Tiva ADC: Add Kconfig options for ADC. From Calvin Maguranis

1 files changed, 902 insertions, 0 deletions

diff --git a/nuttx/arch/arm/src/tiva/Kconfig b/nuttx/arch/arm/src/tiva/Kconfig
index 71a5f4e10..acda4530f 100644
--- a/nuttx/arch/arm/src/tiva/Kconfig
+++ b/nuttx/arch/arm/src/tiva/Kconfig
@@ -91,6 +91,8 @@ config ARCH_CHIP_TM4C123GH6PMI
 	select TIVA_HAVE_GPIOD_IRQS
 	select TIVA_HAVE_GPIOE_IRQS
 	select TIVA_HAVE_GPIOF_IRQS
+	select TIVA_HAVE_ADC0
+	select TIVA_HAVE_ADC1
 
 config ARCH_CHIP_TM4C1294NC
 	bool "TM4C1294NC"
@@ -836,12 +838,912 @@ endif # TIVA_TIMER_16BIT
 config TIVA_TIMER_REGDEBUG
 	bool "Register level debug"
 	default n
+	depends on DEBUG
 	---help---
 		Enables extremely detailed register access debug output.
 
 endmenu # Tiva Timer Configuration
 endif # TIVA_TIMER
 
+if TIVA_ADC
+menu "Tiva ADC Configuration"
+
+config TIVA_ADC_CLOCK
+	int "ADC clock in MHz"
+	default 16000000
+	range 16000000 32000000
+	depends on ARM_CHIP_TM4C129
+	---help---
+		Clocking can only be configured for the TM4C129; The TM4C129 ADC can be clocked from 
+		16 MHz to 32 MHz. The TM4C123 clock is limited to 16 MHz.
+
+if TIVA_ADC0
+menu "Tiva ADC0 configuration"
+
+menuconfig TIVA_ADC0_SSE0
+	bool "Enable and configure ADC0 SSE0"
+	default n
+	---help---
+		Select this Sample Sequencer for operation. There are 0-3,4-7 possible SSEs
+		depending on how many ADC peripherals are available (4 per each ADC).
+
+		Configuration variables:
+		- trigger select
+		- priority
+		- input channel step assignment
+
+	config TIVA_ADC0_SSE0_PRIORITY
+		int "Conversion priority, must be a value from 0 to 3, no duplicates"
+		default 0
+		range 0 3
+		depends on TIVA_ADC0_SSE0
+		---help---
+			Set the conversion priority for this SSE. Each ADC has 4 SSEs so the
+			order in which they are serviced is determined by this value.
+
+	config TIVA_ADC0_SSE0_TRIGGER
+		int "Set the trigger source to start a SSE's conversion, see help for options"
+		default 0
+		range 0 15
+		depends on TIVA_ADC0_SSE0
+		---help---
+			Set the trigger source. The following values correspond to the
+			following triggers:
+			- 0x0: Processor (default)
+			- 0x1: *Analog Comparator 0
+			- 0x2: *Analog Comparator 1
+			- 0x3: *Analog Comparator 2
+			- 0x4: External (GPIO Pins)
+			- 0x5: Timer
+			- 0x6: **PWM generator 0
+			- 0x7: **PWM generator 1
+			- 0x8: **PWM generator 2
+			- 0x9: **PWM generator 3
+			- 0xE: Never Trigger
+			- 0xF: Always (continuously sample)
+
+			* Comparators are unsupported
+			** PWM triggering requires additional setup at runtime - There is a special
+			ADC IOCTL defined in the Tiva ADC driver for this purpose.
+
+		menuconfig TIVA_ADC0_SSE0_STEP0
+			bool "Enable and configure ADC0 SSE0 step 0"
+			default n
+			depends on TIVA_ADC0_SSE0
+
+			config TIVA_ADC0_SSE0_STEP0_TS
+				bool "This step will retrieve data from the on-chip temperature sensor."
+				default n
+				depends on TIVA_ADC0_SSE0_STEP0
+
+			config TIVA_ADC0_SSE0_STEP0_AIN
+				int "Set the input AIN. See datasheet for pin to AIN mappings."
+				default 0
+				depends on TIVA_ADC0_SSE0_STEP0
+
+		menuconfig TIVA_ADC0_SSE0_STEP1
+			bool "Enable and configure ADC0 SSE0 step 1"
+			default n
+			depends on TIVA_ADC0_SSE0
+
+			config TIVA_ADC0_SSE0_STEP1_TS
+				bool "This step will retrieve data from the on-chip temperature sensor."
+				default n
+				depends on TIVA_ADC0_SSE0_STEP1
+
+			config TIVA_ADC0_SSE0_STEP1_AIN
+				int "Set the input AIN. See datasheet for pin to AIN mappings."
+				default 0
+				depends on TIVA_ADC0_SSE0_STEP1
+
+		menuconfig TIVA_ADC0_SSE0_STEP2
+			bool "Enable and configure ADC0 SSE0 step 2"
+			default n
+			depends on TIVA_ADC0_SSE0
+
+			config TIVA_ADC0_SSE0_STEP2_TS
+				bool "This step will retrieve data from the on-chip temperature sensor."
+				default n
+				depends on TIVA_ADC0_SSE0_STEP2
+
+			config TIVA_ADC0_SSE0_STEP2_AIN
+				int "Set the input AIN. See datasheet for pin to AIN mappings."
+				default 0
+				depends on TIVA_ADC0_SSE0_STEP2
+
+		menuconfig TIVA_ADC0_SSE0_STEP3
+			bool "Enable and configure ADC0 SSE0 step 3"
+			default n
+			depends on TIVA_ADC0_SSE0
+
+			config TIVA_ADC0_SSE0_STEP3_TS
+				bool "This step will retrieve data from the on-chip temperature sensor."
+				default n
+				depends on TIVA_ADC0_SSE0_STEP3
+
+			config TIVA_ADC0_SSE0_STEP3_AIN
+				int "Set the input AIN. See datasheet for pin to AIN mappings."
+				default 0
+				depends on TIVA_ADC0_SSE0_STEP3
+
+		menuconfig TIVA_ADC0_SSE0_STEP4
+			bool "Enable and configure ADC0 SSE0 step 4"
+			default n
+			depends on TIVA_ADC0_SSE0
+
+			config TIVA_ADC0_SSE0_STEP4_TS
+				bool "This step will retrieve data from the on-chip temperature sensor."
+				default n
+				depends on TIVA_ADC0_SSE0_STEP4
+
+			config TIVA_ADC0_SSE0_STEP4_AIN
+				int "Set the input AIN. See datasheet for pin to AIN mappings."
+				default 0
+				depends on TIVA_ADC0_SSE0_STEP4
+
+		menuconfig TIVA_ADC0_SSE0_STEP5
+			bool "Enable and configure ADC0 SSE0 step 5"
+			default n
+			depends on TIVA_ADC0_SSE0
+
+			config TIVA_ADC0_SSE0_STEP5_TS
+				bool "This step will retrieve data from the on-chip temperature sensor."
+				default n
+				depends on TIVA_ADC0_SSE0_STEP5
+
+			config TIVA_ADC0_SSE0_STEP5_AIN
+				int "Set the input AIN. See datasheet for pin to AIN mappings."
+				default 0
+				depends on TIVA_ADC0_SSE0_STEP5
+
+		menuconfig TIVA_ADC0_SSE0_STEP6
+			bool "Enable and configure ADC0 SSE0 step 6"
+			default n
+			depends on TIVA_ADC0_SSE0
+
+			config TIVA_ADC0_SSE0_STEP6_TS
+				bool "This step will retrieve data from the on-chip temperature sensor."
+				default n
+				depends on TIVA_ADC0_SSE0_STEP6
+
+			config TIVA_ADC0_SSE0_STEP6_AIN
+				int "Set the input AIN. See datasheet for pin to AIN mappings."
+				default 0
+				depends on TIVA_ADC0_SSE0_STEP6
+
+		menuconfig TIVA_ADC0_SSE0_STEP7
+			bool "Enable and configure ADC0 SSE0 step 7"
+			default n
+			depends on TIVA_ADC0_SSE0
+
+			config TIVA_ADC0_SSE0_STEP7_TS
+				bool "This step will retrieve data from the on-chip temperature sensor."
+				default n
+				depends on TIVA_ADC0_SSE0_STEP7
+
+			config TIVA_ADC0_SSE0_STEP7_AIN
+				int "Set the input AIN. See datasheet for pin to AIN mappings."
+				default 0
+				depends on TIVA_ADC0_SSE0_STEP7
+
+menuconfig TIVA_ADC0_SSE1
+	bool "Enable and configure ADC0 SSE1"
+	default n
+	---help---
+		Select this Sample Sequencer for operation. There are 0-3,4-7 possible SSEs
+		depending on how many ADC peripherals are available (4 per each ADC).
+
+		Configuration variables:
+		- trigger select
+		- priority
+		- input channel step assignment
+
+	config TIVA_ADC0_SSE1_PRIORITY
+		int "Conversion priority, must be a value from 0 to 3, no duplicates"
+		default 0
+		depends on TIVA_ADC0_SSE1
+		---help---
+			Set the conversion priority for this SSE. Each ADC has 4 SSEs so the
+			order in which they are serviced is determined by this value.
+
+	config TIVA_ADC0_SSE1_TRIGGER
+		int "Set the trigger source to start a SSE's conversion, see help for options"
+		default 0
+		depends on TIVA_ADC0_SSE1
+		---help---
+			Set the trigger source. The following values correspond to the
+			following triggers:
+			- 0x0: Processor (default)
+			- 0x1: *Analog Comparator 0
+			- 0x2: *Analog Comparator 1
+			- 0x3: *Analog Comparator 2
+			- 0x4: External (GPIO Pins)
+			- 0x5: Timer
+			- 0x6: **PWM generator 0
+			- 0x7: **PWM generator 1
+			- 0x8: **PWM generator 2
+			- 0x9: **PWM generator 3
+			- 0xE: Never Trigger
+			- 0xF: Always (continuously sample)
+
+			* Comparators are unsupported
+			** PWM triggering requires additional setup at runtime - There is a special
+			ADC IOCTL defined in the Tiva ADC driver for this purpose.
+
+		menuconfig TIVA_ADC0_SSE1_STEP0
+			bool "Enable and configure ADC0 SSE1 step 0"
+			default n
+			depends on TIVA_ADC0_SSE1
+
+			config TIVA_ADC0_SSE1_STEP0_TS
+				bool "This step will retrieve data from the on-chip temperature sensor."
+				default n
+				depends on TIVA_ADC0_SSE1_STEP0
+
+			config TIVA_ADC0_SSE1_STEP0_AIN
+				int "Set the input AIN. See datasheet for pin to AIN mappings."
+				default 0
+				depends on TIVA_ADC0_SSE1_STEP0
+
+		menuconfig TIVA_ADC0_SSE1_STEP1
+			bool "Enable and configure ADC0 SSE1 step 1"
+			default n
+			depends on TIVA_ADC0_SSE1
+
+			config TIVA_ADC0_SSE1_STEP1_TS
+				bool "This step will retrieve data from the on-chip temperature sensor."
+				default n
+				depends on TIVA_ADC0_SSE1_STEP1
+
+			config TIVA_ADC0_SSE1_STEP1_AIN
+				int "Set the input AIN. See datasheet for pin to AIN mappings."
+				default 0
+				depends on TIVA_ADC0_SSE1_STEP1
+
+		menuconfig TIVA_ADC0_SSE1_STEP2
+			bool "Enable and configure ADC0 SSE1 step 2"
+			default n
+			depends on TIVA_ADC0_SSE1
+
+			config TIVA_ADC0_SSE1_STEP2_TS
+				bool "This step will retrieve data from the on-chip temperature sensor."
+				default n
+				depends on TIVA_ADC0_SSE1_STEP2
+
+			config TIVA_ADC0_SSE1_STEP2_AIN
+				int "Set the input AIN. See datasheet for pin to AIN mappings."
+				default 0
+				depends on TIVA_ADC0_SSE1_STEP2
+
+		menuconfig TIVA_ADC0_SSE1_STEP3
+			bool "Enable and configure ADC0 SSE1 step 3"
+			default n
+			depends on TIVA_ADC0_SSE1
+
+			config TIVA_ADC0_SSE1_STEP3_TS
+				bool "This step will retrieve data from the on-chip temperature sensor."
+				default n
+				depends on TIVA_ADC0_SSE1_STEP3
+
+			config TIVA_ADC0_SSE1_STEP3_AIN
+				int "Set the input AIN. See datasheet for pin to AIN mappings."
+				default 0
+				depends on TIVA_ADC0_SSE1_STEP3
+
+menuconfig TIVA_ADC0_SSE2
+	bool "Enable and configure ADC0 SSE2"
+	default n
+	---help---
+		Select this Sample Sequencer for operation. There are 0-3,4-7 possible SSEs
+		depending on how many ADC peripherals are available (4 per each ADC).
+
+		Configuration variables:
+		- trigger select
+		- priority
+		- input channel step assignment
+
+	config TIVA_ADC0_SSE2_PRIORITY
+		int "Conversion priority, must be a value from 0 to 3, no duplicates"
+		default 0
+		depends on TIVA_ADC0_SSE2
+		---help---
+			Set the conversion priority for this SSE. Each ADC has 4 SSEs so the
+			order in which they are serviced is determined by this value.
+
+	config TIVA_ADC0_SSE2_TRIGGER
+		int "Set the trigger source to start a SSE's conversion, see help for options"
+		default 0
+		depends on TIVA_ADC0_SSE2
+		---help---
+			Set the trigger source. The following values correspond to the
+			following triggers:
+			- 0x0: Processor (default)
+			- 0x1: *Analog Comparator 0
+			- 0x2: *Analog Comparator 1
+			- 0x3: *Analog Comparator 2
+			- 0x4: External (GPIO Pins)
+			- 0x5: Timer
+			- 0x6: **PWM generator 0
+			- 0x7: **PWM generator 1
+			- 0x8: **PWM generator 2
+			- 0x9: **PWM generator 3
+			- 0xE: Never Trigger
+			- 0xF: Always (continuously sample)
+
+			* Comparators are unsupported
+			** PWM triggering requires additional setup at runtime - There is a special
+			ADC IOCTL defined in the Tiva ADC driver for this purpose.
+
+		menuconfig TIVA_ADC0_SSE2_STEP0
+			bool "Enable and configure ADC0 SSE2 step 0"
+			default n
+			depends on TIVA_ADC0_SSE2
+
+			config TIVA_ADC0_SSE2_STEP0_TS
+				bool "This step will retrieve data from the on-chip temperature sensor."
+				default n
+				depends on TIVA_ADC0_SSE2_STEP0
+
+			config TIVA_ADC0_SSE2_STEP0_AIN
+				int "Set the input AIN. See datasheet for pin to AIN mappings."
+				default 0
+				depends on TIVA_ADC0_SSE2_STEP0
+
+		menuconfig TIVA_ADC0_SSE2_STEP1
+			bool "Enable and configure ADC0 SSE2 step 1"
+			default n
+			depends on TIVA_ADC0_SSE2
+
+			config TIVA_ADC0_SSE2_STEP1_TS
+				bool "This step will retrieve data from the on-chip temperature sensor."
+				default n
+				depends on TIVA_ADC0_SSE2_STEP1
+
+			config TIVA_ADC0_SSE2_STEP1_AIN
+				int "Set the input AIN. See datasheet for pin to AIN mappings."
+				default 0
+				depends on TIVA_ADC0_SSE2_STEP1
+
+		menuconfig TIVA_ADC0_SSE2_STEP2
+			bool "Enable and configure ADC0 SSE2 step 2"
+			default n
+			depends on TIVA_ADC0_SSE2
+
+			config TIVA_ADC0_SSE2_STEP2_TS
+				bool "This step will retrieve data from the on-chip temperature sensor."
+				default n
+				depends on TIVA_ADC0_SSE2_STEP2
+
+			config TIVA_ADC0_SSE2_STEP2_AIN
+				int "Set the input AIN. See datasheet for pin to AIN mappings."
+				default 0
+				depends on TIVA_ADC0_SSE2_STEP2
+
+		menuconfig TIVA_ADC0_SSE2_STEP3
+			bool "Enable and configure ADC0 SSE2 step 3"
+			default n
+			depends on TIVA_ADC0_SSE2
+
+			config TIVA_ADC0_SSE2_STEP3_TS
+				bool "This step will retrieve data from the on-chip temperature sensor."
+				default n
+				depends on TIVA_ADC0_SSE2_STEP3
+
+			config TIVA_ADC0_SSE2_STEP3_AIN
+				int "Set the input AIN. See datasheet for pin to AIN mappings."
+				default 0
+				depends on TIVA_ADC0_SSE2_STEP3
+
+menuconfig TIVA_ADC0_SSE3
+	bool "Enable and configure ADC0 SSE3"
+	default n
+	---help---
+		Select this Sample Sequencer for operation. There are 0-3,4-7 possible SSEs
+		depending on how many ADC peripherals are available (4 per each ADC).
+
+		Configuration variables:
+		- trigger select
+		- priority
+		- input channel step assignment
+
+	config TIVA_ADC0_SSE3_PRIORITY
+		int "Conversion priority, must be a value from 0 to 3, no duplicates"
+		default 0
+		depends on TIVA_ADC0_SSE3
+		---help---
+			Set the conversion priority for this SSE. Each ADC has 4 SSEs so the
+			order in which they are serviced is determined by this value.
+
+	config TIVA_ADC0_SSE3_TRIGGER
+		int "Set the trigger source to start a SSE's conversion, see help for options"
+		default 0
+		depends on TIVA_ADC0_SSE3
+		---help---
+			Set the trigger source. The following values correspond to the
+			following triggers:
+			- 0x0: Processor (default)
+			- 0x1: *Analog Comparator 0
+			- 0x2: *Analog Comparator 1
+			- 0x3: *Analog Comparator 2
+			- 0x4: External (GPIO Pins)
+			- 0x5: Timer
+			- 0x6: **PWM generator 0
+			- 0x7: **PWM generator 1
+			- 0x8: **PWM generator 2
+			- 0x9: **PWM generator 3
+			- 0xE: Never Trigger
+			- 0xF: Always (continuously sample)
+
+			* Comparators are unsupported
+			** PWM triggering requires additional setup at runtime - There is a special
+			ADC IOCTL defined in the Tiva ADC driver for this purpose.
+
+		menuconfig TIVA_ADC0_SSE3_STEP0
+			bool "Enable and configure ADC0 SSE3 step 0"
+			default n
+			depends on TIVA_ADC0_SSE3
+
+			config TIVA_ADC0_SSE3_STEP0_TS
+				bool "This step will retrieve data from the on-chip temperature sensor."
+				default n
+				depends on TIVA_ADC0_SSE3_STEP0
+
+			config TIVA_ADC0_SSE3_STEP0_AIN
+				int "Set the input AIN. See datasheet for pin to AIN mappings."
+				default 0
+				depends on TIVA_ADC0_SSE3_STEP0
+
+endmenu # Tiva ADC0 configuration
+endif # TIVA_ADC0
+
+if TIVA_ADC1
+menu "Tiva ADC1 configuration"
+
+menuconfig TIVA_ADC1_SSE0
+	bool "Enable and configure ADC1 SSE0"
+	default n
+	---help---
+		Select this Sample Sequencer for operation. There are 0-3,4-7 possible SSEs
+		depending on how many ADC peripherals are available (4 per each ADC).
+
+		Configuration variables:
+		- trigger select
+		- priority
+		- input channel step assignment
+
+	config TIVA_ADC1_SSE0_PRIORITY
+		int "Conversion priority, must be a value from 0 to 3, no duplicates"
+		default 0
+		depends on TIVA_ADC1_SSE0
+		---help---
+			Set the conversion priority for this SSE. Each ADC has 4 SSEs so the
+			order in which they are serviced is determined by this value.
+
+	config TIVA_ADC1_SSE0_TRIGGER
+		int "Set the trigger source to start a SSE's conversion, see help for options"
+		default 0
+		depends on TIVA_ADC1_SSE0
+		---help---
+			Set the trigger source. The following values correspond to the
+			following triggers:
+			- 0x0: Processor (default)
+			- 0x1: *Analog Comparator 0
+			- 0x2: *Analog Comparator 1
+			- 0x3: *Analog Comparator 2
+			- 0x4: External (GPIO Pins)
+			- 0x5: Timer
+			- 0x6: **PWM generator 0
+			- 0x7: **PWM generator 1
+			- 0x8: **PWM generator 2
+			- 0x9: **PWM generator 3
+			- 0xE: Never Trigger
+			- 0xF: Always (continuously sample)
+
+			* Comparators are unsupported
+			** PWM triggering requires additional setup at runtime - There is a special
+			ADC IOCTL defined in the Tiva ADC driver for this purpose.
+
+		menuconfig TIVA_ADC1_SSE0_STEP0
+			bool "Enable and configure ADC1 SSE0 step 0"
+			default n
+			depends on TIVA_ADC1_SSE0
+
+			config TIVA_ADC1_SSE0_STEP0_TS
+				bool "This step will retrieve data from the on-chip temperature sensor."
+				default n
+				depends on TIVA_ADC1_SSE0_STEP0
+
+			config TIVA_ADC1_SSE0_STEP0_AIN
+				int "Set the input AIN. See datasheet for pin to AIN mappings."
+				default 0
+				depends on TIVA_ADC1_SSE0_STEP0
+
+		menuconfig TIVA_ADC1_SSE0_STEP1
+			bool "Enable and configure ADC1 SSE0 step 1"
+			default n
+			depends on TIVA_ADC1_SSE0
+
+			config TIVA_ADC1_SSE0_STEP1_TS
+				bool "This step will retrieve data from the on-chip temperature sensor."
+				default n
+				depends on TIVA_ADC1_SSE0_STEP1
+
+			config TIVA_ADC1_SSE0_STEP1_AIN
+				int "Set the input AIN. See datasheet for pin to AIN mappings."
+				default 0
+				depends on TIVA_ADC1_SSE0_STEP1
+
+		menuconfig TIVA_ADC1_SSE0_STEP2
+			bool "Enable and configure ADC1 SSE0 step 2"
+			default n
+			depends on TIVA_ADC1_SSE0
+
+			config TIVA_ADC1_SSE0_STEP2_TS
+				bool "This step will retrieve data from the on-chip temperature sensor."
+				default n
+				depends on TIVA_ADC1_SSE0_STEP2
+
+			config TIVA_ADC1_SSE0_STEP2_AIN
+				int "Set the input AIN. See datasheet for pin to AIN mappings."
+				default 0
+				depends on TIVA_ADC1_SSE0_STEP2
+
+		menuconfig TIVA_ADC1_SSE0_STEP3
+			bool "Enable and configure ADC1 SSE0 step 3"
+			default n
+			depends on TIVA_ADC1_SSE0
+
+			config TIVA_ADC1_SSE0_STEP3_TS
+				bool "This step will retrieve data from the on-chip temperature sensor."
+				default n
+				depends on TIVA_ADC1_SSE0_STEP3
+
+			config TIVA_ADC1_SSE0_STEP3_AIN
+				int "Set the input AIN. See datasheet for pin to AIN mappings."
+				default 0
+				depends on TIVA_ADC1_SSE0_STEP3
+
+		menuconfig TIVA_ADC1_SSE0_STEP4
+			bool "Enable and configure ADC1 SSE0 step 4"
+			default n
+			depends on TIVA_ADC1_SSE0
+
+			config TIVA_ADC1_SSE0_STEP4_TS
+				bool "This step will retrieve data from the on-chip temperature sensor."
+				default n
+				depends on TIVA_ADC1_SSE0_STEP4
+
+			config TIVA_ADC1_SSE0_STEP4_AIN
+				int "Set the input AIN. See datasheet for pin to AIN mappings."
+				default 0
+				depends on TIVA_ADC1_SSE0_STEP4
+
+		menuconfig TIVA_ADC1_SSE0_STEP5
+			bool "Enable and configure ADC1 SSE0 step 5"
+			default n
+			depends on TIVA_ADC1_SSE0
+
+			config TIVA_ADC1_SSE0_STEP5_TS
+				bool "This step will retrieve data from the on-chip temperature sensor."
+				default n
+				depends on TIVA_ADC1_SSE0_STEP5
+
+			config TIVA_ADC1_SSE0_STEP5_AIN
+				int "Set the input AIN. See datasheet for pin to AIN mappings."
+				default 0
+				depends on TIVA_ADC1_SSE0_STEP5
+
+		menuconfig TIVA_ADC1_SSE0_STEP6
+			bool "Enable and configure ADC1 SSE0 step 6"
+			default n
+			depends on TIVA_ADC1_SSE0
+
+			config TIVA_ADC1_SSE0_STEP6_TS
+				bool "This step will retrieve data from the on-chip temperature sensor."
+				default n
+				depends on TIVA_ADC1_SSE0_STEP6
+
+			config TIVA_ADC1_SSE0_STEP6_AIN
+				int "Set the input AIN. See datasheet for pin to AIN mappings."
+				default 0
+				depends on TIVA_ADC1_SSE0_STEP6
+
+		menuconfig TIVA_ADC1_SSE0_STEP7
+			bool "Enable and configure ADC1 SSE0 step 7"
+			default n
+			depends on TIVA_ADC1_SSE0
+
+			config TIVA_ADC1_SSE0_STEP7_TS
+				bool "This step will retrieve data from the on-chip temperature sensor."
+				default n
+				depends on TIVA_ADC1_SSE0_STEP7
+
+			config TIVA_ADC1_SSE0_STEP7_AIN
+				int "Set the input AIN. See datasheet for pin to AIN mappings."
+				default 0
+				depends on TIVA_ADC1_SSE0_STEP7
+
+menuconfig TIVA_ADC1_SSE1
+	bool "Enable and configure ADC1 SSE1"
+	default n
+	---help---
+		Select this Sample Sequencer for operation. There are 0-3,4-7 possible SSEs
+		depending on how many ADC peripherals are available (4 per each ADC).
+
+		Configuration variables:
+		- trigger select
+		- priority
+		- input channel step assignment
+
+	config TIVA_ADC1_SSE1_PRIORITY
+		int "Conversion priority, must be a value from 0 to 3, no duplicates"
+		default 0
+		depends on TIVA_ADC1_SSE1
+		---help---
+			Set the conversion priority for this SSE. Each ADC has 4 SSEs so the
+			order in which they are serviced is determined by this value.
+
+	config TIVA_ADC1_SSE1_TRIGGER
+		int "Set the trigger source to start a SSE's conversion, see help for options"
+		default 0
+		depends on TIVA_ADC1_SSE1
+		---help---
+			Set the trigger source. The following values correspond to the
+			following triggers:
+			- 0x0: Processor (default)
+			- 0x1: *Analog Comparator 0
+			- 0x2: *Analog Comparator 1
+			- 0x3: *Analog Comparator 2
+			- 0x4: External (GPIO Pins)
+			- 0x5: Timer
+			- 0x6: **PWM generator 0
+			- 0x7: **PWM generator 1
+			- 0x8: **PWM generator 2
+			- 0x9: **PWM generator 3
+			- 0xE: Never Trigger
+			- 0xF: Always (continuously sample)
+
+			* Comparators are unsupported
+			** PWM triggering requires additional setup at runtime - There is a special
+			ADC IOCTL defined in the Tiva ADC driver for this purpose.
+
+		menuconfig TIVA_ADC1_SSE1_STEP0
+			bool "Enable and configure ADC1 SSE1 step 0"
+			default n
+			depends on TIVA_ADC1_SSE1
+
+			config TIVA_ADC1_SSE1_STEP0_TS
+				bool "This step will retrieve data from the on-chip temperature sensor."
+				default n
+				depends on TIVA_ADC1_SSE1_STEP0
+
+			config TIVA_ADC1_SSE1_STEP0_AIN
+				int "Set the input AIN. See datasheet for pin to AIN mappings."
+				default 0
+				depends on TIVA_ADC1_SSE1_STEP0
+
+		menuconfig TIVA_ADC1_SSE1_STEP1
+			bool "Enable and configure ADC1 SSE1 step 1"
+			default n
+			depends on TIVA_ADC1_SSE1
+
+			config TIVA_ADC1_SSE1_STEP1_TS
+				bool "This step will retrieve data from the on-chip temperature sensor."
+				default n
+				depends on TIVA_ADC1_SSE1_STEP1
+
+			config TIVA_ADC1_SSE1_STEP1_AIN
+				int "Set the input AIN. See datasheet for pin to AIN mappings."
+				default 0
+				depends on TIVA_ADC1_SSE1_STEP1
+
+		menuconfig TIVA_ADC1_SSE1_STEP2
+			bool "Enable and configure ADC1 SSE1 step 2"
+			default n
+			depends on TIVA_ADC1_SSE1
+
+			config TIVA_ADC1_SSE1_STEP2_TS
+				bool "This step will retrieve data from the on-chip temperature sensor."
+				default n
+				depends on TIVA_ADC1_SSE1_STEP2
+
+			config TIVA_ADC1_SSE1_STEP2_AIN
+				int "Set the input AIN. See datasheet for pin to AIN mappings."
+				default 0
+				depends on TIVA_ADC1_SSE1_STEP2
+
+		menuconfig TIVA_ADC1_SSE1_STEP3
+			bool "Enable and configure ADC1 SSE1 step 3"
+			default n
+			depends on TIVA_ADC1_SSE1
+
+			config TIVA_ADC1_SSE1_STEP3_TS
+				bool "This step will retrieve data from the on-chip temperature sensor."
+				default n
+				depends on TIVA_ADC1_SSE1_STEP3
+
+			config TIVA_ADC1_SSE1_STEP3_AIN
+				int "Set the input AIN. See datasheet for pin to AIN mappings."
+				default 0
+				depends on TIVA_ADC1_SSE1_STEP3
+
+menuconfig TIVA_ADC1_SSE2
+	bool "Enable and configure ADC1 SSE2"
+	default n
+	---help---
+		Select this Sample Sequencer for operation. There are 0-3,4-7 possible SSEs
+		depending on how many ADC peripherals are available (4 per each ADC).
+
+		Configuration variables:
+		- trigger select
+		- priority
+		- input channel step assignment
+
+	config TIVA_ADC1_SSE2_PRIORITY
+		int "Conversion priority, must be a value from 0 to 3, no duplicates"
+		default 0
+		depends on TIVA_ADC1_SSE2
+		---help---
+			Set the conversion priority for this SSE. Each ADC has 4 SSEs so the
+			order in which they are serviced is determined by this value.
+
+	config TIVA_ADC1_SSE2_TRIGGER
+		int "Set the trigger source to start a SSE's conversion, see help for options"
+		default 0
+		range 0 15
+		depends on TIVA_ADC1_SSE2
+		---help---
+			Set the trigger source. The following values correspond to the
+			following triggers:
+			- 0x0: Processor (default)
+			- 0x1: *Analog Comparator 0
+			- 0x2: *Analog Comparator 1
+			- 0x3: *Analog Comparator 2
+			- 0x4: External (GPIO Pins)
+			- 0x5: Timer
+			- 0x6: **PWM generator 0
+			- 0x7: **PWM generator 1
+			- 0x8: **PWM generator 2
+			- 0x9: **PWM generator 3
+			- 0xE: Never Trigger
+			- 0xF: Always (continuously sample)
+
+			* Comparators are unsupported
+			** PWM triggering requires additional setup at runtime - There is a special
+			ADC IOCTL defined in the Tiva ADC driver for this purpose.
+
+		menuconfig TIVA_ADC1_SSE2_STEP0
+			bool "Enable and configure ADC1 SSE2 step 0"
+			default n
+			depends on TIVA_ADC1_SSE2
+
+			config TIVA_ADC1_SSE2_STEP0_TS
+				bool "This step will retrieve data from the on-chip temperature sensor."
+				default n
+				depends on TIVA_ADC1_SSE2_STEP0
+
+			config TIVA_ADC1_SSE2_STEP0_AIN
+				int "Set the input AIN. See datasheet for pin to AIN mappings."
+				default 0
+				depends on TIVA_ADC1_SSE2_STEP0
+
+		menuconfig TIVA_ADC1_SSE2_STEP1
+			bool "Enable and configure ADC1 SSE2 step 1"
+			default n
+			depends on TIVA_ADC1_SSE2
+
+			config TIVA_ADC1_SSE2_STEP1_TS
+				bool "This step will retrieve data from the on-chip temperature sensor."
+				default n
+				depends on TIVA_ADC1_SSE2_STEP1
+
+			config TIVA_ADC1_SSE2_STEP1_AIN
+				int "Set the input AIN. See datasheet for pin to AIN mappings."
+				default 0
+				depends on TIVA_ADC1_SSE2_STEP1
+
+		menuconfig TIVA_ADC1_SSE2_STEP2
+			bool "Enable and configure ADC1 SSE2 step 2"
+			default n
+			depends on TIVA_ADC1_SSE2
+
+			config TIVA_ADC1_SSE2_STEP2_TS
+				bool "This step will retrieve data from the on-chip temperature sensor."
+				default n
+				depends on TIVA_ADC1_SSE2_STEP2
+
+			config TIVA_ADC1_SSE2_STEP2_AIN
+				int "Set the input AIN. See datasheet for pin to AIN mappings."
+				default 0
+				depends on TIVA_ADC1_SSE2_STEP2
+
+		menuconfig TIVA_ADC1_SSE2_STEP3
+			bool "Enable and configure ADC1 SSE2 step 3"
+			default n
+			depends on TIVA_ADC1_SSE2
+
+			config TIVA_ADC1_SSE2_STEP3_TS
+				bool "This step will retrieve data from the on-chip temperature sensor."
+				default n
+				depends on TIVA_ADC1_SSE2_STEP3
+
+			config TIVA_ADC1_SSE2_STEP3_AIN
+				int "Set the input AIN. See datasheet for pin to AIN mappings."
+				default 0
+				depends on TIVA_ADC1_SSE2_STEP3
+
+menuconfig TIVA_ADC1_SSE3
+	bool "Enable and configure ADC1 SSE3"
+	default n
+	---help---
+		Select this Sample Sequencer for operation. There are 0-3,4-7 possible SSEs
+		depending on how many ADC peripherals are available (4 per each ADC).
+
+		Configuration variables:
+		- trigger select
+		- priority
+		- input channel step assignment
+
+	config TIVA_ADC1_SSE3_PRIORITY
+		int "Conversion priority, must be a value from 0 to 3, no duplicates"
+		default 0
+		depends on TIVA_ADC1_SSE3
+		---help---
+			Set the conversion priority for this SSE. Each ADC has 4 SSEs so the
+			order in which they are serviced is determined by this value.
+
+	config TIVA_ADC1_SSE3_TRIGGER
+		int "Set the trigger source to start a SSE's conversion, see help for options"
+		default 0
+		depends on TIVA_ADC1_SSE3
+		---help---
+			Set the trigger source. The following values correspond to the
+			following triggers:
+			- 0x0: Processor (default)
+			- 0x1: *Analog Comparator 0
+			- 0x2: *Analog Comparator 1
+			- 0x3: *Analog Comparator 2
+			- 0x4: External (GPIO Pins)
+			- 0x5: Timer
+			- 0x6: **PWM generator 0
+			- 0x7: **PWM generator 1
+			- 0x8: **PWM generator 2
+			- 0x9: **PWM generator 3
+			- 0xE: Never Trigger
+			- 0xF: Always (continuously sample)
+
+			* Comparators are unsupported
+			** PWM triggering requires additional setup at runtime - There is a special
+			ADC IOCTL defined in the Tiva ADC driver for this purpose.
+
+		menuconfig TIVA_ADC1_SSE3_STEP0
+			bool "Enable and configure ADC1 SSE3 step 0"
+			default n
+			depends on TIVA_ADC1_SSE3
+
+			config TIVA_ADC1_SSE3_STEP0_TS
+				bool "This step will retrieve data from the on-chip temperature sensor."
+				default n
+				depends on TIVA_ADC1_SSE3_STEP0
+
+			config TIVA_ADC1_SSE3_STEP0_AIN
+				int "Set the input AIN. See datasheet for pin to AIN mappings."
+				default 0
+				depends on TIVA_ADC1_SSE3_STEP0
+
+endmenu # Tiva ADC1 configuration
+endif # TIVA_ADC1
+
+config TIVA_ADC_REGDEBUG
+	bool "Register level debug"
+	default n
+	depends on DEBUG
+	---help---
+		Enables extremely detailed register access debug output.
+
+endmenu # Tiva ADC Configuration
+endif # TIVA_ADC
+
 if TIVA_ETHERNET
 
 menu "Stellaris Ethernet Configuration"