Easing in binfmt support

git-svn-id: svn://svn.code.sf.net/p/nuttx/code/trunk@1892 42af7a65-404d-4744-a932-0658087f49c3

15 files changed, 981 insertions, 619 deletions

diff --git a/nuttx/binfmt/Makefile b/nuttx/binfmt/Makefile
index 0e3d9720c..deb6879a9 100644
--- a/nuttx/binfmt/Makefile
+++ b/nuttx/binfmt/Makefile
@@ -42,7 +42,7 @@ SUBDIRS		= libnxflat
 ASRCS		= $(LIBNXFLAT_ASRCS)
 AOBJS		= $(ASRCS:.S=$(OBJEXT))
 
-CSRCS		= $(LIBNXFLAT_CSRCS)
+CSRCS		= nxflat.c $(LIBNXFLAT_CSRCS)
 COBJS		= $(CSRCS:.c=$(OBJEXT))
 
 SRCS		= $(ASRCS) $(CSRCS)
diff --git a/nuttx/binfmt/libnxflat/Make.defs b/nuttx/binfmt/libnxflat/Make.defs
index 96cff471d..21d00f7f1 100644
--- a/nuttx/binfmt/libnxflat/Make.defs
+++ b/nuttx/binfmt/libnxflat/Make.defs
@@ -34,4 +34,5 @@
 ############################################################################
 
 LIBNXFLAT_ASRCS =
-LIBNXFLAT_CSRCS = libnxflat_load.c libnxflat_stack.c libnxflat_verify.c
+LIBNXFLAT_CSRCS = libnxflat_init.c libnxflat_uninit.c libnxflat_load.c \
+		  libnxflat_unload.c libnxflat_verify.c libnxflat_read.c
diff --git a/nuttx/binfmt/libnxflat/libnxflat_init.c b/nuttx/binfmt/libnxflat/libnxflat_init.c
new file mode 100644
index 000000000..4696d491a
--- /dev/null
+++ b/nuttx/binfmt/libnxflat/libnxflat_init.c
@@ -0,0 +1,170 @@
+/****************************************************************************
+ * binfmt/libnxflat/libnxflat_init.c
+ *
+ *   Copyright (C) 2009 Gregory Nutt. All rights reserved.
+ *   Author: Gregory Nutt <spudmonkey@racsa.co.cr>
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions
+ * are met:
+ *
+ * 1. Redistributions of source code must retain the above copyright
+ *    notice, this list of conditions and the following disclaimer.
+ * 2. Redistributions in binary form must reproduce the above copyright
+ *    notice, this list of conditions and the following disclaimer in
+ *    the documentation and/or other materials provided with the
+ *    distribution.
+ * 3. Neither the name NuttX nor the names of its contributors may be
+ *    used to endorse or promote products derived from this software
+ *    without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
+ * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
+ * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
+ * FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE
+ * COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
+ * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING,
+ * BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS
+ * OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED
+ * AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
+ * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
+ * ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
+ * POSSIBILITY OF SUCH DAMAGE.
+ *
+ ****************************************************************************/
+
+/****************************************************************************
+ * Included Files
+ ****************************************************************************/
+
+#include <nuttx/config.h>
+#include <sys/types.h>
+#include <sys/stat.h>
+
+#include <string.h>
+#include <fcntl.h>
+#include <nxflat.h>
+#include <debug.h>
+#include <errno.h>
+
+#include <arpa/inet.h>
+#include <nuttx/nxflat.h>
+
+/****************************************************************************
+ * Pre-Processor Definitions
+ ****************************************************************************/
+
+/****************************************************************************
+ * Private Constant Data
+ ****************************************************************************/
+
+/****************************************************************************
+ * Private Functions
+ ****************************************************************************/
+
+/****************************************************************************
+ * Public Functions
+ ****************************************************************************/
+
+/****************************************************************************
+ * Name: nxflat_init
+ ****************************************************************************/
+
+int nxflat_init(const char *filename, struct nxflat_hdr_s *header,
+                struct nxflat_loadinfo_s *loadinfo)
+{
+  uint32  datastart;
+  uint32  dataend;
+  uint32  bssstart;
+  uint32  bssend;
+  int     ret;
+
+  bvdbg("filename: %s header: %p loadinfo: %p\n", filename, header, loadinfo);
+
+  /* Clear the load info structure */
+
+  memset(loadinfo, 0, sizeof(struct nxflat_loadinfo_s));
+
+  /* Open the binary file */
+
+  loadinfo->filfd = open(filename, O_RDONLY);
+  if (loadinfo->filfd < 0)
+    {
+      bdbg("Failed to open NXFLAT binary %s: %d\n", filename, ret);
+      return -errno;      
+    }
+
+  /* Read the NXFLAT header from offset 0 */
+
+  ret = nxflat_read(loadinfo, (char*)&header, sizeof(struct nxflat_hdr_s), 0);
+  if (ret < 0)
+    {
+      bdbg("Failed to read NXFLAT header: %d\n", ret);
+      return ret;
+    }
+       
+  /* Verify the NXFLAT header */
+
+  if (nxflat_verifyheader(header) != 0)
+    {
+      /* This is not an error because we will be called to attempt loading
+       * EVERY binary.  Returning -ENOEXEC simply informs the system that
+       * the file is not an NXFLAT file.  Besides, if there is something worth
+       * complaining about, nnxflat_verifyheader() has already
+       * done so.
+       */
+
+      bdbg("Bad NXFLAT header\n");
+      return -ENOEXEC;
+    }
+
+  /* Save all of the input values in the loadinfo structure */
+
+  loadinfo->header     = header;
+
+  /* And extract some additional information from the xflat
+   * header.  Note that the information in the xflat header is in
+   * network order.
+   */
+
+  datastart             = ntohl(header->h_datastart);
+  dataend               = ntohl(header->h_dataend);
+  bssstart              = dataend;
+  bssend                = ntohl(header->h_bssend);
+
+  /* And put this information into the loadinfo structure as well.
+   *
+   * Note that:
+   *
+   *   ispace_size = the address range from 0 up to datastart.
+   *   data_size   = the address range from datastart up to dataend
+   *   bss_size    = the address range from dataend up to bssend.
+   */
+
+  loadinfo->entry_offset = ntohl(header->h_entry);
+  loadinfo->ispace_size  = datastart;
+
+  loadinfo->data_size    = dataend - datastart;
+  loadinfo->bss_size     = bssend - dataend;
+  loadinfo->stack_size   = ntohl(header->h_stacksize);
+
+  /* This is the initial dspace size.  We'll recaculate this later
+   * after the memory has been allocated.  So that the caller can feel
+   * free to modify dspace_size values from now until then.
+   */
+
+  loadinfo->dspace_size  =      /* Total DSpace Size is: */
+    (NXFLAT_DATA_OFFSET +         /*   Memory set aside for ldso */
+     bssend - datastart +      /*   Data and bss segment sizes */
+     loadinfo->stack_size);     /*   (Current) stack size */
+
+  /* Get the offset to the start of the relocations (we'll relocate
+   * this later).
+   */
+
+  loadinfo->reloc_start  = ntohl(header->h_relocstart);
+  loadinfo->reloc_count  = ntohl(header->h_reloccount);
+
+  return 0;
+}
+
diff --git a/nuttx/binfmt/libnxflat/libnxflat_load.c b/nuttx/binfmt/libnxflat/libnxflat_load.c
index d456ae3a1..0b143dad4 100644
--- a/nuttx/binfmt/libnxflat/libnxflat_load.c
+++ b/nuttx/binfmt/libnxflat/libnxflat_load.c
@@ -1,5 +1,5 @@
 /****************************************************************************
- * libnxflat/lib/libnxflat_load.c
+ * binfmt/libnxflat/libnxflat_load.c
  *
  *   Copyright (C) 2009 Gregory Nutt. All rights reserved.
  *   Author: Gregory Nutt <spudmonkey@racsa.co.cr>
@@ -39,10 +39,14 @@
 
 #include <nuttx/config.h>
 #include <sys/types.h>
+#include <sys/mman.h>
+
+#include <stdlib.h>
 #include <string.h>
 #include <nxflat.h>
 #include <debug.h>
 #include <errno.h>
+
 #include <arpa/inet.h>
 #include <nuttx/nxflat.h>
 
@@ -50,16 +54,6 @@
  * Pre-Processor Definitions
  ****************************************************************************/
 
-#define V_MAP   (load_info->vtbl->map)
-#define V_UNMAP (load_info->vtbl->unmap)
-#define V_ALLOC (load_info->vtbl->alloc)
-#define V_FREE  (load_info->vtbl->free)
-#define V_OPEN  (load_info->vtbl->open)
-#define V_READ  (load_info->vtbl->read)
-#define V_CLOSE (load_info->vtbl->close)
-
-#define NXFLAT_HDR_SIZE sizeof(struct nxflat_hdr_s)
-
 #ifndef MAX
 #define MAX(x,y) ((x) > (y) ? (x) : (y))
 #endif
@@ -68,18 +62,18 @@
  * Private Constant Data
  ****************************************************************************/
 
-#ifdef CONFIG_NXFLAT_DEBUG
-static const char text_segment[] = "TEXT";
-static const char data_segment[] = "DATA";
-static const char bss_segment[]  = "BSS";
-static const char unknown[]      = "UNKNOWN";
+#if defined(CONFIG_DEBUG_VERBOSE) && defined(CONFIG_DEBUG_BINFMT)
+static const char g_textsegment[] = "TEXT";
+static const char g_datasegment[] = "DATA";
+static const char g_bsssegment[]  = "BSS";
+static const char g_unksegment[]  = "UNKNOWN";
 
-static const char *segment[] =
+static const char *g_segment[] =
 {
-  text_segment,
-  data_segment,
-  bss_segment,
-  unknown
+  g_textsegment,
+  g_datasegment,
+  g_bsssegment,
+  g_unksegment
 };
 #endif
 
@@ -88,26 +82,10 @@ static const char *segment[] =
  ****************************************************************************/
 
 /****************************************************************************
- * Name: nxflat_swap32
- ****************************************************************************/
-
-#ifdef __BIG_ENDIAN
-static inline uint32 nxflat_swap32(uint32 little)
-{
-    uint32 big =
-	((little >> 24) & 0xff) | 
-	(((little >> 16) & 0xff) << 8) |
-	(((little >> 8) & 0xff) << 16) |
-	((little & 0xff) << 24);
-    return big;
-}
-#endif
-
-/****************************************************************************
  * Name: nxflat_reloc
  ****************************************************************************/
 
-static void nxflat_reloc(struct nxflat_loadinfo_s *load_info, uint32 rl)
+static void nxflat_reloc(struct nxflat_loadinfo_s *loadinfo, uint32 rl)
 {
   union
   {
@@ -128,16 +106,16 @@ static void nxflat_reloc(struct nxflat_loadinfo_s *load_info, uint32 rl)
    * section of the file image.
    */
 
-  if (reloc.s.r_offset > load_info->data_size)
+  if (reloc.s.r_offset > loadinfo->data_size)
     {
-      dbg("ERROR: Relocation at 0x%08x invalid -- "
+      bdbg("ERROR: Relocation at 0x%08x invalid -- "
 	  "does not lie in the data segment, size=0x%08x\n",
-	  reloc.s.r_offset, load_info->data_size);
-      dbg("       Relocation not performed!\n");
+	  reloc.s.r_offset, loadinfo->data_size);
+      bdbg("       Relocation not performed!\n");
     }
   else if ((reloc.s.r_offset & 0x00000003) != 0)
     {
-      dbg("ERROR: Relocation at 0x%08x invalid -- "
+      bdbg("ERROR: Relocation at 0x%08x invalid -- "
 	  "Improperly aligned\n",
 	  reloc.s.r_offset);
     }
@@ -148,7 +126,7 @@ static void nxflat_reloc(struct nxflat_loadinfo_s *load_info, uint32 rl)
        * DSpace to hold information needed by ld.so at run time.
        */
 
-      datastart = load_info->dspace + NXFLAT_DATA_OFFSET;
+      datastart = loadinfo->dspace + NXFLAT_DATA_OFFSET;
 
       /* Get a pointer to the value that needs relocation in
        * DSpace.
@@ -156,18 +134,18 @@ static void nxflat_reloc(struct nxflat_loadinfo_s *load_info, uint32 rl)
       
       ptr = (uint32*)(datastart + reloc.s.r_offset);
 
-      vdbg("Relocation of variable at DATASEG+0x%08x "
+      bvdbg("Relocation of variable at DATASEG+0x%08x "
 	  "(address 0x%p, currently 0x%08x) into segment %s\n",
-	  reloc.s.r_offset, ptr, *ptr, segment[reloc.s.r_type]);
+	  reloc.s.r_offset, ptr, *ptr, g_segment[reloc.s.r_type]);
 	
       switch (reloc.s.r_type)
 	{
-	  /* TEXT is located at an offset of NXFLAT_HDR_SIZE from
+	  /* TEXT is located at an offset of sizeof(struct nxflat_hdr_s) from
 	   * the allocated/mapped ISpace region.
 	   */
 
 	case NXFLAT_RELOC_TYPE_TEXT:
-	  *ptr += load_info->ispace + NXFLAT_HDR_SIZE;
+	  *ptr += loadinfo->ispace + sizeof(struct nxflat_hdr_s);
 	  break;
 
 	  /* DATA and BSS are always contiguous regions.  DATA
@@ -179,7 +157,7 @@ static void nxflat_reloc(struct nxflat_loadinfo_s *load_info, uint32 rl)
 	   * In other contexts, is it necessary to add the data_size
 	   * to get the BSS offset like:
 	   *
-	   *   *ptr += datastart + load_info->data_size;
+	   *   *ptr += datastart + loadinfo->data_size;
 	   */
 
 	case NXFLAT_RELOC_TYPE_DATA:
@@ -192,15 +170,15 @@ static void nxflat_reloc(struct nxflat_loadinfo_s *load_info, uint32 rl)
 	   */
 
 	case NXFLAT_RELOC_TYPE_NONE:
-	  dbg("NULL relocation!\n");
+	  bdbg("NULL relocation!\n");
 	  break;
 
 	default:
-	  dbg("ERROR: Unknown relocation type=%d\n", reloc.s.r_type);
+	  bdbg("ERROR: Unknown relocation type=%d\n", reloc.s.r_type);
 	  break;
 	}
 
-      vdbg("Relocation became 0x%08x\n", *ptr);
+      bvdbg("Relocation became 0x%08x\n", *ptr);
     }
 }
 
@@ -209,235 +187,118 @@ static void nxflat_reloc(struct nxflat_loadinfo_s *load_info, uint32 rl)
  ****************************************************************************/
 
 /****************************************************************************
- * Name: nxflat_init
- ****************************************************************************/
-
-int nxflat_init(bin_handle_t bin_handle,  file_handle_t file_handle,
-	        const struct nxflat_hdr_s *header,  const struct nxflat_vtbl_s *vtbl,
-	        struct nxflat_loadinfo_s *load_info)
-{
-  uint32  datastart;
-  uint32  dataend;
-  uint32  bssstart;
-  uint32  bssend;
-
-  vdbg("bin_handle=0x%p header=0x%p load_info=0x%p\n",
-      bin_handle, header, load_info);
-
-  /* Clear the load info structure */
-
-  memset(load_info, 0, sizeof(struct nxflat_loadinfo_s));
-
-  /* Verify the xFLT header */
-
-  if (nxflat_verifyheader(header) != 0)
-    {
-      /* This is not an error because we will be called
-       * to attempt loading EVERY binary.  Returning -ENOEXEC
-       * simply informs the system that the file is not
-       * an xFLT file.  Besides, if there is something worth
-       * complaining about, nnxflat_verifyheader() has already
-       * done so.
-       */
-
-      dbg("Bad xFLT header\n");
-      return -ENOEXEC;
-    }
-
-  /* Save all of the input values in the load_info structure */
-
-  load_info->bin_handle  = bin_handle;
-  load_info->file_handle = file_handle;
-  load_info->header      = header;
-  load_info->vtbl        = vtbl;
-
-  /* And extract some additional information from the xflat
-   * header.  Note that the information in the xflat header is in
-   * network order.
-   */
-
-  datastart             = ntohl(header->h_datastart);
-  dataend               = ntohl(header->h_dataend);
-  bssstart              = dataend;
-  bssend                = ntohl(header->h_bssend);
-
-  /* And put this information into the load_info structure as well.
-   *
-   * Note that:
-   *
-   *   ispace_size = the address range from 0 up to datastart.
-   *   data_size   = the address range from datastart up to dataend
-   *   bss_size    = the address range from dataend up to bssend.
-   */
-
-  load_info->entry_offset = ntohl(header->h_entry);
-  load_info->ispace_size  = datastart;
-
-  load_info->data_size    = dataend - datastart;
-  load_info->bss_size     = bssend - dataend;
-  load_info->stack_size   = ntohl(header->h_stacksize);
-
-  /* This is the initial dspace size.  We'll recaculate this later
-   * after the memory has been allocated.  So that the caller can feel
-   * free to modify dspace_size values from now until then.
-   */
-
-  load_info->dspace_size  =      /* Total DSpace Size is: */
-    (NXFLAT_DATA_OFFSET +         /*   Memory set aside for ldso */
-     bssend - datastart +      /*   Data and bss segment sizes */
-     load_info->stack_size);     /*   (Current) stack size */
-
-  /* Get the offset to the start of the relocations (we'll relocate
-   * this later).
-   */
-
-  load_info->reloc_start  = ntohl(header->h_relocstart);
-  load_info->reloc_count  = ntohl(header->h_reloccount);
-
-  return 0;
-}
-
-/****************************************************************************
- * Name: nxflat_uninit
- ****************************************************************************/
-
-int nxflat_uninit(struct nxflat_loadinfo_s *load_info)
-{
-  if (load_info->file_handle)
-    {
-      V_CLOSE(load_info->file_handle);
-    }
-  return 0;
-}
-		      
-/****************************************************************************
  * Name: nxflat_load
  ****************************************************************************/
 
-int nxflat_load(struct nxflat_loadinfo_s *load_info)
+int nxflat_load(struct nxflat_loadinfo_s *loadinfo)
 {
-  uint32 dspace_read_size;
-  uint32 data_offset;
-  uint32 *reloc_tab;
-  uint32 result;
-  int           i;
-
-  /* Calculate the extra space we need to map in.  This region
-   * will be the BSS segment and the stack.  It will also be used
-   * temporarily to hold relocation information.  So the size of this
-   * region will either be the size of the BSS section and the
-   * stack OR, it the size of the relocation entries, whichever
-   * is larger
+  off_t   doffset;     /* Offset to .data in the NXFLAT file */
+  uint32 *reloctab;    /* Address of the relocation table */
+  uint32  dreadsize;   /* Total number of bytes of .data to be read */
+  uint32  ret;
+  int     i;
+
+  /* Calculate the extra space we need to map in.  This region will be the
+   * BSS segment and the stack.  It will also be used temporarily to hold
+   * relocation information.  So the size of this region will either be the
+   * size of the BSS section and the stack OR, it the size of the relocation
+   * entries, whichever is larger
    */
 
   {
-    uint32 extra_alloc;
-    uint32 reloc_size;
+    uint32 relocsize;
+    uint32 extrasize;
 
-    /* This is the amount of memory that we have to have to hold
-     * the relocations.
+    /* This is the amount of memory that we have to have to hold the
+     * relocations.
      */
 
-    reloc_size  = load_info->reloc_count * sizeof(uint32);
+    relocsize  = loadinfo->reloc_count * sizeof(uint32);
 
-    /* In the file, the relocations should lie at the same offset
-     * as BSS.  The additional amount that we allocate have to
-     * be either (1) the BSS size + the stack size, or (2) the
-     * size of the relocation records, whicher is larger.
+    /* In the file, the relocations should lie at the same offset as BSS.
+     * The additional amount that we allocate have to be either (1) the
+     * BSS size + the stack size, or (2) the size of the relocation records,
+     * whicher is larger.
      */
 
-    extra_alloc = MAX(load_info->bss_size + load_info->stack_size,
-		      reloc_size);
+    extrasize = MAX(loadinfo->bss_size + loadinfo->stack_size, relocsize);
 
-    /* Use this addtional amount to adjust the total size of the
-     * dspace region. */
+    /* Use this addtional amount to adjust the total size of the dspace
+     * region.
+     */
 
-    load_info->dspace_size =
+    loadinfo->dspace_size =
       NXFLAT_DATA_OFFSET +      /* Memory used by ldso */
-      load_info->data_size +   /* Initialized data */
-      extra_alloc;             /* bss+stack/relocs */
+      loadinfo->data_size +    /* Initialized data */
+      extrasize;                /* bss+stack/relocs */
 
-    /* The number of bytes of data that we have to read from the
-     * file is the data size plus the size of the relocation table.
+    /* The number of bytes of data that we have to read from the file is
+     * the data size plus the size of the relocation table.
      */
 
-    dspace_read_size = load_info->data_size + reloc_size;
+    dreadsize = loadinfo->data_size + relocsize;
   }
 
   /* We'll need this a few times as well. */
 
-  data_offset = load_info->ispace_size;
+  doffset = loadinfo->ispace_size;
 
-  /* We will make two mmap calls create an address space for
-   * the executable.  We will attempt to map the file to get
-   * the ISpace address space and to allocate RAM to get the
-   * DSpace address space.  If the system does not support
-   * file mapping, the V_MAP() implementation should do the
+  /* We will make two mmap calls create an address space for the executable.
+   * We will attempt to map the file to get the ISpace address space and
+   * to allocate RAM to get the DSpace address space.  If the filesystem does
+   * not support file mapping, the map() implementation should do the
    * right thing.
    */
 
-  /* The following call will give as a pointer to the mapped
-   * file ISpace.  This may be in ROM, RAM, Flash, ...
-   * We don't really care where the memory resides as long
-   * as it is fully initialized and ready to execute.
-   * However, the memory should be share-able between processes;
-   * otherwise, we don't really have shared libraries.
+  /* The following call will give as a pointer to the mapped file ISpace.
+   * This may be in ROM, RAM, Flash, ... We don't really care where the memory
+   * resides as long as it is fully initialized and ready to execute.
    */
 
-  load_info->ispace = (uint32)V_MAP(load_info->file_handle,
-				       load_info->ispace_size);
-      
-  if (load_info->ispace >= (uint32) -4096)
+  loadinfo->ispace = (uint32)mmap(NULL, loadinfo->ispace_size, PROT_READ,
+                                  MAP_SHARED|MAP_FILE, loadinfo->filfd, 0);
+  if (loadinfo->ispace == (uint32)MAP_FAILED)
     {
-      dbg("Failed to map xFLT ISpace, error=%d\n", -load_info->ispace);
-      return load_info->ispace;
+      bdbg("Failed to map NXFLAT ISpace: %d\n", errno);
+      return -errno;
     }
 
-  vdbg("Mapped ISpace (%d bytes) at 0x%08x\n",
-      load_info->ispace_size, load_info->ispace);
+  bvdbg("Mapped ISpace (%d bytes) at 0x%08x\n",
+      loadinfo->ispace_size, loadinfo->ispace);
 
-  /* The following call will give a pointer to the allocated
-   * but uninitialized ISpace memory.
+  /* The following call will give a pointer to the allocated but
+   * uninitialized ISpace memory.
    */
 
-  load_info->dspace = (uint32)V_ALLOC(load_info->dspace_size);
-
-  if (load_info->dspace >= (uint32) -4096)
+  loadinfo->dspace = (uint32)malloc(loadinfo->dspace_size);
+  if (loadinfo->dspace == 0)
     {
-      dbg("Failed to allocate DSpace, error=%d\n",
-	  -load_info->ispace);
-      (void)nxflat_unload(load_info);
-      return load_info->ispace;
+      bdbg("Failed to allocate DSpace\n");
+      ret = -ENOMEM;
+      goto errout;
     }
 
-  vdbg("Allocated DSpace (%d bytes) at 0x%08x\n",
-      load_info->dspace_size, load_info->dspace);
+  bvdbg("Allocated DSpace (%d bytes) at %08x\n",
+      loadinfo->dspace_size, loadinfo->dspace);
 
-  /* Now, read the data into allocated DSpace at an offset into
-   * the allocated DSpace memory.  This offset provides a small
-   * amount of BSS for use by the loader.
+  /* Now, read the data into allocated DSpace at doffset into the
+   * allocated DSpace memory.
    */
 
-  result = V_READ(load_info->bin_handle,
-		  load_info->file_handle,
-		  (char*)(load_info->dspace + NXFLAT_DATA_OFFSET),
-		  dspace_read_size,
-		  data_offset);
-
-  if (result >= (uint32) -4096)
+  ret = nxflat_read(loadinfo, (char*)(loadinfo->dspace + NXFLAT_DATA_OFFSET), dreadsize, doffset);
+  if (ret < 0)
     {
-      dbg("Unable to read DSpace, errno %d\n", -result);
-      (void)nxflat_unload(load_info);
-      return result;
+      bdbg("Failed to read .data section: %d\n", ret);
+      goto errout;
     }
-
+       
   /* Save information about the allocation. */
 
-  load_info->alloc_start = load_info->dspace;
-  load_info->alloc_size  = load_info->dspace_size;
+  loadinfo->alloc_start = loadinfo->dspace;
+  loadinfo->alloc_size  = loadinfo->dspace_size;
 
-  vdbg("TEXT=0x%x Entry point offset=0x%08x, datastart is 0x%08x\n",
-      load_info->ispace, load_info->entry_offset, data_offset);
+  bvdbg("TEXT=0x%x Entry point offset=0x%08x, datastart is 0x%08x\n",
+      loadinfo->ispace, loadinfo->entry_offset, doffset);
 
   /* Resolve the address of the relocation table.  In the file, the
    * relocations should lie at the same offset as BSS.  The current
@@ -445,69 +306,34 @@ int nxflat_load(struct nxflat_loadinfo_s *load_info)
    * The following adjustment will convert it to an address in DSpace.
    */
 
-  reloc_tab = (uint32*)
-    (load_info->reloc_start     /* File offset to reloc records */
-     + load_info->dspace        /* + Allocated DSpace memory */
+  reloctab = (uint32*)
+    (loadinfo->reloc_start     /* File offset to reloc records */
+     + loadinfo->dspace        /* + Allocated DSpace memory */
      + NXFLAT_DATA_OFFSET        /* + Offset for ldso usage */
-     - load_info->ispace_size); /* - File offset to DSpace */
+     - loadinfo->ispace_size); /* - File offset to DSpace */
 
-  vdbg("Relocation table at 0x%p, reloc_count=%d\n",
-      reloc_tab, load_info->reloc_count);
+  bvdbg("Relocation table at 0x%p, reloc_count=%d\n",
+      reloctab, loadinfo->reloc_count);
 
   /* Now run through the relocation entries. */
 
-  for (i=0; i < load_info->reloc_count; i++)
+  for (i=0; i < loadinfo->reloc_count; i++)
     {
-#ifdef __BIG_ENDIAN
-      nxflat_reloc(load_info, nxflat_swap32(reloc_tab[i]));
-#else
-      nxflat_reloc(load_info, reloc_tab[i]);
-#endif
+      nxflat_reloc(loadinfo, htonl(reloctab[i]));
     }
 
   /* Zero the BSS, BRK and stack areas, trashing the relocations
    * that lived in the corresponding space in the file. */
 
-  memset((void*)(load_info->dspace + NXFLAT_DATA_OFFSET + load_info->data_size),
+  memset((void*)(loadinfo->dspace + NXFLAT_DATA_OFFSET + loadinfo->data_size),
 	       0,
-	       (load_info->dspace_size - NXFLAT_DATA_OFFSET -
-		load_info->data_size));
+	       (loadinfo->dspace_size - NXFLAT_DATA_OFFSET -
+		loadinfo->data_size));
 
-  return 0;
-}
-
-/****************************************************************************
- * Name: nxflat_unload
- *
- * Description:
- *   This function unloads the object from memory. This essentially
- *   undoes the actions of nxflat_load.
- *
- ****************************************************************************/
-
-int nxflat_unload(struct nxflat_loadinfo_s *load_info)
-{
-  /* Reset the contents of the info structure. */
-
-  /* Nothing is allocated */
-
-  load_info->alloc_start = 0;
-  load_info->alloc_size  = 0;
-
-  /* Release the memory segments */
-
-  if (load_info->ispace)
-    {
-      V_UNMAP((void*)load_info->ispace, load_info->ispace_size);
-      load_info->ispace = 0;
-    }
-
-  if (load_info->dspace)
-    {
-      V_FREE((void*)load_info->dspace, load_info->dspace_size);
-      load_info->dspace = 0;
-    }
+  return OK;
 
-  return 0;
+errout:
+  (void)nxflat_unload(loadinfo);
+  return ret;
 }
 
diff --git a/nuttx/binfmt/libnxflat/libnxflat_read.c b/nuttx/binfmt/libnxflat/libnxflat_read.c
new file mode 100644
index 000000000..ff5200140
--- /dev/null
+++ b/nuttx/binfmt/libnxflat/libnxflat_read.c
@@ -0,0 +1,123 @@
+/****************************************************************************
+ * binfmt/libnxflat/libnxflat_read.c
+ *
+ *   Copyright (C) 2009 Gregory Nutt. All rights reserved.
+ *   Author: Gregory Nutt <spudmonkey@racsa.co.cr>
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions
+ * are met:
+ *
+ * 1. Redistributions of source code must retain the above copyright
+ *    notice, this list of conditions and the following disclaimer.
+ * 2. Redistributions in binary form must reproduce the above copyright
+ *    notice, this list of conditions and the following disclaimer in
+ *    the documentation and/or other materials provided with the
+ *    distribution.
+ * 3. Neither the name NuttX nor the names of its contributors may be
+ *    used to endorse or promote products derived from this software
+ *    without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
+ * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
+ * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
+ * FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE
+ * COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
+ * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING,
+ * BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS
+ * OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED
+ * AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
+ * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
+ * ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
+ * POSSIBILITY OF SUCH DAMAGE.
+ *
+ ****************************************************************************/
+
+/****************************************************************************
+ * Included Files
+ ****************************************************************************/
+
+#include <nuttx/config.h>
+#include <sys/types.h>
+
+#include <unistd.h>
+#include <string.h>
+#include <nxflat.h>
+#include <debug.h>
+#include <errno.h>
+
+#include <arpa/inet.h>
+#include <nuttx/nxflat.h>
+
+/****************************************************************************
+ * Pre-Processor Definitions
+ ****************************************************************************/
+
+/****************************************************************************
+ * Private Constant Data
+ ****************************************************************************/
+
+/****************************************************************************
+ * Private Functions
+ ****************************************************************************/
+
+/****************************************************************************
+ * Public Functions
+ ****************************************************************************/
+
+/****************************************************************************
+ * Name: nxflat_read
+ ****************************************************************************/
+
+int nxflat_read(struct nxflat_loadinfo_s *loadinfo, char *buffer, int readsize, int offset)
+{
+  ssize_t nbytes;      /* Number of bytes read */
+  off_t   rpos;        /* Position returned by lseek */
+  char   *bufptr;      /* Next buffer location to read into */
+  int     bytesleft;   /* Number of bytes of .data left to read */
+  int     bytesread;   /* Total number of bytes read */
+
+  /* Seek to the position in the object file where the initialized
+   * data is saved.
+   */
+
+  bytesread = 0;
+  bufptr    = buffer;
+  bytesleft = readsize;
+  do
+    {
+      rpos = lseek(loadinfo->filfd, offset, SEEK_SET);
+      if (rpos != offset)
+        {
+          bdbg("Failed to seek to position %d: %d\n", offset, errno);
+          return -errno;
+        }
+
+      /* Read the file data at offset into the user buffer */
+
+       nbytes = read(loadinfo->filfd, bufptr, bytesleft);
+       if (nbytes < 0)
+         {
+           if (errno != EINTR)
+             {
+               bdbg("Read of .data failed: %d\n", errno);
+               return -errno;
+             }
+         }
+       else if (nbytes == 0)
+         {
+           bdbg("Unexpected end of file\n");
+           return -ENODATA;
+         }
+       else
+         {
+           bytesread += nbytes;
+           bytesleft -= nbytes;
+           bufptr    += nbytes;
+           offset    += nbytes;
+         }
+    }
+  while (bytesread < readsize);
+  return OK;
+}
+
diff --git a/nuttx/binfmt/libnxflat/libnxflat_stack.c b/nuttx/binfmt/libnxflat/libnxflat_stack.c
deleted file mode 100644
index 082a2e05e..000000000
--- a/nuttx/binfmt/libnxflat/libnxflat_stack.c
+++ /dev/null
@@ -1,224 +0,0 @@
-/****************************************************************************
- * libnxflat/lib/nxflat_stack.c
- *
- *   Copyright (C) 2009 Gregory Nutt. All rights reserved.
- *   Author: Gregory Nutt <spudmonkey@racsa.co.cr>
- *
- * Redistribution and use in source and binary forms, with or without
- * modification, are permitted provided that the following conditions
- * are met:
- *
- * 1. Redistributions of source code must retain the above copyright
- *    notice, this list of conditions and the following disclaimer.
- * 2. Redistributions in binary form must reproduce the above copyright
- *    notice, this list of conditions and the following disclaimer in
- *    the documentation and/or other materials provided with the
- *    distribution.
- * 3. Neither the name NuttX nor the names of its contributors may be
- *    used to endorse or promote products derived from this software
- *    without specific prior written permission.
- *
- * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
- * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
- * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
- * FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE
- * COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
- * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING,
- * BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS
- * OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED
- * AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
- * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
- * ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
- * POSSIBILITY OF SUCH DAMAGE.
- *
- ****************************************************************************/
-
-/****************************************************************************
- * Included Files
- ****************************************************************************/
-
-#include <nuttx/config.h>
-#include <sys/types.h>
-#include <debug.h>
-#include <errno.h>
-#include <nuttx/nxflat.h>
-
-/****************************************************************************
- * Pre-processor Definitions
- ****************************************************************************/
-
-/****************************************************************************
- * Private Functions
- ****************************************************************************/
-
-/****************************************************************************
- * Public Functions
- ****************************************************************************/
-
-/****************************************************************************
- * Name: nxflat_adjuststacksize
- ****************************************************************************/
-
-void nxflat_adjuststacksize(struct nxflat_loadinfo_s *load_info,
-			     int argc, int envc, int system_usage)
-{
-  uint32 total_usage = system_usage;
-
-  /* For argc, we will store the array (argc elements), the argc
-   * value itself, plus a null pointer.
-   */
-
-  total_usage += (argc + 2) * sizeof(uint32);
-
-  /* For envc, we will store the array (envc elements) plus a null
-   * pointer.
-   */
-
-  total_usage += (envc + 1) * sizeof(uint32);
-
-  /* And we will store six additional words described the memory
-   * layout.
-   */
-
-  total_usage += 6 * sizeof(uint32);
-
-  /* Add this to the previously determined stack size */
-
-  load_info->stack_size += total_usage;
-}
-
-/****************************************************************************
- * Name: nxflat_initstack
- *
- * Description:
- *   When we enter the NXFLAT_ loader, it will expect to see a stack frame
- *   like the following.  NOTE: This logic assumes a push down stack
- *   (i.e., we decrement the stack pointer to go from the "BOTTOM" to
- *   the "TOP").
- *
- *
- *    TOP->argc                Argument count    (integer)
- *         argv[0...(argc-1)]  Program arguments (pointers)
- *         NULL                Marks end of arguments
- *         env[0...N]          Environment variables (pointers)
- *         NULL                Marks end of environment variables
- *         loader ispace       Address of loader ISpace (NXFLAT_ header)
- *         loader dspace       Address of loader DSpace
- *         loader dspace size  Size of the allocated loader DSpace
- *         program ispace      Address of program ISpace (NXFLAT_ header)
- *         program dspace      Address of program DSpace
- * BOTTOM->program dspace size Size of the allocated program DSpace
- *
- ****************************************************************************/
-
-uint32 nxflat_initstack(struct nxflat_loadinfo_s *prog_load_info,
-		       struct nxflat_loadinfo_s *lib_load_info,
-		       int argc, int envc, char *p)
-{
-  uint32 *argv;
-  uint32 *envp;
-  uint32 *sp;
-  char       dummy;
-
-  /* p points to the beginning of the array of arguments;
-   * sp points to the "bottom" of a push down stack.
-   */
-
-  sp = (uint32*)((-(uint32)sizeof(char*))&(uint32) p);
-
-  /* Place program information on the stack */
-
-  if (prog_load_info)
-    {
-      *sp-- = (uint32)prog_load_info->dspace_size;
-      *sp-- = (uint32)prog_load_info->dspace;
-      *sp-- = (uint32)prog_load_info->ispace;
-    }
-  else
-    {
-      dbg("No program load info provided\n");
-      return -EINVAL;
-    }
-
-  /* Place loader information on the stack */
-
-  if (lib_load_info)
-    {
-      *sp-- = (uint32)lib_load_info->dspace_size;
-      *sp-- = (uint32)lib_load_info->dspace;
-      *sp-- = (uint32)lib_load_info->ispace;
-    }
-  else
-    {
-      *sp-- = (uint32)0;
-      *sp-- = (uint32)0;
-      *sp-- = (uint32)0;
-    }
-
-  /* Allocate space on the stack for the envp array contents
-   * (including space for a null terminator).
-   */
-
-  sp  -= envc+1;
-  envp = sp;
-
-  /* Allocate space on the stack for the argv array contents
-   * (including space for a null terminator).
-   */
-
-  sp  -= argc+1;
-  argv = sp;
-
-  /* Put argc on the stack. sp now points to the "top" of the
-   * stack as it will be received by the new task.
-   */
-
-  *sp-- = (uint32)argc;
-
-  /* Copy argv pointers into the stack frame (terminated with
-   * a null pointer).
-   */
-
-  prog_load_info->arg_start = (uint32)p;
-  while (argc-->0)
-    {
-      /* Put the address of the beginning of the string */
-
-      *argv++ = (uint32)p;
-
-      /* Search for the end of the string */
-
-      do
-	{
-	  dummy = *p++;
-	}
-      while (dummy);
-    }
-  *argv = (uint32)NULL,argv;
-
-  /* Copy envp pointers into the stack frame (terminated with
-   * a null pointer).
-   */
-
-  prog_load_info->env_start = (uint32)p;
-  while (envc-->0)
-    {
-      /* Put the address of the beginning of the string */
-
-      *envp++ = (uint32)p;
-
-      /* Search for the end of the string */
-
-      do
-	{
-	  dummy = *p++;
-	}
-      while (dummy);
-    }
-  *envp = (uint32)NULL;
-
-  prog_load_info->env_end = (uint32)p;
-
-  return (uint32)sp;
-}
-
diff --git a/nuttx/binfmt/libnxflat/libnxflat_uninit.c b/nuttx/binfmt/libnxflat/libnxflat_uninit.c
new file mode 100644
index 000000000..47d1a90a2
--- /dev/null
+++ b/nuttx/binfmt/libnxflat/libnxflat_uninit.c
@@ -0,0 +1,79 @@
+/****************************************************************************
+ * binfmt/libnxflat/libnxflat_uninit.c
+ *
+ *   Copyright (C) 2009 Gregory Nutt. All rights reserved.
+ *   Author: Gregory Nutt <spudmonkey@racsa.co.cr>
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions
+ * are met:
+ *
+ * 1. Redistributions of source code must retain the above copyright
+ *    notice, this list of conditions and the following disclaimer.
+ * 2. Redistributions in binary form must reproduce the above copyright
+ *    notice, this list of conditions and the following disclaimer in
+ *    the documentation and/or other materials provided with the
+ *    distribution.
+ * 3. Neither the name NuttX nor the names of its contributors may be
+ *    used to endorse or promote products derived from this software
+ *    without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
+ * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
+ * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
+ * FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE
+ * COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
+ * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING,
+ * BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS
+ * OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED
+ * AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
+ * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
+ * ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
+ * POSSIBILITY OF SUCH DAMAGE.
+ *
+ ****************************************************************************/
+
+/****************************************************************************
+ * Included Files
+ ****************************************************************************/
+
+#include <nuttx/config.h>
+#include <sys/types.h>
+#include <unistd.h>
+#include <debug.h>
+#include <errno.h>
+#include <nuttx/nxflat.h>
+
+/****************************************************************************
+ * Pre-Processor Definitions
+ ****************************************************************************/
+
+/****************************************************************************
+ * Private Constant Data
+ ****************************************************************************/
+
+/****************************************************************************
+ * Private Functions
+ ****************************************************************************/
+
+/****************************************************************************
+ * Name: nxflat_swap32
+ ****************************************************************************/
+
+/****************************************************************************
+ * Public Functions
+ ****************************************************************************/
+
+/****************************************************************************
+ * Name: nxflat_uninit
+ ****************************************************************************/
+
+int nxflat_uninit(struct nxflat_loadinfo_s *loadinfo)
+{
+  if (loadinfo->filfd >= 0)
+    {
+      close(loadinfo->filfd);
+    }
+  return OK;
+}
+
diff --git a/nuttx/binfmt/libnxflat/libnxflat_unload.c b/nuttx/binfmt/libnxflat/libnxflat_unload.c
new file mode 100644
index 000000000..d648c0ebd
--- /dev/null
+++ b/nuttx/binfmt/libnxflat/libnxflat_unload.c
@@ -0,0 +1,99 @@
+/****************************************************************************
+ * binfmt/libnxflat/libnxflat_unload.c
+ *
+ *   Copyright (C) 2009 Gregory Nutt. All rights reserved.
+ *   Author: Gregory Nutt <spudmonkey@racsa.co.cr>
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions
+ * are met:
+ *
+ * 1. Redistributions of source code must retain the above copyright
+ *    notice, this list of conditions and the following disclaimer.
+ * 2. Redistributions in binary form must reproduce the above copyright
+ *    notice, this list of conditions and the following disclaimer in
+ *    the documentation and/or other materials provided with the
+ *    distribution.
+ * 3. Neither the name NuttX nor the names of its contributors may be
+ *    used to endorse or promote products derived from this software
+ *    without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
+ * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
+ * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
+ * FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE
+ * COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
+ * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING,
+ * BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS
+ * OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED
+ * AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
+ * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
+ * ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
+ * POSSIBILITY OF SUCH DAMAGE.
+ *
+ ****************************************************************************/
+
+/****************************************************************************
+ * Included Files
+ ****************************************************************************/
+
+#include <nuttx/config.h>
+#include <sys/types.h>
+#include <sys/mman.h>
+
+#include <stdlib.h>
+#include <debug.h>
+
+#include <nuttx/nxflat.h>
+
+/****************************************************************************
+ * Pre-Processor Definitions
+ ****************************************************************************/
+
+/****************************************************************************
+ * Private Constant Data
+ ****************************************************************************/
+
+/****************************************************************************
+ * Private Functions
+ ****************************************************************************/
+
+/****************************************************************************
+ * Public Functions
+ ****************************************************************************/
+
+/****************************************************************************
+ * Name: nxflat_unload
+ *
+ * Description:
+ *   This function unloads the object from memory. This essentially
+ *   undoes the actions of nxflat_load.
+ *
+ ****************************************************************************/
+
+int nxflat_unload(struct nxflat_loadinfo_s *loadinfo)
+{
+  /* Reset the contents of the info structure. */
+
+  /* Nothing is allocated */
+
+  loadinfo->alloc_start = 0;
+  loadinfo->alloc_size  = 0;
+
+  /* Release the memory segments */
+
+  if (loadinfo->ispace)
+    {
+      munmap((void*)loadinfo->ispace, loadinfo->ispace_size);
+      loadinfo->ispace = 0;
+    }
+
+  if (loadinfo->dspace)
+    {
+      free((void*)loadinfo->dspace);
+      loadinfo->dspace = 0;
+    }
+
+  return OK;
+}
+
diff --git a/nuttx/binfmt/libnxflat/libnxflat_verify.c b/nuttx/binfmt/libnxflat/libnxflat_verify.c
index b31994b8b..db1069e9f 100644
--- a/nuttx/binfmt/libnxflat/libnxflat_verify.c
+++ b/nuttx/binfmt/libnxflat/libnxflat_verify.c
@@ -1,5 +1,5 @@
 /****************************************************************************
- * nxflat/lib/nxflat_stack.c
+ * binfmt/libnxflat/nxflat_verify.c
  *
  *   Copyright (C) 2009 Gregory Nutt. All rights reserved.
  *   Author: Gregory Nutt <spudmonkey@racsa.co.cr>
@@ -49,20 +49,6 @@
  * Pre-processor Definitions
  ****************************************************************************/
 
-#define V_MAP   (load_info->vtbl->map)
-#define V_UNMAP (load_info->vtbl->unmap)
-#define V_ALLOC (load_info->vtbl->alloc)
-#define V_FREE  (load_info->vtbl->free)
-#define V_OPEN  (load_info->vtbl->open)
-#define V_READ  (load_info->vtbl->read)
-#define V_CLOSE (load_info->vtbl->close)
-
-#define XFLT_HDR_SIZE   sizeof(struct nxflat_hdr_s)
-
-#ifndef MAX
-#  define MAX(x,y) ((x) > (y) ? (x) : (y))
-#endif
-
 /****************************************************************************
  * Private Constant Data
  ****************************************************************************/
@@ -85,7 +71,7 @@ int nxflat_verifyheader(const struct nxflat_hdr_s *header)
 
   if (!header)
     {
-      dbg("NULL NXFLAT header!");
+      bdbg("NULL NXFLAT header!");
       return -ENOEXEC;
     }
 
@@ -97,7 +83,7 @@ int nxflat_verifyheader(const struct nxflat_hdr_s *header)
   
   if (strncmp(header->h_magic, "NXFLAT", 4) != 0)
     {
-      dbg("Unrecognized magic=\"%c%c%c%c\"",
+      bdbg("Unrecognized magic=\"%c%c%c%c\"",
 	  header->h_magic[0], header->h_magic[1],
 	  header->h_magic[2], header->h_magic[3]);
       return -ENOEXEC;
@@ -108,7 +94,7 @@ int nxflat_verifyheader(const struct nxflat_hdr_s *header)
   revision = ntohs(header->h_rev);
   if (revision != NXFLAT_VERSION_CURRENT)
     {
-      dbg("Unsupported NXFLAT version=%d\n", revision);
+      bdbg("Unsupported NXFLAT version=%d\n", revision);
       return -ENOEXEC;
     }
   return 0;
diff --git a/nuttx/binfmt/nxflat.c b/nuttx/binfmt/nxflat.c
new file mode 100644
index 000000000..d0456bebd
--- /dev/null
+++ b/nuttx/binfmt/nxflat.c
@@ -0,0 +1,236 @@
+/****************************************************************************
+ * binfmt/nxflat.c
+ *
+ *   Copyright (C) 2009 Gregory Nutt. All rights reserved.
+ *   Author: Gregory Nutt <spudmonkey@racsa.co.cr>
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions
+ * are met:
+ *
+ * 1. Redistributions of source code must retain the above copyright
+ *    notice, this list of conditions and the following disclaimer.
+ * 2. Redistributions in binary form must reproduce the above copyright
+ *    notice, this list of conditions and the following disclaimer in
+ *    the documentation and/or other materials provided with the
+ *    distribution.
+ * 3. Neither the name NuttX nor the names of its contributors may be
+ *    used to endorse or promote products derived from this software
+ *    without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
+ * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
+ * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
+ * FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE
+ * COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
+ * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING,
+ * BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS
+ * OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED
+ * AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
+ * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
+ * ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
+ * POSSIBILITY OF SUCH DAMAGE.
+ *
+ ****************************************************************************/
+
+/****************************************************************************
+ * Included Files
+ ****************************************************************************/
+
+#include <nuttx/config.h>
+#include <sys/types.h>
+
+#include <string.h>
+#include <nxflat.h>
+#include <debug.h>
+#include <errno.h>
+
+#include <arpa/inet.h>
+#include <nuttx/binfmt.h>
+#include <nuttx/nxflat.h>
+
+/****************************************************************************
+ * Pre-processor Definitions
+ ****************************************************************************/
+
+/****************************************************************************
+ * Private Function Prototypes
+ ****************************************************************************/
+
+static int nxflat_loadbinary(struct binary_s *binp);
+#if defined(CONFIG_DEBUG) && defined(CONFIG_DEBUG_BINFMT)
+static void nxflat_dumpmemory(void *addr, int nbytes);
+static void nxflat_dumploadinfo(struct nxflat_loadinfo_s *loadinfo);
+#endif
+
+/****************************************************************************
+ * Private Constant Data
+ ****************************************************************************/
+
+static struct binfmt_s g_nxflatbinfmt =
+{
+  NULL,                /* next */
+  nxflat_loadbinary,   /* load */
+};
+
+/****************************************************************************
+ * Private Functions
+ ****************************************************************************/
+
+/****************************************************************************
+ * Name: nnxflat_dumpmemory
+ ****************************************************************************/
+
+#if defined(CONFIG_DEBUG) && defined(CONFIG_DEBUG_BINFMT)
+static void nxflat_dumpmemory(void *addr, int nbytes)
+{
+  ubyte *ptr;
+
+  bdbg("  ADDRESS    VALUE\n");
+  for (ptr = (ubyte*)addr; nbytes > 0; ptr += 4, nbytes -= 4)
+    {
+      bdbg("  %p: %02x %02x %02x %02x\n", ptr, ptr[0], ptr[1], ptr[2], ptr[3]);
+    }
+}
+#else /* CONFIG_XFLAT_DEBUG */
+# define nnxflat_dumpmemory(a,n)
+#endif /* CONFIG_XFLAT_DEBUG */
+
+/****************************************************************************
+ * Name: nxflat_dumploadinfo
+ ****************************************************************************/
+
+#if defined(CONFIG_DEBUG) && defined(CONFIG_DEBUG_BINFMT)
+static void nxflat_dumploadinfo(struct nxflat_loadinfo_s *loadinfo)
+{
+  unsigned long dspace_size =
+    NXFLAT_DATA_OFFSET +
+    loadinfo->data_size +
+    loadinfo->bss_size +
+    loadinfo->stack_size;
+
+  bdbg("LOAD_INFO:\n");
+  bdbg("  ISPACE:\n");
+  bdbg("    ispace:       %08lx\n", loadinfo->ispace);
+  bdbg("    entry_offset: %08lx\n", loadinfo->entry_offset);
+  bdbg("    ispace_size:  %08lx\n", loadinfo->ispace_size);
+
+  bdbg("  DSPACE:\n");
+  bdbg("    dspace:       %08lx\n", loadinfo->dspace);
+  bdbg("      (ldso):     %08x\n",  NXFLAT_DATA_OFFSET);
+  bdbg("    data_size:    %08lx\n", loadinfo->data_size);
+  bdbg("    bss_size:     %08lx\n", loadinfo->bss_size);
+  bdbg("      (pad):      %08lx\n", loadinfo->dspace_size - dspace_size);
+  bdbg("    stack_size:   %08lx\n", loadinfo->stack_size);
+  bdbg("    dspace_size:  %08lx\n", loadinfo->dspace_size);
+
+  bdbg("  ARGUMENTS:\n");
+  bdbg("    arg_start:    %08lx\n", loadinfo->arg_start);
+  bdbg("    env_start:    %08lx\n", loadinfo->env_start);
+  bdbg("    env_end:      %08lx\n", loadinfo->env_end);
+
+  bdbg("  RELOCS:\n");
+  bdbg("    reloc_start:  %08lx\n", loadinfo->reloc_start);
+  bdbg("    reloc_count:  %08lx\n", loadinfo->reloc_count);
+
+  bdbg("  HANDLES:\n");
+  bdbg("    filfd:        %d\n",    loadinfo->filfd);
+
+  bdbg("  NXFLT HEADER:");
+  bdbg("    header:       %p\n",    loadinfo->header);
+
+  bdbg("  ALLOCATIONS:\n");
+  bdbg("    alloc_start:  %08lx\n", loadinfo->alloc_start);
+  bdbg("    alloc_size:   %08lx\n", loadinfo->alloc_size);
+}
+#else /* CONFIG_XFLAT_DEBUG */
+# define nxflat_dumploadinfo(i)
+#endif /* CONFIG_XFLAT_DEBUG */
+
+/****************************************************************************
+ * Name: nxflat_loadbinary
+ *
+ * Description:
+ *   Verify that the file is an NXFLAT binary and, if so, load the NXFLAT
+ *   binary into memory
+ *
+ ****************************************************************************/
+
+static int nxflat_loadbinary(struct binary_s *binp)
+{
+  struct nxflat_hdr_s      header;    /* Just allocated memory */
+  struct nxflat_loadinfo_s loadinfo;  /* Contains globals for libnxflat */
+  int                      ret;
+
+  bvdbg("Loading file: %s\n", binp->filename);
+
+  /* Initialize the xflat library to load the program binary. */
+
+  ret = nxflat_init(binp->filename, &header, &loadinfo);
+  nxflat_dumploadinfo(&loadinfo);
+  if (ret != 0)
+    {
+      bdbg("Failed to initialize for load of NXFLT program: %d\n", ret);
+      return ret;
+    }
+
+  /* Load the program binary */
+
+  ret = nxflat_load(&loadinfo);
+  nxflat_dumploadinfo(&loadinfo);
+  if (ret != 0)
+    {
+      bdbg("Failed to load NXFLT program binary: %d\n", ret);
+      nxflat_uninit(&loadinfo);
+      return ret;
+    }
+
+  /* Return the load information */
+
+  binp->entrypt = (main_t)(loadinfo.ispace + loadinfo.entry_offset);
+  binp->picbase = (void*)loadinfo.dspace;
+
+  bvdbg("ENTRY CODE:\n");
+  nxflat_dumpmemory(binp->entrypt, 16*sizeof(unsigned long));
+  nxflat_uninit(&loadinfo);
+  return OK;
+}
+
+/***********************************************************************
+ * Public Functions
+ ***********************************************************************/
+
+/***********************************************************************
+ * Name: nxflat_initialize
+ *
+ * Description:
+ *   NXFLAT support is built unconditionally.  However, it order to
+ *   use this binary format, this function must be called during system
+ *   format in order to register the NXFLAT binary format.
+ *
+ ***********************************************************************/
+
+int nxflat_initialize(void)
+{
+  int ret;
+
+  /* Register ourselves as a binfmt loader */
+
+  bvdbg("Registering NXFLAT\n");
+  ret = register_binfmt(&g_nxflatbinfmt);
+  if (ret != 0)
+    {
+      bdbg("Failed to register binfmt: %d\n", ret);
+    }
+  return ret;
+}
+
+/****************************************************************************
+ * Name: nxflat_uninitialize
+ ****************************************************************************/
+
+void nxflat_uninitialize(void)
+{
+  unregister_binfmt(&g_nxflatbinfmt);
+}
+
diff --git a/nuttx/include/debug.h b/nuttx/include/debug.h
index 8bd43a310..7253d93e4 100644
--- a/nuttx/include/debug.h
+++ b/nuttx/include/debug.h
@@ -1,5 +1,5 @@
 /****************************************************************************
- * debug.h
+ * include/debug.h
  *
  *   Copyright (C) 2007-2009 Gregory Nutt. All rights reserved.
  *   Author: Gregory Nutt <spudmonkey@racsa.co.cr>
@@ -33,8 +33,8 @@
  *
  ****************************************************************************/
 
-#ifndef __DEBUG_H
-#define __DEBUG_H
+#ifndef __INCLUDE_DEBUG_H
+#define __INCLUDE_DEBUG_H
 
 /****************************************************************************
  * Included Files
@@ -175,6 +175,18 @@
 # define gllvdbg(x...)
 #endif
 
+#ifdef CONFIG_DEBUG_BINFMT
+# define bdbg(format, arg...)    dbg(format, ##arg)
+# define blldbg(format, arg...)  lldbg(format, ##arg)
+# define bvdbg(format, arg...)   vdbg(format, ##arg)
+# define bllvdbg(format, arg...) llvdbg(format, ##arg)
+#else
+# define bdbg(x...)
+# define blldbg(x...)
+# define bvdbg(x...)
+# define bllvdbg(x...)
+#endif
+
 #ifdef CONFIG_DEBUG_LIB
 # define ldbg(format, arg...)    dbg(format, ##arg)
 # define llldbg(format, arg...)  lldbg(format, ##arg)
@@ -284,6 +296,18 @@
 # define gllvdbg (void)
 #endif
 
+#ifdef CONFIG_DEBUG_BINFMT
+# define bdbg    dbg
+# define blldbg  lldbg
+# define bvdbg   vdbg
+# define bllvdbg llvdbg
+#else
+# define bdbg    (void)
+# define blldbg  (void)
+# define bvdbg   (void)
+# define bllvdbg (void)
+#endif
+
 #ifdef CONFIG_DEBUG_LIB
 # define ldbg    dbg
 # define llldbg  lldbg
@@ -357,4 +381,4 @@ EXTERN int llvdbg(const char *format, ...);
 }
 #endif
 
-#endif /* __DEBUG_H */
+#endif /* __INCLUDE_DEBUG_H */
diff --git a/nuttx/include/errno.h b/nuttx/include/errno.h
index 1dea0f409..945f83957 100644
--- a/nuttx/include/errno.h
+++ b/nuttx/include/errno.h
@@ -1,7 +1,7 @@
 /************************************************************************
  * include/errno.h
  *
- *   Copyright (C) 2007, 2008 Gregory Nutt. All rights reserved.
+ *   Copyright (C) 2007-2009 Gregory Nutt. All rights reserved.
  *   Author: Gregory Nutt <spudmonkey@racsa.co.cr>
  *
  * Redistribution and use in source and binary forms, with or without
@@ -33,8 +33,8 @@
  *
  ************************************************************************/
 
-#ifndef __ERRNO_H
-#define __ERRNO_H
+#ifndef __INCLUDE_ERRNO_H
+#define __INCLUDE_ERRNO_H
 
 /************************************************************************
  * Included Files
@@ -324,4 +324,4 @@ extern FAR int *get_errno_ptr(void);
 }
 #endif
 
-#endif /* __ERRNO_H */
+#endif /* __INCLUDE_ERRNO_H */
diff --git a/nuttx/include/nuttx/binfmt.h b/nuttx/include/nuttx/binfmt.h
new file mode 100644
index 000000000..20b27987a
--- /dev/null
+++ b/nuttx/include/nuttx/binfmt.h
@@ -0,0 +1,100 @@
+/****************************************************************************
+ * include/nuttx/binfmt.h
+ *
+ *   Copyright (C) 2009 Gregory Nutt. All rights reserved.
+ *   Author: Gregory Nutt <spudmonkey@racsa.co.cr>
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions
+ * are met:
+ *
+ * 1. Redistributions of source code must retain the above copyright
+ *    notice, this list of conditions and the following disclaimer.
+ * 2. Redistributions in binary form must reproduce the above copyright
+ *    notice, this list of conditions and the following disclaimer in
+ *    the documentation and/or other materials provided with the
+ *    distribution.
+ * 3. Neither the name NuttX nor the names of its contributors may be
+ *    used to endorse or promote products derived from this software
+ *    without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
+ * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
+ * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
+ * FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE
+ * COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
+ * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING,
+ * BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS
+ * OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED
+ * AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
+ * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
+ * ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
+ * POSSIBILITY OF SUCH DAMAGE.
+ *
+ ****************************************************************************/
+
+#ifndef __INCLUDE_NUTTX_BINFMT_H
+#define __INCLUDE_NUTTX_BINFMT_H
+
+/****************************************************************************
+ * Included Files
+ ****************************************************************************/
+
+#include <nuttx/config.h>
+#include <sys/types.h>
+#include <nxflat.h>
+
+/****************************************************************************
+ * Pre-processor Definitions
+ ****************************************************************************/
+
+/****************************************************************************
+ * Public Types
+ ****************************************************************************/
+
+/* This describes the file to be loaded */
+
+struct binary_s
+{
+  /* Provided to the loader */
+
+  const char  *filename;             /* Full path to the binary */
+  const char **argv;                 /* Argument list */
+
+  /* Provided by the loader (if successful) */
+
+  main_t       entrypt;              /* Entry point into a program module */
+  void        *picbase;              /* Address of the allocate .data/.bss space */
+};
+
+/* This describes one binary format handler */
+
+struct binfmt_s
+{
+  struct binfmt_s *next;             /* Supports a singly-linked list */
+  int (*load)(struct binary_s *bin); /* Verify and load binary into memory */
+};
+
+/****************************************************************************
+ * Public Functions
+ ****************************************************************************/
+
+#undef EXTERN
+#if defined(__cplusplus)
+#define EXTERN extern "C"
+extern "C" {
+#else
+#define EXTERN extern
+#endif
+
+/* Register/unregister a binary format */
+
+EXTERN int register_binfmt(struct binfmt_s *binfmt);
+EXTERN int unregister_binfmt(struct binfmt_s *binfmt);
+
+#undef EXTERN
+#if defined(__cplusplus)
+}
+#endif
+
+#endif /* __INCLUDE_NUTTX_BINFMT_H */
diff --git a/nuttx/include/nuttx/nxflat.h b/nuttx/include/nuttx/nxflat.h
index e3d19e1de..20fabdf7c 100644
--- a/nuttx/include/nuttx/nxflat.h
+++ b/nuttx/include/nuttx/nxflat.h
@@ -62,45 +62,6 @@ struct nxflat_ldso_info
 };
 #define NXFLAT_DATA_OFFSET sizeof(struct nxflat_ldso_info)
 
-/* An "opaque" handle that describes the xflat binary to be loaded. */
-
-typedef void *bin_handle_t;
-
-/* An "opaque" handle that describes an open file */
-
-typedef void *file_handle_t;
-
-/* This is a call table that is used by the xflat library to call
- * obtain system information.  The use of this call table allows the
- * library to be designed in a platform independent way.
- */
-
-struct nxflat_vtbl_s
-{
-  /* Allocators.  These imports keep the xflat library independent of
-   * the memory mapping and memory management facilities of the host
-   * system.
-   *
-   *   map/unmap will map/unmap a program file onto an address;
-   *   alloc/free will allocate/deallocate program memory.
-   */
-
-  void *(*map)(file_handle_t file_handle, uint32 nbytes);
-  void  (*unmap)(void *address, uint32 nbytes);
-  void *(*alloc)(uint32 nbytes);
-  void  (*free)(void *address, uint32 nbytes);
-
-  /* File access utilities.  These imports keep the xflat libary independent
-   * of the host system's file system.
-   */
-
-  file_handle_t (*open)(bin_handle_t bin_handle, const char *filename);
-  int   (*read)(bin_handle_t bin_handle, file_handle_t file_handle,
-		char *dest, uint32 nbytes,
-		uint32 fpos);
-  void  (*close)(file_handle_t file_handle);
-};
-
 /* This struct provides a desciption of the currently loaded
  * instantiation of an xflat binary.
  */
@@ -113,8 +74,8 @@ struct nxflat_loadinfo_s
    */
 
   uint32 ispace;       /* Address where hdr/text is loaded */
-                          /* 1st: struct nxflat_hdr_s */
-                          /* 2nd: text section */
+                       /* 1st: struct nxflat_hdr_s */
+                       /* 2nd: text section */
   uint32 entry_offset; /* Offset from ispace to entry point */
   uint32 ispace_size;  /* Size of ispace. */
 
@@ -142,25 +103,18 @@ struct nxflat_loadinfo_s
   uint32 reloc_start;  /* Start of array of struct flat_reloc */
   uint32 reloc_count;  /* Number of elements in reloc array */
 
-  /* These are hooks stored by nxflat_init for subsequent use.
-   * These constitute all points of contact between the flat
-   * library and the rest of the world.  These allows the flat
-   * library to opperate in a variey of contexts without change.
-   */
+  /* File descriptors */
 
-  bin_handle_t  bin_handle;   /* Like a "this" pointer.  Retains
-			       * calling context information in callbacks */
-  file_handle_t file_handle;  /* Describes an open file */
+  int    filfd;        /* Descriptor for the file being loaded */
 
   const struct nxflat_hdr_s  *header; /* A reference to the flat file header */
-  const struct nxflat_vtbl_s *vtbl;   /* Systam callback vtbl */
 
   /* At most one memory allocation will be made.  These describe that
    * allocation.
    */
 
-  uint32 alloc_start; /* Start of the allocation */
-  uint32 alloc_size;  /* Size of the allocation */
+  uint32 alloc_start;  /* Start of the allocation */
+  uint32 alloc_size;   /* Size of the allocation */
 };
 
 /****************************************************************************
@@ -175,54 +129,42 @@ extern "C" {
 #define EXTERN extern
 #endif
 
-/* Given the header from a possible xFLT executable, verify that it
+/* Given the header from a possible NXFLAT executable, verify that it
  * is an NXFLAT executable.
  */
 
 EXTERN int nxflat_verifyheader(const struct nxflat_hdr_s *header);
 
-/* This function is called to configure xflatlib to process an xFLT
- * program binary.  Upon return, the controlling logic has the opportunity
- * to adjust the contents of the load_info structure.
- */
-
-EXTERN int nxflat_init(bin_handle_t bin_handle, file_handle_t file_handle,
-	                const struct nxflat_hdr_s *header,
-	                const struct nxflat_vtbl_s *vtbl,
-	                struct nxflat_loadinfo_s *load_info);
-
-/* This function unloads the object from memory. This essentially
- * undoes the actions of nxflat_load.
+/* This function is called to configure the library to process an NXFLAT
+ * program binary.
  */
 
-EXTERN int nxflat_unload(struct nxflat_loadinfo_s *load_info);
+EXTERN int nxflat_init(const char *filename,
+                       struct nxflat_hdr_s *header,
+	               struct nxflat_loadinfo_s *loadinfo);
 
 /* Releases any resources committed by nxflat_init().  This essentially
- * undoes the actions of nxflat_init or nxflat_init_interpreter. */
+ * undoes the actions of nxflat_init.
+ */
 
-EXTERN int nxflat_uninit(struct nxflat_loadinfo_s *load_info);
+EXTERN int nxflat_uninit(struct nxflat_loadinfo_s *loadinfo);
 
 /* Loads the binary specified by nxflat_init into memory,
  * Completes all relocations, and clears BSS.
  */
 
-EXTERN int nxflat_load(struct nxflat_loadinfo_s *load_info);
-
-/* Adjust stack size to include argc, envc, xFLT internal usage and
- * system internal usage. */
-
-EXTERN void nxflat_adjuststacksize(struct nxflat_loadinfo_s *load_info,
-			            int argc, int envc, int system_usage);
+EXTERN int nxflat_load(struct nxflat_loadinfo_s *loadinfo);
 
-/* Initialize stack frame for execution */
+/* Read 'readsize' bytes from the object file at 'offset' */
 
-EXTERN uint32 nxflat_initstack(struct nxflat_loadinfo_s *prog_load_info,
-		                struct nxflat_loadinfo_s *lib_load_info,
-		                int argc, int envc, char *p);
+EXTERN int nxflat_read(struct nxflat_loadinfo_s *loadinfo, char *buffer,
+                       int readsize, int offset);
 
-/* Releases any resources committed by nxflat_init(). */
+/* This function unloads the object from memory. This essentially
+ * undoes the actions of nxflat_load.
+ */
 
-EXTERN int nxflat_uninit(struct nxflat_loadinfo_s *load_info);
+EXTERN int nxflat_unload(struct nxflat_loadinfo_s *loadinfo);
 
 #undef EXTERN
 #if defined(__cplusplus)
diff --git a/nuttx/include/sys/types.h b/nuttx/include/sys/types.h
index 993c44e8d..0c0204255 100644
--- a/nuttx/include/sys/types.h
+++ b/nuttx/include/sys/types.h
@@ -135,7 +135,7 @@ typedef int          STATUS;
 typedef unsigned int socklen_t;
 typedef uint16       sa_family_t;
 
-/* Process entry point */
+/* Task entry point */
 
 typedef int (*main_t)(int argc, char *argv[]);