#
# For a description of the syntax of this configuration file,
# see misc/tools/kconfig-language.txt.
#
config USBHOST_NPREALLOC
int "Number of pre-allocated class instances"
default 4
---help---
Number of pre-allocated class instances
config USBHOST_BULK_DISABLE
bool "Disable bulk endpoint support"
default n
---help---
On some architectures, selecting this setting will reduce driver size
by disabling bulk endpoint support
config USBHOST_INT_DISABLE
bool "Disable interrupt endpoint support"
default n
---help---
On some architectures, selecting this setting will reduce driver size
by disabling interrupt endpoint support
config USBHOST_ISOC_DISABLE
bool "Disable isochronous endpoint support"
default n
---help---
On some architectures, selecting this setting will reduce driver size
by disabling isochronous endpoint support
config USBHOST_MSC
bool "Mass Storage Class Support"
default n
depends on !BULK_DISABLE
---help---
Enable support for the keyboard class driver. This also depends on
NFILE_DESCRIPTORS > 0 && SCHED_WORKQUEUE=y
config USBHOST_HIDKBD
bool "HID Keyboard Class Support"
default n
depends on !INT_DISABLE
---help---
Enable support for the keyboard class driver. This also depends on
SCHED_WORKQUEUE && !DISABLE_SIGNALS
if USBHOST_HIDKBD
config HIDKBD_POLLUSEC
int "Keyboard Poll Rate (MSEC)"
default 100000
---help---
Device poll rate in microseconds. Default: 100,000 microseconds.
config HIDKBD_DEFPRIO
int "Polling Thread Priority"
default 50
---help---
Priority of the polling thread. Default: 50.
config HIDKBD_STACKSIZE
int "Polling thread stack size"
default 1024
---help---
Stack size for polling thread. Default: 1024
config HIDKBD_BUFSIZE
int "Scancode Buffer Size"
default 64
---help---
Scancode buffer size. Default: 64.
config HIDKBD_NPOLLWAITERS
int "Max Number of Waiters for Poll Event"
default 2
depends on !DISABLE_POLL
---help---
If the poll() method is enabled, this defines the maximum number
of threads that can be waiting for keyboard events. Default: 2.
config HIDKBD_RAWSCANCODES
bool "Use Raw Scan Codes"
default n
---help---
If set to y no conversions will be made on the raw keyboard scan
codes. This option is useful during testing. Default: ASCII conversion.
config HIDKBD_ENCODED
bool "Encode Special Keys"
default n
depends on !HIDKBD_RAWSCANCODES && LIB_KBDCODEC
---help---
Encode special key press events in the user buffer. In this case,
the user end must decode the encoded special key values using the
interfaces defined in include/nuttx/input/kbd_codec.h. These
special keys include such things as up/down arrows, home and end
keys, etc. If this not defined, only 7-bit print-able and control
ASCII characters will be provided to the user.
config HIDKBD_ALLSCANCODES
bool "Use All Scancodes"
default n
---help---
If set to y all 231 possible scancodes will be converted to
something. Default: 104 key US keyboard.
config HIDKBD_NODEBOUNCE
bool "Disable Debounce"
default n
---help---
If set to y normal debouncing is disabled. Default:
Debounce enabled (No repeat keys).
endif
config USBHOST_HIDMOUSE
bool "HID Mouse Class Support"
default n
depends on !INT_DISABLE
---help---
Enable support for the mouse class driver. This also depends on
SCHED_WORKQUEUE && !DISABLE_SIGNALS
if USBHOST_HIDMOUSE
config HIDMOUSE_POLLUSEC
int "Mouse Poll Rate (MSEC)"
default 100000
---help---
Device poll rate in microseconds. Default: 100,000 microseconds.
config HIDMOUSE_DEFPRIO
int "Polling Thread Priority"
default 50
---help---
Priority of the polling thread. Default: 50.
config HIDMOUSE_STACKSIZE
int "Polling thread stack size"
default 1024
---help---
Stack size for polling thread. Default: 1024
config HIDMOUSE_BUFSIZE
int "Scancode Buffer Size"
default 64
---help---
Scancode buffer size. Default: 64.
config HIDMOUSE_NPOLLWAITERS
int "Max Number of Waiters for Poll Event"
default 2
depends on !DISABLE_POLL
---help---
If the poll() method is enabled, this defines the maximum number
of threads that can be waiting for mouse events. Default: 2.
config HIDMOUSE_SWAPXY
bool "Swap X/Y"
default n
---help---
Reverse the meaning of X and Y to handle different display orientations.
config HIDMOUSE_XMAX
int "Maximum X position"
default 320
range 0 32767
---help---
This is the maximum value of the X position that will be reported.
Default: 320
config HIDMOUSE_YMAX
int "Maximum Y position"
default 240
range 0 32767
---help---
This is the maximum value of the Y position that will be reported.
Default: 240
config HIDMOUSE_XSCALE
hex "X scaling factor"
default 0x00010000
---help---
Mouse positions are accumumated from X/Y displacements reported by
the mouse device. This setting provides a scaling value for the X
displacement. This is a fixed precision floating point number with
16 bits of fraction. So a value of 0x00010000 is 1.0, 0x00018000
is 1.5, 0x00024000 is 2.25, etc.
Default: 0x00010000 (1.0)
config HIDMOUSE_YSCALE
hex "Y scaling factor"
default 0x00010000
---help---
Mouse positions are accumumated from X/Y displacements reported by
the mouse device. This setting provides a scaling value for the Y
displacement. This is a fixed precision floating point number with
16 bits of fraction. So a value of 0x00010000 is 1.0, 0x00018000
is 1.5, 0x00024000 is 2.25, etc.
Default: 0x00010000 (1.0)
config HIDMOUSE_XTHRESH
int "X threshold"
default 12
---help---
New mouse positions will only be reported when the X or Y data changes by these
thresholds. This trades reduces data rate for some loss in dragging accuracy.
Default: 12
config HIDMOUSE_THRESHY
int "Y threshold"
default 12
---help---
New touch positions will only be reported when the X or Y data changes by these
thresholds. This trades reduces data rate for some loss in dragging accuracy.
Default: 12
endif
config USBHOST_TRACE
bool "Enable USB HCD tracing for debug"
default n
---help---
Enables USB tracing for debug. Only supported for the HCD and,
further, no supported by all HCD implementations.
if USBHOST_TRACE
config USBHOST_TRACE_NRECORDS
int "Number of trace entries to remember"
default 128
---help---
Number of trace entries to remember.
config USBHOST_TRACE_VERBOSE
bool "Enable verbose debug trace"
default n
---help---
Enable verbose trace output if supported by the platform. The
intent is that if USBHOST_TRACE_VERBOSE is not defined, then only
errors, warnings, and critical messages would be logged. If
USBHOST_TRACE_VERBOSE is defined, then general informative trace
information would also be included.
endif
