#
# For a description of the syntax of this configuration file,
# see misc/tools/kconfig-language.txt.
#
config NX
bool "NX Graphics"
default n
---help---
Enables overall support for graphics library and NX
if NX
config NX_LCDDRIVER
bool "LCD driver"
default y
depends on LCD
---help---
By default, the NX graphics system uses the frame buffer driver interface
defined in include/nuttx/video/fb.h. However, if LCD is support is enabled,
this this option is provide to select, instead, the LCD driver interface
defined in include/nuttx/lcd/lcd.h.
config NX_NPLANES
int "Number of Color Planes"
default 1
---help---
Some YUV color formats requires support for multiple planes, one for
each color component. Unless you have such special hardware (and
are willing to debug a lot of untested logic), this value should be
set to 1.
config NX_BGCOLOR
hex "Initial background color"
default 0x0
---help---
NX will clear the background plane initially. This is the default
color that will be used when the background is cleared. Note: This
logic would have to be extended if you want to support multiple
color planes.
config NX_WRITEONLY
bool "Write-only Graphics Device"
default y if NX_LCDDRIVER && LCD_NOGETRUN
default n if !NX_LCDDRIVER || !LCD_NOGETRUN
---help---
Define if the underlying graphics device does not support read operations.
Automatically defined if NX_LCDDRIVER and LCD_NOGETRUN are
defined.
menu "Supported Pixel Depths"
config NX_DISABLE_1BPP
bool "Disable 1 BPP"
default y
---help---
NX supports a variety of pixel depths. You can save some memory by disabling
support for unused color depths. The selection disables support for 1BPP
pixel depth.
config NX_DISABLE_2BPP
bool "Disable 2 BPP"
default y
---help---
NX supports a variety of pixel depths. You can save some memory by disabling
support for unused color depths. The selection disables support for 2BPP
pixel depth.
config NX_DISABLE_4BPP
bool "Disable 4 BPP"
default y
---help---
NX supports a variety of pixel depths. You can save some memory by disabling
support for unused color depths. The selection disables support for 4BPP
pixel depth.
config NX_DISABLE_8BPP
bool "Disable 8 BPP"
default y
---help---
NX supports a variety of pixel depths. You can save some memory by disabling
support for unused color depths. The selection disables support for 8BPP
pixel depth.
config NX_DISABLE_16BPP
bool "Disable 16 BPP"
default y
---help---
NX supports a variety of pixel depths. You can save some memory by disabling
support for unused color depths. The selection disables support for 16BPP
pixel depth.
config NX_DISABLE_24BPP
bool "Disable 24 BPP"
default y
---help---
NX supports a variety of pixel depths. You can save some memory by disabling
support for unused color depths. The selection disables support for 24BPP
pixel depth.
config NX_DISABLE_32BPP
bool "Disable 32 BPP"
default y
---help---
NX supports a variety of pixel depths. You can save some memory by disabling
support for unused color depths. The selection disables support for 32BPP
pixel depth.
endmenu
config NX_PACKEDMSFIRST
bool "Packed MS First"
default y
depends on NX_DISABLE_1BPP || NX_DISABLE_2BPP || NX_DISABLE_4BPP
---help---
If a pixel depth of less than 8-bits is used, then NX needs to know if the
pixels pack from the MS to LS or from LS to MS
menu "Input Devices"
config NX_XYINPUT
bool
default n
choice
prompt "Mouse/Touchscreen Support"
default NX_XYINPUT_NONE
config NX_XYINPUT_NONE
bool "No X/Y input device"
---help---
There is no X/Y positional input device connected
config NX_XYINPUT_MOUSE
bool "Mouse device support"
select NX_XYINPUT
---help---
X/Y positional input is provided by a mouse. The only difference
between the mouse and touchscreen selection is in the presence or
absence of the mouse buttons. This difference is not used within
NuttX itself, however, graphics applications may need this
information, for example, to handle the different ways that graphic
elements are selected and dragged.
config NX_XYINPUT_TOUCHSCREEN
bool "Touchscreen device support"
select NX_XYINPUT
---help---
X/Y positional input is provided by a touchscreen. The only difference
between the mouse and touchscreen selection is in the presence or
absence of the mouse buttons. This difference is not used within
NuttX itself, however, graphics applications may need this
information, for example, to handle the different ways that graphic
elements are selected and dragged.
endchoice # Mouse/Touchscreen Support
config NX_KBD
bool "Keyboard Support"
default n
---help---
Build in support of keypad/keyboard input.
endmenu
menu "Framed Window Borders"
config NXTK_BORDERWIDTH
int "Border Width"
default 4
---help---
Specifies with with of the border (in pixels) used with framed windows.
The default is 4.
config NXTK_DEFAULT_BORDERCOLORS
bool "Use Default Border Colors"
default y
---help---
If this option is defined, the default system border colors will be
used on framed windows. Otherwise, additional options will be
present so that you can define custom board colors.
if !NXTK_DEFAULT_BORDERCOLORS
config NXTK_BORDERCOLOR1
hex "Border Color"
default 0x0
---help---
Specify the colors of the border used with framed windows.
NXTL_BORDERCOLOR1 is the "normal" color of the border.
NXTK_BORDERCOLOR2 is the shadow side color and so is normally darker.
NXTK_BORDERCOLOR3 is the shiny side color and so is normally brighter.
config NXTK_BORDERCOLOR2
hex "Darker Border Color"
default 0x0
---help---
Specify the colors of the border used with framed windows.
NXTL_BORDERCOLOR1 is the "normal" color of the border.
NXTK_BORDERCOLOR2 is the shadow side color and so is normally darker.
NXTK_BORDERCOLOR3 is the shiny side color and so is normally brighter.
config NXTK_BORDERCOLOR3
hex "Brighter Border Color"
default 0x0
---help---
Specify the colors of the border used with framed windows.
NXTL_BORDERCOLOR1 is the "normal" color of the border.
NXTK_BORDERCOLOR2 is the shadow side color and so is normally darker.
NXTK_BORDERCOLOR3 is the shiny side color and so is normally brighter.
endif # !NXTK_DEFAULT_BORDERCOLORS
endmenu
config NXTK_AUTORAISE
bool "Autoraise"
default n
---help---
If set, a window will be raised to the top if the mouse position is over a
visible portion of the window. Default: A mouse button must be clicked over
a visible portion of the window.
menu "Font Selections"
config NXFONTS_CHARBITS
int "Bits in Character Set"
default 7
range 7 8
---help---
The number of bits in the character set. Current options are only 7 and 8.
The default is 7.
config NXFONT_MONO5X8
bool "Mono 5x8"
default n
---help---
Tiny mono-spaced 5x8 font (font ID FONTID_MONO5X8 = 18)
config NXFONT_SANS17X22
bool "Sans 17x22"
default n
---help---
This option enables support for a tiny, 17x22 san serif font
(font ID FONTID_SANS17X22 == 14).
config NXFONT_SANS20X26
bool "Sans 20x26"
default n
---help---
This option enables support for a tiny, 20x26 san serif font
(font ID FONTID_SANS20X26 == 15).
config NXFONT_SANS23X27
bool "Sans 23x27"
default n
---help---
This option enables support for a tiny, 23x27 san serif font
(font ID FONTID_SANS23X27 == 1).
config NXFONT_SANS22X29
bool "Sans 22x29"
default n
---help---
This option enables support for a small, 22x29 san serif font
(font ID FONTID_SANS22X29 == 2).
config NXFONT_SANS28X37
bool "Sans 28x37"
default n
---help---
This option enables support for a medium, 28x37 san serif font
(font ID FONTID_SANS28X37 == 3).
config NXFONT_SANS39X48
bool "Sans 39x48"
default n
---help---
This option enables support for a large, 39x48 san serif font
(font ID FONTID_SANS39X48 == 4).
config NXFONT_SANS17X23B
bool "Sans 17x23 Bold"
default n
---help---
This option enables support for a tiny, 17x23 san serif bold font
(font ID FONTID_SANS17X23B == 16).
config NXFONT_SANS20X27B
bool "Sans 20x27 Bold"
default n
---help---
This option enables support for a tiny, 20x27 san serif bold font
(font ID FONTID_SANS20X27B == 17).
config NXFONT_SANS22X29B
bool "Sans 22x29 Bold"
default n
---help---
This option enables support for a small, 22x29 san serif bold font
(font ID FONTID_SANS22X29B == 5).
config NXFONT_SANS28X37B
bool "Sans 28x37 Bold"
default n
---help---
This option enables support for a medium, 28x37 san serif bold font
(font ID FONTID_SANS28X37B == 6).
config NXFONT_SANS40X49B
bool "Sans 40x49 Bold"
default n
---help---
This option enables support for a large, 40x49 san serif bold font
(font ID FONTID_SANS40X49B == 7).
config NXFONT_SERIF22X29
bool "Serif 22x29"
default n
---help---
This option enables support for a small, 22x29 font (with serifs)
(font ID FONTID_SERIF22X29 == 8).
config NXFONT_SERIF29X37
bool "Serif 29x37"
default n
---help---
This option enables support for a medium, 29x37 font (with serifs)
(font ID FONTID_SERIF29X37 == 9).
config NXFONT_SERIF38X48
bool "Serif 38x48"
default n
---help---
This option enables support for a large, 38x48 font (with serifs)
(font ID FONTID_SERIF38X48 == 10).
config NXFONT_SERIF22X28B
bool "Serif 22x28 Bold"
default n
---help---
This option enables support for a small, 27x38 bold font (with serifs)
(font ID FONTID_SERIF22X28B == 11).
config NXFONT_SERIF27X38B
bool "Serif 27x38 Bold"
default n
---help---
This option enables support for a medium, 27x38 bold font (with serifs)
(font ID FONTID_SERIF27X38B == 12).
config NXFONT_SERIF38X49B
bool "Serif 38x49 Bold"
default n
---help---
This option enables support for a large, 38x49 bold font (with serifs)
(font ID FONTID_SERIF38X49B == 13).
config NXFONT_PIXEL_UNICODE
bool "Pixel UniCode"
default n
---help---
This option enables support for a small LCD, The "Pixel UniCode"
(font ID FONTID_PIXEL_UNICODE == 19).
config NXFONT_PIXEL_LCD_MACHINE
bool "Pixel lcd machine"
default n
---help---
This option enables support for a small LCD, The "Pixel lcd machine"
(font ID FONTID_PIXEL_LCD_MACHINE == 20).
config NXFONT_X11_MISC_FIXED_4X6
bool "x11 misc fixed 4x6"
default n
---help---
This option enables support for a "x11-misc-fixed-4x6".
(font ID FONTID_X11_MISC_FIXED_4X6 == 21).
config NXFONT_X11_MISC_FIXED_5X7
bool "x11 misc fixed 5x7"
default n
---help---
This option enables support for a "x11-misc-fixed-5x7".
(font ID FONTID_X11_MISC_FIXED_5X7 == 22).
config NXFONT_X11_MISC_FIXED_5X8
bool "x11 misc fixed 5x8"
default n
---help---
This option enables support for a "x11-misc-fixed-5x8".
(font ID FONTID_X11_MISC_FIXED_5X8 == 23).
config NXFONT_X11_MISC_FIXED_6X9
bool "x11 misc fixed 6x9"
default n
---help---
This option enables support for a "x11-misc-fixed-6x9".
(font ID FONTID_X11_MISC_FIXED_6X9 == 24).
config NXFONT_X11_MISC_FIXED_6X10
bool "x11 misc fixed 6x10"
default n
---help---
This option enables support for a "x11-misc-fixed-6x10".
(font ID FONTID_X11_MISC_FIXED_6X10 == 25).
config NXFONT_X11_MISC_FIXED_6X12
bool "x11 misc fixed 6x12"
default n
---help---
This option enables support for a "x11-misc-fixed-6x12".
(font ID FONTID_X11_MISC_FIXED_6X12 == 26).
config NXFONT_X11_MISC_FIXED_6X13
bool "x11 misc fixed 6x13"
default n
---help---
This option enables support for a "x11-misc-fixed-6x13".
(font ID FONTID_X11_MISC_FIXED_6X13 == 27).
config NXFONT_X11_MISC_FIXED_6X13B
bool "x11 misc fixed 6x13B"
default n
---help---
This option enables support for a "x11-misc-fixed-6x13B".
(font ID FONTID_X11_MISC_FIXED_6X13B == 28).
config NXFONT_X11_MISC_FIXED_6X13O
bool "x11 misc fixed 6x13O"
default n
---help---
This option enables support for a "x11-misc-fixed-6x13O".
(font ID FONTID_X11_MISC_FIXED_6X13O == 29).
config NXFONT_X11_MISC_FIXED_7X13
bool "x11 misc fixed 7x13"
default n
---help---
This option enables support for a "x11-misc-fixed-7x13".
(font ID FONTID_X11_MISC_FIXED_7X13 == 30).
config NXFONT_X11_MISC_FIXED_7X13B
bool "x11 misc fixed 7x13B"
default n
---help---
This option enables support for a "x11-misc-fixed-7x13B".
(font ID FONTID_X11_MISC_FIXED_7X13B == 31).
config NXFONT_X11_MISC_FIXED_7X13O
bool "x11 misc fixed 7x13O"
default n
---help---
This option enables support for a "x11-misc-fixed-7x13O".
(font ID FONTID_X11_MISC_FIXED_7X13O == 32).
config NXFONT_X11_MISC_FIXED_7X14
bool "x11 misc fixed 7x14"
default n
---help---
This option enables support for a "x11-misc-fixed-7x14".
(font ID FONTID_X11_MISC_FIXED_7X14 == 33).
config NXFONT_X11_MISC_FIXED_7X14B
bool "x11 misc fixed 7x14B"
default n
---help---
This option enables support for a "x11-misc-fixed-7x14B".
(font ID FONTID_X11_MISC_FIXED_7X14B == 34).
config NXFONT_X11_MISC_FIXED_8X13
bool "x11 misc fixed 8x13"
default n
---help---
This option enables support for a "x11-misc-fixed-8x13".
(font ID FONTID_X11_MISC_FIXED_8X13 == 35).
config NXFONT_X11_MISC_FIXED_8X13B
bool "x11 misc fixed 8x13B"
default n
---help---
This option enables support for a "x11-misc-fixed-8x13B".
(font ID FONTID_X11_MISC_FIXED_8X13B == 36).
config NXFONT_X11_MISC_FIXED_8X13O
bool "x11 misc fixed 8x13O"
default n
---help---
This option enables support for a "x11-misc-fixed-8x13O".
(font ID FONTID_X11_MISC_FIXED_8X13O == 37).
config NXFONT_X11_MISC_FIXED_9X15
bool "x11 misc fixed 9x15"
default n
---help---
This option enables support for a "x11-misc-fixed-9x15".
(font ID FONTID_X11_MISC_FIXED_9X15 == 38).
config NXFONT_X11_MISC_FIXED_9X15B
bool "x11 misc fixed 9x15B"
default n
---help---
This option enables support for a "x11-misc-fixed-9x15B".
(font ID FONTID_X11_MISC_FIXED_9X15B == 39).
config NXFONT_X11_MISC_FIXED_9X18
bool "x11 misc fixed 9x18"
default n
---help---
This option enables support for a "x11-misc-fixed-9x18".
(font ID FONTID_X11_MISC_FIXED_9X18 == 40).
config NXFONT_X11_MISC_FIXED_9X18B
bool "x11 misc fixed 9x18B"
default n
---help---
This option enables support for a "x11-misc-fixed-9x18B".
(font ID FONTID_X11_MISC_FIXED_9X18B == 41).
config NXFONT_X11_MISC_FIXED_10X20
bool "x11 misc fixed 10x20"
default n
---help---
This option enables support for a "x11-misc-fixed-10x20".
(font ID FONTID_X11_MISC_FIXED_10X20 == 42).
endmenu
menuconfig NXTERM
bool "NxTerm"
default n
---help---
Enables building of the NxTerm driver.
if NXTERM
comment "NxTerm Output Text/Graphics Options"
config NXTERM_BPP
int "NxTerm BPP"
default 1 if !NX_DISABLE_1BPP
default 2 if !NX_DISABLE_2BPP
default 4 if !NX_DISABLE_4BPP
default 8 if !NX_DISABLE_8BPP
default 16 if !NX_DISABLE_16BPP
default 24 if !NX_DISABLE_24BPP
default 32 if !NX_DISABLE_32BPP
---help---
Currently, NxTerm supports only a single pixel depth. This
configuration setting must be provided to support that single pixel depth.
Default: The smallest enabled pixel depth. (see NX_DISABLE_*BPP)
config NXTERM_CURSORCHAR
int "Character code to use as the cursor"
default 137
---help---
The bitmap code to use as the cursor. Default '_' (137)
config NXTERM_MXCHARS
int "Max Characters on Display"
default 128
---help---
NxTerm needs to remember every character written to the console so
that it can redraw the window. This setting determines the size of some
internal memory allocations used to hold the character data. Default: 128.
config NXTERM_CACHESIZE
int "Font Cache Size"
default 16
---help---
NxTerm supports caching of rendered fonts. This font caching is required
for two reasons: (1) First, it improves text performance, but more
importantly (2) it preserves the font memory. Since the NX server runs on
a separate server thread, it requires that the rendered font memory persist
until the server has a chance to render the font. Unfortunately, the font
cache would be quite large if all fonts were saved. The NXTERM_CACHESIZE
setting will control the size of the font cache (in number of glyphs). Only that
number of the most recently used glyphs will be retained. Default: 16.
NOTE: There can still be a race condition between the NxTerm driver and the
NX task. If you every see character corruption (especially when printing
a lot of data or scrolling), then increasing the value of NXTERM_CACHESIZE
is something that you should try. Alternatively, you can reduce the size of
MQ_MAXMSGSIZE which will force NxTerm task to pace the server task.
NXTERM_CACHESIZE should be larger than MQ_MAXMSGSIZE in any event.
config NXTERM_LINESEPARATION
int "Line Separation"
default 0
---help---
This the space (in rows) between each row of test. Default: 0
config NXTERM_NOWRAP
bool "No wrap"
default n
---help---
By default, lines will wrap when the test reaches the right hand side
of the window. This setting can be defining to change this behavior so
that the text is simply truncated until a new line is encountered.
comment "NxTerm Input options"
config NXTERM_NXKBDIN
bool "NX KBD input"
default n
---help---
Take input from the NX keyboard input callback. By default, keyboard
input is taken from stdin (/dev/console). If this option is set, then
the interface nxterm_kdbin() is enabled. That interface may be driven
by window callback functions so that keyboard input *only* goes to the
top window.
config NXTERM_KBDBUFSIZE
int "Keyboard Input Buffer Size"
default 16
---help---
If NXTERM_NXKBDIN is enabled, then this value may be used to
define the size of the per-window keyboard input buffer. Default: 16
config NXTERM_NPOLLWAITERS
int "Number of Poll Waiters"
default 4
---help---
The number of threads that can be waiting for read data available.
Default: 4
endif # NXTERM
comment "NX Multi-user only options"
menuconfig NX_MULTIUSER
bool "Multi-user NX Server"
default n
---help---
Configures NX in multi-user mode
if NX_MULTIUSER
config NX_BLOCKING
bool "Blocking"
default n
---help---
Open the client message queues in blocking mode. In this case,
nx_eventhandler() will not return until a message is received and processed.
config NX_MXSERVERMSGS
int "Max Server Messages"
default 32
---help---
Specifies the maximum number of messages that can fit in the message queues.
No additional resources are allocated, but this can be set to prevent
flooding of the client or server with too many messages (PREALLOC_MQ_MSGS
controls how many messages are pre-allocated).
config NX_MXCLIENTMSGS
int "Max Client Messages"
default 16
---help---
Specifies the maximum number of messages that can fit in the message queues.
No additional resources are allocated, but this can be set to prevent
flooding of the client or server with too many messages (PREALLOC_MQ_MSGS
controls how many messages are pre-allocated).
config NX_NXSTART
bool "nx_start()"
default n
---help---
If this option is selected, then the nx_start() interface will be
built. The nx_start() interface provides a single call to initialize
and start the NX server.
if NX_NXSTART
config NXSTART_EXTERNINIT
bool "External display Initialization"
default n
---help---
Define to support external display initialization by platform-
specific code. This this option is defined, then nx_start() will
call up_nxdrvinit(CONFIG_NXSTART_DEVNO) to initialize the graphics
device. This option is necessary if display is used that cannot be
initialized using the standard LCD or framebuffer interfaces.
config NXSTART_SERVERPRIO
int "NX Server priority"
default 110
---help---
Priority of the NX server. This applies only if NX is configured in
multi-user mode (NX_MULTIUSER=y). Default: 110.
NOTE: NXSTART_SERVERPRIO should have a relatively high priority to
avoid data overrun race conditions.
config NXSTART_SERVERSTACK
int "NX Server Stack Size"
default 2048
---help---
NX server thread stack size (in multi-user mode). Default 2048
config NXSTART_DEVNO
int "LCD Device Number"
default 0
depends on NX_LCDDRIVER || NXSTART_EXTERNINIT
---help---
LCD device number (in case there are more than one LCDs connected).
Default: 0
config NXSTART_VPLANE
int "Plane Number"
default 0
depends on !NX_LCDDRIVER && !NXSTART_EXTERNINIT
---help---
Only a single video plane is supported. Default: 0
endif # NX_NXSTART
endif # NX_MULTIUSER
endif # NX
