diff options
author | patacongo <patacongo@42af7a65-404d-4744-a932-0658087f49c3> | 2011-06-11 16:45:31 +0000 |
---|---|---|
committer | patacongo <patacongo@42af7a65-404d-4744-a932-0658087f49c3> | 2011-06-11 16:45:31 +0000 |
commit | 63866f8da09e268ecb79c346e51355a74f1fd3df (patch) | |
tree | 299cc48c9bcfcd1a74dc0117ebe7f5b33b2e2c08 | |
parent | c0cf3ce4b3306a6ea08d579f84247900b7e9611e (diff) | |
download | nuttx-63866f8da09e268ecb79c346e51355a74f1fd3df.tar.gz nuttx-63866f8da09e268ecb79c346e51355a74f1fd3df.tar.bz2 nuttx-63866f8da09e268ecb79c346e51355a74f1fd3df.zip |
Finsh AVR serial drivers
git-svn-id: svn://svn.code.sf.net/p/nuttx/code/trunk@3696 42af7a65-404d-4744-a932-0658087f49c3
-rw-r--r-- | nuttx/arch/avr/include/avr/types.h | 4 | ||||
-rw-r--r-- | nuttx/arch/avr/src/at90usb/at90usb_config.h | 10 | ||||
-rw-r--r-- | nuttx/arch/avr/src/at90usb/at90usb_internal.h | 43 | ||||
-rw-r--r-- | nuttx/arch/avr/src/at90usb/at90usb_serial.c | 168 | ||||
-rw-r--r-- | nuttx/arch/avr/src/atmega/atmega_config.h | 10 | ||||
-rw-r--r-- | nuttx/arch/avr/src/atmega/atmega_internal.h | 33 | ||||
-rw-r--r-- | nuttx/arch/avr/src/atmega/atmega_lowconsole.c | 4 | ||||
-rw-r--r-- | nuttx/arch/avr/src/atmega/atmega_serial.c | 319 | ||||
-rw-r--r-- | nuttx/arch/avr/src/avr/avr_internal.h | 2 |
9 files changed, 336 insertions, 257 deletions
diff --git a/nuttx/arch/avr/include/avr/types.h b/nuttx/arch/avr/include/avr/types.h index 0ff769576..2dd35a5cb 100644 --- a/nuttx/arch/avr/include/avr/types.h +++ b/nuttx/arch/avr/include/avr/types.h @@ -69,7 +69,7 @@ typedef unsigned char _uint8_t; typedef signed int _int16_t; /* int is 16-bits */ typedef unsigned int _uint16_t; -typedef signed long _int32_t; /* long is 32-bits */ +typedef signed long _int32_t; /* long is 32-bits */ typedef unsigned long _uint32_t; typedef signed long long _int64_t; /* long long is 64-bits */ @@ -83,7 +83,7 @@ typedef unsigned int _uintptr_t; /* This is the size of the interrupt state save returned by irqsave(). */ -typedef unsigned char irqstate_t; +typedef unsigned char irqstate_t; #endif /* __ASSEMBLY__ */ diff --git a/nuttx/arch/avr/src/at90usb/at90usb_config.h b/nuttx/arch/avr/src/at90usb/at90usb_config.h index be3cd54f1..7505c162d 100644 --- a/nuttx/arch/avr/src/at90usb/at90usb_config.h +++ b/nuttx/arch/avr/src/at90usb/at90usb_config.h @@ -63,6 +63,16 @@ # undef HAVE_SERIAL_CONSOLE #endif +/* Determine which (if any) console driver to use */ + +#if CONFIG_NFILE_DESCRIPTORS == 0 || defined(CONFIG_DEV_LOWCONSOLE) || !defined(HAVE_USART_DEVICE) +# undef CONFIG_USE_SERIALDRIVER +# undef CONFIG_USE_EARLYSERIALINIT +#elif defined(CONFIG_DEV_CONSOLE) && CONFIG_NFILE_DESCRIPTORS > 0 +# define CONFIG_USE_SERIALDRIVER 1 +# define CONFIG_USE_EARLYSERIALINIT 1 +#endif + /************************************************************************************ * Public Types ************************************************************************************/ diff --git a/nuttx/arch/avr/src/at90usb/at90usb_internal.h b/nuttx/arch/avr/src/at90usb/at90usb_internal.h index 856778c84..609631dd5 100644 --- a/nuttx/arch/avr/src/at90usb/at90usb_internal.h +++ b/nuttx/arch/avr/src/at90usb/at90usb_internal.h @@ -54,9 +54,6 @@ * Pre-processor Definitions ****************************************************************************/ -/* Bit-encoded input to at90usb_configgpio() ********************************/ -# warning "Missing definitions" - /**************************************************************************** * Public Types ****************************************************************************/ @@ -94,57 +91,47 @@ extern "C" { EXTERN void up_clkinitialize(void); /**************************************************************************** - * Name: up_consoleinit - * - * Description: - * Initialize a console for debug output. This function is called very - * early in the intialization sequence to configure the serial console - * uart (only). - * - ****************************************************************************/ - -EXTERN void up_consoleinit(void); - -/**************************************************************************** - * Name: up_boardinit + * Name: usart1_reset * * Description: - * This function must be provided by the board-specific logic in the - * directory configs/<board-name>/up_boot.c. + * Reset USART1. * ****************************************************************************/ -EXTERN void up_boardinitialize(void); +EXTERN void usart1_reset(void); /**************************************************************************** - * Name: at90usb_configgpio + * Name: usart1_configure * * Description: - * Configure a GPIO pin based on bit-encoded description of the pin. + * Configure USART1. * ****************************************************************************/ -EXTERN int at90usb_configgpio(uint16_t cfgset); +EXTERN void usart1_configure(void); /**************************************************************************** - * Name: at90usb_gpiowrite + * Name: up_consoleinit * * Description: - * Write one or zero to the selected GPIO pin + * Initialize a console for debug output. This function is called very + * early in the intialization sequence to configure the serial console + * uart (only). * ****************************************************************************/ -EXTERN void at90usb_gpiowrite(uint16_t pinset, bool value); +EXTERN void up_consoleinit(void); /**************************************************************************** - * Name: at90usb_gpioread + * Name: up_boardinit * * Description: - * Read one or zero from the selected GPIO pin + * This function must be provided by the board-specific logic in the + * directory configs/<board-name>/up_boot.c. * ****************************************************************************/ -EXTERN bool at90usb_gpioread(uint16_t pinset); +EXTERN void up_boardinitialize(void); /**************************************************************************** * Name: gpio_irqinitialize diff --git a/nuttx/arch/avr/src/at90usb/at90usb_serial.c b/nuttx/arch/avr/src/at90usb/at90usb_serial.c index 20974fdc5..35c6d691a 100644 --- a/nuttx/arch/avr/src/at90usb/at90usb_serial.c +++ b/nuttx/arch/avr/src/at90usb/at90usb_serial.c @@ -79,11 +79,6 @@ #ifdef CONFIG_USE_SERIALDRIVER -#if defined(CONFIG_USART1_SERIAL_CONSOLE) -# define CONSOLE_DEV g_usart1port /* USART1 is console */ -#endif -#define TTYS0_DEV g_usart1port /* USART1 is ttyS0 */ - /**************************************************************************** * Private Types ****************************************************************************/ @@ -96,9 +91,10 @@ static int usart1_setup(struct uart_dev_s *dev); static void usart1_shutdown(struct uart_dev_s *dev); static int usart1_attach(struct uart_dev_s *dev); static void usart1_detach(struct uart_dev_s *dev); -static int usart1_interrupt(int irq, void *context); +static int usart1_rxinterrupt(int irq, void *context); +static int usart1_txinterrupt(int irq, void *context); static int usart1_ioctl(struct file *filep, int cmd, unsigned long arg); -static int usart1_receive(struct uart_dev_s *dev, uint32_t *status); +static int usart1_receive(struct uart_dev_s *dev, FAR unsigned int *status); static void usart1_rxint(struct uart_dev_s *dev, bool enable); static bool usart1_rxavailable(struct uart_dev_s *dev); static void usart1_send(struct uart_dev_s *dev, int ch); @@ -132,7 +128,6 @@ static char g_usart1txbuffer[CONFIG_USART1_TXBUFSIZE]; /* This describes the state of the AT90USB USART1 port. */ -#ifdef CONFIG_AVR_USART1_RS232 static uart_dev_t g_usart1port = { .recv = @@ -147,7 +142,6 @@ static uart_dev_t g_usart1port = }, .ops = &g_uart1_ops, }; -#endif /**************************************************************************** * Private Functions @@ -159,7 +153,13 @@ static uart_dev_t g_usart1port = static void usart1_restoreusartint(uint8_t imr) { -# warning "Missing logic" + uint8_t regval; + + regval = UCSR1B; + regval &= ~((1 << RXCIE1) | (1 << TXCIE1) | (1 << UDRIE1)); + imr &= ((1 << RXCIE1) | (1 << TXCIE1) | (1 << UDRIE1)); + regval |= imr; + UCSR1B = regval; } /**************************************************************************** @@ -168,7 +168,9 @@ static void usart1_restoreusartint(uint8_t imr) static inline void usart1_disableusartint(uint8_t *imr) { -# warning "Missing logic" + uint8_t regval = UCSR1B; + *imr = regval; + regval &= ~((1 << RXCIE1) | (1 << TXCIE1) | (1 << UDRIE1)); } /**************************************************************************** @@ -225,11 +227,22 @@ static void usart1_shutdown(struct uart_dev_s *dev) static int usart1_attach(struct uart_dev_s *dev) { - /* Attach the USART1 IRQs */ + /* Attach the USART1 IRQs: + * + * RX: USART Receive Complete. Set when are unread data in the receive + * buffer and cleared when the receive buffer is empty. + * TX: USART Transmit Complete. Set when the entire frame in the Transmit + * Shift Register has been shifted out and there are no new data + * currently present in the transmit buffer. + * DRE: USART Data Register Empty. Indicates if the transmit buffer is ready + * to receive new data: The buffer is empty, and therefore ready to be + * written. + */ - return irq_attach(AT90USB_IRQ_U1RX, usart1_interrupt); - return irq_attach(AT90USB_IRQ_U1DRE, usart1_interrupt); - return irq_attach(AT90USB_IRQ_U1TX, usart1_interrupt); + (void)irq_attach(AT90USB_IRQ_U1RX, usart1_rxinterrupt); + (void)irq_attach(AT90USB_IRQ_U1DRE, usart1_txinterrupt); +// (void)irq_attach(AT90USB_IRQ_U1TX, usart1_txinterrupt); + return OK; } /**************************************************************************** @@ -246,64 +259,65 @@ static void usart1_detach(struct uart_dev_s *dev) { /* Disable USART1 interrupts */ -# warning "Missing logic" + usart1_disableusartint(NULL); /* Detach USART1 interrupts */ - return irq_deattach(AT90USB_IRQ_U1RX); - return irq_deattach(AT90USB_IRQ_U1DRE); - return irq_deattach(AT90USB_IRQ_U1TX); + (void)irq_detach(AT90USB_IRQ_U1RX); + (void)irq_detach(AT90USB_IRQ_U1DRE); +// (void)irq_detach(AT90USB_IRQ_U1TX); } /**************************************************************************** - * Name: usart1_interrupt + * Name: usart1_rxinterrupt * * Description: - * This is the USART interrupt handler. It will be invoked when an - * interrupt received on the 'irq' It should call uart_transmitchars or - * uart_receivechar to perform the appropriate data transfers. The - * interrupt handling logic must be able to map the 'irq' number into the - * approprite uart_dev_s structure in order to call these functions. + * This is the USART RX interrupt handler. It will be invoked when an + * RX interrupt received. It will call uart_receivechar to perform the RX + * data transfers. * ****************************************************************************/ -static int usart1_interrupt(int irq, void *context) +static int usart1_rxinterrupt(int irq, void *context) { - uint8_t csr; - int passes; - bool handled; + uint8_t ucsr1a = UCSR1A; - /* Loop until there are no characters to be transferred or, - * until we have been looping for a long time. - */ + /* Handle incoming, receive bytes (with or without timeout) */ - handled = true; - for (passes = 0; passes < 256 && handled; passes++) + if ((ucsr1a & (1 << RXC1)) != 0) { - handled = false; + /* Received data ready... process incoming bytes */ -# warning "Missing logic" - /* Handle incoming, receive bytes (with or without timeout) */ + uart_recvchars(&g_usart1port); + } -# warning "Missing logic" - { - /* Received data ready... process incoming bytes */ + return OK; +} - uart_recvchars(dev); - handled = true; - } +/**************************************************************************** + * Name: usart1_txinterrupt + * + * Description: + * This is the USART TX interrupt handler. It will be invoked when an + * TX or DRE interrupt received. It will call uart_xmitchars to perform + * the TXdata transfers. + * + ****************************************************************************/ + +static int usart1_txinterrupt(int irq, void *context) +{ + uint8_t ucsr1a = UCSR1A; - /* Handle outgoing, transmit bytes */ + /* Handle outgoing, transmit bytes */ -# warning "Missing logic" - { - /* Transmit data regiser empty ... process outgoing bytes */ + if ((ucsr1a & (1 << TXC1)) != 0) + { + /* Transmit data regiser empty ... process outgoing bytes */ - uart_xmitchars(dev); - handled = true; - } + uart_xmitchars(&g_usart1port); } - return OK; + + return OK; } /**************************************************************************** @@ -345,13 +359,13 @@ static int usart1_ioctl(struct file *filep, int cmd, unsigned long arg) * ****************************************************************************/ -static int usart1_receive(struct uart_dev_s *dev, uint32_t *status) +static int usart1_receive(struct uart_dev_s *dev, FAR unsigned int *status) { /* Return status information */ if (status) { - *status = (uint32_t)UCSR1A; + *status = (FAR unsigned int)UCSR1A; } /* Then return the actual received byte */ @@ -369,19 +383,21 @@ static int usart1_receive(struct uart_dev_s *dev, uint32_t *status) static void usart1_rxint(struct uart_dev_s *dev, bool enable) { + /* Enable/disable RX interrupts: + * + * RX: USART Receive Complete. Set when are unread data in the receive + * buffer and cleared when the receive buffer is empty. + */ + if (enable) { - /* Receive an interrupt when their is anything in the Rx data register (or an Rx - * timeout occurs). - */ - #ifndef CONFIG_SUPPRESS_SERIAL_INTS -# warning "Missing logic" + UCSR1B |= (1 << RXCIE1); #endif } else { -# warning "Missing logic" + UCSR1B &= ~(1 << RXCIE1); } } @@ -423,26 +439,37 @@ static void usart1_txint(struct uart_dev_s *dev, bool enable) { irqstate_t flags; + /* Enable/disable TX interrupts: + * + * TX: USART Transmit Complete. Set when the entire frame in the Transmit + * Shift Register has been shifted out and there are no new data + * currently present in the transmit buffer. + * DRE: USART Data Register Empty. Indicates if the transmit buffer is ready + * to receive new data: The buffer is empty, and therefore ready to be + * written. + */ + flags = irqsave(); if (enable) { /* Set to receive an interrupt when the TX data register is empty */ #ifndef CONFIG_SUPPRESS_SERIAL_INTS -# warning "Missing logic" + UCSR1B |= (1 << UDRIE1); +// UCSR1B |= (1 << TXCIE1); /* Fake a TX interrupt here by just calling uart_xmitchars() with * interrupts disabled (note this may recurse). */ - uart_xmitchars(dev); + uart_xmitchars(&g_usart1port); #endif } else { /* Disable the TX interrupt */ -# warning "Missing logic" + UCSR1B &= ~((1 << UDRIE1) | (1 << TXCIE1)); } irqrestore(flags); } @@ -478,13 +505,13 @@ void up_earlyserialinit(void) { /* Disable all USARTS */ - up_disableusartint(NULL); + usart1_disableusartint(NULL); /* Configuration whichever one is the console */ #ifdef HAVE_SERIAL_CONSOLE - CONSOLE_DEV.isconsole = true; - usart1_setup(&CONSOLE_DEV); + g_usart1port.isconsole = true; + usart1_setup(&g_usart1port); #endif } @@ -502,15 +529,12 @@ void up_serialinit(void) /* Register the console */ #ifdef HAVE_SERIAL_CONSOLE - (void)uart_register("/dev/console", &CONSOLE_DEV); + (void)uart_register("/dev/console", &g_usart1port); #endif /* Register all USARTs */ - (void)uart_register("/dev/ttyS0", &TTYS0_DEV); -#ifdef TTYS1_DEV - (void)uart_register("/dev/ttyS1", &TTYS1_DEV); -#endif + (void)uart_register("/dev/ttyS0", &g_usart1port); } /**************************************************************************** @@ -526,7 +550,7 @@ int up_putc(int ch) #ifdef HAVE_SERIAL_CONSOLE uint8_t imr; - up_disableusartint(priv, &imr); + usart1_disableusartint(&imr); /* Check for LF */ @@ -538,7 +562,7 @@ int up_putc(int ch) } up_lowputc(ch); - up_restoreusartint(priv, imr); + usart1_restoreusartint(imr); #endif return ch; } diff --git a/nuttx/arch/avr/src/atmega/atmega_config.h b/nuttx/arch/avr/src/atmega/atmega_config.h index 866680f0e..bf314ad49 100644 --- a/nuttx/arch/avr/src/atmega/atmega_config.h +++ b/nuttx/arch/avr/src/atmega/atmega_config.h @@ -68,6 +68,16 @@ # undef HAVE_SERIAL_CONSOLE #endif +/* Determine which (if any) console driver to use */ + +#if CONFIG_NFILE_DESCRIPTORS == 0 || defined(CONFIG_DEV_LOWCONSOLE) || !defined(HAVE_USART_DEVICE) +# undef CONFIG_USE_SERIALDRIVER +# undef CONFIG_USE_EARLYSERIALINIT +#elif defined(CONFIG_DEV_CONSOLE) && CONFIG_NFILE_DESCRIPTORS > 0 +# define CONFIG_USE_SERIALDRIVER 1 +# define CONFIG_USE_EARLYSERIALINIT 1 +#endif + /************************************************************************************ * Public Types ************************************************************************************/ diff --git a/nuttx/arch/avr/src/atmega/atmega_internal.h b/nuttx/arch/avr/src/atmega/atmega_internal.h index 339db5901..a062835bd 100644 --- a/nuttx/arch/avr/src/atmega/atmega_internal.h +++ b/nuttx/arch/avr/src/atmega/atmega_internal.h @@ -54,9 +54,6 @@ * Pre-processor Definitions ****************************************************************************/ -/* Bit-encoded input to atmega_configgpio() ********************************/ -# warning "Missing definitions" - /**************************************************************************** * Public Types ****************************************************************************/ @@ -139,36 +136,6 @@ EXTERN void up_consoleinit(void); EXTERN void up_boardinitialize(void); /**************************************************************************** - * Name: atmega_configgpio - * - * Description: - * Configure a GPIO pin based on bit-encoded description of the pin. - * - ****************************************************************************/ - -EXTERN int atmega_configgpio(uint16_t cfgset); - -/**************************************************************************** - * Name: atmega_gpiowrite - * - * Description: - * Write one or zero to the selected GPIO pin - * - ****************************************************************************/ - -EXTERN void atmega_gpiowrite(uint16_t pinset, bool value); - -/**************************************************************************** - * Name: atmega_gpioread - * - * Description: - * Read one or zero from the selected GPIO pin - * - ****************************************************************************/ - -EXTERN bool atmega_gpioread(uint16_t pinset); - -/**************************************************************************** * Name: gpio_irqinitialize * * Description: diff --git a/nuttx/arch/avr/src/atmega/atmega_lowconsole.c b/nuttx/arch/avr/src/atmega/atmega_lowconsole.c index e3277b98b..af558faa0 100644 --- a/nuttx/arch/avr/src/atmega/atmega_lowconsole.c +++ b/nuttx/arch/avr/src/atmega/atmega_lowconsole.c @@ -193,7 +193,7 @@ * ****************************************************************************/ -#ifdef CONFIG_ATMEGA_USART0 +#ifdef CONFIG_AVR_USART0 void usart0_reset(void) { /* Clear USART configuration */ @@ -214,7 +214,7 @@ void usart0_reset(void) } #endif -#ifdef CONFIG_ATMEGA_USART1 +#ifdef CONFIG_AVR_USART1 void usart1_reset(void) { /* Clear USART configuration */ diff --git a/nuttx/arch/avr/src/atmega/atmega_serial.c b/nuttx/arch/avr/src/atmega/atmega_serial.c index f55d22ec2..696cd5e9a 100644 --- a/nuttx/arch/avr/src/atmega/atmega_serial.c +++ b/nuttx/arch/avr/src/atmega/atmega_serial.c @@ -112,9 +112,10 @@ static int usart0_setup(struct uart_dev_s *dev); static void usart0_shutdown(struct uart_dev_s *dev); static int usart0_attach(struct uart_dev_s *dev); static void usart0_detach(struct uart_dev_s *dev); -static int usart0_interrupt(int irq, void *context); +static int usart0_rxinterrupt(int irq, void *context); +static int usart0_txinterrupt(int irq, void *context); static int usart0_ioctl(struct file *filep, int cmd, unsigned long arg); -static int usart0_receive(struct uart_dev_s *dev, uint32_t *status); +static int usart0_receive(struct uart_dev_s *dev, FAR unsigned int *status); static void usart0_rxint(struct uart_dev_s *dev, bool enable); static bool usart0_rxavailable(struct uart_dev_s *dev); static void usart0_send(struct uart_dev_s *dev, int ch); @@ -127,9 +128,10 @@ static int usart1_setup(struct uart_dev_s *dev); static void usart1_shutdown(struct uart_dev_s *dev); static int usart1_attach(struct uart_dev_s *dev); static void usart1_detach(struct uart_dev_s *dev); -static int usart1_interrupt(int irq, void *context); +static int usart1_rxinterrupt(int irq, void *context); +static int usart1_txinterrupt(int irq, void *context); static int usart1_ioctl(struct file *filep, int cmd, unsigned long arg); -static int usart1_receive(struct uart_dev_s *dev, uint32_t *status); +static int usart1_receive(struct uart_dev_s *dev, FAR unsigned int *status); static void usart1_rxint(struct uart_dev_s *dev, bool enable); static bool usart1_rxavailable(struct uart_dev_s *dev); static void usart1_send(struct uart_dev_s *dev, int ch); @@ -236,14 +238,26 @@ static uart_dev_t g_usart1port = #ifdef CONFIG_AVR_USART0 static void usart0_restoreusartint(uint8_t imr) { -# warning "Missing logic" + uint8_t regval; + + regval = UCSR0B; + regval &= ~((1 << RXCIE0) | (1 << TXCIE0) | (1 << UDRIE0)); + imr &= ((1 << RXCIE0) | (1 << TXCIE0) | (1 << UDRIE0)); + regval |= imr; + UCSR0B = regval; } #endif #ifdef CONFIG_AVR_USART1 static void usart1_restoreusartint(uint8_t imr) { -# warning "Missing logic" + uint8_t regval; + + regval = UCSR1B; + regval &= ~((1 << RXCIE1) | (1 << TXCIE1) | (1 << UDRIE1)); + imr &= ((1 << RXCIE1) | (1 << TXCIE1) | (1 << UDRIE1)); + regval |= imr; + UCSR1B = regval; } #endif @@ -254,14 +268,18 @@ static void usart1_restoreusartint(uint8_t imr) #ifdef CONFIG_AVR_USART0 static inline void usart0_disableusartint(uint8_t *imr) { -# warning "Missing logic" + uint8_t regval = UCSR0B; + *imr = regval; + regval &= ~((1 << RXCIE0) | (1 << TXCIE0) | (1 << UDRIE0)); } #endif #ifdef CONFIG_AVR_USART1 static inline void usart1_disableusartint(uint8_t *imr) { -# warning "Missing logic" + uint8_t regval = UCSR1B; + *imr = regval; + regval &= ~((1 << RXCIE1) | (1 << TXCIE1) | (1 << UDRIE1)); } #endif @@ -345,22 +363,44 @@ static void usart1_shutdown(struct uart_dev_s *dev) #ifdef CONFIG_AVR_USART0 static int usart0_attach(struct uart_dev_s *dev) { - /* Attach the USART0 IRQs */ + /* Attach the USART0 IRQs: + * + * RX: USART Receive Complete. Set when are unread data in the receive + * buffer and cleared when the receive buffer is empty. + * TX: USART Transmit Complete. Set when the entire frame in the Transmit + * Shift Register has been shifted out and there are no new data + * currently present in the transmit buffer. + * DRE: USART Data Register Empty. Indicates if the transmit buffer is ready + * to receive new data: The buffer is empty, and therefore ready to be + * written. + */ - return irq_attach(ATMEGA_IRQ_U0RX, usart0_interrupt); - return irq_attach(ATMEGA_IRQ_U0DRE, usart0_interrupt); - return irq_attach(ATMEGA_IRQ_U0TX, usart0_interrupt); + (void)irq_attach(ATMEGA_IRQ_U0RX, usart0_rxinterrupt); + (void)irq_attach(ATMEGA_IRQ_U0DRE, usart0_txinterrupt); +// (void)irq_attach(ATMEGA_IRQ_U0TX, usart0_txinterrupt); + return OK; } #endif -#ifdef CONFIG_AVR_USART0 -static int usart0_attach(struct uart_dev_s *dev) -{ - /* Attach the USART0 IRQs */ +#ifdef CONFIG_AVR_USART1 +static int usart1_attach(struct uart_dev_s *dev) +{ + /* Attach the USART1 IRQs: + * + * RX: USART Receive Complete. Set when are unread data in the receive + * buffer and cleared when the receive buffer is empty. + * TX: USART Transmit Complete. Set when the entire frame in the Transmit + * Shift Register has been shifted out and there are no new data + * currently present in the transmit buffer. + * DRE: USART Data Register Empty. Indicates if the transmit buffer is ready + * to receive new data: The buffer is empty, and therefore ready to be + * written. + */ - return irq_attach(ATMEGA_IRQ_U1RX, usart1_interrupt); - return irq_attach(ATMEGA_IRQ_U1DRE, usart1_interrupt); - return irq_attach(ATMEGA_IRQ_U1TX, usart1_interrupt); + (void)irq_attach(ATMEGA_IRQ_U1RX, usart1_rxinterrupt); + (void)irq_attach(ATMEGA_IRQ_U1DRE, usart1_txinterrupt); +// (void)irq_attach(ATMEGA_IRQ_U1TX, usart1_txinterrupt); + return OK; } #endif @@ -378,121 +418,121 @@ static int usart0_attach(struct uart_dev_s *dev) static void usart0_detach(struct uart_dev_s *dev) { /* Disable all USART0 interrupts */ -# warning "Missing logic" + + usart0_disableusartint(NULL); /* Detach the USART0 IRQs */ - return irq_detach(ATMEGA_IRQ_U0RX); - return irq_detach(ATMEGA_IRQ_U0DRE); - return irq_detach(ATMEGA_IRQ_U0TX); + (void)irq_detach(ATMEGA_IRQ_U0RX); + (void)irq_detach(ATMEGA_IRQ_U0DRE); +// (void)irq_detach(ATMEGA_IRQ_U0TX); } #endif #ifdef CONFIG_AVR_USART1 static void usart1_detach(struct uart_dev_s *dev) { - /* Disable all USART0 interrupts */ -# warning "Missing logic" + /* Disable all USART1 interrupts */ - /* Detach the USART0 IRQs */ + usart1_disableusartint(NULL); + + /* Detach the USART1 IRQs */ - return irq_deattach(ATMEGA_IRQ_U1RX); - return irq_deattach(ATMEGA_IRQ_U1DRE); - return irq_deattach(ATMEGA_IRQ_U1TX); + (void)irq_detach(ATMEGA_IRQ_U1RX); + (void)irq_detach(ATMEGA_IRQ_U1DRE); +// (void)irq_detach(ATMEGA_IRQ_U1TX); } #endif /**************************************************************************** - * Name: usart0/1_interrupt + * Name: usart0/1_rxinterrupt * * Description: - * This is the USART interrupt handler. It will be invoked when an - * interrupt received on the 'irq' It should call uart_transmitchars or - * uart_receivechar to perform the appropriate data transfers. The - * interrupt handling logic must be able to map the 'irq' number into the - * approprite uart_dev_s structure in order to call these functions. + * This is the USART RX interrupt handler. It will be invoked when an + * RX interrupt received. It will call uart_receivechar to perform the RX + * data transfers. * ****************************************************************************/ #ifdef CONFIG_AVR_USART0 -static int usart0_interrupt(int irq, void *context) +static int usart0_rxinterrupt(int irq, void *context) { - uint8_t csr; - int passes; - bool handled; + uint8_t ucsr0a = UCSR0A; - /* Loop until there are no characters to be transferred or, - * until we have been looping for a long time. - */ + /* Handle incoming, receive bytes (with or without timeout) */ - handled = true; - for (passes = 0; passes < 256 && handled; passes++) + if ((ucsr0a & (1 << RXC0)) != 0) { - handled = false; + /* Received data ready... process incoming bytes */ -# warning "Missing logic" - /* Handle incoming, receive bytes (with or without timeout) */ + uart_recvchars(&g_usart0port); + } -# warning "Missing logic" - { - /* Received data ready... process incoming bytes */ + return OK; +} +#endif - uart_recvchars(dev); - handled = true; - } +#ifdef CONFIG_AVR_USART1 +static int usart1_rxinterrupt(int irq, void *context) +{ + uint8_t ucsr1a = UCSR1A; - /* Handle outgoing, transmit bytes */ + /* Handle incoming, receive bytes (with or without timeout) */ -# warning "Missing logic" - { - /* Transmit data regiser empty ... process outgoing bytes */ + if ((ucsr1a & (1 << RXC1)) != 0) + { + /* Received data ready... process incoming bytes */ - uart_xmitchars(dev); - handled = true; - } + uart_recvchars(&g_usart1port); } - return OK; + + return OK; } #endif -#ifdef CONFIG_AVR_USART1 -static int usart1_interrupt(int irq, void *context) +/**************************************************************************** + * Name: usart0/1_txinterrupt + * + * Description: + * This is the USART TX interrupt handler. It will be invoked when an + * TX or DRE interrupt received. It will call uart_xmitchars to perform + * the TXdata transfers. + * + ****************************************************************************/ + +#ifdef CONFIG_AVR_USART0 +static int usart0_txinterrupt(int irq, void *context) { - uint8_t csr; - int passes; - bool handled; + uint8_t ucsr0a = UCSR0A; - /* Loop until there are no characters to be transferred or, - * until we have been looping for a long time. - */ + /* Handle outgoing, transmit bytes */ - handled = true; - for (passes = 0; passes < 256 && handled; passes++) + if ((ucsr0a & (1 << TXC0)) != 0) { - handled = false; + /* Transmit data regiser empty ... process outgoing bytes */ -# warning "Missing logic" - /* Handle incoming, receive bytes (with or without timeout) */ + uart_xmitchars(&g_usart0port); + } -# warning "Missing logic" - { - /* Received data ready... process incoming bytes */ + return OK; +} +#endif - uart_recvchars(dev); - handled = true; - } +#ifdef CONFIG_AVR_USART1 +static int usart1_txinterrupt(int irq, void *context) +{ + uint8_t ucsr1a = UCSR1A; - /* Handle outgoing, transmit bytes */ + /* Handle outgoing, transmit bytes */ -# warning "Missing logic" - { - /* Transmit data regiser empty ... process outgoing bytes */ + if ((ucsr1a & (1 << TXC1)) != 0) + { + /* Transmit data regiser empty ... process outgoing bytes */ - uart_xmitchars(dev); - handled = true; - } + uart_xmitchars(&g_usart1port); } - return OK; + + return OK; } #endif @@ -561,13 +601,13 @@ static int usart1_ioctl(struct file *filep, int cmd, unsigned long arg) ****************************************************************************/ #ifdef CONFIG_AVR_USART0 -static int usart0_receive(struct uart_dev_s *dev, uint32_t *status) +static int usart0_receive(struct uart_dev_s *dev, FAR unsigned int *status) { /* Return status information */ if (status) { - *status = (uint32_t)UCSR0A; + *status = (FAR unsigned int)UCSR0A; } /* Then return the actual received byte */ @@ -577,13 +617,13 @@ static int usart0_receive(struct uart_dev_s *dev, uint32_t *status) #endif #ifdef CONFIG_AVR_USART1 -static int usart1_receive(struct uart_dev_s *dev, uint32_t *status) +static int usart1_receive(struct uart_dev_s *dev, FAR unsigned int *status) { /* Return status information */ if (status) { - *status = (uint32_t)UCSR1A; + *status = (FAR unsigned int)UCSR1A; } /* Then return the actual received byte */ @@ -603,19 +643,21 @@ static int usart1_receive(struct uart_dev_s *dev, uint32_t *status) #ifdef CONFIG_AVR_USART0 static void usart0_rxint(struct uart_dev_s *dev, bool enable) { + /* Enable/disable RX interrupts: + * + * RX: USART Receive Complete. Set when are unread data in the receive + * buffer and cleared when the receive buffer is empty. + */ + if (enable) { - /* Receive an interrupt when their is anything in the Rx data register (or an Rx - * timeout occurs). - */ - #ifndef CONFIG_SUPPRESS_SERIAL_INTS -# warning "Missing logic" + UCSR0B |= (1 << RXCIE0); #endif } else { -# warning "Missing logic" + UCSR0B &= ~(1 << RXCIE0); } } #endif @@ -623,19 +665,21 @@ static void usart0_rxint(struct uart_dev_s *dev, bool enable) #ifdef CONFIG_AVR_USART1 static void usart1_rxint(struct uart_dev_s *dev, bool enable) { + /* Enable/disable RX interrupts: + * + * RX: USART Receive Complete. Set when are unread data in the receive + * buffer and cleared when the receive buffer is empty. + */ + if (enable) { - /* Receive an interrupt when their is anything in the Rx data register (or an Rx - * timeout occurs). - */ - #ifndef CONFIG_SUPPRESS_SERIAL_INTS -# warning "Missing logic" + UCSR1B |= (1 << RXCIE1); #endif } else { -# warning "Missing logic" + UCSR1B &= ~(1 << RXCIE1); } } #endif @@ -677,8 +721,8 @@ static void usart0_send(struct uart_dev_s *dev, int ch) } #endif -#ifdef CONFIG_AVR_USART0 -static void usart0_send(struct uart_dev_s *dev, int ch) +#ifdef CONFIG_AVR_USART1 +static void usart1_send(struct uart_dev_s *dev, int ch) { UDR1 = ch; } @@ -697,26 +741,37 @@ static void usart0_txint(struct uart_dev_s *dev, bool enable) { irqstate_t flags; + /* Enable/disable TX interrupts: + * + * TX: USART Transmit Complete. Set when the entire frame in the Transmit + * Shift Register has been shifted out and there are no new data + * currently present in the transmit buffer. + * DRE: USART Data Register Empty. Indicates if the transmit buffer is ready + * to receive new data: The buffer is empty, and therefore ready to be + * written. + */ + flags = irqsave(); if (enable) { /* Set to receive an interrupt when the TX data register is empty */ #ifndef CONFIG_SUPPRESS_SERIAL_INTS -# warning "Missing logic" + UCSR0B |= (1 << UDRIE0); +// UCSR0B |= (1 << TXCIE0); /* Fake a TX interrupt here by just calling uart_xmitchars() with * interrupts disabled (note this may recurse). */ - uart_xmitchars(dev); + uart_xmitchars(&g_usart0port); #endif } else { /* Disable the TX interrupt */ -# warning "Missing logic" + UCSR0B &= ~((1 << UDRIE0) | (1 << TXCIE0)); } irqrestore(flags); } @@ -727,26 +782,37 @@ static void usart1_txint(struct uart_dev_s *dev, bool enable) { irqstate_t flags; + /* Enable/disable TX interrupts: + * + * TX: USART Transmit Complete. Set when the entire frame in the Transmit + * Shift Register has been shifted out and there are no new data + * currently present in the transmit buffer. + * DRE: USART Data Register Empty. Indicates if the transmit buffer is ready + * to receive new data: The buffer is empty, and therefore ready to be + * written. + */ + flags = irqsave(); if (enable) { /* Set to receive an interrupt when the TX data register is empty */ #ifndef CONFIG_SUPPRESS_SERIAL_INTS -# warning "Missing logic" + UCSR1B |= (1 << UDRIE1); +// UCSR1B |= (1 << TXCIE1); /* Fake a TX interrupt here by just calling uart_xmitchars() with * interrupts disabled (note this may recurse). */ - uart_xmitchars(dev); + uart_xmitchars(&g_usart1port); #endif } else { /* Disable the TX interrupt */ -# warning "Missing logic" + UCSR1B &= ~((1 << UDRIE1) | (1 << TXCIE1)); } irqrestore(flags); } @@ -792,9 +858,11 @@ void up_earlyserialinit(void) { /* Disable all USARTS */ - usart0_disableusartint(TTYS0_DEV.priv, NULL); -#ifdef TTYS1_DEV - usart0_disableusartint(TTYS1_DEV.priv, NULL); +#ifdef CONFIG_AVR_USART1 + usart0_disableusartint(NULL); +#endif +#ifdef CONFIG_AVR_USART1 + usart1_disableusartint(NULL); #endif /* Configuration whichever one is the console */ @@ -802,9 +870,9 @@ void up_earlyserialinit(void) #ifdef HAVE_SERIAL_CONSOLE CONSOLE_DEV.isconsole = true; # if defined(CONFIG_USART0_SERIAL_CONSOLE) - usart0_setup(&CONSOLE_DEV); + usart0_setup(&g_usart0port); # elif defined(CONFIG_USART1_SERIAL_CONSOLE) - usart1_setup(&CONSOLE_DEV); + usart1_setup(&g_usart1port); # endif #endif } @@ -842,12 +910,19 @@ void up_serialinit(void) * ****************************************************************************/ +#ifdef HAVE_SERIAL_CONSOLE +#endif + int up_putc(int ch) { #ifdef HAVE_SERIAL_CONSOLE uint8_t imr; - up_disableusartint(&imr); +#if defined(CONFIG_USART0_SERIAL_CONSOLE) + usart0_disableusartint(&imr); +#else + usart1_cdisableusartint(&imr); +#endif /* Check for LF */ @@ -859,8 +934,14 @@ int up_putc(int ch) } up_lowputc(ch); - up_restoreusartint(imr); + +#if defined(CONFIG_USART0_SERIAL_CONSOLE) + usart0_restoreusartint(imr); +#else + usart1_restoreusartint(imr); #endif +#endif + return ch; } diff --git a/nuttx/arch/avr/src/avr/avr_internal.h b/nuttx/arch/avr/src/avr/avr_internal.h index c66103f00..21906c79d 100644 --- a/nuttx/arch/avr/src/avr/avr_internal.h +++ b/nuttx/arch/avr/src/avr/avr_internal.h @@ -76,7 +76,7 @@ extern volatile uint8_t *current_regs; * heap is CONFIG_DRAM_END */ -extern uint8_t g_heapbase; +extern uint16_t g_heapbase; #endif /* __ASSEMBLY__ */ |