gating Control */
#define SYSCON_SCGC1_I2C0 (1 << 12) /* Bit 12: I2C0 Clock Gating Control */
#define SYSCON_SCGC1_I2C1 (1 << 14) /* Bit 14: I2C1 Clock Gating Control */
#define SYSCON_SCGC1_TIMER0 (1 << 16) /* Bit 16: Timer 0 Clock Gating Control */
#define SYSCON_SCGC1_TIMER1 (1 << 17) /* Bit 17: Timer 1 Clock Gating Control */
#define SYSCON_SCGC1_TIMER2 (1 << 18) /* Bit 18: Timer 2 Clock Gating Control */
#define SYSCON_SCGC1_TIMER3 (1 << 19) /* Bit 19: Timer 3 Clock Gating Control */
#define SYSCON_SCGC1_COMP0 (1 << 24) /* Bit 24: Analog Comparator 0 Clock Gating */
#define SYSCON_SCGC1_COMP1 (1 << 25) /* Bit 25: Analog Comparator 1 Clock Gating */
/* Sleep Mode Clock Gating Control Register 2 */
#define SYSCON_SCGC2_GPIO(n) (1 << (n))
#define SYSCON_SCGC2_GPIOA (1 << 0) /* Bit 0: Port A Clock Gating Control */
#define SYSCON_SCGC2_GPIOB (1 << 1) /* Bit 1: Port B Clock Gating Control */
#define SYSCON_SCGC2_GPIOC (1 << 2) /* Bit 2: Port C Clock Gating Control */
#define SYSCON_SCGC2_GPIOD (1 << 3) /* Bit 3: Port D Clock Gating Control */
#define SYSCON_SCGC2_GPIOE (1 << 4) /* Bit 4: Port E Clock Gating Control */
#define SYSCON_SCGC2_GPIOF (1 << 5) /* Bit 5: Port F Clock Gating Control */
#define SYSCON_SCGC2_UDMA (1 << 13) /* Bit 13: Micro-DMA Clock Gating Control */
#define SYSCON_SCGC2_USB0 (1 << 16) /* Bit 16: PHY0 Clock Gating Control */
/* Deep Sleep Mode Clock Gating Control Register 0 */
#define SYSCON_DCGC0_WDT0 (1 << 3) /* Bit 3: WDT0 Clock Gating Control */
#define SYSCON_DCGC0_HIB (1 << 6) /* Bit 6: HIB Clock Gating Control */
#define SYSCON_DCGC0_ADC0 (1 << 16) /* Bit 16: ADC0 Clock Gating Control */
#define SYSCON_DCGC0_ADC1 (1 << 17) /* Bit 17: ADC1 Clock Gating Control */
#define SYSCON_DCGC0_CAN0 (1 << 24) /* Bit 24: CAN0 Clock Gating Control */
#define SYSCON_DCGC0_WDT1 (1 << 28) /* Bit 28: WDT1 Clock Gating Control */
/* Deep Sleep Mode Clock Gating Control Register 1 */
#define SYSCON_DCGC1_UART0 (1 << 0) /* Bit 0: UART0 Clock Gating Control */
#define SYSCON_DCGC1_UART1 (1 << 1) /* Bit 1: UART1 Clock Gating Control */
#define SYSCON_DCGC1_UART2 (1 << 2) /* Bit 2: UART2 Clock Gating Control */
#define SYSCON_DCGC1_SSI0 (1 << 4) /* Bit 4: SSI0 Clock Gating Control */
#define SYSCON_DCGC1_SSI1 (1 << 5) /* Bit 5: SSI1 Clock Gating Control */
#define SYSCON_DCGC1_I2C0 (1 << 12) /* Bit 12: I2C0 Clock Gating Control */
#define SYSCON_DCGC1_I2C1 (1 << 14) /* Bit 14: I2C1 Clock Gating Control */
#define SYSCON_DCGC1_TIMER0 (1 << 16) /* Bit 16: Timer 0 Clock Gating Control */
#define SYSCON_DCGC1_TIMER1 (1 << 17) /* Bit 17: Timer 1 Clock Gating Control */
#define SYSCON_DCGC1_TIMER2 (1 << 18) /* Bit 18: Timer 2 Clock Gating Control */
#define SYSCON_DCGC1_TIMER3 (1 << 19) /* Bit 19: Timer 3 Clock Gating Control */
#define SYSCON_DCGC1_COMP0 (1 << 24) /* Bit 24: Analog Comparator 0 Clock Gating */
#define SYSCON_DCGC1_COMP1 (1 << 25) /* Bit 25: Analog Comparator 1 Clock Gating */
/* Deep Sleep Mode Clock Gating Control Register 2 */
#define SYSCON_DCGC2_GPIO(n) (1 << (n))
#define SYSCON_DCGC2_GPIOA (1 << 0) /* Bit 0: Port A Clock Gating Control */
#define SYSCON_DCGC2_GPIOB (1 << 1) /* Bit 1: Port B Clock Gating Control */
#define SYSCON_DCGC2_GPIOC (1 << 2) /* Bit 2: Port C Clock Gating Control */
#define SYSCON_DCGC2_GPIOD (1 << 3) /* Bit 3: Port D Clock Gating Control */
#define SYSCON_DCGC2_GPIOE (1 << 4) /* Bit 4: Port E Clock Gating Control */
#define SYSCON_DCGC2_GPIOF (1 << 5) /* Bit 5: Port F Clock Gating Control */
#define SYSCON_DCGC2_UDMA (1 << 13) /* Bit 13: Micro-DMA Clock Gating Control */
#define SYSCON_DCGC2_USB0 (1 << 16) /* Bit 16: PHY0 Clock Gating Control */
/* Device Capabilities */
#define TIVA_SYSCON_DC9_ADC0DC0 (1 << 0) /* Bit 0: ADC0 DC0 Present */
#define TIVA_SYSCON_DC9_ADC0DC1 (1 << 1) /* Bit 1: ADC0 DC1 Present */
#define TIVA_SYSCON_DC9_ADC0DC2 (1 << 2) /* Bit 2: ADC0 DC2 Present */
#define TIVA_SYSCON_DC9_ADC0DC3 (1 << 3) /* Bit 3: ADC0 DC3 Present */
#define TIVA_SYSCON_DC9_ADC0DC4 (1 << 4) /* Bit 4: ADC0 DC4 Present */
#define TIVA_SYSCON_DC9_ADC0DC5 (1 << 5) /* Bit 5: ADC0 DC5 Present */
#define TIVA_SYSCON_DC9_ADC0DC6 (1 << 6) /* Bit 6: ADC0 DC6 Present */
#define TIVA_SYSCON_DC9_ADC0DC7 (1 << 7) /* Bit 7: ADC0 DC7 Present */
#define TIVA_SYSCON_DC9_ADC1DC0 (1 << 16) /* Bit 16: ADC1 DC0 Present */
#define TIVA_SYSCON_DC9_ADC1DC1 (1 << 17) /* Bit 17: ADC1 DC1 Present */
#define TIVA_SYSCON_DC9_ADC1DC2 (1 << 18) /* Bit 18: ADC1 DC2 Present */
#define TIVA_SYSCON_DC9_ADC1DC3 (1 << 19) /* Bit 19: ADC1 DC3 Present */
#define TIVA_SYSCON_DC9_ADC1DC4 (1 << 20) /* Bit 20: ADC1 DC4 Present */
#define TIVA_SYSCON_DC9_ADC1DC5 (1 << 21) /* Bit 21: ADC1 DC5 Present */
#define TIVA_SYSCON_DC9_ADC1DC6 (1 << 22) /* Bit 22: ADC1 DC6 Present */
#define TIVA_SYSCON_DC9_ADC1DC7 (1 << 23) /* Bit 23: ADC1 DC7 Present */
/* Non-Volatile Memory Information */
#define TIVA_SYSCON_NVMSTAT_FWB (1 << 0) /* Bit 0: 32 Word Flash Write Buffer Available */
/********************************************************************************************
* Public Types
********************************************************************************************/
/********************************************************************************************
* Public Data
********************************************************************************************/
/********************************************************************************************
* Public Functions
********************************************************************************************/
#endif /* __ARCH_ARM_SRC_TIVA_CHIP_LM4F_SYSCONTROL_H */
|