path: root/nuttx/arch/z80/src/Makefile.sdcc

############################################################################
# arch/z80/src/Makefile.sdcc
#
#   Copyright (C) 2008, 2011-2012 Gregory Nutt. All rights reserved.
#   Author: Gregory Nutt <gnutt@nuttx.org>
#
# Redistribution and use in source and binary forms, with or without
# modification, are permitted provided that the following conditions
# are met:
#
# 1. Redistributions of source code must retain the above copyright
#    notice, this list of conditions and the following disclaimer.
# 2. Redistributions in binary form must reproduce the above copyright
#    notice, this list of conditions and the following disclaimer in
#    the documentation and/or other materials provided with the
#    distribution.
# 3. Neither the name NuttX nor the names of its contributors may be
#    used to endorse or promote products derived from this software
#    without specific prior written permission.
#
# THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
# "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
# LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
# FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE
# COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
# INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING,
# BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS
# OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED
# AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
# LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
# ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
# POSSIBILITY OF SUCH DAMAGE.
#
############################################################################

############################################################################
# Tools
# CFLAGS, CPPFLAGS, ASFLAGS, LDFLAGS are set in $(TOPDIR)/Make.defs

CFLAGS += -I$(ARCH_SRCDIR)/chip -I$(ARCH_SRCDIR)/common -I$(TOPDIR)/sched
CPPFLAGS += -D__ASSEMBLY__

############################################################################
# Files and directories

# There should be one head source (.asm file)

HEAD_OBJ = $(HEAD_ASRC:$(ASMEXT)=$(OBJEXT))

# Assembly sources and objects

ASRCS = $(CHIP_ASRCS) $(CMN_ASRCS)
AOBJS = $(ASRCS:$(ASMEXT)=$(OBJEXT))

# C sources and objects

CSRCS = $(CHIP_CSRCS) $(CMN_CSRCS)
COBJS = $(CSRCS:.c=$(OBJEXT))

# All sources and objcts

SRCS = $(ASRCS) $(CSRCS)
OBJS = $(AOBJS) $(COBJS)

# Sources that can have dependencies (no .asm files)

DEPSRCS = $(CSRCS)

# Directories

ARCH_SRCDIR = $(TOPDIR)/arch/$(CONFIG_ARCH)/src
BOARDDIR = $(TOPDIR)/arch/$(CONFIG_ARCH)/src/board

VPATH = chip:common:board

# Libraries

LIBGCC = ${shell $(CC) $(ARCHCPUFLAGS) -print-libgcc-file-name}

# Supports dynamic sizing of HEAP.
#
HEAP_BASE = ${shell ./mkhpbase.sh}

############################################################################
# Targets

all: $(HEAD_OBJ) libarch$(LIBEXT)

.PHONY: board/libboard$(LIBEXT)

$(AOBJS) $(HEAD_OBJ): %$(OBJEXT): %$(ASMEXT)
	$(call ASSEMBLE, $<, $@)

$(COBJS): %$(OBJEXT): %.c
	$(call COMPILE, $<, $@)

# This is a kludge to work around some conflicting symbols in libsdcc.lib

$(SDCCLIBDIR)/myz80.lib: $(SDCCLIBDIR)/$(SDCCLIB)
	@cat $(SDCCLIBDIR)/$(SDCCLIB) | \
		grep -v alloc | grep -v free | grep -v printf | \
		grep -v _str  | grep -v _mem | grep -v crt0\.o \
		> myz80.lib
	@mv -f myz80.lib $(SDCCLIBDIR)/myz80.lib

# Create a header file that contains addressing information needed by the code

up_mem.h:
	@echo "#ifndef __UP_MEM_H" >up_mem.h
	@echo "#define __UP_MEM_H" >>up_mem.h
	@echo "" >>up_mem.h
	@echo "#include <nuttx/config.h>" >>up_mem.h
	@echo "" >>up_mem.h
	@echo "#define CONFIG_STACK_END   $(CONFIG_DRAM_SIZE)" >> up_mem.h
	@echo "#define CONFIG_STACK_BASE  (CONFIG_STACK_END - $(CONFIG_IDLETHREAD_STACKSIZE))" >> up_mem.h
	@echo "#define CONFIG_HEAP1_END   CONFIG_STACK_BASE" >> up_mem.h
	@echo "#define CONFIG_HEAP1_BASE  $(HEAP_BASE)" >> up_mem.h
	@echo "" >>up_mem.h
	@echo "#endif /* __UP_MEM_H */" >>up_mem.h

asm_mem.h:
	@echo "	CONFIG_COMPILER_OTHER	== 0" > asm_mem.h
	@echo "	CONFIG_COMPILER_SDCC	== 1" >> asm_mem.h
ifeq ($(CC),sdcc)
	@echo "	CONFIG_COMPILER	== 1" >> asm_mem.h
else
	@echo "	CONFIG_COMPILER	== 0" >> asm_mem.h
endif
	@echo "	CONFIG_STACK_END	== ($(CONFIG_DRAM_SIZE) - 1)" >> asm_mem.h
	@echo "	CONFIG_STACK_BASE	== (CONFIG_STACK_END - $(CONFIG_IDLETHREAD_STACKSIZE))" >> asm_mem.h
	@echo "	CONFIG_HEAP1_END	== (CONFIG_STACK_END - $(CONFIG_IDLETHREAD_STACKSIZE) - 1)" >> asm_mem.h
	@echo "	CONFIG_HEAP1_BASE	== $(HEAP_BASE)" >> asm_mem.h

# Combine all objects in this directory into a library

libarch$(LIBEXT): up_mem.h asm_mem.h $(OBJS)
	$(call ARCHIVE, $@, "$(OBJS)")

# This builds the libboard library in the board/ subdirectory 

board/libboard$(LIBEXT):
	@$(MAKE) -C board TOPDIR="$(TOPDIR)" libboard$(LIBEXT) EXTRADEFINES=$(EXTRADEFINES)

# This target builds the final executable

pass1.hex: up_mem.h asm_mem.h $(SDCCLIBDIR)/myz80.lib $(HEAD_OBJ) board/libboard$(LIBEXT)
	@echo "LD: pass1.hex"
	@echo "--" >pass1.lnk				# Non-interactive
	@echo "-k $(BOARDDIR)" >>pass1.lnk		# Path to board library
	@echo "-k $(SDCCLIBDIR)" >>pass1.lnk		# Path to SDCC z80 library
	@echo "-l libboard$(LIBEXT)" >>pass1.lnk	# Name of board library
	@for LIB in $(LINKLIBS); do \
		echo "-l $(TOPDIR)/lib/$$LIB" >> pass1.lnk ;\
	done
	@echo "-l myz80.lib" >>pass1.lnk		# Name of SDCC z80 library
ifneq ($(CONFIG_LINKER_START_AREA),)
	@echo "-b START=$(CONFIG_LINKER_START_AREA)" >>pass1.lnk		# Start of START area
else
	@echo "-b START=0" >>pass1.lnk			# Start of START area
endif
ifneq ($(CONFIG_LINKER_CODE_AREA),)
	@echo "-b _CODE=$(CONFIG_LINKER_CODE_AREA)" >>pass1.lnk		# Start of _CODE area
else
	@echo "-b _CODE=256" >>pass1.lnk		# Start of _CODE area
endif
	@echo "-i" >>pass1.lnk				# Intel hex format
	@echo "-x" >>pass1.lnk				# Hexadecimal
	@echo "-m" >>pass1.lnk				# Generate a map file
	@echo "-j" >>pass1.lnk				# Generate a symbol file
	@echo "pass1.hex" >>pass1.lnk			# Path to head object
	@echo "$(HEAD_OBJ)" >>pass1.lnk		# Path to head object
	@echo "-e" >>pass1.lnk				# End of script
	@$(LD) -f pass1.lnk
	@rm -f up_mem.h asm_mem.h
	@rm -f up_allocateheap$(OBJEXT) $(HEAD_OBJ) libarch$(LIBEXT)
	@$(MAKE) TOPDIR="$(TOPDIR)" libarch$(LIBEXT)
	@$(MAKE) TOPDIR="$(TOPDIR)" $(HEAD_OBJ)

nuttx.hex: up_mem.h asm_mem.h $(SDCCLIBDIR)/myz80.lib $(HEAD_OBJ) board/libboard$(LIBEXT)
	@echo "LD: nuttx.hex"
	@echo "--" >nuttx.lnk				# Non-interactive
	@echo "-k $(BOARDDIR)" >>nuttx.lnk		# Path to board library
	@echo "-k $(SDCCLIBDIR)" >>nuttx.lnk		# Path to SDCC z80 library
	@echo "-l libboard$(LIBEXT)" >>nuttx.lnk	# Name of board library
	@for LIB in $(LINKLIBS); do \
		echo "-l $(TOPDIR)/lib/$$LIB" >> nuttx.lnk ;\
	done
	@echo "-l myz80.lib" >>nuttx.lnk		# Name of SDCC z80 library
ifneq ($(CONFIG_LINKER_START_AREA),)
	@echo "-b START=$(CONFIG_LINKER_START_AREA)" >>nuttx.lnk		# Start of START area
else
	@echo "-b START=0" >>nuttx.lnk			# Start of START area
endif
ifneq ($(CONFIG_LINKER_CODE_AREA),)
	@echo "-b _CODE=$(CONFIG_LINKER_CODE_AREA)" >>nuttx.lnk		# Start of _CODE area
else
	@echo "-b _CODE=256" >>nuttx.lnk		# Start of _CODE area
endif
	@echo "-i" >>nuttx.lnk				# Intel hex format
	@echo "-x" >>nuttx.lnk				# Hexadecimal
	@echo "-m" >>nuttx.lnk				# Generate a map file
	@echo "-j" >>nuttx.lnk				# Generate a symbol file
	@echo "nuttx.hex" >>nuttx.lnk			# Path to head object
	@echo "$(HEAD_OBJ)" >>nuttx.lnk		# Path to head object
	@echo "-e" >>nuttx.lnk				# End of script
	@$(LD) -f nuttx.lnk

nuttx$(EXEEXT): pass1.hex nuttx.hex
	@rm -f pass1.*
	@cp -f nuttx.map $(TOPDIR)/.
ifeq ($(EXEEXT),.cmd)
	sed s/:00000001FF/:00520001AD/ nuttx.hex | \
	hex2cmd > $(TOPDIR)/nuttx.cmd
else
	@packihx nuttx.hex > $(TOPDIR)/nuttx$(EXEEXT)
endif

# This is part of the top-level export target

export_head: board/libboard$(LIBEXT) $(HEAD_OBJ)
	@if [ -d "$(EXPORT_DIR)/startup" ]; then \
		cp -f $(HEAD_OBJ) "$(EXPORT_DIR)/startup"; \
	 else \
		echo "$(EXPORT_DIR)/startup does not exist"; \
		exit 1; \
	 fi

# Build dependencies

.depend: Makefile up_mem.h asm_mem.h chip/Make.defs $(DEPSRCS)
	@if [ -e board/Makefile ]; then \
		$(MAKE) -C board TOPDIR="$(TOPDIR)" depend ; \
	fi
	@$(MKDEP) --dep-path chip --dep-path common $(CC) -- $(CFLAGS) -- $(DEPSRCS) >Make.dep
	@touch $@

depend: .depend

clean:
	@if [ -e board/Makefile ]; then \
		$(MAKE) -C board TOPDIR="$(TOPDIR)" clean ; \
	fi
	@rm -f libarch$(LIBEXT) up_mem.h asm_mem.h pass1.* nuttx.* *~ .*.swp
	$(call CLEAN)

distclean: clean
	@if [ -e board/Makefile ]; then \
		$(MAKE) -C board TOPDIR="$(TOPDIR)" distclean ; \
	fi
	@rm -f Make.dep .depend

-include Make.dep